PROMPT ENGINEERING P.O. BOX BARWA VILLAGE, WAKRA, BUILDING NO. 6 SHOP NO. 19 AND 20 DOHA QATAR
|
|
- Pierce Gilmore
- 5 years ago
- Views:
Transcription
1 This is to attest that PROMPT ENGINEERING P.O. BOX BARWA VILLAGE, WAKRA, BUILDING NO. 6 SHOP NO. 19 AND 20 DOHA QATAR Calibration Laboratory CL-165 has met the requirements of AC204, IAS Accreditation Criteria for Calibration Laboratories, and has demonstrated compliance with the ISO/IEC Standard 17025:2005, General requirements for the competence of testing and calibration laboratories. This organization is accredited to provide the services specified in the scope of accreditation maintained on the IAS website ( This certificate is valid up to January 1, (See laboratory s scope of accreditation for fields of calibration and accredited calibration.) This accreditation certificate supersedes any IAS accreditation bearing an earlier effective date. The certificate becomes invalid upon suspension, cancellation or revocation of accreditation. See for current accreditation information, or contact IAS at C.P. Ramani, P.E., C.B.O President
2 IAS Accreditation Number CL-165 Company Name Prompt Engineering & Trading Services Co. W.L.L. Address P.O. Box 24067, Barwa Village, Wakra, Building No. 6, Shop No. 19 And 20, Doha, Qatar Contact Name Bibin Philip Quality / Technical Manager Telephone Effective Date of Scope April 18, 2017 Accreditation Standard ISO/IEC 17025:2005 CALIBRATION TECHNIQUE, REFERENCE STANDARD, External Micrometer Caliper (Vernier/Dial/ Electronics) Dimensional 0 mm to 150 mm/ 0.01 mm 6.0 µm 0 mm to 150 mm/ mm 1.9 µm 0 mm to 300 mm/ 0.01 mm 9.0 µm 0 mm to 300 mm/ 0.02 mm 17.8 µm Using slip gauge set Grade 0, optical parallel and optical flat 0 mm to 600 mm/ 0.01 mm 11.0 µm Using surface plate, Height Gauge Grade 0 slip gauge set 0 mm to 600 mm/ 0.02 mm 15.0 µm and length bars Thickness Gauge 0 mm to 5 mm/ mm 1.0 µm Using Slip gauge set 0 mm to 25 mm/ 0.01 mm 5.9 µm Grade 0 0 mm to 50 mm/ 0.01 mm 6.0 µm Feeler Gauge 0.01 mm to 2 mm 2.7 µm Using Digital Micrometer Standard Foils 0 m to 5000 m 2.6 µm Using Digital Micrometer Mechanical (Pneumatic) and Vacuum Gauge (Dial/Digital) and Recorder/ Transducer/ Safety Valve / Vacuum Gauge (Dial/Digital) and Recorder/ Transducer/ Safety Valve (Hydraulic) Gauge (Dial/Digital) and Recorder bar to 0 bar/ 0.01 bar 1.47% FS 0 bar to 120 bar/ 0.01 bar 0.57% FS 0 bar to 200 bar/ 0.01 bar 0.57% FS 0 bar to 700 bar/ 0.01 bar 0.030% FS 700 bar to 1200 bar/ 0.1 bar 0.39% FS Using DH Budenberg P542 pneumatic calibrator (N 2 gas), FLUKE 719 Pro Cal Fluke P M Comparator with Reference pressure gauge, Fluke 2700G G20M Using DH Budenberg H542/409 hydraulic Deadweight Tester Page 1 of 8
3 Transducer Vibration Vibration Meter/Analyzer Acoustic At Laboratory Sound Level Meter Sound Level Calibrator Velocity At Laboratory Hot Wire, Vane Type and Pitot Tube Anemometer Recorder/ with Sensor/ Thermometer/Th ermocouple/rtd Sensor/ Gauge/ Transmitter Infrared Thermometer Oven/Incubator/ Freezer DC Current 10 m/s m/s 2 Using Calibration exciter Type 4294, Bruel and Kjaer Make 94 db and khz/ 1 db 94 db and khz/ 0.1 db 2.5 m/s to 15 m/s/ 0.1 m/s 30 C to 660 C/ C Thermal 1.7 db 1.4 db Using Vane anemometer: m/s Using Pitot: m/s 0.25 C Using Cirrus research CR511F and CR514 acoustic calibrator Using Cirrus CR162c sound level meter Using WTM 1000, Laboratory grade, Bench top mini wind tunnel, Omega make and reference anemometer and reference pitot tube Using FLUKE 9144 Dry Block Metrology Well, Fluke 7103 Micro Bath with Fluke 5628 PRT Secondary Standard -15 C to 120 C/ 0.01 C 0.7 C Using FLUKE 4180 IR 50 C to 500 C / 0.1 C 1 C calibrator, Fluke 9132 IR Calibrator Using FLUKE C to 419 C/ C 0.63 C temperature calibrator with FLUKE 5615 PRT secondary standard Electrical/DC/Low Frequency 0 µa to µa/1 na 0.04% RDG 0 ma to ma/ 0.01 µa 0.02% RDG Using FLUKE 5522 A, 0 ma to ma/ 0.1 µa 0.06% RDG multifunction calibrator 0 ma to ma/ 0.02% RDG 1 µa 0 A to A/ 10 µa 0.06% RDG 1.1 A to A/ 10 µa 0.11% RDG 0 A to A/ 100 µa 0.08% RDG 11 A to 20.5 A/ 100 µa 0.08% RDG Using 50 Turn current coil Page 2 of 8
4 AC Voltage AC Current DC Voltage Resistance (2 wire and 4 wire) Resistance (2 wire and 4 wire) 300 A to 1000 A/ 1 A 0.5% RDG 1.0 mv to Hz to 500 Hz/ 1 µv 0.14% RDG 33 mv to Hz to 500 khz/ 1 µv 0.1% RDG 0.33 V to Hz to 500 khz/10 µv 0.08% RDG 3.3 V to Hz to 100 khz/ 100 µv 0.08% RDG 33 V to Hz to 100 khz/ 1 mv 0.08% RDG 330 V to Hz to 10 khz/ 10 mv 0.063% RDG ma to ma/ 0.01 µa 0.09% RDG 0.33 ma to ma/ 0.01 µa 0.110% RDG 3.3 ma to ma/ 0.1 µa 0.27% RDG 33 ma to ma/ 1 µa 0.06% RDG 0.33 A to A/ 10 µa 0.08% RDG 3 A to 20.5 A/ 100 µa 0.19% RDG 300 A to 1000 A/ 1 A 1.3% RDG 0 mv to mv/ 0.1 µv 0.1% RDG 0 V to V/ 1 µv 0.06% RDG 0 V to V/ 10 µv 0.06% RDG 30 V to V/ 100 µv 0.015% RDG 100 V to V/ 1000 µv 0.015% RDG 0 to / % RDG 11 to / % RDG 33 to / % RDG 110 to / % RDG 330 k to k / % RDG 1.1 k to k / % RDG 3.3 k to k / % 11 k to k / % 33 k to 2.0% RDG Multifunction Calibrator Direct Method Using FLUKE 9100 and 5522A multifunction calibrator Using 50 Turn current coil Using FLUKE 5522 A Page 3 of 8
5 Frequency Capacitance Simulation indicator/ / Kit/ Universal k / k to k / % 330 k to M / 1 2.4% RDG 1.1 M to M / 1 2.4% RDG 3.3 M to M / % RDG 11 M to M / % RDG 33 M to M / % RDG 110 M to M / % RDG 330 M to 1100 M / % RDG 0.01 Hz to Hz/ 0.01 Hz 0.01% RDG Hz to Hz/ 0.1 Hz 0.011% RDG khz to khz/ 1.0 Hz 0.29% RDG khz to khz/ 10 Hz 0.29% RDG khz to khz/ 100 Hz 0.12% RDG MHz to MHz/ 1 khz 0.12% RDG 220 pf to pf/ 0.1 pf 0.6% RDG 0.4 nf to nf/ 0.1 pf 0.6% RDG 1.1 nf to nf/ 0.1 pf 0.6% RDG 3.3 nf to nf/ 0.1 pf 0.6% RDG 11 nf to nf/ 0.1 pf 0.6% RDG 33 nf to nf/ 1 pf 0.6% RDG 110 nf to nf/ 1 pf 0.6% RDG 0.33 µf to µf/ 10 pf 0.6% RDG 1.1 µf to µf/ 10 pf 0.6% RDG 3.3 µf to µf/ 100 pf 3.1% RDG 11 µf to µf/ 100 pf 3.1% RDG 33 µf to µf/ 1 nf 3.1% RDG 110 µf to µf/ 1 nf 3.1% RDG 0.33 mf to mf/ 10 nf 3.1% RDG 200 o C to 800 o C, Pt 385, 100 / C Pt 3926, 100 / C Pt 3916, 100 / C Pt 385, 200 / C Page 4 of 8
6 Simulation indicator/ / (continued) DC Voltage Measure AC Voltage 50 Hz DC Current Measure Pt 385, 500 / C Pt 385, 1000 / C -80 o C to 260 o C, Pt Ni 385, 120 (Ni120)/ C -100 o C to 260 o C, Cu 427, 10 [3]/ C 600 o C to 1820 C, B Type/ 0.01 C 0 o C to 2316 C, C Type/ 0.01 C 250 o C to 1000 C, E Type/ 0.01 C 210 o C to 1200 C, J Type/ 0.01 C 250 o C to 1372 C, K Type/ 0.01 C 200 o C to 900 C, L Type/ 0.01 C 200 o C to 1300 C, N Type/ 0.01 C 0 o C to 1767 C, R Type/ 0.01 C 0 o C to 1767 C, S Type/ 0.01 C 250 o C to 400 C, T Type/ 0.01 C 200 o C to 600 C, U Type/ 0.01 C 100 mv/100 nv 0.006% RDG 1 V/ 1 µv 0.006% RDG 10 V/ 10 µv 0.006% RDG 100 V/100 µv 0.006% RDG Using FLUKE 9100 and 5522A multifunction calibrator 1000 V/ 1 mv 0.02% RDG 100 mv/ 100 nv 0.11% RDG 1 V/ 1 µv 0.11% RDG 10 V/ 10 µv 0.33% RDG 100 V/ 100 µv 0.33% RDG 1000 V/ 1 mv 0.33% RDG 100 µa/ 100 pa 0.35% RDG 1 ma/ 1 na 0.35% RDG 10 ma/ 10 na 0.35% RDG Page 5 of 8
7 AC Current 50 Hz Resistance Measure Frequency Measure (RTD Pt 100) Capacitance 100 ma/ 100 na 0.064% RDG 1 A/ 1 µa 0.08% RDG 3 A/ 10 µa 0.18% RDG 10 A/ 10 µa 0.18% RDG 100 µa/ 100 pa 0.42% RDG 1 ma/ 1 na 0.42% RDG 10 ma/10 na 0.42% RDG 100 ma/ 100 na 0.42% RDG 1 A/ 1 µa 0.16% RDG 3 A/ 10 µa 0.29% RDG 10 A/ 10 µa 0.29% RDG 10 / 10 µ 0.36% RDG 100 / 100 µ 0.023% RDG 1 k / 1 m 0.023% RDG 10 k / 10 m 0.073% RDG 100 k / 100 m 0.073% RDG 1 M / % RDG 10 M / % RDG 100 M / % RDG 1.0 G / 1 k 1.37% RDG 5 Hz to 1 MHz 0.12% RDG 200 C to 600 C 0.26 C 1 nf to 1 F 1.8% RDG 1 F to 100 mf 1.8% RDG 200 o C to 800 o C, Pt 385, 100 / C Using FLUKE and 5522A Pt 3926, 100 / C Measure Mode Pt 3916,100 / C Pt 385, 200 / C Pt 385, 500 / C Pt 385, 1000 / C -80 o C to 260 o C, Pt Ni 385, 120 (Ni120) / C -100 o C to 260 o C, Using FLUKE and 5522A Measure Mode Page 6 of 8
8 Cu 427, 10 [3]/ C 600 o C to 1820 C, B Type/ 0.01 C 0 o C to 2316 C, C Type/ 0.01 C 250 C to 1000 C, E Type/ 0.01 C 210 C to 1200 C, J Type/ 0.01 C 250 C to 1372 C, K Type/ 0.01 C 200 C to 900 C, L Type/ 0.01 C 200 C to 1300 C, N Type/ 0.01 C 0 C to 1767 C, R Type/ 0.01 C 0 C to 1767 C, S Type/ 0.01 C 250 C to 400 C, T Type/ 0.01 C 200 C to 600 C, U Type/ 0.01 C -200 C to 630 C, Pt 385, 500 / C -200 C to 630 C, Pt 385, 1000 / C -80 C to 260 C, PtNi 385, 120 (Ni120)/ C -100 C to 260 C, Cu 427, 10 [3]/ C 600 C to 1820 C, B Type/ 0.01 C 0 C to 2316 C, C Type/ 0.01 C 250 C to 1000 C, E Type/ 0.01 C 210 C to 1200 C, J Type/ 0.01 C 250 C to 1372 C, K Type/ 0.01 C 200 C to 900 C, L Type/ 0.01 C Using FLUKE and 5522A Measure Mode Page 7 of 8
9 200 C to 1300 C, N Type/ 0.01 C 0 C to 1767 C, R Type/ 0.01 C 0 C to 1767 C, S Type/ 0.01 C 250 C to 400 C, T Type/ 0.01 C 200 C to 600 C, U Type/ 0.01 C Using FLUKE and 5522A Measure Mode 1 Calibration and Measurement Capability is the smallest uncertainty of measurement that a laboratory can achieve within its scope of accreditation (at a confidence level of 95% with a coverage factor of 2) Page 8 of 8
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ALDINGER COMPANY 1440 Prudential Drive Dallas, TX 75235 Timothy R. Detten Phone: 214 638 1808 CALIBRATION Valid To: July 31, 2018 Certificate
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Garber Metrology Weighing Solutions & Precision
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that SP Metrology System Thailand Co., LTD 88/115
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Torreón, Coahuila, México C.P. 27019 (Hereinafter
More informationLaboratory Accreditation Programmes
Laboratory Address 38J Angle Street, Onehunga, Auckland, 1061 Telephone 09 636-4999 URL Authorised Representative www.cps.co.nz Ms Kirsty Russell Laboratory Manager Client No. 927 Programme Accreditation
More informationPage 1 of 5. United Testing Systems, Inc S. Acacia Avenue Fullerton, CA William Warner, Quality Manager
IAS Accreditation Number Accredited Entity Address CL-128 1375 S. Acacia Avenue Fullerton, CA 92831 William Warner, Quality Manager Contact Name Telephone +1 (714) 638-2322 Effective Date of Scope July
More informationAccurate Measurements, Plot No.103, D Block, Meethapur Ext., Badarpur, New Delhi. Discipline Mechanical Calibration Issue Date
Last Amended on 11.11.2014 Page 1 of 6 I. DIMENSION 1. Dial/ Digital Vernier Caliper $ L.C.: 0.01mm Φ 0 to 200 mm 7.5 µm Using Slip Gauge Set & L.C.: 0.01mm Φ 0 to 300 mm 12.17 µm Using Slip Gauges & Caliper
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORYACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 EUSTIS CO., INC./PYROCOM CALIBRATION LAB 12407-B Mukilteo Speedway Lynnwood, WA 98087 Bill LeMesurier Phone: 425 423 9996 CALIBRATION
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 RS CALIBRATION SERVICES, INC. 1047 Serpentine Lane Pleasanton, CA 94566 Mr. Ralph Sabiel Phone: 925 462 4217 CALIBRATION Valid To: June
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 QUALITY CONTROL SERVICES, INC. 2340 SE 11 th Avenue Portland, OR 97214 George Cahill Phone: 503 236 2712 CALIBRATION Valid To: September
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 RS CALIBRATION SERVICES, INC. 1047 Serpentine Lane Pleasanton, CA 94566 Mr. Ralph Sabiel Phone: 925 462 4217 CALIBRATION Valid To: September
More informationHi-Tech Calibration, 307, 3rd Floor, Govinda Complex, Char Rasta, Vapi, Gujarat. Discipline Mechanical Calibration Issue Date
Last Amended on 18.01.2016 Page 1 of 7 I. DIMENSIONS 1. CALIPER $ (Vernier, Dial, Electronics) L.C.0.01 mm up to 1000mm 24 µm Using Caliper Checker / L.C.0.02 mm up to 600mm 19 µm Length Bars /Slip Gauges
More informationAccredited Laboratory
Accredited Laboratory A2LA has accredited CAL-RITE CORPORATION Naperville, IL for technical competence in the field of Calibration This laboratory is accredited in accordance with the recognized International
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0393 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I. DIMENSION 1. Vernier Caliper (Digital/ Dial/ Scale) $ L.C.: 0.01 mm 0 to 150 mm 7.7 µm Using Caliper Checker 0 to 200 mm 8.1 µm 0 to 300 mm 9.3 µm 0 to 600 mm 13.9 µm 2.
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CAL-RITE CORPORATION 1665 Quincy Avenue, Suite 103 Naperville, IL 60540 Michael Crosby Phone: 630 355 1522 CALIBRATION Valid To: December
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0752 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I DIMENSION 1. Caliper $ (Vernier/Dial/Digital) LC : 0.01mm 0 to 600 mm 0 to 1000 mm 12.2 µm 13.3 µm Using Caliper Checker, Slip Gauge Block & 2. Depth Caliper $ (Vernier/Dial/Digital)
More informationInstitute for Design of Electrical Measuring Instruments, Swatantryaveer Tatya Tope Marg, Chunabhatti, Sion, Mumbai, Maharashtra
Last Amended on 02.09.2014 Page 1 of 10 I. DIMENSION 1 Calipers $ Up to 600 mm 10.4 µm Using Caliper Checker by Up to 1000 mm 13.2 µm Using Long Slip Gauge by 2 Height Gauges $ Up to 600 mm 12.8 µm Using
More informationSchedule. 200 C to 400 C. 400 C to 660 C C to 800 C C to 1300 C C to 1200 C. 0 C to 1700 C. 0 C to 1700 C.
Page: 1 of 9 LABORATORY LOCATION: (PERMANENT LABORATORY) PPCALIBRATION SERVICES SDN. BHD. NO. 15, MEDAN BUKIT EMAS PUSAT PERNIAGAAN BUKIT EMAS 14000 BUKIT MERTAJAM, PULAU PINANG MALAYSIA This laboratory
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationAlcalab Private Limited, 3rd Floor, Ashiana Trade Centre, Adityapur, Jamshedpur, Jharkhand. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 11 I. DIMENSIONS 1. SLIP 0.5 mm to 25 mm 0.25 μm Using Slip Gauge (K-Grade) & > 25 mm to 50 mm 0.34 μm Double Probe Comparator > 50 mm to 75 mm 0.46 μm > 75 mm to 100 mm 0.58
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: UNEX/HYTORC, 333 Route 17 North, Mahwah, NJ 07430
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Monterrey, Nuevo León, 64920 (Hereinafter called the
More information7526A Precision Process Calibrator. Calibrate temperature, pressure, and low dc voltage process tools in a single benchtop instrument
7526A Precision Process Calibrator Calibrate temperature, pressure, and low dc voltage process tools in a single benchtop instrument The 7526A Precision Process Calibrator calibrates a wide range of pressure
More informationDate of Initial Accreditation Latest Date of Issue
Name of Accreditation Program Accreditation No. JCSS Accreditation Program JCSS0058 Date of Initial Accreditation 1995-06-21 Latest Date of Issue 2018-02-02 Name and Address of Accredited Organization
More informationSCOPE OF ACCREDITATION TO ISO/IEC & KS Q ISO/IEC
SCOPE OF ACCREDITATION TO ISO/IEC 17025-2005 & KS Q ISO/IEC 17025-2006 Korea Instrument Co., Ltd. Branch 45, Gwangjang-ro 56beon-gil, Sasang-gu, Busan 46976 Phone : 051-322-0880, Fax : 051-322-4066, E-mail
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 RIVERVIEW CALIBRATION SERVICES, LTD 5706 Veto Road Belpre, OH 45714 J. Michael Pennell Phone: 740 678 8625 CALIBRATION Valid To: July
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0208 Valid Until Last Amended on
Last Amended on 12.08.2016 Page 1 of 7 I. DIMENSION (Basic Measuring, Gauge etc.) 1. CALIPER $ (Vernier / Dial / Digital) L.C.: 10 µm ф L.C.: 50 µm ф Upto 600mm 13 m Using Gauge Block Set Grade 0 (Carbide);
More informationScope of Accreditation For Global Instrumentation Services, LLC 523 N. Sam Houston Parkway E, Suite 230 Houston, TX Gavin Lewis
Scope of Accreditation For Global Instrumentation Services, LLC 523 N. Sam Houston Parkway E, Suite 230 Houston, TX 77060 Gavin Lewis 832-428-2737 In recognition of a successful assessment to ISO/IEC 17025:2005
More informationShriram Institute For Industrial Research, 14-15, Sadarmangala Industrial Area, Whitefield Road, Bangalore, Karnataka
Certificate Number CC-2083 (in lieu of C-0216, C-0304, C-1497) Page 1 of 7 ELECTRO-TECHNICAL CALIBRATION I. MEASURE 1. Time $ 5 sec to 9900 sec 0.12 sec to 5.8 sec Using Digital Time Totalizer (Digital
More informationQ-Tech Engineering Services, S-134, C/o, Precision Engineering Works, MIDC, Bhosari, Pune, Maharashtra
Last Amended on 24.05.2015 Page 1 of 5 I. DIMENSION 1. EXTERNAL MICROMETER $ L.C. 1 µm Φ >100 mm to 300 mm 1.4 µm 3.0 µm Using Slip Gauge Blocks Gr '0' / Long Slip Gauges, by Comparison 2. DEPTH MICROMETER
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CRYSTAL ENGINEERING CORPORATION, AN AMETEK INC. COMPANY 708 Fiero Lane, Suite 9 San Luis Obispo, CA 93401 Janine White Phone: 805 595
More informationQA Tech (A Division of GMP Technical Solutions Pvt. Ltd.), L-73, Verna Industrial Estate, Verna Salcette, Goa
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER $ L.C. :-10µm Φ 0 to 300 mm 13 µm Using Caliper Checker; & T.C. Gauge Block Set by Comparison L.C. :- 20µm 0 to 1000 mm 22 µm Using Caliper Checker;
More informationCalitron Calibration Laboratory, U1: 207, Kohinoor Arcade, Tilak Chowk, Nigdi, Pune, Maharashtra
Last Amended on 12.09.2014 Page 1 of 7 I. MASS 1. Weights $ (Conventional Mass) 1 mg 0.015 mg Using Weights of 2 mg 0.015 mg accuracy Class F1 and 5 mg 0.015 mg 10 mg 0.015 mg 20 mg 0.020 mg 50 mg 0.020
More informationCALIBRATION SYSTEM CERTIFICATE
CALIBRATION SYSTEM CERTIFICATE With respect to products (measuring instruments and testing instruments), we hereby certify that we have established our calibration system traceable to the national (international)
More informationWelcome to Garber C O R P O R AT E O V E R V I E W
CORPORATE OVERVIEW Garber Metrology is one of the only companies in the Mid-Atlantic Region that combines full service weighing solutions, a wide range of calibration /metrology services and a broad scope
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 METTLER TOLEDO (INDUSTRIAL) 1900 Polaris Parkway Columbus, OH 43240 Frank Gardone Phone: 412 213 2263 CALIBRATION Valid To: April 30,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 METTLER TOLEDO (INDUSTRIAL) 1900 Polaris Parkway Columbus, OH 43240 Frank Gardone Phone: 412 213 2263 CALIBRATION Valid To: April 30,
More informationAccurate Labs, 311, 312 Govinda Complex, GIDC Char Rasta, Vapi, Valsad, Gujarat. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 9 I. DIMENSION 1. CALIPER $ Vernier L.C. 0.01mm 7.5 µm 9.0 µm Using Caliper Checker & Slip Gauges L.C. 0.05mm 29.5 µm 30.0 µm Dial / Electronic L.C. 0.02mm 12.5 µm 13.5 µm 2.
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Mexical Metrología, S.A. de C.V. Tecnología de Materiales,
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Chamber Commerce: 06073326 Location(s) where activities are performed under accreditation ad Office Smaragdstraat 7 7554 TD ngelo OV The Netherlands Location Abbreviation/ location Smaragdstraat 7 7554
More informationANAUM INTERNATIONAL ELECTRONICS LLC. Test and Measurement Calibration Services Test Bench.
ANAUM INTERNATIONAL ELECTRONICS LLC Test and Measurement Calibration Services Test Bench www.anaum.ae About Us Located in the Musaffah, Abu Dhabi, United Arab Emirates, Anaum International Electronics
More informationAutocal Solutions Pvt. Ltd., Plot No. BG-74, Gala No. 1 & 2, Jai Tulja Bhavani Indl. Premises, Telco Road, MIDC Bhosari, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER (Vernier/Dial/Digital) L. C. : 10µm Φ 0 to 600 mm 16 µm Using Caliper Checker & External Micrometer by 2. DEPTH GAUGE (Vernier/Dial/ Digital) L. C.
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELECTRICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY DETROIT - WARREN 11 MILE 1 27485 George Merrelli Drive Warren, MI 48092 Scott Stephen Karrer Phone: 586 754 9000 ext. 32900 Email:
More informationA.A. Calibration Pvt. Ltd., 13-C/18, Vasundhara Haat, Vasundhara, Ghaziabad, Uttar Pradesh. Discipline Mechanical Calibration Issue Date
Last Amended on 02.09.2014 Page 1 of 10 I. DIMENSION 1. VERNIER CALIPER $ L.C. 0.01mm 0 to 300 mm 0 to 600 mm 0 to 1000 mm 8 µm 14 µm 16 µm, Slip Gauge Accessories, Gauge Block L.C. 0.02 mm 0 to 1500 mm
More informationCal-Tech Calibration Services Pvt. Ltd., Flat No.8, Avadhut Heights, Anand Nagar, Sinhgad Road, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER $ L.C. :-10 µm 0 to 300 mm 12.0 µm Using Caliper Checker; Gauge 0 to 1000 mm 12.0 µm Block Set L.C. :-20 µm 0 to 600 mm 16.0 µm 0 to 1000 mm 20.0 µm
More informationICL Calibration And Testing Services, SCO - 37, Ground Floor, Sector-12, Panchkula, Haryana. Discipline Mechanical Calibration Issue Date
Last Amended on 09.12.2016 Page 1 of 8 I. DIMENSION (Basic Measuring, Gauge etc.) 1 LENGTH GAUGE/SETTING ROD $ Up to 100 mm >100 mm to 500 mm 1.5 µm 7.20 µm Using ULM, Gauge Block grade- 0 & Electronic
More informationASC300. Advanced Signal Calibrator. Process signal calibrator with superior accuracy. Specification Sheet
s i g n a l ASC300 Advanced Signal Calibrator Process signal calibrator with superior accuracy. Multi-function signal calibrator With high accuracy. Ideal for both field and maintenance shop use. Input
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MNP CORPORATION TECHNICAL AND RESEARCH SERVICES 1 (Corporate Facility) 44225 Utica Road Utica, MI 48317 Chad Clifford Phone: 586 254 1320 MECHANICAL Valid To:
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Energy Assurance, LLC 5202 Belle Wood Court,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. SCHAP LABORATORY SERVICES, LLC Taft Road, Unit 5 Spring Lake, MI Erik Johnson Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCHAP LABORATORY SERVICES, LLC 17309 Taft Road, Unit 5 Spring Lake, MI Erik Johnson Phone: 616 846 6530 MECHANICAL Valid To: June 30, 2020 Certificate Number:
More informationAnnex to the Accreditation Certificate D-K according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-K-15102-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 05.07.2017 to 04.07.2022 Date of issue: 05.07.2017
More informationTEST AND CALIBRATION SERVICES Ensuring quality and reliability.
> TEST AND CALIBRATION SERVICES Ensuring quality and reliability www.thalesgroup.com.au TEST AND CALIBRATION SERVICES ENSURING QUALITY AND RELIABILITY Introduction Thales Australia s Test and Calibration
More informationCaliber Gauges & Instruments Laboratory, S. No. 14/1, Dattadigamber Soc. B, Warje Jakat Naka, Pune, Maharashtra
Last Amended on - Page 1 of 10 I. DIMENSION (Basic Measuring, Gauge etc.) 1. PLAIN PLUG / WIDTH/ DEPTH/ Upto 100 mm 1.9 µm Using Electronic FLUSH PIN GAUGE DIAMETER /WIDTH / DEPTH $ 100 mm to 300 mm 3.8
More informationPage : 1 of 16. FIELD OF TESTING : Calibration and Measurement CALIBRATION & MEASUREMENT CAPABILITY EXPRESSED AS AN UNCERTAINITY *
Metrix Precision Pte Ltd Certificate No. : LA-2014-0581-C No. 23 Tagore Lane #02-03/04 Tagore 23 Warehouse Issue No. : 2 Singapore 787601 Date : 29 July 2016 FIELD OF TESTING : Calibration and Measurement
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MGA RESEARCH CORPORATION 4 446 Executive Drive Troy, MI 48083 Helen Kaleto Phone: 248 577 5001 Email: helen.kaleto@mgaresearch.com Website: www.mgaresearch.com
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT CLEVELAND 5405 East Schaaf Road Cleveland, OH 44131 Jeffry J Smith Phone: 216 524 1450 Jeffry.Smith@element.com MECHANICAL Valid To: October 31, 2018
More informationWe are engaged in manufacturing, supplying and trading Testing & Measuring Instruments (Electrical, Control & Instrumentation) Work Benches,
We are engaged in manufacturing, supplying and trading Testing & Measuring Instruments (Electrical, Control & Instrumentation) Work Benches, Temperature, Pressure & Marine Calibrator Kit, Thermal Imagers
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 NORTHERN BALANCE AND SCALE, INC. 9556 W. Bloomington Freeway Bloomington, MN 55431 Joey Kaluser Phone: 952 881 7716 CALIBRATION Valid
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INDEPENDENT ENGINEERING LABORATORIES, INC. 1 2400 E. South Street Jackson, MI 49201 Ms. Jessica Stremich Phone: 517 788 6590 E-mail: IELaccounting@ielinc.com
More informationPrüffeld der Schaltwerke
Report No.: 16-043-MS Sheet: 2 Notes 1. The testing station of the Siemens switchgear factory (Prüffeld der Schaltwerke),, Berlin, has been approved by the DAkkS (German accreditation body) for rendering
More informationCALIBRATION CERTIFICATES
CALIBRATION CERTIFICATES Calibration certificates - temperature and pressure - sensor deviation reduced to zero The patented ALMEMO measuring technology from Ahlborn has proved itself many times over in
More informationRe: Extension for ISO/IEC 17025: 2005 accreditation Certificates #ACT-1997, ACT , ACT & AT
October 17, 2017 VIA EMAIL Link Engineering Company Jim Villella 401 Southfield Road Dearborn, MI 48120 Re: Extension for ISO/IEC 17025: 2005 accreditation Certificates #ACT-1997, ACT-1997.01, ACT-1997.02
More informationPTC8001 Temperature Calibrator
PTC8001 Temperature Calibrator Table of Contents 1. Introduction....................1 1.1 Customer Service................1 1.2 Standard Equipment..............1 1.3 Safety Information................2
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 EMPIRE SCALE CORPORATION d.b.a. PRECISION SCALE & BALANCE d.b.a. EMPIRE SCALE & BALANCE 140 Rotech Drive Lancaster, NY 14086 Margery
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017. Data Weighing Systems 255 Mittel Drive Wood Dale, IL Steven A. Thomas CALIBRATION
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 Data Weighing Systems 255 Mittel Drive Wood Dale, IL 60191 Steven A. Thomas 800-397-6301 CALIBRATION Valid to: September 22, 2019 Certificate Number: L1114-1
More informationSchedule. 300 mm to 600 mm 600 mm to 1000 mm inch to 12 inch
LABORATORY LOCATION: (PERMANENT LABORATORY) MITUTOYO (M) SDN. BHD. MAH SING INTEGRATED INDUSTRIAL PARK BANDAR PINGGIRAN SUBANG 4, JALAN UTARID U5/14, SECTION U5 40150 SHAH ALAM SELANGOR, MALAYSIA Page:
More informationREQUEST FOR QUOTATION
REQUEST FOR QUOTATION TO, GAIL WEBSITE VENDOR India Vendor Code - 101019938 RFQ No.: GAIL/08/RJ19140/3300025749/ Dated : 23.07.2008 Kind Attn : Mr/Ms Dear Sir/Madam, GAIL (India) Ltd. invites you to submit
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.09.2016 to 08.12.2018 Holder of certificate: k3works
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 FOOD SERVICE TECHNOLOGY CENTER 12949 Alcosta Blvd Suite 101 San Ramon, CA 94583 Richard Swierczyna Phone: 925-866-2844 Email: rswierczyna@fishnick.com MECHANICAL
More informationRev /07/2015 CATALOGUE - CALIBRATION SERVICES 1
Rev. 02 07/07/2015 CATALOGUE - CALIBRATION SERVICES 1 OVER 100 ITEMS We are proud to present to you our new catalogue for 2015. In the following pages we present more than 100 instrument types, which we
More informationUser s Guide WTM Laboratory Grade, Bench Top Mini Wind Tunnel. Shop online at omega.com
TM User s Guide Shop online at omega.com e-mail: info@omega.com For latest product manuals: www.omegamanual.info WTM-1000 Laboratory Grade, Bench Top Mini Wind Tunnel omega.com info@omega.com U.S.A. Headquarters:
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0751 Valid Until Last Amended on
Last Amended on 10.03.2016 Page 1 of 5 I. DIMENSION 1. Vernier caliper $ 0 to 300 mm/0.01 mm ± 12.0 µm Using Caliper Checker 0 to 300 mm/0.02 mm ± 16.1 µm Using Caliper Checker 0 to 600 mm/0.01 mm ± 14.0
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 DEKRA IST RELIABILITY SEVICES INC. No. 22 Puding Rd., East Dist. Hsinchu City 300, Taiwan, R.O.C. Phone: 886 3 579 5766 ext 7100 Mr. General Lee general.lee@dekra-ist.com
More information2271A Industrial Pressure Calibrator Extended specifications
2271A Industrial Pressure Calibrator Extended specifications General Specifications Power Requirements... 100 V ac to 240 V ac, 47 Hz to 63 Hz Fuse... T2A 250 V ac Specifications Max Power Consumption...
More informationHPC600. Handheld Pressure Calibrator. Built-in electric pump. pressure
pressure Handheld Pressure Calibrator HPC600 Pressure ranges HPC600-2A 0 to 2 bara / 30 psia HPC600-2C Vacuum to 2 bar / 30 psi HPC600-10A 0 to 10 bara / 150 psia HPC600-10C Vacuum to 10 bar / 150 psi
More informationRTD CALIBRATOR Mode KM-CAL-720
An IS 9001:2008 Company RTD CALIBRATR Mode KM-CAL-720 SPECIAL FEATURES : Sources and measures 7 RTD types devices (PT10, PT50, PT100, PT200, PT500, PT1000 (385), PT100 (JIS)) or High accuracy maximum up
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
21-47 High Street, Feltham, Middlesex, TW13 4UN, UK Unit 1 Quatro Park Paycocke Road Basildon Essex SS14 3GH Contact: Mr E Martin Tel: +44 (0)1268 290115 Fax: +44 (0)1268 290123 E-Mail: eamonn.martin@mira.co.uk
More information6109A / 7109A. Portable Calibration Baths. Four times more calibration throughput with twice the accuracy of Micro-Baths and dry-block calibrators
6109A / 7109A Portable Calibration Baths Four times more calibration throughput with twice the accuracy of Micro-Baths and dry-block calibrators Portable calibration baths designed for clean process applications
More informationCentral Mechanical Engineering Research Institute, Mahatma Gandhi Avenue, Durgapur, West Bengal
Last Amended on 23.09.2014 Page 1 of 9 I. DIMENSION 1. GAUGE BLOCKS $ 0.5 mm to 25 mm 25 mm to 50 mm 50 mm to 75 mm 75 mm to 100 mm 2. LENGTH BAR $ Upto 300 mm 300 mm to 600 mm 300 mm to 1000 mm 0.11µm
More information9142-B-P-156/AF. User s Guide. Field Metrology Well. Distribution is limited to DoD and U.S. DoD contractors only.
9142-B-P-156/AF Field Metrology Well User s Guide Distribution is limited to DoD and U.S. DoD contractors only. May 2013 2013 Fluke Corporation. All rights reserved. Specifications are subject to change
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY MINNEAPOLIS LLC (A subsidiary of Element Materials Technology Minneapolis Inc.) 9725 Girard Avenue South Minneapolis, MN 55431
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1, 2, 3 CONTINENTAL AUTOMOTIVE SYSTEMS 2400 Executive Hills Blvd. Auburn Hills, MI 48326 Mr. David E. Swift Phone: 248 209 3813 Email: david.swift@continental-corporation.com
More informationISOCAL - 6 Range Europa Venus Calisto
-45 to 250 C ACROSS RAngE ISOCAL - 6 Range Europa Venus Calisto g 35 x 160mm Calibration Volume g The Most Flexible Temperature Calibrator g S model includes Universal Input Temperature Indicator g Windows
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationUNIVERSAL CALIBRATOR M
INTRODUCTION UNIVERSAL CALIBRATOR - 3001M Before going through the instruction manual for actual use of the instrument go through the specifications and take note of the following points carefully 1. No
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTOLIV ASP, INC. Autoliv North America 1320 Pacific Dr. Auburn Hills, MI 48326 Warren Short 248 276 3840 warren.short@autoliv.com MECHANICAL Valid To: April
More informationSpring loaded resistance thermometer
Spring loaded resistance thermometer FOR USE WITH TRANSMITTER HOUSING AND THERMOWELLS PIA CONFIGURATIONS Ex ia RTD Product series PT100WI Table 1: Measuring inserts main model PIA Terminal Spring loaded
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTONEUM NORTH AMERICA, INC Haggerty Rd. Novi, MI Jian Pan Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 29293 Haggerty Rd. Novi, MI 48331 Jian Pan Phone: 248 324 2264 MECHANICAL Valid To: October 31, 2017 Certificate Number: 1745.02
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 480 West 5 th Street Bloomsburg, PA 17815 Justine Danilowicz Phone: 570 316 6078 MECHANICAL Valid To: April 30, 2019 Certificate
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ZF GLOBAL ELECTRONICS- VALIDATION LABORATORY Carl-Spaeter-Str. 8 Koblenz, Germany 56070
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ZF GLOBAL ELECTRONICS- VALIDATION LABORATORY Carl-Spaeter-Str. 8 Koblenz, Germany 56070 Werner Dillbahner, Dipl.-Ing. (FH), (Authorized Representative) Phone:
More informationHellenic Accreditation System. Annex F2/17 to the Certificate No SCOPE of ACCREDITATION
Hellenic Accreditation System Annex F2/17 to the Certificate No. 263-5 SCOPE of ACCREDITATION of the Testing & Calibration Laboratory of LINK LAB LTD for the performance of calibrations Measurand / Spectrophotometric
More informationphotodiodes Description PerkinElmer Optoelectronics offers a broad array of Silicon and InGaAs PIN and APDs.
photodiodes Features Low-cost visible and near-ir photodetector Excellent linearity in output photocurrent over 7 to 9 decades of light intensity Fast response times Available in a wide range of packages
More informationANEMOMETER Vaisala WAA252
ANEMOMETER Vaisala WAA252 SIGNAL OUTPUT ELECTRICAL SUPPLY HEATING SUPPLY MODEL IN EOL MANAGER 0...750 Hz square wave 5...15 VDC 10mA typ. 24 VDC
More information