Certifikat och provningsprotokoll för art. 4512, 4513, 4514 och 4515

Transcription

1 Certifikat och provningsprotokoll för art. 4512, 4513, 4514 och 4515 Innehållsförteckning: Declaration of conformity... sid 2 SINTEF Produktdokumentation... sid 3 Efectis Nederland BV Brandtestunderlag... sid 7 Efectis Nederland BV Testrapport...sid 22 NEMKO Rapport av Sveriges Provnings- och forskningsinstituts tester av ljudisolering i gipsvägg med olika dosor...sid 25 ELKO AB E-post: info@elko.se Hemsida: VAT/Org.nr: SE Huvudkontor Bryggvägen 16 Box Stockholm Tele Tel: +46 (0) Fax: +46 (0)

2

3

4

5

6

7 Efectis Nederland BV Return address: P.O. Box 1090, 2280 CB Rijswijk, The Netherlands Environmental Seals Ltd Envirograf House Attn: Mr. P. Ackerman-Mond Barfrestone DOVER Kent CT15 7JG UNITED KINGDOM Efectis Nederland BV Centre for Fire Safety Lange Kleiweg 5 P.O. Box CB Rijswijk T F Subject Preliminary test of Norwegian Elko sockets and Envirograf, product type 30 in a partition wall Efectis Nederland 1 report Dear Mr Ackerman-Mond, On behalf of your firm we have performed a preliminary test on a unloaded partition wall provided with several sockets. The test is based on the European standard EN :1999 and performed on January 23, The partition wall is as in practice provided with Norwegian Elko sockets and switches fitted with intumescent gaskets of Envirograf, product type 30, which expand during a fire. For this test a partition wall was prepared with Fire Line Plasterboard and only two sockets on each side. The construction is assembled at our laboratory on January 22, This report is issued by the TNO company Efectis Nederland BV (previously TNO Centre for Fire Research). TNO decided, in response to international developments and requests by customers, to collaborate with two European Egolf partners, both highly experienced in fire safety: the Norwegian Sintef/NBL and the French CTICM. Thus, through scaling up, a more comprehensive service of high quality and a wider range of facilities can be offered. In order to achieve this, the fire safety related activities of the partners involved have been privatised in this collaboration. With respect to TNO this has lead to the privatisation on the 1 st of July of the activities of the TNO Centre for Fire Research via the establishment of the company Efectis Nederland BV. Date arjo.lock@efectis.com Direct dialling (015) Direct fax (015) Project number Efectis Nederland BV: a TNO Company The Standard Conditions for Research Instructions given to Efectis, as filed at he Registry of the District Court and the Chamber of Commerce in The Hague shall apply to all instructions given to TNO; the Standard Conditions will be sent on request.

8 Date Construction details: The construction consisted of a frame with wooden studs, dimensions 100 x 50 mm with a spacing of 475 mm in the middle and 240 mm near the edges, fixed together with 100 mm screws no. 8 (see figure 1). Two layers of Fire Line Plasterboards, thickness 2 x 15 mm, on both sides, secured with galvanised clout nails, dimensions 50 x 3 mm. The construction was applied with two vertical joints at 240 mm from the edges. The dimensions of the total construction were 1450 x 1440 x 140 mm (see figure 2). 2/15 For the wall construction the following type of Norwegian Elko fitting materials were submitted: S57/100 stender hoy ring Code No 4040 S57/100 stender Code No 3012 S57/ stender Code No 4045 S57/Dobbel 4 loop stender Code No 3011 All models were provided with gaskets of Envirograf, type 30 at the bottom of the socket see photo 4. Selection of socket models From this series, two models were chosen which should present the complete series of this type of sockets. This were model S57/100 stender hoy ring and S57/Dobbel 4 loop stender The model S57/100 stender is almost the same as the S57/100 stender hoy ring with the difference that the last one is a higher model due to an extra ring to create more volume. The gasket in both models has the same surface and thickness (45 x 45 x 2.5 mm). The model S57/Dobbel 4 loop stender and the S57/ stender are both wider models with respectively 2 gaskets (45 x 45 x 2.5 mm) and 1 gasket (45 x 60 x 2.5 mm). The capacity/surface ratio of the tested models is more unfavourable than the not tested models (worse case models), see also additional letter report 2008-Efectis- R0???. At each side of the wall construction two sockets of each model where situated. The sockets were mounted onto the wooden studs and covered with the Fire Line Plasterboards. At the position of the socket a hole was drilled which was only covered with the armature cover (name???), see photo 7. Fire test: The construction was placed in front of our preliminary furnace which was equipped with three temperature sensors and a pressure device. The partition wall was applied with ten surface thermocouples at the positions showed in figure C1. The construction fulfilled the criteria for integrity and thermal insulation during the complete 90 minutes of the test.

9 The thermal insulation limits were not exceeded, all the surface temperatures stayed below 100 C. Observations during the fire test N= Non-fire side Date 3/15 Time Side Observation [min] 0 Start heating 5 N Fluctuations in furnace pressure 22 N Smoke coming from the top side of the specimen 30 N More smoke coming from the specimen 45 N Moisture visible coming out of socket B 60 N Photo of specimen after 60 minutes 63 N More moisture coming out of socket B 90 N Photo of specimen after 90 minutes 92 End of heating Assessment: A partition wall constructed of timber and covered with two layers of plasterboard and provided with Norwegian Elko sockets and switches from the tested range will have a fire resistance according to NEN 6069: 2005 of at least 90 minutes under the conditions: the timber frame has the same dimensions; Fire Line Plasterboard is used, with two layers of 15 mm at each side; the fitting materials are used mentioned in this letter report; the sockets are provided with Envirograf product 30, intumescent gaskets. At the next pages the drawings, the graphs of the test results and some photographs made during the assembly and the fire test are enclosed. Yours faithfully, A.J. Lock Dr. Ir. G. van den Berg This document has the status of a Efectis Nederland report and is known at Efectis as Efectis Nederland.-report no CVB- R0106. No part of this publication may be reproduced and/or published by print, photoprint, microfilm or any other means without the previous written consent of Efectis. In case this report was drafted on instructions, the rights and obligations of contracting parties are subject to either the Standard Conditions for Research Instructions given to TNO, or the relevant agreement concluded between the contracting parties. Submitting the report for inspection to parties who have a direct interest is permitted.

10 Date Sponsor: Environmental Seals Ltd. Project number: /15 Figure 1

11 Sponsor: Environmental Seals Ltd. Project number: Date 5/15 Figure 2

12 Sponsor: Environmental Seals Ltd. Project number: Furnace conditions Centre for Fire Safety Date: 23/01/2007 Furnace temperatures Date 6/15 Project : Wall sockets and switches Projectnbr : ISOmax ISOmin TPL1 TPL2 TPL3 Temperature [ C] ===> Time [min] ===> Graph : B1 Centre for Fire Safety Date: 23/01/2007 Deviation of the fire curve Project : Wall sockets and switches Projectnbr : ISO+ ISOdev_ISO Deviation fire curve [%] ===> Time [min] ===> Graph : B2

13 Sponsor: Environmental Seals Ltd. Project number: Centre for Fire Safety Date: 23/01/2007 Overpressure in the furnace Date 7/15 Project : Wall sockets and switches Projectnbr : Overpressure [Pa] ===> Time [min] ===> Graph : B3 Figure C1: Positions of thermocouples

14 Date Sponsor: Environmental Seals Ltd. Project number: Graphs of test results Centre for Fire Safety Date: 23/01/2007 Surfacetemperatures of the wall (part 1) 8/15 Project : Wall sockets and switches Projectnbr : Temperature [ C] ===> TC1 TC2 TC3 TC4 TC Time [min] ===> Graph : C2 Centre for Fire Safety Date: 23/01/2007 Surfacetemperatures of the wall (part 2) Project : Wall sockets and switches Projectnbr : Temperature [ C] ===> TC6 TC7 TC8 TC9 TC10 TC11 TC Time [min] ===> Graph : C3

15 Sponsor: Environmental Seals Ltd. Project number: Centre for Fire Safety Date: 23/01/2007 Ambienttemperature Date 9/15 Project : Wall sockets and switches Projectnbr : Temperature [ C] ===> Time [min] ===> Graph : C4

16 Sponsor: Environmental Seals Ltd. Project number: Photos Date 10/15 Photo 1: Assembly of sockets against wooden studs. Photo 2: Both models at fire and non-fire side.

17 Date 11/15 Photo 3: Model S57/100 stender hoy ring Photo 4: Model S57/Dobbel 4 loop stender.

18 Sponsor: Environmental Seals Ltd. Project number: Date 12/15 Photo 5: Specimen in front of furnace. Photo 6: Specimen after 60 minutes.

19 Sponsor: Environmental Seals Ltd. Project number: Date 13/15 Photo 7: Detail of socket A during test, after 60 minutes. Photo 8: Detail of socket B during test, after 60 minutes.

20 Sponsor: Environmental Seals Ltd. Project number: Date 14/15 Photo 9: Specimen after 90 minutes. Photo10: Fire side of specimen after the test.

21 Sponsor: Environmental Seals Ltd. Project number: Date 15/15 Photo 11: Detail of completely filled hole of socket A after the test. Photo 12: Detail of completely filled hole of socket B after the test.

22 Efectis Nederland BV Return address: P.O. Box 1090, 2280 CB Rijswijk, The Netherlands Environmental Seals Ltd Envirograf House Attn: Mr. D.A. Ward Barfrestone DOVER Kent CT15 7JG United Kingdom Subject Additional letter report for, product type 30 of Envirograf Efectis Nederland report R0??? 1 Dear Mr Ward, On behalf of your firm we have performed a preliminary test on an unloaded partition wall provided with two socket models as described in test report R0106/LKA/TNL. The test is based on the European standard EN :1999 and assessed according to the Dutch standard NEN 6069: To achieve information about the fire resistance aspects of the complete range of this product two models of this type of sockets were chosen and tested on January 23, The partition wall construction as described below was provided with the two models, one of each at the fire side and also at the non-fire side. 1 1 This report is issued by the TNO company Efectis Nederland BV (previously TNO Centre for Fire Research). Centre for Fire Safety Lange Kleiweg 5 P.O. Box CB Rijswijk T F Date February 26, Efectis-R0???/LKA arjo.lock@efectis.com Direct dialling (015) Direct fax (015) Project number /2008??? Efectis Nederland BV: a TNO Company The Standard Conditions for Research Instructions given to Efectis, as filed at he Registry of the District Court and the Chamber of Commerce in The Hague shall apply to all instructions given to TNO; the Standard Conditions will be sent on request. TNO decided, in response to international developments and requests by customers, to collaborate with two European Egolf partners, both highly experienced in fire safety: the Norwegian Sintef/NBL and the French CTICM. Thus, through scaling up, a more comprehensive service of high quality and a wider range of facilities can be offered. In order to achieve this, the fire safety related activities of the partners involved have been privatised in this collaboration. With respect to TNO this has lead to the privatisation on the 1 st of July 2006 of the activities of the TNO Centre for Fire Research via the establishment of the company Efectis Nederland BV.

23 Date Construction details of partition wall The wall construction consisted of a frame with wooden studs, dimensions 100 x 50 mm with a spacing of 475 mm in the middle and 240 mm near the edges, fixed together with 100 mm screws no. 8. Two layers of Fire Line Plasterboards, thickness 2 x 15 mm, on both sides, secured with galvanised clout nails, dimensions 50 x 3 mm. The construction was applied with two vertical joints at 240 mm from the edges. The dimensions of the total construction was 1450 x 1440 x 140 mm (see also the mentioned preliminary letter report) Efectis-R0???/LKA 2/2 Construction details of sockets and gaskets: All the sockets were provided with the same type of gasket. The models are used with one or with two gaskets with the following dimensions: 45 x 45 mm and 45 x 60 mm. The at the front side red coloured gasket were glued to the bottom of the socket and had a thickness of approx. 2.5 mm. The capacity of the socket models (without adapter) and the surface of the gaskets are determined and are shown in the table below. Table: 1 Norwegian socket models with Envirograf gaskets product 30 Model Code Socket surface Ratio capacity in [cm 3 ] [cm 2 ] S57/100 stender hoy ring No S57/100 stender No S57/ stender No S57/Dobbel 4 loop stender No Capacity/surface relation The determined capacity of the sockets and the surface of the gaskets show that the increase of the socket capacity is less than the surface increase of the used gasket (ratio). With thes mentioned amount of material each model of this type of sockets should be filled completely in case of a fire. Aim of the test The aim of the test set-up was to check two aspects. The sockets mounted at the nonfire and at the fire side in the mentioned type of wall and the influence of the different gaskets in the sockets. The constructions fulfill the requirements during this test.

24 Date Additional assessment * : The models of the complete range of above described Norwegian Elko fitting materials implemented in a partition wall constructed of timber and covered with two layers of plasterboard will have a fire resistance according to NEN 6069: 2005 of at least 90 minutes under the conditions: 2008-Efectis-R0???/LKA 3/3 the timber frame has the same dimensions; Fire Line Plasterboard is used, with two layers of 15 mm at each side; the fitting materials are used from this range of products; the sockets are enclosed with Envirograf product 30, intumescent gaskets with a sufficient amount of material to fill the sockets. Remark: * The construction is assessed according to the Dutch standard because only a preliminary test is performed and not a full scale test according to EN The Dutch Standard is similar with the European standard. Since 2005 the Dutch Standard refers for this type of constructions to the European standard EN Yours faithfully, A.J. Lock Dr. Ir. G. van den Berg Centre for Fire Safety This document has the status of a Efectis Nederland report and is known at Efectis as Efectis-report no Efectis-R0???. No part of this publication may be reproduced and/or published by print, photoprint, microfilm or any other means without the previous written consent of Efectis In case this report was drafted on instructions, the rights and obligations of contracting parties are subject to either the Standard Conditions for Research Instructions given to TNO, or the relevant agreement concluded between the contracting parties. Submitting the report for inspection to parties who have a direct interest is permitted.

25

26

27

28