ANTIFRICTION BEARINGS

Transcription

1 CORPORATE MATERIAL PRIMARY CATEGORY : 7 PART : 3 ANTIFRICTION BEARINGS (SUB GROUP : 721) REVISION 02 FEBRUARY 2002 COMPILED & BY CENTRAL STANDARDS DEPARTMENT CORPORATE RESEARCH & DEVELOPMENT DIVISION BHARAT HEAVY ELECTRICALS LIMITED VIKASNAGAR, HYDERABAD

2 CORPORATE MATERIAL COMPOSITION OF THE WORKING GROUP FOR CODIFICATION OF BEARINGS SRI SUDHIR KUMAR CONVENOR HEEP, HARDWAR COPYRIGHT AND CONFIDENTIAL The Information on this document is the property of BHARAT HEAVY ELECTRICALS LIMITED It must not be used directly or Indirectly in any way detrimental to the Interest of the company. Members: Unit: 1. Sri. A.L. PATEL BHOPAL 2. Sri. V.K.MISHRA BHOPAL 3. Sri. B.N.NAIK HYDERABAD 4. Sri. V.V.RAO HYDERABAD 5. Sri. P. V.RAJAN HPBP, TRICHY 6. Sri. S.MARIASOOSAI LASR HPBP, TRICHY 7. Sri. ATUL SAXENA HEEP, HARDWAR 8. Sri. KISHANLAL HEEP, HARDWAR 9. Sri. GIRISHRAJ JHANSI 10. Sri. N.KRISHNAMURTHY Corp. R&D 11. Sri. P.RATNASWAMY Corp. R&D Catalogue Complied and Issued by CENTRAL STANDARDS DEPARTMENT CORPORATE RESEARCH & DEVELOPMENT DIVISION BHARAT HEAVY ELECTRICALS LIMITED VIKASNAGAR, HYDERABAD Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC

3 CORPORATE MATERIAL CONTENTS COPYRIGHT AND CONFIDENTIAL The Information on this document is the property of BHARAT HEAVY ELECTRICALS LIMITED It must not be used directly or Indirectly in any way detrimental to the Interest of the company. SL.NO. DESCRIPTION PAGE NO. 1. GUIDELINES A ABBREVIATED DESCRIPTIONS A CODING STRUCTURE FOR BEARINGS A 7 4. CODING STRUCTURE FOR ACCESSORIES A 8 5. DETAILS OF CODIFICATION: 5.1 Bearings - Main Types A Accessories - Main Types A Bearings - Sub - classification A Accessories - Sub - classification A CORPORATE CODE NUMBERS B Date : FEBRUARY 2002 WG - BARINGS INTERP ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 1

4 CORPORATE MATERIAL GUIDELINES FOR CODIFICATION OF ANTIFRICTION BEARINGS AT CORPORATE LEVEL The following guidelines formulated and recommended by the Working Group for Codification of Antifriction Bearings have been approved by the IPSC. This Code Catalogue has been worked out on this basis. 1. Corporate Code Numbers for Antifriction bearings shall be allotted under the main group 721. This group covers ball and roller bearings and also other types of bearings covered by specific standard series of reputed manufacturers. 2. Bearings used by more than one Division will be codified at the Corporate level irrespective of its value or number. The reserve code numbers for standard sizes which are prefixed could be allotted by the units with prefix AA. The units shall inform central standards Department of Corp. R&D, Hyderabad and other members of the Working Group (Bearings) about such allotments for recording in the master Code Catalogue. 3. Coding structure has been developed to identify each bearing on the basis of its boundary dimensions only and not taking into consideration variations in the design of bearing of different manufactures. 4. The code structure will cover all bearings used for production as well as for maintenance. Accessories of bearings like balls, rollers, adapter sleeves, withdrawal sleeves, etc. are also codified. 5. Metric bearings only are codified at corporate level. However, provision has been made in the coding Structure for inch bearings to facilitate plant level operation. 6. Corporate level size cods for metric bearings shall be operated from 01 to 80 and plant cods from 99 to 81 in descending order. 7. The code scheme shall cover normal clearance and zero precision bearings in a significant manner. Other grades and precision bearings are to be covered sequentially at the plant level only. 8. In addition to the codification of basic bearings, the structure also provides for combination of bearings and its accessories, such as lock nuts, locking washers, etc. 9. Normally Corporate code numbers with prefix AA only will be allotted. In the case of imported items, plants will take care of the prefixes suitably. Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 2

5 CORPORATE MATERIAL 10. Codification of the following tapered roller bearing in inch sizes is left to the individual plants as and when the sizes are required to be codified. This approval has been adopted due to the immensity by of the sizes of tapered roller bearings in inch sizes. a) to Single row tapered roller bearings. b) to Double row tapered roller bearings. c) to Four row tapered roller bearings. d) to Tapered roller thrust bearings. 11. Any bearing for which code number is existing either in the Corporate Material Code Catalogue or pre-coded numbering catalogue, can be directly allotted the corporate. code number against AA series by the 'User plants' and the same shall be intimated to Central Standards Department of Corporate R&D for registration of such codes in the master code catalogue. 12. The code catalogue enlists the reference of only one manufacturer or equivalent against each code. For equivalent of other manufacturers, please refer ' Equivalent Tables' issued separately. This is done merely to afford use of the existing format. 13. ISO designations, wherever applicable, shall be indicated. 14. Wherever possible two or three sub-classifications of bearing shall be accommodated under one major classification to ensure better utilization of the scheme. Eg.: AA to AA covers Single Row Needle And Single Thrust Ball Bearings and AA onwards covers Double Row Needle And Single Thrust Ball Bearings. 15. Barred numbers of the check digit will also be used for code check digits. However, while operating the code numbers, the plants will take care of the correctness of the code numbers, since the computer will not point out the errors for the codes ending with barred check digits. These barred numbers shall be indicated with an asterisk mark(*) in the code catalogue. 16. The Corporate Code Catalogue shall have restricted circulation and distribution shall be controlled by the Standards Departments of the respective Divisions. 17. The unit of issue to be entered in the catalogue shall be numbers. 18. Unless otherwise amended or revoked by IPSC, the above guidelines shall hold good for codification of Antifriction Bearings in future also. Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 3

6 CORPORATE MATERIAL ABBREVIATED DSCRIPTIONS LIST OF ABEREVIATIONS A N A - Angular N - Needle ADJ - Adjustable NUT - Nut ADP - Adapter P ASSY - Assembly PD -Pad B PLM - Plummer B - Bearing PLN - Plain BL - Ball R BLOC - Block RG - Ring C RL - Roller C - Contact S CAGE - Cage S - A - Self-Aligning COLR - Collar SH - Shell COMB - Combination SL - Seal CRCLP - Circlip SLG - Sealing CY - Cylindrical SLV - Sleeve D SNP - Snap D/R - Double Row SPH - Spherical D/THR - Double Thrust S/R - Single Row F S/THR - Single Thrust FLX - Flexible T F/R -Four Row THR - Thrust I TP - Tapered IR - Inner Ring W L WDL - Withdrawal LG - Long W/O - Without LK - Lock WSHR - Washer LKG - Locking Date : FEBRUARY 2002 MARCH, 1978 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 4

7 CORPORATE MATERIAL CORPORATE CODE - WISE ABBREVIATED DESCRIPTIONS CODE REFERENCE ABBREVIATION AA S/R BL B AA D/ R BL B AA S / R S-A BL B AA D / R S-A BL B AA D / R S-A BL B-COMB AA S / R A C BL B AA D / R A C BL B AA S/ R CY RL B AA D / R CY RL B AA F / R CY RL B AA CY RL B-LG RL AA S / R S-A RL B AA D / R S-A RL B AA S / R N RL B W/ O IR AA D/ R N RL B W/O IR AA S / R N RL B- IR AA D / R N RL B -IR / SH AA ADJ N RL B AA S-A N RL B AA N RL THR BL B AA N RL THR RL B AA N RL D/ THR B AA CY RL S/THR B AA CY RL D/ THR B AA S/R FLX RL B AA D / R FLX RL B AA S / R TP RL B AA D / R TP RL B Date : FEBRUARY 2002 MARCH, 1978 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 5

8 CORPORATE MATERIAL CODE REFERENCE ABBREVIATION AA F/R TP RL B AA TP RL THR B AA S / THR BL B AA D / THR BL B AA THR BL B(A C) AA S / THR BL B(S-A) AA D / THR BL B(S-A) AA SPH RL THR B AA SPH PLN B AA PD / COLR AA SL / SLG RG- BL/RL B AA CRCLP / SNP RG AA SL-N B AA N CAGE AA PLM BLOC AA LK NUT/WDL NUT AA LKG WSHR AA WDL SLV AA ADP SLV ASSY AA N RL AA CY RL AA BL Note: Since the abbreviated description up to the size is required to be contained within 30 characters, the above abbreviations cover only the major parameters of bearings and do not generally include other design details as to end shields, lubricant holes, combinations of accessories, etc. Date : FEBRUARY 2002 MARCH, 1978 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 6

9 CORPORATE MATERIAL CODING STRUCTURE ANTIFRICTION BEARINGS AA 721 XX XX XX X CHECK DIGIT SIZE CODE SUBCLASSIFICATION TYPE BEARINGS ALPHABETICAL CORPORATE / PLANT CODE ( 'AA' FOR CORPORATE LEVEL) Date : FEBRUARY 2002 MARCH, 1978 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 7

10 CORPORATE MATERIAL CODING STRUCTURE ACCESSORIES FOR BEARINGS AA 721 XX XX XX X CHECK DIGIT SIZE CODE SUB-CLASSIFICATION PARTS OF E\BEARINGS BEARINGS ALPHABETICAL CORPORATE / PLANT CODE ( 'AA' FOR CORPORATE LEVEL) Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 8

11 CORPORATE MATERIAL DETAILS OF CODIFICATION, BEARINGS - MAIN TYPES AA 721 XX - ANTIFRICTION BEARINGS DETAILS OF 6TH & 7TH DIGITS - TYPE OF BEARING AA 721 XX - TYPE OF BEARING 01 - SINGLE ROW RIGID RADIAL (DEEP GROOVE) BALL BEARINGS 02 - DOUBLE ROW RIGID RADIAL (DEEP GROOVE) BALL BARINGS SINGLE ROW SELF ALIGNING (RADIAL BALL BEARINGS 07 - DOUBLE ROW SELF ALIGNING (RADIAL ) BALL BEARINGS 08 - DOUBLE ROW SELF ALIGNING (RADIAL) BALL BEARINGS WITH COMBINATIONS SINGLE ROW ANGULAR CONTACT (RADIAL) BALL BEARINGS 12 - DOUBLE ROW ANGULAR CONTACT( RADIAL) BALL BEARINGS SINGLE ROW CYLINDRICAL (RADIAL) ROLLR BEARINGS 16 - DOUBLE ROW CYLINDRICAL (RADIAL) ROLLER BEARINGS 17 - FOUR ROW CYLINDRICAL (RADIAL) ROLLER BEARINGS 18 - CYLINDRICAL ROLLER BEARINGS WITH LONG ROLLERS SINGLE ROW SELF-ALIGNING (SPHERICAL) RADIAL ROLLER BEARINGS 23 - DOUBLE ROW SELF - ALIGNING (SPHERICAL) RADIAL ROLLER BEARINGS Date : FEBRUARY 2002 MARTCH 1978 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 9

12 CORPORATE MATERIAL AA 721 XX - TYPE OF BEARING SINGLE ROW RIGID RADIAL NEEDLE ROLLER BEARINGS (WITHOUT INNER RING) 28 - DOUBLE ROW RIGID RADIAL NEEDLE ROLLER BEARINGS (WITHOUT INNER RING) 29 - SINGLE ROW RIGID RADIAL NEEDLE ROLLER BEARINGS (COMPLETE WITH INNER RINGS) 30 - DOUBLE ROW RIGID RADIAL NEEDLE ROLLER BEARINGS (COMPLETE WITH INNER RINGS) / DOUBLE ROW SHELL TYPE NEEDLE ROLLER BEARINGS 31 - ADJUSTABLE NEEDLE ROLLER BEARINGS 32 - SELF ALIGNING NEEDLE ROLLER BEARINGS 33 - COMBINED RADIAL NEEDLE ROLLER AND THRUST BALL BEARINGS 34 - COMBINED RADIAL NEEDLE ROLLER AND THRUST ROLLER BEARINGS NEEDLE ROLLER DOUBLE THRUST BEARINGS CYLINDRICAL ROLLER SINGLE THRUST BEARINGS 41 - CYLINDRICAL ROLLER DOUBLE THRUST BEARINGS SINGLE ROW FLEXIBLE ROLLER BEARINGS 46 - DOUBLE ROW FLEXIBLE ROLLER BEARINGS SINGLE ROW TAPERED ROLLER BEARINGS 50 - DOUBLE ROW TAPERED ROLLER BEARINGS Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 10

13 CORPORATE MATERIAL AA 721 XX - TYPE OF BEARING 51 - FOUR ROW TAPERED ROLLER BEARINGS 52 - TAPERED ROLLER THRUST BEARINGS SINGLE THRUST BALL BEARINGS 56 - DOUBLE THRUST BALL BEARINGS 57 - THRUST BALL BEARINGS - ANGULAR CONTACT 58 - SINGLE THRUST BALL BEARINGS - SEELF ALIGNING 59 - DOUBLE THRUST BALL BEARINGS - SELF ALIGNING SPHERICAL ROLLER THRUST BEARINGS - SELF ALIGNING 65 - to - RESERVE SPHERICA PLAIN BEARINGS 81 - to - ACCESSORIES FOR BEARINGS 99 - Date : FEBRUARY 2002 WG- BEARINGS ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 11

14 CORPORATE MATERIAL AA 721 XX - DETAILS OF CODIFICATION, ACCESSORIES - MAIN TYPES 99 - BALLS 98 - CYLINDRYCAL ROLLERS 97 - NEEDLE ROLLERS 96 - ADAPTER SLEEVE ASSEMBLIES 95 - WITHDRAWAL SLEEVES 94 - LOCKING WASHRS 93 - LOCK ( SHAFT) NUTS & WITHDRAWAL NUTS 92 - PLUMMER BLOCKS 91 - NEEDL CAGES 90 - SEALS AND SEALING RINGS FOR NEEDL BEARINGS 89 - CIRCLIPS AND SNAP RINGS FOR NEEDLE BEARINGS 88 - SEALS AND SEALING RINGS FOR BALL AND ROLLER BEARINGS 87 - PADS & COLLARS Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 12

15 CORPORATE MATERIAL DETAILS OF CODIFICATION BEARINGS - SUB - CLASSIFICATION AA XX - SINGLE ROW RIGID RADIAL (DEEP GROOVE) BALL BEARINGS AA XX DESCRIPTION ISO NO 01 - RIV: EPM AND EEPM SERIES: HIGH BH 10 & BH 18 SPEED SERIES 02 - SKF : SERIES: NON-STANDARD BC 19 SERIES 03 - SKF : SERIES: NON-STANDARD SERIES 04 - GPZ: ; EXTRA LIGHT NARROW BC 00 SERIES AND SKF: SERIES: EXTRA LIGHT SERIES: 05 - SKF: 600 SERIES; 600/- AND SERIES BC SKF: 600 Z SERIES: WITH ONE END SHIELD 07 - SKF: 600 ZZ SERIES: WITH TWO END SHIELDS 08 - SKF: 6000 SERIES BC SKF: 6000 Z SERIES: WITH ONE END SHILD BC 10 P 10 - SKF: 6000 ZZ SERIES: WITH TWO END SHILDS BC 10 PP 11 - SKF: 6000 N SERIES: WITH SNAP RING GROOVEBC 10 N 12 - SKF: 6000 NR SERIES : WITH SNAP RING GROOVE AND SNAP RING BC 10 G 13 - SKF: 6000 RS SERIES: WITH ONE RUBBER SEAL BC 10 E 14 - SKF: 6000 RRS SERIES: WITH TWO RUBBER SEALS BC 10 EE 15 - SKF: 6000 ZN SERIES - WITH ONE END SHIELD BC 10 PN AND SNAP RING Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 13

16 CORPORATE MATERIAL AA XX DESCRIPTION ISO NO 16 - SKF: 6000 ZNR SERIES: WITH ONE END SHIELD, SNAP RING GROOVE AND SNAP RING BC 10 PG 17 - SKF: 6000 RSN SERIES : WITH ONE RUBBER BC 10 EN SEAL AND SNAP RING GROOVE 18 - SKF : 6000 RSNR SERIES : WITH ONE RUBBER SEAL, SNAP RING GROOVE AND SNAP RING BC 10 EG 19 - SKF : 6000 ZZN SERIES: WITH TWO END SHIELDS, SNAP RING GROOVE BC 10 PPN 20 - SKF : 6000 ZZNR SERIES: WITH TWO END SHI- ELDS, SNAP RING GROOVE AND SNAP RING BC 10 PPG 21 - SKF: 6000 K SERIES: WITH TAPRED BORE BC 10 K 22 - GPZ: SERIES: WITH TWO RUBBER SEALS BC 30 EE 23 - SKF: 6200 SERIES: STANDARD BC SKF: 6200 Z SERIES: WITH ONE END SHIELD BC 02 P 25 - SKF: 6200 ZZ SERIES. WITH TWO END SHIELDS BC 02 PP 26 - SKF: 6200 N SERIES: WITH SNAP RING GROOVE BC 02N 27 - SKF: 6200 NR SERIES: WITH SNAP RING GROOVE AND SNAP RING BC 02 G 28 - SKF: 6200 RS SERIES: WITH ONE RUBBER SEAL BC 02 E 29 - SKF: 6200 RRS SERIES: WITH TWO RUBBER SEALS BC 02 EE 30 - SKF: 6200 ZN SERIES: WITH ONE END SHIELD AND SNAP RING GROOVE BC 02 PN 31 - SKF: 6200 ZNR SERIES: WITH ONE END SHIELD, SNAP RING GROOVE AND SNAP RING BC 02 PG 32 - SKF: 6200: RSN SERIES: WITH ONE RUBBER SEAL AND SNAP RING GROOVE BC 02 EN 33 - SKF: 6200 RSNR SERIES: WITH ONE RUBBER SEAL AND SNAP RING GROOVE AND SNAP RING BC 02 EG 34 - SKF: 6200 ZZN SERIES: WITH TWO END SHIELDS AND SNAP RING GROOVE BC 02 PPN 35 - SKF: 6200 ZZNR SERIES: WITH TWO END SHI- ELDS, SNAP RING GROOVE AND SNAP RING BC 02 PPG 36 - SKF: 6200 K SERIES: WITH TAPERED BORENG BC 02 K Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 14

17 CORPORATE MATERIAL AA XX DESCRIPTION ISO NO LIGHT WIDE SERIES: 37 - RIV: APN: HIGH SPEED SERIES BH GPZ: SERIES: WITH ONE RUBBER SEAL BC 22 E 39 - GPZ: SERIES: WITH TWO RUBBER BC 22 EE SEALS 40 - GPZ: SERIES: WITH FELT SEAL MEDIUM SERIES 43 - SKF: 6300 SERIES BC SKF: 6300 SERIES: WITH ONE END SHIELD BC 03 P 45 - SKF: 6300 ZZ SERIES: WITH TWO END SHIELDS BC 03 PP 46 - SKF: 6300 N SERIES: WITH SNAP RING GROOVE BC 03 N 47 - SKF: 6300 NR SERIES: WITH SNAP RING GROOVE AND SNAP RING BC 03 G 48 - SKF: 6300 RS SERIES: WITH ONE RUBBER SEAL BC 03 E 49 - SKF: 6300 RRS SERIES: WITH TWO RUBBER SEALS BC 03 EE 50 - SKF: 6300 ZN SERIES: WITH ONE END SHEILD AND SNAP RING GROOVE BC 03 PN 51 - SKF: 6300 ZNR SERIES: WITH ONE END SHIELD, SNAP RING GROOVE AND SNAP RING BC 03 PG 52 - SKF: 6300 RSN SERIES: WITH ONE RUBBER SEAL & SNAP RING GROOVE BC 03 EN 53 - SKF: 6300 RSNR SERIES: WITH ONE RUBBER SEAL, SNAP RING GROOVE AND SNAP RING BC 03 EG 54 - SKF: 6300 ZZN SERIES: WITH TWO END SHI- ELDS AND SNAP RING GROOVE BC 03 PPN 55 - SKF: 6300 ZZNR SERIES: WITH TWO END SHI- ELDS, SNAP RING GROOVE AND SNAP RING BC 03 PPG 56 - SKF: 6300 K SERIES: WITH TAPERED BORE BC 03 K 57 - RIV: BPM: HIGH SPEED SERIES BH 03 Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 15

18 CORPORATE MATERIAL AA XX DESCRIPTION ISO NO MEDIUM WIDE SERIES: 58 - RIV: BL SERIES: WITH TWO RUBBER SEALS BC 23 EE HEAVY SERIES: 61 - SKF: 6400 SERIES: STANDARD BC SKF: 6400 N SERIES: WITH SNAP BC 04 N 63 - SKF: 6400 NR SERIES : WITH SNAP RING GRO- OVE AND SNAP RING BC 04 G 64 - SKF: 6400 K SERIES: WITH TAPERED BORE BC 04 K x to x RESERVED FOR INCH SRIES 99 x Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 16

19 CORPORATE MATERIAL AA XX DESCRIPTION ISO NO Date : FEBRUARY 2002 INCH SERIES 99 - SKF: EE SERIES EXTRA LIGHT SERIES 98 - NBC: XLS SERIES: EXTRA LIGHT WIDE SERIES LIGHT SERIES 97 - SKF: RLS SERIES: 96 - SKF: RLSK SERIES: WITH TAPERED BORE 95 - SKF: RLSZ SERIES: WITH ONE END SHIELD 94 - SKF: RLSZZ SERIES: WITH TWO END SHIELDS 93 - SKF: RLSNR SERIES: WITH SNAP RING GROOVE AND SNAP RING 92 - SKF: RLSZNR SERIES: WITH ONE ENDSHIELD, SNAP RING GROOVE AND SNAP RING 91 - RHP: LJN SERIES: WITH SNAP RING GROOVE 90 - MEDIUM SERIES 89 - SKF:RMS SERIES: 88 - SKF: RMSK SERIES; WITH TAPERED BORE 87 - SKF: RMSZ SERIES: WITH ONE END SHIELD 86 - SKF: RMSZZ SERIES: WITH TWO END SHIELDS 85 - SKFP RMSNR SRIES: WITH SNAP RING 84 - SKF: RMSZNR SRIES: WITH ONE END SHIELD AND SNAP RING 83 - HOFF: MSN SERIES: WITH SNAP RING GROOVE ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 17

20 CORPORATE MATERIAL AA XX - DOUBLE ROW RIGID RADIAL (DEEP GROOVE) BALL BEARINGS AA XX DESCRIPTION ISO NO LIGHT SERIES 01 - SKF: 4200 SERIES: BK MEDIUM SERIES 06 - SKF: 4300 SERIES: BK HEAVY SRIES 11 - R&M : HDJ SERIES to - RESERVE to - RESERVED FOR INCH SERIES 99 - Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A -18

21 CORPORATE MATERIAL AA XX - SINGLE ROW SELF ALIGNING (RADIAL) BALL BEARINGS AA XX DESCRIPTION ISO NO LIGHT SERIES 01 - R&M : SLJ SERIES: WITHOUT SPHERICAL BCA 02 SEATING RING 02 - R&M: SLJS SERIES: WITH SPHERICAL SEATING RING MEDIUM SERIES 06 - R&M : SMJ SERIES: WITHOUT SPHERICAL SEATING RING 07 - R&M : SMJS SERIES: WITH SPHERICAL SEATING RING 08 - to - RESERVE to - RESERVED FOR INCH SERIES 99 INCH SERIES: LIGHT SERIES: 99 - R&M: SLJ SERIES: WITHOUT SPHERICAL SEATING RING 98 - R&M : SLJS SERIES: WITH SPHERICAL SEATING RING 97 - R&M: SLJH SERIES: WITH HOUSING MEDIUM SERIES 93 - R&M: SMJS SERIES: WITHOUT SPHERICAL SEATING RING 92 - R&M: SMJS SERIES: WITH SPHERICAL SEATING RING 91 - R&M: SMJH SERIES: WITH HOUSING 90 - to - RESERVE 71 - Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 19

22 CORPORATE MATERIAL AA XX - SINGLE ROW SELF ALIGNING (RADIAL) BALL BEARINGS AA XX DESCRIPTION ISO NO EXTRA LIGHT SERIES 01 - SKF:100 SERIES:(OLD SKF: SERIES) BS 10 LIGHT SERIES 02 - SKF: 1200 SERIES: BS 02 &BS SKF: 1200 K SERIES: WITH TAPERED BS O2 K & BORE: BS 12 K LIGHT WIDE SERIES 04 - SKF: 2200 SERIES: BS SKF: 2200K SERIES: WITH TAPERED BORE BS 22 K 06 - SKF: 2200 RRS /RIV :AJL SERIES: WITH TWO RUBBER SEALS BS 22 EE 07 - RIV: AJLK SERIES: WITH TWO RUBBER SEALS AND TAPERED BORE MEDIUM SERIES BS 22 EEK 11 - SKF: 1300 SERIES BS SKF: 1300 K SERIES: WITH TAPERED BORE BS 03 K MEDIUM WIDE SERIES 13 - SKF: 2300 SERIES: BS SKF: 2300 K SERIES: WITH TAPERED BORE BS 23 K 15 - RIV : BJL SERIES: WITH TWO RUBBER SEALS BS 23 EE 16 - RIV: BJLK SERIES: WITH TWO RUBBER SEALS AND TAPERED BORE BS 23 EEK Date : FEBRUARY 2002 M,ARCH 1978 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 20

23 CORPORATE MATERIAL AA XX DESCRIPTION ISO NO HEAVY SERIES 20 - SKF: SERIES: BS 04 HEAVY WIDE SERIES 21 - SKF: 1400 SERIES BS to - RESERVE to - RESERVED FOR INCH SERIES 99 - INCH SERIES LIGHT SERIES 99 - SKF: RL SERIES: 98 - SKF: RLK SERIES: WITH TAPERED BORE MEDIUM SERIES: 95 - SKF: RM SERIES: 94 - SKF : RMK SERIES: WITH TAPERED BORE to - RESERVE to - RESERVED FOR INCH SERIES 99 - Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 21

24 CORPORATE MATERIAL AA XX - DOUBLE ROW SELF ALIGNING (RADIAL) BALL BEARINGS WITH COMBINATIONS AA XX DESCRIPTION ISO NO 01 - SKF: 1200 K + H SERIES: WITH TAPERED BORE AND ADAPTER SLEEVE 02 - SKF: 1200 K+H + KM SERIES: WITH TAPERED BORE, ADAPTER SLEEVE AND SHAFT NUT 03 - SKF: 1200 K + H + KM +MB SERIES: WITH TAPERED BORE, ADAPTER SLEEVE, SHAFT NUT AND WASHER 04 - SKF: 1200 K + SN SERIES: WITH TAPERED BORE AND PLUMMER BLOCK 05 - SKF: 1200 K +H+KM+MB+ SN SERIES: WITH TAPERED BORE, ADAPTER SLEEVE, SHAFT NUT, WASHER, PLUMMER BLOCK SKF: 2200 K+H SERIES: WITH TAPERED BORE AND ADAPTER SLEEVE 08 - SKF: 2200 K+H+KM SERIES: WITH TAPERED BORE, ADAPTER SLEEVE AND SHAFT NUT 09 - SKF: 2200 K+H+KM+MB SERIES: WITH TAPERED BORE, ADAPTER SLEEVE, SHAFT NUT AND WASHER 10 - SKF: 2200 K + SN SERIES: WITH TAPERED BORE AND PLUMMER BLOCK 11 - SKF: 2200 K + H+ KM + MB + SN SERIES: WITH TAPERED BORE, ADAPTER SLEEVE, SHAFT NUT, WASHER AND PLUMMR BLOCK SKF: 1300 K +H SERIES: WITH TAPERED BORE, ADAPTER SLEEVE 14 - SKF: 1300 K+H+KM SERIES: WITH TAPERED BORE, ADAPTER SLEEVE, SHAFT NUT AND WASHER 15 - SKF: 1300 K+H+KM+MB SERIES: WITH TAPERED BORE, ADAPTER SLEEVE, SHAFT NUT AND WASHER 16 - SKF: 1300 K + SN SERIES: WITH TAPERED BORE AND PLUMMER BLOCK 17 - SKF: 1300 K + H+ KM + MB + SN SERIES: WITH TAPERED BORE, ADAPTER SLEEVE, SHAFT NUT AND WASHER SKF: 2300 K + H SERIES: WITH TAPERED BORE AND ADAPTER SLEEVE Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 22

25 CORPORATE MATERIAL AA XX DESCRIPTION ISO NO 20 - SKF: 2300 K + H + KM SERIES: WITH TAPERED BORE ADAPTER SLEEVE AND SHAFT NUT 21 - SKF: 2300 K + H + KM + MB SERIES: WITH TAPERED BORE, ADAPTER SLEEVE, SHAFT NUT AND WASHER SKF: 2300 K + SN SERIES: WITH TAPERED BORE AND PLUMMER BLOCK 23 - SKF: 2300 K + H+ KM + MB + SN SERIES: WITH TAPERED BORE, ADAPTER SLEEVE, SHAFT NUT, WASHER AND PLUMMER BLOCK 24 to - - RESERVE SKF: 1200 K+HA/HE/HS SERIES: WITH TAPERED BORE AND ADAPTER SLEEVE (INCH SIZE) 47 - SKF: 1200 K+HA/HE/HS + KM SERIES: WITH TAPERED BORE, ADAPTER SLEEVE (INCH SIZE) AND SHAFT NUT 48 - SKF: 1200 K + HA / HE/ HS + KM + MB SERIES: WITH TAPERED BORE, ADAPTER SLEEVE (INCH SIZE), SHAFT NUT, WASHER AND PLUMMER BLOCK 49 - SKF: 1200 K + HA / HE/ HS +KM+MB+SN SERIES: WITH TAPERED BORE, ADAPTER SLEEVE (INCH SIZE), SHAFT NUT, WASHER AND PLUMMER BLOCK SKF: 2200 K + HA/ HE/ HS SERIES: WITH TAPERED BORE AND ADAPTER SLEEVE ( INCH SIZE) 53 - SKF: 2200 K + HA/HE/HS + KM SERIES: WITH TAPERED BORE, ADAPTER SLEEVE (INCH SIZE ) AND SHAFT NUT 54 - SKF: 2200 K + HA/ HE / HS + KM + MB SERIES: WITH TAPERED BORE, ADAPTER SLEEVE (INCH SIZE), SHAFT NUT AND WASHER SKF: 1300 K + HA/ HE/ HS SERIES: WITH TAPERED BORE AND ADAPTER SLEEVE (INCH SIZE) 59 - SKF: 1300 K + HA / HE / HS + KM SERIES: WITH TAPERED BORE, ADAPTER SLEEVE (INCH SIZE) AND SHAFT NUT Date : FEBRYARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 23

26 CORPORATE MATERIAL Members reviewed the standard and no changes AA proposed XX DESCRIPTION ISO NO R&D will check the referred standards and issue reaffirmation 60notification. - SKF: 1300 K+ HA/ HE/ HS + KM + MB SERIES: WITH TAPERED BORE, ADAPTER SLEEVE (INCH SIZE), SHAFT NUT, WASHER 61 - SKF: 1200 K+H + KM SERIES: WITH TAPERED BORE, ADAPTER SLEV, SHAFT NUT AND WASHER MEDIUM SERIES 65 - R&M : SMJ SERIES: WITHOUT SPHERICAL SEATING RING 66 - R&M : SMJS SERIES: WITH SPHERICAL SEATING RING 67 X to X RESERVE 70 X 71 to - RESERVED FOR INCH SERIES 99 INCH SERIES: LIGHT SERIES: 99 - R&M: SLJ SERIES: WITHOUT SPHERICAL SATING RING 98 - R&M : SLJS SERIES: WITH SPHERICAL SEATING RING 97 - R&M: SLJH SERIES: WITH HOUSING MEDIUM SERIES 93 - R&M: SMJS SERIES: WITHOUT SPHERICAL SEATING RING 92 - R&M: SMJS SERIES: WITH SPHERICAL SEATING RING 91 - R&M: SMJH SERIES: WITH HOUSING 90 - to Date : FEBRYARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 24

27 CORPORATE MATERIAL AA XX - SINGLE ROW ANGULAR CONTACT (RADIAL) BALL BEARINGS AA XX DESCRIPTION ISO NO MAGNETO TYPE SERIES: 01 - GPZ: 6000 AND SKF:E SERIES: 02 - GPZ: 6700 SERIES: 03 - SKF: BO AND KOYO : BO SERIES: 04 - SKF: BM AND KOYO : BM SERIES: 05 - SKF: L AND KOYO: L SERIES: 06 - SKF: M AND KOYO : M SERIES: EXTRA LIGHT SERIES: 11 - SKF: 7000 C SERIES: CONTACT ANGLE 15 0 BN GPZ: , AND SERIES BZ 10, 11 & CONTACT ANGLE 26 0 : WITH SPLIT 19 INNER RING 13 - GPZ: SERIES: CONTACT ANGLE 26 0 BA GPZ: 6100 SERIES: WITH SEPARABLE OUTER RING 15 - GPZ: SERIES: CONTACT ANGLE 26 0 : BY 10 WITH SPLIT OUTER RING 16 - GPZ: SERIES: CONTACT ANGLE 26 0 : BA 10 D PRECISION GROUND LIGHT SERIES 20 - SKF: 7200 C SERIES: CONTACT ANGLE 15 0 BN SKF: 7200 CG SERIES: CONTACT ANGLE 15 0 BN 02 D PRECISION GROUND 22 - SKF: 7200 A SERIES: BN SKF: 7200 AG SERIES: PRECISION GROUND BN 02 D Date : FEBRYARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 25

28 CORPORATE MATERIAL AA XX DESCRIPTION ISO NO 24 - SKF: 7200 B SERIES: CONTACT BT 02 ANGLE SKF: 7200 BG SERIES: CONTACT BT 02 D ANGLE 40 0 : PRECISION GROUND 26 - HOFF: 100 CD SERIES: CONTACT ANGLE 35 0 : WITH SPLIT OUTER RING BY SKF: QJ 200 SERIES: WITH SPLIT BZ 02 INNER RING MEDIUM SERIES 32 - KOYO : 7300 C SERIES: BN SKF: 7300 CG SERIES: CONTACT ANGLE 15 0 : PRECISION GROUND BN 03 D 34 - SKF: 7300 A SERIES: BA SKF: 7300 AG SERIES: PRECISION GROUND BA 03 D 36 - SKF: 7300 B SERIES: CONTACT ANGLE 40 0 BT SKF: 7300 BG SERIES: CONTACT ANGLE 40 0 : PRECISION GROUND BT 03 D 38 - HOFF : 300 CD SERIES: CONTACT ANGLE 35 0 : WITH SPLIT OUTER RING BY SKF: QJ 300 SERIES: WITH SPLIT INNER RING BZ Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 26

29 CORPORATE MATERIAL AA XX DESCRIPTION ISO NO HEAVY SERIES SKF: 7400 A SERIES: AND GPZ: BA 04 SERIES: CONTACT ANGLE SKF: 7400 B SERIES: CONTACT ANGLE 40 0 : AND GPZ: SERIES: CONTACT ANGLE 36 0 BT HOFF: 500 CD SERIES: WITH SPLIT OUTER BY 04 RING 51 - HOFF: 500 CDS SERIES: WITH SPLIT INNER BZ 04 RING 52 - to - RESERVE to - RESERVED FOR INCH SERIES 99 - INCH SERIES: LIGHT SERIES: 99 - SKF: ALS SERIES AND NBC: LS - ACD SERIES: 98 - HOFF: L-CD SERIES: WITH SPLIT OUTER RING 97 - HOFF: L - CDS SERIES: WITH SPLIT INNER RING SKF: AMS SERIES AND NBC: MS- ACD SERIES: 93 - HOFF: M-CD SERIES: WITH SPLIT OUTER RING 92 - HOFF: M-CDS SERIES: WITH SPLIT INNER RING 91 - to - RESERVE 71 - Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 27

30 CORPORATE MATERIAL AA XX - DOUBLE ROW ANGULAR CONTACT (RADIAL) BALL BEARINGS AA XX DESCRIPTION ISO NO LIGHT SERIES: 01 - SKF: 3200 SERIES: WITH OR WITHOUT BJ 32, BG 32 & FILLING SLOT BE R&M: LDJT SERIES: WITH SPLIT OUTER RING BAA GPZ: SERIES: WITHOUT FILLING SLOT 04 - to - RESERVE 10 - MEDIUM SERIES 11 - SKF: 3300 SERIES: BG GPZ: SERIES: WITH SPLIT INNER RING 13 - R&M: MDJT SERIES: WITH SPLIT OUTER RING BAA to - RESERVE 20 - HEAVY SERIES: 21 - R&M: HDJK SERIES: WITH TAPERED BORE BJ R&M: HDJT SERIES: WITH SPLIT OUTER RING BAA to - RESERVE to - RESERVED FOR INCH SERIES 99 - Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 28

31 CORPORATE MATERIAL AA XX - SINGLE ROW CYLINDRICAL (RADIAL) ROLLER BEARINGS AA XX DESCRIPTION ISO NO LIGHT SERIES: 01 - GPZ: SERIES: WITH TWO LIPS ON INNER RING RN GPZ: SERIES: WITH TWO LIPS ON RU 19 OUTER RING EXTRA LIGHT NARROW SERIES 03 - ZKL: NG SERIES: WITH TWO LIPS ON RN 00 INNER RING 04 - GPZ: & SERIES: NON-STANDARD EXTRA LIGHT SERIES 05 - SKF: N1000 SERIES: WITH TWO LIPS ON RN 10 INNER RING 06 - SKF: NU 1000 SERIES: WITH TWO LIPS ON RU 10 OUTER RING 07 - SKF: NJ 1000 SERIES: WITH TWO LIPS ON OUTER RING AND ONE LIP ON INNER RING RJ SKF: NU 1000 K SERIES: WITH TAPERED BORE AND TWO LIPS ON OUTER RING RU 10 K LIGHT SERIES 09 - SKF: N200 SERIES: WITH TWO LIPS ON INNER RING RN SKF: NU 200 SERIES: WITH TWO LIPS ON RU 02 OUTER RING 11 - SKF: NJ 200 SERIES: WITH TWO LIPS ON OUTER RING AND ONE LIP ON INNER RING RJ SKF: NU 200 K SERIES: WITH TAPERED BORE AND TWO LIPS ON OUTER RING RU 02 K 13 - SKF: NH 200 SERIES: WITH TWO LIPS ON OUTER RING, ONE LIP ON INNR RING AND RJ 02 Z SEPARABLE THRUST RING Date : WG (BEARINGS) AUG,84 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 29

32 CORPORATE MATERIAL AA XX DESCRIPTION ISO NO 14 - SKF: NF 200 SERIES: WITH ONE LIP ON OUTER RING AND TWO LIPS ON INNER RING RF SKF: NP 200 SERIES: WITH TWO LIPS ON INNER RING, AND ONE LIP ON AND A FLAT SEPARABLE RING WITH OUTER RING RP SKF: NUJ 200 SERIES: WITH TWO LIPS ON OUTER RING AND SEPARABLE THRUST RING RU 02 Z 17 - SKF: NUP 200 SERIES: WITH TWO LIPS ON OUTR RING AND ONE LIP ON AND A FLAT SEPARABLE RING WITH INNER RING RT GPZ: SERIES: WITH TWO LIPS ON INNER RING AND TWO INTERNAL SNAP RINGS ON OUTER RING RK GPZ: 2700, 2800 & 2900 SERIES : NON-STANDARD LIGHT WIDE SERIES 20 - SKF: N 2200 SERIES: WITH TWO LIPS ON INNER RING RN SKF: NU 2200 SERIES: WITH TWO LIPS ON OUTER RING RU SKF: NU 220 SERIES: WITH TWO LIPS ON OUTR RING AND ONE LIP ON INNER RING RJ SKF: NH 2200 SERIES: WITH TWO LIPS ON OUTER RING, ONE LIP ON INNER RING AND SEPARABLE THRUST RING RJ 22 Z 24 - SKF: NF 2200 SERIES: WITH ONE LIP ON OUTER RING AND TWO LIPS ON INNER RING RF SKF: NP 2200 SERIES: WITH TWO LIPS ON INNER RING AND ONE LIP ON AND A FLAT SEPARABLE RING WITH OUTER RING RP SKF: NUJ 2200 SERIES: WITH TWO LIPS ON OUTER RING AND SEPARABLE THRUST RING RU 22 Z 27 - SKF: NUP 2200 SERIES: WITH TWO LIPS ON OUTER RING AND ONE LIP ON AND A FLAT SEPARABLE RING WITH INNER RING RT 22 Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 30

33 CORPORATE MATERIAL AA XX DESCRIPTION ISO NO MEDIUM SERIES 31 - SKF: N300 SERIES: WITH TWO LIPS ON INNER RING ON INNER RING RN SKF: NU 300 SERIES: WITH TWO LIPS ON OUTER RING RU SKF: NJ 300 SERIES: WITH TWO LIPS ON OUTER RING AND ONE LIP ON INNER RING RJ SKF: NH 300 SERIES: WITH TWO LIPS ON OUTER RING, ONE LIP ON INNER RING AND SEPARABLE THRUST RING RJ 03 Z 35 - SKF: NF 300 SERIES: WITH ONE LIP ON OUTER RING AND TWO LIPS ON INNER RING RF SKF:NP 300 SERIES: WITH TWO LIPS ON INNER RING AND ONE LIP ON AND A FLAT SEPARABLE RING WITH OUTER RING RP SKF: NUJ 300 SERIES: WITH TWO LIPS ON OUTER RING AND SEPARABLE THRUST RING RU 03 Z 38 - SKF: NUP 300 SERIES: WITH TWO LIPS ON OUTER RING AND ONE LIP ON AND A FLAT SEPARABLE RING WITH INNER RING RT GPZ: SERIES: WITH TWO LIPS ON INNER RING AND TWO INTERNAL SNAP RINGS ON OUTER RING RK 03 MEDIUM WIDE SERIES 40 - SKF: N 2300 SERIES: WITH TWO LIPS ON INNER RING RN SKF: NU 2300 SERIES: WITH TWO LIPS ON OUTER RING RU SKF: NJ 2300 SERIES; WITH TWO LIPS ON OUTER RING AND ONE LIP ON INNER RING RJ 23 Date : FEBRUARY 2002 MARCH 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 31

34 CORPORATE MATERIAL AA XX DESCRIPTION ISO NO 43 - SKF: NH 2300 SERIES: WITH TWO LIPS ON OUTER RING, ONE LIP ON INNER RING AND SEPARABLE THRUST RING RJ 23 Z 44 - SKF: NF 2300 SERIES: WITH ONE LIP ON OUTER RING AND TWO LIPS ON INNER RING RF SKF: NP 2300 SERIES: WITH TWO LIPS ON INNER RING AND ONE LIP ON AND A FLAT SEPARABLE RING WITH OUTER RING RP SKF: NUJ 2300 SERIES: WITH TWO LIPS ON OUTER RING AND SEPARABLE THRUST RING RU 23 Z 47 - SKF: NUP 2300 SERIES: WITH TWO LIPS ON OUTER RING AND ONE LIP ON AND A FLAT SEPARABLE RING WITH INNER RING RT HEAVY SERIES 52 - SKF: N 400 SERIES: WITH TWO LIPS ON INNER RN 04 RING 53 - SKF: NU 400 SERIES: WITH TWO LIPS ON OUTER RING RU SKF: NJ 400 SERIES: WITH TWO LIPS ON OUTER RING AND ONE LIP ON INNER RING RJ SKF: NH 400 SERIES: WITH TWO LIPS ON OUTER RING, ONE LIP ON INNER RING AND SEPARABLE THRUST RING RJ 04 Z 56 - SKF: NF 400 SERIES: WITH ONE LIP ON OUTER RING AND TWO LIPS ON INNER RING RF SKF: NP 400 SERIES: WITH TWO LIPS ON INNER RING AND ONE LIP ON AND A FLAT SEPARABLE RING WITH OUTER RING RP 04 Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 32

35 CORPORATE MATERIAL AA XX DESCRIPTION ISO NO 58 - SKF: NUJ 400 SERIES: WITH TWO LIPS ON OUTER RING, AND SEPARABLE THRUST RING RU 04 Z 59 - SKF: NUP 400 SERIES: WITH TWO LIPS ON OUTER RING AND ONE LIP ON AND A FLAT SEPARABLE RING WITH INNER RING RT GPZ: SERIES: WITH TWO LIPS ON INNER RING AND TWO INTERNAL SNAP RINGS ON OUTER RING RK to - RESRVE TORR: RU SERIES TO RESERVED FOR INCH SERIES: INCH SERIES EXRA LIGHT SERIES 99 - RHP: XLRJ SERIES: WITH TWO LIPS ON INNER RING LIGHT SERIES 98 - SKF: CRL SERIES: WITH TWO LIPS ON INNER RING 97 - RHP: LLRJ SERIES: WITH TWO LIPS ON OUTER RING 96 - R&M : LLRJA SERIES: WITH TWO LIPS ON OUTER RING AND ONE LIP ON INNER RING 95 - R&M : LLRJD SERIES: WITH TWO LIPS ON OUTER RING, ONE LIP ON INNER RING AND SEPARABLE THRUST RING 94 - SKF: CFL SERIES: WITH ONE LIP ON OUTER RING AND TWO LIPS ON INNER RING 93 - R&M : LRJB SERIES: WITH TWO LIPS ON INNER RING AND ONE LIP ON AND A FLAT SEPARABLE RING WITH OUTER RING Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 33

36 CORPORATE MATERIAL AA XX DESCRIPTION ISO NO 92 - R&M : LLRJC SERIES: WITH TWO LIPS ON OUTER RING, AND SEPARABLE THRUST RING 91 - RHP : LLRJB SERIES: WITH TWO LIPS ON OUTER RING AND A FLAT SEPARABLE RING WITH INNER RING 90 - RHP: LLRJN SERIES: WITH TWO LIPS ON INNER AND OUTER RINGS MEDIUM SERIES 86 - SKF: CRM SERIES: WITH TWO LIPS ON INNER RING 85 - RHP: MMRJ SERIES: WITH TWO LIPS ON OUTER RING 84 - RHP: MMRJA SERIES: WITH TWO LIPS ON OUTER RING AND ONE LIP ON INNER RING 83 - R&M : MMRJD SERIES: WITH TWO LIPS ON OUTER RING, ONE LIP ON INNER RING AND SEPARABLE THRUST RING 82 - RHP: MRJA SERIES: WITH TWO LIPS ON INNER RING AND ONE LIP ON OUTER RING 81 - R&M : MRJB SERIES: WITH TWO LIPS ON INNER RING AND ONE LIP ON AND A FLAT SEPARABLE RING WITH OUTER RING 80 - R&M: MMRJC SERIES: WITH TWO LIPS ON OUTER RING AND SEPARABLE THRUST RING 79 - RHP : MMRJB SERIES: WITH TWO LIPS ON OUTER RING AND A FLAT SEPARABLE RING WITH INNER RING 78 - RHP: MMRJN SERIES: WITH TWO LIPS ON INNER AND OUTER RINGS TO RESERVE Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 34

37 CORPORATE MATERIAL AA XX - DOUBLE CYLINDRICAL (RADIAL) ROLLER BEARINGS AA XX DESCRIPTION ISO NO EXTRA LIGHT SERIES: 01 - SKF: NN 3000 SERIES: WITH THREE LIPS ON INNER RING RD SKF:NN 3000 K SERIES : WITH TAPERED BORE AND THREE LIPS ON INNER RING RD 30 K 03 - SKF: NN 3100 SERIES: WITH THREE LIPS ON INNER RING RD SKF: NN 3100 K SERIES: WITH TAPERED BORE AND THREE LIPS ON INNER RING RD 31 K 05 - SKF: NNU 4900 SERIES: WITH THREE LIPS ON OUTER RING RA SKF: NNU 4900 K SERIES: WITH TAPERED BORE AND THREE LIPS ON OUTER RING RA 49 K to - RESERVE 70 - Date : FEBRUARY to - RESERVED FOR INCH SERIES 99 - ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 35

38 CORPORATE MATERIAL AA XX - FOUR ROW CYLINDRICAL (RADIAL) ROLLER BEARINGS AA XX DESCRIPTION ISO NO 01 - ZKL: NNU 60 SERIES: NO LIPS ON INNER AND OUTER RINGS AND TWO FLAT SEPARABLE RINGS WITH OUTER RING to - RESERVE to - RESERVED FOR INCH SERIES 99 - Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 36

39 CORPORATE MATERIAL AA XX - CYLINDRICAL (RADIAL) ROLLER BEARINGS WITH LONG ROLLERS AA XX DESCRIPTION ISO NO 01 - GPZ : SERIES: NON - STANDARD 02 - GPZ: SERIES: NON-STANDARD 03 - GPZ: SERIES: NON-STANDARD WITH TWO LIPS ON INNER RING to - RESERVE to - RESERVED FOR INCH SERIES 99 Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 37

40 CORPORATE MATERIAL AA XX - SINGLE ROW SELF ALIGNING (SPHERICAL) RADIAL ROLLER BEARINGS AA XX DESCRIPTION ISO NO 01 - SKF: SERIES: SR SKF: K SERIES: WITH TAPERED BORE SR 02 K 03 - SKF: K+H SERIES: WITH TAPERED BORE AND ADAPTER SLEEVE 04 - FAG: K+AH SERIES: WITH TAPERED BORE AND WITHDRAWAL SLEEVE R&M : SLLRJS SERIES: WITH SPHERICAL SEATING RING MEDIUM SERIES 09 - SKF: SERIES: SR SKF: K SERIES: WITH TAPERED BORE SR 03 K 11 - SKF: K +H SERIES: WITH TAPERED BORE AND ADAPTER SLEEVE 12 - FAG: K + AH SERIES: WITH TAPERED BORE AND WITHDRAWAL SLEEVE R&M: SMMRJS SERIES: WITH SPHERICAL SEATING RING HEAVY SERIES 17 - FAG: SERIES: SR FAG: K SERIES: WITH TAPERED BORE SR 04 K 19 - to - RESERVE MC GILL: SB22200 SERIES WITHOUT SEAL AND SB22200S SERIES WITH SEAL Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 38

41 CORPORATE MATERIAL AA XX DESCRIPTION ISO NO 71 - to - RESERVED FOR INCH SERIES 99 - INCH SERIES LIGHT SERIES 99 - R&M:SLLRJ SERIES: WITHOUT SPHERICAL SEATING RING 98 - R&M: SLLRJS SERIES: WITH SPHERICAL SEATING RING 97 - R&M: SLRJH SERIES: WITH HOUSING MEDIUM SERIES 96 - R&M:SMMRJ SERIES: WITHOUT SPHERICAL SEATING RING 95 - R&M: SMMRJS SERIES: WITH SPHERICAL SEATING RING 94 - R&M: SMRJH SERIES: WITH HOUSING TO RESRVE Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 39

42 CORPORATE MATERIAL AA XX - DOUBLE ROW SELF ALIGNING (SPHERICAL)RADIAL ROLLER BEARINGS AA XX DESCRIPTION ISO NO EXTRA LIGHT SERIES 01 - SKF: C SERIES: SD SKF: CK SERIES: WITH TAPERED BORE SD 30 K 03 - SKF: CK + H SERIES: WITH TAPERED BORE AND ADAPTER SLEEVE 04 - SKF: CK + H + KM +MB SERIES: WITH TAPERED BORE, ADAPTER SLEEVE, SHAFT NUT AND WASHER 05 - SKF:23000 CK + AH SERIES: WITH TAPERED BORE AND WITHDRAWAL SLEEVE SKF: C SERIES: SD SKF: CK 30 SERIES: WITH TAPERED BORE (TAPER 1:30) SD 40 T SKF:24000 CK 30 + AH SERIES: WITH TAPERED BORE (TAPER 1:30) AND WITHDRAWAL SLEEVE SKF: C SERIES: SD SKF: CK SERIES: WITH TAPEED BORE SD 31 K 17 - SKF: CK+H SERIES: WITH TAPERED BORE AND ADAPTER SLEEVE 18 - SKF: CK: AH SERIES: WITH TAPERED BORE AND WITHDRAWAL SLEEVE SKF: C SERIES: SD 41 Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 40

43 CORPORATE MATERIAL AA XX DESCRIPTION ISO NO 23 - SKF: CK 30 SERIES: WITH TAPERED BORE (TAPER 1:30) SD 41 T SKF: CK 30 + AH SERIES: WITH TAPEED BORE (TAPER 1:30) AND WITHDRAWAL SLEEVE SKF: C SERIES: SD SKF: C + MB SERIES: WITH WASHER 31 - SKF: CK SERIES: WITH TAPERED BORE SD 22 K 32 - SKF: CK + H SERIES: WITH TAPERED BORE AND ADAPTER SLEEVE 33 - SKF: CK + H + KM + MB SERIES: WITH TAPERED BORE, ADAPTER SLEEVE, SHAFT NUT AND WASHER 34 - SKF: CK + AH SERIES: WITH TAPERED BORE AND WITHDRAWAL SLEEVE SKF: C SERIES: SD SKF: CK SERIES: WITH TAPRED BORE SD 32 K 40 - SKF: CK + H SERIES: WITH TAPERED BORE AND ADAPTER SLEEVE 41 - SKF: CK + AH SERIES: WITH TAPERED BORE AND WITHDRAWAL SLEEVE Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 41

44 CORPORATE MATERIAL AA XX DESCRIPTION ISO NO MEDIUM SERIES 46 - SKF: C SERIES: SD SKF: K SERIES: WITH TAPERED BORE SD 03 K 48 - SKF: K + H SERIES: WITH TAPERED BORE AND ADAPTER SLEEVE 49 - SKF: K + AH SERIES: WITH TAPERED BORE AND WITHDRAWAL SLEEVE SKF: C SERIES: SD SKF: CK SERIES: WITH TAPERED BORE SD 23 K 55 - SKF: CK + H SERIES: WITH TAPERED BORE AND ADAPTER SLEEVE 56 - SKF: CK + AH SERIES: WITH TAPERED BORE AND WITHDRAWAL SLEEVE to - RESERVE to - RESERVED FOR INCH SERIES 99 - Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 42

45 CORPORATE MATERIAL AA XX - SINGLE ROW RIGID RADIAL NEEDLE ROLLER BEARINGS (WITHOUT INNER RING) AA XX DESCRIPTION ISO NO 01 - INA: NK SERIES: WITH HARD SHOULDER AND WITHOUT SEAL 02 - INA:NK WIDE SERIES: WITH HARD SHOULDER AND WITHOUT SEAL 03 - INA: NKS SERIES: WITH HARD SHOULDER AND WITHOUT SEAL INA: RNA 69 SERIES: WITH HARD SHOULDER AND WITHOUT SEAL 07 - INA: RNA 48 SERIES: WITH HARD SHOULDER AND WITHOUT SEAL 08 - INA: RNA 49 SERIES: WITH HARD SHOULDER AND WITHOUT SEAL NADELLA: NA 1000s/ Bi SERIES: WITH HARD SHOULDER AND WITHOUT SEAL 12 - NADELLA: Na 2000s/Bi SERIES: WITH HARD SHOULDER AND WITHOUT SEAL 13 - NADELLA Na 3000s/Bi SERIES: WITH HARD SHOULDER AND WITHOUT SEAL 14 - NADELLA: Na 22000s/Bi SERIES: WITH HARD SHOULDER AND WITHOUT SEAL GPZ: SERIES: WITH HARD SHOULDER AND WITHOUT SEAL 18 - GPZ: SERIES: WITH HARD SHOULDER AND WITHOUT SEAL INA: RNA 49 RS SERIES: WITH HARD SHOULDER AND WITHOUT SEAL 22 - INA : RNA 49 RRS SERIES: WITH HARD SHOULDER AND WITHOUT SEAL Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 43

46 CORPORATE MATERIAL AA XX DESCRIPTION ISO NO 23 - INA: RNAO SERIES: WITHOUT HARD SHOULDER AND SEAL 24 - NADELLA: NaB s/bi SERIES: CAM FOLLOWERS GPZ: 941/ 942 / AND 943 / SERIES: WITH ONE STAMPED OUTER RING INA: HK SERIES: SHELL TYPE WITH OPEN ENDS 33 - INA: HKRS SERIES: WITH ONE SEAL 34 - INA: HKRRS SERIES: WITH TWO SEALS INA: BK SERIES: SHELL TYPE WITH ONE CLOSED END 39 - INA: BKRS SERIES: WITH ONE CLOSED END AND SEAL NADELLA: DL SERIES 43 - NADELLA: DLH SERIES: WITH OIL HOLE 44 - NADELLA: DLF SERIES: WITH ONE CLOSED END 45 - NADELLA: DLFH SERIES: WITH ONE END CLOSED AND OIL HOLE to - RESERVE to - RESERVED FOR INCH SERIES 99 - INCH SERIES 99 - TORR: B SERIES: OPEN END, DC TYPE 98 - to - RESERVE 71 - Date : WG (BEARINGS) AUG,84 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 44

47 CORPORATE MATERIAL AA XX - DOUBLE ROW RIGID RADIAL NEEDLE ROLLER BEARINGS (WITHOUT INNER RING) AA XX DESCRIPTION ISO NO 01 - INA: RNA 69 SERIES: WITH HARD SCHOULDER AND WITHOUT SEAL GPZ: SERIES: WITH HARD SHOULDER AND WITHOUT SEAL 06 - GPZ: SERIES: WITH HARD SHOULDER AND WITHOUT SEAL IAN : RNAO SERIES: WITHOUT HARD SHOULDER AND SEAL 12 - GPZ: SERIES: NON-STANDARD to - RESERVE to - RESERVED FOR INCH SERIES 99 - Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 45

48 CORPORATE MATERIAL AA XX - SINGLE ROW RIGID RADIAL NEEDLE ROLLER BEARINGS (WITH INNER RING) AA XX DESCRIPTION ISO NO 01 - INA: NKI SERIES: WITH HARD SHOULDER AND WITHOUT SEAL 02 - INA:NKI WIDE SERIES: WITH HARD SHOULDER AND WITHOUT SEAL 03 - INA: NKIS SERIES: WITH HARD SHOULDER AND WITHOUT SEAL INA : NA 48 SERIES: WITH HARD SHOULDER AND WITHOUT SEAL 06 - INA: NA 49 SERIES: WITH HARD SHOULDER AND WITHOUT SEAL NADELLA: Na 1000 SERIES: WITH HARD SHOULDER AND WITHOUT SEAL 09 - NADELLA: Na 2000 SERIES: WITH HARD SHOULDER AND WITHOUT SEAL 10 - NADELLA: Na 3000 SERIES: WITH HARD SHOULDER AND WITHOUT SEAL GPZ: SERIES: WITH HARD SHOULDER AND WITHOUT SEAL 14 - GPZ: SERIES: WITH HARD SHOULDER AND WITHOUT SEAL 15 - GPZ: SERIES: WITH HARD SHOULDER AND WITHOUT SEAL 16 - GPZ: SERIES: WITH HARD SHOULDER AND WITHOUT SEAL INA: NA 49 RS SERIES: WITH SHOULDER AND ONE SEAL Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 46

49 CORPORATE MATERIAL AA XX DESCRIPTION ISO NO 21 - INA: NA 49 RRS SERIES: WITH SHOULDER AND TWO SEALS 22 - NADELLA: Na --- B6/Na B SERIES: CAM FOLLOWERS 23 - INA: NAO SERIES: WITHOUT HARD SHOULDER AND SEAL NADELLA: DL SERIES: WITH OIL HOLE 28 - NADELLA: DLH SERIES: WITH OR WITHOUT OIL HOLE 29 - to - RESERVE NADELLA: DLF SERIES: WITH ONE CLOSED END 37 - NADELLA: DLFH SERIES: WITH ONE CLOSED END AND WITH OR WITHOUT OIL HOLE GPZ: SERIES: UNIVERSAL JOINT TYPE 41 - GPZ: SERIES: UNIVERSAL JOINT TYPE 42 - to - RESERVE to - RESERVED FOR INCH SERIES 99 Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 47

50 CORPORATE MATERIAL AA XX - DOUBLE ROW RIGID RADIAL NEEDLE ROLLER BEARINGS (WITH INNER RING)/DOUBLE ROW SHELL TYPE NEEDLE ROLLER BEARINGS AA XX DESCRIPTION ISO NO DOUBLE ROW RIGID RADIAL NEEDLE ROLLER BEARINGS (WITH INNER RING) 01 - INA:NA 69 & 6900 SERIES: WITH HARD SHOULDER AND WITHOUT SEAL 02 - GPZ: SERIES: WITH HARD SHOULDER AND WITHOUT SEAL 03 - GPZ: SERIES: WITH HARD SHOULDER AND WITHOUT SEAL 04 - INA: NA 0 SERIES: WITHOUT HARD SHOULDER AND SEAL 05 - to - RESERVE 10 - DOUBLE ROW SHELL TYPE NEEDLE ROLLER BEARINGS 11 - INA: HK SERIES: 12 - INA: BK SERIES: WITH ONE CLOSED END 13 - to - RESERVE TO RESERVED FOR INCH SERIES Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 48

51 CORPORATE MATERIAL AA XX - ADJUSTABLE NEEDLE ROLLER BEARINGS: AA XX DESCRIPTION ISO NO 01 - INA: NA 49 S SERIES: WITH INNER RING to - RESERVE to - RESERVED FOR INCH SERIES 99 - Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 49

52 CORPORATE MATERIAL AA XX - SELF ALIGNING NEEDLE ROLLER BEARINGS: AA XX DESCRIPTION ISO NO 01 - INA: PNA SERIES: WITH INNER RING to - RESERVE to - RESERVED FOR INCH SERIES 99 - Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 50

53 CORPORATE MATERIAL AA XX - COMBINED RADIAL NEEDLE ROLLER AND THRUST EALL BEARINGS AA XX DESCRIPTION ISO NO SINGLE ROW NEEDLE AND SINGLE / DOUBLE THRUST BALL BEARINGS 01 - INA: NKX + IR SERIES: WITH INNER RING 02 - INA: NKXZ + IR SERIES: WITH DUST SHIELD AND INNER RING 03 - INA: NKIA 59 SERIES: ANGULAR CONTACT 04 - INA: NKIB 59 SERIES: DOUBLE THRUST ANGULAR CONTACT 05 - to - RESERVE 15 - DOUBLE ROW NEEDLE AND SINGLE THRUST BALL BEARINGS 16 - NADAX: NAXJ SERIES: 17 - to - RESERVE to - RESERVED FOR INCH SERIES 99 - Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 51

54 CORPORATE MATERIAL AA XX - COMBINED RADIAL NEEDLE ROLLER AND THRUST ROLLER BEARINGS AA XX DESCRIPTION ISO NO SINGLE ROW NEEDLE AND SINGLE THRUST ROLLER BEARINGS 01 - INA: NKXR + IR SERIES: WITH INNER RING 02 - INA: NKXZ + IR SERIES: WITH INNER RING to - RESERVE to - RESERVED FOR INCH SERIES 99 - Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 52

55 CORPORATE MATERIAL AA XX - NEEDLE ROLLER DOUBLE THRUST BEARINGS AA XX DESCRIPTION ISO NO 01 - INA: ZAXI SERIES: SHAFT LOCATING 02 - INA: ZAXA SERIES: BORE LOCATING to - RESERVE to - RESERVED FOR INCH SERIES 99 - Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 53

56 CORPORATE MATERIAL AA XX - CYLINDRICAL ROLLER SINGLE THRUST BEARINGS AA XX DESCRIPTION ISO NO 01 - INA: 811 SERIES: SINGLE ROW 02 - INA: 812 SERIES: SINGLE ROW 03 - INA: 893 SERIES: DOUBLE ROW 04 - INA: 874 SERIES: MULTI - ROW 05 - GPZ: SERIES: THREE ROW to - RESERVE to - RESERVED FOR INCH SERIES 99 - Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 54

57 CORPORATE MATERIAL AA XX - CYLINDRICAL ROLLER DOUBLE THRUST BEARINGS AA XX DESCRIPTION ISO NO 01 - INA: JARI SERIES: WITH DOUBLE THRUST WASHER - SHAFT LOCATING INA: JARI SERIES: WITH DOUBLE THRUST WASHER - BORE LOCATING to - RESERVE to 99 - RESERVED FOR INCH SERIES Date : FEBRUARY 2002 ADDITIONS & CHANGES TO BE APPROVED BY IPSC PAGE NO : A - 55