ECLIPSE TURBO BLOWERS SERIES SMJ
|
|
- Ethan Ward
- 5 years ago
- Views:
Transcription
1 Bulletin /9 ECLIPSE TURBO BLOWERS SERIES SMJ High efficiency Heavy gauge steel base and housing Aluminum impellers balanced statically and dynamically Matching air filters available Changeable outlet positions Eclipse SMJ Blowers are centrifugal blowers that provide low pressure air for industrial combustion systems. They are also used for cooling, conveying, drying, liquid agitation, smoke abatement, vacuum cleaning, fume and dust exhausting, and other appli-cations where air temperatures are under 0ûF (ûc). All SMJ Blowers are constructed of continuous welded, heavy gauge steel. The impellers are made of lightweight, high strength, riveted aluminum. Outlets on and models are threaded, while all others are flanged for a standard # ANSI companion flange. Discharge ports are sized to keep pressure losses within reasonable limits. Blower inlet flanges are equipped with a grill that complies with OSHA regulations. If desired, the grill may be removed and the inlet bolted to a standard ANSI companion flange. Eclipse-supplied motors are standard shaft and starting torque, ball bearing, 00 rpm units. On any blower requiring / HP or more, Eclipse recommends that polyphase motors be used. There are four possible outlet positions. Any exist-ing position is easily changed by removing the hous-ing from the blower base and remounting it in the desired position. Positions through can be speci-fied for any blower. Position, however, requires fac-tory approval before ordering. Position is the stan-dard assembly (bottom, horizontal) unless otherwise specified. SMJ Blowers can be supplied with counterclock-wise (CCW) or clockwise (CW) rotation as viewed from the motor side. CCW rotation is furnished stan-dard unless otherwise specified. # # Outlet Positions # #
2 Model Variations Type D A.M.C.A. Arrangement # Type D construction features a separate impeller shaft connected to the motor shaft by a flexible coupling. It is often used where immediate interchangibility of motors is required (photo shows inlet filter installed). Single Washable Element (Double Also Available) Bulletin Type P A.M.C.A. Arrangement # Type P construction permits the blower to be driven by a gasoline engine, line shaft or other separate power source. Air Inlet Filters Filters must be ordered separately. Non-washable Cylindrical Element Bulletin Type V A.M.C.A. Arrangement #9 Type V construction is normally used when 0 cycle AC current is not available and motor speeds result in less than standard rpm. The V-belt drives the impeller at standard rpm regardless of motor speed. Round Replaceable Element Bulletin Model AA-A- Bulletin I- Pressure Switches Eclipse-Dungs Air Pressure Switch Model A is available in a wide selection of setpoint pressure ranges for a maximum pressure of PSI (9 mbar). This pressure switch is CSA certified, FM approved and UL listed. Its calibrated blue knob provides easy and accurate adjustment. A / N.P.T. high pressure air inlet connection is located on the switch bottom. Catalog Number FAJ-S FAJ-M 0FAJ 0FAJ-S 0FAJ-M 0FAJ-L Assembly Number Round Filters Blower Inlet & & & & & Max. Capacity SCFH,000,000 0,000 0,000 0,000 0,000 m/hr. 0 0,,,,0 The discharge pressure of the blower will be reduced by approximately. w.c. (. mbar) with the filter assembly installed.
3 Blower Catalog No. SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ 0 SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ Motor HP / - / / - / - - / Capacities - 00 rpm Motor Service Factor Inlet Nominal Rating w.c. SCFH mbar m/hr ,900 *,000 * 0,00 *,00 *,00 *,000 *,00,000 * 9,00 9,000,000,00,000,000 *,00,00,0,000,000,000,000,00,000 0,000 *,000 *,000 0,000,00,000,000 *,000 *,000 *,00,00 0,000,00 0,000 0,000 9,0,00 0,00 0,000,00 09,000 *,00,00 9,0,000,00,000 *,00,000,00,000,000,00,000 0,000 9,00 0,000,00,0,000 9,000 * 9, * *, * * * 9 * 99, *,0,9,09,,0 * 00,9 90,,,9 *, *,,,0 *,0 *, *,9,,9,99,,,9 *,0,9,, *,,0,0,9,0,,, 9,,90 *, Pressures are corrected for an air inlet temperature of 0 F ( C) and a barometric pressure of 9.9 Hg (.0 bar). *Greater flows available at reduced pressure. See blower curves for details (Data ).
4 G Dimensions & Specifications English Units H D K C N.P.T. Outlet B B + K - C J A E F E R N Q Mounting Slots () /" Wide By /" Long Flanged Outlet Threaded Outlet Base* M L Dimensions, In Inches L M N P Q R -/ 9-/ -/ 9-/ -/ -/ / -/ - -/ / -/ -/ -/ -/ -/ -/ * See the main dimension table to find the base used on each blower. Bolt Circle Diameter T Nominal Pipe Flange Dimensions P Dimensions, In Inches S T U V / -/ / / / / Bolt Hole Diameter U V - Number of Bolt Holes S O.D. Bolt Dia. / / / / / / Flange bolt patterns match ANSI # standards. Bolt Dia. Dimension K And Blower Motor Specifications All motors are 00 RPM. HP / / / / / / / / Encl. Frame T T T T T T T T T T T T T T T T T T S.F Dim. K (Inches) / -/ -/ -/ -/ -/ -/ -/ V./Ph./Hz. 0//0 0//0 0/0//0 0/0//0 0//0 0//0 0/0//0 0/0//0 0/0//0 0/0//0 0//0 0//0 0/0//0 0/0//0 0//0 0/0//0 0/0//0 0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 Part
5 Dimensions & Specifications English Units (continued) Blower Catalog No. SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ 0 SMJ SMJ SMJ SMJ Motor HP / & / & / - & / / & / & &- - & - - & & D E & -,-,D E D E & & - - & - & & & D E,0,D E - D E & 0 0 D E & D E D E 0 D E D E Inlet Outlet Dimensions In Inches A B C D E F G H J 9-/ -/ 9-/ -/ 9-/ - - -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ - - -/ -/ - 0-/ / 0-/ 0-/ 0-/ -/ -/ 0-/ 0-/ 0-/ 0-/ 0-/ -/ -/ -/ -/ / -/ -/ - - -/ -/ -/ / -/ -9/ -/ -/ -/ 9-/ 9-/ -/ -/ -9/ -/ -/ -/ -/ 9-/ 9-/ 9-/ 9-/ -9/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ 9-/ 9-/ -/ -/ -/ -/ -/ -/ -/ -/ -/ 9-/ 9-/ -/ -/ -/ -/ -/ -/ -/ -/ -/ - -/ -/ -/ -/ -/ -/ / -9/ -9/ -9/ D=open motor; E=enclosed motor. Horsepowers with no letter suffix are either open or enclosed. -/ -9/ -9/ -/ -/ -/ 9-/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ 9-9/ 9-9/ -/ -/ -/ -/ -/ -/ -/ -/ -/ - -/ -/ - -/ -/ -/ -/ -9/ -/ -/ -/ -9/ -9/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -9/ -9/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ - -/ -/ -9/ -/ -/ -/ -/ - -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ - -/ -/ -/ -9/ -9/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ 9/ -9/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Base Refer to the base chart on page for base mounting dimensions. Signifies an N.P.T. threaded outlet. All other blowers have flanged outlets with standard ANSI # bolt patterns. All inlets are flanged. Companion flanges are not standard, but are available at a nominal cost. To Order: Specify blower catalog number, CW or CCW rotation, motor HP, open or, voltage and frame size.
6 Dimensions & Specifications Metric Units G H D K C N.P.T. Outlet B B + K - C Base* J M L Dimensions (mm) L M N P Q R R * See the main dimension table to find the base used on each blower. Nominal Pipe 0 0 A N Q Flange Dimensions Bolt Circle Diameter T Dimensions (mm) S T U V Mounting Slots () mm /" Wide Wide By By /" mm Long Long 9 Flange bolt patterns match ANSI # standards. P Bolt Hole Diameter U V - Number of Bolt Holes S O.D. Bolt Dia. Bolt Dia. E Flanged Outlet Dimension K And Blower Motor Specifications All motors are 00 RPM HP / / / / / / / / F Encl. Frame T T T T T T T T T T T T T T T T T T S.F Dim. K (mm) E 9 Threaded Outlet V./Ph./Hz. 0//0 0//0 0/0//0 0/0//0 0//0 0//0 0/0//0 0/0//0 0/0//0 0/0//0 0//0 0//0 0/0//0 0/0//0 0//0 0/0//0 0/0//0 0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 0/0//0 Part
7 Dimensions & Specifications Metric Units (continued) Blower Catalog No. SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ SMJ 0 SMJ SMJ SMJ SMJ Motor HP / & / & / - & / / & / & &- - & - - & & D E & -,-,D E D E & & - - & - & & & D E,0,D E - D E & 0 0 D E & D E D E 0 D E D E Inlet Outlet NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT Dimensions In Millimeters A B C D E F G H J D=open motor; E=enclosed motor. Horsepowers with no letter suffix are either open or enclosed. Refer to the base chart on page for base mounting dimensions. Signifies an N.P.T. threaded outlet. All other blowers have flanged outlets with standard ANSI # bolt patterns. All inlets are flanged. Companion flanges are not standard, but are available at a nominal cost Base To Order: Specify blower catalog number, CW or CCW rotation, motor HP, open or, voltage and frame size.
8 Offered By: Power Equipment Company 0 Williamsburg Road Richmond, Virginia Phone (0) -00 Fax (0) -
ECLIPSE TURBO BLOWERS SERIES SMJ
Bulletin /0 ECLIPSE TURBO BLOWERS SERIES SMJ High efficiency Heavy gauge steel base and housing Aluminum impellers balanced statically and dynamically Matching air fi lters available Changeable outlet
More informationEclipse RatioAir Burners
Parameter Maximum Input, BTU/hr (kw) 1, Minimum Input, BTU/hr (kw) Lower inputs may be achieved. Contact factory. Main Gas Inlet Pressure, "w.c. (mbar) 3 Fuel pressure at ratio regulator inlet. High Fire
More informationTurbo Pressure Blowers
www.americanfan.com Bulletin VP4 Turbo Pressure Blowers Howden Industrial Fan Group American Fan / Joy Fan / Garden City Fan Features Heavy gauge continuously welded housings, reversible and rotatable
More informationSQAF AIRFOIL BLOWERS CLASS IP CLASS II CLASS IIP CLASS III. OEM and Industrial Air Handling Specialist
OEM and Industrial Air Handling Specialist SQAF AIRFOIL BLOWERS CLASS IP CLASS II CLASS IIP CLASS III 69 Snider Road, Mason, OH 4040-913 Telephone: 13-3-0600 Visit us at www.cincinnatifan.com for more
More informationDefining Innovation. turbo pressure blowers. Twin City Catalog 1200
Defining Innovation. turbo pressure blowers MODEL TBA TBR 1 Twin City Catalog CATALOG -A May 11 Model TBA/TBR Turbo Pressure Blowers Model TBA and TBR fans from Twin City Fan & Blower are constant pressure,
More informationPRESSURE BLOWERS. Capacities to 5,200 CFM Two wheel choices. Static pressures to 58 WG Temperatures to 600 F.
BULLETIN 451 SEPTEMBER, 2011 PRESSURE BLOWERS Capacities to 5,200 Two wheel choices Static pressures to 58 WG Temperatures to 600 F. THE NEW YORK BLOWER COMPANY 7660 Quincy Street Willowbrook, IL 60527-55
More informationRatioAir Burners. Model RA1000. Data /31/05. Main Specifications - RA1000
Main Specifications - RA1000 PARAMETER Maximum input, Btu/hr (kw) at neutral chamber conditions. (Natural Gas) 60Hz Packaged Blower 50Hz Packaged Blower Minimum input, Btu/hr (kw) Lower inputs may be achieved.
More informationRatioAir Burners. Model RA0750. Data /31/05. Main Specifications - RA0750
Main Specifications - RA0750 PARAMETER Maximum input, Btu/hr (kw) at neutral chamber conditions. (Natural Gas) 60Hz Packaged 50Hz Packaged Minimum input, Btu/hr (kw) Lower inputs may be achieved. Contact
More informationTURBO PRESSURE BLOWERS
Twin City Fan INUSTRIAL PROCESS AN COMMERCIAL VENTILATION SYSTEMS TURBO PRESSURE BLOWERS TBNA TBNS CATALOG 12 AUGUST 14 TURBO PRESSURE BLOWERS Overview TBNA I TBNS The TBN series of fans are low volume,
More informationTubular Centrifugal Fans
Tubular Centrifugal Fans Model TCB Inline - Horizontal or Vertical Roof Upblast and Roof Supply March 2007 Tubular Centrifugal Fans The TCB series of inline centrifugal fans is designed for ducted inline,
More informationEclipse Hermetic Gas Boosters
Information Guide 620 12/1/2008 Eclipse Hermetic Gas Boosters Series HB & HBLC Version 1 Applications Eclipse Inc., produces a line of single stage, centrifugal type, hermetically sealed gas boosters for
More informationIndustrial Material Handler Page Introduction... 2 Information Specifications MH Specifications... 6 MHR Specifications...
Industrial Material Handler Page Introduction.......................................... 2 Information.......................................... 3-5 Specifications MH Specifications.....................................
More informationPRESSURE BLOWERS. Capacities to 5,200 CFM Two wheel choices. Static pressures to 58 WG Temperatures to 600 F.
BULLETIN 451 MARCH, 2014 PRESSURE BLOWERS Capacities to 5,200 Two wheel choices Static pressures to 58 WG Temperatures to 600 F. THE NEW YORK BLOWER COMPANY 7660 Quincy Street Willowbrook, IL 60527-55
More informationBulletin ACF 103 AIRFOIL CENTRIFUGAL FANS DESIGN 10A
Bulletin ACF 103 AIRFOIL CENTRIFUGAL FANS DESIGN 10A Quieter, More Efficient Airfoil Fans for Commercial and Light Industrial Applications Design 10A Fans with Airfoil Wheels Fourteen Sizes to 80" Volumes
More informationCentrifugal Utility Fans - SFD/SFB
C H F D B G E A Centrifugal Utility Fans - SFD/SFB SFB STANDARD CONSTRUCTION FEATURES HOUSING: Heavy gauge steel housing with Lock-seam construction Unit support angles with prepunched mounting holes Adjustable
More informationVibration Isolators (6) Galvanized Wheel. Sealed Ball Bearing. Standard Duct Size Inlet Ring
The Lau FGP Series Blower is perfect for use in ventilating, exhausting, air conditioning, processing and general industrial applications. Cold Rolled Steel: all welded construction with painted enamel
More informationFEATURES SELECTION CONSTRUCTION
Blower Business Group TURBO BLOWERS 4-44 OSI - 55-30,000 CFM Bulletin 2300 June 1998 FEATURES Widest range of sizes available in the turbo blower market to meet the needs of the combustion, drying, and
More informationCAST ALUMINUM PRESSURE BLOWERS
Twin City Fan INDUSTRIAL PROCESS AND COMMERCIAL VENTILATION SYSTEMS CAST ALUMINUM PRESSURE BLOWERS TPD TPB CATALOG 820 JANUARY 2013 PRESSURE BLOWERS Models TPD TPB Twin City Fan & Blower s Cast Aluminum
More informationTURBO PRESSURE BLOWERS
Twin City Fan INDUSTRIAL PROCESS AND COMMERCIAL VENTILATION SYSTEMS TURBO PRESSURE BLOWERS TBA TBR CATALOG 10 APRIL 13 TURBO PRESSURE BLOWERS Models TBA TBR TBR Arrangement 8 Model TBA and TBR fans from
More information1/12, 1/6, 1/4, 1/3, 1/2, 3/4 & 1.0 HP
Articulating Piston TAskair (TA) Series /, /6, /4, /3, /, 3/4 &.0 HP MODELS TA-0-DC (70046) TA-30-DC (7004) TA-40-DC (7005) TA-40-DC (70047) TA-50-DC (70058) TA-50E (70063) TA-50E (70064) TA-60E (70066)
More informationModel METRIC SHAFT WT (LBS) mm mm mm mm mm mm mm 572
FEATURES Computer designed, efficient performance, forward curved blower. Blower wheel hub is secured to the shaft with a locking keyway. Blower is secured to anti-vibration mounts within the cabinet.
More informationSQBI BLOWERS BACKWARD INCLINED CLASS II CLASS IIP CLASS III. OEM and Industrial Air Handling Specialist
OEM and Industrial Air Handling Specialist SQBI BLOWERS BACKWARD INCLINED CLASS II CLASS IIP CLASS III 7697 Snider Road, Mason, OH 4040-913 Telephone: 13-73-0600 Visit us at www.cincinnatifan.com for more
More informationan ISO 9001 Company Bulletin BCPF 100 NEW Design 70 PLUG FANS CHICAGO BLOWER CORPORATION GLENDALE HEIGHTS, ILLINOIS USA
an ISO 9001 Company Bulletin BCPF 100 NEW Design 70 PLUG FANS New Energy Saving Wheel Mounted Motors to 125 HP Pre-Engineered Sizes to 60" Capacities to 156,000 CFM CHICAGO BLOWER CORPORATION GLENDALE
More informationturbo pressure blowers
efining Innovation. turbo pressure blowers TYPE TBNA TBNS BULLETIN May TBN Turbo Pressure Blowers Introduction The TBN series of fans are low volume, high-pressure blowers designed for stable operation
More informationSeries
MTH PUMPS 15 25 26 17 27 Series Flexible Coupled Capacities to 15 GPM Heads to 115 Feet Low NPSH Requirements Page 1-19 15 17 25 26 27 LIMITATIONS Discharge Pressure Seal Pressure* Suction Pressure (Min.)
More informationTURNING AIR INTO SOLUTIONS. TURBO PRESSURE BLOWERS TBNA TBNS
TURNING AIR INTO SOLUTIONS. TURBO PRESSURE BLOWERS TBNA TBNS CATALOGUE M1250 April 2015 TURBO PRESSURE BLOWERS Overview TBNA I TBNS The TBN series of fans are low volume, high-pressure blowers designed
More informationARRANGEMENT 4/4F/4H/4V SINGLE-WIDTH ACOUSTAFOIL/PLR FANS
ARRANGEMENT 4/4F/4H/4V SINGLE-WIDTH ACOUSTAFOIL/PLR FANS 13 Class PLR Arr. 4 Fan, CW rotation with top angular up discharge. APPLICATIONS With three classes to choose from, the Arrangement 4/4F/4H/4V Single-Width
More informationDF / DFB / DFC DOUBLE WIDTH DOUBLE INLET FORWARD CURVED FANS
Catalog 6131 DF / DFB / DFC DOUBLE WIDTH DOUBLE INLET FORWARD CURVED FANS FOR ORIGINAL EQUIPMENT MANUFACTURES SERIES 1600 1/98 APPLICATIONS AND AVAILABLE TYPES DF - DFB - DFC DOUBLE INLET FANS DOUBLE INLET
More informationThe Industrial Choice. TURBO PRESSURE BLOWERS. Models HPBA / HPBS
The Industrial Choice. TURBO PRESSURE BLOWERS Models HPBA / HPBS CATALOG 914 February Turbo Pressure Blowers Models HPBA HPBS The HPB series of fans are low volume, high-pressure blowers designed for stable
More informationBULLETIN 912-A. February 1999 HIGH PRESSURE BLOWER. Model HPB Direct Drive/Belt Driven
BULLETIN 912-A February 1999 HIGH PRESSURE BLOWER Model HPB Direct Drive/Belt Driven Model HPB High Pressure Blowers Aerovent s High Pressure Blowers feature high static pressure capabilities from 11"
More informationNorth American Series 2300 Turbo Blowers 4-44 OSI & 55-11,500 CFM for standardized product 4-60 OSI, up to 100,000 CFM for custom product
Combustion North American Series 2300 Turbo Blowers 4-44 OSI & 55-11,500 CFM for standardized product 4-60 OSI, up to 100,000 CFM for custom product FEATURES Direct drive blowers specifically for combustion
More informationINDUSTRIAL PROCESS AND COMMERCIAL VENTILATION SYSTEMS. Twin City Fan PRESSURE BLOWERS MODEL PBW CATALOG 1260 APRIL 2015
Twin City Fan INDUSTRIAL PROCESS AND COMMERCIAL VENTILATION SYSTEMS PRESSURE BLOWERS MODEL PBW CATALOG 120 APRIL WWW.TCF.COM PRESSURE BLOWERS Overview Model PBW The PBW is designed for low flow and high
More informationMixed Flow Inline Fan, Model MFSI
Mixed Flow Inline Fan, Model MFSI TABLE OF CONTENTS 3 Introduction, Certifications & Listings 4 Features & Benefits 5 Options & Accessories 6 Dimensional Data 10 Performance Data 27 Sound Data 44 Engineering
More informationUTILITY BLOWERS. Models: BIUB / BIUBR / BIUBSH BAUB / DFC / FCUB. The Industrial Choice.
UTILITY BLOWERS Models: BIUB / BIUBR / BIUBSH BAUB / DFC / FCUB The Industrial Choice. CATALOG 760 April 2017 Utility Blowers Overview Utility Blowers Aerovent s line of utility blowers is one of the most
More informationSECTION CENTRIFUGAL HVAC FANS
SECTION 233416 - CENTRIFUGAL HVAC FANS 1. PART 1 GENERAL 1.1. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationFRP Fans: CLUB Series Performance and Technical Information
FRP Fans: CLUB Series 1500-7300 Performance and Technical Information Verantis Environmental Solutions Group provides solutions for most common and complex situations including repair, rebuilding, field
More informationSeries 50Hz Metric Edition
MTH PUMPS 1 1 17 7 Series Hz Metric Edition Capacities to 7 LPM Heads to 3 Meters Low NPSH Requirements Flex Coupled MTH 1 1 17 7 Series regenerative turbine pumps represent the most economical, high performance
More informationTURNING AIR INTO SOLUTIONS. PRESSURE BLOWERS. Model PBW
TURNING AIR INTO SOLUTIONS. PRESSURE BLOWERS Model PBW CATALOG 120 April PRESSURE BLOWERS Overview Model PBW The PBW is designed for low flow and high static pressures, yet stable operation throughout
More informationTubular Centrifugal Inline Fans Page Introduction... 2 Construction Features... 3 Specification and Dimension Data TCN-D (Inline Fan- Direct
Tubular Centrifugal Inline Fans Page Introduction........................................... 2 Construction Features.................................. 3 Specification and Dimension Data TCN-D (Inline Fan-
More informationOEM and Industrial Air Handling Specialist Snider Road, Mason, OH Telephone:
HDBI BLOWERS OEM and Industrial Air Handling Specialist BACKWARD INCLINED CLASS II CLASS III CLASS IV 797 Snider Road, Mason, OH 45040-915 Telephone: 51-57-000 Visit us at www.cincinnatifan.com for more
More informationPRODUCT OBSOLETED 1Q16
VIKING HEAVY DUTY PUMPS FEATURES Section 6 Page 6. Issue C 9 SERIES 27 s Cutaway View (Packed Type) 60-200-280 GPM Sizes (36-45-64 m³/hr) Shown without over-pressure relief valve MECHANICAL SEAL (SERIES
More informationforward curved inline duct blowers
Defining Innovation. forward curved inline duct blowers TYPE DBS (Single) DBT (Twin) BULLETIN 4220 January 2011 Duct Blowers General Information Twin City Fan s belt driven DBS (single) and DBT (twin)
More information& 12" 96" / TABD CATALOG
The Industrial Choice. Model TA Direct Drive Model TABD Belt Driven TUBEAXIAL S Macheta Airfoil Design Direct Drive & Belt Driven Sizes 2" through 96" Models TA / TABD CATALOG 5 August 204 Tubeaxial Fans
More informationTurning Air Into Solutions. PLUG FANS TYPE BCPL
Turning Air Into Solutions. PLUG FANS TYPE BCPL CATALOG 350 December 2009 BCPL Plug Fans BCPL plug fans from Twin City Fan & Blower are compact and versatile. Their versatility allows them to be used for
More informationInline and Roof Mounted Fans
CV Inline and Roof Mounted Fans Page Introduction........................................... 2 Construction Features................................. 3-4 Specifications and Dimension Data CVD (Direct Drive
More informationVERANTIS. FRP Fans: CMHB Series Performance and Technical Information. Environmental Solutions Group
VERANTIS Environmental Solutions Group FRP Fans: CMHB Series 6-8-10 Performance and Technical Information Bulletin 11-6 Rev May 2013 VERANTIS Environmental Solutions Group Verantis Environmental Solutions
More informationDefining Innovation. backward curved FANs
Defining Innovation. high efficiency industrial backward curved FANs TYPE HIB BULLETIN 00-B May 20 HIB High-Efficiency Industrial Backward-Curved Fans Model HIB fans from Twin City Fan & Blower employ
More informationBlower Specifications
Lab These charts are arranged by increasing CFM. All lab blowers are 0Hz. See the preceding Four Steps To Blower Selection. 0 to CFM to / inch Static Pressure SIZE CODES -000/00 / () 0-00 / /0-0 () 0-000
More informationPBS SERIES FABRICATED STEEL PRESSURE BLOWERS Snider Road, Mason, OH Telephone:
O d n a EM ial r t s u Ind g A lin d n a ir H t lis a i c e Sp PBS SERIES FABRICATED STEEL PRESSURE BLOWERS 69 Snider Road, Mason, OH 500-9 Telephone: 51-5-0600 Visit us at www.cincinnatifan.com for more
More information50 HERTZ METRIC BLOWER
CAPACITIES 50 HERTZ METRIC BLOWER Pressure Range 500mm 20 wc 12 osi 700mm 27 wc 16 osi 900mm 35 wc 20 osi 1100mm 43 wc 24 osi Model Number TBA 500-1.5 TBA 500-2.2 TBA 500-3 TBA 500-4 TBA 500-5.5 TBA 500-
More informationSURGE LIMITING PB FANS. Designed for high pressure, low flow applications with stringent job process requirements
SURGE LIMITING BULLETIN 485 APRIL, 2017 PB FANS Designed for high pressure, low flow applications with stringent job process requirements Capacities to 30,000 CFM Static pressures to 180 WG Temperatures
More informationITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.
ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L
More informationDPS. The SSV Dual Pump System
DPS The SSV Dual Pump System A Full Range of Product Features The DPS series of 36L stainless steel vertical multi-stage pumps from G&L has been designed to provide reliable high pressure boosting to serve
More informationBULLETIN 456. July 1997 VANEAXIAL FANS. Type W Direct Drive/Belt Driven. Model VW Direct Drive. Model VWBD Belt Driven
BULLETIN 456 July 1997 VANEAXIAL FANS Type W Direct Drive/Belt Driven Model VW Direct Drive Model VWBD Belt Driven Aerovent certifies that the Type W Vaneaxial Fans shown herein are licensed to bear the
More informationDESIGN GUIDELINES FANS PAGE 1 of 7
DESIGN GUIDELINES FANS PAGE 1 of 7 1.1. REFERENCE STANDARDS 1.1.1. Publications listed below (including amendments, addenda, revisions, supplements and errata) form a part of this specification to the
More informationVIKING SPUR GEAR SINGLE PUMPS SERIES SG-04, SG-05, SG-07 AND SGN-05, SGN-07 STANDARD CONSTRUCTION FEATURES
VIKING SPUR GEAR SINGLE PUMPS FEATURES Section 34 Page 34. SERIES SG-04 and SG-05 Pumps Cutaway View.0 to.2 GPM Sizes (.0 to 2.5 m³/hr) SERIES SG-07 Pump Cutaway View 2.8 to 32.0 GPM Sizes (. to 7 m³/hr)
More informationCENTREX INLINER Centrifugal Inline Fans
CENTREX INLINER Centrifugal Inline Fans TECHNICAL SPECIFICATIONS BULLETIN SX8 PennBarry Your Single Source for Commercial & Industrial Supply & Exhaust Fans www.pennbarry.com TABLE OF CONTENTS INTRODUCTION
More informationCPAF SERIES CENTRIFUGAL PLUG FANS CLASS II CLASS IIP CLASS III Snider Road, Mason, OH Telephone:
OEM and Industrial Air Handling Specialist SERIES CPAF CENTRIFUGAL PLUG FANS CLASS II CLASS IIP CLASS III 69 Snider Road, Mason, OH 4040-913 Telephone: 13-3-0600 Visit us at www.cincinnatifan.com for more
More informationData /1/07 Eclipse RatioAir Burners Model RA0040
Maximum input, () at neutral chamber conditions 60Hz Packaged Maximum input, () at neutral chamber conditions 50Hz Packaged Minimum input, () Lower inputs may be achieved. Contact factory. Main Gas Inlet
More informationYour Clean Air Source!
Direct Drive Your Clean Air Source! HIGH QUALITY... HIGH FFICINCY... VRSATILITY stablished in 1893, Peerless Blowers has a well established record of manufacturing a complete line of heavyduty industrial
More informationEMERGENCY SHUTOFF AND FIRESAFE VALVES FIGURE 1075
EMERGENCY SHUTOFF AND FIRESAFE VALVES FIGURE 107 The JAMESBURY brand FM (Factory Mutual) approved Emergency Shutoff and Firesafe Valves Figure 107 are manual assemblies consisting of the JAMESBURY FIRE-TITE
More information3800 Series. Single Stage End Suction Pumps. Capacities to 4200 G.P.M. (954 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (149 C)
3800 Series Single Stage End Suction Pumps Capacities to 200 G.P.M. (95 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (19 C) MODEL 380 Aurora 3800 Pump Setting New Standards of Efficiency
More informationCENTAXIAL TUBULAR CENTRIFUGAL FANS. BIA Airfoil Blade Design Direct Drive & Belt Driven Model CBD / CDD (Class I, II & III) Model CBD Belt Driven
Model CBD Belt Driven Model CDD Direct Drive CENTAXIAL TUBULAR CENTRIFUGAL FANS BIA Airfoil Blade Design Direct Drive & Belt Driven Model CBD / CDD (Class I, II & III) CATALOG 337 February 2004 Centaxial
More informationTwin City Fan & Blower
Twin City Fan & Blower VENTILATING SETS TYPE BCV (Backward Inclined) TYPE BCVU5 (UL 705 Listed) TYPE BCVU2 (UL 762 Listed) TYPE BCVSH (UL Smoke & Heat) TYPE BAV (Airfoil) TYPE FCV (Forward Curved) Ventilating
More informationZEPHYR CABINET. Single & Twin Unit Cabinet Fans. Moving Your Way BULLETIN ZC15 TABLE OF CONTENTS
ZEPHYR CABINET Single & Twin Unit Cabinet Fans Moving Your Way TABLE OF CONTENTS Introduction, Certifications & Listings, Features & Benefits 3 Options & Accessories 4 Typical Applications & Belt Drive
More informationThe Industrial Choice. Model SCDD Direct Drive. Model SCBD Belt Driven SQUARE INLINE FANS. Direct Drive & Belt Driven Model SCDD / SCBD
The Industrial Choice. Model SCDD Direct Drive Model SCBD Belt Driven SQUARE INLINE FANS Direct Drive & Belt Driven Model SCDD / SCBD BULLETIN 40 January 007 Square Inline Centrifugal Fans General Information
More informationBulletin BCF 103 DESIGN 10A BACKWARD INCLINED WHEELS
Bulletin BCF 10 DESIGN 10A BACKWARD INCLINED WHEELS Proven Reliability in Industrial Environments and Corrosive Atmospheres Design 10A s with Backward Inclined Wheels Chicago s Design 10A is a rugged multi-purpose
More informationVDBA INDOOR SINGLE & TWIN LINE DUCT BLOWERS
VDBA INDOOR SINGLE & TWIN LINE DUCT BLOWERS VDBA INDOOR SINGLE & TWIN LINE DUCT BLOWERS SECTION 11 OPTIONAL ACCESSORIES VXDAF filter sections are insulated and supplied with 1 framed aluminum mesh filter.
More informationTwin City Fan & Blower
Twin City Fan & Blower BULLETIN 370 January 2007 AIRFOIL FANS TYPE BAE SWSI and DWDI BAE SWSI and DWDI Airfoil Fans Featuring the E-Series Wheel This catalog features the new BAE airfoil wheel design.
More informationInfo 110 4/98. RatioMatic Burners. RM Series version through 600 Sizes. 750 through 2000 Sizes
Info 110 4/98 RatioMatic Burners RM Series version 1.01 50 through 600 Sizes 750 through 2000 Sizes For Ratiomatic Serial Numbers 95-5500 and Above Version 1.01 7/97 Contents 1.0 Operating Parameters &
More informationEclipse Single-Ended Radiant Tube Burners
325 Design Guide 3/8/2011 Eclipse Single-Ended Radiant Tube Burners Models SER450, SER600, & SER800 Version 5 Metallic Ceramic Copyright Copyright 2007 by Eclipse, Inc. All rights reserved worldwide. This
More informationVIKING HEAVY DUTY PUMPS SERIES 225 AND 4225 JACKETED BRACKET, STANDARD CONSTRUCTION FEATURES
VIKING HEAVY DUTY PUMPS JACKETED BRACKET, STARD CONSTRUCTION FEATURES SERIES 5 Pumps Cutaway View 5-0-60-80-5 GPM Sizes (-7--8- m³/hr) Section Page. Issue C MECHANICAL SEAL (SERIES 5) H - LL SIZES LS -
More informationThe Industrial Choice. Model VB Direct Drive. Model VBBD Belt Driven VANEAXIAL FANS. Direct Drive & Belt Driven Model VB / VBBD
The Industrial Choice. Model VB Direct Drive Model VBBD Belt Driven VANEAXIAL FANS Direct Drive & Belt Driven Model VB / VBBD BULLETIN 466 November 2000 Contents Construction Features Belt Driven... 3
More informationEclipse Vortometric Burners Series HI
Version Burner Model Parameter 6V 8V V V V 6V 8V V V 8V 3V 36V Max. Input MM BTU/hr (MW) (.8).5 (3.) 7 (5.0) 3 (6.7) 3 (9.) () (6.) 78 (3) 90 (6) 5 (37) (7) (6) Min. Input MM BTU/hr (MW) (Natural Gas)
More informationSHELDONS ENGINEERING Inc. Sheldons Engineering Product Index
SHELDONS ENGINEERING Inc. Sheldons Engineering Product Index www.sheldonsengineering.com SQUARE BODY RADIAL BLADE CENTRIFUGAL FAN D6900 GENERAL SPECIFICATION. The centrifugal fan shall be designed and
More informationMixed-Flow Blowers Page Specifications and Dimension Data Performance Data Sound Data
Mixed-Flow Blowers Page Introduction.......................................... 2-4 Standard Construction Features.......................... 5-7 Mixed-Flow Advantages.................................. 8
More informationInline Fans [ 14 ] * UL is optional and must be specified.
XTIF, XIB and XID models are listed for electrical (UL/C-UL US 705) File no. E40001. Model XTIF is available with the UL 762 Listing (Power Ventilators for Restaurant Exhaust Appliances). Accurex, LLC
More informationTURNING AIR INTO SOLUTIONS. UTILITY SETS DCV BCV BCVR BCVSH BAV DDF FCV
TURNING AIR INTO SOLUTIONS. UTILITY SETS DCV BCV BCVR BCVSH BAV DDF FCV CATALOG 600 March 2017 UTILITY SETS Model DCV Overview Utility Sets Twin City Fan s line of utility ventilating sets is one of the
More informationVIKING GENERAL PURPOSE PUMPS SERIES 32 AND 432
Page 310.1 FEATURES SERIES 32 and 432 3 GPM (.7 m³/hr) Size Shown. or Mechanical seal type. Valve on casing. SERIES 432 5 GPM (1 m³/hr) Mechanical seal type. Shown with valve on head. C, F & FH Sizes J
More informationTURNING AIR INTO SOLUTIONS. COMMERCIAL DUTY PLENUM FANS EPLFN EPLQN
TURNING AIR INTO SOLUTIONS. COMMERCIAL DUTY PLENUM FANS EPLFN EPLQN CATALOG 455 June 2014 PLENUM FANS Overview EPLFN I EPLQN Plenum fans are unhoused fans designed to operate inside of field-fabricated
More informationSquare Inline Fans with Multi-Directional Discharge
SQN Square Inline Fans with Multi-Directional Discharge Page Introduction............................................2 Standard Construction Features............................ 3 Specifications and Dimension
More information.3 Section Vibration Isolation and Seismic Control..2 ANSI/AMCA 210/ASHRAE 51 Laboratory Methods of Testing Fans for Rating.
Issued 2005/06/01 Section 15831 Commercial Fans Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal..2 Section 15053 Motors, Drives and Guards..3 Section 15072
More informationSPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
More informationBELT DRIVEN CENTRIFUGAL ROOFTOP FILTERED SUPPLY FAN
Twin City Fan INDUSTRIAL PROCESS AND COMMERCIAL VENTILATION SYSTEMS BELT DRIVEN CENTRIFUGAL ROOFTOP FILTERED SUPPLY FAN MODEL BCRFS CATALOG 4310 JUNE 2012 FILTERED SUPPLY VENTILATORS Model BCRFS Twin City
More informationVaneaxial Fans. Series 25 Series 53 Series 53C Series 54 Series 55 HARTZELL. Hartzell Fan, Inc., Piqua, Ohio
Vaneaxial Fans Series 25 Series 53 Series 53C Series 54 Series 55 BUILT WITH HONOR HARTZELL FAN, INC PIQUA, OHIO USA HARTZELL Hartzell Fan, Inc., Piqua, Ohio 45356 February 2008 Index Model Code Explanation...Page
More informationMAX-E1 FAMILY NEMA PREMIUM EFFICIENCY
MAX-E1 FAMILY NEMA PREMIUM EFFICIENCY TYPE AEHE, AEHH8N, AEHH8NCF, AEUH8NDC Effective 05-01-13 Supercedes 08-01-11 APPLICATIONS: Fans & Blowers Compressor Any Severe Duty/ Petro-Chem/ Pumps Mixers Pulp
More informationMODELS CSF & LSF BELT DRIVE CENTRIFUGAL FILTERED SUPPLY FANS
S CSF & LSF Model CSF Hooded Design FEATURES Supply air to over 13,000 CFM in static pressure capabilities to 2 w.g. Heavy-galvanized construction Belt drives permit easy performance adjustments when needed
More informationEclipse Butterfly Valves
Data 720 9/13/2010 Eclipse utterfly Valves Full Port & Reduced Port Version 2 Manual ontrol V Automatic ontrol V (Shown with Optional rank Arm) Product Description Eclipse utterfly Valves are designed
More informationFiltered Kitchen Supply Packaged Ventilator
Filtered Kitchen Supply Packaged Ventilator Page Introduction........................................... 2 Information............................................ 3 Specifications and Dimension Data KD................................................
More informationTwin City Fan & Blower
BULLETIN 600 Twin City Fan & Blower September 2009 VENTILATING SETS TYPE BCV (Backward Inclined) TYPE BCVU5 (UL 705 Listed) TYPE BCVU2 (UL 762 Listed) TYPE BCVSH (UL Smoke & Heat) TYPE BAV (Airfoil) TYPE
More informationMODEL CTB TUBULAR CENTRIFUGAL INLINE BELT DRIVEN FAN
MODEL FEATURES Rated up to 20,000 CFM in static pressure applications up to 2-1/2 w.g. Motor drives are located outside of the airstream Ideal for applications where space is limited Belt drives permit
More informationSection 8 AMERICAN. Flanged Pipe
Section 8 AMERICAN Flanged Pipe The principal standards covering Flanged Pipe are ANSI/AWWA C115/A21.15 and ANSI/AWWA C110/A21.10. These and other standards are referenced throughout this Section either
More informationTurning Air Into Solutions. CAST ALUMINUM PRESSURE BLOWERS MODEL TPD MODEL TPB
Turning Air Into Solutions. CAST ALUMINUM PRESSURE BLOWERS MODEL TPD MODEL TPB CATALOG 820 January 2013 PressureBlowers Models TPD TPB Twin City Fan & Blower s Cast Aluminum Pressure Blowers are the perfect
More informationTube Axial Fan Page Specifications & Dimension Data Performance Data
Tube Axial Fan Page Introduction........................................... 2 Construction Features................................... 3 Information........................................... 4 Specifications
More informationTwin City Fan & Blower
Twin City Fan & Blower BULLETIN 300-F January 2009 BACWARD INCLINED FANS TYPE BC SWSI & DWDI BC SWSI & DWDI Backward Inclined Fans This catalog features type BC non-overloading centrifugal fans in SWSI
More informationCOMMERCIAL DUTY PLENUM FANS
Twin City Fan INDUSTRIAL PROCESS AND COMMERCIAL VENTILATION SYSTEMS COMMERCIAL DUTY PLENUM FANS EPLFN EPLQN CATALOG 455 JUNE 2014 PLENUM FANS Overview EPLFN I EPLQN Plenum fans are unhoused fans designed
More informationR SERIES RADIAL BLADE IMPELLERS - STEELS, STAINLESS STEELS, & ALUMINUM
RAL BLADE IMPELLERS - STEELS, STAINLESS STEELS, & ALUMINUM - 10815 Commercial Street Richmond, IL 60071 815.678.4516 www.jan-air.com Materials, Finishes, and Features Standard Materials and Finishes: Steel
More informationCentrifugal Cabinet Fans Model BCF Belt Drive Low-Profile
Centrifugal Cabinet s BCF Belt Drive Low-Profile May 2007 BCF Belt Drive Cabinet s Greenheck belt drive low-profile cabinet fans, BCF, are designed for efficiency and reliability in supply, exhaust or
More informationLOW STATIC FAN COIL UNITS District Cooling Chilled Water Application
STATIC FAN COIL UNITS District Cooling Chilled Water Application CLASSIFIED INSULATION & FILTER MEDIA GFC LD Series Cooling Capacity Range 9,690 yo 46,064 BTU/HR (4 ROWS ) GFC-LD-TC-10-13 3 General Specifications
More informationCentrifugal Inline Fans Models SQ-M and BSQ-M. Direct and Belt Drive
Centrifugal Inline s Models SQ-M and BSQ-M Direct and Belt Drive July 2010 Centrifugal Inline Duct s Greenheck's model SQ-M and BSQ-M centrifugal square inline fans feature a unique combination of installation
More information