3800 Series. Single Stage End Suction Pumps. Capacities to 4200 G.P.M. (954 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (149 C)
|
|
- Cecilia Little
- 6 years ago
- Views:
Transcription
1 3800 Series Single Stage End Suction Pumps Capacities to 200 G.P.M. (95 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (19 C) MODEL 380
2 Aurora 3800 Pump Setting New Standards of Efficiency Liquid handling requirements are much more involved than they were years ago. The variety of liquids being handled has increased along with temperatures and pressures. Today s installations demand quiet, smooth running pumps with long life. Aurora Pump s 90 years of experience with design, sales and manufacturing of centrifugal pumps has lead to the 3800 Series. These modern pumps with a clean, straightforward design were developed with maximum interchangeability in mind. Aurora s highly reliable 3800 pumps offer an economical solution to your liquid handling problems. Features Offered in two models; Close Coupled Flexible Coupled-Frame Mounted 316 Stainless Steel Impeller Double volute on " discharge and larger to reduce bearing loads Gauge taps on suction and discharge on flanged models Power Frame sizes Casing feet for easy back pullout Regreasable bearings (380 only) Coupling Guard (Flex Coupled design) Formed Steel Base (Flex Coupled design) Options 316 Stainless Steel Shaft 316 Stainless Steel Shaft Sleeve Drip Rim base Drip Pan (380 only) Flush Lines Epoxy coating Several Mechanical Seal options Oil Lube Bearings (Flex Coupled Only) Case Wear Ring 2
3 3800 Pump End Only Product Offering CP 1/2 NPT CONNECTION Y 1/ NPT CONNECTION SUCTION Z DISCHARGE V X U 2.50 (13) x.75 (.19) LONG SLOTS D (66) H BOLT SIZE AD AC P1 B1 P2 B2 G E 1/2 NPT CONNECTIONS E A Pump Size Disch Suct D X Y Z P1 P2 B1 B2 G H E A AC AD CP U V Key 1.25x1.5x7S (5) SQ. x (NPT) (178) (127) (083) (11) (035) (01) (0) (067) (016) (011) (083) (203) (38) (373) (52) (022) (05) 1.38(35) LNG 1.5x2x7S (5) SQ. x (NPT) (178) (152) (079) (117) (037) (00) (062) (065) (016) (011) (083) (203) (356) (381) () (022) (05) 1.38(35) LNG 1.5x2x11S (5) SQ. x (NPT) (203) (229) (079) (16) (037) (075) (057) (095) (017) (011) (116) (279) (35) (379) (59) (022) (05) 1.38(35) LNG 1.5x2x11L (6) SQ. x (NPT) (203) (229) (079) (16) (037) (075) (057) (095) (017) (011) (116) (279) (33) (59) (573) (029) (079) 1.75(5) LNG 1.5x2x12S (5) SQ. x (NPT) (25) (197) (070) (16) (09) (056) (073) (095) (017) (011) (116) (279) (39) (375) (5) (022) (05) 1.38(35) LNG 2x2.5x7S (5) SQ. x (178) (165) (089) (005) (00) (037) (065) (062) (016) (011) (083) (203) (370) (395) (75) (022) (05) 1.38(35) LNG 2x2.5x9.5S (5) SQ. x (203) (178) (19) (00) (071) (0) (092) (017) (011) (116) (279) (379) (05) (8) (022) (05) 1.38(35) LNG 2x2.5x9.5L (6) SQ. x (203) (178) (19) (00) (071) (0) (092) (017) (011) (116) (279) (51) (76) (591) (029) (079) 1.75(5) LNG 2.5x3x7S (5) SQ. x (178) (152) (108) (005) (01) (035) (067) (0) (016) (011) (083) (203) (387) (13) (92) (022) (05) 1.38(35) LNG 2.5x3x9.5S (5) SQ. x (203) (171) (152) (01) (070) (062) (090) (017) (011) (116) (279) (38) (10) (89) (022) (05) 1.38(35) LNG 2.5x3x9.5L (6) SQ. x (203) (171) (152) (01) (070) (062) (090) (017) (011) (116) (279) (5) (79) (59) (029) (079) 1.75(5) LNG 2x3x11Su (5) SQ. x (25) (203) (10) (165) (057) (070) (082) (096) (022) (013) (178) (06) (10) (35) (51) (022) (05) 1.38(35) LNG 2x3x11Lu (6) SQ. x (25) (203) (10) (165) (057) (070) (082) (096) (022) (013) (178) (06) (86) (511) (625) (029) (079) 1.75(5) LNG S - denotes small power frame L - denotes large power frame XL - denoted extra large power frame NOTES: 1. Dimensions are approximate. 2. All dimensions are in inches (mm) and may vary +/- 1/ (6). 3. Not for construction purposes unless certified. u Available in 250#/125# Flanges Dimensions do no match Bell & Gossett. Use Extra Large power frame with impeller diameters larger than 12.5 (318) 3
4 3800 Pump End Only Product Offering Pump Size Disch Suct D X Y Z P1 P2 B1 B2 G H E A AC AD CP U V Key 2x3x13.5Lu (6) SQ. x (25) (229) (10) (18) (051) (076) (076) (022) (013) (178) (06) (89) (51) (629) (029) (079) 1.75(5) LNG 2.5x3x13.5Lu (6) SQ. x (25) (229) (152) (203) (051) (076) (076) (022) (013) (178) (06) (505) (530) (65) (029) (079) 1.75(5) LNG 3xx7S (5) SQ. x (178) (152) (105) (127) (03) (033) (068) (059) (016) (011) (083) (203) (379) (05) (8) (022) (05) 1.38(35) LNG 3xx7L (6) SQ. x (178) (152) (105) (127) (03) (033) (068) (059) (016) (011) (083) (203) (51) (76) (591) (029) (079) 1.75(5) LNG 3xx9.5S (5) SQ. x (203) (191) (121) (156) (06) (065) (068) (08) (019) (011) (116) (279) (397) (22) (502) (022) (05) 1.38(35) LNG 3xx9.5L (6) SQ. x (203) (191) (121) (156) (06) (065) (068) (08) (019) (011) (116) (279) (67) (92) (6) (029) (079) 1.75(5) LNG 3xx11Su (5) SQ. x (25) (21) (10) (187) (062) (065) (087) (091) (022) (013) (178) (06) (10) (35) (51) (022) (05) 1.38(35) LNG 3xx11Lu (6) SQ. x (25) (21) (10) (187) (062) (065) (087) (091) (022) (013) (178) (06) (86) (511) (625) (029) (079) 1.75(5) LNG 3xx13.5Lu (6) SQ. x (25) (21) (13) (203) (05) (073) (080) (098) (022) (013) (178) (06) (92) (518) (632) (029) (079) 1.75(5) LNG x5x7su (5) SQ. x (203) (191) (125) (16) (057) (05) (078) (075) (017) (011) (116) (279) (06) (32) (511) (022) (05) 1.38(35) LNG x5x7lu (6) SQ. x (203) (191) (125) (16) (057) (05) (078) (075) (017) (011) (116) (279) (76) (502) (616) (029) (079) 1.75(5) LNG x5x9.5s (5) SQ. x (25) (203) (127) (178) (08) (06) (068) (08) (019) (011) (116) (279) (03) (29) (508) (022) (05) 1.38(35) LNG x5x9.5l (6) SQ. x (25) (203) (127) (178) (08) (06) (068) (08) (019) (011) (116) (279) (73) (98) (613) (029) (079) 1.75(5) LNG x5x11su (5) SQ. x (25) (28) (11) (18) (061) (075) (091) (091) (022) (013) (178) (06) (13) (38) (518) (022) (05) 1.38(35) LNG x5x11lu (6) SQ. x (25) (28) (11) (18) (061) (075) (091) (091) (022) (013) (178) (06) (89) (51) (629) (029) (079) 1.75(5) LNG x5x13.5lu (6) SQ. x (279) (25) (152) (218) (057) (070) (083) (095) (022) (013) (178) (06) (92) (518) (632) (029) (079) 1.75(5) LNG 5x6x7Su (5) SQ. x (25) (216) (18) (159) (071) (00) (092) (0) (018) (011) (116) (279) (35) () (50) (022) (05) 1.38(35) LNG 5x6x7Lu (6) SQ. x (25) (216) (18) (159) (071) (00) (092) (0) (018) (011) (116) (279) (505) (530) (65) (029) (079) 1.75(5) LNG 5x6x9.5Su (5) SQ. x (279) (25) (152) (191) (056) (071) (081) (081) (022) (013) (178) (06) (38) (6) (53) (022) (05) 1.38(35) LNG 5x6x9.5Lu (6) SQ. x (279) (25) (152) (191) (056) (071) (081) (081) (022) (013) (178) (06) (508) (533) (68) (029) (079) 1.75(5) LNG 5x6x11Lu (6) SQ. x (279) (267) (138) (202) (066) (061) (087) (091) (022) (013) (178) (06) (89) (51) (629) (029) (079) 1.75(5) LNG 5x6x13.5Lu (6) SQ. x (305) (330) (152) (229) (106) (122) (132) (18) (025) (016) (267) (58) (505) (530) (65) (029) (079) 1.75(5) LNG 5x6x13.5XLu (16) SQ x (305) (330) (152) (229) (106) (122) (132) (18) (025) (016) (267) (58) (676) (702) (81) (0) (10).00 LNG 6x8x9.5L u (6) SQ. x (279) (267) (178) (210) (079) (08) (105) (073) (022) (013) (178) (06) (58) (573) (687) (029) (079) 1.75(5) LNG 6x8x11Lu (6) SQ. x (305) (279) (156) (215) (117) (111) (13) (137) (025) (016) (267) (58) (516) (51) (656) (029) (079) 1.75(5) LNG 6x8x13.5XLu (16) SQ x (321) (30) (165) (237) (11) (11) (10) (10) (025) (016) (267) (58) (687) (713) (852) (0) (10).00 LNG 8x10x13.5XLu (16) SQ x (381) (356) (203) (279) (11) (11) (10) (10) (025) (016) (267) (58) (721) (76) (886) (0) (10).00 LNG S - denotes small power frame L - denotes large power frame XL - denoted extra large power frame NOTES: 1. Dimensions are approximate. 2. All dimensions are in inches (mm) and may vary +/- 1/ (6). 3. Not for construction purposes unless certified. Available in 250#/125# Flanges Dimensions do no match Bell & Gossett. Use Extra Large power frame with impeller diameters larger than 12.5 (318)
5 380 Flexible Coupled Frame Mounted Product Offering C APPROX. CP HT Y SUCTION Z DISCHARGE X D HL HH DIA. HOLES (25.) HB 1.00 (25.) 1.50 (38) HA 1.50 (38) HG BASE SIZE HA HB HG HH 1 12 X (305) 2 12 X 3 12 (305) 3 12 X (305) 13 X 5 13 (330) S 15 X 8 15 (381) 6 18 X (57) 7 22 X 5 22 (559) 8 26 X 5 26 (6) 9 15 X 2 15 (381) X 2 18 (57) X 22 (559) X 26 (6) x (6) 30 (762) 3 (86) 38 (965) 5 (113) 8 (1219) 50 (1270) 5 (1372) 5 (1372) 2 (1067) 2 (1067) (152) (152) 66 (1676) 3 (76) 3 (76) 3 (76) 3.38 (86) 0.38 (10).5 (11).5 (11) *Standard Flanges 125 lb. per ANSI B16.5 **See dimension sheets for additional dimension details.** 0.63 (16) 0.63 (16) 0.63 (16) MOTOR HORSEPOWER AND FRAME DESIGNATION HORSEPOWER 30 RPM 1800 RPM 1200 RPM RATING ODP TEFC ODP TEFC ODP TEFC 1/ / T 13T 15T 15T 1-1/2 13T 13T 15T 15T 182T 182T 2 15T 15T 15T 15T 18T 18T 3 15T 182T 182T 182T 213T 213T 5 182T 18T 18T 18T 215T 215T 7-1/2 18T 213T 213T 213T 25T 25T T 215T 215T 215T 256T 256T T 25T 25T 25T 28T 28T 20 25T 256T 256T 256T 286T 286T T 28TS 28T 28T 32T 32T 30 28TS 286TS 286T 286T 326T 326T 0 286TS 32TS 32T 32T 36T 36T 50 32TS 326TS 326T 326T 365T 365T 326TS 36TS 36TS 36TS 0T 0T 75 36TS 365TS 365TS 365TS 05T 05T TS 05TS 0TS 05TS T T 125 0TS TS 05TS TS 5T 5T TS 5TS TS 5TS TS - 5TS Casing Working Pressure With 125 lb flanges: 175 psi (maximum hydrostatic test pressure of 265 psi) With 250 lb flanges: Allowable total discharge pressure is limited to 1.5 times maximum pump shut off pressure for maximum diameter at highest available speed. Maximum hydrostatic test pressure is limited by the suction flange rating times 1.5 equaling 265 psi. NOTES: 1. Dimensions are approximate. 2. Dimensions are in inches (mm) and may vary ± 1/ (6). 3. Conduit box is shown in aproximate position. Dimensions are not specified as they vary with each motor manufacturer.. Not for construction purposes unless certified. 5
6 3550 & 1770 RPM Pump Performance TOTAL DYNAMIC HEAD-FEET x2x x1.5x7 1.5x2x7 2x3x11 2x2.5x7 2x2.5x x3x7 2.5x3x9.5 3xx CAPACITY-GPM 3xx9.5 x5x7 5x6x7 x5x11 x5x RPM Enclosed Impeller TOTAL DYNAMIC HEAD-FEET x2x12 1.5x2x x 1.5x7 2x2.5x9.5 2x2.5x RPM 10 Enclosed Impeller x2x7 2x3x13.5 2x3x11 2.5x3x x3x7 x5x13.5 3xx7 3xx x 3x13.5 x5x11 3xx11 5x6x13.5 3xx9.5 x5x7 x5x9.5 5x6x7 5x6x11 5x6x9.5 CAPACITY-GPM 6x8x13.5 6x8x11 6x8x9.5 8x10x13.5 6
7 2950 & 175 RPM Pump Performance x5x xx TOTAL DYNAMIC HEAD-METERS x2x11 2x3x11 3xx11 3xx9.5 x5x11 5x6x11 2x2.5x x3x9.5 x5x9.5 5x6x x1.5x7 1.5x2x7 2x2.5x7 2.5x3x7 3xx7 x5x7 5x6x RPM Enclosed Impeller CAPACITY-CUBIC METERS PER HOUR x3x13.5 5x6x13.5 TOTAL DYNAMIC HEAD-METERS x2x12 1.5x2x11 2x2.5x9.5 2x3x11 2.5x3x9.5 3xx11 2.5x3x13.5 3xx13.5 x5x11 x5x13.5 x5x9.5 5x6x11 5x6x9.5 6x8x13.5 6x8x11 8x10x13.5 3xx9.5 6x8x x1.5x7 2x2.5x7 5 x5x7 1.5x2x7 2.5x3x73xx CAPACITY-CUBIC METERS PER HOUR 5x6x7 175 RPM Enclosed Impeller
8 Engineering Specifications 3800 Series Specifications The contractor shall furnish (and install as shown on the plans) Aurora model (3801 horizontal close coupled) (380 horizontal flexible coupled) back pull out centrifugal pump size x x of stainless fitted construction. Each pump shall have a capacity of GPM at ft of total head, with a temperature of F, specific gravity. Each pump is to be furnished with a mechanical seal with all metals parts to be 303 stainless steel with Buna-N elastomers, Ni-Resist seat, and carbon washer. The unit must be equipped with (bronze) shaft sleeve that extends the length of the seal plate. The pump shaft extension shall be gasket sealed from the pumped liquid. Impellers to be 316 SS, dynamically balanced, and key locked to the shaft. Flexible Coupled-Frame Mounted (380) Pump and motor are to be mounted on a common fabricated steel base plate. The shaft is to be steel, installed in a cast iron power frame. Pumps shall have a shaft design of.002" deflection at the seal face with the pump running under maximum load condition. Grease ball bearings, have a 3-year minimum life (AFBMA B10) under the maximum condition of load. The pump shall be flexible coupled to a standard horizontal NEMA HP phase Hertz volts RPM (open drip proof) (totally enclosed fan cooled) motor. Alignment shall be checked in accordance with the standards of the Hydraulic Institute after installation and there shall be no strain transmitted to be pumps. NOTE: Materials of Construction Pump Part Stainless Fitted Casing Cast Iron ASTM A8 Impeller 316 Stainless Steel Seal Plate/Motor Bracket Cast Iron ASTM A8 Shaft Steel AISI 1018 Sleeve Bronze ASTM B62 Power Frame (380) Cast Iron ASTM A8 (PF1, PF2, PF3 or PF21A) Mechanical Seal 303 stainless steel metal parts, Buna-N elastomer parts, Ni-Resist seat and carbon washer Design Details Power Frame Area Description A Rotation from driver end CW CW CW CW Diameter at impeller Diameter at shaft sleeve Pump Diameter between bearings Shaft Diameter at coupling end Coupling key square Max. deflection at seal face Bearing (inboard radial) 206K 308K 310K 313 Bearing (outboard thrust) 206KG 308KG 310KG 5313 Ball Bearing centers Bearings Bearing type Ball Ball Ball Ball Min B10 bearing life under maximum load 3 years 3 years 3 years 3 years Sleeve Outside diameter of sleeve Aurora Pump reserves the right to make revisions to its products and their specifications, and to this bulletin and related information, without notice. 800 Airport Road North Aurora, Illinois 52 Phone: Fairbanks Avenue Kansas City, Kansas Phone: Myers Parkway Ashland, Ohio 805 Phone: Florida Boulevard Denham Springs, Louisiana Phone: A / Pentair Pump Group, Inc.
3340 Series Single Stage End Suction Pumps
3340 Series Single Stage End Suction Pumps Bulletin 3340/Rev. A Model 3344 Aurora 3340 Pump Setting New Standards of Efficiency Liquid handling requirements are much more involved than they were five years
More information3312 Model. pumping Model Model AURORA Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS
3312 Model pumping 3314 Model 3311 Model AURORA 3310 Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS WWW.AURORAPUMP.COM AURORA 3310 Series Horizontal and Vertical Close-Coupled Pumps Capacities to 3800
More informationBulletin BX-512H. Bell & Gossett. Series HSC-S Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Programs
Bulletin BX-1H Bell & Gossett Series HSC-S Pumps Technical Bulletin Part of the Bell & Gossett Equipment Selection Programs TABLE OF CONTENTS Useful Pump Formulas...............................................
More informationModel 133 Models 134 & 135 AURORA 130 SERIES SINGLE STAGE TURBINE TYPE PUMPS
Model Models 4 & AURORA 0 SERIES SINGLE STAGE TURBINE TYPE PUMPS WWW.AURORAPUMP.COM AURORA 0 SERIES Single Stage Turbine Type Pumps Capacities to 0 G.P.M. Heads to 700 Ft. Temperatures to F A Pioneer in
More informationVSC /VSCS Pumps Technical Brochure
VSC /VSCS Pumps Technical Brochure BX-4C VSC/VSCS Construction Materials STANDARD SEAL CONFIGURATION PART NAME STANDARD CONSTRUCTION ASTM NO. Casing Cast iron A159 Class G0 Volute cover plate (Outboard)
More informationBulletin BX-420C Bell & Gossett. VSC /VSCS Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Program
Bulletin BX-4C Bell & Gossett VSC /VSCS Pumps Technical Bulletin Part of the Bell & Gossett Equipment Selection Program VSC/VSCS Construction Materials STANDARD SEAL CONFIGURATION PART NAME STANDARD CONSTRUCTION
More informationAURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS
AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES Model 3550 ASME/ANSI B73.1 Industrial Process Pumps Capacities to GPM
More informationD51 D61 D71 D91 Series
MTH PUMPS D51 D61 D71 D91 Series Page D-1 Capacities to 24 GPM Heads to 36 Feet Horizontal Close Coupled Close-coupled centrifugal pumps from MTH provide economical performance up to 24 GPM applications
More informationTECHNICAL BROCHURE B36/ /3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS
TECHNICAL BROCHURE B36/3742 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and bedplates
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More informationTECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS
TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and
More informationModel 3550 ASME/ANSI B73.1M Industrial Process Pumps
3500 Series Model 3550 ASME/ANSI B73.1M Industrial Process Pumps The Aurora Model 3550 was designed to perform in the toughest industrial applications whether in the chemical, petro-chemical, mining, pulp
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
More informationIndex - Section 14 End Suction Pump Semi-Open Impeller
Index - Section End Suction Pump Semi-Open Impeller ITEM S Product Numbering System...1 Typical Architects / Engineers Specifi cations - Series 4000...2 Seal Application...3-4 Technical Charts...5-6 Pump
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
More informationSeries HSC-S Pumps Technical Brochure
Series HSCS Pumps Technical Brochure BX512L Table of Contents Useful Pump Formulas 2 60 Cycle Performance Curves Series HSCS 3 50 Cycle Performance Curves Series HSCS 4 Series HSCS Materials of Construction
More informationAURORA Series MODEL 3560 ASME/ANSI B73.1M INDUSTRIAL PROCESS PUMPS
AURORA 3500 Series MODEL 3560 ASME/ANSI B73.M INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM AURORA 3500 Series Model 3560 ASME/ANSI B73.M Industrial Process Pumps Capacities to 7000 GPM (590 m 3 /hr) Heads
More informationG&L Pumps. TECHNICAL Brochure BAC8100. Series A-C 8100 SPLIT CASE PUMPS
TECHNICAL Brochure BAC8 Series A-C 8 SPLIT CASE PUMPS TABLE OF CONTENTS Useful Pump Formulas 2 Performance Curves 3-5 Materials of Construction (Standard) 6 Materials of Construction (Optional) 7 Pump
More informationSUGGESTED SPECIFICATIONS Pump Frames NS3 thru OMC5
SOLIDS-HANDLING WASTEWATER PUMPS Pump Frames NS3 thru OMC5 GENERAL Furnish and install Vertical Closed-Shaft Wet-Pit Pumping Units complete with all accessories and appurtenances as shown in the plans
More informationCentrifugal End Suction Fire Pumps
Centrifugal End Suction Fire Pumps 1 Centrifugal End Suction Fire Pumps Product Overview American-Marsh Model FP-REF End Suction pumps are used in a variety of fire protection services every day. These
More informationITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.
ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L
More informationM50 L50 Series Multistage Regenerative Turbine Pumps
Page M- MTH PUMPS M L Series Multistage Regenerative Turbine Pumps Capacities to 4 GPM Heads to Feet Single or Multi-stage Units (up to stages) Vertical Close Coupled Horizontal Close Coupled Horizontal
More informationSERIES: WG6-2 SELF-PRIMING CENTRIFUGAL PUMPS
420 Third Street Piqua, Ohio 436-0603 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WG6-2 SECTION 4A PAGE ISSUED 2/03 REPLACES 2/0 SELF-PRIMING CENTRIFUGAL PUMPS 300RPM -
More informationRegenerative Turbine Pumps
Bulletin E4 November 009 E4 T4 Series Regenerative Turbine Pumps Capacities to GPM Heads to 600 Feet Temperatures to 00 F MTH PUMPS MTH E4 T4 Series Close-coupled and pedestal mounted regenerative turbine
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA3 RA2 DEAN PUMP SERIES RA FAN COOLED HIGH TEMPERATURE HOT OIL PUMPS No Liquid Cooling Required
More information4500C Series Vortex Pumps
Section 009 Page 003 4500C Series Vortex Pumps Table of Contents 4500C Performance 2" x 2" - 4523C, Multiple Speed... 004 3" x 3" - 4523C, Multiple Speed... 004 4" x 4" - 4522C, Multiple Speed... 005 4"
More informationRegenerative Turbine Pumps
Bulletin M M Series Regenerative Turbine Pumps Capacities to 8 GPM Heads to Feet MTH M Series Vertical base mount and horizontal pedestal mounted multi-stage regenerative turbine pumps represent the most
More informationGH General Horizontal, Close Coupled and Frame Mounted Pumps
GH General Horizontal, Close Coupled and Frame Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The GH Series is Carver s horizontal, end suction pump for handling
More informationNC State University Design and Construction Guidelines Division 23 Hydronic Pumps
1.0 Purpose A. The following guidelines apply to the selection of pumps primarily for circulating water. It is the goal of NC State to purchase pumps that are selected to provide a long service life, minimal
More informationFE Frame-Mounted End Suction Pumps. Leading The Flow. TACO.
FE Frame-Mounted End Suction Pumps Leading The Flow. TACO. Quiet, dependable power and proven performance. FE Series Pumps meet the latest standards for hydraulic performance and dimensional characteristics.
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA296 RA3146 RA3186 RA296 The smaller, foot mounted economy version of the air-cooled RA series
More informationEN. 850 Filtrate Pumps. Technical Specification Pages
850 17.01.EN 850 Filtrate Pumps Technical Specification Pages 850 Series Filtrate Pump 850 17.01.EN This page left intentionally blank. 1.0 Overview. The 850 is Carver s filtrate pump line designed for
More informationITT. Goulds Pumps G&L Series NPO. Engineered for life. Commercial Water. Open Impeller All Stainless Steel End Suction Pumps.
ITT Goulds Pumps G&L Series NPO Open Impeller All Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features NPO Product Line Numbering System Superior Materials
More informationSeries 1510 Centrifugal Pumps
Series 1 Centrifugal Pumps B-207H Table of Contents Useful Pump Formulas... 2 Standard Features... 3 Technical Data... Materials of Construction... Selection Charts... 6 Performance Curves... 7 Centrifugal
More informationProduct Numbering System Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC Pump Assembly, Types AC & AE
Index Sheet ITEM S Bulletin Product Numbering System... 1 Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC... 2 Pump Assembly, Types AC & AE... 3-4 Dimensions, Types AC & AE... 5-8 Selection Curves,
More informationRegenerative Turbine Pumps
Bulletin T June 04 T E Series Regenerative Turbine Pumps Capacities to 40 GPM Heads to 700 Feet Temperatures to 00 F MTH PUMPS MTH T E Series Close-coupled and pedestal mounted regenerative turbine pumps
More informationRegenerative Turbine Pumps
Bulletin E4 July E4/T4 Series Regenerative Turbine Pumps Capacities to GPM Heads to 6 Feet Temperatures to F MTH E4/T4 Series Close-coupled and pedestal mounted regenerative turbine pumps represent the
More informationSeries: GA6-1½, GA6-2, GA7-1¼, GA7-1½
Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½ 1750 RPM - 60Hz. CAPACITIES TO 160 GPM (10 LPS) HEADS TO 57 FEET (17.3 M) 1450 RPM - 50Hz. CAPACITIES TO 140 GPM (8.8 LPS) HEADS TO 40 FEET (12 M) Individual performance
More informationHigh Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167
More informationJOCKEY PUMPS MTH Tool Co. Series T41, T51, 150, 160 Regenerative Turbine Vane Type. TYPICAL SPECIFICATION MTH Tool Co. Series T41, T51 Pumps
Peerless Pump Company Indianapolis, IN 46206-7026 JOCKEY PUMPS MTH Tool Co. Series T41, T51, 150, 160 Regenerative Turbine Vane Type SECTION 1720 Page 1 August 10, 1992 TYPICAL SPECIFICATION MTH Tool Co.
More informationCE Close-Coupled End Suction Pumps. Leading The Flow. TACO.
CE Close-Coupled End Suction Pumps Leading The Flow. TACO. Quiet, dependable power and proven performance. CE Series Pumps meet the latest standards for hydraulic performance and dimensional characteristics.
More informationTECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN. PrimeLine SP SPM & SPH SERIES
TECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN PrimeLine SP SPM & SPH SERIES FEATURES Self Priming Design: Features a replaceable check valve which acts to retain sufficient liquid in the casing
More informationSUGGESTED SPECIFICATIONS
PART 1 - GENERAL 1.01 SCOPE A. Pumps to be supplied under this specification shall be of a severe duty, recessed cupped impeller design suitable for use in (SLUDGE, GRIT, ETC. APPLICATIONS) with a 20 year
More information390 Series Multi-Stage Vertical In-Line Centrifugal Pumps
Bulletin 390 /Rev. B 390 Series Multi-Stage Vertical In-Line Centrifugal Pumps Capacities to 400 G.P.M. (91 M 3 /HR) Heads to 800 Feet (243 Meters) Temperatures to 250 F (120 C) motralec 4 rue Lavoisier.
More informationGoulds Small Capacity Double Suction Pump
Goulds 3410 Small Capacity Double Suction Pump 3410 Double Suction Pumps Designed for a Wide Range of Industrial, Municipal, Capacities to 7,000 GPM (1591 m3/h) Heads to 550 feet (168 m) Temperatures to
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES G5--/4 G6--/4 SECTION B PAGE ISSUED /0 REPLACES /0 CLOSED COUPLED CENTRIFUGAL PUMPS 500RPM
More informationBulletin D51 September D51 D61 D71 D91 Series. Centrifugal Pumps. Capacities to 240 GPM Heads to 360 Feet MTH PUMPS
ulletin D1 September 006 D1 D61 D71 D91 Series Centrifugal Pumps Capacities to 0 GPM Heads to 60 eet MTH PUMPS Casing Standard casing construction of all units is ASTM A8 Class 0 cast iron. All bronze
More informationSelf-Priming Fiberglass Pumps
Fybroc Division SERIES 16 Self-Priming Fiberglass Pumps B U L L E T I N 16B1 FYBROC THE LEADER IN CORROSION-RESISTANT FIBERGLASS PUMPING EQUIPMENT Fybroc is the leading manufacturer of fiberglass reinforced
More informationBulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support
Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135
More informationCURVES B-194. Series e-60 MAINTENANCE FREE IN-LINE MOUNTED CENTRIFUGAL PUMPS PERFORMANCE CURVES
CURVES B-194 MAINTENANCE FREE IN-LINE MOUNTED CENTRIFUGAL PUMPS PERFORMANCE CURVES TABLE OF CONTENTS Useful Pump Formulas..................................................................... 2 Stock Pump
More informationSeries: GA6-1½, GA6-2, GA7-1¼, GA7-1½
Series: GA6-1½, GA6-2, Features FOUR POSITION CASING Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates
More informationRegenerative Turbine Pumps
Bulletin 40 October 008 40 40 80 80 Series Regenerative Turbine Pumps Capacities to 60 GPM Heads to 800 Feet MTH PUMPS 40 40 80 80 Series regenerative turbine pumps represent the most economical, high
More informationHORIZONTAL SPLIT CASE SINGLE STAGE DOUBLE SUCTION Type AE CHECKING LIST
Section Tab 1200 SINGLE STAGE DOUBLE SUCTION Section 1210 List Prices Removed 07-01-02 Use Rapid Section 1220 Data Page 0.1 & (Blank)(03-30-07) 1 & 2 (03-30-07) 2.1 & 2.2 (03-30-07) 2.21 & 2.22 (03-30-07)
More informationEFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:
Contents Section Page Model Designation 2 Features 3 Standard Specifications 5 Specifications 6 Selection Chart 7 Suction Speed Flow Chart 9 Performance Curves 10 Dimension Drawings 20 Model Designation
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
More informationRS Multi-Stage, Ring Section Pumps
RS Multi-Stage, Ring Section Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The RS Series is Carver s multi-stage pump for fluids at moderate to high pressures. The
More informationASME END SUCTION PUMPS Catalogue K-90
ASME END SUCTION PUMPS Catalogue K-90 ASME B3.1-01 ISO 9001:008 REGISTERED COMPANY Engineered Pumps for Industrial and Municipal Services ASME B3.1 / ANSI END SUCTION PUMPS This catalogue provides the
More informationTECHNICAL BROCHURE B45-70HB R2 45HB, 70HB HIGH PRESSURE CENTRIFUGAL BOOSTER PUMP
TECHNICAL BROCHURE B45-7HB R2 45HB, 7HB HIGH PRESSURE CENTRIFUGAL BOOSTER PUMP FEATURES Multi-Stage Design: This configuration provides a steady, quiet and vibration-free operation for years of trouble-free
More informationOne & Two Stage Turbine Type Pumps
0A Series APO One & Two Stage Turbine Type Pumps apacities to 0 GPM Heads to 700 Feet Temperatures to 7 F Standard Bronze fitted construction Hydraulically balanced bronze impeller Right- or left-hand
More informationbarmesapumps.com WHAT IS AN ANSI PUMP
WHAT IS AN ANSI PUMP In 1977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition of the materials and safety specifications,
More information900 Series Split Case Fire Pump Systems
BULLETIN 900/REV. E 900 Series Split Case Fire Pump Systems MODEL 481 MODEL 483 FM Approved U L Listed motralec 4 rue Lavoisier. ZA Lavoisier. 95223 HERBLAY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48
More informationCENTRIFUGAL PUMPS CLOSE-COUPLED 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; hydraulically balanced for reduced
More informationCLARK SOLUTIONS S Series Rotary Gear Pump Pressure to 200 PSI, Flow to 32 GPM, Drive Speed to 1800 RPM
CLARK SOLUTIONS S Series Rotary Gear Pump Pressure to 200 PSI, Flow to 32 GPM, Drive Speed to 1800 RPM DESCRIPTION Series S pumps are general purpose positive displacement gear pumps and are a good choice
More information855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
More informationSECTION PUMPS GENERAL PUMPS PART RELATED DOCUMENTS
SECTION 15160 - PUMPS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Basic Requirements: Provisions of Section 15010, BASIC MECHANICAL REQUIREMENTS and Section 15030, ELECTRICAL REQUIREMENTS FOR MECHANICAL
More informationTrash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service
Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service WIDE RANGE OF APPLICATIONS: Liquids Entrained with Solids General Industrial, Pulp & Paper,
More information5GB, 7GB, 10GB, 18GB, 25GB, 33GB
B-33GB GB, 7GB, GB, 18GB, 2GB, 33GB High Pressure Multi-Stage Booster Pump FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. Optional Stainless Steel Construction: Standard
More informationITT. Goulds Pumps. 5GB, 7GB, 10GB, 18GB, 25GB, 33GB High Pressure Multi-Stage Booster Pump. Engineered for life. Residential Water Systems FEATURES
Goulds Pumps GB, 7GB, 1GB, 18GB, 2GB, 33GB High Pressure Multi-Stage Booster Pump FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. Optional Stainless Steel Construction:
More informationBulletin C Dean Pump Division. ANSI/ASME B73.1 Horizontal Process. ph2140 Telescoping Guard. ph2140 C-Face Adapter
Bulletin C 1.2.34.5 Dean Pump Division ANSI/ASME B73.1 Horizontal Process ph2140 Telescoping Guard ph2140 C-Face Adapter Dean Pump Series ph Centrifugal Process Pumps Capacities to 3200 GPM (726 m 3 /hr)
More informationSeries: GNA5-1-1/4, GNA6-1-1/4
1750 RPM - 60Hz. CAPACITIES TO 40 GPM (2.5 LPS) HEADS TO 0 FEET (9 m) USA: (97) 778-8947 Canada: (905) 457-622 International: (97) 615-598 1 500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 15 FEET
More informationSUBMITTAL DATA WATER PRESSURE BOOSTER SYSTEMS
WATER PRESSURE BOOSTER SYSTEMS Model WPB-100-40TT APPLICATION Applications include commercial, industrial and other installations requiring a boost in water pressure. The NECO Water Pressure Booster System
More informationAURORA MODEL 410 SERIES ENGINEERING DATA MECHANICAL SEALS AND PACKING
AURORA MODEL 410 SERIES MECHANICAL SEALS AND PACKING Section 410 Page 71 Supersedes Section 410 Page 71 1 PACKING WITH OPTIONAL LANTERN RING SINGLE INSIDE UNBALANCED 3 SINGLE INSIDE BALANCED TAP OPTIONALLY
More informationITT. AC Series 8300 Split Case Pumps. A-C Pump. Commercial Water. A-C Pump is a brand of ITT Corporation. Engineered for life
AC Series 83 Split Case Pumps is a brand of ITT Corporation. Engineered for life Engineering Specification for AC Series 83 base mounted double suction pumps Double Suction, Horizontal Split Case Pumps
More informationTaco CI Series End Suction, Base Mounted Pumps
Taco CI Series End Suction, Base Mounted Pumps Taco CI Series Pumps are similar to the Bell & Gossett 1531 series of base mounted pumps. Used in commercial, industrial and institutional applications where
More informationUniversity of Houston Master Construction Specifications Insert Project Name
SECTION 23 30 00 - HVAC PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Division 1, "General Requirements", and Section 23 01 00, "Mechanical
More informationAxially Split Case Pumps
Axially Split Case Pumps A-C Pump A-C SPL Standard Design Features for a Wide Range of Heavy Duty In STUFFING BOX Packing is standard on the A-C products. A wide variety of mechanical seals, including
More informationSeries: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M)
Series: G5-1¼, G6-1¼ 3500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) 900 RPM - 50Hz. CAPACITIES TO 68 GPM (4.3 LPS) HEADS TO 9 FEET (8 M) USA: (937) 778-8947 Canada: (905) 457-63
More informationRSV Series In-Line Vertical Multi-Stage, Ring Section Pump September 2013
1.0 Overview. The RSV series is Carver s multi-stage pump for water with maximum working pressures below 440 PSI. For other clean liquids please contact Carver Pump Company or your local distributor. The
More informationSeries 8SHDU. Specifications: Series: 8SHDU 25-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3.50" Spherical Solids Handling
www.cranepumps.com Series 8SHDU 21 Frame Driver Specifications: DISCHARGE... 8", 125 lb. Horizontal Flange Slotted to accommodate 200mm ISO Flanges LIQUID TEMPERATURE... 4 F (40 C) Continuous VOLUTE...
More informationRegenerative Turbine Pumps
Bulletin 0 0 2 0 2 170 270 Series Regenerative Turbine Pumps Capacities to 0 GPM Heads to Feet MTH PUMPS 0 2 0 2 170 270 Series Regenerative Turbine Pump MTH 0 2 0 2 170 270 Series regenerative turbine
More informationKW Submersible, Single-Vane Impeller
Sewage Pumps KW Submersible, Single-Vane Impeller Performance Curve Total Head (FT) Up to 2 Solids-Handling Heavy-Duty, Silicon Carbide Seals Stainless Steel Keyed Shaft Flows to 325 GPM / Heads to 95
More information900 Series. 2000/2500 GPM High Head. Expanding our line to meet your needs. Model Latest Addition to the Aurora Fire Pump Line
Latest ddition to the urora Fire Pump Line 9 Series /2 GPM High Head Model FLOWS@PESSUES GPM 11-214 PSI 2 GPM 115-215 PSI SPEEDS Diesel Electric PM 148 PM 17 PM 177 PM Max case working pressure 3 PSI Expanding
More informationSeries 6XSHD. Specifications: Series: 6XSHD 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3" Spherical Solids Handling
www.cranepumps.com Series 6XSHD 21 Frame Driver Specifications: DISCHARGE... 6", 125 lb. Horizontal Flange Slotted to accommodate 150mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE...
More informationTECHNICAL BROCHURE B5-33GB R4 5GB, 7GB, 10GB, 18GB, 25GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP
TECHNICAL BROCHURE B-33GB R4 GB, 7GB, GB, 1GB, 2GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. applications. O-Ring Casing
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over years for various industrial, commercial and agricultural uses and has long been a leader
More informationRS Series Multi-stage, Ring Section Pump For Pressures to 1,500 PSI
RS Series Multi-stage, Ring Section Pump For Pressures to 1,500 PSI The RS Series The RS is our new process duty, horizontal ring section multi-stage pump. Designed for moderate to high pressure pumping,
More informationSeries: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M)
Series: G5-1¼, G6-1¼ C A L L 1-866 -670-0533 O R D E R O N L IN E www.burkspumpcatalog.com 3500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) 2900 RPM - 50Hz. CAPACITIES TO 68 GPM (4.3
More informationDARTMOUTH COLLEGE DESIGN February 15, 2006 & CONSTRUCTION GUIDELINES
PART 1 - DESIGN DIRECTIVES 1.1 SUMMARY SECTION 15160 PUMPS A. Related Sections: The following sections contain requirements that relate to this section: 1. DC Standards ELECTRICAL REQUIREMENTS FOR MECHANICAL
More informationSeries 4XSHM 18 Frame Driver 3" Spherical Solids Handling
Series 4XSHM 18 Frame Driver Specifications: DISCHARGE... 4, 125 lb. Horizontal Flange Slotted to accomodate 100mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48,
More informationSERIES CS CLOSE COUPLED TURBINE PUMPS
PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 8 0 6 7 8 MAXIMUM HEAD
More informationSERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 45356-0603 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WT SECTION 4C PAGE ISSUED /04 REPLACES /03 SELF-PRIMING CENTRIFUGAL PUMPS For Water and
More informationSeries 4XSHD. Specifications: Series: 4XSHD 3-10HP, 1750RPM, 60Hz. 18 Frame Driver 3" Spherical Solids Handling
www.cranepumps.com Series 4XSHD 18 Frame Driver Specifications: DISCHARGE... 4, 125 lb. Horizontal Flange Slotted to accommodate 100mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE...
More informationCP-506B-PL. Series HSCS. Horizontal Split Case Pumps. Replacement Parts
Series HSCS Horizontal Split Case Pumps Replacement Parts PARTS List CP-506B-PL PARTS LIST CP-505-PL Index Description Page No. Exploded View....3 Parts List for 6x10x22, 8x12x22M, 8x12x22L, 8x12x27, and
More informationDPS. The SSV Dual Pump System
DPS The SSV Dual Pump System A Full Range of Product Features The DPS series of 36L stainless steel vertical multi-stage pumps from G&L has been designed to provide reliable high pressure boosting to serve
More informationHigh Capacity Centrifugal & Sprinkler Pumps
High Capacity Centrifugal & Sprinkler Pumps FW0724 1016 Supersedes 0212 Stainless steel or cast iron construction Stainless steel impellers Discharge rotates in 90 increments on some models Pressures to
More information100H, 150H, 225H, 275H
TECHNICAL BROCHURE B1-275H 1H, 15H, 2H, 275H 6 HZ HIGH CAPACITY 6" SUBMERSIBLE PUMPS FOR 6" AND LARGER WELLS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the
More informationPWD. PWD API 610 BB1 Single Stage Pump
PWD PWD API 610 BB1 Single Stage Pump HYDRAULIC PERFORMANCE COVERAGE FLOW (m 3 /h) 50 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain
More informationHead - m. Flow - US gpm. Comments. Customer : Contact : Re Cotizacion Metro Linea 4 EDB Project : Quote No. :
Customer : Project : Re Cotizacion Metro Linea 4 Page No : 3 Contact : Phone : Fax : Type: PVF - In-Line Close Coupled Fire Item : RCI Electrica Pump Model: Nom. Speed: 2950 RPM, 50 Hz Electric Impeller
More informationPROCESS PUMPS MODEL V200 ANSI B73.2
EAGLE PROCESS PUMPS V200 ANSI B73.2 POWER END Shaft Diameters Bearings Stuffing Box PUMP END Maximum Diameter Solids Minimum Casing Thickness Casing Corrosion Allowance Working Pressure Test Pressure
More information2CDU70/206-2HP 2CDU70/306-3HP CDU120/306-3HP 2CDU200/506-5HP 607
Model CDX/CDU Contents CDX/CDU Item No. Specifications Selection Performance Pump Sectional Motor Chart Curve Dimensions View Data CDXU70/06-HP CDXU70/6-HP 5 6 8 6 CDXU0/6-HP CDXU00/6-5HP 7 CDU70/06-HP
More information