Introducing DV50 Sash Reinforcement Insert for use with DV23, DV26, DV28 and DV29. DV50 will be available to order from 1 st September 2017.

Transcription

1 Bulletin ***Updates to Technical Manuals*** Alitherm 300: Section C: Various pages showed ACET012 cleats which have been changed to ACET316 cleat. Alitherm 800: Section A & C: Various pages showed ACET044 chevron which have been changed to ACET311. Alitherm Heritage: Sections B, C & E: Pages B.27, E.25 & E.29 added left and right details for AC Pages C.67 & C.81 amended handle details. Visofold 6000 Section E: Pages 12 & 37 updated lock preparation details. A copy of the updated details are included attached. These manuals can be downloaded from To request a hard copy please support@smartsystems.co.uk. ***Visofold 1000 New Price Offer on DV17, DV28 & DV29*** e are pleased to advise that in addition to new pricing for DV14, DV23 & DV26, from 24 th July 2017 we will also be including DV17, DV28 & D29 in this offer. The attached bulletin contains the new pricing for single and stillage pack quantities and supersedes pricing information contained in the Commercial Aluminium Price List Edition Please add this page to your price list index pages. ***Visofold 1000 Important Fabrication Instructions*** Introducing DV50 Sash Reinforcement Insert for use with DV23, DV26, DV28 and DV29. DV50 will be available to order from 1 st September ***ACVG542 Low Friction Gasket is changing to black only*** Please note: ACVG542 which is currently supplied grey, will now be supplied as black only. The new stock is ACVG542 is made using a new cellular mix which improves sliding performance and therefore reduces the sliding force required. ***Alitherm Heritage Technical manual pages E03-E04*** Please be advised that the crimping details of have been updated. Full technical details can be found on the attached bulletin. Please use these pages to replace those in your Alitherm Heritage technical manual. ***Alitherm Important Fabrication Instructions*** e are pleased to introduce a new product, ACET495, 2no M5 x 12 S/S CSK Machine Screws, for use with espag handles ACET460 & ACET495. *** Visoglide Plus Fabrication Update*** ACS827 & ACS830 'T' Handles are to be used on internal sash only. Continued SMART SYSTEMS LTD ARNOLDS AY YATTON NORTH SOMERSET BS49 4QN T: F: E: sales@smartsystems.co.uk :

2 Bulletin ***Update to New Handle Range bulletin - page 3*** Please note the following advisory had been updated: ACET463 & ACET464 are spindle handles and require the correct adaptors, Fapim: ACFA212, SB Chrono: ACS905. ***Updated Price List Products*** The attached price list bulletin contains items that have been updated since the released of the current edition. The pricing is effective immediately and supersedes pricing contained in the Commercial Aluminium Price List Edition If you have any queries regarding any of the items included in this bulletin please contact the Technical Department on SMART SYSTEMS LTD ARNOLDS AY YATTON NORTH SOMERSET BS49 4QN T: F: E: sales@smartsystems.co.uk :

3 VISOFOLD 1000 SPECIAL OFFER HAT IS THE OFFER? In addition to new pricing for DV14, DV23 & DV26, from 24 th July 2017 we will also be including DV17, DV28 & DV29 in this offer. This supersedes pricing information contained in the Commercial Aluminium Price List Edition NE PRICE OFFER DV14 HP M EA STILLAGE (ST60) 6, DOUBLE STILLAGE (ST120) 11, DV17 HP M EA STILLAGE (ST75) 9, DOUBLE STILLAGE (ST150) 15, CONDITIONS: 15 working day lead time Access to a forklift for unloading is required Available to order through online ordering only DV23 HP M EA STILLAGE (ST60) 7, DOUBLE STILLAGE (ST120) 13, DV26 HP M EA STILLAGE (ST60) 6, DOUBLE STILLAGE (ST120) 13, DV28 HP M EA STILLAGE PACK (ST60) 7, DOUBLE STILLAGE (ST120) 12, DV29 HP M EA STILLAGE (ST60) 7, DOUBLE STILLAGE (ST120) 12, HO TO ORDER: Stillage packs can only be ordered via Smart Online Ordering Profile is ordered by stillage pack, e.g.: Item Unit You will receive: DV23/005/ST x 60 unit stillage of DV23 DV23/005/ST x 60 unit stillage of DV23 (120 bars total) COMMERCIAL ALUMINIUM PRICE LIST Page 1 EDITION UPDATE

4 ACCESSORIES ACET495 M5 X 12 CSK HD SCRE - 2 Alitherm Series ACET495 UNIT STOCK FINISH STANDARD COLOUR SPECIAL COLOUR ACINSSH16 16IN S/H STAY - PAIR UNIT STOCK FINISH STANDARD COLOUR SPECIAL COLOUR PAIR ACS mm lock UNIT STOCK FINISH STANDARD COLOUR SPECIAL COLOUR EA COMMERCIAL ALUMINIUM PRICE LIST EDITION *Painted Accessories* Page 1 of 1 Drawings not to scale

5 Alitherm ACET495 Bulletin Important Fabrication Instruction: Introducing ACET495, 2no M5 x 12 S/S CSK Machine Screws, used with Espag Handles ACET460 & ACET495. To be ordered separately. Image Part Code Pack Unit Application New ACET495 1 pack contains: 2no M5 x 12 S/S CSK Machine Screw 1 pack ACET460 ACET465 ACET460 ACET495 MAY 2017

6 Visoglide Plus ACS827 & ACS830 Bulletin Important Fabrication Instruction: ACS827 & ACS830 'T' Handles are to be used on internal sash only. Image Part Code Pack Unit Application ACS827 Internal 'T' handle with short backplate. 1 each ACS007 ACS008 ACS009 ACS010 ACS830 Internal 'T' handle with cylinder cover. 1 each ACS007 ACS008 ACS009 ACS ACS827 or ACS830 Inside Outside MAY 2017

7 Visoglide Plus Bulletin Important Fabrication Instruction: ACVG542 is now supplied in black only. Image Part Code Pack Unit Application New ACVG m 1 VG520 VG521N May / 2017

8 Visofold 1000 Bulletin Important Fabrication Instruction: Introducing DV50 Sash Reinforcement Insert used in DV23, DV26, DV28 and DV DV50 DV50 ACET070 Fixed 100mm from each end & at 500mm centres ACET ACET ACDV272 Number Perim. mm Mec. mm lx(cm4) ly(cm4) wx(cm3) wy(cm3) Length Pack pr. SA HP M DV *** ithout DV50 1 x DV50 External 1 x DV50 Internal 2 x DV50 Number lx(cm4) ly(cm4) wx(cm3) wy(cm3) lx(cm4) ly(cm4) wx(cm3) wy(cm3) lx(cm4) ly(cm4) wx(cm3) wy(cm3) lx(cm4) ly(cm4) wx(cm3) wy(cm3) H H DV50 DV23/6/8/9 Scale 2:1 DV23 DV ACDV23 DV23/6/8/9 DV50 DV28 DV H April 2017

9 Alitherm Heritage CONSTRUCTION DRAINGS Corner Joint Details Notes 1. Degrease mitre sections 2. Cover mitred faces with ACSIL04 3. Apply ACSIL013 to cleat chamber 4. Apply ACSIL04 to any fractures formed by crimping to make watertight Table 1 Colour Black hite Clear Sealant Part Number ACSIL04BL ACSIL04P ACSIL04CL ACSIL04001 ACSIL04002 ACSIL04003 ACSIL04004 ACSIL04005 ACSIL04006 ACSIL04007 ACSIL04010 ACSIL04011 ACSIL04012 ACSIL04013 AC20160 (20015 & only) Corner Chevron Corner Cleat ACSIL04 Apply Glue (ACSIL013) to all Cleat Apertures Coat Cut Face of Profile with ACSIL04 Prior to Crimping (available in colours - see Table 1) ACSIL013 Do Not Scale From This Drawing ISSUED : JULY 2016 PAGE E03

10 Alitherm Heritage CONSTRUCTION DRAINGS Crimping Details AC907 (5.6mm Packer) Manual Crimper = UT024HSA ACET904 AC916 (Support Packer) AC20117 ACET AC20056 ACET918 ACET310 ACET310 ACET982A ACET975 (4mm Tufnel Packer) AC20056 AC910 ACET975 (4mm Tufnel Packer) ACET977 (6mm Packer) ACET077 AC909 AC907 (5.6mm Tufnel Packer) AC20056 AC910 AC20127 AC20055 AC20127 ACET310 ACET077 ACET979N AC918 ACET990 (9.3mm Packer) AC20110 ACET904 AC907 (5.6mm Tufnel Packer) ACET077 AC AC20056 AC20055 AC909 ACET975 (4mm Tufnel Packer) AC908 (4mm Packer) AC20056 AC20055 AC909 AC922 AC906 AC906 AC906 AC906 AC906 Do Not Scale From This Drawing PAGE E04 ISSUED : APRIL 2017

11 New Handle Range Bulletin Page 1 of 4 Introducing our new range of espag window handles, tilt-before-turn handles and lever/lever door handles which can be powder coated to match the aluminium frames. The following finish options are available: Mill Finish Colour Brushed Satin Chrome Smokey Chrome hite Black Polished Chrome The lever/lever door handles are available with the below lever options: Ø Ø17 Standard Lever Oval Lever Round Lever Swept Lever DRAFT: DO NOT ISSUE

12 New Handle Range Bulletin Page 2 of 4 ACET460 Inline Espag Handle with 9mm Spindle 1 Each Alitherm ACET465 L/R Cranked Espag Handle with 9mm Spindle 1 Each Alitherm ACET461 Inline Espag Handle with 15mm Spindle 1 Each Eco Futural ACET466 L/R Cranked Espag Handle with 15mm Spindle 1 Each Eco Futural ACET462 Inline Espag Handle with 55mm Spindle 1 Each Alitherm 700 ACET467 L/R Cranked Espag Handle with 55mm Spindle 1 Each Alitherm 700 ACET463 Locking TBT 25mm Spindle Handle 1 Each Eco Futural ACET464 1 Each Alitherm Non-Locking TBT 25mm Heritage Spindle Handle Eco Futural Alitherm Heritage DRAFT: DO NOT ISSUE

13 New Handle Range Bulletin Page 3 of 4 Handle Centres for: ACET & ACET Handle Centres for: ACET463 & ACET464 Ø10 n10 Ø10 Ø10 n n Plaese Note: ACET463 & ACET464 are spindle handles and require the correct adaptors: Fapim: ACFA212 SB Chrono: ACS905 DRAFT: DO NOT ISSUE

14 New Handle Range Bulletin Page 4 of 4 ACET480 PAS24 Standard Lever/Lever Handle (Replaces ACDV351) ACET484 Standard Lever/Lever Handle 1 Pair 1 Pair Alitherm Plus Visofold Visofold Handle Centres for: ACET480 & ACET n13 n10.5 ACET486 Swept Lever/Lever Handle 1 Pair Visofold n17.5 ACET487 Oval Lever/Lever Handle 1 Pair Visofold n10.5 n10.5 ACET488 Round Lever/Lever Handle 1 Pair Visofold DRAFT: DO NOT ISSUE

15

16