REOTEMP INSTRUMENT CORPORATION Telephone: (800) FAX (858)

Transcription

1 REOTEMP INSTRUMENT CORPORATION Telephone: (800) FAX (858) Table of Contents Bimetal Thermometers General Bimetal Specifications Page 3 3, 4 & 5 Back Connection Page 4 3, 4 & 5 All-Angle Connection Page 5 3, 4 & 5 Bottom Connection Page 6 Heavy-Duty Navy Thermometer Page 7 Dual Mode Thermometer (DMT) Page 8-9 OEM Thermometers Page 10 Laboratory Thermometers Page 11 Compost Thermometers Page 11 Sanitary Bimetal Thermometer Page 12 Bimetal Thermometer Accessories and Ranges Page 13 Thermowells Threaded Type (1/4 elements) Page 14 (3/8 elements) Page 24 Sanitary Type Page 14 Flanged Type Page 15 Filled System Thermometers Industrial Glass Thermometer Page 16 Vapor Actuated Remote Thermometers Page Gas Actuated Remote Thermometers Bourdon Tube Type Page Direct-Drive Type Page Digital Thermometers Page 28 RTD s & Thermocouples Page Sanitary RTD s Page Established in 1965 and located in San Diego, California, REOTEMP Instrument Corporation is recognized as a leading manufacturer of pressure and temperature instrumentation. REOTEMP provides bimetal thermometers, pressure gauges, diaphragm seals and related accessories to a variety of process markets worldwide. Recognized for REGISTERED E R E exceptional customer service, on-time deliveries and innovative engineering services, REOTEMP is an ISO 9002 certified manufacturer. We are dedicated to continuous improvement, on-time deliveries, high quality products, and exceptional customer satisfaction. Surface Thermometers Page 35 Markets Served Pocket Thermometers Page 35 Warranty Back Page Oil, Gas & Petrochemical Pharmaceutical Food & Beverage Paper & Pulp Mining Utilities Marine Waste Water Compost Military Dairy Power Generation Refrigeration And More! 2

2 REGISTERED E R E Bimetal Thermometers Specifications Specifications Bimetal Dial Thermometers Dial Sizes: 1 1/8, 1 3/4 2 3/8, Stem Length: Between 2 and 80 Stem Diameters: 1/4 (standard), also available 5/16, 3/8. Heads, bezels, mounting bushing, stems: All Models 300 series SS Operating Conditions: The temperature of the head should not be allowed to exceed 200 F (150 F if silicone filled). Stems should not be exposed to continuous temperatures exceeding 50% overrange, or 800 F. Hermetic seal: All 3, 4, and 5 models (except DM4) are hermetically sealed per ASME B40.3. Pointed Stems: Optional on all models. Excellent for probing asphalt, compost, soil, frozen foods or other semi-solid materials. Dials: Anodized aluminum. Black marks and numbers with satin matte finish background. Crystals: Optically clear strong glass. Optional: Unbreakable clear plastic: all models (Not recommended for ranges over 500 F). Optional: Shatterproof tempered glass (3, 4, and 5 models). Accuracy: All Models are guaranteed accurate to within plus or minus 1% of the full scale (Grade A per ASME B40.3). Temperature readings are stabilized within 40 seconds. Immersion: For correct temperature measurement, the stem of all Models in all ranges must be immersed 2 inches in liquid, and 4 inches in gas except for 0 to 100 F, 25 to 125 F, and 0 to 50 C which require 3 1/2 inches in liquid and 5 inches in gas. Mounting Connections: 1/2 NPT (std. on 3, 4, 5 models), 1/8 NPT, 1/4 NPT, 3/8 NPT, 3/4 NPT, 3/8-24 NF, Plain or Reset Bushing, 1/2 NPT Union, 1/2 BSPT, BSPP Adapters. Thermowells Thermowells should be used whenever the stem or bulb would be exposed to pressure, corrosion, or shear forces. Thermowells also make it possible to remove the thermometer without losing pressure or contents. (See pages for more details) O.E.M. Applications If you are an Original Equipment Manufacturer and plan to incorporate the REOTEMP Thermometer in your finished product for resale, special ranges or special dials can be made to suit your particular requirements. Such specials can bear your own company name and/or trademark on the dial. The quality, appearance, and performance of a REOTEMP Thermometer will complement and enhance your equipment. 3

3 Bimetal Thermometers Industrial 3, 4, 5 Dial Back Connected (Angle Form) REOTEMP Angle Form thermometers are ideal for local, eye-level temperature readings in most process applications. Standard Features All Stainless Steel Construction Hermetically Sealed (ASME B40.3) Accurate to 1% of Full Scale Standard External Reset Silicone Fillable for Vibration AA F43 SF 4 Models Stem Connection Temperature Ranges Length See pg.13 for a full list. Options Standard Models Standard Threaded* Fahrenheit Ranges AA = BB = CC = Model A (3" dial, reset) Model B (5" dial, reset) Model C (4" dial, reset) 025 = 2.5" 040 = 4" 060 = 6" 090 = 9" 1 = 1/2" NPT (std.) 4 = 1/4" NPT 5 = 3/4" NPT adapter X = Plain Hex Bushing (no threads) F23 F55* F43 F47 F63 F67 F81 F85-40 TO 160 F 25 TO 125 F 0 TO 200 F 0 TO 250 F 50 TO 300 F 50 TO 500 F 150 TO 750 F 200 TO 1000 F PS = Pointed Stem SF = Silicone Fill (max temp 550 F) SS = 316 SS Stem F3 = 3/8" dia. Stem 120 = 12" Celsius Ranges Non-Reset Models B = 1/2" BSPT C23-40 TO 70 C PC = Acrylic Window RR = Model R 150 = 15" C55* 0 TO 50 C (3" dial, no reset) Sanitary* C43 0 TO 100 C P = Polycarbonate 180 = 18" C = 1-1/2" Tri-Clamp C47-20 TO 120 C Window SS = Model S C59 0 TO 150 C (5" dial, no reset) 240 = 24" L = 2" Tri-Clamp C67 C81 0 TO 250 C 0 TO 400 C TG = Tempered Glass Window CN = Model CN 300 = 30" M = 3/4" Tri-Clamp C TO 500 C (4" dial, no reset) Dual F/C Ranges MM = Max/Min Pointer 360 = 36" For more information on D23-40 TO 160 F & -40 TO 70 C Sanitary Thermometers D55* 25 TO 125 F & 0 TO 50 C see page 12 D43 0 TO 200 F & 0 TO 100 C -Intermediate D47 0 TO 250 F & -20 TO 120 C For Thermowells lengths available D63 50 TO 300 F & 10 TO 150 C see pg. 14 up to 80 D67 50 TO 500 F & 0 TO 250 C -Specify length in D TO 750 F & 0 TO 400 C inches + tenths D TO 1000 F & 100 TO 500 C *-Other sizes available *-Not available in 2.5" stem. REOTEMP INSTRUMENT CORPORATION Telephone: (800) FAX (858) sales@reotemp.com

4 Adjustable Angle Bimetal Thermometers Industrial 3, 4, 5 Dial REGISTERED E R E REOTEMP All-Angle thermometer allows for easy temperature monitoring from any position. Standard Features Complete 180 Adjustability All Stainless Steel Construction Hermetically Sealed (ASME B40.3) Accurate to 1% of Full Scale Standard External Reset Silicone Fillable for Vibration 360 Case Rotation LL F43 SF Models Stem Length Connection Temperature Ranges See pg.13 for a full list. Options Standard Models Standard Threaded Fahrenheit Ranges LL = Model L (3" dial, reset) MM = Model M (4" dial, reset) JJ = Model J (5" dial, reset) 025 = 040 = 060 = 090 = 120 = 150 = 180 = 240 = 2.5" 4" 6" 9" 12" 15" 18" 24" 1 = 5 = U = C = L = M = 1/2" NPT (std.) 3/4" NPT adapter 1/2" NPT Union Sanitary* 1-1/2" Tri-Clamp 2" Tri-Clamp 3/4" Tri-Clamp F23 F55* F43 F47 F63 F67 F81 F85 C23 C55* C43 C47 C59 C67 C81-40 TO 160 F 25 TO 125 F 0 TO 200 F 0 TO 250 F 50 TO 300 F 50 TO 500 F 150 TO 750 F 200 TO 1000 F Celsius Ranges -40 TO 70 C 0 TO 50 C 0 TO 100 C -20 TO 120 C 0 TO 150 C 0 TO 250 C 0 TO 400 C PS = SF = SS = F3 = PC = P = TG = Pointed Stem Silicone Fill (max temp 550 F) 316 SS Stem 3/8" dia. Stem Acrylic Window Polycarbonate Window Tempered Glass Window 300 = 30" C TO 500 C For more information on Sanitary Thermometers see Dual F/C Ranges MM = Max/Min Pointer 360 = 36" page 12 D23 D55* -40 TO 160 F & 25 TO 125 F & -40 TO 70 C 0 TO 50 C -Intermediate D43 0 TO 200 F & 0 TO 100 C For Thermowells lengths available D47 0 TO 250 F & -20 TO 120 C see pg. 14 up to 80 D63 50 TO 300 F & 10 TO 150 C -Specify length in inches + tenths D67 D81 50 TO 500 F & 150 TO 750 F & 0 TO 250 C 0 TO 400 C D TO 1000 F & 100 TO 500 C *-Other sizes available *-Not available in 2.5" stem. 5

5 Bimetal Thermometers Industrial 3, 4, 5 Dial Bottom Connected (Straight Form) Reset.75 3" dia (Model XR) 4" dia (Model ) 5" dia (Model VR) REOTEMP Straight Form thermometers are ideal for REGISTERED E R E side and elevated installations on tops or sides of tanks or pipes. Standard Features (Standard) Stem Length.62 1/4" dia Bottom, Top, Right or Left Side Mounting All Stainless Steel Construction Hermetically Sealed (ASME B40.3) Accurate to 1% of Full Scale Standard External Reset Silicone Fillable for Vibration XR F43 SF 6 Models Stem Length Connection Temperature Ranges See pg.13 for a full list. Standard Models Standard Threaded* Fahrenheit Ranges XR = Model XR (3" dial, reset) = Model (4" dial, reset) VR = Model VR (5" dial, reset) Non-Reset Models XX = Model X 025 = 2.5" 040 = 4" 060 = 6" 090 = 9" 120 = 12" 150 = 15" 1 = 1/2" NPT (std.) 4 = 1/4" NPT 5 = 3/4" NPT adapter Sanitary* C = 1-1/2" Tri-Clamp L = 2" Tri-Clamp F23 F55* F43 F47 F63 F67 F81 F85 C23 C55* -40 TO 160 F 25 TO 125 F 0 TO 200 F 0 TO 250 F 50 TO 300 F 50 TO 500 F 150 TO 750 F 200 TO 1000 F Celsius Ranges -40 TO 70 C 0 TO 50 C PS = SF = SS = F3 = PC = Pointed Stem Silicone Fill (max temp 550 F) 316 SS Stem 3/8" dia. Stem Acrylic Window (3" dial, no reset) M = 3/4" Tri-Clamp C43 0 TO 100 C P = Polycarbonate 180 = 18" C47-20 TO 120 C Window N = Model N C59 0 TO 150 C For more information on (4" dial, no reset) 240 = 24" C67 0 TO 250 C TG = Tempered Glass Sanitary Thermometers C81 0 TO 400 C Window see page 12 VV = Model V 300 = 30" C TO 500 C (5" dial, no reset) Dual F/C Ranges MM = Max/Min Pointer 360 = 36" D23-40 TO 160 F & -40 TO 70 C D55* 25 TO 125 F & 0 TO 50 C 99 = 9 O'Clock Stem -Intermediate D43 0 TO 200 F & 0 TO 100 C (left side) lengths available up to 80 D47 D63 0 TO 250 F 50 TO 300 F & & -20 TO 120 C 10 TO 150 C 33 = 3 O'Clock Stem D67 50 TO 500 F & 0 TO 250 C (right side) -Specify length in D TO 750 F & 0 TO 400 C inches + tenths D TO 1000 F & 100 TO 500 C 12 = 12 O'Clock Stem *-Other sizes available *-Not available in 2.5" stem. REOTEMP INSTRUMENT CORPORATION Telephone: (800) FAX (858) sales@reotemp.com Options (top mount)

6 Heavy-Duty Navy Type Standard Features Bimetal Thermometers Heavy-Duty Navy Type Back (Angle) Form 3 Dial Bimetal Actuation Heavy Duty Vibration and Shock Resistant Stainless Steel Sealed Construction Plastic Crystal External Reset is Standard 1% Accuracy Fits in 5 Scale Submarine Thermometer Well 3/4 28 UN2A Union Connection (to be used in thermowell) Straight Form 1. Model 2. Range Models Ranges Back Angle Form Fahrenheit Ranges AN2= AN4= AN6= F23 F25 F43 F53-40 TO 120 F in 2 divs.* -40 TO 180 F in 2 divs. 0 TO 200 F in 2 divs. 20 TO 240 F in 2 divs. Straight Form F63 50 TO 300 F in 2 divs. XN2= XN4= XN6= F65 F69 F73 50 TO 400 F in 5 divs. 50 TO 550 F in 5 divs. 50 TO 750 F in 10 divs. Note: minimum Celsius Ranges im m ersion length is 2 C13-50 TO 50 C in 1 divs.* C53-10 TO 110 C in 1 divs. C59 0 TO 150 C in 2 divs. C65 0 TO 200 C in 2 divs. C69 0 TO 300 C in 5 divs. *-4" Minimum stem length (on straight, left, or right side forms only) Thermometer Wells Well Class Class A (3/4" NPT) Class W (Socket Weld) Thermometer Well Length Stem Length (overall) 2" 3 1/4" 4" 5 1/4" 6" 7 1/4" 2" 3 5/16" 4" 5 5/16" 6" 7 5/16" Brass STN2B STN4B STN6B Model No. 304 SS 316 SS STN2S STN4S STN6S STN2SS STN4SS STN6SS SWN2SS SWN4SS SWN6SS A & W Wells Bimetal Thermometers Silicone-Filled Thermometers 1" 2 3" STEM 4 LENGTH 1 2 "DIA. 1 5/16" 1.05" DIA. STEM LENGTH REOTEMP Silicone-filled thermometers are offered for severe industrial applications, where vibration is a problem. Silicone dampening prolongs instrument life by preventing wear and fatigue in the instrument s internal parts. The silicone also improves readability by reducing pointer flutter, and promotes faster temperature response. Any REOTEMP 3, 4 or 5 dial bimetal thermometer (except Model DM4) can be silicone filled, in any stem length, and any temperature range up to 550 F. (Silicone filling with ranges over 550 F not recommended.) All silicone-filled thermometers come with a durable polycarbonate crystal. Specify option SF at the end of any 3, 4 or 5 dial bimetal thermometer. (e.g., Model AA F47-SF). See pg

7 Bimetal Thermometers Dual-Mode Thermometer REGISTERED E R E REOTEMP DUAL MODE THERMOMETER (model DMT) is a convenient, multipurpose indicator for local and remote temperature monitoring. This rugged dual-sensor system puts TWO SENSORS in ONE THERMOWELL, and allows easy tie-in to process control. Both sensors are NIST traceable, and easily calibrated. Special sensor encapsulation and optional liquid filling make the DMT the most rugged, durable instrument of its kind. Bimetal Thermometer Local easy-to-read Temperature Indication Self-actuating, Dampened Bimetal Helix Choice of three Dial Sizes, with Back, Bottom, or Adjustable Angle Connection Hermetically Sealed per ASME B40.3 Thermometer is Easily Calibrated, and Field Replaceable NIST Traceable Calibration Thermocouple or RTD Remote and Local Indication Data Acquisition for Process Control Choice of Connection Styles (see drawing below) 4-20mA Transmitter Output Available Model DMT with Screw Cover Terminal Head, and Adjustable- Angle Head DMT Advantages: Allows local and remote reading (Up to 1000 F) from one thermowell. Bimetal dependability with RTD (or thermocouple) accuracy. Redundant sensors for simple, effective calibration or spot checking without removing instrument from thermowell! Easily installed in any standard thermowell. Interchangeable with existing thermometer, RTD, Thermocouple. with optional T/C Transmitter (HT) or with optiona RTD Transmitter (HR) 8 REOTEMP INSTRUMENT CORPORATION Telephone: (800) FAX (858) sales@reotemp.com

8 Bimetal Thermometers Dual-Mode Thermometer Model Style/Stem Stem Length Temp Range Sensor Output Thermowell (Table 1) (Table 2) (Table 3) (Table 4) Connection (Table 5) (Table 6) DM TA 04 F24 TK MC 046 Table 1 - Style & Stem Dia. Code 3/8" Stem 1/4" Stem Description TA 4A 3" Back Connected TC 4C 4" Back Connected TB 4B 5" Back Connected TL 4L 3" Adjustable-Angle TM 4M 4" Adjustable-Angle TJ 4J 5" Adjustable-Angle Table 2 - Stem Length Code Length Code Length 02* " 4" 6" 9" 12" " 18" 24" 30" 36" Table 3-Temperature Range * available only with 3/8 dia. stem. Code Degrees F Code Degrees C Code Degrees F & C F TO 100 F C03-70 TO 70 C D TO 100 F &-70 TO 70 C F23 40 TO 160 F C23-40 TO 70 C D TO 160 F &-40 TO 70 C F55* 25 TO 125 F C55* 0 TO 50 C D55 25 TO 125 F & 0 TO 50 C F43 0 TO 200 F C43 0 TO 100 C D43 0 TO 200 F & 0 TO 100 C F47 0 TO 250 F C47-20 TO 120 C D47 0 TO 250 F &-20 TO 120 C F53 20 TO 240 F C53-10 TO 110 C D53 20 TO 240 F &-10 TO 115 C F63 50 TO 300 F C59 0 TO 150 C D63 50 TO 300 F & 10 TO 150 C F65 50 TO 400 F C65 0 TO 200 C D65 50 TO 400 F & 10 TO 200 C F69 50 TO 550 F C69 0 TO 300 C D69 50 TO 550 F & 10 TO 290 C F TO 800 F C79 50 TO 400 C D TO 800 F & 40 TO 400 C F85** 200 TO 1000 F C85** 100 TO 500 C D85** 200 TO 1000 F& 100 TO 500 C * min. stem length 4 **continuous use over 800F not recommended. DMT Specifications Case and Bezel: 304 SS (316 SS Available) Case Style: Back, Bottom or Adjustable Angle connection. Dial Size: 3, 4 or 5 Process Connection: 1/2 NPT Standard, (1/2 NPT Union available) External Reset: Slotted Hex Screw Connection: Crystal: Glass Standard, Plastic or Tempered Glass optional Hermetic Seal: Bi-Metal Thermometer per ASME B40.3 Ranges: Stem: 304 SS, O.D. (1/4 O.D. - specify Over Ranges: DMT4 ) Lengths from 2-1/2 to 36 Accuracy: RTD-T/C Encapsulation Sleeve (Pat.pending): 304 SS Thermowell: RTD: 100Ω (or 1000Ω optional) Platinum; Ω/Ω/ C, 3-wire std. Options: Thermocouple: Type K grounded junction std. (Optional: types NOTE: T, E, J, or ungrounded.) Code MP MC Process Connection 1/2" NPT 3/4" NPT 1" NPT Table 6 - Thermowell (.385 &.260 bore) Stem Length "U" Dim 4" 2.5 6" 4.5 9" " " 2.5 6" 4.5 9" " " 2.5 6" 4.5 9" " /8 Stem 1/4" Stem 304 SS 316 SS 304 SS 316 SS Table 5 - Output Connection Description Mini - Plug Receptacle (Thermocouple Only) Mini - Connection Head, w/screw terminals & protection head 1/2" NPT Male Electrical Connection, w/lead Wire EC Aluminum screw - Cover Head w/3/4" NPT Conduit Connection HA with Terminal Block HT with 4-20 ma Transmitter (for Thermocouple) HR with 4-20 ma Transmitter (for RTD) Table 4 - Sensor Code Description TK Thermocouple, Type K (grounded) TJ Thermocouple, Type J (grounded) TE Thermocouple, Type E (grounded) TT Thermocouple, Type T (grounded) UK Thermocouple, Type K (ungrounded) UJ Thermocouple, Type J (ungrounded) UE Thermocouple, Type E (ungrounded) UT Thermocouple, Type T (ungrounded) RC RTD, 100 ohm, 3-wire max. RK RTD, 1000 ohm, 3-wire } 550 F T/C plug, Mini connection head, or Standard screw-cover connection head are available, Special customer requirements accommodated. Std. REOTEMP ranges and divisions to 1000F (500C) 50% over range to 550F, 1000F max. (+/-) 1% of full scale Model DMT fits any standard bore thermowell. (See table for Std. Models). Silicone Case Fill for Vibration. (3/8 stem only) Model DMT is intended for use ONL in a thermowell. 3-A and NACE conformity available. 9

9 Bimetal Thermometers OEM Dial Bimetal Thermometers REGISTERED E R E REOTEMP OEM Thermometers (Models Q, G, and H) are the perfect choice for equipment with limited space and requiring a rugged, dependable and economical temperature sensor. Available with a wide variety of mounting threads. Model Q - 1 5/32 Dial Model G /16 Dial Model H - 2 3/8 Dial dia 1/4" dia.33 dia 1/4" dia 1/4 1/4" dia Dia dia 1.70 dia 2.37 dia.29 Stem Length.30 Stem Length.36 Stem Length Mounting Thread Options 1/2 NPT 3/8 NPT 3/8-24 UNF 1/4 NPT 1/8 NPT 9/16 HEX BUSHING 10 QQ F43 PS Models Stem Length Connection Temperature Ranges (See pg 13 for full list) OEM Models Fahrenheit Ranges QQ = Model Q (1-1/4" dial) GG = Model G 025 = 040 = 2.5" 4" 2 = 1 = Plain Bushing (std.) 1/2" NPT F23 F55* F43 F47-40 TO 160 F 25 TO 125 F 0 TO 200 F 0 TO 250 F PS = Pointed Stem SS = 316 SS Stem (1-3/4" dial) 060 = 6" 3 = 3/8-24 NF F63 0 TO 300 F PC = Plastic Window (straight threaded) F67 50 TO 500 F HH = Model H 090 = 9" F TO 750 F PB = Plain Bushing (2-3/8" dial) 4 = 1/4" NPT F TO 1000 F (non-reset)* 120 = 12" Celsius Ranges Lab & Test Models 6 = 1/8" NPT C23-40 TO 70 C QP = Model QP 150 = 15" C55* 0 TO 50 C *for lab and test (1-1/4" dial) 7 = 3/8" NPT C43 0 TO 100 C Models only 5" Stem 180 = 18" C47-20 TO 120 C 8 = Hex Reset Bushing C63 0 TO 150 C GL = Model GL 240 = 24" C67 0 TO 250 C (1-3/4" dial) C81 0 TO 400 C 8" Stem 300 = 30" C TO 500 C Dual F/C Ranges HL = Model HL 360 = 36" D23-40 TO 160 F & -40 TO 70 C (2-3/8" dial) 8" Stem -Intermediate lengths available D55* D43 25 TO 125 F 0 TO 200 F & & 0 TO 50 C 0 TO 100 C up to 80" D47 0 TO 250 F & -20 TO 120 C -specify length in inches + tenths D63 D67 D81 0 TO 300 F 50 TO 500 F 150 TO 750 F & & & 0 TO 150 C 0 TO 250 C 0 TO 400 C D TO 1000 F & 100 TO 500 C *-Other sizes available *-Not available in model Q. REOTEMP INSTRUMENT CORPORATION Options Telephone: (800) FAX (858) sales@reotemp.com

10 Bimetal Thermometers Hand-held Laboratory Thermometers REOTEMP Laboratory Thermometers (QP, GL & HL) are ideal for testing and spot checking local temperatures in a variety of critical process or lab applications. Pointed stems are available for insertion in semi-solids such as soil, meat, etc. Model QP - 1 5/32 Dial Model GL /16 Dial Model HL - 2 3/8 Dial (with point - Model QPP) (with point - Model GLP) (with point - Model HLP).24 9/16" Hex Re-set Bushing 1/4" dia.24 9/16" HEX RE-SET BUSHING 1/4" dia.24 9/16" Hex Re-set Bushing 1/4" dia 1.16" dia 1.70" dia 2.37" dia.30 6" Stem.30 8" Stem.36 8" Stem Specify Model and Range (see table, pg. 10), Example: QP - F43 Bimetal Thermometers Compost Thermometers Applications For Composting Food and ard Waste Used By: Ideally suited for monitoring interior temperature of compost bins or windrows. Waste Treatment Plants. City, State and Federal Recycling Programs. Farms and University Compost Programs. Compost Chicken, Hog and Fish wastes. Mushroom Farms. Standard Model: A36 PF (36 Pointed Stem, 0/200 F) Also Backyard Compost Thermometer: G20P (2 Dial, 20 Stem, 0/200 F) Standard Features Hermetically sealed will not fog Pointed stem for easy insertion Rugged, all stainless construction Heavy duty 5/16 diameter stem Easy to read 3 diameter dial Unbreakable plastic crystal F & C scales available (Std. range, F) Accuracy + /- 1% of scale Stem lengths up to 72 available 11

11 Sanitary Bimetal Thermometers Sani-Temp REOTEMP SANI-TEMP Bimetal Thermometer is specially designed for direct insertion into sanitary process applications when a standard thermowell is not specified or the process environment is not exposed to pressure. The SANI-TEMP provides a quick temperature response and will mate with existing process connections. The SANI-TEMP is ideal for the food, beverage and pharmaceutical industries. C Dia. Quick connect Tri-clamp design Fast installation and removal Hermetically sealed case Ideal for CIP and SIP Designed to meet 3A Sanitary standards External Reset 12 Thermometer Head How to to Order Use Codes on pg. 4, 5, 6. Specify Sanitary Connection. Sanitary Flange "C" see chart Stem Length Customer Specified Flange Type 1 4 " dia Sanitary Flange Sizes Specifications REOTEMP INSTRUMENT CORPORATION Dial Size: Wetted Parts: 316/316L polished stainless Case & Ring: 300 series polished st. stl. Process Connection: Tri-clamp (standard), Cherry-Burrell (optional) Windows: Glass- (standard) see option table Optional: Acrylic, Polycarbonate, or Tempered Glass Silicone Filling available for Vibration Bimetal Models Stem Lengths Temperature Range (See pg. 13 for a full list.) Back Connected Farenheit Celsius Tri-Clamp M = 3/4" A = 3" 2 1/2" F23-40 TO 160 F C23-40 TO 70 C (standard) C = 4" F55* 25 TO 125 F C55* 0 TO 50 C C = 1" or 1 1/2" B = 5" 4" F43 0 TO 200 F C43 0 TO 100 C See pg. 4 F47 0 TO 250 F C47-20 TO 120 C F63 C63 L = 2" Bottom 6" 20 TO 240 F -10 TO 110 C F67 C67 Connected F81 50 TO 300 F C81 0 TO 150 C A = 2 1/2" XR = 3" 9" F85 50 TO 400 F C85 0 TO 200 C = 4" T = 3" VR = 5" 12" Dual F/C Ranges See pg. 6 D23-40 TO 160 F & -40 TO 70 C Adjustable 15" D55* 25 TO 125 F & -5 TO 50 C Angle D43 0 TO 200 F & -10 TO 90 C D47 & Other L = 3" Other 0 TO 250 F -20 TO 120 C D63 & Types M = 4" Stems D67 20 TO 240 F & -10 TO 115 C Available J = 5" Available D81 50 TO 350 F & 10 TO 150 C See pg. 5 D85 50 TO 400 F & 10 TO 200 C Telephone: (800) FAX (858) sales@reotemp.com

12 REGISTERED E R E Sanitary Bimetal Thermometers Temperature Ranges Bimetal Temperature Range Master List - (Other ranges available on application. = available) Code F Ranges Div Q G H 3,4,5** Code C Ranges DivQ G H 3,4,5** Code Dual Ranges Q G H 3,4,5** F03-100/100F 2 C03-70/70C D03-100/100F & -70/40C F07-80/120F 2 C07-50/50C 1 F11 F21-70/150F -40/120F 2 2 C11-50/100C 2 D11-50/210F & -50/100C F23-40/160F 2 C23-40/70C 1 D23-40/160F & -40/70C -50/200C 2-50/300F 2 C19-40/160C 2-20/120F 2 C31-20/40C* 1 F19 F31 F35 F55 F37 F39 F43 F45 F47 F53 F63 F65 F67 F69 F79 F81 F85 0/100F* 0/220F 1 2 * = Minimum stem 4" ** Includes all 3", 4", and 5" models (back, bottom, or all-angle) 25/125F* 0/140F 1 2 C55 C37 0/50C* 0/60C* 1/2 D55 D37 25/125F & -5/50C* 0/140F & -15/60C 0/150F 1 D39 0/150F & -20/70C 0/200F 2 C43 0/100C 1 D43 0/200F & -10/90C 0/250F 2 C47-20/120C 2 D47 0/250F & -20/120C 20/240F 2 C53-10/110C 1 D53 20/240F & -10/115C 50/300F 50/400F 50/500F 50/550F C63 C65 C67 C69 0/150C 0/200C 0/250C 0/300C D63 D65 D67 D69 50/300F & 10/150C 50/400F & 10/200C 50/500F & 10/260C 50/550F & 10/290C 100/800F 10 C79 0/400C 5 150/750F 10 C81 50/400C 5 D81 150/750F & 70/400C 200/1000F 10 C85 100/500C 5 D85 200/1000F & 100/500C Bimetal Thermometers Accessories Accessories Options AS-86 Adapter Kit: permits Code Description Model installation of bimetal Minimum or Maximum MM 3, 5 thermometer in existing resettable pointer (one hand) Minimum and Maximum mercury-in glass-industrial MA 3, 5 resettable pointer (two hands) thermometer thermowell. TG Tempered Glass Lens 3, 4, 5 HT Heat Transfer Compound PC Plastic Lens All (2 oz, 1 lb containers) SF Silicone Filled 3, 4, 5 D3 Duct Flange (1/2" NPT) SD Silicone Filled, food grade 3, 4, 5 Glycerine Filled 3, 4, 5 CH T-27 spring handle GF PS Pointed Stem All CP Pan Clip 3H 316SS Head and Bezel 3, 4, 5 SS 316SS Stem All Calibration F5 5/16 diameter stem 3, 4, 5 S3 3/8 diameter stem 3, 4, 5 CC Certificate of Conformance F3 3/8 diameter aluminum sleeve 3, 4, 5 C1 1 Point Calibration TF Teflon Coating (stem only) All Certificate MB External Mounting Brackets G, H Stainless Steel Tags All C3 3 Point Calibration TS TP Paper Tags All Certificate NL No Logo Dial All BQ BBQ Dial 3 Also available on request Custom dials, special ranges, special configurations. 13

13 Thermowells Threaded, for Bimetal Thermometers REGISTERED E R E Thermowells make it possible to remove instruments without dropping pressure or losing contents. Each stainless Thermowell die stamped with type of material from which it is made. Type ST 1. Type: 2. Thermometer Stem Length: Example: 3. Material: 4. External Thread: ST SS 3/4 Type LG T Lag Extension Sanitary Thermowells Models Stem Material External Thread Options "A" Dim "U" Dim 304 SS 3/4" NPT Socket-Weld 2 1/2" 1 5/8" (Standard) Well 4" 2 1/2" 316 SS ST 6" 4 1/2" Optional: Tapered 9" 7 1/2" Brass 1/2" NPT 12" 10 1/2" Straight 15" 13 1/2" Carbon 1" NPT 18" 16 1/2" Steel Santary "A" Dim "U" Dim "T" Dim Tri-Clamp 6" 2 1/2" 2" 9" 4 1/2" 3".385 Bore LG 12" 7 1/2" 3" (for 3/8" (lagging) 15" 10 1/2" 3" elements) 18" 13 1/2" 3" 24" 19 1/2" 3" BORE 1/2 MAX O.D. REOTEMP INSTRUMENT CORPORATION Features Provides Sanitary Protection for Temperature Probes All 316L Stainless Steel Construction Fast Installation & Removal Ideal for Food, Beverage, Biotech & Pharmaceutical Applications Finish Exceeds Ra 32 max. Exceeds 3A #4 Finish Tri-Clamp Size "A" Stem Lengths Part No. "U" Dim 2 1/2" 4" 6" 9" 2 1/2" 4" 6" 9" 2 1/2" 4" 6" 9" 2 1/2" 4" 6" 9" STF STF1.5-4 STF1.5-6 STF1.5-9 STF2-2.5 STF2-4 STF2-6 STF2-9 STF STF2.5-4 STF2.5-6 STF2.5-9 STF3-2.5 STF3-4 STF3-6 STF /8" 2 1/2" 4 1/2" 7 1/2" 1 5/8" 2 1/2" 4 1/2" 7 1/2" 1 5/8" 2 1/2" 4 1/2" 7 1/2" 1 5/8" 2 1/2" 4 1/2" 7 1/2" Telephone: (800) FAX (858) sales@reotemp.com 1 1/2" 2" 2 1/2" 3" Specify Part Number: "C" Dim (Flange Dia.) 2 (51mm) 2.5 (63mm) 3.6 (76mm) 4.7 (91mm)

14 REGISTERED E R E Thermowells Flanged Well 2-1/4 U INSERTION LENGTH 1/4" BORE TPES Standard Threaded Wells 1/4" A (.75) 1.0 Q BORE DIA 1-1/4" dia Q 1/2" NPT (.50) FLANGE SIZE & RATING CUSTOMER SPECIFIED P U A ELEMENT LENGTH Sanitary Well Socket-Weld Well 1/8" A 3/8" DIA 1-3/4" Q2 U 1/4" BORE SIZE C P Q1 1/2" NPT (.250 DIA) U 1/4" 1/2" NPT A Standard Stepped Shank Q1 SHANK STLES Tapered Shank Q1 Q2 Q2 Straight Shank Q Order By Specifying: 1. Type and Bore Dia. 2. Thermometer Stem A Length or U dimension. 3. Material. 4. Shank Style. 5. For Flanged Wells: -Flange Size and Rating. 6. For Threaded Wells: -Process Thread (P). 7. For Socket-Weld Wells: -Nominal Pipe Size. Type Externally Threaded (Standard Bimetal Type) Element Length or (U-dim) See Table pg. 14 Material Shank Style Flanged Carbon Steel Tapered Socket Weld Brass Sanitary Type 316L SS Monel Hastelloy B Hastelloy C Titanium Tantalum Teflon Flange Wells Flange Size and Rating Socket-Weld Wells Pipe Size Nom. 304 SS Stepped Example: Example: 316 SS Straight 1 1/2", 150# 3/4" Pipe Call Factory for help specifying well, if needed 15

15 Liquid-In-Glass Thermometer All Angle Industrial Specifications: Case: Modern V-shape design with parts molded of GE Valox polyester, in black textured finish. Heavy glass protected front firmly secured by spring action. Stem: Tapered bulb chambers are made of precision ground aluminum. The tapered chamber forms a metal contact with matching taper in the sockets assuring maximum speed of response to temperature changes. Graphite is used as a conducting media between bulb chamber and glass tube. Locking Device: Adjustable case locknut and angle adjusting screw work independently to provide full 360 positioning of thermometer case and stem. Tube & Capillary: Mercury filled-magnifying lens Red Reading tube (Spirit Filled option available). Precision made to guarantee accuracy within 1% of scale range. Silicone shock mounting for lasting durability. When Mercury is not desired, alcohol-based spirit fill is available Scale: 9" scale with white coated aluminum and permanently baked bold black markings. Applications: REOTEMP All Angle Industrial Thermometers are used in pipelines of all types, commercial building application (heating & cooling), process piping, tanks, boilers, etc. 16 9VX SOC35B INDUSTRIAL THERMOMETERS 9 Scale, All Angle with 1 1/4-18 Swivel Nut Stem Part # Mercury Filled Spirit Filled 3 ½" 9VX35 9VS35 6" 9VX06 9VS06 9" 9VX09 9VS09 STANDARD Code Range Divisions TO 110 F 2-10 TO 180 F 2-20 TO 120 F 2 0 TO 120 F 1 0 TO 160 F 2 30 TO 180 F 2 30 TO 240 F 2 30 TO 300 F 2 1. Part # 2. Range Code 3. Accessories Shaded items normally in stock. Separable Sockets ¾ NPT External Union Hubs Stem Length REOTEMP INSTRUMENT CORPORATION T 1" A A RETORT THERMOMETERS For Rubber Vulcanizers, Retorts, Coolers, Kettles. 9 Scale Straight or Angle Form, 3 ½ 304 SS Stem, with ¾ NPT 304 S.S. Hub. Range Form Part # 170/270 F & 0/30psi 170/270 F & 0/30psi 80/130 C & 0/2 kg/cm2 80/130 C & 0/2 kg/cm2 200/400 F & 0/200psi 200/400 F & 0/200psi Angle Straight Angle Straight Angle Straight 9RA35F 9RS35F 9RA35C 9RS35C 9RA35FV 9RS35FV Insertion Length Extension Neck Length 3 ½" 2 ½" - 6" 5" - 9" 8" - 6" 2 ½" 2 ½" 9" 5 ½" 2 ½" ¾ NPT External Thread Telephone: (800) FAX (858) sales@reotemp.com U U Brass 304 SS SOC35B SOC35S SOC06B SOC06S SOC09B SOC09S SEN06B SEN06S SEN09B SEN09S UH3B UH3S

16 REGISTERED E R E Filled System Thermometers Vapor Actuated REOTEMP remote Vapor actuated Thermometers are manufactured to the highest standards for a wide range of uses and may be fitted into almost any temperature indicating application. These instruments are ideal for remote reading, such as panel installations, with capillary lengths of 1 to 100 feet. Being vapor actuated, they are not subject to indicator error due to ambient temperature variations along the capillary tube system, and will give excellent readings provided the temperature being measured is above or below ambient temperature. Vapor instruments have progressive graduations, and are best read in the upper 2/3 of the dial range. Many ranges are available between 40 F and +450 F, and care should be exercised to select a range that will locate the operating temperatures within the upper 2/3 of the dial range (see ranges on back page). Specifications: Dial Sizes: 2", 2 ½, 3 ½, 4 ½ Dial: Aluminum with white finish and black markings, other colors available. Pointer: Standard adjustable. Movement: Brass with precision gearing. Bourdon Tube: Phosphor bronze. Accuracy: Plus or minus one scale division. Case: All stainless steel, except: VA45FL (Aluminum) VA45TB (Phenolic). Process Connection: Plain Bulb, 1/2" NPT Union, ½ NPT sliding union on 12" bendable extension, or Thermowell. NOTE: Thermowells must be used whenever the bulb would be exposed to pressure, fluid velocity, or corrosive media Window: Polycarbonate, or Glass. Bulb: Stainless Steel or copper. Bulb O.D. 7/16" (threaded), 3/8" (plain). Bulb lengths vary from 2 ½ to 9 ¼ depending on capillary length. Capillary: Copper, copper with bronze braid armor, stainless steel, stainless steel with stainless steel armor. Capillary lengths 1 to 100 feet (standard length 5 feet). Ranges: Over twenty F and F/ C ranges available, from 40 to F (see illustration, back page). Applications: Control panels, chemical processing, pipelines, food processing, OEM applications, ovens, solar heating, refrigeration, etc. 17

17 Filled System Thermometers Vapor Actuated - Model V Vapor Actuated Case Style & Size (Table 1) Table 1 - Case Style Front Flanged (Panel Mount) Code Dial Case Lens Connection Location 2" SS Polycarbonate* Rear 2 1/2" SS Polycarbonate* Rear 3 1/2" SS Polycarbonate* Rear 4 1/2" SS Polycarbonate* Rear 20FR 25FR 35FR 45FR 45FL Temperature Range (Table 2) 4 1/2" Capillary & Bulb (Table 3) Capillary Length (in Ft.) (Table 4) Black Aluminum (hinge ring type) Glass Rear Process Connection (Table 5) V 20FR 21 D 05 L2 U-Clamp (Panel Mount) Code Dial Case Lens Connection Location 20UR 25UR 35UR 2" 2 1/2" 3 1/2" SS SS SS Polycarbonate* Polycarbonate* Polycarbonate* Rear Rear Rear Rear Flanged (Panel Mount) Code Dial Case Lens Connection Location 20RR 2" SS Polycarbonate* Rear 35RR 3 1/2" SS Polycarbonate* Rear 35RB 3 1/2" SS Polycarbonate* Bottom 45RR 4 1/2" SS Polycarbonate* Rear 45RB 4 1/2" SS Polycarbonate* Bottom 45TB 4 1/2" Phenolic Glass** Bottom (Turrent Mount) Other Case Styles *Glass lens available, specify Glass Lens **Polycarbonate, lens available, specify Poly Lens Code Dial Case Lens Connection Location* 35SB 3 1/2" SS Polycarbonate Adjustable Bracket 45SB 4 1/2" SS Polycarbonate Mount 35DA 3 1/2" SS Polycarbonate "Direct" adj. Mount 45DA 4 1/2" SS Polycarbonate w/3.4 Cu bulb, 1/2" NPT* *Specify Model & Range Only. Example: V45DA REOTEMP INSTRUMENT CORPORATION Telephone: (800) FAX (858) sales@reotemp.com

18 REGISTERED E R E Filled SystemThermometers Vapor Actuated - Table 2 -- Temperature Ranges Code F Ranges Code F and C Ranges * 70* -40 TO 60 F TO 60 F & -40 TO 15 C -40 TO 110 F TO 110 F & -40 TO 40 C -20 TO 120 F TO 120 F & -30 TO 50 C 0 TO 180 F 73 0 TO 180 F & -20 TO 80 C & 0 TO 150 F 79 0 TO 150 F -15 TO 65 C & 20 TO 220 F TO 220 F 0 TO 105 C & 40 TO 240 F TO 240 F & 0 TO 115 C 0 TO 250 F 57 0 TO 250 F & -20 TO 120 C 30 TO 300 F 61* 30 TO 300 F & 0 TO 150 C 100 TO 350 F 66* 100 TO 350 F & 40 TO 175 C 200 TO 450 F 71* 200 TO 450 F & 100 TO 230 C Table 5 -- Process Connection Thermowells For Vapor Actuated Bulbs (except M2) Bulb Configurations Table 3 -- Capillary & Bulbs Code A C D E Capillary & Bulb Material Capillary Protection Copper None Copper Bronze Braid 316 SS None 316 SS S.S. Armor Note: Capillary Lengths over 5 feet affect bulb length. See table at bottom of page. Code Connection Type Material J1 J2 None (Plain Bulb) Jam Nut Only Brass - (For Existing Brass Well) J3 Jam Nut Only 316 SS - (For Existing Stainless Well) K2 1/2" NPT Union Brass L2 1/2" NPT Union 316 SS M2 1/2" NPT Sliding Union on Bendable Extension 316 SS - (Only Avail. with 316 SS Capillary) Brass 316 SS For 1-10 ft. Capillary (bulb #1) For ft. Capillary (bulb #2) For ft. Capillary (bulb #3) For ft. Capillary (bulb #4) For ft. Capillary (bulb #5) *Ranges over 300 come with 316SS Capillary only. 12B 22B 32B 42B 52B Table 4 -- Capillary Length Specify Length in feet. Standard Length = 5 Ft. Available Capillary Length: 1-100Ft. 1/2 NPT 3/4 NPT 1/2 NPT 3/4 NPT 13B 23B 33B 43B 53B 12S 22S 32S 42S 52S 13S 23S 33S 43S 53S L Plain Bulb D S U D Union Connection 12" L S Bendable Extension D S U Thermowell D Standard Bulb Dimensions (inches) CAPILLAR PLAIN BULB UNION CONNECTION THERMOWELL BENDABLE EXT. LENGTH L D U S D U S D L S D 2 1 /2 (1-5ft.) 1-10 ft. (bulb #1) / / /8 / / / /2 (1-5ft.) 3-13 /16 3 /8 /16 (6-10ft) 3 7 /16 (6-10ft) ft. (bulb #2) 3 7 /16 3 /8 2 1 / /4 / / /8 / / / ft. (bulb #3) 4 7 / ft. (bulb #4) 7 7 / ft. (bulb #5) 10 7 /8 3 /8 4 1 /2 5 1 /4 3 /8 6 1 /2 7 1 /4 3 /8 8 1 /2 9 1 /4 7 / /8 5 3 /8 7 / /8 7 3 /8 7 / /8 9 3 /8 9 / / / / / / /8 3 /8 3 /8 19

19 Filled System Thermometers Vapor Actuated Dial Faces Typical dial faces shown below; complete list shown on page 19. Operating temperatures should be in upper 2/3 of selected range. No. 21 C F No. 31 C F No. 51 C F No. 61 C F No. 66 C F No. 73 C F No. 79 C F No. 81 C F For Temperatures above or below those shown, ask for information on REOTEMP Gas Actuated Thermometers. Case and Mounting Dimensions (inches) Front Flange U-Clamp Rear Flange 20 Dial Sizes A B C D E F G H J 2" R R /2" R /2" R RF 2.16R /2" 5.88FR 6.31FL 5.88RR,RB 5.83TB 2.69R 4.59FR 47RR, RB, FL.75UC, FF 1.41RF.75UC, FF 2.56TB 1.63FL 2.69R REOTEMP INSTRUMENT CORPORATION Telephone: (800) FAX (858) sales@reotemp.com

20 REGISTERED E R E Filled System Thermometers Gas Actuated REOTEMP Gas Actuated Thermometers combine advanced gas coil technology with a state-of-the-art adsorbent (Class IV) thermal system, producing superior temperature measurement instrument that can be fitted to a wide variety applications Features include high accuracy, low ambient error, no head error, and a high degree of over-range protection. The compact (3/8 dia. x 3 active length) bulb, and a wide range of case styles and thermal systems, allow great flexibility in installation. The linear dial on all REOTEMP gas thermometers provides a consistent 1% accuracy across the full span of each range. This, combined with over twenty Fahrenheit and dual ranges, from -320 F to F, provides complete coverage of all normal temperature requirements. Specifications Accuracy: +/- 1 % of full scale. Calibration to NIST traceable standards. Ranges: Twenty F and F & C ranges available from -320 F to 1200 F. Overrange: Minimum 50% of span above top of range, or 1300 F, whichever is less. Ambient Error: 1/4% of span per 25 F change in ambient temperature at midscale. Dial Sizes: 41/2"& 6". Dials are white with black markings. Case Materials: Stainless steel, Phenolic, or Aluminum. Case Styles: Panel Mount, Surface Mount, or Direct (stem) Mount. Windows: Glass is standard. Shatterproof glass and acrylic are optional. Pointers: Slotted adjustable type to permit zeroset adjustments. Bulbs: 316 Stainless Steel, 3/8" dia. x 3" active length. Other diameters and lengths are available. Process Connections: Plain bulb; 1/2" NPT sliding union; 1/2" NPT fixed (on All-Angle); or thermowell. Note: Thermowells should be used whenever the bulb would be exposed to pressure, fluid velocity, or corrosive or abrasive media. Thermal Systems: Stainless steel capillary with stainless steel spring armor (up to 40ft). Over 40 feet, stainless steel interlock armor is standard. Direct mount stems, 316 SS, 4" to 48". 21

21 Filled System Thermometers Gas Actuated - Table 1 Case Size & Style Table 2 Thermal System & Bulb Table 3 Capillary Length (feet) Table 4 Temperature G L X Table 5 Options G 4 5 E R 8 7 L 1 5 F B X A W Table 1-Case Style Wall Mount ( E or K case) CASE CODE CASE DIAMETER CONNECTION Panel Mount ( F, S or U case) E Case Phenolic Turret Mount 3 HOLES G DIA. ON H BOLT CIRCLE A D C B E F G45ER 4 1 /2" REAR G45EL 4 1 /2" LOWER G45FR 4 1 /2" REAR G60FR 6" REAR A 3 HOLES G DIA. ON H BOLT CIRCLE.44 B F D F Case Aluminum Front Flange Hinge Ring K Case S.S., Back Flange 3 HOLES G DIA. ON H BOLT CIRCLE A Direct Mount ( D case) C.75 B G45KR 4 1 /2" REAR G45KL 4 1 /2" LOWER G60KR 6" REAR G60KL 6" LOWER G45SR 4 1 /2" REAR G60SR 6" REAR A 3 HOLES G DIA. ON H BOLT CIRCLE C F B D S Case S.S., Semi- Flush Front Flange D Case S.S., All-Angle Direct Mount 360 ROTATION A B E 180 ROTATION G45DA 4 1 /2" ADJUST G60DA 6" ADJUST A D U Case S.S., U-Clamp G45UR 4 1 /2" REAR G60UR 6" REAR.88 PANEL.5 MAX THK 22 Case Dimensions Case Size Case Type A B C D E F G H 4 1 /2" E Turret Phenolic /2" F Front Flange /2" K Back Flange /2" S Semi-Flush /2" D All Angle /2" U U-Clamp " F Front Flange " K Back Flange " S Semi-Flush " D All Angle " U U-Clamp REOTEMP INSTRUMENT CORPORATION Telephone: (800) FAX (858) sales@reotemp.com

22 REGISTERED E R E Filled System Thermometers Gas Actuated Table 2-Thermal Systems (all bulbs & capillaries are 316 SS) CODE DESCRIPTION All Angle Direct Mount with 1/2 NPT (with D case only) All Angle Bulb Stem Length stem x 3/8 diameter 6 stem x 3/8 diameter.38 DIA. 09 0X 9 stem x 3/8 diameter 12 or longer stem x 3/8 dia. - specify stem length EXAMPLE: G45DA - 0X - 12 FB 1/2" NPT 3" Active Length 11 Plain Bulbs Plain bulb, 3/8 x 3 active, + 12 rigid extension #11 bulb ARMOR #12 bulb.38 DIA. EXT/316, S.S. 12" ARMOR BULB/316, S.S. 3" Active Length.38 DIA. 12 Plain bulb, 3/8 x 3 active REINFORCING SPRING, S.S 3" Active Length.38 DIA. Sliding 1/2 NPT on Bendable Extension Bendable Extension 1/2" NPT 87 3/8 x 3 active, 12 bendable extension.38 DIA. 88 8X 3/8 x 3 active, 18 bendable extension 3/8 x 3 active, over 18 bendable (Specify) Extension Length 3" Active Length Table 3-Capillary Length Specify Armored Capillary Length in Feet, up to 99 ft. (omit for D case). L05 = 5 feet L10 = 10 feet L15 = 15 feet etc. Note: Stainless steel spring armor is standard protection on all capillary. Capillary over 40 feet requires XSI Spiral Interlock Armor option. Table 4-Temperature Ranges CODE F RANGES DIV. FB -320/100 F 5 FE -120/120 F 2 FG -40/180 F 2 FH 0/120 F 1 FJ 60/120 F 1 FL 20/240 F 2 FN 0/300 F 5 FP 50/550 F 5 FR 50/750 F 5 FT 400/1200 F 10 CODE F & C RANGES DIV. DB -320/100 F / -200/40 C 5 /2 DE -120/120 F / -85/50 C 2 /1 DG -40/180 F / -40/80 C 2 /2 DH 0/120 F / -15/50 C 1 /1 DJ 60/120 F / 15/5 0C 1 / 1 /2 DL 20/240 F / -5/110 C 2 /1 DN 0/300 F / -10/150 C 5 /1 DP 50/550 F / 10/290 C 5 /5 DR 50/750 F / 0/400 C 5 /5 DT 400/1200 F / -200/650 C 10 /5 Note: C Ranges available on request 23

23 Filled System Thermometers Gas Actuated Table 5 - Accessories & Options Code XAW XSG XMH XMM XFR XBF XCF XSI XVD XTW Description Acrylic Window (4 1 /2" Cases only; not available in F Case). Safety Glass Window (4 1 /2" Cases only; not available in F Case). Maximum or Minimum Hand. Maximum and Minimum Dual Hands. Flush Mounting Ring for E Case. 1/2" NPT Fitting for #11 Bulb - Fits on Bulb or extension. 1/2" NPT Fitting - Fastens on spiral interlock armor (requires XSI option). Spiral Interlock Armor (required over 40 feet). Vibration Dampening feature (dampens vibration - available in all rear connected models). Thermowell (see thermowell table below for order codes). Thermowells for 3/8 dia. Elements Standard Wells External Stem Insert Order Thread length Length Code P A" U" 304 s.s. 316 s.s / / /4" NPT 9 7 1/ / / / / External Stem Insert Lag Order Thread length Length Ext. Code P A" U" T" 304 s.s. 316 s.s. 3/4 NPT Lagging Wells 2 1/2 4 1/2 7 1/2 10 1/2 13 1/2 16 1/ / / " NPT 9 7 1/ / / / / STEM LENGTH A.385 DIA 1 /2" NPSM STEM LENGTH A 1 /2" NPSM 24 Specify TW Plus Order Code Example: TW-146 REOTEMP INSTRUMENT CORPORATION Telephone: (800) FAX (858) sales@reotemp.com

24 REGISTERED E R E Filled Systems Thermometers Direct Drive Gas Actuated Available in Four styles 45GW WALL MOUNTED 45GF FLUSH MOUNTED 45GFF FRONT FLANGE 45GAW ADJUSTABLE WALL Specifications CASE: DIAL FACE: LENS: POINTER: CAPILLAR: BULB: ACTUATION: ACCURAC: Stainless Steel (SS) 4 1/2" Satin Finish Aluminum, Black Lines and Numbers. Gasket Sealed Glass (Plexi Glass Optional) Micrometer Adjustment Type SS Protected by 1/4" Dia. Flexible SS Armor or 3/16" Dia. Plain Armor SS Welded Construction Nitrogen thru SS Direct Drive Bourdon Coil +/- 1 % of Range Span REOTEMP s Rugged Direct Drive System makes our 45G series gas actuated series the right choice for temperature indication in heavy duty or high vibration applications. Its all-stainless steel case and internals, along with the direct drive system, result in superior instrument life in severe environments. NITROGEN FILLED DIRECT DRIVE SSTEM Temperature Ranges Celsius Ranges Fahrenheit Ranges /100 C /100 C 02-30/60 C 04-10/80 C 05-30/120 C 06-10/150 C 07 0/100 C 08 0/200 C 09 0/240 C 10 0/300 C 11 0/400 C /400 C 13 0/500 C 14 0/600 C 39 0/50 C /150 F /100 F 19-40/120 F 20-40/200 F 21 0/100 F 23 0/150 F 24 25/125 F 25 0/200 F 26 0/240 F 27 0/300 F 30 0/400 F 31 0/500 F 32 0/600 F /750 F 34 0/800 F 36 0/1200 F 38 20/240 F 25

25 Filled Systems Thermometers Direct Drive Gas Filled Remote Case Specifications Model 45GW Wall Mounted Complete with Bracket Model 45GAW Adjustable Wall Mounted Complete with Flange Model 45GF Flush Mounted Complete with U - Bracket Model 45GFF Flush Mounted Complete with U - Bracket G1 Bulbs G2 12 3/8 dia. bulb with 3/16 bendable complete with 1/2 NPT compression fitting; All SS 3/8 dia. bulb with 3/8 extension up to 48 with optional 1/2 NPT compression fitting; All SS 45GW G118 45SG 45GW = 45GF = 45GFF = 45GAW = Model Wall Mount Flush Mount Front Flange Adjustable Wall Mount Armored Capillary Length 05 = 5 Feet 06 = 6 Feet 10 = 10 Feet Other = Specify Length in Feet Temperature Range See chart on Page 25. Bulb Type G112 = 12" Bendable Extension with 1/2" NPT Union G118 = 18" Bendable Extention with 1/2" NPT Union G212 = 12" Plain Bulb with Rigid Extension G224 = 24" Bendable Extension with 1/2" NPT Union Accessories for Thermowells see pg. 24 EC = Electrical Contacts MP = Max Hand Pointer SG = Tempered Glass PC = Polycarbonate Crystal 26 REOTEMP INSTRUMENT CORPORATION Telephone: (800) FAX (858) sales@reotemp.com

26 REGISTERED E R E Filled Systems Thermometers Direct Drive Gas & Liquid Filled REOTEMP s Rugged Direct Drive System makes our 45GR and 45LR the right choice for temperature indication in heavy duty or high vibration applications. Its all-stainless steel case and internals, along with the direct drive system, result in superior instrument life in severe environments. EVER ANGLE MODEL 45LR Specifications: CASE: DIAL FACE: LENS: POINTER: BULB: ACTUATION: ACCURAC: Stainless Steel (SS) 4 1/2" Satin Finish Aluminum, Black Lines and Numbers Gasket Sealed Glass (Polycarbonate Optional) Micrometer Adjustment Type SS Welded Construction 45 LR - Inert Liquid thru SS Direct Drive Bourdon Coil (For *ranges, Nitrogen thru SS), Direct Drive Bourdon Coil. 45GR - Nitrogen thru SS Direct Drive Bourdon Coil. +/- 1 % of Range Span MODEL 45GR 45GR ST6 316 Model 45GR = Gas Actuated 3/8" Stem 45LR = Inert Liquid Actuated, 1/4" Stem Armored Capillary Length Temperature Range Accessories 02 = 2 1/2" (LR Only) Standard Thermowells (3/4"NPT, 316SS) 04 = 4" 06 = 6" Stem Length "U" Dim. 1/4" element 3/8" element 09 = 9" 4" 2.5" ST4316 GXTW146 See chart on 12 = 12" Page 25. 6" 4.5" ST6316 GXTW = 15" 9" 7.5" ST9316 GXTW148 (More wells on: p. 14 p. 24 ) EC = MP = Elec. Connection Max Pointer SG = Tempered Glass PC = Plastic Crystal 27

27 Digital Thermometers Hand-Held Thermometers Durable, shock resistant ABS plastic carrying case Easy-to-read, backlighted LCD displays both F and C 28 Features All Solid State High Accuracy Detachable Probes Sealed membrane touch pad Wide Temperature Ranges Specifications: Model TM99A (with disposable battery) Model TC100A (with rechargeable battery) TM99A TC100A Probes for Models: TM99A and TC100A 10K Thermistor Probes All but 2010 and 7041 have 3 handle and 48 coiled lead. Model Description Probe Dimensions 1075 S/S Immersion (comes standard).142" x 4" 1052 S/S Piercing Tip Probe.041" x 2.8" Fast Surface Probe Air Probe.125" x 4" General Purpose.18" x.6" Probe Features All Solid State High Stability Cold Junction Compensation Wide Temperature Ranges Model HI 9063 Water Resistant Min - Max, F/ C HI 9063 Probes for Models: REOTEMP INSTRUMENT CORPORATION Model 701K - Pocket Size Magnet on back - stick it anywhere In Stock in F; Also available C. Telephone: (800) FAX (858) sales@reotemp.com HI 9063 and 701KF Thermocouple Probes (intermediate sizes, or industrial configurations avalaible on application) Probes have 4 handle and min. 36 lead, except where noted. Model Description Probe Dimensions LPK5 Immersion/General Purpose.156" x 5" XPK2 Fast Response (no handle) 1/16" x 12" FRK4 HPK2 REK1 SPK1 LPKA LPK12 MRK36, 48,60 Fast Response 1/16" x 4" Piercing Tip.156" x 4" Soft-wire Disposable (no handle) exposed tip 48" Surface Temperature Gas Temperature Heavy Duty General Purpose 1/4" x 12" Heavy Duty Penetration (pointed) 701KF C/LO Mode: -50 TO 150C with 0.1C Resolution -40F TO +300F Range & C/HI Mode: -50 TO 950C with 1C Resolution (-40C TO +150C) -50 To 1,000F with 1F Resolution Resolution F/LO Mode: -58 TO 302F with 0.1F Resolution 0.1F or C Resolution F/HI Mode: -58 TO 1742F with 1F Resolution Accuracy Greater of ±0.3F, or ±0.5% of reading ±0.3% Full Scale / ±3C (hi), ±0.6C (lo) ±.25%* (±1 Digit) Ambient Range 0 To 150F max, RH -90%, noncondensing -10 TO 50C (14 To 122F) RH 100% 32 TO 104F Display Backlighted.4" LCD Probe # K Thermistor, detachable Type K Thermocouple Type K Thermocouple (Optional) Power TM99A - 9V alkaline battery (provided) 4-1.5V AAA batteries TC100A - 9V NiCad battery with 110V charger 1-9V battery Size 9 1/2" x 6 1/2" x 2 1/2" (case closed) 7.7" x 3.1" x 2.4" (196 x 80 x 60mm) 3.1" x 2.4" x 1.1" (80 x 60 x 33.5mm) 1. Specify Model #. 2. Specify Probe. Hand-Held Thermometer Models Thermistor Models TM99A Disposable Battery TC100A Rechargable Battery "K" Thermocouple Models 701K Compact HI9063 Full Functioned Model # 701K Probe SPK1.40" x 36", 48" or 60"

28 Thermocouples & RTD s REGISTERED E R E RTD s (Resistance Temperature Detectors) How to to Order: Construct part number from table D below. For Thermowell Assembly: Insert part number obtained below into assembly part number on page 31. RTD Styles TABLE D Resistance Temperatures Detectors A standard RTD Assembly may be supplied with an adjustable compression fitting. Specify. Welded 1 / 2 NPT Std. B A standard 1 / 2 x 1 / 2 NPT stainless bushing is welded to the element sheath. 1 / 4 x 1 / 4 and 3 / 4 x 3 / 4 are available. Specify. A quick-disconnect male plug is mounted on the cold end of the element. Two or three prong standard plugs are available. Two prong miniature plugs are available. Specify. A quick-disconnect female jack is mounted on the cold end of the element. Two or three prong standard jacks are available. Two prong miniature jacks are available. Specify. This RTD is terminated with an O ring seal. Canister Head. Spring Loaded 1 / 2 NPT Std. B A standard 1 / 2 x 1 / 2 NPT stainless hex bushing allows the element to be spring-loaded up to 1 / 2. Need something you don t see? Call REOTEMP for information B A B C D E H STEP 1 - RTD Style Choose from Styles table. Insert letter below. (for thermowell assemblies, specify style A ) STEP 2 - Sensor Material (Px is standard) Insert letter designated below. Px - Platinum Ω/Ω/ C P - Platinum Ω/Ω/ C Pl - Platinum Ω/Ω/ C STEP 3 - Temperature Insert single-digit number designated below. 1 (standard) -200 / +400 F (-130 TO +200 C) 2 (hi temp) -200 / F (-130 To +600 C) STEP 4 - Sheath Diameter Insert two-digit number designated be designated below. 18 =.188 dia. 25 =.250 dia. 37 =.375 dia. STEP 5 - Sheath Material N - Nickel Ω/Ω/ C C - Copper Ω/Ω/ C Ba - Balco Insert single-digit number designated below. 1 = 316 SS 3 = 304 SS 5 = INC 600 STEP 6 - Resistance 32 F (0 C) Ohms ±.5% (#1 IS STANDARD) Insert single-digit number designated below. (STD) Platinum - 1 = 100 Ohms 2 = 200 Ohms 5 = 500 Ohms Nickel - 7 = 120 Ohms Copper - 8 = 10 Ohms STEP 7 - Determine the required length L in inches For Thermowell assemblies, specify AR (as required) STEP 8 - Number of Leads/RTD s STEP 9 - Lead Length Special Ranges available on application Single RTD Leads/RTD Duplex RTD W 2-wire WW X 3-wire XX 4-wire Specify lead length B in inches. (Omit for T/W assemblies, or where N/A) 29

29 Thermocouples & RTD s Mineral Insulated Thermocouples How To to Order: Construct part number from table C. For Thermowell Assembly: Insert part number obtained below into assembly part number on page 31. TABLE C Thermocouples STEP 1 Metal Sheathed Thermocouple Assembly - Insert M STEP 2 - Sheath Diameter Insert 2 digit number designated below. 12 =.125in. 18 =.188in 25 =.250 in. 37 =.375in. STEP 3 - ANSI Type Thermocouple Element Insert designation below. K = Chromel Alumel T = Copper Constantan J = Iron Constantan E = Chromel Constantan STEP 4 - Type of Sheath Material Insert single-digit number designated below. 1 = 316 SS 1700 F (927 C) 3 = 304 SS 1650 F (899 C) 2 = 310 SS 2100 F (1149 C) 5 = Inconel F (1149 C) STEP 5 - Style Choose style from Styles Table. Insert letter(s) below. (For thermowell assemblies specify A ) STEP 6 - Number of Element S = Single element assembly D = Dual element assembly STEP 7 - Type of Junction Elements: G = Grounded U = Ungrounded STEP 8 - Probe Length Length L in inches. For complete assembly with thermowell specify AR (as required). M STEP 9 - Specify Lead Length B in inches (omit for thermowell assemblies, or where n/a) Thermocouple Styles Thermocouple Styles B Plain sheath with wire leads. Cold end epoxy sealed. Choose this style for Thermowell assemblies. A Female Mini-plug is mounted to cold end of sheath. Standard size plug available (specify). D Welded 1 / 2 NPT Std. A standard 1/2 x 1/2 NPT stainless bushing is welded to the element sheath. B B Spring Loaded 1 / 2 NPT Std. B A standard 1/2 x 1/2 NPT stainless bushing allows the element to be Spring Loaded up to 1/2". H Male Mini-plug is mounted to cold end of sheath. Standard size plug available (specify). C Need something you don t see? Call REOTEMP for information REOTEMP INSTRUMENT CORPORATION Telephone: (800) FAX (858) sales@reotemp.com

30 REGISTERED E R E Thermocouples & RTD s Thermowell Assemblies Screw Cover Head Table A Below Threaded Connection Table B Below Probe Element Thermocouples - Table C (pg.30) or RTD s - Table D (pg.29) Thermowell Table E (p.32) optional Example: B 1 L M 25 K 3 A S G AR ST4 304 TABLE A Screw Cover Heads UNIVERSAL CAST IRON TPE A Universal head Cast iron Heavy Duty 1/2 NPT process with 3/4 NPT conduit is standard UNIVERSAL CAST ALUMINUM TPE B Universal head Cast aluminum 1/2 NPT process with 3/4 NPT conduit is standard TABLE B CONFIGURATION: Dimensions are approximate. (with thermowell, sheath length L does not have to be specified) Threaded Connection Configuration L 15/8"* 5 / 8 " (Nominal) Head-Bushing Stems are spring loaded* for positive contact with bottom of thermowell. Standard Steel Fittings 1L 316 SS Fittings 1T FDA WHITE POL EXPLOSION PROOF TPE S Screw cover Poly head Impervious to most corrosive media 1/2 NPT process with 3/4 NPT conduit SS Chain & Screws TPE E Explosion Proof Cast aluminum body & cap For use with two wire transmitter Rated for Class I, Groups C, D, Class II, Groups E, F, G, Class III 1/2 NPT process with 1/2 NPT conduit is standard Transmitters - Specify 4-20mA transmitter by adding X to head type. Example: Type B head with Transmitter = BX (specify Temp. Range) Terminal Blocks - Standard in all heads. 2-1/2"* 2 1 / 2 " (Nom.) 3" (Nom.) 3"* L 5 (Nom.) 5"* * For welded SS fittings, substitute F for T Example: 1F Also Available: Head-Nipple L Head-Nipple-Union L Head-Nipple-Union-Nipple 2L 3L 4L 2T 3T 4T Thermocouple Wire Transmitters Multipoint Thermocouple Assemblies Protection Tubes Stainless Steel Fittings 31

31 Thermocouples, RTD s & Accessories Finished Assemblies - Ready to Go Popular Thermocouple & RTD Assemblies Type K or J Thermocouple (single element, ungrounded) Weatherproof Cast Aluminum Screw Cover Head, with Terminal Block 316 SS Bushing, or steel Nipple 1/4" dia. 316 SS Spring-loaded Stems, 4" 6" 9" or 12 Available for fast delivery Head-Bushing Assemblies Head-Nipple-Union-Nipple Assemblies 32 Thermocouples Stem (L) Type K Type J 4" 6" 9" 12" Table E 1 5/8"* B1TM25K1ASU4 B1TM25K1ASU6 B1TM25K1ASU9 B1TM25K1ASU12 RTD s (3-wire, 100 ohm) Stem (L) Model # 4" B1TAPX125114X 6" B1TAPX125116X 9" B1TAPX125119X 12" B1TAPX X L B1TM25J1ASU4 B1TM25J1ASU6 B1TM25J1ASU9 B1TM25J1ASU12 Thermocouples Stem (L) Type K Type J B2LM25K1ASU4 B2LM25K1ASU6 B2LM25K1ASU9 B2LM25K1ASU12 RTD s (3-wire, 100 ohm) Stem (L) Model # 4" B2TAPX125114X 6" B2TAPX125116X 9" B2TAPX125119X 12" B2TAPX X REOTEMP INSTRUMENT CORPORATION Telephone: (800) FAX (858) sales@reotemp.com 4" 6" 9" 12" Thermowells - Common Threaded Thermowells (3/4"NPT external thread). For other similar wells, see complete listing, p. 14. Field- Cuttable Thermocouples & RTD s Adjustable probe length, 2.5" to 18" Probe is cut with simple tube cutter One size fits many - simplify inventory. Thermocouples, Specify: 1. Model (TC-1350 or RTD-1340) 2. Sensor type (K, J, T, E, Etc.) 3. G (grounded) or U(ungrounded) Example: TC-1350-K-G B2LM25J1ASU4 B2LM25J1ASU6 B2LM25J1ASU9 B2LM25J1ASU12 Stem "U" 1/4" DIA. ELEMENTS Stem "U" 3/8" DIA. ELEMENTS Length Dim 304 SS 316 SS Length Dim 304 SS 316 SS 4" 2 1/2" ST4304 ST4316 4" 2 1/2" GTXW046 GTXW146 6" 4 1/2" ST6304 ST6316 6" 4 1/2" GTXW047 GTXW147 9" 7 1/2" ST9304 ST9316 9" 7 1/2" GTXW048 GTXW148 RTD s, specify Model only. Example: RTD-1340 Other Accessories: Model # Description Model # Description TCX 006 A TCX 006 B TCX BSL 22 TCXT4 Cast Iron Head Cast Aluminum Head Spring loaded Bushing TCX 001 T2 TCX 001 T3 TCX 001 T4 Terminal Block, 2-wire Terminal Block, 3-wire Terminal Block, 4-wire 2 Wire Temperature Transmitter, 4-20 ma (specify calibration) 5"* For other similar wells, see complete listing, p. 24. L REGISTERED E R E

32 Thermocouples & RTD s CIP Sanitary RTD s ROETEMP s Santary RTD s are designed for temperature sensing in food, dairy, beverage and pharmaceutical applications where sensor corrosion and product contamination are critical factors. Features: Ideal for CIP (Clean-in-Place) All Sensors Highly Polished to Exceed 3A Requirements Quick-Connect Tri-Clamp Design Fast Response Tip Available Variety of Stem and Termination Options Stem Options Termination Options Standard Stem Type A 3 Immersion X Sensitive Portion 1/2 Connection Head Types S, (or Type T w/transmitter) FDA Compliant White Polypropylene Screw Cover Head (Standard) 1/4 OD, 316L SS S/S Sanitary Cap Reduced Tip Stem Type B, C, E 3 Immersion X 1 1/4 Type L (with Teflon Leads) 316L SS S/S Sanitary Cap E Lead Length (STD. = 6 ) 1/2 NPT 2 1/4 Type D Mini-Stem with T-75 Mini-Cap Type N (with Teflon Leads) 4 1/2 5/32 OD E Lead Length (STD. = 6 ) 2 1/4 3/4 Tri-Clamp X All Stems are Polished 316L SS Other Options Available See Easy guide on page

33 Thermocouples & RTD s CIP Sanitary RTD s R L3 030 A T15 L 12 Table 1 - RTD Type 100 ohm;.00385µ; α 3 wire Accuracy # Elements L3 = 0.10% 1 H3 = 0.01% 1 L6 = 0.10% 2 H6 = 0.01% 2 Maximum temperature: 400 F (204 C) Table 2 - Immersion Length (X) Length Length 020 = 2" 060 = 6" 030 = 3" 090 = 9" 040 = 4" 120 = 12" Long or intermediate lengths OK Please specify length Table 3 - Stem Style (All stems hightly polished to exceed 3-A#09-08). A = B = C = D = E = Description 1/4" Diameter See stem options table pg. 33 Reduced Tip (3/16" tip OD X 3/8" sheath OD) Reduced Tip (1/4" tip OD X 1/2" sheath OD) 5/32" Diameter Tip (with T75 mini-cap only) Single Element Only Special HTST Fast Response Reduced Tip (3/16 tip OD X 3/8" sheath OD, response time 3 to 3.5 sec.) Available in H3 & H6 RTD Type Only. Other Available Options: Alternate Wire Termination Alternate Sanitary Cap Styles Digital Indicating Meters (Suitable for Washdown) Thermocouple Sensors (Sanitary & Industrial) Other REOTEMP CIP Sanitary Products Table 5 - Termination Description S = T = = L = N = Table 4 - Sanitary Cap Tri-Clamp Caps (Triclover 16 AMP Type) Std. White Polypropylene Connection Head (FDA Compliant) White Polypropylene Connection Head with 4-20ma Transmitter White Epoxy Coated Aluminum Head 1/2" OD 316SS transition with (E") Teflon Leads (Specify Length, e.g. 12" = L12) 1/2" NPT 316SS Threaded Fitting with Teflon Lead (Specify Length, e.g. 6" = N6) Description T15 = 1.5" (Standard) T20 = 2" T30 = 3" T75 = 3/4" Fractional (with "D" stem only) Other Cap Styles Available - Please Specify (See Termination Options pg. 33) RTD s with CIP Sanitary Connected Wells Penetration Probes Chemical Resistant Thermocouples Stainless Steel Tags Sanitary Pressure Gauges Sanitary Thermowells Sanitary Bimetal Thermometers Sanitary Pressure Transmitters 34 REOTEMP INSTRUMENT CORPORATION Telephone: (800) FAX (858) sales@reotemp.com

34 REGISTERED E R E Bimetal Thermometers Surface Thermometers Specifications Accuracy - Within 2% of full scale Head - 2 (5.08cm) Dial - White Background, blue marks & numbers Height - 1/2 (1.27cm) Weight - 2 ounces (56.7G) approx. Case - aluminum with optically clear crystal Sensing Element - precision calibrated bimetal coil Response Time - approximately 1 minute Mounting - two Alnico magnets on back Measures Temperature of any Horizontal Surface Magnetic Feet hold to any Ferrous Surface Used on Griddles, Ovens, Motors, Piping, Tanks, etc.. Magnets Front View Protecitive Cover and Heat Collector How How to to Order Order Model # Temperature Ranges SUR-15 0 to 150 F/-20 to 65 C SUR-50 0 to 500 F/-20 to 260 C SUR-25 0 to 250 F/-20 to 120 C SUR to 750 F/10 to 400 C Analog (Dial) Models Back View Bimetal Sensing Element Bimetal Thermometers Pocket Thermometers Digital Pocket Thermometer Model K-79 Model D-450 Accurate & Rugged Quick Response Shock Resistant Sensitive Bimetal Element External Reset Adjustment Waterproof and Dustproof Stainless Steel or Plastic Pocket Case Specifications Accuracy - 1% of Scale Head - 1 Diameter (25mm) Dial - White Background with crisp letters, marks, and numbers. Stem OD, 5 long, pointed (3.6mm x 127mm) Reset Nut - 7/16 Hex (11mm) Pocket Case - Stainless Steel or Plastic with Clip and Holder Loop Weight -.65 ounces (18.5G) Packed - 1 per box, 12 per carton Model # Temperature Ranges Analog K to 160 F K to 220 F K to 125 F K to 550 F K to 110 C K to 150 C K to 250 C Digital D to 450 F D to 302 F Resolution 0.1 F Stainless Steel Stem,.14 x 5 Accuracy 1% of span Comes with Pocket Case 1/4 High LCD Display Also Available: D-302, -58 to 320 F Digital Specifications D-450 D-302 Range -40/450 F -58/302 F Resolution 0.1 F 0.1 F Accuracy ± 0.8% of span ± 1% span Display ¼ LCD ¼ LCD OFF Function 50 Min. Auto Manual Update 10 Seconds 4 Seconds How to 35