About Gaugetech Warranty Trademarks Disclaimer
|
|
- Hillary Manning
- 5 years ago
- Views:
Transcription
1 Product Catalog
2 About Gaugetech Gaugetech is a leading manufacturer/distributor of pressure gauges, temperature instruments and related products serving the petrochemical, pulp and paper, hydraulic industries, HVAC and OEM manufacturers. All Gaugetech products are manufactured to the highest technical specifications with the best materials and labour from sources worldwide. If it carries the Gaugetech name, you can be assured of a quality, long-lasting and reliable product. We have grown to serve the needs of a broad customer base within a wide range of industries. Located in Edmonton, Alberta, Canada, we have become one of western Canada s best sources for quality pressure and temperature instruments. Today we are a total solutions supplier offering quality products, services and support to our many varied and valued customers, while striving to meet and exceed customer expectations with product availability and timely delivery. Browse our catalog for product information and availablity for all of our most popular products and accessories and see why Gaugetech has the solution for your pressure and temperature instrument needs. Warranty Gaugetech warrants products of its manufacture to be free from defects in workmanship and material for a period of one year from the date of shipment to the original purchaser. Gaugetech will repair or replace such product (F.O.B. Factory) should our internal examination reveal it to be defective. Product used in conjunction with non-gaugetech product, or in any way modified or altered, may not be covered under the terms of this warranty. Gaugetech assumes no other responsibility or liability. Trademarks Product names, logos, brands, and other trademarks (ie: Teflon, Delrin, Aflas, Viton ) featured or referred to within this catalog are not owned by Gaugetech Inc., and are the property of their respective trademark holders. Disclaimer Gaugetech products should be carefully selected to meet the demands of the particular application. The information contained in this catalog is offered only as a guide to assist in making the proper product selection. Selection of the proper product, as well as its installation and use, is the sole responsibility of the user. Improper application or product misuse may cause failure of the product, resulting in possible personal injury or property damage. For correct use and application of all Gaugetech products, please refer to the proper standard set forth by ASME. These documents may be obtained from the American Society of Mechanical Engineers (ASME). Visit for more information.
3 Needle Valves GTB Series Needle Valves (Hard Seat) 2 GTH Series Needle Valves (Hard Seat) 4 GTH Series Needle Valves (Soft Seat) 6 GT Series 90 Angle Valves 8 Mini Needle Valves 10 Manifold Valves GT5MSSD 5 Valve Manifold (Soft Seat) 12 GT5M 5 Valve Manifold (Hard Seat) 14 GT5MSSD 5 Valve Flanged Manifold 16 GTHSPM 2 Valve Calibration Manifold 18 Gauge Valves Multi-Port Gauge Valve 20 Chemical Injection Valve 22 Block & Bleed Valve 24 Pressure Gauges Economy Pressure Gauges 26 GTG2510 Series (2.5 /63mm) 28 GTG1518 Series (1.5 /30mm) 30 GTG2518 Series (2.5 /63mm) 32 GTG40 Series (4 /100mm) 34 GTG45 Series (4.5 /115mm) 36 GTG60 Series (6 /123mm) 38 GTG40/45 Series (4 /100mm & 4.5 /115mm) 40 Low Pressure Diaphragm Gauges 42 Differential Pressure Indicators 44 Thermometers Rear Connection Bi-metal Thermometers 46 Adjustable Angle Bi-metal Thermometers 48 Bottom Connection Bi-metal Thermometers 50 Thermowells 52 Dual Magnet Thermometers 54 Glass Pocket Thermometers 54 Bi-metal Pocket Thermometers 55 Accessories Test Bar Manifold 56 In-Line Check Valve 56 Pressure Dampeners (Snubbers) 56 Gauge Siphon 57 Finned Siphon 57 P/T Plugs 58 Diaphragm/Sanitary Seals 58 Overload Protectors 59 1
4 Needle Valves GTB Series Needle Valves Bar stock, hard seat 6,000psi Overview The GTB series bar stock construction needle valves are intended to provide economical and long service life. Valves are available in 316 stainless steel and carbon steel with nickel zinc plate. GTB series are produced in 1/4, 1/2, and 3/4 NPT with malefemale and female-female threaded connections. The GTB packing consists of a Viton O-ring and Teflon back-up ring. Features All bonnets are assembled with a locking pin to prevent accidental removal while in service. The stem thread are rolled and lubricated to prevent galling and reduce operating torque. Stem packing below the threads prevents lubricant washout and ensures no process contamination. This ensures smooth valve operation and long service life. Body to bonnet seal is metal to metal in constant compression, creating a reliable seal point to eliminate possible tensile breakage of bonnet and isolate the bonnet threads from process fluid corrosion. Dust caps are fitted to contain stem lubricant and prevent the ingress of contaminants. Low torque operating T-bar handle All valves are hydrostatically tested to 1.5 times maximum working pressure (9000psi) prior to shipment. The valves are Mill Test traceable. How to order Part Number Connections Material Max W.P. Inlet Outlet GTB12MFC 1/2 MNPT 1/2 FNPT A108 carbon steel 6, F GTB12FFC 1/2 FNPT 1/2 FNPT A108 carbon steel 6, F Bottom Mount: GTG1518A + Range Code Center GTB3412MFC Back Mount: GTG1518D 3/4 MNPT + Range 1/2 Code FNPT A108 carbon steel 6, F GTB12MFSS 1/2 MNPT 1/2 FNPT 316SS 6, F GTB12FFSS 1/2 FNPT 1/2 FNPT 316SS 6, F GTB3412MFSS 3/4 MNPT 1/2 FNPT 316SS 6, F GTB14MFC 1/4 MNPT 1/4 FNPT A108 carbon steel 6, F GTB14FFC 1/4 FNPT 1/4 FNPT A108 carbon steel 6, F GTB14MFSS 1/4 MNPT 1/4 FNPT 316SS 6, F GTB14FFSS 1/4 FNPT 1/4 FNPT 316SS 6, F 2
5 GTB Series Needle Valves Bar stock, hard seat 6,000psi Dimensions Needle Valves 1/2 NPT 74 1/2 MXF 70 1/2 FXF 1/4 NPT 57 1/4 MXF 57 1/4 FXF NO. DESCRIPTION 316SS A108 CARBON STEEL 1 BODY No. Description S SS A108 carbon steel A108 CARBON STEEL 2 1 BONNET Body S316 S316 A108 carbon steel A108 CARBON STEEL 3 STEM 2 Bonnet S316 S316 A108 carbon steel S316 4 HANDLE 3 Stem S303 S316 S316 A108 CARBON STEEL 5 4 Handle FIXING SCREW S302 S303 A108 carbon steel A108 CARBON STEEL 6 5 Fixing Screw S302 A108 carbon steel LOCK PIN S303 A108 CARBON STEEL 6 Lock Pin S303 A108 carbon steel 7 O-RING VITON VITON 7 O-ring Viton Viton 8 BACK-UP RING TEFLON TEFLON 8 Back-up ring Teflon Teflon 9 DUST CAP NBR NBR 9 Dust cap NBR NBR 10 MOUNTABLE NUTS* S Mountable Nuts* A108 CARBON STEEL S316 A108 carbon steel *OPTIONAL *Optional Drawings are not to scale. Dimensions in millimeters. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
6 Needle Valves GTH Series Needle Valves Hex stock, hard seat 6,000 and 10,000 psi Overview The GTH series are machined from hexagonal bar stock and supplied in 316 stainless steel and carbon steel with nickel zinc plate. GTH series are produced in 1/2 and 3/4 NPT with male-female and female-female threaded connections. The GTH series are designed with a metal seat for severe working conditions. Features Non-rotating stem plug moves axially into and out of the seat without rotation to eliminate seat galling. The stem threads are rolled and lubricated to prevent galling and reduce operating torque. Valves are assembled with standard T-bar handles. All bonnets are assembled with a locking pin to prevent accidental removal while in service. Teflon packing can be adjusted to increase valve life. Stem packing below the threads prevents lubricant washout and ensures no process contamination. The valves feature safety back seating to ensure a secondary stem seal. Dust caps are fitted to contain stem lubricant and prevent the ingress of contaminants. All valves are hydrostatically tested to 1.5 times maximum working pressure prior to shipment. The valves are Mill Test traceable. How to order Part Number Connections Material Max W.P. Inlet Outlet GTH12MSS 1/2 MNPT 1/2 FNPT 316SS 6, F GTH12FFSS 1/2 FNPT 1/2 FNPT 316SS 6, F GTH12MFSS10 1/2 MNPT 1/2 FNPT 316SS 10, F GTH12FFSS10 1/2 FNPT 1/2 FNPT 316SS 10, F GTH3412MFSS10 3/4 MNPT 1/2 FNPT 316SS 10, F GTH12MFC 1/2 MNPT 1/2 FNPT A108 carbon steel 6, F GTH12FFC 1/2 FNPT 1/2 FNPT A108 carbon steel 6, F GTH12MFC10 1/2 MNPT 1/2 FNPT A108 carbon steel 10, F GTH12FFC10 1/2 FNPT 1/2 FNPT A108 carbon steel 10, F GTH3412MFC10 3/4 MNPT 1/2 FNPT A108 carbon steel 10, F 4
7 GTH Series Needle Valves Hex stock, hard seat 6,000 and 10,000 psi Dimensions Needle Valves 76 1/2 FXF No. Description 316SS A108 carbon steel 1 Body S316 A108 carbon steel 2 Bonnet S316 A108 carbon steel 3 Stem S316 S316 4 Adjuster S316 A108 carbon steel 5 Lock Nut S316 A108 carbon steel 6 Handle S303 A108 carbon steel 7 Fixing Screw S302 A108 carbon steel 8 Packing Teflon Teflon 9 Washer S316 A108 carbon steel 10 Pusher S316 A108 carbon steel 89 1/2 MXF 89 3/4 MXF 11 Dust Cap NBR NBR 12 Lock Pin S303 A108 carbon steel Drawings are not to scale. Dimensions in millimeters. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
8 Needle Valves GTH Series Needle Valves Hex stock, soft seat 6,000 psi Overview The GTH series are machined from hexagonal Bar stock and supplied in 316 stainless steel and carbon steel with yellow zinc plate. GTH series are produced in 1/2, 3/4 and 1 NPT with malefemale and female-female threaded connections. The GTH soft seat series are designed with a Delrin seat to ensure a tight shut off even in abrasive process conditions. Features Delrin soft seat standard. Rodable straight thru process to instrument orifices. The stem threads are rolled and lubricated to prevent galling and reduce operating torque. Valves are assembled with standard T-bar handles. All bonnets are assembled with a locking pin to prevent accidental removal while in service. Teflon packing can be adjusted to increase valve life. Stem packing below the threads prevents lubricant washout and ensures no process contamination. The valves feature safety back seating to ensure a secondary stem seal. Dust caps are fitted to contain stem lubricant and prevent the ingress of contaminants. All valves are hydrostatically tested to 1.5 times maximum working pressure prior to shipment. The valves are Mill Test Traceable. How to order Part Number Connections Material Max W.P. Inlet Outlet GTH12MFSSD 1/2 MNPT 1/2 FNPT 316SS 6, F GTH12FFSSD 1/2 FNPT 1/2 FNPT 316SS 6, F GTH12MFCD 1/2 MNPT 1/2 FNPT A108 carbon steel 6, F GTH12FFCD 1/2 FNPT 1/2 FNPT A108 carbon steel 6, F GTH34MFSSD 3/4 MNPT 3/4 FNPT 316SS 6, F GTH34FFSSD 3/4 FNPT 3/4 FNPT 316SS 6, F GTH34MFCD 3/4 MNPT 3/4 FNPT A108 carbon steel 6, F GTH34FFCD 3/4 FNPT 3/4 FNPT A108 carbon steel 6, F GTH10MFSSD 1 MNPT 1 FNPT 316SS 6, F GTH10FFSSD 1 FNPT 1 FNPT 316SS 6, F GTH10MFCD 1 MNPT 1 FNPT A108 carbon steel 6, F 6
9 GTH Series Needle Valves Hex stock, soft seat 6,000 psi Dimensions Needle Valves No. Description 316SS C.S. Valve 1 Body S316 C.S 2 Bonnet S316 C.S 3 Stem S316 S316 4 Adjuster S316 C.S 5 Lock Nut S316 C.S 6 Handle S303 C.S Model Dim. A L L1 H H E W GTH12MF 1/2 NPT GTH12FF 1/2 NPT GTH34MF 3/4 NPT GTH34FF 3/4 NPT GTH10MF 1 NPT GTH10FF 1 NPT Fixing Screw S302 C.S 8 Packing Teflon Teflon 9 Locking Pin S303 S Dust Cap NBR NBR 11 Soft Seat Delrin Delrin Drawings are not to scale. Dimensions in millimeters. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
10 Needle Valves GT Series 90 Angle Valves Soft seat 6,000 psi Overview The GT Series 90 Angle Valves series are machined from either bar stock or forged materials and supplied in 316 stainless steel and carbon steel with nickel zinc plate. Our 90 Valves are available in 1/2 Npt and 1/4 NPT with male-female threaded connections. These soft seat valves are designed with a Delrin seat to ensure a tight shut off, even in abrasive process conditions. Features Delrin soft seat standard. The stem threads are rolled and lubricated to prevent galling and reduce operating torque. All bonnets are assembled with a locking pin to prevent accidental removal while in service. Teflon packing can be adjusted to increase valve life. Stem packing below the threads prevents lubricant washout and ensures no process contamination. The valves feature safety back seating to ensure a secondary stem seal. Dust caps are fitted to contain stem lubricant and prevent the ingress of contaminants. All valves are hydrostatically tested to 1.5 times maximum working pressure prior to shipment. The valves are Mill Test Traceable. How to order Part Number Connections Material Max W.P. Inlet Outlet GTMNVFFCS90 1/4 FNPT 1/4 FNPT A108 carbon steel 6, F GTFAMSSD 1/2 MNPT 1/2 FNPT 316SS 6, F 8
11 GTH Series 90 Angle Valves Soft seat 6,000 psi Dimensions Needle Valves GTMNVFFCS90 No. Description 316SS Valve C.S. Valve 1 Body S316 C.S 2 Bonnet S316 C.S 3 Stem S316 S303 4 Handle S316 C.S 5 Fixing Screw S316 C.S 6 O-ring Viton Viton 7 O-ring Viton Viton 8 Back-up ring PTFE PTFE 9 Washer S316 S Soft Seat POM NBR GTFAMSSD No. Description 316SS Valve 1 Body S316 2 Bonnet S316 3 Stem S316 4 Adjuster S316 5 Lock Nut S316 6 Handle S303 7 Fixing Screw S302 8 Packing Teflon 9 Locking Pin S Dust Cap NBR 11 Soft Seat POM Drawings are not to scale. Dimensions in millimeters. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
12 Needle Valves Mini Needle Valves Bar stock, hard and soft seat 3,000 psi Overview Gaugetech mini bar stock construction needle valves are intended to provide an economical solution in situations where full size 1 4 valves would be restricted. Valves are available in 316 stainless steel and carbon steel with nickel zinc plate. With your choice of hard or soft seats, Gaugetech Mini Valves are produced in 1/4 NPT malefemale and female-female threaded connections. Features The stem thread are rolled and lubricated to prevent galling and reduce operating torque. Low torque operating T-bar handle on hard seat. Smooth operating knurled round handle on soft seat. All valves are hydrostatically tested to 1.5 times maximum working pressure (4500 psi) prior to shipment. The valves are Mill Test traceable. Valves are skin packaged for distributor display. How to order Part Number Connections Seat Material Max W.P. Inlet Outlet GTMNVMFCH 1/4 MNPT 1/4 FNPT Hard A108 carbon steel 3, F GTMNVFFCH 1/4 FNPT 1/4 FNPT Hard A108 carbon steel 3, F GTMNVMFSH 1/4 MNPT 1/4 FNPT Hard 316SS 3, F GTMNVFFSH 1/4 FNPT 1/4 FNPT Hard 316SS 3, F GTMNVMFCS 1/4 MNPT 1/4 FNPT Soft A108 carbon steel 3, F GTMNVFFCS 1/4 FNPT 1/4 FNPT Soft A108 carbon steel 3, F GTMNVMFSS 1/4 MNPT 1/4 FNPT Soft 316SS 3, F GTMNVFFSS 1/4 FNPT 1/4 FNPT Soft 316SS 3, F 10
13 Mini Needle Valves Bar stock, hard and soft seat 3,000 psi Dimensions Needle Valves HARD SEAT No. Description 316SS A108 Carbon Steel 1 Body S316 A108 2 Bonnet S316 A108 3 Stem S316 S316 4 Handle S303 A108 5 Fixing Screw S302 A108 6 O-ring Viton Viton 7 O-ring Viton Viton 8 Back-up ring Teflon Teflon 48 1/4 MXF 47 1/4 FXF SOFT SEAT No. Description 316SS A108 Carbon Steel 1 Body S316 A108 2 Bonnet S316 A108 3 Stem S316 S316 4 Handle S303 C.S 5 Fixing Screw S302 A108 6 O-ring Viton Viton 7 O-ring Viton Viton 8 Back-up ring Teflon Teflon 48 1/4 MXF 47 1/4 MXF 9 Washer S316 S Soft Seat Delrin Delrin Drawings are not to scale. Dimensions in millimeters. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
14 Manifold Valves GT5MSSD 5 Valve Manifold Soft seat, pipe to pipe 316SS and A108 Carbon Steel Overview Gaugetech five valve soft seat manifolds are supplied in 316L stainless steel and A108 carbon steel and are produced in 1 2 NPT female-female, pipe to pipe threaded connections. GT5M soft seat series valves are designed with a Delrin seat to ensure a tight shut off even in abrasive process conditions. Features Delrin soft seat standard. Rodable 4.8mm straight thru instrument to process orifice. The stem threads are rolled and lubricated to prevent galling and reduce operating torque. Valves are assembled with standard T-bar handles. All bonnets are assembled with a locking pin to prevent accidental removal while in service. Teflon packing can be adjusted to increase valve life. Stem packing below the threads prevents lubricant washout and ensures no process contamination. The valves feature safety back seating to ensure a secondary stem seal. Dust caps are fitted to contain stem lubricant and prevent the ingress of contaminants. All valves are hydrostatically tested to 1.5 times maximum working pressure prior to shipment. The valves are Mill Test Traceable. How to order Part Number Connections Seat Material Max W.P. Inlet Outlet GT5MSSD 1/2 FNPT 1/2 FNPT soft 316SS 9, F GT5MCD 1/2 FNPT 1/2 FNPT soft A108 carbon steel 3, F 12
15 GT5MSSD 5 Valve Manifold Soft seat, pipe to pipe 316SS and A108 Carbon Steel Dimensions Manifold Valves SOFT SEAT No. Description SS A108 Carbon Steel 1 Body S316L A108 2 Bonnet S316 A108 3 Stem S316 A108 4 Adjuster S316 A108 5 Lock Nut S316 A108 6 Handle S302 A108 7 Fixing Screw S302 A108 8 Packing Teflon Teflon 9 Dust Cap NBR NBR 10 Locking Pin S304 A Soft Seat Delrin Delrin 12 Washer S316 A Soft Seat Delrin Delrin 14 O-ring Aflas Aflas Drawings are not to scale. Dimensions in millimeters. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
16 Manifold Valves GT5M 5 Valve Manifold Hard seat, pipe to pipe 10,000 psi Overview Gaugetech five valve manifolds are supplied in 316L stainless steel and carbon steel with white zinc plate. GT5M series valves are produced in 1 2 NPT femalefemale, pipe to pipe threaded connections. The GT5M series are designed with a metal seat for severe working conditions. Features Non-rotating stem plug moves axially into and out of the seat without rotation to eliminate seat galling. The stem thread are rolled and lubricated to prevent galling and reduce operating torque. Valves are assembled with standard T-bar handles. All bonnets are assembled with a locking pin to prevent accidental removal while in service. Teflon packing can be adjusted to increase valve life. Stem packing below the threads prevents lubricant washout and ensures no process contamination. The valves feature safety back seating to ensure a secondary stem seal. Dust caps are fitted to contain stem lubricant and prevent the ingress of contaminants. All valves are hydrostatically tested to 1.5 times maximum working pressure prior to shipment. The valves are Mill Test Traceable. How to order Part Number Connections Seat Material Max W.P. Inlet Outlet GT5MSSNRT 1/2 FNPT 1/2 FNPT Hard 316SS 10, F GT5MCSNRT 1/2 FNPT 1/2 FNPT Hard A108 carbon steel 10, F 14
17 GT5M 5 Valve Manifold Hard seat, pipe to pipe 10,000 psi Dimensions Manifold Valves HARD SEAT No. Description SS A108 Carbon Steel 1 Body S316 A108 2 Bonnet S316 A108 3 Stem S316 S316 4 Adjuster S316 A108 5 Lock Nut S316 A108 6 Handle S303 A108 7 Fixing Screw S302 A108 8 Packing Teflon Teflon 9 Washer S316 A Pusher S316 A Dust cap NBR NBR 12 Lock pin S303 A108 Drawings are not to scale. Dimensions in millimeters. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
18 Manifold Valves GT5MSSD 5 Valve Flanged Manifold Hard seat, pipe to flange 316SS and A105 Carbon Steel Overview The Gaugetech five valve soft seat flanged manifolds supplied in 316L stainless steel and A105 carbon steel are produced in 1 2 NPT female pipe threaded to flange. The GT5M soft seat series are designed with a Delrin seat to ensure a tight shut off even in abrasive process conditions. Features Delrin soft seat standard Rodable 4.8mm straight thru instrument to process orifice. The stem thread are rolled and lubricated to prevent galling and reduce operating torque. Valves are assembled with standard T-bar handles. All bonnets are assembled with a locking pin to prevent accidental removal while in service. Teflon packing can be adjusted to increase valve life. Stem packing below the threads prevents lubricant washout and ensures no process contamination. The valves feature safety back seating to ensure a secondary stem seal. Dust caps are fitted to contain stem lubricant and prevent the ingress of contaminants. All valves are hydrostatically tested to 1.5 times maximum working pressure prior to shipment. The valves are Mill Test Traceable. How to order Part Number Connections Seat Material Max W.P. Inlet Outlet GTMSSDFLG 1/2 FNPT Flanged Soft 316SS 9, F GT5MCDFLG 1/2 FNPT Flanged Soft A105 carbon steel 3, F 16
19 GT5MSSD 5 Valve Flanged Manifold Hard seat, pipe to flange 316SS and A105 Carbon Steel Dimensions Manifold Valves No. Description SS A105 A105 CARBON STEEL Carbon Steel Body Bonnet Stem S316L A105 A105 S316 A105 S316 A105 A105 A Adjuster Lock Nut Handle Fixing Screw A105 S316 A105 S316 A105 S303 A105 S302 A105 A105 A105 A105 8 Packing Teflon Teflon 9 Dust cap A105 NBR NBR 10 Locking pin S304 A105 A Soft seat POM POM 12 Washer S316 A Soft seat POM POM 14 O-ring Aflas Aflas Drawings are not to scale. Dimensions in millimeters. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
20 Manifold Valves GTHSPM 2 Valve Calibration Manifold Soft seat, pipe to pipe 316SS and A108 Carbon Steel Overview Gaugetech two valve manifolds are supplied in 316L stainless steel are produced in 1 2 NPT female-female, pipe to pipe threaded connections. GTH soft seat series valves are designed with a Delrin seat to ensure a tight shut off even in abrasive process conditions. Features Delrin soft seat standard. The stem threads are rolled and lubricated to prevent galling and reduce operating torque. Valves are assembled with standard T-bar handles. All bonnets are assembled with a locking pin to prevent accidental removal while in service. Teflon packing can be adjusted to increase valve life. Stem packing below the threads prevents lubricant washout and ensures no process contamination. The valves feature safety back seating to ensure a secondary stem seal. Dust caps are fitted to contain stem lubricant and prevent the ingress of contaminants. All valves are hydrostatically tested to 1.5 times maximum working pressure prior to shipment. The valves are Mill Test Traceable. How to order Part Number Connections Seat Material Max W.P. Inlet Outlet GTHSPM12SSD 1/2 FNPT 1/2 FNPT Soft 316SS 3, F GTHSPM12CD 1/2 FMPT 1/2 FNPT Soft A108 3, F 18
21 GTHSPM 2 Valve Calibration Manifold Soft seat, pipe to pipe 316SS and A108 Carbon Steel Dimensions Manifold Valves SOFT SEAT No. Description Stainless Steel A108 Carbon Steel 1 Body S316L A108 2 Bonnet S316 A108 3 Stem S316 A108 4 Adjuster S316 A108 5 Lock Nut S316 A108 6 Handle S303 A108 7 Fixing Screw S302 A108 8 Packing Teflon Teflon 9 Dust cap NBR NBR 10 Locking pin S304 A Soft seat Delrin Delrin 12 Washer S316 A O-ring Aflas Aflas Drawings are not to scale. Dimensions in millimeters. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
22 Gauge Valves Multi-Port Gauge Valves With optional bleed valve 316S and Carbon Steel, 1/2 and 3/4 NPT Overview Gaugetech multi-port gauge valves are supplied in 316L stainless steel and carbon steel with white zinc plate. GTMPGV series valves are produced with a 1 2 or 3/4 MNPT process connection with female 1 2 NPT Ports. The GTMPGV series are designed with a metal seat for severe working conditions. All multi-port valves come standard with reduced necks. The optional GTBV NPT bleed valve may be ordered as required. Features Non-rotating stem plug moves axially into and out of the seat without rotation to eliminate seat galling. The stem thread are rolled and lubricated to prevent galling and reduce operating torque. Valves are assembled with standard t-bar handles. All bonnets are assembled with a locking pin to prevent accidental removal while in service. Teflon packing can be adjusted to increase valve life. Stem packing below the threads prevents lubricant washout and ensures no process contamination. The valves feature safety back seating to ensure a secondary stem seal. Dust caps are fitted to contain stem lubricant and prevent the ingress of contaminants. All valves are hydrostatically tested to 1.5 times maximum working pressure prior to shipment. The valves are Mill Test Traceable. How to order Part Number Connections Seat Material Max W.P. Inlet Ports Gauge Valves GTMPGV12SH 1/2 MNPT 1/2 FNPT Hard 316SS GTMPGV12SH10 1/2 MNPT 1/2 FNPT Hard 316SS GTMPGV12CH 1/2 MNPT 1/2 FNPT Hard A108 carbon steel GTMPGV34SH 3/4 MNPT 1/2 FNPT Hard 316SS 6, F 10, F GTMPGV34SH10 3/4 MNPT 1/2 FNPT Hard 316SS Bleed Valves GTBV12 1/2 MNPT N/A N/A 316SS Hex Plug GTHP12 1/2 MNPT N/A N/A 316SS 20
23 Multi-Port Gauge Valves With optional bleed valve 316S and carbon steel, 1/2 and 3/4 NPT Dimensions Gauge Valves HARD SEAT NO. DESCRIPTION 316 SS No. 1 BODY Description S316 SS A108 CARBON STEEL A108 A108 Carbon Steel 2 BONNET S316 A108 1 Body S316 A108 2 Bonnet S316 A108 3 Stem S316 S316 4 Adjuster S316 A108 5 Lock Nut S316 A108 6 Handle S303 A108 7 Fixing Screw S302 A108 8 Packing Teflon Teflon 9 Washer S316 A Pusher S316 A Dustcap NBR NBR 12 Locking pin S303 A108 Drawings are not to scale. Dimensions in millimeters. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
24 Gauge Valves Chemical Injection Reversed Multi-Port Valve Hard seat, 316SS, 1/2 NPT ports Overview The Gaugetech chemical injection valve has all the features of our multi-port gauge valve. The ports are reversed for special field applications which in turn can reduce the use of other valves when used instead of a standard multiport valve. GTMPCIV series are produced with a 1 2 MNPT process connection with female 1 2 NPT Ports. The GTMPCIV series are designed with a metal seat for severe working conditions. Features Non-rotating stem plug moves axially into and out of the seat without rotation to eliminate seat galling. The stem thread are rolled and lubricated to prevent galling and reduce operating torque. Valves are assembled with standard T-bar handles. All bonnets are assembled with a locking pin to prevent accidental removal while in service. Teflon packing can be adjusted to increase valve life. Stem packing below the threads prevents lubricant washout and ensures no process contamination. The valves feature safety back seating to ensure a secondary stem seal. Dust caps are fitted to contain stem lubricant and prevent the ingress of contaminants. All valves are hydrostatically tested to 1.5 times maximum working pressure prior to shipment. The valves are Mill Test Traceable. How to order Part Number Connections Seat Material Max W.P. Inlet Ports GTMPCIV12SH 1/2 MNPT 1/2 FNPT Hard 316SS 10, F 22
25 Chemical Injection Reversed Multi-Port Valve Hard seat, 316SS, 1/2 NPT ports Dimensions Gauge Valves HARD SEAT No. Description SS A108 Carbon Steel 1 Body S316 A108 2 Bonnet S316 A108 3 Stem S316 S316 4 Adjuster S316 A108 5 Lock Nut S316 A108 6 Handle S303 A108 7 Fixing Screw S302 A108 8 Packing Teflon Teflon 9 Washer S316 A Pusher S316 A Dustcap NBR NBR 12 Locking pin S303 A108 Drawings are not to scale. Dimensions in millimeters. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
26 Gauge Valves Block & Bleed Valves Hard seat, 316SS, 1/2 NPT Overview Gaugetech Block & Bleed Valves are supplied in 316L stainless steel. GTHBB series valves are produced with a 1 2 MNPT process connection with female 1 2 NPT instrument connection. GTHBB series valves are designed with a metal seat for severe working conditions. All block & bleed valves come standard with 1 4 NPT side drain port. Features Non-rotating stem plug moves axially into and out of the seat without rotation to eliminate seat galling. The stem thread are rolled and lubricated to prevent galling and reduce operating torque. Valves are assembled with standard t-bar handles. All bonnets are assembled with a locking pin to prevent accidental removal while in service. Teflon packing can be adjusted to increase valve life. Stem packing below the threads prevents lubricant washout and ensures no process contamination. The valves feature safety back seating to ensure a secondary stem seal. Dust caps are fitted to contain stem lubricant and prevent the ingress of contaminants. All valves are hydrostatically tested to 1.5 times maximum working pressure prior to shipment. The valves are Mill Test Traceable. How to order Part Number Connections Seat Material Max W.P. Inlet Ports GTHBB12MFSS 1/2 MNPT 1/2 FNPT Hard 316SS 6, F GTHBB12MFSS10 1/2 MNPT 1/2 FNPT Hard 316SS 10, F GTHBB12REVFMSS 1/2 FNPT 1/2 MNPT Hard 316SS 6, F 24
27 Block and Bleed Valves Hard seat, 316SS, 1/2 NPT Dimensions Gauge Valves HARD SEAT No. Description SS 1 Body S316 2 Bonnet S316 3 Stem S316 4 Adjuster S316 5 Lock Nut S316 6 Handle S303 7 Fixing Screw S302 8 Packing Teflon 9 Washer S Pusher S Dust cap NBR 12 Locking pin S303 Model Dim. A B L H H1 W GTHBB12MFSS 1/2 NPT GTHBB12MFSS10 1/2 NPT GTHBB12REVFMSS 1/2 NPT Drawings are not to scale. Dimensions in millimeters. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
28 Pressure Gauges Economy Pressure Gauges Applications Gaugetech economy (utility) gauges are an inexpensive alternative for the broad commercial and industrial market. These gauges provide 3-2-3% accuracy for measuring water, oil, gas, or any medium not corrosive to brass or phosphor bronze. Specifications Ranges Refer to chart Dial Size 1.5, 2, 2.5, 4.5 Accuracy 3-2-3% Case Black painted steel (dry only) Socket Phosphor bronze bourdon tube and brass socket Lens Glass Connection 1/8 NPT available on 1.5 and 2 dial sizes 1/4 NPT available on 2, 2.5 and 4.5 dial sizes Bottom or center back connections available on 1.5, 2 and 2.5 dial sizes 4.5 dial size available with bottom connection only How to order Dial Size Connection Location bottom back back bottom back bottom back bottom Connection NPT 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4 Ranges (in stock): 0-15 psi and kpa UT-1004L-09 UT-1004B-09 UT-2004B-09 MI MI-50D-09 MI MI-63D-09 MI psi and kpa UT-1004L-10 UT-1004B-10 UT-2004B-10 MI MI-50D-10 MI MI-63D-10 MI psi and kpa UT-1004L-11 UT-1004B-11 UT-2004B-11 MI MI-50D-11 MI MI-63D-11 MI psi and kpa UT-1004L-12 UT-1004B-12 UT-2004B-12 MI MI-50D-12 MI MI-63D-12 MI psi and kpa UT-1004L-13 UT-1004B-13 UT-2004B-13 MI MI-50D-13 MI MI-63D-13 MI psi and kpa UT-1004L-14 UT-1004B-14 UT-2004B-14 MI MI-50D-14 MI MI-63D-14 MI Other ranges available. Contact Gaugetech for details.
29 Economy Pressure Gauges Dimensions B B -S Pressure Gauges A A C -S C Dial Size Connection A B S D 1.5 1/8 NPT bottom /8 NPT back /8 NPT back /4 NPT bottom /4 NPT back /4 NPT bottom /4 NPT back /4 NPT bottom Dimensions in inches Drawings are not to scale. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
30 Pressure Gauges GTG2510 Series (2.5 /63mm) Brass Internal Pressure Gauges 1 4 NPT Bottom or Center Back Mount Applications Chemical and petrochemical industries, conventional and nuclear power plants, pumps, hydro-cleaning machines, presses, engine compressors, turbines, diesel engines and refrigerating plants, food and beverage, pharmaceutical industries. For measuring water, oil, gas or any medium not corrosive to brass or phosphor bronze Specifications Accuracy ±1.6% of full scale Ambient temperature - 25 C to + 65 C Process temperature Max 100 C (Dry) Max 65 C (Filled) Operating pressure 75% of the scale value Over pressure limit 25% of full scale value Case AISI 304 SS Ring AISI 304 SS, crimped ring Bourdon Tube 316 Phosphor SS Bronze Socket AISI Brass 316L SS Movement AISI Phosphor 304 SS Bronze Dial Aluminum, black & red graduation on white background Pointer Aluminum, black Window Plexiglas Safety Glass Fill Glycerine (standard) Silicone (optional) Halocarbon (optional) Gaskets/Vent/ Neoprene Blow out Plugs Standard Scale psi/kpa (standard), special dials & scales available Connection 1/8 1/4 NPT (standard) How to order Bottom Mount: Center Back Mount: GTG2510A + Range Code GTG2510D + Range Code Panel Mount Accessories: GTFF-2.5: Front Flange 304SS GTUC-2.5: U-Clamp Range Code Range Code Range Code Range Code Hg Hg-15 psi/kpa Hg-30 psi/kpa Hg-60 psi/kpa Hg-100 psi/kpa Hg-150 psi/kpa Hg-200 psi/kpa Hg-300 psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa ,000 psi/kpa 28 Ranges shown in bold are typically stocked in our warehouse.
31 GTG2510 Series (2.5 /63mm) Brass Internal Pressure Gauges 1 4 NPT Bottom or Center Back Mount Dimensions Pressure Gauges Lower Connection Flush Mounting Back Connection Flush Mounting, U-Clamp Back Connection Flush Mounting, Front Flange Back Connection NS A A2 b c d d1 E F I L M N P Accessories Flange: GTFF-2.5 U-Clamp: GTUC-2.5 Drawings are not to scale. Dimensions in millimeters. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
32 Pressure Gauges GTG1518 Series (1.5 /40mm) Stainless Steel Pressure Gauges 1 8 NPT Bottom or Center Back Mount Applications Chemical and petrochemical industries, conventional and nuclear power plants, pumps, hydro-cleaning machines, presses, engine compressors, turbines, diesel engines and refrigerating plants, food and beverage, pharmaceutical industries. Specifications Accuracy ±1.6% of full scale Ambient temperature - 25 C to + 65 C 65 C Process temperature Max 100 C (Dry) Max 65 C (Filled) Operating pressure 75% of the scale value Over pressure limit 25% of full scale value Case AISI 304 SS Ring AISI 304 SS, crimped ring Bourdon Tube 316 SS Socket AISI 316L SS SS Movement AISI 304 SS Dial Aluminum, black & red graduation on white background Pointer Aluminum, black Window Plexiglas Fill Glycerine (standard) Silicone (optional) Halocarbon (optional) Gaskets/Vent/ Neoprene Blow out Plugs Standard Scale psi/kpa (standard), special dials & scales available Connection 1/8 NPT (standard) How to order Bottom Mount: Center Back Mount: GTG1518A + Range Code GTG1518D + Range Code Range Code Range Code Range Code Range Code Hg Hg-30 psi/kpa Hg-60 psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa 30 Ranges shown in bold are typically stocked in our warehouse.
33 GTG1518 Series (1.5 /40mm) Stainless Steel Pressure Gauges 1 8 NPT Bottom or Center Back Mount Dimensions Pressure Gauges NS A B ØC ØD E F NS A B ØC ØD E F Drawings are not to scale. Dimensions in millimeters. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
34 Pressure Gauges GTG2518 Series (2.5 /63mm) Stainless Steel Pressure Gauges 1 4 NPT Bottom or Center Back Mount Applications Chemical and petrochemical industries, conventional and nuclear power plants, pumps, hydro-cleaning machines, presses, engine compressors, turbines, diesel engines and refrigerating plants, food and beverage, pharmaceutical industries Specifications Accuracy ±1.6% of full scale Ambient temperature - 25 C to 65 C + 65 C Process temperature Max 100 C (Dry) Max 65 C (Filled) Operating pressure 75% of the scale value Over pressure limit 25% of full scale value Case AISI 304 SS Ring AISI 304 SS, crimped ring Bourdon Tube AISI 316 SS 316 SS Socket AISI 316L SS SS Movement AISI 304 SS Dial Aluminum, black & red graduation on white background Pointer Aluminum, black Window Safety Plexiglas Glass Fill Glycerine (standard) Silicone (optional) Halocarbon (optional) Gaskets/Vent/ Neoprene Blow out Plugs Standard Scale psi/kpa (standard), special dials & scales available Connection 1/4 1/8 NPT (standard) How to order Bottom Mount: Center Back Mount: GTG2518A + Range Code GTG2518D + Range Code Panel Mount Accessories: GTFF-2.5: Front Flange 304SS GTUC-2.5: U-Clamp Range Code Range Code Range Code Range Code Hg Hg-15 psi/kpa Hg-30 psi/kpa Hg-60 psi/kpa Hg-100 psi/kpa Hg-150 psi/kpa Hg-200 psi/kpa Hg-300 psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa ,000 psi/kpa 32 Ranges shown in bold are typically stocked in our warehouse.
35 GTG2518 Series (2.5 /63mm) Stainless Steel Pressure Gauges 1 4 NPT Bottom or Center Back Mount Dimensions Pressure Gauges Lower Connection Flush Mounting Back Connection Flush Mounting, U-Clamp Back Connection Flush Mounting, Front Flange Back Connection NS A A2 b c d d1 E F I L M N P Accessories Flange: GTFF-2.5 U-Clamp: GTUC-2.5 Drawings are not to scale. Dimensions in millimeters. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
36 Pressure Gauges GTG40 Series (4 /100mm) Stainless Steel Pressure Gauges 1 2 NPT Bottom Mount Applications Chemical and petrochemical industries, conventional and nuclear power plants, pumps, hydro-cleaning machines, presses, engine compressors, turbines, diesel engines and refrigerating plants, food and beverage, pharmaceutical industries. Specifications Accuracy ±1.0% of full scale Ambient temperature - 25 C to 65 C Process temperature Max 300 C (Dry) Max 65 C (Filled) Operating pressure 75% of the scale value Over pressure limit 25% of full scale value Case AISI 304 SS Ring AISI 304 SS, bayonet type Bourdon Tube AISI 316L SS Socket AISI 316L SS (directly welded to case) Movement AISI 304 SS Welding Tig argon arc welding Protection IP 55 Dial Aluminum, black & red graduation on white background Pointer Aluminum, black colored micrometer zero adjustable Window Plexiglas Fill Glycerine/H 2 0 (standard) Halocarbon (optional) Gaskets/Vent/ Neoprene Blow out Plugs Standard Scale psi/kpa (standard), special dials & scales available Connection 1/2 NPT (standard) 1/4 NPT (optional) How to order Standard Model Glycerine Filled: GTG Range Code Range Code Range Code Range Code Range Code Hg Hg-15 psi/kpa Hg-30 psi/kpa Hg-60 psi/kpa Hg-100 psi/kpa Hg-150 psi/kpa Hg-200 psi/kpa Hg-300 psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa ,000 psi/kpa ,000 psi/kpa ,000 psi/kpa 34 Ranges shown in bold are typically stocked in our warehouse.
37 GTG40 Series (4 /100mm) Stainless Steel Pressure Gauges 1 2 NPT Bottom Mount Dimensions A D Pressure Gauges ~L H I TYPE - 2 F U NS A D F H I ~L U WT(kg) Drawings are not to scale. Dimensions in millimeters. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
38 Pressure Gauges GTG45 Series (4.5 /115mm) Stainless Steel Pressure Gauges 1 2 NPT Bottom Mount Applications Chemical and petrochemical industries, conventional and nuclear power plants, pumps, hydro-cleaning machines, presses, engine compressors, turbines, diesel engines and refrigerating plants, food and beverage, pharmaceutical industries. Specifications Accuracy ±1.0% of full scale Ambient temperature - 25 C to 65 C Process temperature Max 300 C (Dry) Max 65 C (Filled) Operating pressure 75% of the scale value Over pressure limit 25% of full scale value Case AISI 304 SS Ring AISI 304 SS, bayonet type Bourdon Tube AISI 316L SS Socket AISI 316L SS (directly welded to case) Movement AISI 304 SS Welding Tig argon arc welding Protection IP 55 Dial Aluminum, black & red graduation on white background Pointer Aluminum, black colored micrometer zero adjustable Window Plexiglas Fill Glycerine/H 2 0 (standard) Halocarbon (optional) Gaskets/Vent/ Neoprene Blow out Plugs Standard Scale psi/kpa (standard), special dials & scales available Connection 1/2 NPT (standard) How to order Standard Model Glycerine Filled: GTG Range Code Range Code Range Code Range Code Range Code Hg Hg-15 psi/kpa Hg-30 psi/kpa Hg-60 psi/kpa Hg-100 psi/kpa Hg-150 psi/kpa Hg-200 psi/kpa Hg-300 psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa ,000 psi/kpa ,000 psi/kpa ,000 psi/kpa 36 Ranges shown in bold are typically stocked in our warehouse.
39 GTG45 Series (4.5 /115mm) Stainless Steel Pressure Gauges 1 2 NPT Bottom Mount Dimensions A D Pressure Gauges ~L H I TYPE - 2 F U NS A D F H I ~L U WT(kg) Drawings are not to scale. Dimensions in millimeters. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
40 Pressure Gauges GTG60 Series (6 /125mm) Stainless Steel Pressure Gauges 1 2 NPT Mount Applications Chemical and petrochemical industries, conventional and nuclear power plants, pumps, hydro-cleaning machines, presses, engine compressors, turbines, diesel engines and refrigerating plants, food and beverage, pharmaceutical industries. Specifications Accuracy ±1.0% of full scale Ambient temperature - 25 C to 65 C Process temperature Max 300 C (Dry) Max 65 C (Filled) Operating pressure 75% of the scale value Over pressure limit 25% of full scale value Case AISI 304 SS Ring AISI 304 SS, bayonet type Bourdon Tube AISI 316L SS Socket AISI 316L SS (directly welded to case) Movement AISI 304 SS Welding Tig argon arc welding Protection IP 55 Dial Aluminum, black & red graduation on white background Pointer Aluminum, black colored micrometer zero adjustable Window Plexiglas Fill Glycerine/H 2 0 (standard) Halocarbon (optional) Gaskets/Vent/ Neoprene Blow out Plugs Standard Scale psi/kpa (standard), special dials & scales available Connection 1/2 NPT (standard) 1/4 NPT (optional) How to order Standard Model Glycerine Filled: GTG Range Code Range Code Range Code Range Code Range Code Hg Hg-15 psi/kpa Hg-30 psi/kpa Hg-60 psi/kpa Hg-100 psi/kpa Hg-150 psi/kpa Hg-200 psi/kpa Hg-300 psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa ,000 psi/kpa ,000 psi/kpa ,000 psi/kpa 38 Ranges shown in bold are typically stocked in our warehouse.
41 GTG60 Series (6 /125mm) Stainless Steel Pressure Gauges 1 2 NPT Mount Dimensions A D Pressure Gauges ~L H I TYPE - 2 F U NS A D F H I ~L U WT(kg) Drawings are not to scale. Dimensions in millimeters. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
42 Pressure Gauges GTG40/45 Series (4 /100mm & 4.5 /115mm) 316 Stainless Steel Panel Mount Pressure Gauges 1 4 NPT Back Mount Applications Chemical and petrochemical industries, conventional and nuclear power plants, pumps, hydro-cleaning machines, presses, engine compressors, turbines, diesel engines and refrigerating plants, food and beverage, pharmaceutical industries. How to order Specifications Accuracy ±1.0% of full scale Ambient temperature - 25 C to 65 C Process temperature Max 300 C (Dry) Max 65 C (Filled) Operating pressure 75% of the scale value Over pressure limit 25% of full scale value Case AISI 304 SS Ring AISI 304 SS, bayonet type Bourdon Tube AISI 316L SS Socket AISI 316L SS (directly welded to case) Movement AISI 304 SS Welding Tig argon arc welding Protection IP 55 Dial Aluminum, black & red graduation on white background Pointer Aluminum, black colored micrometer zero adjustable Window Plexiglas Fill Glycerine/H 2 0 (standard) Silicone (optional) Halocarbon (optional) Gaskets/Vent/ Blow out Plugs Standard Scale Connection Neoprene psi/kpa (standard), special dials & scales available 1/4 NPT (standard) Glycerine Filled U-Clamp, 4 (100mm) : GTG4018B + range code (+ GTFF-4 for optional front flange mounting) Glycerine Filled U-Clamp, 4.5 (115mm): GTG4518B + range code (+ GTFF-4.5 for optional front flange mounting) Range Code Range Code Range Code Range Code Hg Hg-15 psi/kpa Hg-30 psi/kpa Hg-60 psi/kpa Hg-100 psi/kpa Hg-150 psi/kpa Hg-200 psi/kpa Hg-300 psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa psi/kpa ,000 psi/kpa ,000 psi/kpa ,000 psi/kpa 40 Ranges shown in bold are typically stocked in our warehouse.
43 GTG40/45 Series (4 /100mm & 4.5 /115mm) 316 Stainless Steel Panel Mount Pressure Gauges 1 4 NPT Back Mount Dimensions Type E Pressure Gauges NS A B ØC ØD E S ØL ØN ØU Type B NS A B ØC ØD E J K V Drawings are not to scale. Dimensions in millimeters. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
44 Pressure Gauges Low Pressure Diaphragm Gauges Brass and Stainless Steel Version Applications Designed for use with air, gas, oil, water or any situation where pressure of less than 10 psi is to be measured. Specifications Ranges Scales available in in/h 2 0 or ounce/in 2 Dial Size 2.5 Accuracy ±2-1-2% - ANSI Grade B Case Black painted steel (dry only) Socket Brass and/or stainless steel Capsule Brass and/or stainless steel diaphragm Movement Brass or stainless steel Lens Acrylic Pointer Aluminum Dial Aluminum Connection 1/4 NPT lower or center back Restrictor Standard Zero Adjust Lower mount only How to order Dial Size Wetted Parts Brass Stainless Steel Mounting 1/4 NPT bottom 1/4 NPT bottom Ranges (in stock): 0-10 oz / 0-18 wc 83K-36 83K-36SS 0-14 oz / 0-25 wc 83K-37 83K-37SS 0-20 oz / 0-35 wc 83K-32 83K-32SS 0-35 oz / 0-60 wc 83K-33 83K-33SS 0-5 psi 83K psi 83K Other ranges available. Contact Gaugetech for details.
45 Low Pressure Diaphragm Gauges Brass and Stainless Steel Version Dimensions Push in Lens 1.900" 48.2mm Pressure Gauges 2.625" 66.6mm.550" SQUARE 14.0mm Max " 87.6mm 1/4" NPT Drawings are not to scale. Dimensions in millimeters. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
46 Pressure Gauges Differential Pressure Indicators Piston Style Applications These piston instruments can indicate small values of differential pressure even when used at high line pressures. They provide instantaneous and continuous information regarding system conditions helping in eliminating premature servicing of equipment, avoid unscheduled down time of costly processes and detect abnormal system conditions. Specifications Ranges 0-8, 0-20, 0-30, 0-50, psid/kpa, from stock Others available (on request) Max Temperature 175 F / 80 C Max Pressure 3000 psi Aluminum 6000 psi 316SS Standard Range 0-5 psid to psid Wetted Materials Aluminum or stainless steel Seals Buna-N or Viton Migration of Media Minor Accuracy FSD Ascending +/ 2% Dial Sizes 2, 2.5, 3.5, 4, 4.5, 6 Case Stainless steel, weatherproof or stainless steel fl anged, weatherproof Connection 1/4 FNPT (standard) others available (on request) Line Connection In-line (standard) Location Back or bottom (on request) How to order Dial Size 3.5 (in stock) 3.5 (in stock) Case Stainless steel Stainless steel Wetted Parts Aluminum Stainless steel Seals Buna-N Viton Mounting In-line In-line Connection 1/4 FNPT 1/4 FNPT Ranges (in stock): 0-8 psid/kpad GTDPGA350-8PSID GTDPGSS350-8PSID 0-20 psid/kpad GTDPGA350-20PSID GTDPGSS350-20PSID 0-30 psid/kpad GTDPGA350-30PSID GTDPGSS350-30PSID 0-50 psid/kpad GTDPGA350-50PSID GTDPGSS350-50PSID psid/kpad GTDPGA PSID GTDPGSS PSID 44 Other ranges available. Contact Gaugetech for details.
47 Differential Pressure Indicators Piston Style Dimensions REGULAR CASE ch FLANGE CASE PLACES Pressure Gauges F d ch d + - c b a 1/4-20UNC 1.81 T c b a p.c.d. d1 DN F a b c d* d1 T ch p.c.d 2.0 1/4 NPT sq /4 NPT sq /4 NPT sq /4 NPT sq /4 NPT sq /4 NPT sq 6.73 *Panel cut out = d Drawings are not to scale. Dimensions in millimeters. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
48 Thermometers Rear Connection Bi-metal Thermometers Overview Gaugetech Bi-metal Thermometers are manufactured according to ASME B.40.3 under strict compliance with ISO The high polished 304 stainless steel case is corrosion resistant. Bi-metal coils are stress relieved and heat treated for maximum accuracy and fast response. Dial faces are concave assuring close proximity of the pointer to the figure intervals. Silicone oil filling is highly recommended on applications where excess vibration may be present. These instruments are used in pulp and paper, oil and gas, petrochemical, industrial and food processing industries. Specifications Case and ring Gasket Stem Coil Connection Window Pointer Dial Recalibration Over range Silicone fi lling Accuracy Options Shipping weight 304 SS, high polish, hermetically sealed to prevent fogging and exclusion of moisture, ensuring long life of internal components. Natural white rubber compatible with silicone filling. 304 SS, high polish, welded at tip and case, 1/4 (63mm) diameter for lengths to 24. Other dimensions and stem lengths available. Bi-metallic, dampened with 100,000 c.s. silicone grease on ranges to 500 F. Heat treated and stress relieved to maintain a constant expansion ratio and specified accuracy. 304SS, adjustable angle, 1/2 NPT Food grade shatter proof glass, 0.16 (4mm) thick Balanced, black aluminum. Pointer flutter eliminated by application of 100,000 c.s. silicone grease to bimetal coil on ranges up to and including 500 F. Aluminum, baked enamel finish, white background with black markings. Concave design with celcius on lower plane and fahrenheit on the upper. This allows close proximity of pointer to divisions on scale for accurate readings. Hex head adjustment screw with screw driver slot allows the operator to re-zero the pointer for maximum accuracy in selected area of the 270 degree dial. Thermometer must be inserted at least 2.5 (63.5mm) into agitated bath with a certified thermometer as a test comparison. Bi-metal maybe be over or under ranged temporarily to 50% of full scale value. May be fi lled with silicone for severe vibration applications. ±1.0% Full Scale ASME B40.3 Grade A Other threaded connections, stem diameters and lengths, silicone filling and special dials. GT-32: 0.7 lbs (0.3kg) GT-52: 1.2 lbs (0.54kg) 46
49 Rear Connection Bi-Metal Thermometers Dimensions Thermometers mm mm RECALIBRATOR 3 DIAL 3.29 (83.5mm) 5 DIAL 5.28 (134mm) 1/2 NPT 0.25 (6.3mm) mm STEM LENGTH Drawings are not to scale. How to order Range codes shown in bold are typically stocked in our warehouse. * Not recomended for continuous service over 800 F (425 C) ** Specify length in inches (72 maximum) DIAL SIZE BASE PRODUCT STEM LENGTH** PRODUCT CODE (63.5mm) GT-32 4 (101.6mm) GT-34 6 (152.4mm) GT-36 9 (228.6mm) GT (304.8mm) GT (381.0mm) GT (457.2mm) GT (609.6mm) GT (63.5mm) GT-52 4 (101.6mm) GT-54 6 (152.4mm) GT-56 9 (228.6mm) GT (304.8mm) GT (381.0mm) GT (457.2mm) GT (609.6mm) GT-524 DUAL SCALE F OUTER SCALE C INNER SCALE F to 100 F -75 C to 40 C F to 160 F -40 C to 70 C 03* 25 F to 125 F -5 C to 50 C 04 0 F to 200 F -20 C to 95 C F to 240 F -10 C to 115 C 27 0 F to 250 F -20 C to 120 C F to 300 F 10 C to 150 C F to 400 F 10 C to 205 C F to 500 F 10 C to 260 C F to 750 F 50 C to 400 C 10* 200 F to 1000 F 100 C to 550 C RANGE CODE HOW TO ORDER Specify base product code. Add range code required. Add option code required. Example: GTA F (Adjustable Angle, 3 dial, 2.5 stem, range code 02, filled) RANGE OPTIONS FAHRENHEIT CELSIUS RANGE CODE FAHRENHEIT ONLY 01F -100 F to 100 F 02F -40 F to 160 F 03F* 25 F to 125 F 04F 0 F to 200 F 05F 20 F to 240 F 27F 0 F to 250 F 06F 50 F to 300 F 07F 50 F to 400 F 08F 50 F to 500 F 09F* 150 F to 750 F 10F* 200 F to 1000 F RANGE CODE CELCIUS ONLY 01C -75 C to 40 C 02C -40 C to 70 C 03C* -5 C to 50 C 04C -20 C to 95 C 05C -10 C to 115 C 27C -20 C to 120 C 06C 10 C to 150 C 07C 10 C to 205 C 08C 10 C to 260 C 09C* 50 C to 400 C 10C* 100 C to 550 C ADDITIONAL OPTIONS CODE OPTION CODE F Silicone Filled M Figure Minor Intervals Divisions Gaugetech Inc. Edmonton, AB, Canada Toll Free: Figure Minor Intervals Divisions / OPTION Maximum Registering Pointer 47
50 Thermometers Adjustable Angle Bi-metal Thermometers Overview Gaugetech Bi-metal Thermometers are manufactured according to ASME B.40.3 under strict compliance with ISO The high polished 304 stainless steel case is corrosion resistant. Bi-metal coils are stress relieved and heat treated for maximum accuracy and fast response. Dial faces are concave assuring close proximity of the pointer to the figure intervals. Silicone oil filling is highly recommended on applications where excess vibration may be present. These instruments are used in pulp and paper, oil and gas, petrochemical, industrial and food processing industries. Specifications Case and ring Gasket Stem Coil Connection Window Pointer Dial Recalibration Over range Silicone fi lling Accuracy Options Shipping weight 304 SS, high polish, hermetically sealed to prevent fogging and exclusion of moisture, ensuring long life of internal components. Natural white rubber compatible with silicone filling. 304 SS, high polish, welded at tip and case, 1/4 (63mm) diameter for lengths to 24. Other dimensions and stem lengths available. Bi-metallic, dampened with 100,000 c.s. silicone grease on ranges to 500 F. Heat treated and stress relieved to maintain a constant expansion ratio and specified accuracy. 304SS, adjustable angle, 1/2 NPT Food grade shatter proof glass, 0.16 (4mm) thick Balanced, black aluminum. Pointer flutter eliminated by application of 100,000 c.s. silicone grease to bimetal coil on ranges up to and including 500 F. Aluminum, baked enamel finish, white background with black markings. Concave design with celcius on lower plane and fahrenheit on the upper. This allows close proximity of pointer to divisions on scale for accurate readings. Hex head adjustment screw with screw driver slot allows the operator to re-zero the pointer for maximum accuracy in selected area of the 270 degree dial. Thermometer must be inserted at least 2.5 (63.5mm) into agitated bath with a certified thermometer as a test comparison. Bi-metal maybe be over or under ranged temporarily to 50% of full scale value. May be fi lled with silicone for severe vibration applications. ±1.0% Full Scale ASME B40.3 Grade A Other threaded connections, stem diameters and lengths, silicone filling and special dials. GTA-32: 1.1 lbs (0.5kg) GTA-52: 1.5 lbs (0.68kg) 48
51 Adjustable Angle Bi-metal Thermometers Dimensions Thermometers 3.75 (95mm) 2.24 (57mm) STEM LENGTH RECALIBRATOR 1/2 NPT 3 DIAL 3.29 (83.5mm) 5 DIAL 5.28 (134mm) ø.25 (6.3mm) Drawings are not to scale. STEM ROTATION 360 AROUND THE DIAL How to order Range codes shown in bold are typically stocked in our warehouse. * Not recomended for continuous service over 800 F (425 C) ** Specify length in inches (72 maximum) DIAL SIZE BASE PRODUCT STEM LENGTH** PRODUCT CODE (63.5mm) GTA-32 4 (101.6mm) GTA-34 6 (152.4mm) GTA-36 9 (228.6mm) GTA (304.8mm) GTA (381.0mm) GTA (457.2mm) GTA (609.6mm) GTA (63.5mm) GTA-52 4 (101.6mm) GTA-54 6 (152.4mm) GTA-56 9 (228.6mm) GTA (304.8mm) GTA (381.0mm) GTA (457.2mm) GTA (609.6mm) GTA-524 DUAL SCALE F OUTER SCALE C INNER SCALE F to 100 F -75 C to 40 C F to 160 F -40 C to 70 C 03* 25 F to 125 F -5 C to 50 C 04 0 F to 200 F -20 C to 95 C F to 240 F -10 C to 115 C 27 0 F to 250 F -20 C to 120 C F to 300 F 10 C to 150 C F to 400 F 10 C to 205 C F to 500 F 10 C to 260 C F to 750 F 50 C to 400 C 10* 200 F to 1000 F 100 C to 550 C RANGE CODE HOW TO ORDER Specify base product code. Add range code required. Add option code required. Example: GTA F (Adjustable Angle, 3 dial, 2.5 stem, range code 02, filled) RANGE OPTIONS FAHRENHEIT CELSIUS RANGE CODE FAHRENHEIT ONLY 01F -100 F to 100 F 02F -40 F to 160 F 03F* 25 F to 125 F 04F 0 F to 200 F 05F 20 F to 240 F 27F 0 F to 250 F 06F 50 F to 300 F 07F 50 F to 400 F 08F 50 F to 500 F 09F* 150 F to 750 F 10F* 200 F to 1000 F RANGE CODE CELCIUS ONLY 01C -75 C to 40 C 02C -40 C to 70 C 03C* -5 C to 50 C 04C -20 C to 95 C 05C -10 C to 115 C 27C -20 C to 120 C 06C 10 C to 150 C 07C 10 C to 205 C 08C 10 C to 260 C 09C* 50 C to 400 C 10C* 100 C to 550 C ADDITIONAL OPTIONS CODE OPTION CODE F Silicone Filled M Figure Minor Intervals Divisions Gaugetech Inc. Edmonton, AB, Canada Toll Free: Figure Minor Intervals Divisions / OPTION Maximum Registering Pointer 49
52 Thermometers Bottom Connection Bi-metal Thermometers Overview Gaugetech Bi-metal Thermometers are manufactured according to ASME B.40.3 under strict compliance with ISO The high polished 304 stainless steel case is corrosion resistant. Bi-metal coils are stress relieved and heat treated for maximum accuracy and fast response. Dial faces are concave assuring close proximity of the pointer to the figure intervals. Silicone oil filling is highly recommended on applications where excess vibration may be present. These instruments are used in pulp and paper, oil and gas, petrochemical, industrial and food processing industries. Specifications Case and ring Gasket Stem Coil Connection Window Pointer Dial Recalibration Over range Silicone fi lling Accuracy Options Shipping weight 304 SS, high polish, hermetically sealed to prevent fogging and exclusion of moisture, ensuring long life of internal components. Natural white rubber compatible with silicone filling. 304 SS, high polish, welded at tip and case, 1/4 (63mm) diameter for lengths to 24. Other dimensions and stem lengths available. Bi-metallic, dampened with 100,000 c.s. silicone grease on ranges to 500 F. Heat treated and stress relieved to maintain a constant expansion ratio and specified accuracy. 304SS, adjustable angle, 1/2 NPT Food grade shatter proof glass, 0.16 (4mm) thick Balanced, black aluminum. Pointer flutter eliminated by application of 100,000 c.s. silicone grease to bimetal coil on ranges up to and including 500 F. Aluminum, baked enamel finish, white background with black markings. Concave design with celcius on lower plane and fahrenheit on the upper. This allows close proximity of pointer to divisions on scale for accurate readings. Hex head adjustment screw with screw driver slot allows the operator to re-zero the pointer for maximum accuracy in selected area of the 270 degree dial. Thermometer must be inserted at least 2.5 (63.5mm) into agitated bath with a certified thermometer as a test comparison. Bi-metal maybe be over or under ranged temporarily to 50% of full scale value. May be fi lled with silicone for severe vibration applications. ±1.0% Full Scale ASME B40.3 Grade A Other threaded connections, stem diameters and lengths, silicone filling and special dials. GTB-32: 0.8 lbs (0.31kg) GTB-52: 1.6 lbs (0.72kg) 50
53 Bottom Connection Bi-metal Thermometers Dimensions 1.76 (44.7mm) 1.25 (32mm).87 (22mm) Thermometers.32 (8mm) 3 DIAL 3.29 (83.5mm) 5 DIAL 5.28 (134mm) 3 DIAL ø 2.16 (55mm) 5 DIAL ø 3.03 (77mm) 1/2 NPT Drawings are not to scale. STEM LENGTH How to order Range codes shown in bold are typically stocked in our warehouse. * Not recomended for continuous service over 800 F (425 C) ** Specify length in inches (72 maximum) DIAL SIZE BASE PRODUCT STEM LENGTH** PRODUCT CODE (63.5mm) GTB-32 4 (101.6mm) GTB-34 6 (152.4mm) GTB-36 9 (228.6mm) GTB (304.8mm) GTB (381.0mm) GTB (457.2mm) GTB (609.6mm) GTB (63.5mm) GTB-52 4 (101.6mm) GTB-54 6 (152.4mm) GTB-56 9 (228.6mm) GTB (304.8mm) GTB (381.0mm) GTB (457.2mm) GTB (609.6mm) GTB-524 DUAL SCALE F OUTER SCALE C INNER SCALE F to 100 F -75 C to 40 C F to 160 F -40 C to 70 C 03* 25 F to 125 F -5 C to 50 C 04 0 F to 200 F -20 C to 95 C F to 240 F -10 C to 115 C 27 0 F to 250 F -20 C to 120 C F to 300 F 10 C to 150 C F to 400 F 10 C to 205 C F to 500 F 10 C to 260 C F to 750 F 50 C to 400 C 10* 200 F to 1000 F 100 C to 550 C RANGE CODE HOW TO ORDER Specify base product code. Add range code required. Add option code required. Example: GTA F (Adjustable Angle, 3 dial, 2.5 stem, range code 02, filled) RANGE OPTIONS FAHRENHEIT CELSIUS RANGE CODE ø.25 (6.3mm) FAHRENHEIT ONLY 01F -100 F to 100 F 02F -40 F to 160 F 03F* 25 F to 125 F 04F 0 F to 200 F 05F 20 F to 240 F 27F 0 F to 250 F 06F 50 F to 300 F 07F 50 F to 400 F 08F 50 F to 500 F 09F* 150 F to 750 F 10F* 200 F to 1000 F RANGE CODE CELCIUS ONLY 01C -75 C to 40 C 02C -40 C to 70 C 03C* -5 C to 50 C 04C -20 C to 95 C 05C -10 C to 115 C 27C -20 C to 120 C 06C 10 C to 150 C 07C 10 C to 205 C 08C 10 C to 260 C 09C* 50 C to 400 C 10C* 100 C to 550 C ADDITIONAL OPTIONS CODE OPTION CODE F Silicone Filled M Figure Minor Intervals Divisions Gaugetech Inc. Edmonton, AB, Canada Toll Free: Figure Minor Intervals Divisions / OPTION Maximum Registering Pointer 51
54 Thermometers Thermowells Overview Thermowells are recommended for temperature instruments in process systems where pressure, velocity, or viscous, abrasive, and corrosive materials are present individually or in combination. A properly selected thermowell will protect the temperature instrument from damage resulting from these process variables. Additionally, a thermowell enables removal of the temperature instrument for replacement, repair, or testing without affecting the process system. We stock a wide range of popular industry thermowells to suit industrial & bi-metal thermometers, thermocouples, RTD s & temperature recorders. We welcome special inquiries on thermowells, please contact our sales desk. Specifications Type Instrument Connection Process Connection Materials Stem Lengths Bore Standard Stepped.702 Bore Straight 1/2 FNPT 1/2 MNPT 3/4 MNPT 1 MNPT 304SS and 316SS available Ordering & Dimensions Process Connection P 3/4 NPT 1 NPT Model Number.702 Bore Testwell - Standard Straight Stem Length L Insertion Length U B Diameter Overall Length in mm in mm in mm in mm
55 Thermowells Ordering & Dimensions Thermometers Process Connection P 1/ NPT In Stock 3/ NPT In Stock NPT.260 Bore Thermowells - Standard Stepped Model Number Stem Length L Insertion Length U B Diameter Overall Length in mm in mm in mm in mm S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S Gaugetech Inc. Edmonton, AB, Canada Toll Free:
56 Thermometers Miscellaneous Thermometers Dual Magnet Thermometers Gaugetech dual magnet-mount surface thermometers are specifically designed to measure surface temperature. Used on any horizontal surface or held magnetically to any magnetic surface. These instruments feature two magnets that act as the thermometer s base and hold the instrument in place on magnetic surfaces. Part Number Range GTM02C -70/700 C GTM27C -20/120 C GTM27F 0/250 F GTM08F 50/500F Other ranges available upon request. Glass Pocket Themometers Gaugetech liquid-in-glass 6 pocket test thermometer is useful for applications requiring fast and accurate temperature readings. These thermometers are popular for test wells as the thermometer has a 1 4 diameter. Each thermometer comes standard with a plastic pocket carrying case with clip. Part Number Range GT /120 C GT /70 C Other ranges available upon request. 54
57 Miscellaneous Thermometers Bi-metal Pocket Thermometer Gaugetech bi-metal pocket test thermometers are useful for applications requiring fast and accurate temperature readings. These thermometers feature a easy to read 1.5 dial and are popular for use in the food, heating, air conditioning and refrigeration industries. Each thermometer comes standard with a plastic pocket carrying case with clip. Thermometers Part Number Range T160-40/160 F+C T220 0/220 F+C T550 50/500F Other ranges available upon request. Gaugetech Inc. Edmonton, AB, Canada Toll Free:
58 Accessories Accessories Gaugetech Test Bar Manifold Gaugetech test bar manifolds are machined from bar stock and supplied in 316 stainless steel. With six 1/2 female threaded connections, these bars are suitable for a wide variety of testing and manifold applications. Use our GTH series needle valves and create the system that suits your needs. Gaugetech test bar manifolds are designed with a 10,000 psi MWP. Note: Needle valves and hex plugs must be purchased separately. Part Number NPT MWP GTHTM 1/2 10,000 psi Gaugetech In-Line Check Valve Gaugetech in-line check valves are machined from hex stock and supplied in 316 stainless steel and are available in 1/2 NPT with male-female threaded connections. These valves are designed with an 6,000 psi MWP or 10,000 psi MWP and a 45 psi cracking pressure. Part Number NPT MWP GTCV12SS 1/2 6,000 psi GTCV12SS10 1/2" 10,000 psi Gaugetech Pressure Dampeners Gaugetech snubbers and pulsation dampeners are designed to protect instruments from pulsating pressures applications. Sudden pressure changes are dampened before reaching the instrument protecting it from high stress, making easier readings and helps prolong the life of the instrument. Available in brass and 316SS, 1/4" and 1/2" NPT. Please consult our sales desk for further information on Gaugetech pressure dampeners. 56
59 Accessories Gaugetech Gauge Siphon Gaugetech gauge siphons are a cost effective way to maximize gauge life, made from solid bar stock to produce a compact rigid mount and easy installation. Produced in 316 stainless steel or carbon steel materials with 1/2 NPT and 1/4 NPT M x F available. Accessories Eliminate old style pigtail Reduces gauge shock or whip Compact closer installations Provides a thermal barrier between hot vapors and the instrument Freeze Protection: Filling the siphon with glycol, it forms a barrier to prevent freezing of instruments on wet air lines. Filling the siphon with kerosene it acts as a freeze protection for liquid service installations. Part Number NPT Material MP5C 1/2" carbon steel MP5SS 1/2" 316SS Gaugetech Finned Siphon Gaugetech finned gauge siphons are designed for steam. Up to 75% heat loss allows the instrument to work within its designed temperature rating. The finned gauge siphon serves to create a condensate barrier between the live steam and the pressure instrument. Low coefficient of conduction heat of standard materials allows for a predicable temperature of the instrument. 316 stainless steel and carbon steel available. 1/2 NPT M x F standard. Part Number NPT Material MP5FC 1/2" carbon steel MP5FSS 1/2" 316SS Gaugetech Inc. Edmonton, AB, Canada Toll Free:
60 Accessories Accessories P/T Plugs & Accessories Pressure and temperature test plugs are a necessity to today s complex HVAC systems, providing access to process fluids and gases without disruption of the system. Measuring Pressure/Temperature/Flow Rate Sampling: Retrieve samples without disrupting system Bleeding: Bleed air from A/C Lines to increase efficiency Use of a single set of gauges to test or sample all points Plugs are available with brass or 304SS body materials with plug core materials of Neoprene or Nordel to suit the needs of the application 1/8, 1/4, 3/8 and 1/2 NPT male threads are available on all models Caps are standard on all P/T plugs Gauge probes are used in conjunction with standard 1/4 NPT pressure gauges for testing pressures within the system utilizing the pressure/temperature plug. A standard pocket test thermometer may be used for temperature readings. Plug extensions and cap chains may be ordered as required. Please consult our sales desk for further information on P/T plugs. Diaphragm & Sanitary Seals Diaphragm seals are designed to isolate the sensing element of pressure gauges, pressure switches and electronic pressure transmitters from process fluids which may be corrosive, viscous and/ or high temperature. Sanitary seals are also available for sanitary applications within the food industry. Many different sizes, configurations, materials and process fills are available. Please consult our sales desk for further information on diaphragm & sanitary seals. 58
61 Accessories Overload Protectors These devices are used to protect pressure gauges, pressure switches and other instruments from overpressure. If, due to occasional faults, the overpressure exceeds the maximum allowed value, the device automatically by-passes the instrument until the pressure value is back to normal. Connections are available in 1/4" and 1/2" NPT M x F 1/4" NPT. Set points available from 50 psi to 6000 psi. Accessories Part Number NPT Material MP4-8/9 1/2" 316SS Gaugetech Inc. Edmonton, AB, Canada Toll Free:
Steam & Hot Water INSTRUMENTS. Adjustable Angle Industrial Thermometer. Econo Thermometer. ] Aluminum Stem. ] Air-Duct Stem
Adjustable Angle Industrial Thermometer Recognized globally as the Trerice BX Industrial Thermometer, this is an instrument of extreme accuracy and rugged dependability. Available in scale lengths of 7"(AX),
More informationHexagonal Bar Stock Needle Valve
Hexagonal Bar Stock Needle Valve HBNV Series Features Maximum working pressure: 6000 psi (414bar) at 100 F (38 C) 10000 psi (690bar) at 100 F (38 C) Working temperature: -65 F (-54 C) to 464 F (240 C)
More informationJHawk Instrument Inc. warrants the
Warranty Statement JHawk Instrument Inc. warrants the component parts and workmanship of its products under normal use and service for a period of one year from the date of the shipment. All obligations
More informationAll Stainless Steel / SS Case Pressure Gauge
All Stainless Steel / SS Case Pressure Gauge 23L, 23B Series HAWK 23L and 23B series bourdon tube all stainless steel pressure gauges with front flange are designed to fulfill the requirements of high
More informationDisc Blow Out Protection. Heavy Duty Bourdon Tube/Rotary Geared Movement. Socket welded to Case. Open Front/ Removable Ring. Field Liquid Fillable
Since 97 Specifications: Heavy Duty Bourdon Tube/Rotary Geared Movement Socket welded to Case Field Liquid Fillable Zero Adjustable Pointer HAWK 7L and 7B series bourdon tube all stainless steel pressure
More informationProcess Industry. Specification Guide. For. Pressure & Temperature Instruments & Related Accessories
Process Industry Specification Guide For Pressure & Temperature Instruments & Related Accessories Prepared for Consultant, Design & Specification Engineers Gauges Differential Gauge (PDT) 1. The pressure
More informationPremium Stainless Steel Liquid Filled Gauge
Premium Stainless Steel Liquid Filled Gauge PFP 1 Description & Features: Liquid fi lled stainless steel case protects against vibration and pulsation Bayonet ring Highly accurate Back, bottom, or panel
More informationTBM. Bi-Metal Thermometer
Description & Features: A general purpose, versatile 1" (25mm) to 6" (150mm) dial, 304 stainless steel thermometer Bi-metallic sensing element for reliable readings Back, bottom or adjustable angle connection
More information2 1 /2" Glycerin-Filled Dual Scale Vacuum Gauges
BAC-25 Brass Case Dial Size: 2 1 /2" Glycerin Filled Pressure Ranges: 30" HG to 15,000 PSI/Bar (Dual Scale) Accuracy: Within 1.5% of Maximum Graduation Case: Forged Brass With Polished Brass ABS Bourdon
More informationALL SS ELECTRIC CONTACT PRESSURE GAUGE
ALL SS ELECTRIC CONTACT PRESSURE GAUGE The label Trafag Industrial Components extends the Trafag brand name to instruments manufactured by qualified partner companies. Trafag Industrial Components complement
More informationALL STAINLESS STEEL PRESSURE GAUGE
ALL STAINLESS STEEL PRESSURE GAUGE The label Trafag Industrial Components extends the Trafag brand name to instruments manufactured by qualified partner companies. Trafag Industrial Components complement
More informationINDUSTRIAL THERMOMETER
INDUSTRIAL THERMOMETER The label Trafag Industrial Components extends the Trafag brand name to instruments manufactured by qualified partner companies. Trafag Industrial Components complement the genuine
More informationALL SS ELECTRIC CONTACT PRESSURE GAUGE
ALL SS ELECTRIC CONTACT PRESSURE GAUGE The label Trafag Industrial Components extends the Trafag brand name to instruments manufactured by qualified partner companies. Trafag Industrial Components complement
More informationTEXAN SUPPLY VALVE & Whatever you need we can supply
PO BOX 1856 281-773-4283 FAX 281-383-148 BAYTOWN, TX 77522 VALVE & INSTRUMENTATION QUICK REFERENCE GUIDE Whatever you need we can supply PO BOX 1856 281-773-4283 FAX 281-383-148 BAYTOWN, TX 77522 VALVES
More informationINDUSTRIAL THERMOMETER
INDUSTRIAL THERMOMETER The label Trafag Industrial Components extends the Trafag brand name to instruments manufactured by qualified partner companies. Trafag Industrial Components complement the genuine
More informationSpecialty Gauge Catalog Index
Specialty Gauge Catalog Index Specialty Gauge Introduction 3 Process Gauges - Series NF4UGY and LF4UGY 4 4 Series NF4UGY5 & LF4UGY5 and Dimensions 5 Standard Ranges 6 Ultra Pressure Gauges - Series UG-1
More informationTBM. Bi-Metal Thermometer
Description & Features: A general purpose, versatile 1 (25mm) to 6 (150mm) dial, 304 stainless steel thermometer Bi-metallic sensing element for reliable readings Back, bottom or adjustable angle connection
More informationSOLFRUNT Pressure Gauges and Other Products for the Process Industries
A1 SOLFRUNT Pressure Gauges and Other Products for the Process Industries AMETEK s line of high quality process gauges are specifically designed to meet the demanding needs of the chemical and petroleum
More information1 (25mm): Acrylic Others: Glass standard, hermetically sealed
Description & Features: A general purpose, versatile 1" (25mm) to 6" (150mm) dial, 304 stainless steel thermometer Bi-metallic sensing element for reliable readings Back, bottom or adjustable angle connection
More informationNEEDLE VALVE GAUGE VALVE VALVE MANIFOLD BALL VALVE ACCESSORIES
NEEDLE VLVE GUGE VLVE VLVE MNIFOLD BLL VLVE CCESSORIES Index Introduction ----------------------------- Valve Manifold VM0 ---------- Product Feature ----------------------- Valve Manifold VM0 ----------6
More information4 (100mm), 4.5 (115mm) white aluminum with black and red markings Case AISI 304 SS AISI 304 SS
PFP Description & Features: Liquid filled stainless steel case protects against vibration and pulsation Bayonet ring Highly accurate Back, bottom, or panel mounted Under and overload stops Ventable plug
More informationADJUSTABLE ANGLE THERMOMETERS
ADJUSTABLE ANGLE THERMOMETERS Commercial grade units available with 9" aluminum or plastic cases, spirit fill, and 3½" or 6" stems. Unit can be adjusted for easy reading at any angle. SPECIFICATIONS Case:
More informationPrecision Service OBSOLETE 100MM STAINLESS STEEL GAUGES. (Subject to available inventory) SPECIFICATIONS DIMENSIONS ACCURACY CASE SIZES CASE MATERIAL
ASME Grade A ±.0% of range 00mm diameter (4") 304 CASE STYLES UC U-Clamp Mount FF Front Flange Mount 36 4" NPT lower or lowerback connection 30 to 0,000 psi Dual scale psi and kpa Aluminum, black painted
More informationDIAPHRAGM SEALS. MHP SERIES MINI HIGH PRESSURE Mini diaphragm seal for pressures up to 6000 psi
DIAPHRAGM SEALS seals, also referred to as isolators or chemical seals, are used to protect instruments from viscous, corrosive or very high temperature process media. PIC stocks, fills and calibrates
More informationMarsh Instruments. STD Pocket Thermometer. Digital Pocket Thermometer. Specifications. Specifications. Gas Pressure Test Set. belgas.
Marsh Instruments STD Pocket Thermometer 1" Dial 304SS Hermetically Sealed Case 5" long stem Protective Case with SS Clip Digital Pocket Thermometer 3.5 Digital LCD display ABS Plastic Case 5" long stem
More informationMarsh Instruments. Marshalltown Value Series Gauge. Specifications. X-Mas Tree Gauge. Specifications. belgas.net 1
Marsh Instruments Marshalltown Value Series Gauge ASME Grade B Extra Savings with Quantity Pricing 4 Standard Mounting Options: LM, CB, Right & Left (1.5" Only) Marshalltown Value Series are the most economical,
More informationSS CASE BRASS PRESSURE GAUGE
SS CASE BRASS PRESSURE GAUGE The label Trafag Industrial Components extends the Trafag brand name to instruments manufactured by qualified partner companies. Trafag Industrial Components complement the
More informationProduct Catalog. Our Products. DCI Dynamic Instruments Website: dcidynamic.com
1 Product Catalog Our Products We at Dynamic are proud to present out new technical catalogue detailing our extensive range of Pressure Gauges, Thermometers, diaphragm seal, transmitter and accessories.
More informationMulti-Port Gauge Valves M5 and M51
Multi-Port Gauge Valves M5 and M51 M5 Product Overview The M5 and M51 are multi-port gauge valves allowing the versatile positioning of gauges or pressure switches without requiring additional penetration
More informationWINTERS INSTRUMENTS MANUFACTURER OF INDUSTRIAL INSTRUMENTATION
Process Industry Products www.winters.com MANUFACTURER OF INDUSTRIAL INSTRUMENTATION PPc Process Gauge The PPC series gauge is a durable instrument with a phenolic solid front and blowout back. Use the
More informationO.E.M GAUGES. For Installation and Operation Manuals Please Visit: Mid-West Instrument
O.E.M GAUGES For Installation and Operation Manuals Please Visit: www.midwestinstrument.com/literature Mid-West Instrument Product Notes: BULLETIN NO. 126-127/11 (SUPERSEDES BULLETIN NO. 126-127/00) O.E.M
More informationBrinda Industries. Process Measuring Instruments.
Brinda Industries Primary Business Address C-1/1301, GIDC Chhatral TA- Kalol, Dist - Gandhinagar, Gujarat - 382729, INDIA. Phone: 91-2764-233434 Fax: 91-2764-233087 E-mail: info@lapressuregauges.com Alternate
More informationGT All SS Industrial Dial Thermometer Gas Filled system
TM ll SS Industrial Dial Thermometer Gas Filled system Special Features approved electrical contacts. Inert gas filled expansion system. Stainless steel case & stem With or without thermowell Silicon oil
More informationAnderson Greenwood Series M9 Block and Bleed Gauge Valves
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation Features General application
More informationMid-West Instrument. Diaphragm Type Differential Pressure Gauge & Switch Model 130. Shown here with Range 0-5 H2O
Diaphragm Type Differential Pressure Gauge & Switch BULLETIN NO. 130/11 (SUPERSEDES BULLETIN NO. 130/02) is a rugged general purpose differential pressure gauge with a 4-1/2" round dial. Common Applications:
More informationPRODUCT OVERVIEW A Trusted Advisor and Supplier for the Oil, Energy, Mining and Industrial Sectors
Proud member of the Unified Valve Group PRODUCT OVERVIEW A Trusted Advisor and Supplier for the Oil, Energy, Mining and Industrial Sectors May/2014 Proud member of the Unified Valve Group PRODUCTS TO TRUST
More informationLiquid Filled HW 160MM STAINLESS STEEL SPECIFICATIONS. 26 HW 160MM STAINLESS STEEL GAUGES ACCURACY CASE SIZES CASE MATERIAL
Liquid Filled HW 60MM STAINLESS STEEL Liquid Filled or Dry - Field Fillable Socket Welded to the Case Ranges to 20,000 psi Heavy Duty All Stainless Steel Marsh Instruments HW 60mm Stainless Steel gauges
More informationPRESSURE GAUGES. Featuring Palmer s. Pressure Gauges
PRESSURE GAUGES Featuring Palmer s Pressure Gauges Palmer Pressure Gauges Catalog Index and Model Selection 25BB Brass Case Gauge 45TS Solid Front Process Gauge 60AB Test Grade Gauge Introduction How To
More informationSevere Service 40MM & 50MM SEVERE SERVICE GAUGE
Severe Service 40MM & 50MM SEVERE SERVICE GAUGE Copper Alloy Internals Glycerine Filled Center Back Mount Only Marsh Instruments Liquid-Filled Gauges are designed to perform in rugged and harsh environmental
More informationMarsh Gauge Selection Made easy! 6-10 Filters Regulators Lubricators General Service Gauges Severe Service Gauges
INDEX What s New 2-5 Quick Selector Marsh Selection Made easy! 6-0 Filters Regulators Lubricators Miniature (M) & Standard (M2) FRL s, Filters, Regulators, Filter-Regulators, Lubricators (6) -5 General
More informationDifferential Pressure Gauges (701P Series)
Applications Equipped two Process Connections Indicating low and high pressure Measuring differential pressure as well as liquid or flow levels Recommended to use 3-way & 5-way valve manifold Pressure
More informationWINTERS ( )
Economy Economy Test Panel Mounted Economy Spiral Tube Series New Sizes! Economy CRN Description The Winters Economy Gauge is designed for applications where cost savings are paramount. Many configurations
More informationACCESSORIES AND DIAPHRAGM SEAL
ACCESSORIES AND DIAPHRAGM SEAL TA102 TA201 TA202 TA203 TD101 TD103 TD104 TD202 Data sheet H20022a 05/2017 TD301 TD302 TD303 Trafag Italia Srl Via Cremona 1 20025 Legnano (Mi) Tel. +39 0331 59 23 97 Fax
More informationHeavy Duty Full Stainless Steel Pressure Gauges
Heavy Duty Full Stainless Steel Pressure Gauges Our Range of full Stainless Steel Pressure Gauges offers superior quality & reliability & are ideally suited for harsh conditions & the resulting high demands
More informationTBM. Bi-Metal Thermometer
Description & Features: A general purpose, versatile 1 (25mm) to 6 (150mm) dial, 304 stainless steel thermometer Bi-metallic sensing element for reliable readings Back, bottom or adjustable angle connection
More informationData Sheet T5500/T6500 Pressure Gauges
Data Sheet FEATURES Easily adjusted micrometer pointer PLUS! Performance dampens vibration, shock and pulsation effects Rugged all welded SS design Overload protection 130% of range Low ambient temperature
More informationWGI. General Purpose Pressure Gauges Painted Steel Case Copper Alloy Internals Classic Series Model WJ04/06
WGI Pressure Gauges General Purpose Pressure Gauges Painted Steel Case Copper Alloy Internals Classic Series Model WJ4/6 1½ Dial Application WGI Classic series pressure gauges are for general service applications
More informationBrass: 200 psi Media: max. 140 F (+93 C); min. 0 F (-18 C) Brass Brass, available with "T" or lever type handle None
Accessories > Gauge Cocks > 910.10 Type 910.10 WIKA gauge cocks provide an economical method for isolating the instrument from the process and for throttling line pressure. They also act as an adjustable
More information300/400/ /900 SERIES
Dial Indicating Thermometers Vapor Actuated Remote 300/400/600 700/900 SERIES Indicates media temperature using a temperature-actuated liquid in the sensing element and a highly accurate, high quality
More informationAnderson Greenwood MB Series Integral Manifolds
A range of 2, 3 or 5-valve integral manifolds for connection to bottom inlet, low-profile pressure transmitters Features MB2 General application MB3 The MB series includes 2 valve manifolds for static
More informationINTRODUCTION. Catalog 898 covers one of the broadest lines of remote reading thermometers available anywhere in the world.
INTRODUCTION Miljoco Corporation is an international manufacturer of indicating temperature and pressure instruments and was founded in 1979 by Howard M. Trerice. Presently, its headquarters are located
More informationP3M5S, P4M5S, P6M5S 5-VALVE SOFT SEAT MANIFOLD
P3M5S, P4M5S, P6M5S 5-VALVE MANIFOLD GAS STYLE MANIFOLD 5-Valve Gas Style Manifold The 5-valve manifold features 2 isolation valves, 2 equalizer valves and 1 vent valve in a single body for isolation and
More informationGauge Valves. Block and Bleed Valves Multi-Port Valves OS&Y Valves
Gauge Valves Block and Bleed Valves Multi-Port Valves OS&Y Valves Anderson Greenwood is the industry leader in instrument valve technology and the original innovator of the 3-valve manifold. Our capabilities
More informationIndustrial Pressure Gauges
Floyd Instrument s industrial series pressure gauges are designed & manufactured for use in aggressive process media applications where accuracy, repeatability, and long term reliability are required.
More informationProcess Industry. Diaphragm Seal Solutions
Process Industry Diaphragm Seal R Overview Diaphragm Seal Systems Provide Protection to Ensure Safety, Reliability Diaphragm seal systems protect gauges from hot, viscous, contaminated or corrosive media.
More informationWP6 All SS (SS 316 Wetted Parts ) Pressure Gauge Bourdon type
pecial Features xternal zero adjustment (optional) tainless steel case & measuring system ocket directly welded to case Dry and liquid filled version tandard followed N 837- (for N 00, & 0 mm) C marking
More informationManifold Valve Accessories
Accessories Manifold Valve Accessories DIELECTRIC KITS The dielectric kit is designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection.
More informationinstrument manifolds Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8
Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8 Special Application Manifolds Trifold 3 Valve 9 Rotofold 3 Valve 12 Pentafold 5 Valve 15 Mounting
More informationData Sheet Model F5509 and F6509 Stainless steel differential pressure gauge
FEATURES 316L Stainless steel case and wetted parts Static pressure 16 bar or 40 bar Ingress protection IP66/NEMA 4X Compliant to DIN 16003 Dry or liquid filled Optional S3 solid front case TYPICAL USES
More informationFLUID POWER PRODUCTS WINTERS INSTRUMENTS. MANUFACTURER OF INDUSTRIAL INSTRUMENTATION
FLUID POWER PRODUCTS www.winters.com MANUFACTURER OF INDUSTRIAL INSTRUMENTATION PFP-ZR Premium Stainless Steel StabiliZR Gauge PFP-ZR utilizes a precision designed dampening mechanism to minimize the effects
More informationANDERSON GREENWOOD SERIES M9 BLOCK AND BLEED GAUGE VALVES
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation FEATURES GENERAL APPLICATION
More informationSECTION PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY
SECTION 230533 - PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Static pressure
More informationScrewed Bonnet Needle Valves. Needle Valves
89 Design & Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.172 to.438 in. Flow Coefficients (Cv) from.37 to 2.7 Straight or angle flow patterns Optional panel mount Handle options available
More informationManifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS for Direct Mounting DP Transmitters Introduction The Anderson Greenwood SaddleMount has been developed to overcome the problems associated with traditional transmitter/manifold
More informationSERIES 2100 Resilient Seated Butterfly Valves
SERIES 2100 Resilient Seated Butterfly Valves Publication S2100-101 Issue 06/16 Rev. C Design Characteristics Applications Commercial Heating & Air Conditioning Waste Water & Water Treatment Sea Water
More informationDescription & Features: Applications:
Description & Features: Most economical, all-purpose pressure gauge.5" (40mm) to 4" (00mm) sizes Friction bezel rings Black steel case Brass internals ±3-2-3% accuracy CRN registered 5 year warranty Applications:
More informationSECTION METERS AND GAGES FOR PLUMBING PIPING
PART 1 GENERAL 1.01 SECTION INCLUDES A. Positive displacement meters. B. Flow meters. SECTION 22 0519 METERS AND GAGES FOR C. Pressure gages and pressure gage taps. D. Thermometers and thermometer wells.
More informationfor ethanol applications
Biofuels Pressure and Temperature Instrumentation for ethanol applications WIKA Instrument Corporation manufactures products engineered with specific design features and gauge options optimized for utilization
More informationPressure & Temperature Instrumentation Catalogue
Pressure & Temperature Instrumentation Catalogue A Trusted Supplier for all Industries. May 2018 Products to Trust Quality and Service Unified Valve Group Ltd. prides itself as innovators in the industry
More informationClass 1 as per EN o C to 65o C 15 kg/cm2 ( without thermowell ) 120 % of Full Scale 8 mm ½ BSP (M) Adjustable
Special Features & tex approved electrical contacts. Inert gas filled expansion system. Stainless steel case & stem With or without thermowell Silicon oil filled (optional) Standard followed EN 90. pplication
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for
More informationpressure gauges Price List PGP-11 Effective 1/1/11 HOW TO SPECIFY A COMPLETE PRESSURE GAUGE MODEL NUMBER: 4510 S R 2 L 1 C6A G Dial Size/Model
Price List PGP-11 Effective 1/1/11 Thermometers Pressure Gauges Transmitters pressure gauges For complete how to order instructions see our Pressure Gauge brochure HOW TO SPECIFY A COMPLETE PRESSURE GAUGE
More informationSERIES 2200 Replaceable Seat Butterfly Valves
SERIES 2200 Replaceable Seat Butterfly Valves Publication S2200-101 Issue 04/18 Rev. A Design Characteristics Multiple Seat Options VSI offers various seat options including EPDM, NBR, Viton, and others
More informationMid-West Instrument. Piston Type Differential Pressure Gauges Switches & Transmitters Model 123
BULLETIN NO. 123/11 (SUPERSEDES BULLETIN NO. 123/03) Piston Type Differential Pressure Gauges Switches & Transmitters A low cost differential pressure gauge for use in measuring the pressure drop across
More informationMid-West Instrument. Piston Type Model 220. Hazardous Locations. Indicating / Non-Indicating Differential Pressure Switch or Transmitter
BULLETIN NO. 220/11 (SUPERSEDES BULLETIN NO. 220/06) Mid-West Instrument Piston Type Model 220 Hazardous Locations Indicating / Non-Indicating Differential Pressure Switch or Transmitter Low cost piston
More informationAll Stainless Steel Pressure Gauge Bayonet Ring(Ope n Front)
Bayonet Ring(pe n Front) Typical Applications : Safety Pattern(Safet y Case) Solid Front / Blow -ut B ack pen Front Removable Ring Copper Allo y, 316SS or Monel Wetted Parts Field Liquid Fillable Zero
More informationSAMPLE PRODUCT SPECIFICATIONS
SAMPLE PRODUCT SPECIFICATIONS Thermometers & Gauges Product Guide Specification THERMOMETERS & GAUGES Specifier Notes: This section covers Miljoco Corporation thermometers and pressure gauges suitable
More informationmetering valves Metering Valves Index 1300 Series Series Series 8
Metering Valves Index 1300 Series 1 0 Series 300 Series HOKE Inc. PO Box Spartanburg, SC 9305- Phone () 57-79 Fax () 57-50 www.hoke.com Sales-hoke@circor.com metering valves Milli-Mite 1300 Series Forged
More informationANDERSON GREENWOOD. Hand Valves and Accessories INSTRUMENTATION PRODUCTS. Soft Seated Valves Hard Seated Valves Mini Valves
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Hand Valves and Accessories Soft Seated Valves Hard Seated Valves Mini Valves Anderson Greenwood is the industry leader in instrument valve technology and the
More informationSPECIALITY GAUGES PRICOL ENGINEERING INDUSTRIES LIMITED QUALITY ACCURACY RELIABILITY. Passion to Excel
SPECIALITY GAUGES PRESSURE TEMPERATURE VACUUM REFRIGERATION TEST GAUGES LOAD TESTING DIGITAL THERMOWELLS DIAPHRAGM SEALS ACCESSORIES QUALITY ACCURACY RELIABILITY PRICOL ENGINEERING INDUSTRIES LIMITED Passion
More information"S" Series Needle/Gauge Valves
"S" Series Needle/Gauge Valves Autoclave Engineer s S Series needle and gauge valves have been engineered to provide reliable service and versatility in meeting specific process requirements. Valve heads
More informationPORTER FLOWMETERS & FLOW CONTROLLERS. Technology you can trust
PORTER FLOWMETERS & FLOW CONTROLLERS Technology you can trust PORTER PRECISION FLOWMETERS AND FLOW CONTROLLERS you can trust Porter Instrument Company, Inc. is a leading manufacturer of specialized components
More informationPALMER PRESSURE GAUGES
PALMER PRESSURE GAUGES Featuring Palmer s ISO 9001:2008 CERTIFIED QUALITY MANAGEMENT SYSTEM www.palmerwahl.com 1-800-421-2853 Pressure Gauge Table of Contents 25BB Brass Case Gauge 45TS Solid Front Process
More informationneedle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
More informationneedle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
More informationMid-West Instrument. Piston Type Differential Pressure Gauges Switches & Transmitters Model 120
BULLETIN NO. 120/11 (SUPERSEDES BULLETIN NO. 120/02) Piston Type Differential Pressure Gauges Switches & Transmitters A low cost differential pressure gauge for use in measuring the pressure drop across
More informationGuide Specification SECTION HYDRONIC PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY
SECTION 23 21 16 - HYDRONIC PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Air
More informationPISTON STYLE GAUGE. For Installation and Operation Manuals Please Visit: Mid-West Instrument
PISTON STYLE GAUGE For Installation and Operation Manuals Please Visit: www.midwestinstrument.com/literature Mid-West Instrument BULLETIN NO. 120/11 (SUPERSEDES BULLETIN NO. 120/02) Mid-West Instrument
More informationData Sheet 1009 Stainless Steel Case Gauge
Data Sheet FEATURES Meets ASME B40.100 specifications Corrosion resistant SS case Dry gauges are field fillable PowerFlex movement provides superior resistance to shock, vibration and pulsation True Zero
More informationHydraulic Valves Needle Valves
Table of Contents 1 Hydraulic Valves Needle Valves TMN Series FFG 2000 Series FFA 2000 Series 2-3 4-5 6-7 Check Valves C Series 8-9 Flow Controls TMF Series 10-11 Low Pressure Ball Valve S95 NPT Series
More informationGeneral Service Gauges
Utility HVAC Diaphragm General Service Gauges The Weiss Series TL Gauges are intended for general service conditions, for pressure or vacuum on air, oil, water, gas or other mediums that do not attack
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C Industries strives to earn your business by offering an extensive line of high quality products with a proven track
More informationMarsh Instruments. Marshalltown Value Series Gauge. Specifications. X-Mas Tree Gauge. Specifications. belgas.net 1
Marsh Instruments Marshalltown Value eries Gauge AME Grade B Extra avings with Quantity Pricing 4 tandard Mounting Options: LM, CB, Right & Left (1.5" Only) Marshalltown Value eries are the most economical,
More informationSECTION METERS AND GAUGES FOR HVAC PIPING
SECTION 23 05 19 METERS AND GAUGES FOR HVAC PIPING PART 1 - GENERAL 1.1 SUMMARY A. Work included: Provision of materials, installation and testing of: 1. Thermometers 2. Thermometer Wells 3. Differential
More informationSAMPLE CYLINDERS. Sample Cylinders & Accessories. Spun End Cylinders. Ultra-Seal Constant Pressure Cylinders. VP Series Cylinder Valves
SAMPLE CYLINDERS T H E S O L U T I O N F O R G A S S A M P L E S T O R A G E Sample Cylinders & Accessories ISO 9001:2008 Certified Quality System Spun End Cylinders Ultra-Seal Constant Pressure Cylinders
More informationMid-West Instrument. Piston Type Differential Pressure Gauges Switches & Transmitters Model 124
BULLETIN NO. 124/12 (SUPERSEDES BULLETIN NO. 124/11) Mid-West Instrument Piston Type Differential Pressure Gauges Switches & Transmitters A low cost differential pressure gauge for use in measuring the
More informationfor biodiesel applications
Biofuels Pressure and Temperature Instrumentation for biodiesel applications WIKA Instrument Corporation manufactures products engineered with specific design features and gauge options optimized for utilization
More informationMANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No.
A Trusted Name in Valves and Fittings Mfg & Exp. : Valves & Fittings MANIFOLDS VALVE ISO 9001:2008 COMPANY Pressure Ratings: 6,000 PSI/10,000 PSI NPT, ISO/BSP, Threads 2-,3- and 5-valves Instrument manifolds
More informationPRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES
WATER METERS VALVES & COCKS PRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES FILTER, REGULATOR & LUBRICATORS W IKA V I INSTRUMENTS
More informationInstallation Operation and Maintenance Instructions Model Contents
Contents 1.0 General 1.1 Model Number........................... 2 1.2 Specifications............................ 2 1.3 Dimensions.............................. 3 Repair Kit Materials & Part Numbers........
More information