Hudevad Integral. Technical datasheet

Transcription

1 Technical datasheet

2 Key benefits $ Sleek flat front Minimalistic design Pressure tested at high pressure Approved for district heating Historical Kundenedfald Highly flexible in size Huge range of dimensions for any room or space C Exceptional price/performance ratio Designed for maximum output and efficiency Temperature 2

3 Index Description... 4 Illustration... 5 Dimensions... 6 and length...6 Profile and depth...6 Build-in dimensions... 7 ETS/DS valve systems...8 Pressure drop diagram...9 Presetting ETS/DS...9 Adjustment nomograms for two-pipe system ETS/DS Output...11 Accessories Tappings

4 Description Hudevad Integral is a very robust radiator which fits into any environment. A stylish and timeless design with a flat front complying with today s heating design demands. The Integral has been a bestseller in Norway, Sweden and Denmark for decades. The flat front and the angled sides make the radiator very easy to clean and highly durable. Material Test pressure Max. operating pressure Panels: 1.25 steel plates Steel plate for front panel cover: 1.0 Convectors: 0.5 steel plates EN 10051, EN 10130, DIN bar 10 bar Max operating temperature 95 C Surface treatment Length Depth Tappings Installation Pre-treatment: Degreasing, washing and passivation Priming: Primed with water based paint in pale grey Surface treatment in accordance with DIN and EN , with sections in increments of 100 : s 255 and , with sections in increments of 100 : s 455, 555, 655 and 955 Length = nom. lgth. () , 355, 455, 555, 655 and 955 1P/10: 16 2P/20: 73 3P/30: 130 2PSL/20SL: 61 PKP/21: 73 1PK/11: 50 2PK/22: 103 3PK/33: 160 1/2 standard ETS/DS ends are 3/4 Euro cone. Wall or floor mounted (floor mounted = only PK) Brackets are included Optional extras ETS/DS built-in valve (except type 2PSL/20SL) Feet Colour Powder coated in white RAL Gloss 70 Option: Painted in other standard RAL and BS colours 4

5 Illustration Hudevad Integral Cutaway 1P/10, front view 2P/20, front view 3P/30, front view 2PSL/20SL, front view PKP/21, front view 1PK/11, front view 2PK/22, front view 3PK/33, front view 5

6 Dimensions Hudevad Integral and length 955** 655** 555** 455** 355* 255* ** / * * for heights 255 and 355 ** for heights 455, 555, 655 and 955 Depth Profile view P/10 2P/20 3P/30 2PSL/20SL PKP/21 1PK/11 2PK/22 3PK/33 6

7 Build-in dimensions Hudevad Integral Profile view P/10 2P/20 3P/30 2PSL/20SL PKP/21 1PK/11 2PK/22 3PK/33 7

8 ETS/DS valve systems ETS/DS ends are 3/4 Euro cone. ETS built-in valve system One-pipe system Flow Return CE screw connection Two-pipe system 90 27,50 Recoended Flow Return DS built-in valve system Two-pipe system Accessory ±2 Recoended Two-pipe system, with reverse return Flow Return Flow Return Accessory 8

9 Pressure drop diagram One-pipe system: Pressure drop diagram for CE screw connection Pressure drop p (mbar) Radiatorshare 50% 45% 40% 35% 30% 1 1,5 1,75 2,25 2, Pressure drop p (kpa) The lines of the diagram correspond to the number of turns of the bypass spindle (screw). Close the screw completely (right stop) and then unscrew it the number of turns required to obtain the desired radiator share. The factory-setting of the CE screw connection corresponds to a radiator share of approx. 35% Flow (l/h) Presetting ETS/DS 1. Remove the protective cap of the thermostatic sensor 2. Lift the setting ring 3. Turn the setting ring anti-clockwise until the preferred scale value aligns with the reference point 4. Let go of the setting ring Presetting can be selected between 1 and 7 in increments of 0.5. At setting N the valve is fully open. Setting in the shaded areas of the drawing above should be avoided. When the thermostatic sensor has been installed, the presetting is locked and protected against unintended adjustment. In a one-pipe system, the setting N must be used. 9

10 Adjustment nomograms for two-pipe systems ETS/DS 013G0380 For large volume flow rates RA-N RA 2000 at a P band between 0.5 K and 2 K Characteristic: Presetting ring RED: RA-N 013G0381 For small volume flow rates RA-U [bar] [kpa] RA 2000 at a P band between 0.5 K and 2 K Characteristic: Presetting ring YELLOW: RA-U 10

11 Output Hudevad Integral 1P/10 Output Water content Weight P/20 Output Water content Weight P/30 Output Water content Weight PSL/20SL Output Water content Weight

12 PKP/21 Output Water content Weight PK/11 Output Water content Weight PK/22 Output Water content Weight PK/33 3PK/33 Output Water content Weight

13 Accessories Hudevad Integral Adjustable PR feet with rosettes MB feet Tappings Tapping designation EF centre distance = radiator length - 67 EF tapping is not possible for type 2PSL/20SL A C B D E F Standard tappings: 1/2 ABCD 13

14 Tapping variations Front view (except serial tappings) ETS/DS ends are 3/4 Euro cone. Built-in valve ETS Built-in valve ETS Built-in valve ETS Built-in valve ETS 201/ / Built-in valve ETS Built-in valve ETS Built-in valve DS Built-in valve DS 211/ / / /207 Note: Serial tappings are rear view Serial Serial Serial Serial /15/18/ C A C A C A C A D D D D B C Serial /15/18/22 A C Serial A D B D B 14