FIRE RATED PRODUCTS FIRE RATED PRODUCTS

Size: px
Start display at page:

Download "FIRE RATED PRODUCTS FIRE RATED PRODUCTS"

Transcription

1 IRE RTED PRODUCTS IRE RTED DUCTLESS RETURN ILTER GRILLES Model Series 4100 Ductless Return ir ilter Grilles have been designed to compliment the Nailor range of fire rated supply diffusers. These grilles are manufactured to accommodate a throw away filter by others. The grilles have been tested and classified for use without the requirement of duct work or supplementary support, they simply lay in place. The filter grilles are available in two styles, a louvered face or an eggcrate face. Louvered ace Models 4121, 4122, 4123 Page 47 Eggcrate ace Models 4124, 4125, 4126 Page 47 Model 4123 IRE RTED DUCTLESS RETURN DMPERS OR OPTIONL GRILLE unique Nailor product that features a raised ceiling radiation damper mounted on an extended support frame above the ceiling line. It will accommodate any type of return air grille, filter grille or register manufactured from steel or aluminum. This allows the design engineer greater flexibility. Optional Grilles Models 4127, 4128, 4129 Page 50 IRE RTED PRODUCTS Model 4129 IRE RTED OPEN CE PLENUM DIUSERS Nailor 5200 Series ire Rated Plenums are designed for lay-in T-Bar. They can accommodate steel or aluminum grilles, registers or linear type slot diffusers and bar grilles. turned in leg design is available to suit lay-in type cores and a hemmed leg design is available to accommodate concealed mounting angles. Turned In Leg Model 5200 Type L Page 53 Hemmed Leg Model 5200 Type S Page 53 Model 5200 IRE RTED PLENUM SLOT DIUSERS Nailor 5500 Series Plenum Slot Diffusers are designed for lay-in T-Bar. They are available for supply and return air. The supply air models feature pattern controllers that are available in three performance styles, four slot widths, and up to four parallel slots. The return models are designed to match the look of the supply air models. 'Wiper Blade' Pattern Controller Models 5550WB, 5575WB, 5510WB, 5515WB Page 56 'Ice Tong' Pattern Controller Models 5550T, 5575T, 5510T Page 59 'lip lop' Pattern Controller Model 5575 Page 62 Return ir Models 5550R, 5575R, 5510R, 5515R Page 62 6 Models 5575, 5575R

2 IRE RTED DUCTLESS RETURN ILTER GRILLES IRE RTED DUCTLESS RETURN ILTER GRILLES RISED TYPE VOLUME CONTROL OPTION 3 HOUR RTING LY-IN CTEGORY BZZU Models: Louvered ace: 4121, 4122, 4123 Eggcrate ace: 4124, 4125, 4126 CTEGORY CBS & CBS7 Model 4123 Model Series 4100 are UL Classified ire Rated Ceiling Diffuser assemblies listed in Underwriters Laboratories ire Resistance Directory under categories "Ceiling Diffusers", "Ceiling Dampers" and "Ceiling ire Stop laps ssemblies Certified for Canada". This design meets UL time-vs-temperature test criteria and NP 90 requirements. ll diffusers are classified for use in UL/ULC restrained or unrestrained floor/ceiling and or roof/ceiling assemblies which incorporate an exposed grid suspended ceiling (lay-in T-Bar) with up to a 3 hour rating. or details of fire rated assemblies, see the current UL or ULC ire Resistance Directory. These models have been designed to compliment the Nailor range of fire rated supply diffusers. Successfully tested and classified for use without the requirement of duct work or supplementary support, they simply lay in place. They enable the ceiling plenum to be utilized as a ductless return air system and so provide an extremely economical means of fire protection in return air applications. STNDRD ETURES: Tested in accordance with NSI/UL Standard 263, "ire Tests of Building Construction and Materials", UL Standard 555C "Ceiling Dampers" and ULC S112.2 "ire Stop lap ssemblies". vailable in both popular louvered face and eggcrate face styles. ilter grille frames are constructed of corrosion-resistant steel and feature a hinged core secured by 1/4 turn fasteners. 1" (25) filter by others. Louvered face models feature fixed 45 deflection blades on 3/4" (19) centers. Eggcrate models feature a 1/2 x 1/2 x 1/2 (13 x 13 x 13) aluminum grid core. 212 (100 C) fusible link is standard (165 [ 74 C] is optional). ll models must be installed in accordance with installation instructions for UL/ULC Classification. The fixed ceiling radiation damper is standard. n adjustable version for balancing is optional (see page 48). CONSTRUCTION MTERIL: Galvanized steel frame and blades. Non-asbestos UL Classified insulation. INISH OPTIONS: W ppliance White finish is standard to match supply models. Other finishes are available. PERORMNCE DT: See non-fire rated models. Louvered ace Model 61B45. Eggcrate Model 61E. IRE RTED PRODUCTS vailable Sizes and Dimensional Data Model No. ilter Grille Ceiling Module (inches) (mm) Opened Height 1" (25) ilter Size Louvered ace 12 x x x x x x (406) 8 x 8 (203 x 203) 20 x 8 (508 x 203) 20 x 20 (508 x 508) Eggcrate ace 12 x x x x x x (406) 8 x 8 (203 x 203) 20 x 8 (508 x 203) 20 x 20 (508 x 508) Dimensions are in inches (mm). 47

3 IRE RTED DUCTLESS RETURN ILTER GRILLES DIMENSIONL DT: MODELS 4121 TO 4126 LOUVERED OR EGGCRTE CE Louvered Grille Models: 4121, 4122, 4123 Eggcrate Grille Models: 4124, 4125, 4126 UL LISTED USIBLE LINK: 212 (100 C) DMPER BLDES:, STNDRD DMPER RME:, STNDRD LOUVERED CE OR EGGCRTE CE GRILLE BLDE INSULTION: CERMIC IBER SHROUD: CERMIC IBER EXTENSION RME:, STD. GRID CLIP: 4 TTCHED, 2 ECH ON OPPOSITE SIDES SUPPLEMENTRY (OR EXISTING) GRID MEMBER LISTED SIZE 5/8" (16) CM 4" (102) STEEL ILTER GRILLE WITH HINGED CORE CM 1/4" (6) IRE RTED PRODUCTS MODELS 4121 TO 4126 LOUVERED OR EGGCRTE CE WITH V OPTION Louvered Grille Models with djustable Volume Control: 4121 V, 4122 V, 4123 V Eggcrate Grille Models with djustable Volume Control: 4124 V, 4125 V, 4126 V V djustable Volume Control Option. This UL Listed option allows the damper to be used as a balancing damper for volume control. The blades are adjusted with a 3/16" (5) hex key (by others) and perform like a butterfly damper. EXTENSION RME: GRID TTCHMENT CLIPS (4) SUPPLEMENTRY (OR EXISTING) GRID MEMBER DMPER BLDES: DMPER RME: V DJUSTBLE UL LISTED USIBLE LINK USIBLE LINK SSEMBLY LISTED SIZE - 5/8" (16) STEEL ILTER GRILLE WITH HINGED CORE. IXED 45 BLDES OR EGGCRTE CORE. CM - 1/4" (6) BLDE INSULTION THERML SHROUD 48

4 IRE RTED DUCTLESS RETURN ILTER GRILLES HOW TO ORDER OR TO SPECIY IRE RTED DUCTLESS RETURN ILTER GRILLES MODELS 4121, 4122, 4123, 4124, 4125, 4126 EXMPLE: " x 12" - W V 1. Models " x 12" or 300 mm x 300 mm, Louvered ace " x 12" or 600 mm x 300 mm, Louvered ace " x 24" or 600 mm x 600 mm, Louvered ace " x 12" or 300 mm x 300 mm, Eggcrate ace " x 12" or 600 mm x 300 mm, Eggcrate ace " x 24" or 600 mm x 600 mm, Eggcrate ace 2. Ceiling Module Size 12" x 12" 24" x 12" 24" x 24" 300 mm x 300 mm 600 mm x 300 mm 600 mm x 600 mm 3. inish W ppliance White (default) L luminum BK Black BW British White PC Prime Coat SP Special Custom Color 4. usible Link Temperature (100 C) (default) (74 C) 5. Volume Control None (default) V djustable Volume Control Notes: 1. Consult individual model as to limitations of module sizes. IRE RTED PRODUCTS SUGGESTED SPECIICTION: urnish and install Nailor Model (select one or more) 4121, 4122, 4123 (Louvered ace) or 4124, 4125, 4126 (Eggcrate ace) ire Rated Ductless Return ilter Grilles of the sizes and capacities as shown on the plans and air distribution schedules. Grilles shall include a raised type factory mounted ceiling damper and thermal shroud. ilter grilles shall be constructed of corrosion-resistant steel and feature a hinged core secured by 1/4 turn fasteners. The grilles shall be tested and classified for use without the requirement of duct work or supplementary support and enable the ceiling plenum to be utilized as a ductless return air system. (Optional: ceiling damper shall be supplied with V adjustable volume control option for field balancing). The finish shall be W ppliance White to match supply models (optional finishes are available). Diffusers shall be UL /ULC Classified fire rated ceiling diffuser assemblies as listed in the UL / ULC ire Resistance (Certifications) Directory. Diffusers shall be tested in accordance with UL Standard 263 (field assembled diffusers with ceiling dampers tested to UL Standard 555C are not acceptable) and meet all of the requirements of NP 90. Diffusers shall be classified for use in restrained or unrestrained floor/ceiling and or roof/ceiling assemblies which incorporate an exposed grid suspended ceiling with up to a 3 hour rating. 49

5 IRE RTED DUCTLESS RETURN DMPERS IRE RTED DUCTLESS RETURN DMPERS OR OPTIONL GRILLE (BY NILOR OR OTHERS) RISED TYPE 3 HOUR RTING LY-IN CTEGORY BZZU Models: 4127, 4128, 4129 CTEGORY CBS & CBS7 Model 4129 [*Grille Ordered Separately] Model Series 4100 are UL/ULC Classified ire Rated Ceiling Diffuser ssemblies listed in Underwriters Laboratories ire Resistance Directory under categories "Ceiling Diffusers", "Ceiling Dampers" and "Ceiling ire Stop laps ssemblies Certified for Canada". This design meets UL time-vs-temperature test criteria and NP 90 requirements. ll diffusers are classified for use in UL/ULC restrained or unrestrained floor/ceiling and or roof/ceiling assemblies which incorporate an exposed grid suspended ceiling (lay-in T-Bar) with up to a 3 hour rating. or details of fire rated assemblies, see the current UL or ULC ire Resistance Directory. This unique Nailor product features a raised ceiling radiation damper mounted on an extended support frame above the ceiling line. The integrity of the ceiling membrane protection is maintained by the addition of a peripheral, thermally retardant, shroud. The fire rated protected cavity allows the design engineer great flexibility. s the fire protection and integrity are supplied solely by the damper assembly, any type of return air grille, filter grille or register of steel or aluminum construction may be selected and installed in the fire rated ceiling. One such example is when a return air register with opposed blade damper is required. IRE RTED PRODUCTS STNDRD ETURES: Tested in accordance with NSI/UL Standard 263, "ire Tests of Building Construction and Materials", UL Standard 555C "Ceiling Dampers" and ULC S112.2 "ire Stop lap ssemblies". 212 (100 C) fusible link is standard (165 [ 74 C] is optional). Permits selection of any Nailor 6100 Series steel or 5100 Series aluminum return grille, which is manufactured to suit. ll models must be installed in accordance with installation instructions for UL / ULC Classification. V djustable Volume Control. Permits field balancing. The ceiling damper blades are adjusted with a hex key and perform like a butterfly damper. This option would be specified when the selected return grille has no damper and volume control is still desired (see page 51). CONSTRUCTION MTERIL: Galvanized steel frame and blades. Non-asbestos UL Classified insulation. PERORMNCE DT: Refer to relevant performance tables in catalog for grille or register selected. vailable Sizes and Dimensional Data Model No. Ceiling Module (inches) 12 x x x 24 (mm) 300 x x x 600 Opened Height 1" (25) ilter Size (406) 8 x 8 (203 x 203) 20 x 8 (508 x 203) 20 x 20 (508 x 508) 50 Dimensions are in inches (mm).

6 IRE RTED DUCTLESS RETURN DMPERS DIMENSIONL DT: MODELS 4127, 4128 ND 4129 Some Commonly Selected Grille and Register Options: 61EC (-O) Type L Steel Return ir Eggcrate Grille (Register). 6145H (-O) Steel Return ir Grille (Register). ixed 45 Deflection blades on 3/4" (19) centers. 5145H (-O) luminum Return ir Grille (Register). ixed 45 Deflection blades on 3/4" (19) centers. 7145H (-O) Premium irfoil Blade luminum Return ir Grille (Register). 61P Steel Perforated ace ilter Grille. Note: Maximum grille depth capacity for this model is 4" (102). EXTENSION RME:, STD. GRID CLIP: 4 TTCHED, 2 ECH ON OPPOSITE SIDES SUPPLEMENTRY (OR EXISTING) GRID MEMBER UL LISTED USIBLE LINK: 212 (100 C) DMPER BLDES:, STNDRD DMPER RME:, STNDRD LISTED SIZE 5/8" (16) CM 4" (102) STEEL OR LUMINUM RETURN GRILLE: LOUVERED CE OR EGGCRTE CE BLDE INSULTION: CERMIC IBER SHROUD: CERMIC IBER STEEL OR LUMINUM ILTER GRILLE WITH HINGED CORE CM 1/4" (6) MODELS 4127, 4128 ND 4129 WITH V OPTION Some Commonly Selected Grille Options: 6145H Steel Return ir Grille. ixed 45 Deflection blades on 3/4" (19) centers. 5145H luminum Return ir Grille. ixed 45 Deflection blades on 3/4" (19) centers. 61P Steel Perforated ace ilter Grille. Note: Maximum grille depth capacity for this model is 2 1/4" (57). EXTENSION RME: GRID CLIP: 4 TTCHED, 2 ECH ON OPPOSITE SIDES SUPPLEMENTRY (OR EXISTING) GRID MEMBER DMPER BLDES: DMPER RME: V DJUSTBLE UL LISTED USIBLE LINK USIBLE LINK SSEMBLY LISTED SIZE - 5/8" (16) STEEL OR LUMINUM RETURN GRILLE S REQUIRED. CM - 1/4" (6) BLDE INSULTION THERML SHROUD IRE RTED PRODUCTS 51

7 IRE RTED DUCTLESS RETURN DMPERS HOW TO ORDER OR TO SPECIY IRE RTED DUCTLESS RETURN DMPERS MODELS 4127, 4128, 4129 EXMPLE: " x 12" V 1. Models " x 12" or 300 mm x 300 mm " x 12" or 600 mm x 300 mm " x 24" or 600 mm x 600 mm 2. Ceiling Module Size " x 12" " x 12" " x 24" mm x 300 mm mm x 300 mm mm x 600 mm 3. usible Link Temperature (100 C) (default) (74 C) 4. Volume Control None (default) V djustable Volume Control IRE RTED PRODUCTS SUGGESTED SPECIICTION: urnish and install Nailor Model (select one or more) 4127, 4128, 4129 ire Rated Ductless Return Ceiling Dampers (Open ace for compatible aluminum or steel grille by Nailor) of the sizes and capacities as shown on the plans and air distribution schedules. Diffusers shall include a raised type factory mounted ceiling damper and thermal shroud. The diffusers shall be successfully tested and classified for use without the requirement of ductwork or supplementary support and enable the ceiling plenum to be utilized as a ductless return air system. (Optional: ceiling damper shall be supplied with V adjustable volume control option for field balancing). Diffusers shall be UL /ULC Classified fire rated ceiling diffuser assemblies as listed in the UL /ULC ire Resistance (Certifications) Directory. Diffusers shall be tested in accordance with UL Standard 263 (field assembled diffusers with ceiling dampers tested to UL Standard 555C are not acceptable) and meet all of the requirements of NP 90. Diffusers shall be classified for use in restrained or unrestrained floor/ceiling and or roof/ceiling assemblies which incorporate an exposed grid suspended ceiling with up to a 3 hour rating. 52

STEEL LOUVERED DIFFUSERS [CFM Range is only a guide. See Manufacturer Catalog for complete data. All NC Levels in Acceptable Range<32.

STEEL LOUVERED DIFFUSERS [CFM Range is only a guide. See Manufacturer Catalog for complete data. All NC Levels in Acceptable Range<32. STEEL LOUVERED DIFFUSERS TUTTLE & BAILEY Model 1300 - Round Neck Steel, Lay-In Tee Bar Mounting Neck Size Panel Size CFM Range Price Each Volume Damper Model RBN *6 12 x 12 75-180 $19 $12 6 24 x 24 75-180

More information

EGG CRATE RETURN GRILLE

EGG CRATE RETURN GRILLE 80 EGG CRATE RETURN GRILLE 80 The 80 Series is available in various mounting styles and features sturdy construction, consisting of a heavy gauge aluminum grid core, optional extruded aluminum borders

More information

CEILING DAMPERS GENERAL PRODUCT OVERVIEW CEILING DAMPERS MODELS 0716, , 0714 & 0722 FOR SQUARE, RECTANGULAR OR ROUND DUCTS

CEILING DAMPERS GENERAL PRODUCT OVERVIEW CEILING DAMPERS MODELS 0716, , 0714 & 0722 FOR SQUARE, RECTANGULAR OR ROUND DUCTS GENERAL PRODUCT OVERVIE Since 97, Nailor Industries has been committed to the innovation and development of life safety products such as the 0700 Series Ceiling Dampers. This commitment has helped foster

More information

CEILING DIFFUSERS D12 CEILING DIFFUSERS

CEILING DIFFUSERS D12 CEILING DIFFUSERS PREMIUM This perforated return has an extruded aluminum frame with a narrow border that is visible within the T-Bar module. See Model Series 4330 and 4330CB for the matching supply air diffusers. Flush

More information

LINEAR DIFFUSERS AND BAR GRILLES

LINEAR DIFFUSERS AND BAR GRILLES 49-240 48LL1 49-280 49-480 48LL2 Linear ar Grilles The Nailor 4900 Series provides an extruded aluminum bar grille that offers beautiful styling and efficient performance. Linear bar grilles offer a choice

More information

A1GRILLES & REGISTERS

A1GRILLES & REGISTERS 1GRILLES & REGISTERS GRILLES ND REGISTERS Contents Page No. GRILLES ND REGISTERS General Product Overview Louvered Face Grilles and Registers Models GDS, GDL - luminum - Double Deflection - Supply Models

More information

CEILING DIFFUSERS Previous View Home Contents Dimensions Specification Performance

CEILING DIFFUSERS Previous View Home Contents Dimensions Specification Performance 1 Contents Page No. General Product Overview 5 Exclusive Steel Grille, Register and iffuser Warranty 12 Square and Rectangular Pattern Ceiling iffusers 6500 - Steel - Fixed Pattern 13 6550 - Steel - djustable

More information

GRILLES AND REGISTERS

GRILLES AND REGISTERS Models 51EC, 67EC Models 51PR, 67PR Eggcrate Return and Exhaust rilles The eggcrate grilles and registers are constructed of thin, interlocked aluminum or stainless steel strips assembled in a square grid

More information

LINEAR DIFFUSERS AND BAR GRILLES

LINEAR DIFFUSERS AND BAR GRILLES LINEAR DIFFUSERS AND AR GRILLES LINEAR DIFFUSERS AND AR GRILLES LINEAR SLOT DIFFUSER PLENUMS FOR TECHZONE TYPE CEILINGS Model Series 5300TZ Plenums are designed to fit the 5000TZ Series Slot Diffusers.

More information

SERIES GB. Adjustable Slot Swirl Diffusers

SERIES GB. Adjustable Slot Swirl Diffusers SERIES G djustable Slot Swirl Diffusers PULICTION DIFFUSERS 14 OCTOER 2014 Features - Distinctive slotted architectural design - Individually adjustable slots - 4 Swirl Pattern options - Versatile Directional

More information

Nailor. Industries Inc. CEILING DAMPERS

Nailor. Industries Inc. CEILING DAMPERS Nailor Industries Inc. Contents Page No. Product Overview Ceiling Damper Basics Fire-Rated Packages Square / Rectangular Ceiling Dampers Model 07 Butterfly Type Model 07- Low Profile Butterfly Type Model

More information

MODULAR CORE CEILING DIFFUSERS

MODULAR CORE CEILING DIFFUSERS MOEL SQUARE 12345-10 MOULAR CORE SQUARE IFFUSERS ROUN NECK SQUARE 1, 2, 3 OR ROUN 4-WAY AJUSTABLE NECK SQUARE ISCHARGE ROUN PATTERN NECK Steel Model: 7500 Suffix '-O' adds a steel opposed blade damper

More information

ISSUE B, OCT Architectural Square Ceiling Diffusers. UNI & AUNI Diffusers. Advanced Air

ISSUE B, OCT Architectural Square Ceiling Diffusers. UNI & AUNI Diffusers. Advanced Air ISSUE B, OCT 2009 Architectural Square Ceiling Diffusers UNI & AUNI Diffusers Product Overview - Uni Series Architectural Ceiling Diffusers Uni Series High Performance Square Face Round Neck The Model

More information

GRILLES AND REGISTERS

GRILLES AND REGISTERS ECRATE RETURN AND EXHAUST RILLES The eggcrate grilles and registers are constructed of thin, interlocked aluminum or stainless steel strips assembled in a square grid fashion that is available in a variety

More information

LINEAR SLOT DIFFUSERS PLENUMS

LINEAR SLOT DIFFUSERS PLENUMS LINEAR SLOT DIFFUSER PLENUMS ADAPTORS FOR MODEL SERIES 5000 LINEAR SLOT CEILING DIFFUSERS Standard Models: 5350(I) 1/2" (13) Slot 5375(I) 3/4" (19) Slot 5310(I) 1" (25) Slot Modified Performance Models:

More information

CEILING DIFFUSERS CEILING DIFFUSERS

CEILING DIFFUSERS CEILING DIFFUSERS Model 4340M Model 4330CB Premium, Curved Blade Pattern Controllers The perforated diffusers in this series have an extruded aluminum frame with a narrow border that is visible within the T-Bar module.

More information

NAILOR COMMERCIAL REGISTERS, GRILLES AND DIFFUSERS

NAILOR COMMERCIAL REGISTERS, GRILLES AND DIFFUSERS INDEX CEILING DIFFUSERS... 9-2 ARCHITECTURAL (LAY-IN T-BAR)... 9-2 SQUARE (LAY-IN T-BAR ) 3 CONE... 9-2 SQUARE (LAY-IN T-BAR) 4 CONE... 9-2 SQUARE (LAY-IN T-BAR) ADJUSTABLE SLIDING TYPE... 9-2 SQUARE (PANEL

More information

D3-2. Table of Contents DISPLACEMENT VENTILATION

D3-2. Table of Contents DISPLACEMENT VENTILATION D3 Table of Contents This rectangular unit is ideal for wall or ceiling installations. B The U-shaped 180 discharge pattern and high capacity is ideal for retail spaces, commercial, or lobbies. ENGINEERING

More information

CEW SERIES CEILING EXPOSED HORIZONTAL FAN COIL UNITS

CEW SERIES CEILING EXPOSED HORIZONTAL FAN COIL UNITS CEW SERIES CEILING EXPOSED HORIZONTL FN COIL UNITS MGIC IRE BMW SERIES FN COILS RE ETLC LISTED IN CCORDNCE WITH UL 1995 ND RE SSEMBLED TO ORDER FOR COMPETITIVE DELIVERY. UNITED ELECTRIC COMPNY, L.P. 501

More information

K1-2. Table of Contents LINEAR BAR GRILLES 1500, 1500MC, 1800, 1800MC

K1-2. Table of Contents LINEAR BAR GRILLES 1500, 1500MC, 1800, 1800MC K Table of Contents, This series of extruded aluminum supply and return linear bar grilles are for ceiling, sidewall, sill (), and floor () applications. Blade thickness is 7/32., This series of extruded

More information

DRUM LOUVERS DRUM LOUVERS 45DL SERIES. Models: 45DL1 Single Vanes 45DL2 Split Vanes G151 HIGH CAPACITY LONG THROW ALUMINUM CONSTRUCTION

DRUM LOUVERS DRUM LOUVERS 45DL SERIES. Models: 45DL1 Single Vanes 45DL2 Split Vanes G151 HIGH CAPACITY LONG THROW ALUMINUM CONSTRUCTION DRUM LOUVERS 45DL SERIES HIH CAPACITY LON THROW ALUMINUM CONSTRUCTION Models: Single Vanes 45DL2 Split Vanes Suffix '-O' adds a steel opposed blade damper Models -O and 45DL2 Model Series 45DL Drum Louvers

More information

GRILLES AND REGISTERS

GRILLES AND REGISTERS HEAVY DUTY STAINLESS STEEL This grille is used mainly for return air applications that require strength and durability in corrosive or high humidity environments. The frame is welded and the blades are

More information

SECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products

SECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security

More information

CEILING DIFFUSERS. Supply Air

CEILING DIFFUSERS. Supply Air Perforated Ceiling iffusers Nailor manufactures a full range of supply air and matching return air Perforated Ceiling iffusers. he perforated face is available in both corrosion-resistant steel and aluminum,

More information

PERFORATED CEILING DIFFUSERS

PERFORATED CEILING DIFFUSERS PERFORAE MOEL PERFORAE 12345-10 CEILING SQUARE IFFUSERS ROUN NECK SQUARE ROUN NECK SUPPLY SQUARE 1, 2, 3 OR ROUN 4-WAY AJUSABLE NECK ISCHARGE PAERN Steel Models: 4320 Flush Face 4325 rop Face Aluminum

More information

SECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products

SECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security

More information

PATTERN CEILING DIFFUSERS

PATTERN CEILING DIFFUSERS PATTERN CEILING IFFUSERS Model 4260 Model 7500 Eggcrate Return This aluminum face return diffuser features 1/2" x 1/2" x 1/2" (13 x 13 x 13) eggcrate that provides a high free area. It is offered with

More information

CONCENTRIC Product Information & Applications

CONCENTRIC Product Information & Applications CONCENTRIC Product Information & pplications Concentrics s the leading manufacturer of Concentric Diffusers for the past 30 years, Ruskin Rooftop Systems offers a cost effective way of distributing air

More information

CEILING DIFFUSERS GENERAL PRODUCT OVERVIEW

CEILING DIFFUSERS GENERAL PRODUCT OVERVIEW CEILING IFFUSERS CEILING IFFUSERS GENERAL PROUCT OVERVIEW Ceiling iffusers Quality Assured Products, unobtrusive clean lines for appearance, careful engineering and professional workmanship with the backing

More information

GRILLES AND REGISTERS

GRILLES AND REGISTERS RILLES AND REISTERS DOOR/ TRANSFER RILLES Nailor provides an assortment of door grilles that are designed to be completely sight proof and unobtrusive in appearance. They are constructed using extruded

More information

GRILLES AND REGISTERS

GRILLES AND REGISTERS AIRFOIL BLADE RETURN AIR 45 DEFLECTION, 3/4 () BLADE SPACIN The airfoil blades are fixed at a 45 angle. This grille is vision proof when installed in a low or high sidewall location with grille blade deflection

More information

CEILING DIFFUSERS CEILING DIFFUSERS

CEILING DIFFUSERS CEILING DIFFUSERS "TWISTER" HIGH INUCTION STAMPE FACE The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern for a superior

More information

GRILLES AND REGISTERS

GRILLES AND REGISTERS Curved Spiral Duct rilles Nailor s unique curved spiral duct grille design offers an architecturally superior appearance and saves installation time and money by directly mounting to the duct. This eliminates

More information

AMCA International. Guide for Commissioning and Periodic Performance Testing of Fire, Smoke and Other Life Safety Related Dampers

AMCA International. Guide for Commissioning and Periodic Performance Testing of Fire, Smoke and Other Life Safety Related Dampers AMCA International Guide for Commissioning and Periodic Performance Testing of Fire, Smoke and Other Life Safety Related Dampers AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL, INC. The International

More information

PERFORATED CEILING DIFFUSERS

PERFORATED CEILING DIFFUSERS PERFORAE PERFORAE CURVE MOEL BLAE 12345-10 IFFUSERS SQUARE ROUN NECK SQUARE SUPPLYROUN NECK 4-WAY AJUSABLE ISCHARGE SQUARE ROUN NECK PAERN (SANAR) 1, 2 OR 3-WAY ISCHARGE PAERN (OPIONAL) Steel Models: 4320CB

More information

GRILLES AND REGISTERS

GRILLES AND REGISTERS RILLES AND REISTERS Models 45DL1, 45DL2 Models 813SH-O, 813DV Drum Louvers These extruded aluminum drum louvers are appropriate when high volumes of air are used and in spot heating and cooling applications.

More information

CEILING DIFFUSERS CEILING DIFFUSERS

CEILING DIFFUSERS CEILING DIFFUSERS CEILING IFFUSERS "TWISTER" HIGH INUCTION STAMPE FACE The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern

More information

GRILLES AND REGISTERS

GRILLES AND REGISTERS RILLES AND REISTERS RETURN AIR FIXED BARS This return air grille has extruded aluminum fixed blades that are reinforced for strength. Models H-HD, V-HD, FH-HD, FV-HD Page 1 Suffix '-O' adds a steel OBD

More information

LINEAR DIFFUSERS AND BAR GRILLES

LINEAR DIFFUSERS AND BAR GRILLES LINEAR DIFFUSERS AND AR GRILLES GENERAL PRODUCT OVERVIEW Linear Diffusers and ar Grilles Linear type diffusers and grilles have been developed to satisfy architectural and engineering applications that

More information

CEILING DIFFUSERS GENERAL PRODUCT OVERVIEW

CEILING DIFFUSERS GENERAL PRODUCT OVERVIEW GENERAL PROUCT OVERVIEW Ceiling iffusers Quality Assured Products, unobtrusive clean lines for appearance, careful engineering and professional workmanship with the backing of an industry leader - these

More information

Concentric Supply/Return Diffusers. Models CSR & CSR-P. Redefine your comfort zone.

Concentric Supply/Return Diffusers. Models CSR & CSR-P. Redefine your comfort zone. Concentric Supply/Return Diffusers Models CSR & CSR-P Redefine your comfort zone. www.titus-hvac.com Concentric Supply/Return Diffusers Models CSR & CSR-P Plenum CSR Rectangular Ceiling Diffuser Combination

More information

Optima EXHAUST GRILL AND AIR LOUVER. Perforated Ceiling Diffusers. Features: Standard square sizes:

Optima EXHAUST GRILL AND AIR LOUVER. Perforated Ceiling Diffusers. Features: Standard square sizes: Perforated Ceiling Diffusers OPTIMA ceiling diffuser with perforated face, are recoended for heating, ventilating and cooling in centralized air conditioning systems. Perforated face diffusers, with 4-3-

More information

Application Guidelines

Application Guidelines Grilles and Registers Application Guidelines Introduction Overview It is the intent of this section to give some basic application guidelines for the use of supply and return grilles and registers in a

More information

Volume Flow Limiters Type VFL

Volume Flow Limiters Type VFL X X Volume Flow Limiters Type Aerodynamic damper blade Sticker showing volume flow rates Set the volume flow rate Insert Volume flow limiter for insertion into ducting Circular, mechanical self-powered

More information

Incorporating V2.0. Product spec >>> > Series DD - Double deflection grilles

Incorporating V2.0. Product spec >>> > Series DD - Double deflection grilles Incorporating V2.0 Product spec >>> > Series DD - Double deflection grilles Grilles Double deflection Recommended for: Wall, ceiling & duct Supply & extract Overview Enhanced functionality As per the name,

More information

CEILING DIFFUSERS GENERAL PRODUCT OVERVIEW

CEILING DIFFUSERS GENERAL PRODUCT OVERVIEW GENERAL PROUCT OVERVIEW Ceiling iffusers Quality Assured Products, unobtrusive clean lines for appearance, careful engineering and professional workmanship with the backing of an industry leader - these

More information

Installation, Operation and Maintenance Instructions

Installation, Operation and Maintenance Instructions Document Number 474094 CRD-1WT Ceiling Radiation for Wood Truss Application Installation, Operation and Maintenance Instructions Receiving and Handling Upon receiving dampers, check for both obvious and

More information

CEILING DIFFUSERS CEILING DIFFUSERS

CEILING DIFFUSERS CEILING DIFFUSERS CEILING IFFUSERS "TWISTER" HIGH INUCTION STAMPE FACE The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern

More information

SECURITY PRODUCTS SECURITY PRODUCTS

SECURITY PRODUCTS SECURITY PRODUCTS GRILLES & REGISTERS These louvered blade grilles and registers are paired up with a lattice face plate to meet minimum security requirements. They are available for both supply and return air applications

More information

Application Guidelines

Application Guidelines Grilles and Registers Application Guidelines Introduction Overview It is the intent of this section to give some basic application guidelines for the use of supply and return grilles and registers in a

More information

SECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products

SECURITY PRODUCTS GENERAL PRODUCT OVERVIEW. Security Products GENERAL PRODUCT OVERVIEW Security Products Nailor offers a complete line of Security Grilles, Registers and Diffusers. The product line includes grilles and registers for maximum, medium and minimum security

More information

AIRODYNE CATALOGUE VOLUME CONTROL TAMPERS CONSTRUCTION / MATERIALS

AIRODYNE CATALOGUE VOLUME CONTROL TAMPERS CONSTRUCTION / MATERIALS AIRODYNE CATALOGUE VOLUME CONTROL TAMPERS CONSTRUCTION / MATERIALS Airodyne multi leaf volume control tampers have been specifically designed for use in air conditioning and ventilation system for volume,

More information

SPD SQUARE PLAQUE DIFFUSER

SPD SQUARE PLAQUE DIFFUSER SQUARE PLAQUE DIFFUSER The (SPD) has a flush appearance, making it ideal for architecturally-conscience commercial spaces, and provides industry-leading low pressure drop and sound generation with a 360

More information

Table of Contents. Diffusers DIFFUSER PLENUM (OPTIONAL) CONTROL UNIT

Table of Contents. Diffusers DIFFUSER PLENUM (OPTIONAL) CONTROL UNIT Diffusers Table of Contents Introduction In today s diverse building environment, we are seeing an expanding role of VV applications across many different market segments. While this is happening, it is

More information

Price O.R. Systems AIR CURTAIN SYSTEM

Price O.R. Systems AIR CURTAIN SYSTEM Price O.R. Systems AIR CURTAIN SYSTEM The Price Air Curtain System includes non-aspirating laminar flow diffusers directly above the surgical area with a surrounding four-sided linear slot diffuser system

More information

GRILLES AND REGISTERS

GRILLES AND REGISTERS RILLES AND REISERS CURVED SPIRAL DUC RILLES Nailor s unique curved spiral duct grille design offers an architecturally superior appearance and saves installation time and money by directly mounting to

More information

We make dampers easy for you!

We make dampers easy for you! FIRE DAMPERS & CEILING RADIATION DAMPERS We make dampers easy for you! In over 50 years of business, we ve learned how to make business easy for our customers, and dampers are no exception. We ve honed

More information

LAMINAR FLOW DIFFUSER Model DLAB

LAMINAR FLOW DIFFUSER Model DLAB Laminar & Radial Flow Diffuser LAMINAR FLOW DIFFUSER Model DLAB Application Laminar Flow diffusers are used to deliver air to surface directly underneath in a non-aspirating air pattern, with the minimum

More information

GRILLES AND REGISTERS

GRILLES AND REGISTERS Airfoil Blade Return Air Models 71FH, 7145H 45 Deflection, 3/4" (19) Blade Spacing The airfoil blades are fixed at a 45 angle. This grille is vision proof when installed in a low or high sidewall location

More information

Premium Correctional Air Distribution. The First Name in Air Diffusion.

Premium Correctional Air Distribution. The First Name in Air Diffusion. Premium Correctional Air Distribution The First Name in Air Diffusion www.anemostat.com PRODUCT DIRECTORY APPLICATIONS Stainless Steel S-Vent MAXIMUM SECURITY GRILLES NEW CONSTRUCTION page 16 page 4 &

More information

Plastic Diffusers & Grilles

Plastic Diffusers & Grilles Diffusers & Grilles No rust, no corrosion Won t fade or yellow Scratches don t show No painting or repainting Won t bend Mildew resistant Consistent smooth finish Indistinguishable from metal when installed

More information

Square/Rect. and Square Louvered Face and Plaque Face Diffuser

Square/Rect. and Square Louvered Face and Plaque Face Diffuser /Rect. and Louvered Face and Plaque Face Diffuser Series J: Easily Adjustable from Horizontal to Vertical Vertical Discharge Application: Carnes steel (SK) and aluminum (SE) louvered face diffusers are

More information

W-VI Series - Internal Make-up Air Wall Canopy

W-VI Series - Internal Make-up Air Wall Canopy W-VI Internal Make-up ir Wall Canopy With Diffuser W-VI single shell combination internal make-up air/air curtain canopy constructed of stainless steel where visible and aluminized steel where concealed.

More information

GRILLES AND REGISTERS

GRILLES AND REGISTERS Heavy Duty Steel rilles and Registers, ymnasium Strength Nailor s Heavy Duty Steel rilles and Registers are manufactured with 16 gauge steel frames and 14 gauge steel blades which gives them strength to

More information

Optional grille fixings

Optional grille fixings Optional grille fixings FIXINGS type YF Yoke Strap Nominal Grille Height 50 Hemmed Plenum or Duct 80 100 YOKE FIXING Yoke fixings are available as an option on all grille and grille/damper assemblies and

More information

SINGLE DUCT TERMINAL UNITS 30X/HQX SERIES

SINGLE DUCT TERMINAL UNITS 30X/HQX SERIES 30X/HQX SERIES 30X SERIES EXHUST 30HQX SERIES EXHUST HOSPITL GRDE QUIET TYPE WITH DISSIPTIVE SILENCER PRODUCT OVERVIEW Nailor Single Duct Exhaust Terminal Units are used to modulate exhaust flow from an

More information

Accessories. Balancing plenum PRI For balancing & equalising the airflow and attenuating the duct noise

Accessories. Balancing plenum PRI For balancing & equalising the airflow and attenuating the duct noise Halton AWE/AWU Universal Grille Horizontal air supply, suitable also for exhaust Fixed front vanes, stable throw pattern with vertical 15 deflection: AWE, no deflection: AWU Adjustable rear vanes for horizontal

More information

ACCESS DOORS. Model Model Model Model Model

ACCESS DOORS. Model Model Model Model Model MODEL 0840-6 PLENUM CCESS DOOR Nailor Model 0840-6 ultra-low leakage plenum access door provides easy access to larger plenums and equipment housings and is suitable for use in high, medium or low pressure

More information

WDD/WSD - Grille. Halton WDD/WSD. Universal Grille

WDD/WSD - Grille. Halton WDD/WSD. Universal Grille Halton WDD/WSD Universal Grille Horizontal air supply, suitable also for exhaust Adjustable vertical front vanes, adjustable horizontal rear vanes: WDD, adjustable horizontal vanes: WSD Aluminium construction

More information

Incorporating V2.1. Product spec >>> > Series ECG - Egg crate grilles

Incorporating V2.1. Product spec >>> > Series ECG - Egg crate grilles Incorporating V2.1 Product spec >>> > Series ECG - Egg crate grilles Grilles Egg crate Recommended for: Wall, ceiling & duct Extract Overview Industry standard extract grille Plastic egg crate core optional

More information

table of contents PRODUCT SUMMARY 2

table of contents PRODUCT SUMMARY 2 P R O D U C T C A T A L O G introduction Aire Technologies, Inc. is proud to present our line of air management and life safety products for integration into your HVAC system design, fabrication, or installation.

More information

(click on page links below) General & Performance Data 1. Suggested Spec 3. Accessories 4

(click on page links below) General & Performance Data 1. Suggested Spec 3. Accessories 4 HAR Variable Air Volume Diffusers Contents: (click on page links below) General & Performance Data 1 Suggested Spec 3 Accessories 4 AUCKLAND ph 09 279 5250 fax 09 275 5637 sales@temperzone.co.nz WELLINGTON

More information

GRILLES AND REGISTERS

GRILLES AND REGISTERS RILLES AND REISERS HEAVY DUY SAINLESS SEEL his grille is used mainly for return air applications that require strength and durability in corrosive or high humidity environments. he frame is welded and

More information

CEILING VENTILATOR ACCESSORIES 6393 Powers Avenue Jacksonville, Florida P: / F:

CEILING VENTILATOR ACCESSORIES 6393 Powers Avenue Jacksonville, Florida P: / F: EILING VENTILTOR ESSORIES IN-LINE PTOR KITS FOR FF UNITS 961L IN-LINE PTOR KIT Fits FF100 & FF150 For 6" Round uct Intake 982L IN-LINE PTOR KIT Fits FF400, FF500 & FF700 4 1/2" x 18 1/2" uct Intake 981L

More information

CEILING & INLINE/CABINET VENTILATORS

CEILING & INLINE/CABINET VENTILATORS Twin City Fan INDUSTRIAL PROCESS AND COMMERCIAL VENTILATION SYSTEMS CEILING & INLINE/CABINET VENTILATORS T-Series TL-Series CATALOG 4600 MARCH 2018 CEILING & INLINE VENTILATORS OVERVIEW T I TL T-Series

More information

Total comfort control

Total comfort control Total comfort control YORK ACTIVE CHILLED BEAM WITH PERFORATED RETURN DIFFUSER Table of contents Concept & Technology Air Distribution & Facade Orientation Product Features Dimensions Performance Data

More information

Cable Connection (at damper) Damper in Opened Position. (Side View) Model FQAA opposed blades BCW. Model BO-300, BO-896, BO-896-P

Cable Connection (at damper) Damper in Opened Position. (Side View) Model FQAA opposed blades BCW. Model BO-300, BO-896, BO-896-P Cable Operated s - Bowden Cable System Model FQAA The Model FQAA was developed for air balancing at the mid/duct above inaccessible ceilings with Mechanical Push-Pull adjustments at a terminal controller.

More information

Perforated Face Ceiling Diffusers

Perforated Face Ceiling Diffusers February 2011 Perforated Face Ceiling Diffusers Perforated Face Ceiling Diffuser Models PD, DFP and DPP Features NEW DROP PLQUE DESIGN 3 Model Types 1, 2, 3 or 4 way ir Patterns Extruded luminium Sections

More information

Multicore diffusers. introduction. type control. options. finish. sizes SQUARE AND RECTANGULAR DIFFUSERS

Multicore diffusers. introduction. type control. options. finish. sizes SQUARE AND RECTANGULAR DIFFUSERS SQUARE AND RECTANGULAR DIFFUSERS introduction The IC diffuser is a versatile form of air terminal offering the facility of multi directional throw patterns in a wide range of frame sizes. Each core style

More information

TURNING AIR INTO SOLUTIONS. CEILING & INLINE/CABINET VENTILATORS. T-Series TL-Series

TURNING AIR INTO SOLUTIONS. CEILING & INLINE/CABINET VENTILATORS. T-Series TL-Series TURNING AIR INTO SOLUTIONS. CEILING & INLINE/CABINET VENTILATORS T-Series TL-Series CATALOG 4600 March 2018 CEILING & INLINE VENTILATORS Overview T I TL Twin City Fan & Blower s T-Series Ceiling and TL-Series

More information

Ceiling and Inline Fans

Ceiling and Inline Fans Ceiling and Inline Fans Page Introduction.....................................2 Construction Features..............................3 Specifications and Dimension Data GC 122-184....................................4

More information

MIN/MAX PERFORMANCE IN INCHES WG

MIN/MAX PERFORMANCE IN INCHES WG Fans Roof Exhaust Direct Drive - G Model G Centrifugal Roof Exhaust fans are direct drive. These fans are specifically designed for roof mounted applications exhausting relatively clean air. Fan wheels

More information

MODEL FF/FFC CEILING AND INLINE/CABINET VENTILATORS

MODEL FF/FFC CEILING AND INLINE/CABINET VENTILATORS R MODEL FF/FFC CEILING AND INLINE/CABINET VENTILATORS APPLICATION The extremely quiet FF and FFC ventilators are used to exhaust air from a variety of commercial and institutional applications, such as

More information

Plastic Diffusers & Grilles

Plastic Diffusers & Grilles Diffusers & Grilles No rust, no corrosion Won t fade or yellow Scratches don t show No painting or repainting Won t bend Mildew resistant Consistent smooth finish Indistinguishable from metal when installed

More information

D1-2. Table of Contents MODULAR CORE DIFFUSERS. 1240, Introduction & Product Description... D1-3. Dimensional Information...

D1-2. Table of Contents MODULAR CORE DIFFUSERS. 1240, Introduction & Product Description... D1-3. Dimensional Information... D Table of Contents, These supply, ceiling diffusers feature four handremovable modular cores. Available in steel or aluminum construction. P, P These supply, ceiling diffusers feature four handremovable

More information

Incorporating V2.0. Product spec >>> > Series NV - Non vision grilles

Incorporating V2.0. Product spec >>> > Series NV - Non vision grilles Incorporating V2.0 Product spec >>> > Series NV - Non vision grilles Grilles Non-vision Recommended for: Wall & door Supply & extract Overview Block line of sight into private areas Giving adequate ventilation

More information

LELUND STOCK CATALOG

LELUND STOCK CATALOG MANUFACTURERS REPRESENTATIVES Heating Ventilation Air Conditioning Products LELUND STOCK CATALOG Grilles, Registers, Diffusers, & VAV Boxes Exhaust Fans & Gravity Ventilators Bathroom Fans Exhaust Fans

More information

OSU PROJECT NO PAGE 1 02 NOV 2006 SECTION DUCTWORK ACCESSORIES

OSU PROJECT NO PAGE 1 02 NOV 2006 SECTION DUCTWORK ACCESSORIES OSU PROJECT NO. 30-04-15 PAGE 1 PART 1 GENERAL 1.1 WORK INCLUDED A. Medium and low pressure duct accessories, sealants and tapes, flexible connectors, fire dampers, smoke dampers, combination smoke and

More information

CEILING DIFFUSERS CEILING DIFFUSERS. Aluminum Construction Model 6300R See Page D135. Fully Adjustable Horizontal/Vertical Pattern

CEILING DIFFUSERS CEILING DIFFUSERS. Aluminum Construction Model 6300R See Page D135. Fully Adjustable Horizontal/Vertical Pattern 6 Model TWR "Twister" High Induction Stamped Face The "Twister" diffuser is engineered to optimize air distribution effectiveness. This next generation diffuser has a high induction, 360 swirl pattern

More information

GRILLES AND REGISTERS

GRILLES AND REGISTERS Heavy Duty Steel rilles and Registers, ymnasium Strength Nailor s Heavy Duty Steel rilles and Registers are manufactured with 16 gauge steel frames and 14 gauge steel blades which gives them strength to

More information

B1-2. Table of Contents LOUVERED FACE DIFFUSERS

B1-2. Table of Contents LOUVERED FACE DIFFUSERS Table of Contents 2, FR,, M & M feature a round neck and four cones. & feature a round neck, four cones, and adjustable pattern controllers.,, M, & M feature a round neck and three cones. & feature a round

More information

C O L M A N. Air Distribution LINEAR SLOT DIFFUSERS CE SERIES SERIES

C O L M A N. Air Distribution LINEAR SLOT DIFFUSERS CE SERIES SERIES C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S LINEAR SLOT DIFFUSERS CE SERIES CE SERIES LINEAR SLOT DIFFUSERS CE SERIES QUALITY AND EFFICIENCY WITHOUT COMPROMISE Application Colman

More information

Product Nomenclature G-X-AB-Z 0 = Zero Degree, 1 = 15 Degree, 2 = 15 Degree (2-way)

Product Nomenclature G-X-AB-Z 0 = Zero Degree, 1 = 15 Degree, 2 = 15 Degree (2-way) Fixed Bar Grills - Series G Description Caryaire Fixed Bar Grills are ideal for Supply as well as Return air, in both Cooling as well as Heating. It can be used in high side wall or ceiling applications.

More information

FlowBar High Capacity Slot Diffuser

FlowBar High Capacity Slot Diffuser October 2016 FlowBar High Capacity Diffuser Model HT (High Throw) Model JT (Jet Throw) Features HT & JT 25mm, 38mm, 51mm, 63mm & 76mm s Ceiling or Sidewall Applications Modular or Continuous s Curved Sections

More information

Linear Slot Diffusers Model Slot 20 & Model Slot 25

Linear Slot Diffusers Model Slot 20 & Model Slot 25 Model Slot & Model Slot 25 Contents Introduction!!!!!! Page 3 Di"user Specification!!!! Page 4 Air Patterns!!!!!! Page 5 Flange Styles!!!!!! Page 6 Corner Sections!!!!! Page 7 Selection Procedure!!!! Page

More information

SD-1250 and SD-1600 Series Smoke Dampers

SD-1250 and SD-1600 Series Smoke Dampers SD-1250 and SD-1600 Series Smoke Dampers Product Bulletin Code No. LIT-1201592 Issued January 30, 2014 Supersedes October 14, 2013 Johnson Controls provides a leakage-rated damper for life safety smoke

More information

INDEX. Chapter1 0. air master. Round Ceiling Diffusers

INDEX. Chapter1 0. air master. Round Ceiling Diffusers air master Chapter1 0 INDEX A. Round ceiling diffusers 1. Fixed round ceiling diffuser...: ARDF...10.1 2. Round ceiling diffuser with adjustable pattern...: ARD...10.2 Standard sizes...10.3 Air pattern...10.3

More information

Model S3HS. Model S3VS. Vertical Blades, 0 Deflection 3/4" Spacing. Model S3VOS with Opposed Blade Damper Vertical Blades, 0 Deflection 3/4" Spacing

Model S3HS. Model S3VS. Vertical Blades, 0 Deflection 3/4 Spacing. Model S3VOS with Opposed Blade Damper Vertical Blades, 0 Deflection 3/4 Spacing model S3 Steel Return Grilles & Registers 0 Deflection 0 fixed blade deflection maximizes free area for low pressure loss and sound levels Potential line of sight into duct thru grille is acceptable using

More information

Photographer: BRUCE T. MARTIN, LFD Laminar Flow Diffuser

Photographer: BRUCE T. MARTIN, LFD Laminar Flow Diffuser Photographer: BRUCE T. MARTIN, 2011 LFD Laminar Flow Diffuser Typical Applications The LFD s non-aspirating, unidirectional, laminar flow air pattern is ideal for applications where a low velocity and

More information

C O L M A N. Air Distribution FLOOR SWIRL DIFFUSERS B SERIES SERIES

C O L M A N. Air Distribution FLOOR SWIRL DIFFUSERS B SERIES SERIES C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S FLOOR SWIRL DIFFUSERS B SERIES B SERIES B SERIES FLOOR SWIRL DIFFUSER Application: The B series floor/swirl diffusers are designed

More information