TERRACAN_HP (2.5 & 2.9)
|
|
|
- Rosalyn Potter
- 5 years ago
- Views:
Transcription
1 ENGINE SUPPORT FIXTURE Support of engine, removal and installation of the transaxle SILENT SHAFT BEARING PULLER Removal of the silent shaft rear bearing SILENT SHAFT BEARING INSTALLER Insallation of the silent shaft rear bearing BEARING INSTALLER STOPPER Guide for removal and installation of silent shaft right bearing CRANKSHAFT FRONT OIL SEAL INS. Removal & Installation of lower arm bushing(use with ) CRANKSHAFT FRONT OIL SEAL GUIDE Installation of the crankshaft front oil seal CRANKSHAFT FRONT OIL SEAL INSTALLER Installation of the front oil seal CONNECTING ROD BUSHING REPLACEMENT Replacement of connecting-rod small end bushing. 1 / 17 _HP
2 MOUNT BUSHING R & I BASE Removal and Installation of lower armm bushing (use with ) MOUNT BUSHING R & I BASE Installation of front wheel bearing CAM SHAFT OIL SEAL INS. Installation of the camshaft oil seal VALVE GUIDE INSTALLER Installation of the valve guide(use with A) CYLINDER HEAD BOLT WRENCH Removal and tightening of the cylinder head bolt A000A TORQUE ANGLE ADAPTER Installation of bolts & nuts needing an angular method VALVE SPRING COMPRESSOR Removal and installation of the valve guide. [1.1L only] VALVE SPRING COMPRESSOR Removal and installation of the intake or exhaust valve 2 / 17 _HP
3 VALVE SPRING COMP. HOLDER Removal and installation of the intake or exhaust valve VALVE STEM OIL SEAL REMOVER Remover of valve stem oil seal VALVE STEM SEAL INSTALLER Installation of the oil pump oil seal VALVE GUIDE INSTALLER Installation of valve guide SILENT SHAFT DRIVE GEAR Installation of silent shaft drive oil seal CRANKSHAFT REAR OIL SEAL INSTALLER Installation of crankshaft front oil seal CRANK SHAFT REAR OIL SEAL INS. Installation of the crankshaft rear oil seal CRANK SHAFT WRENCH Used if the crankshaft needs to be rotated to attatche the timing belt,etc 3 / 17 _HP
4 H1000 CRANKSHAFT PULLEY ADAPTER Removal or installation of the crankshaft pulley bolt(used with ) OIL PRESSURE SWITCH WRENCH Removal and installation of oil pressure switch PRESTROKE MEASURING ADAPTER Injection timing adjustment INJECTION PUMP SPROCKET PULLER Removal of the injection pump sprocket H1000 INJECTOR REMOVER Removal of Injectors H1500 COMMON RAIL FUEL RETURN PRESSURE GAUGE ADAPTER Adapter for the measurement of the fuel pressure returned in common rail FUEL PRESSURE GAUGE ADAPTER Connection between Fuel Pressure Gauge( )and Fuel Pressure Gauge Adapter( ) FUEL PRESSURE GAUGE Measuring the fuel line pressure 4 / 17 _HP
5 FUEL PRESSURE GAUGE ADAPTER Connection between the delivery pipe and fuel feed line CLUTCH ALIGNMENT ARBOR Installation of the clutch dics LOCK PIN EXTRACTOR Removal of the pin in the lock pawl rod H1000 LOCK PIN REMOVER Removal of shift fork and inter lock body pin H1100 LOCK PIN INSTALLER Installation of shaft fork and inter lock body spring FRONT OIL SEAL INSTALLER Installation of the input shaft front oil seal and rear oil seal H1000 OIL SEAL INSTALLER Press fitting of clutch housing oil sea MAINSHAFT BEARING PULLER Removal of the main shaft bearing.(use with ) 5 / 17 _HP
6 MAINSHAFT BEARING PULLER, ADAPTER Removal of the main shaft bearing.(use with ) BEARING OUTER RACE INS. Installation of the output shaft outlace BEARING INSTALLER Installation of the center bearing BEARING OUTER RACE INS. Installatin of front hub. (use with ) BEARING INSTALLER 1.Removal of the transfer drive gear taper bearing(use with ) 2.Removal of the differential ball bearing H1000 MAIN SHAFT BEARIN INS. Removal of input/out put shaft bearing H1100 LOCK NUT WRENCH Removal of main shaft lock nut OIL PRESSURE GAUGE ADAPTER Measurement of the oil pressure(use with , , ) 6 / 17 _HP
7 TRANSMISSION PRESSURE GAUGE Measurement of the oil pressure(use with and ) OIL PRESSURE GAUGE ADAPTER Measurement of the oil pressure(use with , , ) OIL SEAL INSTALLER Press fitting of the pistion into the OD clutch drim OIL PRESSURE GAUGE ADAPTER Measurement of the oil pressure.(use with , , ) PISTON SPRING COMPRESSOR SET Removal of forward multiple disc clutch assembly SPRING COMPRESSOR Removal and installation of the return spring sanp ring SPRING COMPRESSOR 1. Removal of 1st & reverse brake spring. 2. Removal of no.3 brake spring REVERSE BRAKE PISTON REM. Removal of reverse brake piston. 7 / 17 _HP
8 REACTION SLEEVE REMOVER Removal of reaction sleeve BEARING AND GEAR PULLER Removal of the transfer drive gear and bearing BEARING INSTALLER 1.Installation of the transfer drive gear and bearing 2.Installation of the transfer drive gear taper bearing BEARING INSTALLER 1. Installation go the transfer shaft rear side bearing. 2. Installation of the transfer drive gear OIL SEAL PULLER 1.Installation of the transfer drive gear and bearing 2.Installation of the transfer drive gear taper bearing RETURN SPRING COMPRESSOR SET Removal of the overdrive return spring Removal of the forward clutch spring Removal of the direct clutch spring H1000 BEARING INSTALLER Installation of rear counter shaft bearing TRANSFER BEARING OUTER RACE INS. Installation of the 1st speed gear 2nd speed gear and 1-2 synchrinizer hub 8 / 17 _HP
9 UNIVERSAL JOINT R & I Removal and installation of the unversal joint UNIVERSAL JOINT REMOVER ADAPTER Removal and installation of journal bearing.(use with ) BEARING & GEAR PULLER Removal of wheel bearing inner race from a hub DRIVE SHAFT CENTER BEARING R & I *Removal an dinstallation of he center bearing *Installation of the inner dust seal(use with ) BAR Installation of the differential outlace bearing(use with ) HANDLE Removal of the wheel bearing inner race from rear housing. (use with , ) PINION HEIGHT GAUGE SET Measurement of the drive pinion geight A000 PINION HEIGHT GUAGE SET Measurement of the drive pinion geight 9 / 17 _HP
10 A100 PINION HEIGHT GAUGE SET Measurement of the drive pinion geight H1000 PINION HEIGHT GAUGE Measurement of front differential pinion height.(6th) (Use with ) H1100 PINION HEIGHT GAUGE Measurement of front differential pinion height.(use with A000) FRONT HUB BEARING OUTER RACE INSTALLER Installation of the front hub bearing.(use with ) OIL SEAL INSTALLER Press fit for the front wheel bearing oil sea & outer race. (use with ) HUB BEARING REMOVER Removal of the front wheel bearing.(use with and ) FRONT AXLE BASE Installation of the rear axle shaft bearing retainer DRIFT 1. Removal of the pinion gear bearing. 2. Removal of the pinion bearing outer race. 10 / 17 _HP
11 END YOKE HOLDER Removal or installation of the crankshaft pulley bolt(used with ) BEARING PULLER Removal of center bearing bracket WORKING BASE Support for the differential carrier A000 LOCK NUT WRENCH Removal and installation of front hub lock nut SIDE BEARING ADJUST SPANNER Adjustment of the side bearing nut AXLE SHAFT PULLER Removal of oil pump SLIDING HAMMER Removal of the oil seal AXLE SHAFT BEARING CASE REMOVER Removla of the rear axle shaft bearing case. 11 / 17 _HP
12 A000 REMOVING PLATE 1. Removal of the pinion gear bearing. 2. Removal of the pinion bearing outer race WHEEL ALIGNMENT GAUGE ATTACHMENT Removal & installation of trailing arm bushing PINION BEARING OUTER RACE INSTALLER Installation of the differential outlace bearing(use with ) PRELOAD SOCKET Measurement of the front lower arm ball joint sarting torque(use with torque wrench) OIL SEAL INSTALLER 1. Installation of the drive pinion outer race. 2. Installation of the front hub outer bearing outer race. (use with ) BEARING INSTALLER 1. REmoval of the front wheel bearing outer race. (use with ) 2. Installation of the differential drive pinion front bearing outer race. (use with ) A000 OIL SEAL INSTALLER Installation of knuckle oil seal.(4wd) BALL JOINT DUST COVER INS. Press-fitting of the front hub to the knuckle 12 / 17 _HP
13 LOWER ARM BUSHING R & I BASE Removal and installation of the front lower arm bushing.(use with ) LOWER ARM BUSHING R & I Removal and installation of the lower arm busing A000 LOWER ARM BUSHING REMOVER Removal of lower arm bushing STEERING WHEEL PULLER Removing the steering wheel BALL JOINT PULLER Seperation of tie-rod end ball joint P/S OIL PRESSURE GAUGE 1. Measurement of the oil pressure.(use with , ) 2. Measurement of the oil pressure.(use with , , ) P/S OIL PRESSURE GAUGE ADAPTER Measuring the power steering oil pressure(use with , ) OIL PRESSURE GAUGE ADAPTER Measurement of the oil pressure(included in , ) 13 / 17 _HP
14 A-34100A AIR BAG DEPLOYMENT TOOL Airbag deployment tool A DIAGNOSIS CHECKER Wiring harness checker for each module A DEPLOYMENT ADAPTER To connect deployment tool(0957a-34100a)and airbag module(pab) A DUMMY Simulator to check the resistance of each wiring harness PISTON EXPENDER Pushing back of the front disc and rear disc brake piston TRAILING ARM BUSHING R & I Removal and installation of the lower arm bush DOOR HINGE ADJUSTING WRENCH Adjustment, removal and installation of the door hinge ORNAMENT REMOVER Trim removal 14 / 17 _HP
15 HEAD LINING CLIP REMOVER Removal of the headliner clops WINDSHILD GLASS HOLDING REMOVER Removal of the windshield molding SEALANT CUT-OUT TOOL Cutting the selalant of the windshield(use with ) SEALANT CUTTING BLADE Cutting the selalant of the windshield(use with ) SEALANT GUN Application of the sealant to the windshield DISC & HUB BOLT REMOVER Removal and installation of disc&hub assembly 119 0K CLUTCH DISC CENTERING TOOL Used to install clutch disc to the center of flywheel 120 0K ENGINE STAND ASS'Y Used to disassemble transaxle 15 / 17 _HP
16 121 0K CAM SHAFT PULLEY HOLDER Holder of camshaft pulley 122 0K RING GEAR BRAKE Protecting engine from rotating 123 0K OIL PRESSURE GAUGE Measurement of oil pressure(use with , ) 124 0K VALVE SEAL PUSHER Installing valve seal 125 0K VALVE SPRING LIFTER ARM Removal or installation of the valve spring 126 0K VALVE SPRING LIFTER PIVOT Removal or installation of the valve spring 127 0K VALVE SEAL REMOVER Removing valve seal 128 HSG1021 CAMSHAFT OIL SEAL INS. Installation of the bearing outer race. 16 / 17 _HP
17 129 HSG2001 MAIN SHAFT BEARING PULLER 1. Removal of bearing. 2. Removal of synchrozer hub 130 HSG2002 BEARING PULLER ADAPTER Measurement of fuel pressure. 131 HSG2006 LOCK PIN INSTALLER Installation of the front oil seal. 132 HSG2008 LOCK NUT WRENCH Removal of the mainshaft lock nut. 133 HSG2009 INSTALLER CAP installation of bearing. 134 HSG2010 INSTALLER Installation of bearing sleeve in over drive gear. (use with HSG2009) 17 / 17 _HP
GRANDEUR_TG (3.3) APPLICATION ENGINE SUPPORT FIXTURE Support of engine, removal and installation of the transaxle.
1 09200-38001 ENGINE SUPPORT FIXTURE Support of engine, removal and installation of the transaxle. 2 09214-32000 CRANKSHAFT FRONT OIL SEAL INS. Removal & Installation of lower arm bushing(use with 09216-21100)
05' MAGENTIS (OPTIMA)
No. Tool No. Tool name Illustration GRADE 2.0/ 2.4 2.7 2.0/ 2.7 2.4 2.0/ 2.7 2.4 1 09222-4A000 VALVE STEM SEAL INSTALLER Installation of the valve stem oil seal 2 09200-38001 ENGINE SUPPORT FIXTURE D O
03' SORENTO DSL 2.5L EM SS DS BR TRA TRM CH RT ST USE. No. Tool No. Tool Name ILLUSTRATION GRADE A O 1/8
No. Tool No. Tool Name ILLUSTRATION GRADE 1 09214-4A000 Timing chain lower front cover oil seal installer Removal and installation of intake and exhaust valves 2 09216-21100 Busing remover and insatller
MD MB MD MB MITSUBISHI DRAWER #1 MITSUBISHI DRAWER #1 MD MD MD MIT47026 MD
MB992226 SERRATION SOCKET Drawer 1 A10 10/13 MD998716-01 CRANKSHAFT WRENCH Drawer 1 D1 10/13 MB991636-01 REDUCTION BRAKE ADJUSTER - STOPPER Drawer 1 A9 10/13 MD998364-01 CAMSHAFT OIL SEAL Drawer 1 A8 10/13
K2700 (PREGIO BESTA) ILLUSTRATION EM EMA FL FLA FLB CH MT MTA AT DS SS ST BR BD 1/13. No. Tool NO. Tool name GLS2.0/2.4 GLS2.7 GSL2.0/2.4 GSL2.
1 09212-43100 SILENT SHAFT BEARING PULLER 2 09212-43200 SILENT SHAFT BEARING INSTALLER 3 09212-43300 BEARING INSTALLER STPPER 4 09214-32000 CRANKSHAFT FRNT IL SEAL INS. 5 09214-43000 CNNECTING RD BUSHING
Torque Specifications for 2003 Hyundai Tiburon (GK) 2.7L DOHC
Torque Specifications for 2003 Hyundai Tiburon (GK) 2.7L DOHC Engine Mechanical System Camshaft sprocket bolt 90 ~ 110 900 ~ 1,100 65 ~ 80 Cylinder head cover bolt 8 ~ 10 80 ~ 100 5.8 ~ 7.2 Main bearing
A 1 SERVICE SPECIFICATIONS
A1 A2 Clutch CLUTCH Specifications Pedal height (from asphalt sheet) Release point (from pedal stroke end position) Push rod play at pedal top Pedal freeplay Disc rivet head depth Disc runout Diaphragm
CYLINDER HEAD CONTINUED ON NEXT FRAME. Ref. Part No. Number Description Qty Remarks
A1 A2 A3 A4 CYLINDER HEAD 1 3TB-11101-02-00 CYLINDER HEAD ASSY...... 1 2 4H7-11133-10-00. GUIDE, INTAKE VALVE..... 4 3 93440-12052-00. CIRCLIP................. 4 4 90116-06475-00. BOLT, STUD.............
SST AND SSM. Page SST (SPECIAL SERVICE TOOLS)... C-2 SSM (SPECIAL SERVICE MATERIALS)... C-18
SST AND SSM Page SST (SPECIAL SERVICE TOOLS)... C-2 SSM (SPECIAL SERVICE MATERIALS)... C-18 C -2 SST AND SSM - SST (Special Service Tools) SST (SPECIAL SERVICE TOOLS) Illustration 011 Pan Seal Cutter Hexagon
Part No. Part No. Part No. Part No. Part No. Description
Model T Tool List Part No. Part No. Part No. Part No. Part No. Description L4681 Lug nut speed wrench - Walden Worchester T1243 Headlight rim removal tool T1349 Hub cap wrench T1387 Adjustable wrench T1902
CYLINDER HEAD CONTINUED ON NEXT FRAME. Ref. Part No. Number Description Qty Remarks
A1 A2 A3 A4 CYLINDER HEAD 1 3TB-11101-02-00 CYLINDER HEAD ASSY...... 1 2 4H7-11133-10-00. GUIDE, INTAKE VALVE..... 4 3 93440-12052-00. CIRCLIP................. 4 4 90116-06475-00. BOLT, STUD.............
SMF / DSF / DTF SMF / DSF / DTF 200
2006 SMF / DSF / DTF 200 1 The drawings in this parts book have been scaled so that parts can be easily recognized. 1 CYLINDER ASSY 2 CYLINDER ASSY Ref # Part # Description 1 410 0001A CYLINDER HEAD COVER
1. General Description
1. General Description A: SPECIFICATIONS 1. Type Transmission gear ratio Front reduction gear Rear reduction gear 2. TRANSMISSION GEAR OIL Recommended oil Final Transfer 5-forward speeds with synchromesh
1NZ-FE ENGINE CONTROL SYSTEM
PREPARATION 1NZ-FE ENGINE CONTROL SYSTEM 1NZ-FE ENGINE CONTROL SYSTEM PREPARATION SST 1 09817-33190 Sensor Socket Wrench 2 PREPARATION 1NZ-FE ENGINE CONTROL SYSTEM RECOMMENDED TOOLS 09082-00040 TOYOTA
1. General Description
1. General Description A: SPECIFICATION 1. MANUAL TRANSMISSION AND FRONT DIFFERENTIAL Type Transmission gear ratio Front reduction gear Rear reduction gear Front differential Center differential Final
Engine [P-TB216EBA] 3TNV74F-SPTB
![Engine [P-TB216EBA] 3TNV74F-SPTB](/thumbs/76/73516114.jpg "Engine [P-TB216EBA] 3TNV74F-SPTB")
Ref. 0-1 Page 0-1 How to read this Parts Catalog Part No. ENGINE 3TNV74F-SPTB 2013.7.15 P-TB216EBA Ref. 0-1 Page 0-1 Ref. 0-2 Page 0-2 CYLINDER BLOCK 26 27 5 4 12 6 4 10 4 13 11 1 23 34 23 34 7 7 7 7 28
Figure 1. - Cylinder / Cylinder Head
Page 1 of 42 Figure 1. - Cylinder / Cylinder Head Figure 1. Cylinder / Cylinder Head 1 11111-STG-00 Cylinder comp 1 2 11121-STG-00 Head comp, cylinder 1 3 11127-CHP-00 Nut, cylinder head 1 4 11141-ROA-00
BB65 BAJA BLASTER 10/15/2008
BB65 BAJA BLASTER Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 36 CYLINDER HEAD MODEL MB165, HT65 1 165-300 883099011627 CYLINDER HEAD ASSY HEAD COMP, CYLINDER 1 1 $66.00 $33.00
Katanga Mercedes 1017A Trucks, DRC
Katanga Mercedes 1017A Trucks, DRC Mercedes Benz Model 1017A Chassis N 380 113 ( 14 780087-15 2 23059 ) Engine N 353 975 10 ( 549882-999999 ) Manufactured year 1979-1990 Item Part Number Description unit
Parts Description 2 1/2 Ton Multi-Fuel Part Number NSN
Parts Description 2 1/2 Ton Multi-Fuel Part Number NSN Filter, M49C Fuel Tanker 4330-00-983- CP20452-0 0998 Tube, M49C Fuel Tanker Pickup Element, Air cleaner 2940-00-804-10912373 7898 Cable, Engine Stop
SSR200 Zongshen 200cc Dirt Bike (VIN PREVIX LZSJ)
Page 1 of 19 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > SSR200 Zongshen 200cc Dirt Bike (VIN PREVIX LZSJ) SSR200 Zongshen 200cc Dirt Bike (VIN PREVIX LZSJ) SSR200 Zongshen
E03 CYLINDER HEAD ASSY 1 BN0030 Dowel Pin 4
E01 FAN COVER ASSY 1 BN0061-1 Clip 1 2 150ZT-E01.02 BN0064 Fan Cover 1 3 BN0061-2 Bracket 1 4 150ZT-E01.04 BN0064-4 Carburetor Cooling Duct 1 5 150ZT-E01.05 BN0064-3 Decorative Cover 1 6 150ZT-E01.06 BN0063-2
PARTIAL ENGINE ASSY (2ZZ GE)
COMPONENTS 14189 140R701 7.0 (71, 62 in. lbf) Cylinder Head Cover No. 2 19 (194, 14) Radiator Support Upper 19 (194, 14) Radiator Hose Inlet Cruise Control Actuator Assy 6.0 (61, 53 in. lbf) Radiator Assy
SUSPENSION - FRONT Toyota Celica DESCRIPTION ADJUSTMENTS & INSPECTION WHEEL ALIGNMENT SPECIFICATIONS & PROCEDURES WHEEL BEARING
SUSPENSION - FRONT 1988 Toyota Celica FRONT SUSPENSION Toyota DESCRIPTION Vehicles are equipped with front wheel drive and independent MacPherson strut front suspension. Suspension consists of vertically
ATV 90 UTILITY GREEN (A2006KUB2BUSG) Page 1 of 60 AIR INTAKE ASSEMBLY
2006 ATV 90 UTILITY GREEN (A2006KUB2BUSG) Page 1 of 60 AIR INTAKE ASSEMBLY 2006 ATV 90 UTILITY GREEN (A2006KUB2BUSG) Page 2 of 60 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3303-005
ATV 50 DVX BLACK-RED (A2008KSA2BUSD) Page 1 of 60 AIR INTAKE ASSEMBLY
2008 ATV 50 DVX BLACK-RED (A2008KSA2BUSD) Page 1 of 60 AIR INTAKE ASSEMBLY 2008 ATV 50 DVX BLACK-RED (A2008KSA2BUSD) Page 2 of 60 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3303-005
FRONT RACK, BODY PANEL, AND HEADLIGHT ASSEMBLIES
FRONT RACK, BODY PANEL, AND HEADLIGHT ASSEMBLIES 0747-506 1 2506-107 1 Rack, Front - Assembly (inc. 2) 2 0411-576 1 Decal, Warning - Load 3 0441-592 4 Bushing 4 8410-835 4 Screw, Cap 5 0423-669 4 Spacer
CYLINDER HEAD. Ref. Part No. Number Description Qty Remarks
A1 A2 A3 A4 CYLINDER HEAD 1 3FA-11110-01-00 CYLINDER HEAD ASSY...... 1 2 90116-06541-00. BOLT, STUD............. 2 3 22F-11134-10-00. GUIDE, EXHAUST VALVE... 2 4 93440-10109-00. CIRCLIP.................
X Dodge / Chrysler /2. Model 44 /216 Disconnect Front Axles for. W1500 and W2500 Ram
Dodge / Chrysler 1994-1998 1 /2 Model 44 /216 Disconnect Front Axles for W1500 and W2500 Ram 15 Exploded View 16 Parts Listing ITEM NO. PART NUMBER DESCRIPTION 1 (3) Housing Axle Service 2 (1) Drive Pinion
E02 CYLINDER HEAD COVER ASSY
TNG 150cc ZT E01 FAN COVER ASSY 1 BN0061-1 Clip 1 2 150ZT-E01.02 BN0064 Fan Cover 1 3 BN0061-2 Bracket 1 4 150ZT-E01.04 BN0064-4 Carburetor Cooling Duct 1 5 150ZT-E01.05 BN0064-3 Decorative Cover 1 6 150ZT-E01.06
CYLINDER HEAD CONTINUED ON NEXT FRAME. Ref. Part No. Number Description Qty Remarks
A1 A2 A3 A4 CYLINDER HEAD 1 4BD-11101-02-00 CYLINDER HEAD ASSY...... 1 2 93440-10085-00. CIRCLIP................. 2 3 90153-06029-00. SCREW, HEXAGON........ 1 4 90430-06014-00. GASKET................ 1
1GR-FE ENGINE CONTROL SYSTEM
PREPARATION 1GR-FE ENGINE CONTROL SYSTEM 1GR-FE ENGINE CONTROL SYSTEM PREPARATION RECOMMENDED TOOLS 1 09040-00011 Hexagon Wrench Set (09043-20080) Socket Hexagon Wrench 8 (09043-20100) Socket Hexagon Wrench
ATV 300 DVX CAT GREEN (A2011KSF2BUSZ) Page 1 of 56 AIR INTAKE ASSEMBLY
2011 ATV 300 DVX CAT GREEN (A2011KSF2BUSZ) Page 1 of 56 AIR INTAKE ASSEMBLY 2011 ATV 300 DVX CAT GREEN (A2011KSF2BUSZ) Page 2 of 56 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3303-705
DRIVE AXLES. Differentials & Axle Shafts - Corvette
DESCRIPTION & OPERATION 1998-99 DRIVE AXLES Differentials & Axle Shafts - Corvette A Getrag 625 model differential is used on both the automatic and manual transmissions. Differential carrier and case
B190 8 H.P. Lawn Vacuum (1995) Page 1 of 22 Chute Assembly
245-315B190 8 H.P. Lawn Vacuum (1995) Page 1 of 22 Chute Assembly 245-315B190 8 H.P. Lawn Vacuum (1995) Page 2 of 22 Chute Assembly Ref # Part Number Qty S/P/F Description 1 681-0068 1 S CHUTE ASSEMBLY
X150 National Extreme 150cc Atv (VIN PREFIX RKKG)
Page 1 of 25 Product Information Baja Web > Product Information > Parts Lists > ATV > X150 National Extreme 150cc Atv (VIN PREFIX RKKG) X150 National Extreme 150cc Atv (VIN PREFIX RKKG) Cylinder Head [Image]
2005 Saturn L ENGINE Engine Mechanical - 3.0L (L81) - L300
Crankcase Vent Housing Removal Fig. 324: Removing & Installing Engine Vent Housing 1. Remove the hoses from the chamber. 2. Remove the chamber bolts. 3. Remove the chamber. 4. Remove the gasket material.
ENGINE CONTENTS ENGINE REMOVAL AND REINSTALLATION 3-1 ENGINE REMOVAL 3-1 ENGINE REINSTALLATION 3-5 ENGINE DISASSEMBLY 3-7 STARTER MOTER 3-7
ENGINE CONTENTS ENGINE REMOVAL AND REINSTALLATION 3- ENGINE REMOVAL 3- ENGINE REINSTALLATION 3-5 ENGINE DISASSEMBLY 3-7 3 STARTER MOTER 3-7 CYLINDER HEAD COVER 3-8 PISTON 3- MAGNETO COVER 3-3 MAGNETO ROTOR
SPECIAL SERVICE TOOLS DATE_ NOV_9_2009
SPECIAL SERVICE TOOLS DATE_ NOV_9_2009 Location Description Kit X J 100 HOG RING BUCKET HOG RING PLIERS X KM 108 AVEO KIT REMOVER/INSTALLER AVEO X KM 158 AVEO KIT REMOVER/INSTALLER AVEO X KM 00307-B AVEO
No. Description No. Descreption
1 Handle Bar 14 Hex. Bolt with Flanged Face M6x25 2 Throttle Body 15 Hex. Bolt with Flanged Face M6x20 3 Plastic Piece for Throttle Cable 16 Adjusting Screw 4 Upper Throttle Body Housing 17 Tightening
Zoom and Print Options
1 of 63 8/26/2017, 7:04 AM Vehicle» Transmission and Drivetrain» Transfer Case» Service and Repair» Procedures» Isuzu T150» Overhaul (Unit Repair)» 1. Transfer Case Disassemble Transfer Case Disassemble
KOMATSU GRADER AND DOZER SPARE PARTS
KOMATSU GRADER AND DOZER SPARE PARTS S.No Part Number Part Name Price 1 01084-02055 BOLT 2 01084-02070 BOLT 3 01530-03610 NUT 4 01531-08516 NUT 5 01580-12419 NUT 6 01582-11210 NUT 7 01582-11411 NUT 8 01582-12016
90 Utility Model Number A2013KUB2BUSZ SHARE OUR PASSION.
2013 90 Utility Model Number A2013KUB2BUSZ TM SHARE OUR PASSION. TABLE OF CONTENTS 2013 ATV 90 (Model No. A2013KUB2BUSZ) BODY PANEL AND HEADLIGHT ASSEMBLY... 1 FRONT AND REAR RACK ASSEMBLY... 2 FRAME AND
CYLINDER - CYLINDER HEAD
A1 CYLINDER - CYLINDER HEAD 1 3FA-11110-00-00 CYLINDER HEAD ASSEMBLY. 1 2 95612-06625-00. BOLT, STUD............. 2 3 22F-11134-10-00. GUIDE, EXHAUST VALVE... 2 4 93440-10109-00. CIRCLIP.................
DVX 90 MODEL NUMBER A2008KSB2BUSD (BLACK-RED) MODEL NUMBER A2008KSB2BUSE (BLACK-CAT GREEN) MORE TO GO ON. TM
2008 DVX 90 Illustrated Parts Manual MODEL NUMBER A2008KSB2BUSD (BLACK-RED) MODEL NUMBER A2008KSB2BUSE (BLACK-CAT GREEN) MORE TO GO ON. TM TABLE OF CONTENTS Black-Red (Model No. A2008KSB2BUSD) Black-Cat
2AZ-FE ENGINE CONTROL SYSTEM
PREPARATION 2AZ-FE ENGINE CONTROL SYSTEM 2AZ-FE ENGINE CONTROL SYSTEM PREPARATION SST 1 09817-33190 Sensor Socket Wrench Engine coolant temperature sensor 2 PREPARATION 2AZ-FE ENGINE CONTROL SYSTEM RECOMMENDED
DVX 300 Euro. Model Number A2012KSF2BEUK SHARE OUR PASSION.
ATV 2012ATV Illustrated Parts Manual DVX 300 Euro Model Number A2012KSF2BEUK TM SHARE OUR PASSION. TABLE OF CONTENTS 2012 ATV DVX 300 Euro (Model No. A2012KSF2BEUK) BODY PANEL AND HEADLIGHT ASSEMBLY...
CYLINDER. Ref. Part No. Number Description Qty Remarks
A1 CYLINDER 1 3R9-11111-00-00 HEAD, CYLINDER 1......... 1 2 1W2-11161-00-00 ABSORBER 1............. 2 3 (1W2-11127-00-00) ABSORBER 3............. 1 4 2X3-11181-00-00 GASKET, CYLINDER HEAD 1. 1 5 90116-08321-00
COMPONENT LOCATOR > DISASSEMBLED VIEWS
Page 1 of 26 Service Manual: AUTOMATIC TRANSAXLE - 4T65-E - OVERHAUL COMPONENT LOCATOR > DISASSEMBLED VIEWS Fig 1: Case and Associated Parts Disassembled View (1 of 4) 2004 Buick LeSabre 3.8L Eng Limited
90 Y-12 Youth. Model Number A2005H4B2BUSR (Red) Model Number A2005H4B2BUSZ (Cat Green) Illustrated Parts Manual
90 Y-12 Youth Model Number A2005H4B2BUSR (Red) Model Number A2005H4B2BUSZ (Cat Green) Illustrated Parts Manual 2005 TABLE OF CONTENTS 2005 ATV 90 Y-12 Youth Red (Model No. A2005H4B2BUSR) Cat Green (Model
BR150S Howhit Baja Reaction 150cc Go Kart (VIN PREFIX L6K)
Page 1 of 16 Product Information Baja Web > Product Information > Parts Lists > GOKART > BR150S Howhit Baja Reaction 150cc Go Kart (VIN PREFIX L6K) BR150S Howhit Baja Reaction 150cc Go Kart (VIN PREFIX
DRIVE AXLE Volvo 960 DESCRIPTION & OPERATION AXLE IDENTIFICATION DRIVE AXLES Volvo Differentials & Axle Shafts
DRIVE AXLE 1994 Volvo 960 1994 DRIVE AXLES Volvo Differentials & Axle Shafts 960 DESCRIPTION & OPERATION All 960 station wagon models use type 1041 rear axle assembly. All 960 4-door models use type 1045
MANUAL TRANSMISSION MUA 5C (4X2, 4X4) AND TREMEC T5R(4X2)
MANUAL TRANSMISSION 7B 1 RODEO TRANSMISSION MANUAL TRANSMISSION MUA 5C (4X2, 4X4) AND TREMEC T5R(4X2) CONTENTS Service Precaution...................... 7B 2 General Description..................... 7B
PREFACE. Combined with all the specialty and advantages of the same models from both domestic and abroad, 1P55FMJ is
PREFACE Combined with all the specialty and advantages of the same models from both domestic and abroad, PFMJ is one of the newly engines developed by our Co. It is characterized by strong power, low fuel-consumption
ATV I l. l u. r a. Parts Manual ARCTIC CAT. 250 cc/300 cc
2000 I l l u st ATV 250 cc/300 cc Model No. A2000ATE2AUSG (250 - Green) Model No. A2000ATE2AUSR (250 - Red) Model No. A2000ATF2AUSG (300 2x4 - Green) Model No. A2000ATF2AUSR (300 2x4 - Red) Model No. A2000ATF4AUSG
03 1 SERVICE SPECIFICATIONS
SERVICE SPECIFICATIONS STANDARD BOLT STANDARD BOLT HOW TO DETERMINE BOLT STRENGTH 031 0307K02 Bolt Type Hexagon Head Bolt Normal Recess Bolt Deep Recess Bolt Stud Bolt Weld Bolt Class 4 4T No Mark No Mark
View Catalogs Online at
Catalog ML125-5 2015Edition ML125-5 Frame Parts 12551-1 Grip, LH 12551-2 Clutch Lever Comp. 12551-3 Handlebar Switch, LH 12551-4 Rearview Mirror, LH 12551-5 Rearview Mirror, RH 12551-6 Handlebar Switch,
CYLINDER HEAD CONTINUED ON NEXT FRAME. Ref. Part No. Number Description Qty Remarks
A1 CYLINDER HEAD 1 15A-11110-01-00 CYLINDER HEAD ASSEMBLY. 1 2 93440-10085-00. CIRCLIP................. 2 3 90153-06045-00. SCREW, HEXAGON........ 1 4 90430-06014-00. GASKET................ 1 5 5H0-11133-10-00.
Illustrated Parts Manual. Model Number A2011KSF2BEUZ (Black-Cat Green) A2011KSF2BEOJ (White-Cat Green)
Illustrated Parts Manual 2 1 10 DVX 300 Euro Model Number A2011KSF2BEUZ (Black-Cat Green) A2011KSF2BEOJ (White-Cat Green) S H A R E O U R PAS S IO N. TM TABLE OF CONTENTS 2011 ATV DVX 300 Euro Black-Cat
SF90 Pmi Shifter 90cc Go Kart (VIN PREFIX LBFM)
Page 1 of 23 Product Information Baja Web > Product Information > Parts Lists > GOKART > SF90 Pmi Shifter 90cc Go Kart (VIN PREFIX LBFM) SF90 Pmi Shifter 90cc Go Kart (VIN PREFIX LBFM) SF90 Pmi Shifter
Honda 1975 Parts List ENGINE GROUP Block Ref. 1F 1 11000-377-000 CRANKCASE ASSY. 1 2F 2 11208-333-000 CAP, OIL PATH 1 2F 3 11210-377-000 PAN, OIL 1 2F 4 11291-377-000 PLUG, OIL PATH 1 1E 5 11331-377-000
CYLINDER HEAD. Ref. Part No. Number Description Qty Remarks
A1 A2 A3 A4 CYLINDER HEAD 1 1UY-11110-02-00 CYLINDER HEAD ASSY...... 1 2 3Y1-11133-11-00. GUIDE, INTAKE VALVE..... 2 3 93440-12052-00. CIRCLIP................. 2 4 90401-06001-00. BOLT, UNION............
Supercharged MK1 MR2 Part Diagrams
Supercharged MK1 MR2 Part Diagrams Created by: Charles K. (ckowalc) 1 Table of Contents PART DIAGRAM PAGE ACCELERATOR LINK 9 AIR CLEANER 10 AIR CLEANER 4AGZE 11 ALTERNATOR 4AGZE 12 ANTENNA 13 ARMREST &
S/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly
1180 S/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly 1180 S/N 1H019H - 1H310H Page 2 of 33 46" Cutting Deck Assembly 1 17982 1 S Reinforcement Spindle Plate 2 618-0430 1 S Spindle Assembly w/
PREFACE INSTRUCTIONS FOR QUOTING THE CATALOGUE. 1. DIMENSIONS Dimensions of the parts in this catalogue are indicated in unit millimeters.
PREFACE When it becomes necessary to replace parts on SUZUKI MOTORCYCLES, always use SUZUKI GENUINE PARTS which have passed a strict inspection which guarantees quality and performance. This parts catalogue
Hammerhead Rave 150. Parts Manual. This Vehicle is designed for off-road use only
Hammerhead Rave 0 Parts Manual This Vehicle is designed for off-road use only FIG. CYLINDER HEAD ASSY. 0 0 0 CYLINDER HEAD ASSY. REF NO. PART NO. DESCRIPTION REGD NO. M0-00-0 CYLINDER HEAD SUBASSY 0--00
View Catalogs Online at
ML125-5 Frame Parts 12551-1 Grip, LH 12551-2 Front Brake Lever Comp. 12551-3 Handlebar Switch, LH 12551-4 Rearview Mirror, LH 12551-5 Rearview Mirror, RH 12551-6 Handlebar Switch, RH 12551-7 Clutch Lever
X4 (GREEN) (A2000ATF2AUSG) Page 1 of 80 AIR INTAKE ASSEMBLY
2000 300 2X4 (GREEN) (A2000ATF2AUSG) Page 1 of 80 AIR INTAKE ASSEMBLY 2000 300 2X4 (GREEN) (A2000ATF2AUSG) Page 2 of 80 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3570-001 1 /P Intake,
DISASSEMBLY TRANSAXLE DISASSEMBLY AND ASSEMBLY. Part 1 Of 3
2004 Mitsubishi Truck Endeavor V6-3.8L SOHC Vehicle > Transmission and Drivetrain > Automatic Transmission/Transaxle > Service and Repair > Overhaul > F4A5A > Disassembly and Assembly DISASSEMBLY TRANSAXLE
Part list for Kawasaki H2, 1972
Part list for Kawasaki H2, 972 . Cylinder head, cylinder. . Cylinder head, cylinder. 9205-049 NUT 0 m/m 2 2 40B400 WASHER-plain 4 m/m 2 3 46E400 WASHER-spring 4 m/m 2 4 92070-036 SPARK PLUG NGK B9 HS 3
PARTS CATALOGUE EARTHLANDER REVISED 02/25/05
PARTS CATALOGUE EARTHLANDER 200 REVISED 02/25/05 INDEX ENGINE FRAME SECTION FIG # SECTION FIG # FAN COVER, SHROUD E01 FRAME F01 CYLINDER HEAD COVER E02 PLASTIC COVERS F02 CAMSHAFT,VALVE, CYLINDER HEA E03
TECHNICAL BULLETIN S /00. S-TYPE Essential Tools Specifications SERVICE DATE 2000 MY-ON S-TYPE MODEL VIN L00001-ON
SERVICE DATE 03/00 TECHNICAL BULLETIN S-TYPE Essential Tools Specifications MODEL VIN S100-01 2000 MY-ON S-TYPE L00001-ON Issue: The Service Tools required for the S-TYPE Sedan are listed below, which
ATV 90 UTILITY CALIFORNIA GREEN (A2008KUB2BCAG) Page 1 of 58 AIR INTAKE ASSEMBLY
2008 ATV 90 UTILITY CALIFORNIA GREEN (A2008KUB2BCAG) Page 1 of 58 AIR INTAKE ASSEMBLY 2008 ATV 90 UTILITY CALIFORNIA GREEN (A2008KUB2BCAG) Page 2 of 58 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description
S/N 1H019H - 1H310H Page 1 of 48 42" Cutting Deck Assembly
1170 S/N 1H019H - 1H310H Page 1 of 48 42" Cutting Deck Assembly 1170 S/N 1H019H - 1H310H Page 2 of 48 42" Cutting Deck Assembly 4 683-0254 1 S Deck Adjustment Bracket w/ Weld Nut 9 710-0528 1 /P Hex Cap
PARTS LIST FOR MECCANO No. 10 vs No. 7 & "L" 10/37? P/N Description 7/25 10/49 10/49 10/55 10/86 L 1 Perforated Strip 25 holes a
PARTS LIST FOR MECCANO No. 10 vs No. 7 & "L" 10/37? P/N Description 7/25 10/49 10/49 10/55 10/86 L 1 Perforated Strip 25 holes 50 24 24 24 24 38 1a Perforated Strip 19 holes 12 6 6 6 6 16 1b Perforated
CYLINDER HEAD. Ref. Part No. Number Description Qty Remarks
A1 CYLINDER HEAD 1 JN6-11102-00-00 HEAD, CYLINDER.......... 1 2 JN6-11133-10-00. GUIDE, VALVE............ 2 3 JN6-11181-00-00 GASKET, CYLINDER HEAD... 1 4 95817-10070-00 BOLT, FLANGE............ 4 5 99530-14016-00
1. COVER COMP CYLINDER HEAD
CONTENTS FIG. 1 COVER COMP CYLINDER HEAD FIG. 2 CAMSHAFT COMP FIG. 3 HOLDER CAMSHAFT COMP FIG. 4 CYLINDER HEAD COMP FIG. 5 CARBURETOR FIG. 6 AIR CLEANER FIG. 7 LEFT CRANKCASE COVER FIG. 8 DRIVE PULLEY
E1 Cylinder Head Cover
E1 Cylinder Head Cover 1 E0101-001-70E Cover, upper cylinder head 1 2 E0101-002-70E Cover, R. cylinder head 1 3 E0101-003-70E cover, L.cylinder head 1 4 E0101-004-70E Cap, valve chamber 2 5 E0101-005-70E
2000 Jeep Truck Cherokee 4WD L6-4.0L VIN S
2000 Jeep Truck Cherokee 4WD L6-4.0L VIN S Vehicle» Transmission and Drivetrain» Automatic Transmission/Transaxle» Service and Repair» 30-40LE (AW4) 4 Speed» Overhaul (Transmission)» Disassembly DISASSEMBLY
ENGINE MECHANICAL (4A FE)
Maintenance, Engine Mechanical (4AFE) A3 Chassis Brake pads and disc Pad thickness Disc thickness Disc runout Brake linings and drums Lining thickness Drum inside diameter Front Rear Front Rear Drum brake
GENSET ENGINE-G25/30. ITEM PART NO. DESCRIPTION QTY QTY REMARKS No. G25 G30
ITEM PART NO. DESCRIPTION QTY QTY REMARKS No. G25 G30 1 CONTENTS SHEET DESCRIPTION PAGE NO. NO. E-1 CYLINDER BLOCK, LINER AND OIL SUMP 2 E-2 CYLINDER HEAD 6 E-3 PISTON AND CONNECTING ROD ASSY 10 E-4 CRANK
View Catalogs Online at
ML150-9J Frame Parts 15091-1 Front Fairing Plate 15091-2BU Front Fairing - Blue 15091-2R Front Fairing - Red 15091-3 Front Windshield 15091-4 Headlight Assy 15091-5 Headlight Bulb 12V/35W 15091-6 Parking
ENGINE ASSEMBLY. COMPONENTS (Part 1)
1 of 32 ENGINE ASSEMBLY COMPONENTS (Part 1) 2 of 32 COMPONENTS (Part 2) 3 of 32 COMPONENTS (Part 3) 4 of 32 COMPONENTS (Part 4) 5 of 32 COMPONENTS (Part 5) 6 of 32 COMPONENTS (Part 6) 7 of 32 COMPONENTS
20.Cylinder Block. Cylinder Block A: REMOVAL ME(H4DOTC)-63 ST CRANKSHAFT STOPPER
Cylinder Block MECHANICAL 20.Cylinder Block A: REMOVAL Before conducting this procedure, drain engine oil completely. 1) Remove the intake manifold. 2)
11/14/ U. Baja Motorsports Inc. P.O. Box Phoenix, AZ Toll Free: PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 53
250U Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 53 FIG. 1 PNEUMATIC MECHANISM 1-1 250U-100 883099019951 CAMSHAFT 1 1 1-2 250U-101 883099019968 KEY, WOODRUFF 1 1 1-3 250U-102 883099019975
SERVICING SPECIFICATIONS (1) ENGINE BODY
SERVICING SPECIFICATIONS (1) ENGINE BODY (1/14) Lubricating oil capacity Oil pan depth 124 mm (4.88 in.) 7.0 L 1.85 U.S.gals. 1.54 lmp.gals. 9.5 L 2.51 U.S.gals. 2.09 lmp.gals. Oil pan depth 90 mm (3.54
Air Intake/Filtration
Air Intake/Filtration Air Intake/Filtration Ref # Part Description Qty 25 048 -S CLEANER, AIR-CANISTER (includes 2-8) 2 25 096 06-S COVER ASSMBLY,AIR CLEANER (includes 3,4) 3 24 462 07-S VALVE, DUST EJECTOR
FRONT AXLE 26-1 CONTENTS ON-VEHICLE SERVICE... 5 GENERAL INFORMATION... 2 SERVICE SPECIFICATIONS... 3 LUBRICANTS... 3 HUB AND KNUCKLE ASSEMBLY...
26-1 FRONT AXLE CONTENTS GENERAL INFORMATION... 2 SERVICE SPECIFICATIONS... 3 LUBRICANTS... 3 SPECIAL TOOLS... 3 ON-VEHICLE SERVICE... 5 Wheel Bearing Axial Play Check... 5 Hub bolt replacement... 5 HUB
CYLINDER. Ref. Part No. Number Description Qty Remarks
A1 CYLINDER 1 J38-11102-00-00 CYLINDER HEAD ASSEMBLY. 1 2 J38-11133-09-00. GUIDE, INTAKE VALVE..... 2 3 99510-12016-00 PIN, DOWEL.............. 2 4 95811-08070-00 BOLT, FLANGE............ 3 5 95811-08045-00
COMPONENT LOCATIONS B C D G F C D F G
E ABCDEF 0000 COMPONENT LOCATIONS O H B C D G F J M L K P I O N B A C D J H A E I F G N M FIG. CYLINDER HEAD ASSY. 0 0 0 PARTS MANUAL CYLINDER HEAD ASSY. M0-00-0 HEAD CYLINDER SUBASSY 0--00 PLUG SPARK(CHSA
1.6L 4-CYL - VIN [E]
![1.6L 4-CYL - VIN [E]](/thumbs/81/84172348.jpg "1.6L 4-CYL - VIN [E]")
1.6L 4-CYL - VIN [E] 1993 Nissan Sentra 1993 NISSAN ENGINES 1.6L 4-Cylinder NX, Sentra * PLEASE READ THIS FIRST * NOTE: For engine repair procedures not covered in this article, see ENGINE OVERHAUL PROCEDURES
Illustrated Parts List to
TYPE NUMBERS 0022 through 0035, 0040 through 0062, 0070, 0076,0100, 0102, 0120 through 0125, 0307, 0318,0320, 0326, 0340 through 0366, 0370 through 0378, 0382, 0385, 0390, 0391, 0394, 0398, 0402, Illustrated
2005 Toyota RAV AUTOMATIC TRANSMISSIONS U240E & U241E Overhaul
2001-05 AUTOMATIC TRANSMISSIONS U240E & U241E Overhaul APPLICATION CAUTION: Flush oil cooler and oil cooler lines prior to transaxle installation. Oil cooling system contamination may cause premature transaxle
PDFMAILER.COM Print and send PDF files as s with any application, ad-sponsored and free of charge
19.0 CYLINDER 1 82848 CYLINDER HEAD ASSY (ATV 260) 1 1a 83154 CYLINDER HEAD ASSY( ATV300) 1 2 82021 GUIDE INTAKE VALVE 2 3 82022 CIRCLIP 12 2 4 82023 BOLT M6X12 1 5 82024 GASKET 6 1 6 82025 BOLT STUD M8X25
Bearing and Seal Installation Tool T1 Clutch Assembly Stand X X X X Shift Handle Tool X X T Bearing Cup Driver X X
Bravo Sterndrive Bravo Sterndrive Tool Application Chart Part No. Description Bravo One Bravo Two Bravo Three Blackhawk 11 24156 Hex Nut 12 34961 Washer 91 12427 Shift Cable Adjustment Tool 91 17256 Bearing
PARTS CATALOGUE. Rockford Motors inc.
PARTS CATALOGUE Rockford Motors inc. INSTRUCTIONS FOR USING THE PARTS CATALOGUE 1. This catalogue covers all the items of genuine parts and tools of BRIDGESTONE 350 GTR and 350 GTO motorcycles. 2. Please
D6 Crawler S/n 37A1 & 44A1 & up
Caterpillar Service Manual D6 Crawler S/n 37A1 & 44A1 & up Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR OR IT S SUCCESSORS. CATERPILLAR AND IT S SUCCESSORS
ENGINE MECHANICAL EM SECTION CONTENTS
ENGINE MECHANICAL EM SECTION CONTENTS INTAKE MANIFOLD...EM-2 Component Parts Location...EM-2 Removal and Installation...EM-3 Inspection...EM-3 EXHAUST MANIFOLD...EM-4 Component Parts Location...EM-4 Removal
F1 CRANKCASE ASSY. NOTES: V5 Engine Model:172MM D# PART# DESCRIPTION Q'TY 1 172MM-A RIGHT CRANKCASE COMP. 1
NOTES: V5 Engine Model:172MM F1 CRANKCASE ASSY. 1 172MM-A-011200 RIGHT CRANKCASE COMP. 1 2 152MI-011010 OUTER BUSH, ENGINE SUSPENSION 2 3 152MI-011008 O-RING, 15.8 2.4 4 4 152MI-011009 INNER BUSH, ENGINE
SHEET DESCRIPTION PAGE NO. NO.
CONTENTS SHEET DESCRIPTION PAGE NO. NO. E-1 CYLINDER BLOCK, LINER AND OIL SUMP 2 E-2 CYLINDER HEAD 6 E-3 PISTON AND CONNECTING ROD ASSY 10 E-4 CRANK SHAFT 12 E-5 TIMING GEAR COVER & SEALING 14 E-6 TIMING