idrobase Innovative pressure washers Copyright Idrobase Group. All rights reserved.

Transcription

1 idrobase Innovative pressure washers 27

2 Gigante 275bar Stella Maggiore 200bar Roccia 500bar Libera Plus 300bar Libera 300bar Monster 800bar Country 250bar

3 Stella 200bar Principessa Plus 170bar Transformer 200bar Coccinella Plus 150bar Coccinella 180bar Traktor 200bar Multiplo 180bar

4 Principessa ipess 180bar Hot Water OUR MADE IN ITALY RANGE Violetta 170bar Idro P. 190bar Cold Water Singolo 150bar Motor-pump unit 200bar Special Version

5 An innovative range all Made in Italy The synthesis of advanced technology and a high level of professionalism of the staff is in the unmistakable style of each Idrobase production. The result is a range of professional and industrial h.p. pressure washers which today represent at best the spirit it of tradition and innovation that are the basis of the most authentic Made in Italy.

6 Gigante MADE IN ITALY > Hz The ultimate te h.p. washer Powerful, reliable, as required by those who use h.p. washers as a daily work tool and in the most demanding conditions to achieve the maximum cleaning in the least time and in complete safety. Gigante, the ultimate h.p. washer. CONTROL PANEL Only two switches: ON/OFF breaker switch Thermostat with switch Auxiliary circuit 24V MOTOR-PUMP DRIVE Flexible coupling with protective flange STAINLESS STEEL AISI 430 stainless steel industrial heater with liner and ventilation. Water inlet tank in AISI 304 stainless steel ACCESSORIES Very safe and easy to handle, to protect the operator 32

7 Hot Water Technical data Code Model Version Pressure Fl. rate Temperature Power Wght ZX.2207 ZX.2209 ZX / / /18 By-pass By-pass By-pass 150bar 220bar 275bar 33l/min 21l/min 18l/min C * C * C * 12.5hp (3x400V-50Hz) 12.5hp (3x400V-50Hz) 12.5hp (3x400V-50Hz) 220kg 225kg 235kg *Steam stage: 140 C See also the corresponding cold water pressure washer: Libera Plus page 46 Optional Code Description ZN.EC100B4N4N ZX.2056 ZN.EC200B4N4N ZX.2058 CDR.7062 ZX.2207 ZX.2209 H.p. hose R2 3/8" 10m, M24x1.5 F-F H.p. hose R2 5/16" 15m, M24x1.5 F-F H.p. hose R2 3/8" 20m, M24x1.5 F-F H.p. hose R2 5/16" 20m, M24x1.5 F-F Hose connection, M22x1.5 M-M ZX.2210 ZX.0334 ZX.7109 ZX.7110 CDR.0791 Hose connection, M24x1.5 M-M Professional lance 1200mm, G1/4" M-1/4" NPT-F Professional lance 1500mm, G1/4" M-1/4" NPT-F Professional stainless steel lance, 1050mm straight, G1/4" M-1/4" NPT-F C.MEG15045 C.MEG1506 C.MEG1513 CDR CDR CDR ZX ZX ZX H.p. nozzle 15 angle, flow rate 045, 1/4" NPT-M H.p. nozzle 15 angle, flow rate 06, 1/4" NPT-M H.p. nozzle 15 angle, flow rate 13, 1/4" NPT-M Rotating nozzle 400bar, flow rate 045, G1/4" F Rotating nozzle 400bar, flow rate 06, G1/4" F Rotating nozzle 400bar, flow rate 13, G1/4" F Sandblasting head complete with 4m PVC hose, stainless steel probe and h.p. nozzle 045 Sandblasting head complete with 4m PVC hose, stainless steel probe and h.p. nozzle 06 Sandblasting head complete with 4m PVC hose, stainless ss steel probe and h.p.. nozzle 13 Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice. Tubular frame set made of stove-enameled steel Cover made of thermoformed polystyrene Industrial pump 1450, with crankshaft, brass head, 3 ceramic plungers. Complete with bypass valve and glycerine-filled pressure gauge High efficiency electric motor Hz, complete with ON/OFF circuit breaker switch and 5m electric cable Motor-pump drive by flexible coupling with protective flange Pressure accumulator to attenuate water hammering Water tank made of AISI 304 stainless steel 7L capacity with float valve High pressure detergent kit Large inlet water filter Fuel filter with water drain valve Fuel tank 20L with float valve Heater with cover, stainless steel inner jacket and combustion chamber Coil double spiral tpye, length 42m Dimensions WxLxH: 790 x 900 x 1025mm Standard equipment H.p. hose R2 10m, 400bar, screw quick couplings Industrial compensating spray gun Professional lance 900mm (800mm straight SS for ZX.2210) H.p. nozzle 25 high resolution 33

8 Stella Maggiore MADE IN ITALY > Hz The industrial pressure washer Stella Maggiore is designed for continuous us heavy-duty use thanks to the belt drive that ensures longer life and higher reliability. Equipped with a 1000 pump for less wear and tear and with the advantage of 50% longer life compared to any other professional h.p. washer. For use even up to 24 consecutive hours. CONTROL PANEL Extremely simple, one ON/ OFF circuit breaker switch and thermostat with switch for hot water VISIBLE PUMP Extreme reliability: Exclusive system of water and oil seals One-piece bronze connecting rods. Lower = greater reliability BELT DRIVE No heat transfer from motor to pump. Greater possibility of use in the short and long period WATER TANK In AISI 304 stainless steel with float valve Capacity 7L 34

9 Hot Water Technical data Code Model Version Pressure Fl. rate Temperature Power Wght ZX.2213 ZX.2213-TS /15 By-pass 200bar 15l/min C * 7.5hp (3x400V-50Hz) 187kg /15 TS Total Stop 200bar 15l/min C * 7.5hp (3x400V-50Hz) 188kg *Steam stage: 140 C Optional Code Description ZX.1668 Filter kit 10" composed of: transparent 10" filter, cleanable cartridge 270mesh - 50mcrs, connection nection hose and filter tightening wrench ZN.DC100B3P3P ZN.DC150B3P3P H.p. hose R2 5/16" 10m, M22x1.5 F-F H.p. hose R2 5/16" 15m, M22x1.5 F-F ZN.DC200B3P3P H.p. hose R2 5/16" 20m, M22x1.5 F-F CDR.7062 Hose connection, M22x1.5 M-M ZX.7117 ZX.7118 CdR 80 lance, 1200mm, G1/4" M-1/4" NPT-F CdR 80 lance, 1500mm, G1/4" M-1/4" NPT-F C.MEG15045 H.p. nozzle 15 angle, flow rate 045, 1/4" NPT-M CDR.0539 Professional rotating nozzle 045 ZX Sandblasting head 1.6 with 4m PVC hose and probe Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice. Tubular frame set made of chromed steel treated with polyester Cover made of thermoformed polystyrene Industrial pump Hz, with crankshaft, bronze connecting rods, brass head, 3 ceramic plungers (99.5% alumina), exclusive water and oil sealing system, high performance stainless steel valves. Complete with thermal protection valve High efficiency electric motor Hz, complete with electric box IP55 with ON/OFF circuit breaker switch, thermostat with switch and 5m electric cable Belt drive between motor and pump Water tank made of AISI 304 stainless steel 7L capacity with float valve H.p. detergent dispensing Burner with delayed ignition Fuel tank 20L with level indicator Heater er made of grey painted steel, galvanised steel inner jacket and stainless steel chimney Coil double spiral type ø20, length 28.5m Dimensions WxLxH: 570 x 1200 x 860mm Standard equipment H.p. hose R2 5/16", 10m, 400bar, screw quick couplings Industrial compensating spray gun Professional lance 900mm H.p. nozzle 25 high resolution 35

10 Stella MADE IN ITALY >1450 > Hz 60Hz Professional h. p. washer Stella enables a perfect wash, easily, safely and effortlessly. Ideal for companies that use the pressure washer up to 8 hours a day. FRAME Made of chromed steel with protective polyester paint VISIBLE PUMP Professional, 50% less maintenance time COMFORT LINE SWIVEL ACCESSORIES When working helps well-being Kit of lift brackets Optional 36

11 Hot Water Technical data Code Model Version Pressure Fl. rate Temperature Power Wght Stella 50Hz ZX.2133 ZX.2133-TS ZX.2134 ZX.2134-TS ZX.2146 ZX.2146-TS /15 By-pass 150bar 15l/min C * 5.5hp (3x400V-50Hz) 136kg /15 TS Total Stop 150bar 15l/min C * 5.5hp (3x400V-50Hz) 137kg /15 By-pass 200bar 15l/min C * 7.5hp (3x400V-50Hz) 151kg /15 TS Total Stop 200bar 15l/min C * 7.5hp (3x400V-50Hz) 0Hz) 152kg /21 By-pass 150bar 21l/min C * 7.5hp (3x400V-50Hz) 151kg /21 TS Total Stop 150bar 21l/min C * 7.5hp (3x400V-50Hz) 152kg Stella 60Hz ZX ZX TS ZX ZX TS ZX ZX TS /15 By-pass 150bar 15l/min C * 5.5hp (3x400V-60Hz) 136kg /15 TS Total Stop 150bar 15l/min C * 5.5hp (3x400V-60Hz) 137kg /15 By-pass 200bar 15l/min C * 7.5hp (3x400V-50Hz) 151kg /15 TS Total Stop 200bar 15l/min C * 7.5hp (3x400V-50Hz) 152kg /21 By-pass 150bar 21l/min C * 7.5hp (3x400V-50Hz) 151kg /21 TS Total Stop 150bar 21l/min C * 7.5hp (3x400V-50Hz) 152kg *Steam stage: 140 C See also the corresponding cold water pressure washer: Transformer page 50 Optional Code Description ZX.2133 ZX.2133-TS ZX.2134 ZX.2134-TS ZX.2146 ZX.2146-TS ZX ZX TS ZX ZX TS ZX ZX TS ZX.1667 Filter kit 10" composed of: transparent 10" filter, cleanable cartridge 270mesh - 50mcrs, connection hose and filter tightening wrench ZX.2143 CDR.7062 ZX ZX CdR 80 lance, 900mm, with rotating nozzle flow rate 050 ZX CdR 80 lance, 900mm, with rotating nozzle flow rate 070 ZX CdR 80 lance, 900mm, with sandblast nozzle flow rate 045 ZX ZX ZX.KAC10F ZX.KAC10G ZX.KAC10V Hose for sewer nozzles 1/4" 210bar 10m, inlet M long, SS nozzle with 3 bottom holes, flow rate 070 ZX.1675 Low pressure detergent kit complete with: l.p. adjustable injector, detergent nozzle, 5L tank and chrome-plated steel tank rack High pressure detergent kit complete with: stainless steel ZX.2126 water tank with float valve and connecting hose, detergent flow regulator, 5L tank and chrome-plated steel tank rack ZN.CC100B3P3P ZN.CC150B3P3P H.p. hose R1 5/16" 15m, M22x1.5 F-F ZN.CC200B3P3P H.p. hose R1 5/16" 10m, M22x1.5 F-F H.p. hose R1 5/16" 15m, M22x1.5 F-F H.p. hose R1 5/16" 20m, M22x1.5 F-F Hose connection, M22x1.5 M-M CdR 80 lance, 900mm, with rotating nozzle flow rate 045 CdR 80 lance, 900mm, with rotating nozzle flow rate 050 CdR 80 lance, 900mm, with rotating nozzle flow rate 070 CdR 80 lance, 900mm, with sandblast nozzle flow rate 045 CdR 80 lance, 900mm, with sandblast nozzle flow rate 050 CdR 80 lance, 900mm, with sandblast nozzle flow rate 075 Hose for sewer nozzles 1/4" 210bar 10m, inlet M long, SS nozzle with 3 bottom holes, flow rate 045 Hose for sewer nozzles 1/4" 210bar 10m, inlet M long, SS nozzle with 3 bottom holes, flow rate 055 Hose for sewer nozzles 1/4" 210bar 10m, inlet M long, SS nozzle with 3 bottom holes, flow rate 070 Kit of lift brackets ZX.0982-P POM foam kit with 1L tank with extended length M quick coupling Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice. Standard d equipment Tubular frame set made of chromed steel treated with polyester Cover made of thermoformed polystyrene Professional pump 1450 (1750 on 60Hz vers.), crankshaft, brass head, 3 ceramic plungers Electric motor Hz (1750 on 60Hz vers.), complete with electric box IP55 with ON/OFF circuit breaker switch, thermostatwith switch and 5m electric cable Heater made of grey painted steel, galvanised steel inner jacket and stainless steel chimney Burner with delayed ignition Fuel tank 14L with level indicator Fuel filter with drain valve Coil double spiral type ø20, length 28.5m Dimensions WxLxH: 570 x 790 x 860mm H.p. hose 8m with screw quick couplings M22x1.5F-F long swivel Professional spray gun with female swivel ball quick coupling Lance 900mm with male quick coupling 4 quick H.p. nozzles ( ) high resolution 37

12 Principessa Plus MADE IN ITALY >1450 > Hz 60Hz The specialised h.p.. washer Principessa Plus is the answer to the needs of professional pressure washing that is easy and effortless. Particular attention given to the safety profile. The Principess Plus h.p. washer can be used up to 4 hours a day. TUBULAR FRAME SET Sturdy and durable in chromed steel PROFESSIONAL PUMP With camshaft and ceramic plungers PROFESSIONAL BURNER Ventilation independent from pump unit "COMFORT LINE" SWIVEL ACCESSORIES When working helps well-being 38

13 Hot Water Technical data Code Model Version Pressure Fl. rate Temperature Power Wght Principessa Plus 60Hz Principessa Plus 50Hz ZX.2172 ZX.2172-TS ZX.2176 ZX.2176-TS ZX ZX TS ZX ZX TS /8 By-pass 140bar 8l/min C * 3hp (1x230V-50Hz) 93kg /8 TS Total Stop 140bar 8l/min C * 3hp (1x230V-50Hz) 94kg /11 By-pass 170bar 11l/min C * 5.5hp (3x400V-50Hz) 93kg /11 TS Total Stop 170bar 11l/min C * 5.5hp (3x400V-50Hz) 94kg /8 By-pass 140bar 8l/min C * 3hp (1x230V-60Hz) 93kg /8 TS Total Stop 140bar 8l/min C * 3hp (1x230V-60Hz) 94kg /11 By-pass 170bar 11l/min C * 5.5hp (3x400V-60Hz) 93kg /11 TS Total Stop 170bar 11l/min C * 5.5hp (3x400V-60Hz) 94kg *Steam stage: 140 C See also the corresponding cold water pressure washer: Coccinella Plus page 52 Optional Code Description ZX.2172 ZX.2172-TS ZX.2176 ZX.2176-TS ZX ZX TS ZX TS ZX TS ZX.1666 ZN.AC100X2P2P ZN.AC200X2P2P CDR.7062 Inlet water filter kit 7" for dirty water composed of: transparent 7" filter, cleanable cartridge 270mesh - 50mcrs, connection hose and filter tightening wrench H.p. hose R1 1/4" 10m, M22x1.5 F-F H.p. hose R1 1/4 20m, M22x1.5 F-F Hose connection, M22x1.5 M-M ZX.1172 ZX.1173 ZX ZX CdR 80 lance, 900mm, with rotating ti nozzle flow rate 040 ZX ZX CdR 80 lance, 1200mm, inlet male swivel ball, outlet G1/4" M CdR 80 lance, 1500mm, inlet male swivel ball, outlet G1/4" M CdR 80 lance, 900mm, with rotating nozzle flow rate 025 CdR 80 lance, 900mm, with rotating nozzle flow rate 040 CdR 80 lance, 900mm, with sandblast nozzle flow rate 030 CdR 80 lance, 900mm, with sandblast nozzle flow rate 040 ZX.KAC10A ZX.0982-P Hose for sewer nozzles 1/4" 210bar 10m, SS nozzle with front hole + 3 bottom holes POM foam kit with 1L tank with extended length M quick coupling Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice. Tubular frame set made of chromed steel Cover made of thermoformed polystyrene Pump with camshaft Hz (1750 for 60Hz vers.), brass head, 3 ceramic plungers Electric motor Hz (1750 on 60Hz vers.), complete with electric box IP55 with ON/OFF circuit breaker switch, thermostat with switch and 5m electric cable Heater painted, with 3mm base Fuel tank 7L Coil double spiral type ø17, length 21m Dimensions WxLxH: 370 x 780 x 770mm Standard equipment H.p. hose 8m with screw quick couplings Professional spray gun with female swivel ball quick coupling Lance 700mm with male quick coupling H.p. nozzle 25 high resolution 39

14 Principessa MADE IN ITALY > Hz The H.P. washer for small business Principessa enables a perfect wash easily, safely and effortlessly. Ideal for all companies that use the h.p. washer up to 2 continuous hours. TUBULAR FRAME SET Sturdy and durable AXIAL PUMP WITH BRASS HEAD Sturdy: 50% less maintenance time PROFESSIONAL BURNER Ventilation independent from pump unit QUICK CONNECTION Between lance and nozzle: highly practical 40

15 Hot Water Technical data Code Model Version Pressure Fl. rate Temperature Power Wght ZX.2170 ZX.2170-TS ZX.2171 ZX.2171-TS P 130/9 By-pass 130bar 9l/min C * 3hp (1x230V) 90kg P 130/9 TS Total Stop 130bar 9l/min C * 3hp (1x230V) 91.5kg P 170/11 By-pass 170bar 11l/min C * 5hp (3x400V) 90kg P 170/11 TS Total Stop 170bar 11l/min C * 5hp (3x400V) 91.5kg *Steam stage: 140 C See also the corresponding cold water pressure washer: Violetta page 56 Optional Code Description ZX.2170 ZX.2170-TS ZX.2171 ZX.2171-TS ZX.1666 ZX.2183 ZX.2184 ZX.2185 ZN.AC100X2P2P ZN.AC200X2P2P CDR.7062 Inlet water filter kit 7" for dirty water composed of: transparent 7" filter, cleanable cartridge 270mesh - 50mcrs, connection n hose and filter tightening wrench Low pressure detergent kit complete with: l.p. adjustable injector, detergent nozzle Set of quick nozzles ( ) Set of quick nozzles ( ) H.p. hose R1 1/4" 10m, M22x1.5 F-F H.p. hose R1 1/4 20m, M22x1.5 F-F Hose connection, M22x1.5 M-M ZX.1172 ZX.1173 ZX ZX CdR 80 lance, 900mm, with rotating nozzle flow rate 040 ZX ZX CdR 80 lance, 1200mm, inlet male swivel ball, outlet G1/4" M CdR 80 lance, 1500mm, inlet male swivel ball, outlet G1/4" M CdR 80 lance, 900mm, with rotating nozzle flow rate 035 CdR 80 lance, 900mm, with rotating nozzle flow rate 040 CdR 80 lance, 900mm, with sandblast nozzle flow rate 035 CdR 80 lance, 900mm, with sandblast nozzle flow rate 040 ZX.0982-P POM foam kit with 1L tank with extended length M quick coupling Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice. Tubular frame set made of chromed steel Cover made of thermoformed polystyrene Axial pump 2800, brass head, 3 steel/ ceramic plungers. Complete with bolt unloader valve, glycerine-filled pressure gauge and thermal protection valve Electric motor Hz, complete with electric box IP55 with ON/OFF circuit breaker switch, thermostat with switch and 5m electric cable Heater painted, with 3mm base Fuel tank 7L Coil double spiral type ø17, length 21m Dimensions WxLxH: 370 x 780 x 770mm Standard equipment H.p. hose 8m with screw quick couplings Professional spray gun with female swivel ball quick coupling Lance 700mm with male quick coupling H.p. nozzle 25 high resolution, quick coupling 41

16 Monster MADE IN ITALY > Hz A "monster" for pressure washing Monster 800bar is a concentrate of power, quality and reliability designed and produced for heavy-duty continuous use. INDUSTRIAL PUMP For high pressures and flow rates, reliable and equipped with 2 valves: Max pressure safety valve Pressure regulator VERTICAL MULTISTAGE EL. PUMP To assure a steady quantity of water and pressure to the h.p. pump TRIPLE FILTERING SYSTEM Filter 150mcrs: protects the multistage pump Filter 70 and 25mcrs: protects the high pressure pump CONTROL PANEL IP 55 SOFT-START motor starting Indicator lights of emergency and operation Work hours meter Auxiliary circuit 24V 42

17 Cold Water Technical data Code Model Version Pressure Fl. rate Power Wght ZX.2280 MONSTER 800BAR By-pass 800bar 23l/min hp (3x400V-50Hz) 850kg Optional Code Description PR.RMAX750 Rotating nozzle 750bar, 50l/min, 60 C Sturdy frame set in painted steel and tubes in chromed steel on four anti-vibration feet Industrial pump 1000g/min, with crankshaft, stainless steel head Electric motor 50HP, 1000 isolation class "F" Flexible coupling for motor-pump Vertical multistage pump Stainless steel pressure gauge 1000bar Safety valve pre-calibrated and sealed Pressure regulator Safety pressure e switch lack of water Primary ry cartridge filter 10", 150 microns Double cartridge filter made of stainless steel 10", 150 micronson the multistage pump inlet Control panel complete with: master ON/OFF switch that powers the multistage electric pump switch, the soft-start motor starting. PLC for pressure switch control. Warning lights, hour meter and emergency knob for immediate shutdown Dimensions WxLxH: 1700 x 1000 x 1000mm Standard equipment H.p. hose 15m with screw quick couplings Lance with spray gun and shoulder rest with by-pass system and disposable discharge H.p. nozzle 15 made of stainless steel with sapphire insert Technical data Code Model Version Pressure Fl. rate Power Wght ZX.2280-D MONSTER 800BAR DIESEL By-pass 800bar 23l/min kW-67hp 1050kg Sturdy frame set palletised with base in painted steel Industrial pump p 1000g/min, 00g with crankshaft, stainless steel head. Forced cooling system for plungers and pressure seals Lombardini diesel engine, 50kW, 67hp, 3000, 4 cylinders, 2200cm3 liquid cooled Low pressure feeding pump Safety, regulation and controls, the machine is equipped with a safety valve for the line under pressure, a pressure regulator valve suitable for the working range, and a pressure gauge suitable to control this pressure Alarms installed, buzzer for low water level in tank. Automatic engine cut-off in the event of lack of water to the pump Water filter In intake with washable stainless steel cartridge. Filtration level 50mesh Control panel complete with: start/stop key, rpm indicator, manual accelerator, hour meter, diesel level. el. Warning ng lights: oil temperature, oil pressure, clogged ged air filter, alternator, spark plugs, emergency knob for immediate shutdown Dimensions WxLxH: 3000 x 1350 x 1750mm Standard equipment H.p. hose 20m with screw quick couplings Lance with spray gun and shoulder rest with by-pass system and disposable discharge Rotating nozzle 43

18 Roccia MADE IN ITALY > Hz H.p. washer for worksite Roccia is the answer for companies that need to perform tough, heavy-duty jobs and thus require: power for cleaning, scrubbing or sandblasting; reliability for short and long periods; safety for the operators and the machine; economy of time and money. Roccia is the ideal solution for shipyards, road yard, mining industries, etc. TUBULAR FRAME SET Sturdy with thick chrome-plating WATER TANK Made of AISI 304 stainless steel, with brass float valve 30L capacity, acit with by-pass valve recyclingcli ELECTRIC MOTOR 1450 exclusive with flexible coupling with dual flange CONTROL PANEL Star-delta starting device Master ON/OFF switch Emergency stop button Auxiliary circuit 24V 44

19 Cold Water Technical data Code Model Version Pressure Fl. rate Power Wght ZX /16 By-pass 500bar 16l/min hp (3x400v-50Hz) 280kg Optional Code Description ZN.FC200B2D2D H.p. hose R2 3/8", 20m, 500bar, G3/8" F-F CDR.0311 Industrial compensating spray gun 500bar, 80l/min, 100 C, G1/2" F-F CDR.0402 Shoulder rest, 300mm, connection M18x1,5 M, for spray gun CDR.0311 CDR.0392 CDR.0393 Stainless steel lance, 800mm, 500bar, G1/2" M-1/4" NPT-F Stainless steel lance, 1250mm, 500bar, G1/2" M-1/4" NPT-F CDR H.p. nozzle, 500bar, 25 angle, flow rate 030, 1/4" NPT-M ZX.1247 Super professional rotating nozzle 030, 500bar, 90 C, G1/4" M ZX Sandblasting head G1/4" M complete with 4m PVC hose, stainless steel probe and h.p. nozzle Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice. Tubular frame set made of chromed steel Industrial pump 1450g/min, with crankshaft, bronze connecting rods, stainless steel head, 3 ceramic plungers, stainless steel valves, "U" section water seals with antiextrusion ring. Complete with safety valve Electric motor Hzcomplete with electric box IP55 Control panel with star-delta starting device, complete with master ON/OFF switch, emergency stop button and 5m electric cable Motor-pump drive via flexible coupling housed in motor flange Water inlet filter with AISI 315 stainless ss steel el 7" cartridge Water tank made of AISI I 304 stainless steel, 30L capacity with brass float valve Dimensions WxLxH: 730 x 1200 x 850mm Standard equipment H.p. hose 10m Industrial compensating spray gun 500bar, 80l/min Professional lance 1250mm stainless steel H.p. nozzle 25 high resolution 45

20 Libera Plus MADE IN ITALY > Hz Ultimate h.p. washer Libera enables a vigorous and effective wash. Excellent for continuous heavy-duty use. Ideal for sandblasting. TUBULAR FRAME SET Made of steel with thick chrome-plating INDUSTRIAL PUMP 1450 high performance and reliability CONTROL PANEL Complete with 24V controls, hour meter and master safety switch MOTOR-PUMP DRIVE By flexible coupling 46

21 Cold Water Technical data Code Model Version Mtr-pump drive Controls Pressure Fl. rate Power Wght ZX.2268-G ZX.2268-GTS ZX.2269-G ZX.2269-GTS ZX.2270-G ZX.2270-GTS / /15 TS / /33 TS / /18 TS By-pass Total Stop By-pass Total Stop By-pass Total Stop Direct Direct Direct Direct Direct Direct ON/OFF ON/OFF ON/OFF ON/OFF ON/OFF ON/OFF 250bar 250bar 170bar 170bar 300bar 300bar 15l/min 15l/min 33l/min 33l/min 18l/min 18l/min hp (3x400V-50Hz) 10hp (3x400V-50Hz) 15hp (3x400V-50Hz) 15hp (3x400V-50Hz) 15hp (3x400V-50Hz) 15hp (3x400V-50Hz) 122kg 124kg 132kg 134kg 132kg 134kg See also the corresponding hot water pressure washer: Gigante page 32 Optional Code Description ZX.2268-G ZX.2268-GTS ZX.2269-G ZX.2269-GTS ZX.2270-G ZX.2270-GTS ZX.1418 Filter kit 10" complete with: transparent 10" filter, cleanable mesh cartridge 50mcrs and connection hose. ZX.1419 Double filter kit 10" composed of: transparent 10" double filter, wound thread cartridge 5 and 1mcr, connection hose ZN.EC100B4N4N ZX.2056 ZN.EC200B4N4N ZX.2058 ZX.1420 ZX.1421 CDR.7062 ZX.0334 CDR CDR ZX ZX H.p. hose R2 3/8" 10m, M24x1.5 F-F H.p. hose R2 5/16" 15m, M24x1.5 F-F H.p. hose R2 3/8" 20m, M24x1.5 F-F H.p. hose R2 5/16" 20m, M24x1.5 F-F Painted hose reel kit composed of: chromed support, painted automatic hose reel and connection hose (WITHOUT H.P. HOSE) Hose connection, M22x1.5 M-M Hose connection, M24x1.5 M-M Rotating nozzle 400bar, flow rate 045, G1/4" F Rotating nozzle 400bar, flow rate 13, G1/4" F Sandblasting head complete with 4m PVC hose and h.p. nozzle Sandblasting head complete with 4m PVC hose and h.p. nozzle Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice. Tubular frame set made of chromed steel Cover made of painted steel Industrial pump 1450g/min, with crankshaft, brass head, 3 ceramic plungers, by-pass valve, and glycerine-filled pressure gauge Electric motor Hzcomplete with electric box IP55 Control panel in 24V complete with: hour meter as standard, master safety switch and ON/OFF start switch and 5m electric cable Motor-pump drive by flexible coupling Dimensions WxLxH: 850 x 520 x 960mm Standard equipment H.p. hose 10m with screw quick couplings Industrial compensating spray gun Professional lance 900mm (900mm straight for 300/18) H.p. nozzle 25 high resolution 47

22 Libera MADE IN ITALY >1450 > Hz 60Hz Industrial h. p. washer Libera enables a vigorous and effective wash. Excellent for continuous heavy-duty use. Ideal for sandblasting. TUBULAR FRAME SET Sturdy with thick chrome-plating INDUSTRIAL PUMP Excellent performance and reliability SIMPLIFIED ELECTRIC PANEL With just one ON/OFF circuit breaker switch DIRECT MOTOR-PUMP DRIVE 48

23 Cold Water Technical data Libera 50Hz Code Model Version Mtr-pump Controls Pressure Fl. rate Power Wght drive ZX.2268 ZX.2269 ZX / / /18 By-pass By-pass By-pass Direct Direct Direct ON/OFF ON/OFF ON/OFF 250bar 170bar 300bar 15l/min 33l/min 18l/min hp (3x400V-50Hz) 15hp (3x400V-50Hz) 15hp (3x400V-50Hz) 120kg 130kg 130kg Libera 60Hz ZX ZX ZX /15 By-pass Direct ON/OFF 250bar 15l/min hp (3x400V-60Hz) 120kg /33 By-pass Direct ON/OFF 170bar 33l/min hp (3x400V-60Hz) 130kg /18 By-pass Direct ON/OFF 300bar 18l/min hp (3x400V-60Hz) 130kg Optional Code Description ZX.2268 ZX ZX.2269 ZX ZX.2270 ZX ZX.1418-S Filter kit 10" composed of: transparent 10" filter, cleanable cartridge 270mesh - 50mcrs, connection hose and filter tightening wrench ZX.1419-S ZN.EC100B2D2D ZN.DC100B1Z1Z ZN.EC200B2D2D ZN.DC200B1Z1Z ZX.1420-S ZX.1421-S CDR.7062 ZX.0334 CDR CDR ZX ZX ZX.RCC10F-C ZX.RBC10K-C ZX.NCC10J-C Double filter kit 10" composed of: transparent 10" double filter, wound thread cartridge 5 and 1mcr, connection hose H.p. hose R2 3/8", 10m, G3/8" F-F H.p. hose R2 5/16", 10m, G3/8" F-F H.p. hose R2 3/8", 20m, G3/8" F-F H.p. hose R2 5/16", 20m, G3/8" F-F Painted hose reel kit composed of: chromed support, painted automatic hose reel and connection hose (WITHOUT H.P. HOSE) Hose connection, M22x1.5 M-M Hose connection, M24x1.5 M-M Rotating nozzle 400bar, flow rate 045, G1/4" F Rotating nozzle 400bar, flow rate 13, G1/4" F Sandblasting head complete with 4m PVC hose and h.p. nozzle Sandblasting head complete with 4m PVC hose and h.p. nozzle Hose for sewer nozzles 10m, M22x1.5 M + pair of screw quick couplings Hose for sewer nozzles 10m, M22x1.5 M + pair of screw quick couplings Hose for sewer nozzles 10m, M24x1.5 M + pair of screw quick couplings Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice. Tubular frame set made of chromed steel Cover made of painted steel Industrial pump with crankshaft, brass head, 3 ceramic plungers, by-pass valve and glycerine-filled pressure gauge Electric motor Hz (1750 on 60Hz vers.) complete with electric box IP55 Simplified electric panel with ON/OFF circuit breaker switch Motor-pump direct drive Dimensions WxLxH: 850 x 520 x 960mm Standard equipment H.p. hose R2 15m, 400bar Industrial compensating spray gun Professional lance 900mm (900mm straight for 300/18) H.p. nozzle 25 high resolution 49

24 Transformer transformerrmer Patented solution MADE IN ITALY >1450 > Hz 60Hz Professional h. p. washer Transformer enables a perfect wash, easily, safely and effortlessly. Transformer has been entirely designed, engineered, patented and manufactured from A to Z by Idrobase Group. It is ideal for companies that use the h.p. washer up to 8 hours a day. VISIBLE PUMP Professional: 50% less maintenance time CONTROL PANEL Safe: IP56 certified Simple: only one circuit breaker switch, no electronics SIMPLE AND STURDY Attractive design, easy to use and sturdy structure "COMFORT LINE" ACCESSORIES When working helps well-being 50

25 Cold Water Technical data Code Model Version Pressure Fl. rate Power Wght Transformer 50Hz ZX.2657 ZX.2657-TS ZX.2661 ZX.2661-TS ZX.2663 ZX.2663-TS 150/15 By-pass 150bar 15l/min hp (3x400V-50Hz) 73kg 150/15 TS Total Stop 150bar 15l/min hp (3x400V-50Hz) 74kg 150/21 By-pass 150bar 21l/min hp (3x400V-50Hz) 87kg 150/21 TS Total Stop 150bar 21l/min hp (3x400V-50Hz) 88kg 200/15 By-pass 200bar 15l/min hp (3x400V-50Hz) 87kg 200/15 TS Total Stop 200bar 15l/min hp (3x400V-50Hz) 88kg Transformer 60Hz ZX ZX TS ZX ZX TS ZX ZX TS /15 By-pass 150bar 15l/min hp (3x400V-60Hz) 73kg /15 TS Total Stop 150bar 15l/min hp (3x400V-60Hz) 74kg /21 By-pass 150bar 21l/min hp (3x400V-50Hz) 87kg /21 TS Total Stop 150bar 21l/min hp (3x400V-50Hz) 88kg /15 By-pass 200bar 15l/min hp (3x400V-50Hz) 87kg /15 TS Total Stop 200bar 15l/min hp (3x400V-50Hz) 88kg See also the corresponding cold water pressure washer: Stella page 36 Optional Code Description ZX.2657 ZX.2657-TS ZX ZX TS ZX.2661 ZX.2661-TS ZX ZX TS ZX.2663 ZX ZX.2663-TS ZX TS CDR.1239 ZN.CC100B3P3P ZN.CC150B3P3P ZN.CC200B3P3P ZX.2151 CDR.7062 ZX.7117 ZX.0292 ZX.0293 ZX.1496 ZX ZX ZX ZX.KAC10G ZX.KAC10F ZX.KAC10H ZX.0520-M ZX.0519-M ZX.0521-M ZX.0996-P Inlet filter for dirty water G3/4" M-F complete with gasket 250mesh - 80microns H.p. hose R1 5/16", 315bar, 10m, M22x1.5 F-F H.p. hose R1 5/16", 315bar, 15m, M22x1.5 F-F H.p. hose R1 5/16", 315bar, 20m, M22x1.5 F-F Hose reel kit composed of: painted support, manual hose reel and connection hose (WITHOUT H.P. HOSE) Hose connection, M22x1.5 M-M CdR 80 lance, 1200mm with bend, inlet G1/4" M, outlet 1/4" NPT-F Set of quick nozzles, flow rate 050 with ball quick coupling G1/4" F Set of quick nozzles, flow rate 045 with ball quick coupling G1/4" F Set of quick nozzles, flow rate with ball quick coupling G1/4" F Rotating nozzle G1/4" M, flow rate 050 Rotating nozzle G1/4" M, flow rate 045 Rotating nozzle G1/4" M, flow rate 070 Hose for sewer nozzles 1/4" 210bar 10m, inlet M long, SS nozzle with 3 bottom holes, flow rate 045 Hose for sewer nozzles 1/4" 210bar 10m, inlet M long, SS nozzle with 3 bottom holes, flow rate 055 Hose for sewer nozzles 1/4" 210bar 10m, inlet M long, SS nozzle with 3 bottom holes, flow rate 065 Sandblasting head kit G1/4" M, flow rate 050 Sandblasting head kit G1/4" M, flow rate 045 Sandblasting head kit G1/4" M, flow rate 075 POM foam kit with 1L tank with extended length M quick coupling + pair of swivel ball quick couplings Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice. Standard equipment Frame set made of chromed steel and protected by transparent paint Thermoformed cover in polystyrene Professional pump 1450 (1750 on 60Hz vers.), crankshaft, brass head, 3 ceramic plungers Electric motor Hz (1750 on 60Hz version), complete with ON/OFF circuit breaker switch, and 5m electric cable Dimensions WxLxH: 815 x 590 x 1042mm H.p. hose R1 5/16" 10m, screw quick couplings M22x1.5 F-F Spray gun RED 50, inlet M22x1.5 M Lance 700mm H.p. nozzle 25 high resolution 51

26 Coccinella Plus MADE IN ITALY > Hz The specialised h.p. washer Coccinella enables a perfect wash, easily, safely and effortlessly. It is ideal for companies that use the h.p. washer for prolonged time and for heavy-duty jobs (4 hours a day). TUBULAR FRAME SET In chromed steel treated with polyester VISIBLE PUMP Professional: 50% less maintenance time "COMFORT LINE" ACCESSORIES When working helps well-being QUICK CONNECTION Between lance and nozzle: extremely professional 52

27 Cold Water Technical data Code Model Version Pressure Fl. rate Power Wght ZX.2094 ZX.2094-TS ZX.2197 ZX.2197-TS ZX.2095 ZX.2095-TS / /11 TS / /8 TS / /15 TS By-pass Total Stop By-pass Total Stop By-pass Total Stop 100bar 100bar 140bar 140bar 150bar 150bar 11l/min 11l/min 8l/min 8l/min 15l/min 15l/min hp (1x230V-50Hz) 3hp (1x230V-50Hz) 3hp (1x230V-50Hz) 3hp (1x230V-50Hz) 5.5hp (3x400V-50Hz) 5.5hp (3x400V-50Hz) 44kg 46kg 44kg 46kg 49kg 51kg See also the corresponding hot water pressure washer: Principessa Plus page 38 Optional Code Description ZX.2094 ZX.2094-TS ZX.2197 ZX.2197-TS ZX.2095 ZX.2095-TS CDR.7691 Water inlet filter G3/4" M-F complete with gasket 200mesh - 74microns ZN.CC100B8Z3P ZN.CC150B8Z3P ZN.CC200B8Z3P H. H.p. hose R1 5/16", 315bar, 10m, M22x1.5 F-F swivel H.p. hose R1 5/16", 315bar, 15m, M22x1.5 F-F swivel H.p. hose R1 5/16", 315bar, 20m, M22x1.5 F-F swivel ZX.2127 Hose reel kit composed of: chromed support, manual hose reel and connection hose CDR.7062 ZU.C9K ZU.C12K ZX.1676 ZX.0180 ZX.0181 ZX.1677 ZX.0167 ZX.0183 ZX.0982-P Hose connection, M22x1.5 M-M CdR 80 lance 900mm, inlet M swivel quick coupling, outlet F ball quick coupling CdR 80 lance 1200mm, inlet M swivel quick coupling, outlet F ball quick coupling Rotating nozzle 025, with male quick coupling Rotating nozzle 045, with male quick coupling Rotating nozzle 050, with male quick coupling Sandblasting kit flow rate 030, with male quick coupling Sandblasting kit flow rate 045, with male quick coupling Sandblasting kit flow rate 050, with male quick coupling POM foam kit with 1L tank with extended length M quick coupling Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice. Frame set made of chromed steel,treated with polyester Cover made of thermoformed polystyrene Professional pump 1450, crankshaft, brass head, 3 ceramic plungers. Complete with bolt unloader valve, detergent injector and glycerine-filled pressure gauge Electric motor Hz, complete with ON/OFF, circuit breaker switch and 5m electric cable Dimensions WxLxH: 440 x 667 x 950mm Standard equipment H.p. hose R1 5/16" 8m, pressure 315bar with screw quick coupling swivel Professional spray gun inlet M22x1.5M, female swivel ball outlet Professional lance 900mm with female ball quick coupling Low pressure detergent kit 5 quick nozzles (l.p. detergent, h.p ) 53

28 Coccinella MADE IN ITALY >28000 > Hz 60Hz Portable h. p. washer Coccinella enables a perfect wash, easily, safely and effortlessly. It is ideal for companies that use the h.p. washer for a medium amount of time (2 hours a day). TUBULAR FRAME SET Made of steel with thick chrome-plating VISIBLE PUMP Professional: 50% less maintenance time COVER LIKE A "LADYBIRD" CONTROL PANEL Safety: IP55 insulation Simplified: only one switch 54

29 Cold Water Technical data Code Model Version Pressure Fl. rate Power Wght Coccinella 60Hz Coccinella 50Hz ZX.2555 ZX.2555-TS ZX.2556 ZX.2556-TS ZX ZX TS ZX ZX TS /11 By-pass 110bar 11l/min hp (1x230V-50Hz) 46kg /11 TS Total Stop 110bar 11l/min hp (1x230V-50Hz) 47kg /13 By-pass 180bar 13l/min hp (3x400V-50Hz) 51kg /13 TS Total Stop 180bar 13l/min hp (3x400V-50Hz) 52kg /11 By-pass 110bar 11l/min hp (1x230V-60Hz) 46kg /11 TS Total Stop 110bar 11l/min hp (1x230V-60Hz) 47kg /13 By-pass 180bar 13l/min hp (3x400V-60Hz) 51kg /13 TS Total Stop 180bar 13l/min hp (3x400V-60Hz) 52kg Optional Code Description CDR.7691 ZN.CC100B3P3P ZN.CC150B3P3P ZN.CC200B3P3P ZX.2555 ZX.2555-TS ZX.2556 ZX.2556-TS ZX ZX TS Water inlet filter G3/4" F complete with gasket 200mesh - 74microns H.p. hose 5/16", 315bar, 10m, M22x1.5 F-F H.p. hose 5/16", 315bar, 15m, M22x1.5 F-F H.p. hose 5/16", 315bar, 20m, M22x1.5 F-F ZX ZX TS ZX.2127 Hose reel kit composed of: chromed support, manual hose reel and connection hose CDR.7062 ZX.7117 ZX.0621 ZX.0293 ZX ZX ZX.RMC10B-M ZX.RMC10A-M ZX.0518-M ZX.0519-M ZX.0996-P Hose connection, M22x1.5 M-M CdR 80 lance, 1200mm with bend, inlet G1/4" M, outlet 1/4" NPT-F Set of quick nozzles, flow rate 040 with ball quick coupling G1/4" F Set of quick nozzles, flow rate 045 with ball quick coupling G1/4" F Rotating nozzle G1/4" M, flow rate 040 Rotating nozzle G1/4" M, flow rate 045 Hose for sewer nozzles 10m, M22x1.5 M + pair of screw quick couplings Hose for sewer nozzles 10m, M22x1.5 M + pair of screw quick couplings Sandblasting head kit G1/4" M, flow rate 040 Sandblasting head kit G1/4" M, flow rate 045 POM foam kit with 1L tank with extended length M quick coupling + pair of swivel ball quick couplings + pair of swivel ball quick couplings Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice. Frame set made of chromed steel,treated treated with polyester Cover made of thermoformed polystyrene Professional pump with brass head, 3 plungers. Complete with bolt unloader valve, glycerine-filled pressure gauge Electric motor complete with ON/OFF circuit breaker switch and 5m electric cable Dimensions WxLxH: 440 x 667 x 950mm Standard equipment H.p. hose R1 5/16", 315bar, 10m, M22x1.5 F-F swivel Professional spray gun inlet M22x1.5M Professional lance 900mm H.p. nozzle 25 high resolution 55

30 Violetta MADE IN ITALY > Hz The H.P. washer for small business Violetta enables a perfect wash, easily, safely and effortlessly. It is ideal for companies that use the h.p. washer for a medium amount of time (2 hours a day). TUBULAR FRAME SET Made of steel with thick chrome-plating VISIBLE PUMP 50% less maintenance time THERMOFORMED COVER IN POLYSTYRENE CONTROL PANEL Safety: IP55 insulation Simplified: only one switch 56

31 Cold Water Technical data Code Model Version Pressure Fl. rate Power Wght ZX.2780 ZX.2780-TS ZX.2782 ZX.2782-TS /9 By-pass 130bar 9l/min hp (1x230V-50Hz) 46kg /9 TS Total Stop 130bar 9l/min hp (1x230V-50Hz) 47kg /11 By-pass 170bar 11l/min hp (3x400V-50Hz) 51kg /11 TS Total Stop 170bar 11l/min hp (3x400V-50Hz) 52kg See also the corresponding hot water pressure washer: Principessa page 40 Optional Code Description ZX.2780 ZX.2780-TS ZX.2782 ZX.2782-TS CDR.7691 ZN.AC100B2P2P ZN.AC200B2P2P Inlet filter for dirty water G3/4" M-F complete with gasket H.p. hose R1 1/4" 10m, M22x1.5 F-F H.p. hose R1 1/4 20m, M22x1.5 F-F ZX.2127 Hose reel kit composed of: chromed support, manual hose reel and connection hose CDR.7062 ZX.7117 Hose connection, M22x1.5 M-M CdR 80 lance, 1200mm with bend, inlet G1/4" M, outlet 1/4" NPT-F ZX.1492 Set of quick nozzles, flow rate 035 with ball quick coupling G1/4" F ZX.0621 Set of quick nozzles, flow rate 040 with ball quick coupling G1/4" F ZX Rotating nozzle G1/4" M, flow rate 035 ZX Rotating nozzle G1/4" M, flow rate 040 ZX.0996-P POM foam kit with 1L tank with extended length M quick coupling + pair of swivel ball quick couplings Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice. Frame set made of chromed steel Cover made of thermoformed polystyrene Axial pump 2800, brass head, 3 steel/ceramic plungers. Complete with bolt unloader valve, glycerine-filled pressure gauge Electric motor Hz complete with electric box IP55 with ON/OFF, circuit breaker switch and 5m electric cable Dimensions WxLxH: 440 x 667 x 950mm Standard equipment H.p. hose 8m with screw quick coupling M22x1.5 F-F Professional spray gun inlet M22x1.5M Professional lance 900mm, inlet G1/4"M, outlet 1/4"NPT-F H.p. nozzle 25 high resolution 57

32 Idro P. MADE IN ITALY > Hz Autonomous u high pressure washer Idro P. enables a vigorous and effective wash, even without power sources. It is designed for continuous use. PETROL ENGINE Extremely reliable. Fuel: green petrol AUTOMATIC RPM REGULATOR Standard COMFORT LINE SWIVEL ACCESSORIES When working helps well-being 5 QUICK COUPLING NOZZLES FOR ANY TYPE OF WASHING Excellent washing quality, 25% time savings 58

33 Cold Water Technical data Code Model Version Pressure Fl. rate Power Wght ZX.2282 IDRO P. By-pass 190bar 15l/min hp 52kg Optional Code Description CDR.1239 Inlet filter for dirty water G3/4" M-F complete with gasket 250mesh - 80microns ZN.CC100B3P3P H.p. hose R1 5/16" 10m, M22x1.5 F-F ZN.CC150B3P3P H.p. hose R1 5/16" 15m, M22x1.5 F-F ZN.CC200B3P3P H.p. hose R1 5/16" 20m, M22x1.5 F-F CDR.7062 Hose connection, M22x1.5 M-M ZU.C9K CdR 80 lance 900mm, inlet male swivel ball, outlet female ball ZU.C12K CdR 80 lance 1200mm, inlet male swivel ball, outlet female ball ZX.0629 Rotating nozzle 040, with M ball quick coupling ZX.1494 Sandblasting kit 1.4 with M ball quick coupling ZX.0982-P POM foam kit with 1L tank with extended length M quick coupling Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice. Tubular frame set made of chromed steel treated with polyester Professional pump 3400, crankshaft, brass head, 3 ceramic plungers. Complete with bolt unloader valve, low pressure detergent injector and glycerine-filled pressure gauge Petrol engine Robin-Subaru hp, with pull start and automatic rpm regulator. Displacement 265cc, 6,1L tank capacity Dimensions WxLxH: 700 x 550 x 950mm Standard d equipment H.p. hose R1 5/16" 8m, with swivel screw quick coupling Professional spray gun with female swivel ball quick coupling Lance 900mm with male quick coupling 4 quick H.p. nozzles ( ) high resolution 1 l.p. quick nozzle for detergent 59

34

35 idrobase Innovative pressure washers 61

36 Semi-professional h.p.. washers Cold water MADE IN ITALY Code Model Pressure Fl. rate Power Wght > Hz ATTIVA PLUS 145bar 8l/min 2800 Electric motor 2800, 230V-50Hz with thermal protection valve and Easy Start device Total Stop device Pump head made of brass 3 plungers made of hardened steel Dimensions WxLxH: 320 x 380 x 810mm 2,4kW (1x230-50Hz) Standard equipment: H.p. hose 8m Spray gun w/extension Lance with variable angle nozzle Detergent foam lance Quick coupling for water suction 22kg Code Model Pressure Fl. rate Power Wght > Hz GRANDE PLUS 155bar 9l/min 2800 Electric motor 2800, 230V-50Hz with thermal protection valve and Easy Start device Total Stop device Pump head made of brass 3 plungers made of hardened d steel Dimensions WxLxH: 300 x 380 x 810mm 2,7kW (1x230-50Hz) Standard equipment: H.p.. hose 10m Manual al hose reel Spray gun w/extension Extension lance with variable angle nozzle + Hi-Lo function Lance with rotating nozzle 1,8L detergent tank Quick coupling for water suction 30kg Hot water Code Model Pressure Fl. rate Power Wght > Hz SAETTA 150bar 9l/min 2800 Electric motor 2800, 230V-50Hz with thermal protection valve and Easy Start device Total Stop device Axial pump with brass head and 3 ceramic plungers and current protection Safety valve and burner with delayed ed ignition ion L.p. detergent dispenser Integrated detergent and fuel tank Dimensions WxLxH: 520 x 900 x 810mm 2,7kW (1x230-50Hz) Standard equipment: H.p. hose 8m Spray gun w/extension Extension lance with variable angle nozzle + Hi-Lo function H.p. nozzle 77kg 62

37 Hobby h.p. washers Cold water > Hz MADE IN ITALY Code Model Pressure Fl. rate Power Wght GAIA 120* 120bar 6l/min 2800 GAIA 140* 140bar 7l/min 2800 Electric motor 2800, 230V-50Hz with thermal protection valve and Easy Start devicee Total Stop device Pump head made of aluminium 3 plungers made of hardened steel Dimensions WxLxH: 310 x 310 x 820mm 1.6kW (1x230V-50Hz) 2.0kW (1x230-50Hz) 16kg 17kg Standard equipment: H.p. hose 6m (*), 8m (**) Spray gun w/extension Extension lance with quick coupling Variable angle nozzle Rotating nozzle (**) Detergent foam lance > Hz Code Model Pressuree Fl. rate Power Wght DINAMICA bar 5,7l/min ,8kW (1x230V-50Hz) DINAMICA 110: Motor 2800, 230V-50Hz with thermal protection valve and 5m electric cable Axial pump p with 3 plungers in hardened steel Total Stop device e Soft, comfortable grip Wheels with brake Dimensions WxLxH: Standard equipment: H.p. hose 5m Spray gun w/extension Lance with variable able angle nozzle Foam lance 18kg Code Model Pressure Fl. rate Power Wght > Hz P ENERGICA 150 PLUS 110bar 5,7l/min ,8kW (1x230V-50Hz) ENERGICA 150 PLUS: Motor 2800, 230V-50Hz with thermal protection valve and 5m electric cable Axial pump with brass head and 3 steel/ceramic plungers Total Stop device Accessory-holder frame Comfortable grip Manual hose reelel Dimensions WxLxH: Standard equipment: H.p. hose 5m Spray gun w/extension Lance with variable angle nozzle Foam lance 18kg 63

38 64

39 idrobase Innovative pressure washers 65

40 Country MADE IN ITALY > Hz Pressure washers for livestock farms Country enables a vigorous and effective pressure washing of stalls, agricultural machinery and equipment. Excellent for heavy-duty continuous use. Also ideal for sandblasting. CONE JET Ideal for "sweeping" mediumlarge size surfaces PIN JET The maximum impact per unit of surface, excellent for removing dirt residues and stubborn soiling from agricultural and earth-moving machinery CANNON LANCE WITH ADJUSTABLE JET 66

41 Technical data Agricultural, Cold Water Code Model Version Mtr-pump drive Controls Pressure Fl. rate Power Wght ZX.2284 ZX /15 By-pass Direct ON/OFF 250bar 15l/min hp (3x400V-50Hz) 120kg /33 By-pass Direct ON/OFF 170bar 33l/min hp (3x400V-50Hz) 130kg Optional Code Description ZX.2284 ZX.2285 ZX.1418-S ZN.BC100B2D2D ZN.DC100B1Z1Z ZN.BC200B2D2D ZN.DC200B1Z1Z ZX.1420-S ZX.1421-S Filter kit 10" complete with: transparent 10" filter, cleanable mesh cartridge 50mcrs and connection hose. Recommended for dirty water H.p. hose R2 3/8", 10m, G3/8" F-F H.p. hose R2 5/16", 10m, G3/8" F-F H.p. hose R2 3/8", 20m, G3/8" F-F H.p. hose R2 5/16", 20m, G3/8" F-F Painted hose reel kit composed of: chromed support, painted automatic hose reel and connection hose (WITHOUT H.P. HOSE) VN.N138 Connection G3/8" M-M for h.p. hoses ZX.7128 ZX.7116 ZC.045-E9L ZC.13-E9L ZT.045-E9L ZT.13-E9L C.MEG2504 C.MEG2512 CdR 80 lance, 900mm straight, inlet G1/4", outlet 1/4" NPT-F CdR 80 lance, 900mm with bend inlet G1/4", outlet 1/4" NPT-F CdR 80 lance, 900mm, with rotating nozzle flow rate pair of swivel quick couplings CdR 80 lance, 900mm, with rotating nozzle flow rate 13 + pair of swivel quick couplings CdR 80 lance, 900mm, with sandblasting nozzle flow rate pair of swivel quick couplings CdR 80 lance, 900mm, m, with sandblasting nozzle flow rate 13 + pair of swivel quick couplings H.p. nozzle 25 angle, flow rate 040, 1/4" NPT-M H.p. nozzle 25 angle, flow rate 12, 1/4" NPT-M Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice. Tubular frame set made of chromed steel Cover made of painted steel Industrial pump with crankshaft, brass head, 3 ceramic plungers, complete with by-pass valve and glycerine-filled pressure gauge Electric motor Hzcomplete with electric box IP55 Simplified electric panel with ON/OFF circuit breaker switch Motor-pump direct drive Dimensions WxLxH: 850 x 520 x 960mm Standard equipment H.p. hose 10m, 400bar Spray gun RED 50, inlet M22x1.5 M Cannon lance 520mm Brass nozzle with ceramic insert 67

42 Traktor Patented solution MADE IN ITALY > Hz Professional h.p. washer for farms Traktor enables a perfect wash of agricultural machinery, simply, safely and effortlessly. Traktor has been entirely designed, engineered, patented and manufactured from A to Z by Idrobase Group. CONE JET Ideal for "sweeping" mediumlarge size surfaces PIN JET The maximum impact per unit of surface, excellent for removing dirt residues and stubborn soiling from agricultural and earth-moving machinery CANNON LANCE WITH ADJUSTABLE JET 68

43 Agricultural, Cold Water Technical data Code Model Version Pressure Fl. rate Power Wght ZX.2357 ZX.2357-TS ZX.2361 ZX.2361-TS ZX.2363 ZX.2363-TS 150/15 By-pass 150bar 15l/min hp (3x400V-50Hz) 73kg 150/15 TS Total Stop 150bar 15l/min hp (3x400V-50Hz) 74kg 150/21 By-pass 150bar 21l/min hp (3x400V-50Hz) 87kg 150/21 TS Total Stop 150bar 21l/min hp (3x400V-50Hz) 88kg 200/15 By-pass 200bar 15l/min hp (3x400V-50Hz) 87kg 200/15 TS Total Stop 200bar 15l/min hp (3x400V-50Hz) 88kg Optional Code Description ZX.2357 ZX.2357-TS ZX.2361 ZX.2361-TS ZX.2363 ZX.2363-TS CDR.1239 ZN.CC100B3P3P ZN.CC150B3P3P ZN.CC200B3P3P ZX.2151 CDR.7062 Water inlet filter G3/4" M-F complete with gasket 250mesh - 80microns. Recommended for dirty water H.p. hose R1 5/16", 315bar, 10m, M22x1.5 F-F H.p. hose R1 5/16", 315bar, 15m, M22x1.5 F-F H.p. hose R1 5/16", 315bar, 20m, M22x1.5 F-F Hose reel kit composed of: painted support, manual hose reel and connection hose (WITHOUT H.P. HOSE) Hose connection, M22x1.5 M-M ZY.050-C9J ZY.045-C9J ZY.070-C9J ZX.KAC10G-K ZX.KAC10F-K ZX.KAC10V-K CdR 80 lance, 900mm, with rotating nozzle flow rate pair of swivel quick couplings CdR 80 lance, 900mm, with rotating nozzle flow rate pair of swivel quick couplings CdR 80 lance, 900mm, with rotating nozzle flow rate pair of swivel quick couplings Hose for sewer nozzles 1/4" 210bar 10m, inlet M long, SS nozzle with 3 bottom holes, flow rate 055 Hose for sewer nozzles 1/4" 210bar 10m, inlet M long SS nozzle with 3 bottom holes, flow rate pair of swivel ball quick couplings Hose for sewer nozzles 1/4" 210bar 10m, inlet M long, SS nozzle with 3 bottom holes, flow rate 070 ZX.0996-P POM foam kit with 1L tank with extended length M quick coupling + pair of swivel ball quick couplings Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice. Frame set made of chromed steel and protected by transparent paint Thermoformed cover in polystyrene Professional pump 1450, crankshaft, brass head, 3 ceramic plungers. Complete with bolt unloader valve and glycerine-filled pressure gauge Electric motor Hz, complete with ON/OFF, circuit breaker switch and 5m electric cable Dimensions WxLxH: 815 x 590 x 1042mm Standard equipment H.p. hose R1 5/16" 10m, screw quick couplings M22x1.5 F-F Spray gun RED 50, inlet M22x1.5 M Cannon lance 520mm with variable jet Brass nozzle with ceramic insert 69

44

45 idrobase Innovative pressure washers 71

46 Multiplo MADE IN ITALY > Hz Inlet water up to maximum 85 C The modular system for car washes Thanks to Multiplo lo you can have a custom tailored professional pressure washing system. A module completed with different variants, to achieve professional and specific pressure washing. Ideal for professional washing systems: Multiplo is available in a number of models that can be supplied with water up to 85 C. SYSTEM WITH AISI 304 STAINLESS STEEL COVER and galvanised frame INDUSTRIAL PUMP With patented seal system between head and guard that guarantees an high performance rm and reliability CONTROL PANEL Complete with 24V controls, hour meter and master safety switch USE WITH INLET WATER UP TO MAX 85 C 72

47 Hot Water Technical data Code Model Version Pressure Fl. rate Power Wght ZX.1740-HW ZX.1741-HW ZX.1742-HW /26 TS Total Stop 180bar 26l/min hp (3x400V-50Hz) 80.5kg /33 TS Total Stop 140bar 33l/min hp (3x400V-50Hz) 98.5kg /42 TS Total Stop 110bar 42l/min hp (3x400V-50Hz) 98.5kg Use with inlet water up to max 85 C. Optional Code Description ZX.1740-HW ZX.1741-HW ZX.1742-HW ZX.0302-R Inlet water filter kit 10" complete with: 4 pressure gauges, wall bracket, pressure reducer, 2000mm connection hose and 2 filter cartridges (1-3mcrs and 5mcrs), shut-off valve and filter tightening wrench ZX.0303-R Inlet water filter kit 20" complete with: 4 pressure gauges, wall bracket, pressure reducer, 2000mm connection hose and 2 filter cartridges (1-3mcrs and 5mcrs), shut-off valve and filter tightening wrench ZX.1678 Hose R1 1/2" 210bar M22x1.5 F-G1/2" F for connecting the system to the line ZX.1679 Accumulator kit 0.35L, M22x1.5 M-F to reduce water hammering Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer without prior notice. Frame set made of galvanised steel with cover in AISI 304 stainless steel H.p. pump with camshaft, 3 ceramic plungers, bronze alloy connecting ne ng rods and dual gasket pack in special mix Electric motor 1450, 3x400V-50Hz Brass by-pass valve Glycerine-filled pressure gauge made of AISI 304 stainless steel Brass water inlet filter "Y" shaped Control panel in 24V complete with: hour meter as standard, master safety switch and ON/OFF start switch and 5m electric cable Dimensions WxLxH: 45 x 78 x 50mm 73

48 Singolo MADE IN ITALY > Hz Technical dataa The perfect solution for car washes Singolo enables you to optimise the washing system. It offers the possibility to have a perfect wash, simply, quickly and economically. Singolo is the answer for companies who want higher quality in the pressure washing process, with reduced costs and time taken. It is the ideal solution for the car wash. Code Model Version Pressure Fl. rate Power Wght ZX.2314 ZX.2314-TS ZX.2315 ZX.2315-TS FREDDO /15 FREDDO /15 TS FREDDO /21 FREDDO /21 TS By-pass Total Stop By-pass Total Stop 150bar 150bar 150bar 150bar 15l/min 15l/min 21l/min 21l/min hp (3x400V-50Hz) 5.5hp (3x400V-50Hz) 7.5hp (3x400V-50Hz) 7.5hp (3x400V-50Hz) 54kg 57kg 67.5kg 70kg Data, tables and pictures are purely indicative. Any changes can be made by the manufacturer ac without prior notice. Optional Code Description ZX.1665 Filter kit 10" complete with: transparent 10" filter, cleanable cartridge 270mesh - 50mcrs, connection hose and filter tightening wrench Cover AISI 304 stainless steel Professional pump 1450, crankshaft, brass head, 3 ceramic plungers Pressure accumulator to attenuate water hammering Brass water inlet filter "Y"" shaped Electric motor, 50Hz, complete with ON/OFF circuit breaker switch Electric panel, equipped with ON/OFF switch and hour meter. 3m electric cable for connection to the module and 5m for connection to the electric power supply Dimensions WxLxH: 530 x 450 x 350mm Standard equipment H.p. hose 10m with swivel screw quick coupling Professional spray gun with female swivel ball quick coupling Lance 900mm with male quick coupling H.p. nozzle 25 angle, high resolution 74

49 Cold Water RR.TN9214SR38R.TN9214SR38 Ogive start fitting made of galvanised steel, G3/8" M-ø14mm TRI.0009 H.p. hose in AISI 304 stainless steel ø14x2mm, in 3m sections ZX.0514-C3 Stainless steel anti-vibration bracket for pipe ø14, complete with stainless steel screws S.LI0110SA Pressure accumulator 0.1L, 210bar, inlet G3/8" F RR.TN10014S Ogive "T" fitting made of galvanised steel, ø14mm TRI.0009 H.p. hose in AISI 304 stainless steel ø14x2mm, in 3m sections GRP.0027 Electric panel cover made of AISI 304 stainless steel ZN.CC007X1Z8P H.p. connection hose, between module and line, R1 5/16", 700mm G3/8" F-F 90 RR.TN9214SR38 Ogive start fitting made of galvanised a steel G3/8" M-ø14mm EFF.2321N203 H.p. ball valve made of brass, *viton O-Ring, G3/8" F-F, 210bar CDR.7012 Female ball l quick coupling made of AISI 416 stainless steel, G3/8" F, 250bar ZX.1413 Spray gun RED 50, inlet M22x1.5 M, female swivel ball outlet ZX.0514-C3 Stainless steel anti-vibration bracket for pipe ø14, complete with AISI 304 stainless steel screws CDR.7011 Male ball quick coupling, made of AISI 416 stainless steel, G3/8" F, 250bar CDR.7017 Nipple G3/8" M M22x1.5 M ZN.CC100B8Z3P H.p. hose R1 5/16", 10m, 315bar, M22x1.5 F-F swivel ZN.CC200B8Z3P H.p. hose R1 5/16", 20m, 315bar, M22x1.5 F-F swivel CDR.1296 Wall support po for hose, made of AISI 304 stainless steel ZX.1162 CdR 80 lance 500mm, inlet extended quick male, outlet 1/4" NPT-F CDR.1321 AISI 304 stainless steel wall support for lances: foam lance + 2 lances with various attachments ZX.1164 CdR 80 lance, 900mm, inlet male extended, outlet t 1/4" NPT-F Installation example high pressure line complete e with: fittings, anti-vibration brackets, h.p. ball valves and AISI 304 stainless steel pipe ø14mm *VITON is a registered trademark of Dupont 75

50 Motor-pump unit Cold Water Motor-pump o unit MADE IN ITALY > Hz Motor-pump unit Professional motor-pump unit pre-assembled and tested. Device easy to position that enables an effective and safe wash up to 4 hours a day. Code Model Version Pressure Fl. rate Power Wght ZX.1040 ZX.1040-TS ZX.1042 ZX.1042-TS ZX.1043 ZX.1043-TS /11 F By-pass 110bar 11l/min hp (1x230V-50Hz) 33.7kg /11 F TS Total Stop 110bar 11l/min hp (1x230V-50Hz) 34.5kg /15 F By-pass 150bar 15l/min hp (3x400V-50Hz) 36.8kg /15 F TS Total Stop 150bar 15l/min hp (3x400V-50Hz) 37.5kg /15 F By-pass 200bar 15l/min hp (3x400V-50Hz) 46.3kg /15 F TS Total Stop 200bar 15l/min hp (3x400V-50Hz) 47kg Motor base made of chromed steel with anti-vibration feet Professional pump 1450, crankshaft, brass head, 3 ceramic plungers. Complete with bolt unloader valve and glycerine-filled pressure gauge Electric motor Hz, IP55 electric box with ON/OFF circuit breaker e switch Electric c cable 5m Standard equipment H.p. hose 8m, fittings G3/8" F-F Professional spray gun, inlet G3/8"M Professional lance 900mm H.p. nozzle 25 high resolution 76