Fieldbus System (Gateway Decentralized Type)

Size: px

Start display at page:

Download "Fieldbus System (Gateway Decentralized Type)"

Aubrey Davis
5 years ago
Views:

1 Fieldbus System (Gateway Decentralized Type) * * Except the SY, VQC and S0700 valves GW Unit which supports PROFINET added. New M connector type Input Unit added. Decentralized valve installation Valves can be installed near the actuators! Reduced piping space and piping materials Reduced wiring space No need to set the address for the valve manifold and Input Unit. GW Unit (Gateway Unit) Description Gateway Decentralized System Page 8 Gateway Decentralized System Page 6 Compatible protocol Number of inputs/outputs 8 inputs/ 8 outputs 6 inputs/ 6 outputs Number of valve manifold and Input Unit connections Max. 6 Units Max. 8 Units ranch cable length Max. 0 m New function Web server function Valve operation test Connection diagnostic Short-circuit diagnostic Page Max. 0 m Input Unit (M connector type) Input Unit (M8 connector type) Valve manifold Series EX500 CT.E0-6

Series EX500 Fieldbus System Gateway Decentralized System (8 Points) P Number of branch ports: Number of inputs/outputs P Number of inputs/outputs per branch: Max.

Units * Number of Input Unit connections P Number of Input Unit connections per branch: Max. Units Max. 8 Units Total cable length per branch Max.

number of inputs: 3 Max. number of outputs: 3 Max. number of inputs: 3 Max.

2 Series EX500 Fieldbus System Gateway Decentralized System (8 Points) P Number of branch ports: Number of inputs/outputs P Number of inputs/outputs per branch: Max. 3 inputs/3 outputs 8 inputs/8 outputs Number of valve manifold connections Max. 8 Units * P Number of valve manifold connections per branch: Max. Units * Number of Input Unit connections P Number of Input Unit connections per branch: Max. Units Max. 8 Units Total cable length per branch Max. 0 m * When the number of outputs is set to "6 outputs" using a built-in setting switch of the SI Unit. Maximum number of inputs: 8 points Maximum number of outputs: 8 points <Wiring example> Max. number of inputs: 3 Max. number of outputs: 3 Max. number of inputs: 3 Max. number of outputs: 3 Max. number of inputs: 3 Max. number of outputs: 3 Max. number of inputs: 3 Max. number of outputs: 3 Input Unit Valve manifold Valve manifold Input Unit PLC Valve manifold Input Unit Valve manifold Communication cable (Industrial network) Input Unit Valve manifold Power supply GW Unit Input Unit Input Unit Valve manifold ranch cable (Subnetwork) Setting switch ranch port Two valve manifolds can be connected to one branch port. SI Unit has a built-in setting switch which switches the number of outputs (3 points / 6 points) of the valve manifold connected to the SI Unit. y setting the number of outputs to 6 points, two valve manifolds can be installed to one branch port. SI Unit

3 Web server function Valve operation test (ON/OFF), connection diagnostic between valve manifold and Input Unit, and short-circuit diagnostic of input device can be performed on a Web browser. password can be used for the valve operation test (ON/OFF) for security. The location of the error can be identified. Details of the error can be identified on a Web browser. Red LED ON Green LED flashing These ports are in error. * WE display example PC RJ-5 connector COM D COM C COM COM Open circuit 6 Inputs 3 Outputs 6 Inputs uto switch Short circuit 6 Outputs 6 Inputs 6 Outputs 6 Inputs No need to set the address I/O mapping for the SI Unit and Input Unit is set by the Gateway Unit automatically. The Unit installation order is not specified. (The upper limit of the inputs / outputs is 3 points for one branch port.)

Series EX500 Fieldbus System Gateway Decentralized System (8 Points) Reduced wiring The amount

Reduction of number of communication nodes y reducing the number of communication nodes, the

Previously, it was necessary to change the part number of the slave unit, return the slave

period control). d Only the GW Unit needs to be changed. ccessories can be ordered together.

Time for selecting parts, ordering and managing lead time can be reduced.

y using output block, lights and buzzers can be operated.

uzzer Specified valve manifold can be controlled by supplying power from a different system.

4 Series EX500 Fieldbus System Gateway Decentralized System (8 Points) Reduced wiring The amount of communication and power supply wiring for the I/O device can be reduced. Reduction of number of communication nodes y reducing the number of communication nodes, the load on the network is reduced. Flexibly copes with changes in the protocol. Previously, it was necessary to change the part number of the slave unit, return the slave unit, and make arrangements once again to obtain a new unit (additional quotation, delivery period control). d Only the GW Unit needs to be changed. ccessories can be ordered together. ccessories including cables and connectors can be ordered together to SMC. Time for selecting parts, ordering and managing lead time can be reduced. Page Page 5 pplicable to output devices other than valve manifold. y using output block, lights and buzzers can be operated. Page Output block Output device Solenoid valve Power supply Others Indicator light, Relay, uzzer Specified valve manifold can be controlled by supplying power from a different system. Page 3 y using a Y branch connector, power from a different system can be supplied to the SI Unit (valve manifold). <Example of use> Work pieces machined by robots Power supply Valve manifold for holding a workpiece when robots are operating Operator places work pieces. (Parts supply) Rotational workbench Power is off when parts are being positioned. Y branch connector Valve manifold for holding a workpiece when supplying parts Power supply 3

5 System Comparison Table Gateway Decentralized System Gateway Decentralized System (Current model) Protocol Number of inputs/outputs (Number of inputs/outputs per branch) Number of valve manifold connections (Number of connections per branch) Number of Input Unit connections (Number of connections per branch) 8 inputs/8 outputs (3 inputs/3 outputs) Max. 8 Units * (Max. Units) Max. 8 Units (Max. Units) 6 inputs/6 outputs (6 inputs/6 outputs) Max. Units ( Unit) Max. Units ( Unit) ranch cable length Max. 0 m Max. 0 m Enclosure Function GW Unit: IP65 SI Unit: IP67 Input Unit: IP67 Web server function (Valve operation test, Connection diagnostic, Short-circuit diagnostic) GW Unit: IP65 SI Unit: IP67 Input Unit: IP65 Page 8 6 * When the number of outputs is set to "6 outputs" using a built-in setting switch of the SI Unit. pplicable Valve Series Series Flow rate characteristics (/R5/3) C [dm 3 /(s bar)] SY SY SY b Maximum number of solenoids 3 Power consumption [W] 0.35 (Standard) 0. (With power saving circuit) [Inrush 0., Holding 0.] Enclosure International standard Page IP67 7 VQC000.0 Note) 0.30 Note) VQC Note) 0.30 Note) 0. (Standard) VQC Note) 0.38 Note) 0.95 (Standard) VQC Note) 0.3 Note) 0. (Low-wattage type) IP67 5 S IP0 37 SV SV IP67 0 SV Note) Values for -position single, rubber seal type

Series SY3000/5000/7000 Piping on the top or the bottom makes the footprint smaller to

stations connectable L Piping is possible from 3 directions.

different-sized valves on the same manifold.

6 Series SY3000/5000/7000 Piping on the top or the bottom makes the footprint smaller to realize dramatic space-saving. Valve piping direction variations Max. stations connectable L Piping is possible from 3 directions. L I t is possible to connect only the number of valves required, from to stations, to suit the application. (Maximum number of solenoids: 3) Top ported Side ported Side ported Mixed mounting of top ported and side ported is possible. ottom ported Mixed valve sizes manifold It is also possible to install a combination of different-sized valves on the same manifold. (SY3000 and SY5000, or SY5000 and SY7000) This facilitates reduction in the installation space and number of units/cables. L Example: For SY5000 and SY3000 Overall length of manifold Single manifold Single manifold Mixed manifold SY stations SY stations SY stations SY stations + Installation space 35. mm 36.7 mm Number of Fieldbus Units/ Unit cost sets Manifold Fieldbus Unit 5 pprox. 3% reduction 86.9 mm 50% reduction set pcs. sets Manifold Fieldbus Unit pc. set

CONTENTS Fieldbus System (Gateway Decentralized Type) Series EX500 L Features (Gateway Decentralized System ) Page L System Comparison Table/pplicable Valve Series Page L Introduction of

How to Order Page 0 Specifications Page 0 Dimensions/Parts Description Page 0 L Input Unit How to Order Page Specifications Page Dimensions/Parts Description Page L ccessories Power

Page Power lock Page Connector for Output lock Wiring Power Supply Cable for Power lock Page 5 End Plate racket Plate Page 6 L SY3000/5000/7000 How to Order: Type 0/Type Page 7 Type Page

L VQC000 How to Order Page 5 Dimensions Page 7 L VQC000 How to Order Page 8 Dimensions Page 30 L VQC000 How to Order Page 3 Dimensions Page 33 L VQC5000 How to Order Page 3 Dimensions

7 CONTENTS Fieldbus System (Gateway Decentralized Type) Series EX500 L Features (Gateway Decentralized System ) Page L System Comparison Table/pplicable Valve Series Page L Introduction of the SY Series Valve Page 5 Series EX500 Gateway Decentralized System (8 Points) Page 8 L GW Unit How to Order Page 9 Specifications Page 9 Dimensions/Parts Description Page 9- L SI Unit How to Order Page 0 Specifications Page 0 Dimensions/Parts Description Page 0 L Input Unit How to Order Page Specifications Page Dimensions/Parts Description Page L ccessories Power Supply Cable Communication Cable/Connector Page ranch Cable Y ranch Connector Cable for Power Supply from a Different System Page 3 Marker Seal Cap DIN Rail racket Page 3- Output lock Page Power lock Page Connector for Output lock Wiring Power Supply Cable for Power lock Page 5 End Plate racket Plate Page 6 L SY3000/5000/7000 How to Order: Type 0/Type Page 7 Type Page 0 Dimensions: Type 0 SY3000 Page SY5000 Page 3 SY7000 Page For dimensions of Type and Type, refer to the SY series catalog (CT. ES-03). L VQC000 How to Order Page 5 Dimensions Page 7 L VQC000 How to Order Page 8 Dimensions Page 30 L VQC000 How to Order Page 3 Dimensions Page 33 L VQC5000 How to Order Page 3 Dimensions Page 36 L S0700 How to Order Page 37 Dimensions Page 39 L SV000/000/3000 How to Order Page 0 Dimensions: Tie-rod ase SV000 Page SV000 Page 3 SV3000 Page L Precautions on Mixed Usage of Gateway Decentralized System and Gateway Decentralized System Page 5 6

8 CONTENTS Series EX500 Gateway Decentralized System (6 Points) Page 6 L GW Unit How to Order Page 7 Specifications Page 7 Dimensions/Parts Description Page 7 L SI Unit (for SV) How to Order Page 8 Specifications Page 8 Dimensions/Parts Description Page 8 L SI Unit (for SY/VQC/S0700) How to Order Page 9 Specifications Page 9 Dimensions/Parts Description Page 9 L Input Manifold How to Order Page 50 Specifications Page 5 Dimensions/Parts Description Page 5 How to dd Input lock Stations Page 53 L ccessories Power Supply Cable ranch Cable Page 5 Communication Cable Page 55 Terminal Plug Seal Cap Page 56 L SY3000/5000/7000 How to Order: Type 0/Type Page 57 Type Page 60 Dimensions: Type 0 SY3000 Page 6 SY5000 Page 63 SY7000 Page 6 For dimensions of Type and Type, refer to the SY series catalog (CT. ES-03). 7 D D D D D D PWR COM L VQC000 How to Order Page 65 Dimensions Page 67 L VQC000 How to Order Page 68 Dimensions Page 70 L VQC000 How to Order Page 7 Dimensions Page 73 L VQC5000 How to Order Page 7 Dimensions Page 76 L S0700 How to Order Page 77 Dimensions Page 79 L SV000/000/3000/000 How to Order Page 80 Dimensions: Cassette ase SV000 Page 8 SV000 Page 83 Tie-rod ase SV000 Page 8 SV000 Page 85 SV3000 Page 86 SV000 Page 87

Series EX500 Gateway Decentralized System (8

manifold and Input Unit can be connected around

) Number of inputs/outputs = 8 points/8 points.

8 Units, Number of Input Unit connections = Max.

0 m ) Web server function (Valve operation test,

diagnostic of input devices) ) No need to set the

9 Series EX500 Gateway Decentralized System (8 Points) Gateway Decentralized System ) Valve manifold and Input Unit can be connected around the GW (Gateway) Unit. ) Number of inputs/outputs = 8 points/8 points. The number of outputs (solenoids) per branch is 3 points. ) Number of valve manifold connections = Max. 8 Units, Number of Input Unit connections = Max. 8 Units, ranch cable length = Max. 0 m ) Web server function (Valve operation test, connection diagnostic of Units, short-circuit diagnostic of input devices) ) No need to set the address for the valve manifold and Input Unit. SY VQC S0700 SV SY3000/5000/7000 Page 7 VQC000/000/000/5000 Page 5 S0700 Page 37 SV000/000/3000 Page 0 8

10 Series EX500 Gateway Decentralized System (8 Points) GW Unit How to Order EX500 G EN RoHS EN PN Communication protocol EtherNet/IP (Input/Output = 8 points/8 points) PROFINET (Input/Output = 8 points/8 points) Specifications Communication Model EX500-GEN EX500-GPN Protocol EtherNet/IP TM Note ) PROFINET IO Version Note ) Volume (Edition 3.) Volume (Edition.5) PROFINET Specification Version. Media 00SE-TX 00SE-TX Communication speed 0/00 Mbps (utomatic) 00 Mbps Communication method Full duplex/half duplex (utomatic) Full duplex Number of inputs/ outputs (I/O occupation area) 8 inputs/8 outputs (0 bytes/0 bytes) 8 inputs/8 outputs (8 bytes/6 bytes) Configuration file Note 3) EDS file GSDML IP address setting range Switch settings: to 5 or to 5, Through DHCP server: Optional address Optional address Device information Vendor ID: 7 (SMC Corporation) Product type: (Communication dapter), Product code: 98 Power supply voltage Current consumption ranch port Environment Standards Weight Enclosed parts pplicable function DLR QuickConnect TM Web server MRP Fast Start Up Web server For input and control VDC ±0% For valve VDC +0%, 5% For input and control 6. or less (Max..5 per branch x branches + GW Unit internal current consumption: 0. or less) For output (valve) or less (Max. per branch x branches) Number of branch ports ports Number of inputs and outputs 3 inputs/3 outputs per branch ranch cable length 0 m or less per branch Enclosure IP65 Operating temperature range Operating humidity range Note ) Use a CT5 or higher communication cable. Note ) Please note that the version is subject to change. Note 3) Each file can be downloaded from SMC website, Operating: 0 to 50 C, Stored: 0 to 60 C (No condensation) Operating, Stored: 35 to 85%RH (No condensation) CE marking, UL (CS), RoHS compliant 550 g Seal cap (for M connector socket) 5 pcs. 9

11 GTEWY UNIT Gateway Decentralized System (8 Points) GW Unit Series EX500 Dimensions/Parts Description EX500-GEN (EtherNet/IP TM ) Power supply connector 7/8 inch, pins, plug Communication connector (Port ) M, 5 pins, D-coded, socket Communication connector (Port ) M, 5 pins, D-coded, socket Indicator LED 3 x 3 Cover screw x M3 Cover (Setting switch) Mounting hole x M5 Ground terminal (FE) M ranch port M, 8 pins, -coded, socket Gateway Decentralized System EX500-GPN (PROFINET) Power supply connector 7/8 inch, 5 pins, plug Communication connector (Port ) M, 5 pins, D-coded, socket Indicator LED Cover screw x M Cover (Setting switch) Mounting hole x M5 Ground terminal (FE) M3 SY VQC S0700 SV Communication connector (Port ) M, 5 pins, D-coded, socket x 3 ranch port M, 8 pins, -coded, socket

12 Series EX500 Gateway Decentralized System (8 Points) SI Unit Output Unit for valve manifold connection How to Order EX500 S03 RoHS Specifications Model pplicable valve Number of outputs Output type Output Rated voltage Supply current Internal current consumption Enclosure Environment Operating temperature range Operating humidity range Standards Weight Enclosed parts EX500-S03 SY, VQC, S0700, SV 6/3 outputs (Switched by built-in setting switch) Source/PNP (Negative common) VDC With power supplied to GW Unit: Max..0 With external power* supplied: Max m or less IP67 Operating: 0 to 50 C, Stored: 0 to 60 C (No condensation) Operating, Stored: 35 to 85%RH (No condensation) CE, UL (CS), RoHS compliant 00 g Seal cap (for M connector socket) pc. Valve manifold mounting screw (M3 x 30) pcs. * When an accessory, Y branch connector, is used. Dimensions/Parts Description Indicator LED ranch connector (IN) M, 8 pins, -coded, plug ranch connector (OUT) M, 8 pins, -coded, socket Cover screw M Cover (Setting switch) Ground terminal (FE) M3 0

Series EX500 Gateway Decentralized System (8 Points) Input Unit Specifications RoHS Model EX500-DXP EX500-DXP Connector type M8 connector M connector Number of inputs 6 inputs Input type PNP Rated

13 Series EX500 Gateway Decentralized System (8 Points) Input Unit Specifications RoHS Model EX500-DXP EX500-DXP Connector type M8 connector M connector Number of inputs 6 inputs Input type PNP Rated voltage VDC Max..3 /Unit Input Supply current Total of 8 connectors of even number must be Max. 0.65, [ 8 connectors of odd number must be Max ] Input ON voltage/input ON current V or more/typ. 7 m (at VDC) Input OFF voltage/input OFF current 5 V or less/.5 m or less Internal current consumption 00 m or less (when the input signal is ON) Enclosure IP67 Environment Operating temperature range Operating: 0 to 50 C, Stored: 0 to 60 C (No condensation) Operating humidity range Operating, Stored: 35 to 85%RH (No condensation) Standards CE, UL (CS), RoHS compliant Weight 50 g 50 g Enclosed parts Seal cap (for M8 connector socket) 6 pcs. Seal cap (for M connector socket) pc. Seal cap (for M connector) 7 pcs. EX500-DXP.9 Ground terminal (FE) Dimensions/Parts Description EX500-DXP How to Order EX500 DX P Input unit Connector type M8 connector type M connector type Gateway Decentralized System SY VQC S0700 SV ranch connector (IN) M, 8 pins, -coded, plug Ground terminal (FE) Indicator LED ranch connector (OUT) M, 8 pins, -coded, socket Indicator LED ranch connector (IN) M, 8 pins, -coded, plug 9 38 ranch connector (OUT) M, 8 pins, -coded, socket Connector M8, 3 pins, socket x 0 Indicator LED x M (7.5) (6) Connector M, 5 pins, socket

14 Series EX500 Gateway Decentralized System (8 Points) ccessories q Power Supply Cable Supplies power to the GW Unit. For EtherNet/IP TM 9.9 L 36 Connects Fieldbus to the GW Unit. PC 6000 PC 6566 Connector specification, Cable length (L) 5999 Straight m 5996 Straight 6 m 6000 ngle m 5997 ngle 6 m w Communication Cable/Connector Cable with connector ø Cable length [mm] Socket pin arrangement 0. Socket pin arrangement For PROFINET Socket pin arrangement 3 7/8 inch Connections ø L 7/8 inch ø L 36 5 Socket pin arrangement Red: VDC (for solenoid valve) Green: VDC (for control and input) White: 0 V (for control and input) lack: 0 V (for solenoid valve) PC Connector specification, Cable length (L) Straight m Straight 6 m ngle m ngle 6 m 3 5 ø ø7/8" 6.5 ø7/8" ø6 3 ø L Connections ø.58 Red/White: 0 V (for solenoid valve) Red: 0 V (for control and input) Green: FE Red/Orange: VDC (for solenoid valve) Red/lack: VDC (for solenoid valve) M SPEEDCON M D-coded 3 Plug pin arrangement D-coded 3 Plug pin arrangement D-coded 3 Plug pin arrangement ø6.7 (ø6.5) Field wireable connector PC 6553 ø9 3 M EX9 C 00 EN Cable length (L) [mm] [mm] [mm] [mm] [mm] 6 Width across flats L 5 3 Connections Connections PSRJ White/Orange Orange 3 White/Green 5 6 Green 7 8 Shield Yellow: TD + White: RD + Orange: TD lue: RD ø7.5 Width across flats 3 pplicable Cable Cable O.D..0 to 8.0 mm Wire gauge (Stranded wire cross section) 0. to 0.3 mm /WG6 to Note) The table above shows the specifications for the applicable cable. daptation for the connector may vary on account of the conductor construction of the electric wire. Cable with M RJ-5 connector Connector specification M plug (Straight) PSRJ RJ-5 connector RJ-5 Plug pin arrangement

15 Gateway Decentralized System (8 Points) ccessories Series EX500 <Example of use> r Y branch connector eranch cable ø.9 tcable for power supply from a different system e ranch Cable Connects the GW Unit and SI Unit or Input Unit. EX500 C 030 SSPS Cable length (L) [mm] [mm] [mm] [mm] [mm] [mm] M -coded Socket 0.7 L ø6 Connector specification SSPS SP Socket side: Straight, Plug side: Straight Socket side: ngle, Plug side: ngle.7 M ø.9 -coded Plug r Y ranch Connector Supplies separate power to valve manifold when it is connected to the SI Unit. EX500 CY0 S ø.8 -coded 3 Plug pin arrangement EX500 M M P 050 Cable length (L) [mm] [mm] M ø. ø6 ø.8 M 6 39 Pin Layout of the Cable for Power Supply from a Different System VDC +0%, 5% (for solenoid valve) 0 VDC (for solenoid valve) 3 Unused Unused t Cable for Power Supply from a Different System Connect to Y branch connector to supply power. S Connector specification S Straight ngle Gateway Decentralized System SY VQC S0700 SV M M ø L ø6 3.3 M -coded L -coded 8.3 ø6 Socket Plug 5.3 L PC 080 Cable length (L) [mm] [mm] [mm] ø.8.5 L 50 -coded Socket pin arrangement M SPEEDCON Connections ø5 rown: VDC (+0%, 5%, Solenoid valve power supply) White: 0 V (Solenoid valve power supply) lue: Not connected lack: Not connected Gray Note ), Green/Yellow Note ): Not connected Note ) For EX500-P - Note ) For PC- 3

written on the marker and installed to the Input Unit.

y using these waterproof caps, the new connector maintains

EX9-WES EX9-WTS For M8 connector socket For M connector

16 Series EX500 y Marker ( sheet, 88 pcs.) Signal name of the input device such as a switch can be written on the marker and installed to the Input Unit. EX600-ZT u Seal Cap (0 pcs.) Use with new connector. y using these waterproof caps, the new connector maintains IP65/67 enclosure. EX9-WES EX9-WTS For M8 connector socket For M connector socket i DIN Rail racket ( pcs.) racket for mounting the Input Unit (EX500-DXP, EX500-DXP) to DIN rail. EX500 ZM <Example of use> 3-

Gateway Decentralized System (8 Points) ccessories Series EX500 o Output block!

Power supply type T Internal power supply method (for low-wattage load) P Integrated power supply method (for high-wattage load) Note) Note) Required to connect with a power block.

P Possible to mount the output block and power block additionally between the SI Unit and the valve (The surplus I/O points are used).

17 Gateway Decentralized System (8 Points) ccessories Series EX500 o Output block!0 Power block EX9 Power supply o Output lock OE T Dimensions/Parts Description Output device Solenoid valve Others Indicator light, Relay, uzzer Output specification Source/PNP (Negative common) Power supply type T Internal power supply method (for low-wattage load) P Integrated power supply method (for high-wattage load) Note) Note) Required to connect with a power block. Position indicator LED P Output devices other than valve manifold can be operated. P y using the power block and output block for high watt load, operation up to 0.5 / point can be performed. P Possible to mount the output block and power block additionally between the SI Unit and the valve (The surplus I/O points are used). P point outputs per output block (M connector) You are requested to connect it to an SI Unit and a valve manifold. For detailed specifications, refer to the Operation Manual that can be downloaded from SMC website, Power lock EX9 PE Dimensions/Parts Description Position indicator LED Gateway Decentralized System SY VQC S0700 SV Connector for output device connection (M, 5 pins, socket, -coded) PWR Power supply connector (unused) Power supply input connector (M, 5 pins, plug, -coded) Specifications Model EX9-OET EX9-OEP Internal current consumption 0 m or less Output type Number of outputs Power supply Output method Output device supply voltage Output device supply current Enclosure Environment Operating humidity range Standards Weight Source/PNP (Negative common) Internal power supply method outputs Integrated power supply method (Power block: supplied from EX9-PE) VDC Max. m/point (.0 W/point) Max. 0.5 /point ( W/point) IP67 Operating temperature range 0 to 50 C 35 to 85%RH (No condensation) CE marking, UL (CS), RoHS compliant 0 g Specifications Model Connection block EX9-PE Output block for high wattage load Connection block stations Output block: Max. 8 stations Power supply for output Power supply voltage.8 to 6. VDC and internal control Internal current consumption 0 m or less Supply current Max. 3. Note) Enclosure IP67 Environment Operating temperature range 0 to 50 C Operating humidity range 35 to 85%RH (No condensation) Standards CE marking, UL (CS), RoHS Weight 0 g Enclosed parts Seal cap (for M connector) pc. Note) When using with 3.0 to 3., the ambient temperature should not exceed 0 C, and do not bundle the cable.

18 Series EX500! Connector for Output lock Wiring Field wireable connects the output device to the output block. PC ø.8 M SPEEDCON pplicable Cable Cable O.D (55) Width across flats to 6.0 mm Wire gauge (Stranded wire cross section) 0. to 0.3 mm /WG6 to Core wire diameter (Including insulating material) 0.7 to.3 mm ø6.3 -coded 3 Plug pin arrangement 3 Connections rown: Not connected White: Output lue: 0 V lack: Output 0 PC SW5 ø.8 M SPEEDCON pplicable Cable Cable O.D (55) Width across flats 5.0 to 8.0 mm Wire gauge (Stranded wire cross section) 0.3 to 0.75 mm /WG to 8 Core wire diameter (Including insulating material).3 to.5 mm ø8. -coded 3 Plug pin arrangement 3 Connections rown: Not connected White: Output lue: 0 V lack: Output 0! Power Supply Cable for Power lock Supplies power to the power block. EX9 C L Cable length (L) [mm] [mm] [mm] M ø PC 0807 ø.8.5 L 50 Cable length (L) [mm] [mm] [mm] M SPEEDCON ø5 -coded 5 3 rown: VDC +0%, 5% (Power supply for output) White: 0 V (Power supply for output) 3 Socket pin arrangement 5 Connections Gray Note ), Green/Yellow Note ): Ground Note ) For EX9-C - Note ) For PC- 5

5 60 E03 66 x M Mounting hole 0 3. <Example of use> Gateway Decentralized System!

To prevent connection failure between products due to deflection, use this bracket plate whenever output block

19 Gateway Decentralized System (8 Points) ccessories Series EX500!3 End Plate Use when the output block is not used and the valve manifold is not connected. EX E03 66 x M Mounting hole 0 3. <Example of use> Gateway Decentralized System! racket Plate reinforcing brace used to mount output block or power block onto the SI Unit. To prevent connection failure between products due to deflection, use this bracket plate whenever output block or power block is mounted. EX9 Dimensions P x (R) x x x (R) <Example of use> SY VQC S0700 SV 7.5 ccessory Description Quantity Hexagon socket head cap screw (M3 x 35) 6

20 Type 0 Side Ported Type ottom Ported Gateway Decentralized System 5 Port Solenoid Valve Series SY3000/5000/7000 RoHS For detailed specifications, Common Precautions and Specific Product Precautions, refer to the WE catalog or the SY series catalog (CT. ES-03). How to Order Manifold SS5Y 3 0 S 3N 05 U C6 q w e r t y u i q Series 3 SY SY SY7000 * For mixed mounting, refer to the WE catalog or the SY series catalog (CT. ES-03). w Type 0 Side ported ottom ported Note) Note) The SY5000 manifold base is used for the bottom ported of the SY3000. When ordering, refer to the WE catalog or the SY series catalog (CT. ES-03). * When mixing top ported configurations, select from page. In this case, use caution as there is also output on the and port on base side. Specify on a manifold specification sheet if plugs are required on the and port on base side. How to Order Manifold ssembly e SI Unit (Number of outputs, Output polarity, Max. number of valve stations) 0 Without SI Unit 3 outputs 3N Note, ), to 6 stations ( stations Note 3) ), Negative common Note ) Note ) 6 outputs can be set by switching the built-in setting switch. Note ) Ensure a match with the common specification of the valve. Note 3) ( ): Maximum number of stations for mixed single and double wiring. Note ) When using the SI Unit with 3 outputs, use the GW Unit compatible with the EX500 Gateway Decentralized System (8 points). r Valve stations Stations Note 0 stations Double wiring Note ) 6 6 stations 0 stations Mixed wiring, Specified layout Note ) (vailable up to 3 solenoids) stations Note ) Double wiring: -position single, double, 3-position and -position valves can be used on all manifold stations. Use of a -position single solenoid will result in an unused control signal. If this is not desired, order with a specified layout. Note ) Specified layout: Indicate the wiring specifications on the manifold specification sheet. (Note that -position double, 3-position and -position valves cannot be used where single wiring has been specified.) Note 3) For the product without the SI Unit (S0), note the maximum number of solenoids of the SI Unit that will be mounted. If the layout is specified, indicate it on the manifold specification sheet. * This also includes the number of blanking plate assembly. Example Manifold base -position double t P, E port entry U U side ( to 0 stations) D D side ( to 0 stations) oth sides ( to stations) D side 3 Stations U side y SUP/EXH block assembly Internal pilot S Internal pilot, uilt-in silencer Note ) ) R External pilot Note ) 3/5(E) port is plugged for the built-in silencer type. Note ) When built-in silencer type is used, keep the exhaust port from coming in direct contact with water or other liquids. 7 SS5Y3-0S3N-05D-C6 set (Manifold base part number) * SY300-5U 5 sets (-position double part number) The asterisk denotes the symbol for assembly. Prefix it to the part numbers of the valve etc. The valve arrangement is numbered as the st station from the D side. Under the manifold base part number, state the valves to be mounted in order from the st station as shown in the figure above. If the arrangement becomes complicated, specify on the manifold specification sheet.

21 Gateway Decentralized System 5 Port Solenoid Valve Series SY3000/5000/7000 u, port size (Metric/), port Type 0/Side Ported Type /ottom Ported SY3000 SY5000 SY7000 SY5000 SY7000 C ø V C3 ø3. V C ø V V V C6 ø6 V V V V V C8 ø8 V V V V C0 ø0 V V C ø V V CM Note ) Mixed sizes V V V V V L ø V V L6 ø6 V V V L8 ø8 V V L0 ø0 V L ø V ø V V 6 ø6 V V V 8 ø8 V V 0 ø0 V ø V Straight Elbow Note ) Downward Upward LM Note ) Mixed sizes V V V, port size (Inch/), port Type 0/Side Ported Type /ottom Ported SY3000 SY5000 SY7000 SY5000 SY7000 N ø/8" V N3 ø5/3" V V V N7 ø/" V V V V V N9 ø5/6" V V V V N ø3/8" V V CM Note ) Mixed sizes V V V V V LN3 ø5/3" V LN7 ø/" V V LN9 ø5/6" V LN ø3/8" V N3 ø5/3" V N7 ø/" V V N9 ø5/6" V N ø3/8" V Straight Elbow Note ) Downward Upward LM Note ) Mixed sizes V V V P, E port Note 3) ø5/6" ø3/8" ø/" ø3/8" ø/" Gateway Decentralized System SY VQC S0700 SV P, E port Note 3) ø8 ø0 ø ø0 ø Note ) Indicate the sizes on the manifold specification sheet. Note ) To avoid interference with the body or piping, select downward elbow port when mounting the optional spacer assembly. For details, refer to the WE catalog or the SY series catalog (CT. ES-03). Note 3) The direction of P, E port fittings is the same as for, port. If selecting LM, indicate it on the manifold specification sheet for the P, E port fitting direction. i Mounting and Option Option Mounting Name plate Station number Direct V V mounting V Dl Note ) DIN rail l Note ) V V mounting l Note ) V Note ) Refer to DIN Rail Option below. * Select the direct mounting type for Type (ottom ported). DIN Rail Option With DIN bracket, DIN rail with standard length 0 With DIN bracket, without DIN rail 3 Note) With DIN bracket, DIN rail for 3 stations Note) With DIN bracket, DIN rail for stations Note) Specify a longer rail than the length of valve stations. * If the DIN rail must be mounted without an SI Unit, select D0 and order the DIN rail separately. Refer to L3 of the dimensions for the DIN rail length. For the DIN rail part number, refer to the WE catalog or the SY series catalog (CT. ES-03). * For the fixation of DIN rail mounting type manifold, refer to the WE catalog or the SY series catalog (CT. ES-03). Protective class class # (Mark: ) 8

22 Series SY3000/5000/7000 How to Order Valves (With mounting screw) SY q w e r t y u i o!0! Side/ottom ported q Series 3 SY SY SY7000 w Type of actuation Single -position Double 3 Closed center 3-position Exhaust center 5 Pressure center Note) N.C./N.C. -position dual Note) N.O./N.O. 3-port valve C Note) N.C./N.O. Note) Select the rubber seal type for the -position dual 3-port valve. e Seal type 0 Rubber seal Metal seal r Pilot type R t ack pressure check valve None uilt-in H Note) Internal pilot External pilot Note) Select the rubber seal type when the back pressure check valve is built-in. Manifold installed type is available if the back pressure check valve is required for a valve with metal seal. For ordering example, refer to the WE catalog or the SY series catalog (CT. ES-03). However, it is not recommended to use the built-in valve type and the manifold installed type at the same time because it will reduce the flow. * Select for 3-position type and the SY7000. y Pilot valve option Standard (0.7 MPa) Quick response type (0.7 MPa) K Note) High pressure type (.0 MPa) Note) Select the metal seal type for high pressure type. u Coil type Standard With power saving circuit T (Continuous duty type) Note ) ) Note ) e sure to select the power saving circuit type when the valve is continuously energized for long periods of time. Note ) e careful of the energizing time when the power saving circuit is selected. For details, refer to the WE catalog or the SY series catalog (CT. ES-03). i Rated voltage 5 VDC o Light/surge voltage suppressor and common specification With light Surge voltage suppressor Common specification R Non-polar U V V NS Negative NZ V common * Select NZ type for with the power saving circuit.!0 Manual override D Non-locking push E Push-turn locking (manual) Push-turn locking (slotted) F Slide locking (manual)! Type of mounting screw Round head combination screw Hexagon socket head cap screw Round head combination screw K (Falling-out-prevention type) Note) H Hexagon socket head cap screw (Falling-out-prevention type) Note) Note) For K and H, the valve body cover has a drop prevention construction to stop the mounting screws from falling out when the valve is removed for maintenance etc. * When ordering a valve individually, the base gasket is not included. Since the base gasket is attached to the manifold, please order the base gasket separately if it is needed for maintenance service. For details, refer to the WE catalog or the SY series catalog (CT. ES-03). * Select or K for the optional individual SUP/EXH spacer assembly, interface regulator or double check spacer assembly with residual pressure release valve. 9 Protective class class # (Mark: )

23 Type Top Ported SS5Y How to Order Manifold 3 S 3N 05 U q Note ) Double wiring: -position single, double, 3-position and -position valves can be used on all manifold stations. Use of a -position single solenoid will result in an unused control signal. If this is not desired, order with a specified layout. Note ) Specified layout: Indicate the wiring specifications on the manifold specification sheet. (Note that -position double, 3-position and -position valves cannot be used where single wiring has been specified.) Note 3) For the product without the SI Unit (S0), note the maximum number of solenoids of the SI Unit that will be mounted. If the layout is specified, indicate it on the manifold specification sheet. * This also includes the number of blanking plate assembly. e r t y u q Series e Valve stations r P, E port entry 3 SY SY SY7000 * For mixed mounting, refer to the WE catalog or the SY series catalog (CT. ES-03). How to Order Manifold ssembly Example 5 Port Solenoid Valve Series SY3000/5000/7000 -position double RoHS For detailed specifications, Common Precautions and Specific Product Precautions, refer to the WE catalog or the SY series catalog (CT. ES-03). w SI Unit (Number of outputs, Output polarity, Max. number of valve stations) 0 Without SI Unit 3 outputs 3N Note, ), to 6 stations ( stations Note 3) ), Negative common Note ) Note ) 6 outputs can be set by switching the built-in setting switch. Note ) Ensure a match with the common specification of the valve. Note 3) ( ): Maximum number of stations for mixed single and double wiring. Note ) When using the SI Unit with 3 outputs, use the GW Unit compatible with the EX500 Gateway Decentralized System (8 points). Gateway Decentralized System Stations 0 stations 6 6 stations 0 stations stations w Note Double wiring Note ) Specified layout Note ) (vailable up to 3 solenoids) U Note) U side ( to 0 stations) D Note) D side ( to 0 stations) oth sides ( to stations) Note) For type S, supply/exhaust block assembly with built-in silencer, choose U or D for P, E port entry. t SUP/EXH block assembly Internal pilot S Note ) Internal pilot, uilt-in silencer Note ) R External pilot Note ) For type S, supply/exhaust block assembly with built-in silencer, choose U or D for P, E port entry. 3/5(E) port is plugged. The silencer exhaust port is located on the opposite side of P, E port entry. (Example: When the P, E port entry is D side, the silencer exhaust port is U side.) Note ) When the built-in silencer type is used, keep the exhaust port from coming in direct contact with water or other liquids. y P, E port size (s) SY3000 SY5000 SY7000 ø8 ø0 ø N Note) ø5/6" ø3/8" ø/" Note) For N, sizes are in inches. Gateway Decentralized System SY VQC S0700 SV Manifold base D side Stations U side 3 SS5Y3-S3N-05D set (Manifold base part number) * SY330-5U-C6 5 sets (-position double part number) The asterisk denotes the symbol for assembly. Prefix it to the part numbers of the valve etc. The valve arrangement is numbered as the st station from the D side. Under the manifold base part number, state the valves to be mounted in order from the st station as shown in the figure above. If the arrangement becomes complicated, specify on the manifold specification sheet. u Mounting Direct mounting D With DIN bracket, DIN rail with standard length D0 With DIN bracket, without DIN rail With DIN bracket, DIN rail for 3 stations D3 Note) D Note) With DIN bracket, DIN rail for stations Note) Specify a longer rail than the length of valve stations. * If the DIN rail must be mounted without an SI Unit, select D0. Then, refer to L3 of the dimensions for the DIN rail length and order separately. For the DIN rail part number, refer to the WE catalog or the SY series catalog (CT. ES-03). * For the fixation of DIN rail mounting type manifold, refer to the WE catalog or the SY series catalog (CT. ES-03). 0

24 Series SY3000/5000/7000 How to Order Valves (With mounting screw) SY C6 q w e r t y u i o!0!!!3 Top ported q Series 3 SY SY SY7000 w Type of actuation Single -position Double 3 Closed center 3-position Exhaust center 5 Pressure center Note) N.C./N.C. -position dual Note) N.O./N.O. 3-port valve C Note) N.C./N.O. Note) Select the rubber seal type for the -position dual 3-port valve. e Seal type 0 Rubber seal Metal seal r Pilot type R Internal pilot External pilot t ack pressure check valve (uilt-in valve type) None H Note) uilt-in Note) Select the rubber seal type when the back pressure check valve is built-in. Manifold installed type is available if the back pressure check valve is required for a valve with metal seal. For ordering example, refer to the SY series catalog (CT. ES-03). However, it is not recommended to use the built-in valve type and the manifold installed type at the same time because it will reduce the flow. * Select for 3-position type and the SY7000. y Pilot valve option Standard (0.7 MPa) Quick response type (0.7 MPa) K Note) High pressure type (.0 MPa) Note) Select the metal seal type for high pressure type. u Coil type Standard With power saving circuit T (Continuous duty type) Note ) ) Note ) e sure to select the power saving circuit type when the valve is continuously energized for long periods of time. Note ) e careful of the energizing time when the power saving circuit is selected. For details, refer to the SY series catalog (CT. ES-03). i Rated voltage 5 VDC o Light/surge voltage suppressor and common specification With light Surge voltage suppressor Common specification R Non-polar U V V NS Negative NZ V common * Select NZ type for with the power saving circuit.!0 Manual override D Non-locking push E Push-turn locking (manual) Push-turn locking (slotted) F Slide locking (manual)!, port size Thread piping Port size SY3000 SY5000 SY7000 M5 M5 x 0.8 V 0 /8 V 0 / V (Metric), port SY3000 SY5000 SY7000 C ø V C3 ø3. V C ø V V C6 ø6 V V V C8 ø8 V V C0 ø0 V C ø V (Inch), port SY3000 SY5000 SY7000 N ø/8" V N3 ø5/3" V V N7 ø/" V V V N9 ø5/6" V V N ø3/8" V!, port thread type Rc F G N NPT T NPTF * Select for M5.!3 Type of mounting screw Round head combination screw Hexagon socket head cap screw Round head combination screw K (Falling-out-prevention type Note) ) H Hexagon socket head cap screw (Falling-out-prevention type Note) ) Note) For K and H, the valve body cover has a drop prevention construction to stop the mounting screws from falling out when the valve is removed for maintenance etc. * When ordering a valve individually, the base gasket is not included. Since the base gasket is attached to the manifold, please order the base gasket separately if it is needed for maintenance service. For details, refer to the SY series catalog (CT. ES-03). * Select or K for the optional individual SUP/EXH spacer assembly or interface regulator. Protective class class # (Mark: )

25 Gateway Decentralized System 5 Port Solenoid Valve Series SY3000 Dimensions Type 0/Side Ported Series SY D side 80.. SI Unit (5.3) [(P), 3/5(E) port] pplicable tube O.D.: ø8, ø5/6" Light/surge voltage suppressor (L5) L M (.9) C6: 3.6 ( N7: 7. ) (Station ) (Station n) (8) Manual override () port side: lue (for rubber seal) : Gray (for metal seal) () port side: Yellow (5.5).6 (35) (0.9) x M Mounting hole L.5 (Fitting for the type with P/E ports on the U and/or D sides) (L) (DIN rail mounting hole pitch:.5) (L3) OUT IN P 3/5 E 3/5 P E U side.7.6 [(), () port] pplicable tube O.D.: ø : ø3., ø/8" : ø, ø5/3" : ø6, ø/" (.8) Gateway Decentralized System SY VQC S0700 SV M (Pitch) P = 0.5 (7.8) (7.5) Note) These figures show the SS5Y3-0S3N-05D-C6. L: Dimensions L n L L L L L n: Stations L n L L L L L For dimensions of Type /ottom ported type and Type /Top ported type, refer to the WE catalog or the SY series catalog (CT. ES- 03).

26 Series SY5000 Dimensions Type 0/Side Ported Series SY5000 D side (L5) Light/surge voltage suppressor L U side Manual override () port side: lue (for rubber seal) : Gray (for metal seal) () port side: Yellow (8) (5.5) 0. 0 SI Unit (5.3) (8.3) (5.9) 3. L (L) (DIN rail mounting hole pitch:.5) (L3) 5.5 (35).7 (6.7) x M5 Mounting hole (Fitting for the type with P/E ports on the U and/or D sides) [(P), 3/5(E) port] pplicable tube O.D.: ø0, ø3/8" M (Station ) (Station n) [(), () port] pplicable tube O.D.: ø, ø5/3" : ø6, ø/" : ø8, ø5/6" OUT IN P 3/5 E P 3/5 E (.8). 8.7 M (Pitch) P = 6 (0.5) (7.5) Note) These figures show the SS5Y5-0S3N-05D-C8. L: Dimensions n: Stations L n L L L L L L n L L L L L For dimensions of Type /ottom ported type and Type /Top ported type, refer to the WE catalog or the SY series catalog (CT. ES- 03).

27 Gateway Decentralized System 5 Port Solenoid Valve Series SY7000 Dimensions Type 0/Side Ported Series SY7000 D side U side 5 0. (L5) Light/surge voltage suppressor L (8) Manual override () port side: lue (for rubber seal) : Gray (for metal seal) () port side: Yellow (5.5) 5.5 (35) (77.) Gateway Decentralized System SI Unit (5.3) M 3. [(P), 3/5(E) port] pplicable tube O.D.: ø, ø/" (9.3) (N3: 0.) (6) (7.9) (Station ) L (L) (DIN rail mounting hole pitch:.5) (L3) (, port: ø) (Station n) x M5 Mounting hole (Fitting for the type with P/E ports on the U and/or D sides) [(), () port] pplicable tube O.D.: ø6, ø/" : ø8, ø5/6" : ø0, ø3/8" : ø SY VQC S0700 SV OUT IN P S P 3/5 E 3/5 E (.3). 8.7 M (Pitch) P = 9.7 (0) Note) These figures show the SS5Y7-0S3N-05D-C0. L: Dimensions L n L L L L L n: Stations L n L L L L L For dimensions of Type /ottom ported type and Type /Top ported type, refer to the WE catalog or the SY series catalog (CT. ES- 03).

28 Gateway Decentralized System 5 Port Solenoid Valve Series VQC000 For detailed specifications, Common Precautions and Specific Product Precautions, refer to the WE catalog or the VQC000/000 series catalog (CT. ES-0). How to Order Manifold VV5QC C6 SD3 N q w e r t q Valve stations Stations Note 0 station Double wiring stations 0 station Mixed wiring, Specified layout Note) stations (vailable up to solenoids) Note) Specified layout: Indicate the wiring specifications on the manifold specification sheet. (Note that -position double, 3-position and -position valves cannot be used where single wiring has been specified.) In addition, select the option K. e SI Unit (Number of outputs, Max. number of valve stations) SD0 Without SI Unit SD3 3 outputs Note, 3), to stations ( stations Note ) ) Note ) Due to the internal wiring of the valve, the maximum number of outputs is points. 6 outputs can be set by switching the built-in setting switch. Note ) ( ): Maximum number of stations for mixed single and double wiring. Note 3) When using the SI Unit with 3 outputs, use the GW Unit compatible with the EX500 Gateway Decentralized System (8 points). w, port size Metric size C3 Straight piping: ø3. C Straight piping: ø C6 Straight piping: ø6 M5 Straight piping: M5 thread CM Note ) Straight piping: Mixed sizes and with port plug L3 Top ported elbow: ø3. L Top ported elbow: ø L6 Top ported elbow: ø6 L5 Top ported elbow: M5 thread 3 ottom ported elbow: ø3. ottom ported elbow: ø 6 ottom ported elbow: ø6 5 ottom ported elbow: M5 thread LM Note ) Elbow piping: Mixed sizes and with port plug MM Note ) Mixed size for different types of piping, option installed Inch size N Straight piping: ø/8" N3 Straight piping: ø5/3" N7 Straight piping: ø/" NM Note) Straight piping: Mixed sizes and with port plug LN Top ported elbow: ø/8" LN3 Top ported elbow: ø5/3" LN7 Top ported elbow: ø/" N ottom ported elbow: ø/8" N3 ottom ported elbow: ø5/3" N7 ottom ported elbow: ø/" LNM Note) Elbow piping: Mixed sizes and with port plug NM Note ) Mixed size for different types of piping, option installed Note ) Indicate the sizes on the manifold specification sheet. Note ) When a combination of straight and elbow piping is or when option such as dual flow fitting assembly is mounted, please mention the mounting conditions in the Manifold Specification. 5 r SI Unit (Output polarity) (Without SI Unit) N Negative common * Ensure a match with the common specification of the valve to be used. t Option None Note ) With back pressure check valve (ll stations) D With DIN bracket, DIN rail with standard length D0 With DIN bracket, without DIN rail Dl Note ) With DIN bracket, DIN rail for l stations K Note 3) Special wiring specification (Except double wiring) N With name plate R Note ) External pilot S Note 5) uilt-in silencer, Direct exhaust * When multiple symbols are specified, indicate them alphabetically. Example) -RS Note ) When a back pressure check valve is used only for specified station, specify the back pressure check valve part number, and specify the station number to which the valve is mounted, on the manifold specification sheet. Note ) l: Specify a longer rail than the length of valve stations. Example) -D08 In this case, the valves will be mounted on the DIN rail for 8 stations, regardless of the number of manifold stations. Note 3) When single wiring and double wiring are mixed, specify wiring type of each station on the manifold specification sheet. Note ) For external pilot option -R, indicate the external pilot specification R for the applicable valves as well. Note 5) uilt-in silencer type does not satisfy IP67.

29 Gateway Decentralized System 5 Port Solenoid Valve Series VQC000 How to Order Valves Type of actuation -position single Note) -position dual 3-port valve (N.C./N.C.) -position double Note) -position dual 3-port valve (N.O./N.O.) 3 3-position closed center C Note) -position dual 3-port valve (N.C./N.O.) 3-position exhaust center 5 3-position pressure center Note) Only rubber seal type VQC 0 0 N 5 C D E F Seal type 0 Metal seal Rubber seal C Function Negative common, N Standard (0. W) Negative common, Quick N response type (0.95 W) KN Note ) Negative common, High pressure type (.0 MPa, 0.95 W) NR Note ) Negative common, External pilot Note ) ) KNR Negative common, High pressure type (.0 MPa, 0.95 W), External pilot Note ) For KN or KNR high pressure type, select 0 metal seal. Note ) For NR or KNR external pilot, select to 5. -position dual 3-port valve is unavailable. D Coil voltage 5 VDC F Manual override Non-locking push (tool required) Locking push (tool required) C Turn locking (manual) D Slide locking (manual) Gateway Decentralized System SY VQC S0700 SV E Light/surge voltage suppressor With light/surge voltage suppressor How to Order Manifold ssembly Example -position single -position double Manifold base U side D side 3 Stations VV5QC-0C6SD3N set (Manifold base part number) * VQC00N-5 sets (-position single part number) * VQC00N-5 sets (-position double part number) The asterisk denotes the symbol for assembly. Prefix it to the part numbers of the valve etc. The valve arrangement is numbered as the st station from the D side. Under the manifold base part number, state the valves to be mounted in order from the st station as shown in the figure above. If the arrangement becomes complicated, specify on the manifold specification sheet. 6

30 Series VQC000 Dimensions.5 L L (Pitch) P = () Indicator light.5 x M Mounting hole (35) (0) (8) SI Unit () Manual override (L3) (DIN rail mounting hole pitch:.5) (L) (5.5) (5.5) D side Station n U side M [(P), 3(R) port] pplicable tube O.D. C8: ø8 N9: ø5/6" OUT R R IN 3 X P 3 X P (7.5) M M5 x 0.8 [(), () port] pplicable tube O.D.: ø3., ø/8" ø, ø5/3" ø6, ø/" L: Dimensions L n L L L L L n L L L L n: Stations

31 w, port size Metric size C Straight piping: ø C6 Straight piping: ø6 C8 Straight piping: ø8 CM Note) Straight piping: Mixed sizes and with port plug L Top ported elbow: ø L6 Top ported elbow: ø6 L8 Top ported elbow: ø8 ottom ported elbow: ø 6 ottom ported elbow: ø6 8 ottom ported elbow: ø8 LM Note) Elbow piping: Mixed sizes and with port plug Mixed size for different types of piping, option installed MM Note) Inch size N Straight piping: ø/8" N3 Straight piping: ø5/3" N7 Straight piping: ø/" NM Note) Straight piping: Mixed sizes and with port plug LN Top ported elbow: ø/8" LN3 Top ported elbow: ø5/3" LN7 Top ported elbow: ø/" N ottom ported elbow: ø/8" N3 ottom ported elbow: ø5/3" N7 ottom ported elbow: ø/" LNM Note) Elbow piping: Mixed sizes and with port plug NM Note ) Mixed size for different types of piping, option installed Note ) Indicate the sizes on the manifold specification sheet. Note ) When a combination of straight and elbow piping is or when option such as dual flow fitting assembly is mounted, please mention the mounting conditions in the Manifold Specification. 5 Port Solenoid Valve For detailed specifications, Common Precautions and Specific Product Precautions, refer to the WE catalog or the VQC000/000 series catalog (CT. ES-0). q Valve stations Stations Note 0 station Double wiring stations 0 station Mixed wiring, Specified layout Note) stations (vailable up to solenoids) Note) Specified layout: Indicate the wiring specifications on the manifold specification sheet. (Note that -position double, 3-position and -position valves cannot be used where single wiring has been specified.) In addition, select the option K. Gateway Decentralized System Series VQC000 How to Order Manifold VV5QC C8 SD3 N q w e r e SI Unit (Number of outputs, Max. number of valve stations) SD0 Without SI Unit SD3 3 outputs Note, 3), to stations ( stations Note ) ) Note ) Due to the internal wiring of the valve, the maximum number of outputs is points. 6 outputs can be set by switching the built-in setting switch. Note ) ( ): Maximum number of stations for mixed single and double wiring. Note 3) When using the SI Unit with 3 outputs, use the GW Unit compatible with the EX500 Gateway Decentralized System (8 points). r SI Unit (Output polarity) (Without SI Unit) N Negative common * Ensure a match with the common specification of the valve to be used. t t Option None Note ) With back pressure check valve (ll stations) D With DIN bracket, DIN rail with standard length D0 With DIN bracket, without DIN rail Dl Note ) With DIN bracket, DIN rail for l stations K Note 3) Special wiring specification (Except double wiring) N With name plate R Note ) External pilot S Note 5) uilt-in silencer, Direct exhaust T Note 6) P and R ports included on both sides of the U side * When multiple symbols are specified, indicate them alphabetically. Example) -RS Note ) When a back pressure check valve is used only for specified station, specify the back pressure check valve part number, and specify the station number to which the valve is mounted, on the manifold specification sheet. Note ) l: Specify a longer rail than the length of valve stations. Example) -D08 In this case, the valves will be mounted on the DIN rail for 8 stations, regardless of the number of manifold stations. Note 3) When single wiring and double wiring are mixed, specify wiring type of each station on the manifold specification sheet. Note ) For external pilot option -R, indicate the external pilot specification R for the applicable valves as well. Note 5) uilt-in silencer type does not satisfy IP67. Note 6) P and R ports are included on both sides of U side (cylinder port and coil side) with ø s. Gateway Decentralized System SY VQC S0700 SV 8

32 Series VQC000 How to Order Valves VQC 0 0 N 5 C D E F Type of actuation -position single Note) -position dual 3-port valve (N.C./N.C.) -position double Note) -position dual 3-port valve (N.O./N.O.) 3 3-position closed center C Note) -position dual 3-port valve (N.C./N.O.) 3-position exhaust center 5 3-position pressure center Note) Only rubber seal type Seal type 0 Metal seal Rubber seal C Function Negative common, N Standard (0. W) Negative common, Quick N response type (0.95 W) KN Note ) Negative common, High pressure type (.0 MPa, 0.95 W) NR Note ) Negative common, External pilot Note ) ) KNR Negative common, High pressure type (.0 MPa, 0.95 W), External pilot Note ) For KN or KNR high pressure type, select 0 metal seal. Note ) For NR or KNR external pilot, select to 5. -position dual 3-port valve is unavailable. F Manual override Non-locking push (tool required) Locking push (tool required) C Turn locking (manual) D Slide locking (manual) D Coil voltage 5 VDC E Light/surge voltage suppressor With light/surge voltage suppressor How to Order Manifold ssembly Example -position single -position double Manifold base U side 9 D side 3 Stations VV5QC-0C6SD3N set (Manifold base part number) * VQC00N-5 sets (-position solenoid part number) * VQC00N-5 sets (-position double part number) The asterisk denotes the symbol for assembly. Prefix it to the part numbers of the valve etc. The valve arrangement is numbered as the st station from the D side. Under the manifold base part number, state the valves to be mounted in order from the st station as shown in the figure above. If the arrangement becomes complicated, specify on the manifold specification sheet.

33 Gateway Decentralized System 5 Port Solenoid Valve Series VQC000 Dimensions () L Indicator light L (Pitch) P = (Double sided type) x M5 Mounting hole (8) (5.5) (35) (53.5) (0.5) 0 Gateway Decentralized System SI Unit M (3.5) 57. Manual override (L3) (DIN rail mounting hole pitch:.5) (L) D side Station n U side (5.5) (5.5) [(P), 3(R) port] pplicable tube O.D. C0: ø0 N: ø3/8" C: ø (Double sided type) ( ) SY VQC S0700 SV OUT R R IN X 3 P 3 X P (7.5) M [(), () port] pplicable tube O.D.: ø, ø5/3" ø6, ø/" ø8, ø5/6" L: Dimensions L n L L L L n: Stations L n L L L L

34 Gateway Decentralized System 5 Port Solenoid Valve Series VQC000 For detailed specifications, Common Precautions and Specific Product Precautions, refer to the WE catalog or the VQC000/5000 series catalog (CT. ES-08). How to Order Manifold VV5QC 0 SD3 N q w e r t y q Valve stations Stations Note 0 station Double wiring stations 0 station Mixed wiring, Specified layout Note) 6 6 stations (vailable up to solenoids) Note) Specified layout: Indicate the wiring specifications on the manifold specification sheet. (Note that -position double, 3-position and -position valves cannot be used where single wiring has been specified.) In addition, select the option K. r SI Unit (Number of outputs, Max. number of valve stations) SD0 Without SI Unit SD3 3 outputs Note, 3), to stations (6 stations Note ) ) Note ) Due to the internal wiring of the valve, the maximum number of outputs is points. Note ) ( ): Maximum number of stations for mixed single and double wiring. Note 3) When using the SI Unit with 3 outputs, use the GW Unit compatible with the EX500 Gateway Decentralized System (8 points). w Cylinder port size C6 With ø6 C8 With ø8 C0 With ø0 C With ø N7 ø/" N9 ø5/6" N ø3/8" 0 / Note) 03 3/8 Note) ottom ported / Note) CM Mixed sizes Note) Compatible with Rc, G, NPT/NPTF. Part number displayed is as shown below. t SI Unit (Output polarity) (Without SI Unit) N Negative common y Option None K Special wiring specification (Except double wiring) N With name plate (available for T kit only) Direct EXH outlet with built-in silencer S Note) Note) The silencer is built into the R port passage of the end plate and the silenced air is exhausted from the R port. * When two or more symbols are specified, indicate them alphabetically. Example: -KNS e Thread type F N T Rc G NPT NPTF 3

35 Gateway Decentralized System 5 Port Solenoid Valve Series VQC000 How to Order Valves Type of actuation -position single 3-position exhaust center -position double 5 3-position pressure center 3 3-position closed center 6 Note) 3-position double check Note) For double check type, refer to the WE catalog or the VQ000/5000 series catalog (CT. ES-0). Seal type 0 Metal seal Rubber seal VQC C D E F C Function Note ) Standard (0.95 W) Y Low wattage type (0. W) R Note ) External pilot * When multiple symbols are specified, indicate them alphabetically. Note ) When the power is energized continuously, refer to Specific Product Precautions in the WE catalog or the VQC000/5000 series catalog (CT. ES- 08). Note ) For details about the external pilot type, refer to the WE catalog or the VQ000/5000 series catalog (CT. ES-0). In addition, an external pilot type cannot be combined with the double check spacer. D Coil voltage 5 VDC E Light/surge voltage suppressor With Without light, with surge E voltage suppressor F Manual override Non-locking push (tool required) Locking push (tool required) C Turn locking (manual) Gateway Decentralized System SY VQC S0700 SV How to Order Manifold ssembly Example -position single Manifold base U side D side 3 Valve stations VV5QC-0C8SD3N set (Manifold base part number) * VQC00-5 sets (-position single part number) The asterisk denotes the symbol for assembly. Prefix it to the part numbers of the valve etc. The valve arrangement is numbered as the st station from the D side. Under the manifold base part number, state the valves to be mounted in order from the st station as shown in the figure above. If the arrangement becomes complicated, specify on the manifold specification sheet. 3

36 39.5 Indicator light Manual override U side L L (6.5) SI Unit (Station ) (Station n) 3/" 3(R) port M /" (P) port M /8" External pilot port /8" PE port /",3/8" C6, C8, C0, C, N7, N9, N (),() port ottom ported <P, R port side> <ottom side> U side P = 5 3 n D side R 3 3 R OUT IN P X PE P PE X SMC SMC SMC 65.5 R X 3 PE 3 X R P Series VQC000 Dimensions D side P PE Station n x /" (), () port Other dimensions are the same as the side ported type. Formula: L = 5n + 06, L = 5n + 5 n: Stations (Maximum 6 stations) L n L L

37 q Valve stations Stations Note 0 station Double wiring stations 0 station Mixed wiring, Specified layout Note) 6 6 stations (vailable up to solenoids) Note) Specified layout: Indicate the wiring specifications on the manifold specification sheet. (Note that -position double, 3-position and -position valves cannot be used where single wiring has been specified.) In addition, select the option K. Gateway Decentralized System 5 Port Solenoid Valve Series VQC5000 For detailed specifications, Common Precautions and Specific Product Precautions, refer to the WE catalog or the VQC000/5000 series catalog (CT. ES-08). How to Order Manifold VV5QC 5 03 q w e SD3 N r SI Unit (Number of outputs, Max. number of valve stations) SD0 Without SI Unit SD3 3 outputs Note, 3), to stations (6 stations Note ) ) Note ) Due to the internal wiring of the valve, the maximum number of outputs is points. Note ) ( ): Maximum number of stations for mixed single and double wiring. Note 3) When using the SI Unit with 3 outputs, use the GW Unit compatible with the EX500 Gateway Decentralized System (8 points). r t y Gateway Decentralized System SY VQC S0700 SV w Cylinder port size 03 3/8 Note) 0 / Note) ottom ported / Note) CM Mixed sizes Note) Compatible with Rc, G, NPT/NPTF. Part number displayed is as shown below. t SI Unit (Output polarity) (Without SI Unit) N Negative common y Option None Special wiring specification (Except double wiring) K Note) Note) When single wiring and double wiring are mixed, specify wiring type of each station on the manifold specification sheet. e Thread type F N T Rc G NPT NPTF 3

38 Series VQC5000 How to Order Valves VQC C D E F Type of actuation -position single 3-position exhaust center -position double 5 3-position pressure center 3 3-position closed center 6 Note) 3-position double check Note) For double check type, refer to the WE catalog or the VQ000/5000 series catalog (CT. ES-0). Seal type 0 Metal seal Rubber seal C Function Note ) Standard (0.95 W) Y Low wattage type (0. W) R Note ) External pilot * When multiple symbols are specified, indicate them alphabetically. Note ) When the power is energized continuously, refer to Specific Product Precautions in the WE catalog or the VQC000/5000 series catalog (CT. ES- 08). Note ) For details about the external pilot type, refer to the WE catalog or the VQ000/5000 series catalog (CT. ES-0). F Manual override Non-locking push (tool required) Push-turn locking (tool required) D Coil voltage 5 VDC E Light/surge voltage suppressor With Without light, with surge E voltage suppressor C Turn locking (manual) How to Order Manifold ssembly Example -position double -position single U side Manifold base D side Valve stations VV5QC5-0603SD3N set * VQC500-5 sets (-position single part number) * VQC500-5 sets (-position double part number) * VQC sets (3-position closed center part number) The asterisk denotes the symbol for assembly. Prefix it to the part numbers of the valve etc. C 35 The valve arrangement is numbered as the st station from the D side. Under the manifold base part number, state the valves to be mounted in order from the st station as shown in the figure above. If the arrangement becomes complicated, specify on the manifold specification sheet.

39 Indicator light P = L L Manual override (Single, Double, 3-position: Rubber seal type) 8.5 (3-position: Metal seal type) P R R PE SI Unit /" 3(R) port Communication connector C (M Female thread) D side X n 9 U side M5 x 0.8 Ground screw 5.5 3/" (P), 5(R), 3(R) port /8" PE. port Communication connector C (M Male thread) /" (P) port /8", /" (), () port /8" External pilot port ottom ported <P, R port side> <ottom side> U side D side 3 n Gateway Decentralized System 5 Port Solenoid Valve Series VQC5000 Dimensions Gateway Decentralized System Station SY VQC S0700 SV SMC SMC SMC X 58.5 P = Station Other dimensions are the same as the side ported type. n x /" (), () port Formula: L = n + 77, L = n + n: Stations (Maximum stations) L n L L C

40 Gateway Decentralized System 5 Port Solenoid Valve Series S0700 For detailed specifications, Common Precautions and Specific Product Precautions, refer to the WE catalog or the S0700 series catalog (CT. ES-88). How to Order Manifold SS C C8 SD3 N q w e r t y q Valve stations Stations Note 0 station Double wiring 6 6 stations 0 station Mixed wiring, Specified layout Note) stations (vailable up to 3 solenoids) Note) Specified layout: Indicate the wiring specifications on the manifold specification sheet. (Note that -position double, 3-position and -position valves cannot be used where single wiring has been specified.) In addition, select the option K. r SI Unit (Number of outputs, Max. number of valve stations) SD0 Without SI Unit SD3 3 outputs Note, 3), to 6 stations ( stations Note ) ) Note ) 6 outputs can be set by switching the built-in setting switch. Note ) ( ): Maximum number of stations for mixed single and double wiring. Note 3) When using the SI Unit with 3 outputs, use the GW Unit compatible with the EX500 Gateway Decentralized System (8 points). w, port size Metric size C ø C3 ø3. C ø CM Note) Mixed sizes and with port plug Inch size N ø/8" N3 ø5/3" Mixed sizes and with port plug NM Note) Note) Indicate the sizes on the manifold specification sheet. e P, R port size Metric size ø8 Note) C6 ø6 C8 ø8 Inch size N7 ø/" N9 ø5/6" Note) When and ports are inch size, the will be changed to ø5/6". t SI Unit (Output polarity) (Without SI Unit) N Negative common y Option None Note ) With back pressure check valve (ll stations) D With DIN bracket, DIN rail with standard length D0 With DIN bracket, without DIN rail Dl Note ) With DIN bracket, DIN rail for l stations K Note 3) Special wiring specification (Except double wiring) N With name plate R Note ) External pilot S uilt-in silencer * When multiple symbols are specified, indicate them alphabetically. Example) -KN Note ) When a back pressure check valve is used only for specified station, specify the back pressure check valve part number, and specify the station number to which the valve is mounted, on the manifold specification sheet. Note ) l: Specify a longer rail than the length of valve stations. Example) -D08 In this case, the valves will be mounted on the DIN rail for 8 stations, regardless of the number of manifold stations. Note 3) When single wiring and double wiring are mixed, specify wiring type of each station on the manifold specification sheet. Note ) For external pilot option -R, indicate the external pilot specification R for the applicable valves as well. 37

41 Gateway Decentralized System 5 Port Solenoid Valve Series S0700 How to Order Valves Type of actuation -position single -position double Note) -position dual 3-port (N.C. + N.C.) [Exhaust center] Note) -position dual 3-port (N.O. + N.O.) [Pressure center] C Note) -position dual 3-port (N.C. + N.O.) Note) For -position dual 3-port, select internal pilot. S Function R Note) C Internal pilot External pilot Note) For external pilot, select -position single or -position double. C Rated voltage 5 VDC Gateway Decentralized System SY VQC S0700 SV How to Order Manifold ssembly Example Manifold base -position double -position dual 3-port U side D side 3 Stations SS0750-0CSD3 set (Manifold base part number) * S070-5 sets (-position double part number) * S070-5 sets (-position dual 3-port number) The asterisk denotes the symbol for assembly. Prefix it to the part numbers of the valve etc. The valve arrangement is numbered as the st station from the D side. Under the manifold base part number, state the valves to be mounted in order from the st station as shown in the figure above. If the arrangement becomes complicated, specify on the manifold specification sheet. 38

42 Series S0700 Dimensions () (76.7) L L3 L L. (n ) x Light 8.5 Manual override 0. (35) (5.5) S070-5 S070-5 S070-5 S070-5 S070-5 S070-5 S070-5 S SI Unit x M Mounting hole D side Station n U side M OUT IN () (7.5) M [(P), 3(R) port] pplicable tube O.D.: ø6, ø/" ø8, ø5/6" [(), () port] pplicable tube O.D.: ø ø3., ø/8" ø, ø5/3" Dimensions L n L L L L L n L L L L Formula: L = 8.5n + 3, L = 8.5n + 7 n: Stations (Maximum stations)

43 SS5V 5 Port Solenoid Valve Series SV000/000/3000 For detailed specifications, Common Precautions and Specific Product Precautions, refer to the WE catalog or the SV series catalog (CT. ES-8). q Series SV000 SV000 3 SV3000 w SI Unit (Number of outputs, Output polarity, Max. number of valve stations) 0 Without SI Unit 3N 3 outputs Note, 3), Negative common, to 6 stations (0 stations Note ) ) Note ) 6 outputs can be set by switching the built-in setting switch. Note ) ( ): Maximum number of stations for mixed single and double wiring. Note 3) When using the SI Unit with 3 outputs, use the GW Unit compatible with the EX500 Gateway Decentralized System (8 points). e Valve stations Stations Note 0 stations Double wiring Note ) 6 6 stations 0 stations Mixed wiring, Specified layout Note ) 0 0 stations (vailable up to 3 solenoids) Note ) Double wiring: single, double, 3-position and -position valves can be used on all manifold stations. Use of a single solenoid will result in an unused control signal. If this is not desired, order with a specified layout. Note ) Specified layout: Indicate the wiring specifications on the manifold specification sheet. (Note that double, 3-position and -position valves cannot be used where single wiring has been specified.) Gateway Decentralized System How to Order Manifold W 0 S 3N D 05 U q w e r r P, E port entry U U side ( to 0 stations) D D side ( to 0 stations) oth sides ( to 0 stations) t SUP/EXH block assembly Internal pilot S Internal pilot, uilt-in silencer Note) R External pilot RS External pilot, uilt-in silencer Note) Note) When the built-in silencer type is used, keep the exhaust port from coming in direct contact with water or other liquids. t y u u Mounting Direct mounting D With DIN bracket, DIN rail with standard length D0 With DIN bracket, without DIN rail With DIN bracket, DIN rail for 3 stations D3 Note) y, port size Metric size, port P, E port pplicable series C3 ø3. ø8 C ø One-touch SV000 C6 ø6 fitting C ø ø0 C6 ø6 One-touch SV000 C8 ø8 fitting C6 ø6 ø C8 ø8 One-touch SV3000 C0 ø0 fitting M Note), port mixed Inch size, port P, E port pplicable series N ø/8" ø5/6" N3 ø5/3" One-touch SV000 N7 ø/" fitting N3 ø5/3" ø3/8" N7 ø/" One-touch SV000 N9 ø5/6" fitting N7 ø/" ø3/8" N9 ø5/6" One-touch SV3000 N ø3/8" fitting M Note), port mixed Note) Indicate the sizes on the manifold specification sheet. * The X and PE port size of external pilot type [R, RS] are ø (mm) or ø5/3 (inch) for the SV000/000 series, and ø6 (mm) or ø/ (inch) for the SV3000 series. D0 Note) With DIN bracket, DIN rail for 0 stations Note) Specify a longer rail than the length of valve stations. * If the DIN rail must be mounted without an SI Unit, select D0 and order the DIN rail separately. Refer to L3 of the dimensions for the DIN rail length. For the DIN rail part number, refer to the WE catalog or the SV series catalog (CT. ES-8). Gateway Decentralized System SY VQC S0700 SV 0

44 Series SV000/000/3000 How to Order Valves SV F C D E F G H I Series SV000 SV000 3 SV3000 Type of actuation -position single -position double 3 3-position closed center 3-position exhaust center 5 3-position pressure center Note) -position dual 3-port valve (N.C./N.C.) Note) -position dual 3-port valve (N.O./N.O.) C Note) -position dual 3-port valve (N.C./N.O.) Note) Select the SV000 or SV000 series for the -position dual 3-port valve. * Select the internal pilot type for the -position dual 3-port valve. D ack pressure check valve None K uilt-in * uilt-in back pressure check valve type is applicable to the SV000 series only. * The product with a back pressure check valve is not available for 3-position valves. * Refer to the WE catalog for built-in back pressure check valve type. E Rated voltage 5 VDC F Light/surge voltage suppressor U With light/surge voltage suppressor R Without light, with surge voltage suppressor G Manual override Non-locking push D Push-turn locking (slotted) C Pilot type R Internal pilot External pilot H Manifold block If stations are to be added, order the product with manifold block. (For details, refer to the WE catalog.) I Made to Order Main valve fluororubber specification X90 (For details, refer to the WE catalog.) How to Order Manifold ssembly Example -position double -position single Manifold base U side D side Stations 3 SS5V-W0S3ND-0-C6 set (Manifold base part number) * SV00-5FU sets (-position single part number) * SV00-5FU sets (-position double part number) The asterisk denotes the symbol for assembly. Prefix it to the part numbers of the valve etc. The valve arrangement is numbered as the st station from the D side. Under the manifold base part number, state the valves to be mounted in order from the st station as shown in the figure above. If the arrangement becomes complicated, specify on the manifold specification sheet.

45 Gateway Decentralized System 5 Port Solenoid Valve Series SV000 Dimensions Tie-rod ase Series SV (35).9 (5.5) (8) (L) [X: External pilot port] Note ) pplicable tube O.D. C: ø (SMC) N3: ø5/3" (SMC) M 67. (56.5) (External pilot spec.) 6..7 (3) D side Manual override () port side: Orange () port side: Green 5.6 (5) SI Unit Silencer M (Station ) (L) (L) (DIN rail mounting hole pitch:.5) Light/surge voltage suppressor 33.7 IN (.9) (C6: 3.) (N7: 7) 3-NC 3-NC L5 L3 (Station n) x ø5.3 (For mounting) 9.6 (39.6) (.3) (8.) [PE: Pilot EXH port] pplicable tube O.D. C: ø (SMC) N3: ø5/3" (SMC) OUT P P E 3/5 E 3/5 U side (7.5) (.8) Gateway Decentralized System SY VQC S0700 SV 0 [(P), 3/5(E) port] Note ) pplicable tube O.D. C8: ø8 (SMC) N9: ø5/6" (SMC) (Pitch) P = 0.5 [(), () port] pplicable tube O.D. C3: ø3. (SMC) C: ø (SMC) C6: ø6 (SMC) N: ø/8" (SMC) N3: ø5/3" (SMC) N7: ø/" (SMC) Note ) External pilot port positions and silencer discharge port positions are the same as P, E port outlet positions. Note ) When P, E port outlets are indicated on the U side or D side, the P, E ports on the opposite side are plugged. L: DIN Rail Overall Length n: Stations L n L L L L L

46 Series SV000 Dimensions Tie-rod ase Series SV000 D side Manual override () port side: Orange () port side: Green 5.9 (5) (L) (L) (DIN rail mounting hole pitch:.5) Light/surge voltage suppressor U side (35) (5.5).8 (53.) 9.6 (8) 3-NC 3-NC SI Unit Silencer (L) 3. (5.3) (.9) L5 L3 x ø5.3 (For mounting) (Station ) (Station n) [X: External pilot port] Note ) pplicable tube O.D. C: ø (SMC) N3: ø5/3" (SMC) M (3.9) (9.5) [PE: Pilot EXH port] pplicable tube O.D. C: ø (SMC) N3: ø5/3" (SMC) (63.5) (External pilot spec.) (9.9) M OUT IN P E 3/5 P E 3/ (7.5) (.8) [(P), 3/5(E) port] Note ) pplicable tube O.D. C0: ø0 (SMC) N: ø3/8" (SMC) (Pitch) P = 6 [(), () port] pplicable tube O.D. C: ø (SMC) C6: ø6 (SMC) C8: ø8 (SMC) N3: ø5/3" (SMC) N7: ø/" (SMC) N9: ø5/6" (SMC) Note ) External pilot port positions and silencer discharge port positions are the same as P, E port outlet positions. Note ) When P, E port outlets are indicated on the U side or D side, the P, E ports on the opposite side are plugged. L: DIN Rail Overall Length n: Stations L n L L L L L

47 Gateway Decentralized System 5 Port Solenoid Valve Series SV3000 Dimensions Tie-rod ase Series SV3000 D side (5) 5. (5.5) (35) (8) x ø5.3 (For mounting) (L) (DIN rail mounting hole pitch:.5) (L) Light/surge voltage suppressor Manual override () port side: Orange () port side: Green U side (6.9) Gateway Decentralized System SI Unit Silencer (L) [X: External pilot port] Note ) pplicable tube O.D. C6: ø6 (SMC) N7: ø/" (SMC) M 36. (7.7) (5.) (5.3) (Station ) () L5 L3 (Station n) [PE: Pilot EXH port] pplicable tube O.D. C6: ø6 (SMC) N7: ø/" (SMC) [(), () port] pplicable tube O.D. C6 : ø6 (SMC) C8 : ø8 (SMC) C0: ø0 (SMC) N7 : ø/" (SMC) N9 : ø5/6" (SMC) N: ø3/8" (SMC) SY VQC S0700 SV (76.8) (External pilot spec.) (60.3) M OUT IN P P E 3/5 E 3/ (0) (.7) 53.. (Pitch) P = 0.5 [(P), 3/5(E) port] Note ) pplicable tube O.D. C: ø (SMC) N: ø3/8" (SMC) Note ) External pilot port positions and silencer discharge port positions are the same as P, E port outlet positions. Note ) When P, E port outlets are indicated on the U side or D side, the P, E ports on the opposite side are plugged. L: DIN Rail Overall Length n: Stations L n L L L L L

48 Series EX500 Precautions on Mixed Usage of Gateway Decentralized System (8 Points) and Gateway Decentralized System (6 Points) GW Unit Gateway Decentralized System (8 points) EX500-GEN EX500-GPN Gateway Decentralized System (6 points) EX500-GDN EX500-GPR Gateway Decentralized System (8 points) EX500-S03 EX500-DXll Usable Usable Same functions of Gateway Decentralized System (6 points) SI Unit Input Unit Gateway Decentralized System (6 points) EX500-S00 EX500-Q00/00 EX500-Q0/0 EEX500-I-l (EX500-I) Usable Same functions of Gateway Decentralized System (6 points) Usable 5

Series EX500 Gateway Decentralized System (6 Points) ) Valve manifold and Input Unit can be connected around the GW (Gateway) Unit. ) Compatible with other protocols by replacing the GW Unit.

49 Series EX500 Gateway Decentralized System (6 Points) ) Valve manifold and Input Unit can be connected around the GW (Gateway) Unit. ) Compatible with other protocols by replacing the GW Unit. ) Number of inputs/outputs = 6 points/6 points. The number of outputs (solenoids) per branch is 6 points. ) Number of valve manifold connections = Max. Units, Number of Input Unit connections = Max. Units, Cable length = Max. 0 m ) No need to set the address for the valve manifold and Input Unit. Gateway Decentralized System SY SY3000/5000/7000 Page 57 VQC VQC000/000/000/5000 Page 65 S0700 Page 77 S0700 SV000/000/3000/000 Page 80 SV 6

EX500 SERIES Series EX500 Gateway Decentralized System (6 Points) GW Unit How to Order RoHS DN PR EX500 G DN Communication protocol DeviceNet (Input/Output = 6 points/6 points) PROFIUS DP

50 EX500 SERIES Series EX500 Gateway Decentralized System (6 Points) GW Unit How to Order RoHS DN PR EX500 G DN Communication protocol DeviceNet (Input/Output = 6 points/6 points) PROFIUS DP (Input/Output = 6 points/6 points) Specifications Communication Power supply voltage Current consumption ranch port Environment Model EX500-GDN EX500-GPR Protocol DeviceNet PROFIUS DP Version Note ) Release.0 DP-V0 Communication speed 5 k/50 k/500 kbps 9.6 k/9. k/5.5 k/ k/87.5 k/500 k/.5 M/3 M/6 M/ Mbps Configuration file Note ) EDS file GSD file Number of inputs/outputs (I/O occupation area) Terminating resistor For control Not provided 6 inputs/6 outputs (8 bytes/8 bytes) to 5 VDC (Supplied by DeviceNet circuit, 50 m or less) For input device VDC ±0% For valve VDC +0%, 5% For input and control uilt into the Unit VDC ±0% 3.0 or less (Max. 0.7 per branch x branches + GW Unit internal current consumption: 0. or less) For valve 3.0 or less (Max per branch x branches) Number of branch ports ports Number of inputs and outputs ranch cable length Enclosure Operating temperature range Operating humidity range Standards Weight Enclosed parts 6 inputs/6 outputs per branch 5 m or less between connected devices (0 m or less per branch) IP65 Operating: 5 to 5 C, Stored: 5 to 70 C (No freezing and condensation) Operating, Stored: 35 to 85%RH (No condensation) CE marking, UL (CS), RoHS compliant 70 g Seal cap (for M connector) pcs. Seal cap (for M connector) 5 pcs. Note ) Note that the version is subject to change. Note ) Each file can be downloaded from SMC website, Dimensions/Parts Description EX500-GDN (DeviceNet ) Communication connector (M, 5 pins, -coded, plug) Power supply connector (M, 5 pins, -coded, socket) US 8 Indicator LED MS NS SOL GTEWY UNIT VDC COM COM COM C COM D ranch port M, 8 pins, -coded, socket 8.8 Communication connector (M, 5 pins, -coded, plug) Communication connector (M, 5 pins, -coded, socket) Power supply connector (M, 5 pins, -coded, plug) IN OUT US EX500-GPR (PROFIUS DP) 8 Indicator LED RUN SOL F DI Cover screw x M3 GTEWY UNIT EX500 SERIES VDC COM COM COM C COM D ranch port M, 8 pins, -coded, socket PE Cover screw x M3 PE 0 6 Cover (Setting switch) Mounting hole x M5 Ground terminal (FE) M Cover (Setting switch) Mounting hole x M5 Ground terminal (FE) M

51 Series EX500 Gateway Decentralized System (6 Points) SI Unit Output Unit for valve manifold connection For SV000/000/3000/000 How to Order EX500 S00 RoHS pplicable valve: Series SV Specifications Model Number of outputs Output type Output Supply current Rated voltage Internal current consumption Enclosure Environment Operating temperature range Operating humidity range Standards Weight Enclosed parts Dimensions/Parts Description EX500-S00 EX500-S00 6 outputs Sink/NPN (Positive common) Max V 00 m or less IP67 Operating: 5 to 5 C, Stored: 5 to 70 C (No freezing and condensation) Operating, Stored: 35 to 85%RH (No condensation) CE marking, UL (CS), RoHS compliant 5 g Seal cap (for M connector socket) pc. Position indicator LED Gateway Decentralized System ranch connector (C) (M, 8 pins, -coded, socket) ranch connector (C) (M, 8 pins, -coded, plug) SY VQC S0700 SV 8

52 Series EX500 For SY3000/5000/7000, VQC000/000/000/5000, S0700 How to Order EX500 Q 0 0 pplicable valve: Series SY/VQC/S0700 EX500 series Output specification 0 NPN (Positive common) PNP (Negative common) SI Unit type For without EX9 output block For EX9 output block mounting Specifications Model EX500-Q00 EX500-Q0 EX500-Q00 EX500-Q0 Number of outputs 6 outputs Output Output type Sink/NPN (Positive common) Source/PNP (Negative common) Sink/NPN (Positive common) Source/PNP (Negative common) Rated voltage VDC Supply current Max Internal current consumption 00 m or less Enclosure IP67 Environment Operating temperature range Operating: 5 to 5 C, Stored: 5 to 70 C (No freezing and condensation) Operating humidity range Operating, Stored: 35 to 85%RH (No condensation) Standards CE marking, RoHS compliant Weight 05 g Enclosed parts Seal cap (for M connector socket) pc. Dimensions/Parts Description EX500-Ql0 Position indicator LED EX500-Ql0 Position indicator LED x M Mounting hole ranch connector (0) (M, 8 pins, -coded, socket) ranch connector () (M, 8 pins, -coded, plug) ranch connector (0) (M, 8 pins, -coded, socket) ranch connector () (M, 8 pins, -coded, plug) PWR COM SI UNIT PWR COM EX500 series

Series EX500 Gateway Decentralized System (6 Points) Input Manifold RoHS How to Order Input Manifold How to Order Input lock EEX500 I Connector type E M8 connector T M connector M M8, M mixed E 8

53 Series EX500 Gateway Decentralized System (6 Points) Input Manifold RoHS How to Order Input Manifold How to Order Input lock EEX500 I Connector type E M8 connector T M connector M M8, M mixed E 8 Stations station 8 8 stations EX500 IE lock type M8 connector, inputs, PNP specification M8 connector, inputs, NPN specification 3 M connector, inputs, PNP specification M connector, inputs, NPN specification 5 M8 connector, 8 points integrated type, PNP specification 6 M8 connector, 8 points integrated type, NPN specification Input Unit Input Manifold Input block (M8 connector) Input block (M connector) DIN rail End block Input block (M8 connector) 8 points integrated type How to Order Input Manifold [Ordering Example] When ordering an Input Unit manifold, enter the Input manifold part number + Input block part number. Please mention the connected input block part numbers in order from the Input Unit side under the input manifold part number. When an input block layout becomes complicated, indicate in the Input Unit manifold specification sheet. * The Input Unit, End block and DIN rail are included in the input manifold. Example ) M8 Input block only EEX500-I-E8 set * EX500-IE5 sets Note) EEX500-I-E8 set * EX500-IE 8 sets Example ) M Input block only Example 3) M8, M mixed EEX500-I-T set * EX500-IE sets EEX500-I-M6 set * EX500-IE sets * EX500-IE3 sets EEX500-I-E6 set * EX500-IE5 set Note) * EX500-IE sets Note) 8-point integrated type input block (EX500-IE5/6) is equivalent to stations of -point input block (EX500-IE/). 50 Gateway Decentralized System SY VQC S0700 SV

Fieldbus System (Output device for driving 5 port solenoid valves)

Fieldbus System (Output device for driving port solenoid valves) New Compact 8mm (ctual size) Space-saving Installation IP67 RoHS EtherNet/IP added! For units with D-sub connector, and when connected to