Compact Modular Fuse Holders. Products for Industrial, PV, IEC and UL Applications

Size: px

Start display at page:

Download "Compact Modular Fuse Holders. Products for Industrial, PV, IEC and UL Applications"

Allan Lee
5 years ago
Views:

1 Compact Modular Fuse Holders Products for Industrial, PV, IEC and UL Applications

2 Cooper Bussmann, a division of Cooper Industries, is the leading source of circuit protection solutions in the global marketplace. Cooper Bussmann products are approved for use around the world and meet agency requirements and international standards: IEC, VDE, DIN, UL, CSA, CCC, BS and others. Cooper Bussmann global headquarters are in St Louis, Missouri (US) and the European headquarters are in BurtonontheWolds, Leicestershire (UK). Cooper Bussmann manufactures over 50,000 part numbers covering extensive circuit protection solutions for a wide range of applications: residential, industrial, motor protection, power conversion, distribution, telecommunications, electronics and automotive. Cooper Bussmann has been a leading exponent in the design, development and manufacture of fuse links and their associated accessories for more than 90 years and has supplied fuse links to more than 90 countries worldwide. The Cooper Bussmann team of specialist engineers plays a leading role in international standardisation of fuse links, offering comprehensive advice on selection and applications. With a continual commitment to meet our customers needs with innovative high quality products with ISO 900 approval systems, Cooper Bussmann is the supplier of choice for circuit protection solutions, today. For product data sheets,

Compact DINRail Mountable Fuse Holders Cooper Bussmann CH modular fuse holders offer a set of advantages you can t find anywhere else.

capacity the new CH series is suitable for all manner of applications, compliant to: IEC 6069 IEC 6069 UL 448 UL 4488 Smallest Footprint The CH has been

The Cooper Bussmann CH is up to 0% smaller than the competition allowing better utilisation of valuable panel space.

PV (yellow), IEC (red) and UL (black) holders have individual colours making it easy to recognise at a glance.

3 Compact DINRail Mountable Fuse Holders Cooper Bussmann CH modular fuse holders offer a set of advantages you can t find anywhere else. Best Ratings Offering a wide range of industry leading ratings up to 3A for both 690Vac with 00kA interrupting capacity and 000Vdc with 33kA dc interrupting capacity the new CH series is suitable for all manner of applications, compliant to: IEC 6069 IEC 6069 UL 448 UL 4488 Smallest Footprint The CH has been designed with size in mind, dimensions are in accordance to DIN specifications. The Cooper Bussmann CH is up to 0% smaller than the competition allowing better utilisation of valuable panel space. Ease of Use Installation has been made simple thanks to the toolless mounting system along with easy visual identification colour coding. PV (yellow), IEC (red) and UL (black) holders have individual colours making it easy to recognise at a glance. Other features available are optional factoryinstalled neutral pole and blown fuse indication. Accessories Provide Greater Flexibility Save time and money by reducing wiring and components. Advanced combbus bar and PLC communication accessories expand design possibilities while delivering superior performance. For product data sheets, 3

4 Modular Fuse Holder Specifications and Selection Guide Features and Benefits Colour coded for simple visual identification: yellow for PV (000Vdc), red for IEC (690Vac) and black for UL (600Vac) applications. CHPV Models, with 000Vdc rating for use with solar gpv fuse links, are suitable for photovoltaic applications of any size. Tested to a wide range of standards: IEC, culus, CSA, CCC and UR, allowing for use across global applications. World class footprint smaller than any other Modular Fuse Holder, reducing installation space required Toolless DINRail mounting, improves ease of use and reduces installation time and costs. Rated for use with 75ºC or 90ºC wire, fine stranded wire, spade terminals and with combbus bars. Use any higher temperature rated wire with appropriate derating. Specifications Agency Information: IEC 6069 and 6069, UL File E4853, Guide IZLT Listed, IZLT Recognised, CSA File 4735, CHPV and CHM Class 6530, CHCC Class 650, CCC Rated Voltage and Rated Current: See table below Terminal Size: 0.8mm to.mm (#8 to #4) Torque Ratings: 3.4 N m (30 LbIn maximum) Flammability Ratings: UL 94V0, selfextinguishing Storage & Operating Temperature Range: 0ºC to +90ºC (indicating) 0ºC to +0ºC (nonindicating) & Size With Indicator Catalogue Number Without Indicator Rated Voltage & Rated Current Agency Markings Number of Poles Terminal Rating Rated Breaking Capactiy Cooper Bussmann Fuse Links CHM 0x38 and Midget CHMDIU CHMDU CHMDIU CHMDU IEC 6069 UR; CSA; CCC CHM3DIU CHM3DU IEC 690Vac/3A UL 600Vac/30A; 3 CHM4DIU CHM4DU 4 CHMDNIU CHMDNU pole + neutral IEC 6069 CHM3DNIU CHM3DNU 3pole + neutral CHMDI48U N/A IEC 48Vdc/3A UL 48Vdc/30A; IEC 6069; UR; CSA; CCC IEC:.5mm 70 o C PVC/Copper Cable Solid, Stranded, Fine Stranded, Spade Lug, Comb Bus Bar; Single and Dual IEC 0kA rms sym UL 00kA rms sym CCC 00kA rms sym IEC: C0 UL: FNQ, KLM, FNM, KTK, BAF, FWA, PVM, AGU, BAN, FWC. N/A CHMDNXU IEC 690Vac/3A IEC 6069 neutral N/A N/A CHPV Photovoltaic CHPVIU CHPVU IEC 6069 IEC 000Vdc/3A UR; CSA; CCC CHPVIU CHPVU UL 000Vdc/30A; UL kA Solar PV series, PVM, PVxxA0F CHCCDIU CHCCDU CHCC Class CC CHCCDIU CHCCDU UL 600Vac/30A UL; CSA; CCC CHCC3DIU CHCC3DU 3 Cable 75 o C and 90 o C Cu cable 00kA rms sym LPCC, FNQR, KTKR N/A CHCCDI48U UL 48Vdc/30A 4 For product data sheets,

Modular Fuse Holder Features and Installation Guide Features 4mm Lockout Feature in Fuse Carrier Hole for Wire Security Tag Optional Open Fuse

multiple poles together. One JVL kit is sufficient to gang up to 4 poles.

cable or 6mm Bus Bar Connection Toolless DINRail Mounting Wire Strip Length Indicator Dimensional Data mm (in) 8.6 [ 0.73 ] 6.8 [.434 ] 70 [.756 ] 5.

5 Modular Fuse Holder Features and Installation Guide Features 4mm Lockout Feature in Fuse Carrier Hole for Wire Security Tag Optional Open Fuse Indicator Label Slot SelfExtinguishing, UL 94V0 Rated Polyester Material MultiPole Ganging Use multipole connection kit part number JVL to gang multiple poles together. One JVL kit is sufficient to gang up to 4 poles. Captive, Fully Backed Out PhilSlot Screw Spade Lug Connection Toolless Ganging of Multiple Poles Box Lug Cable Terminal to Accept 48AWG Wire, to 5mm cable or 6mm Bus Bar Connection Toolless DINRail Mounting Wire Strip Length Indicator Dimensional Data mm (in) 8.6 [ 0.73 ] 6.8 [.434 ] 70 [.756 ] 5.5 [.067 ] 35 [.378 ] [ ] 73.9 [.909 ] 83. [ 3.75 ] 4.6 [.676 ] 5.8 [.080 ] Removing Instructions. Press down on top of DINRail 9 [ ] 7.5 [ 0.95 ]. Rotate out on the bottom For product data sheets, 5

Product Design and Label Specifications CHPV & CHPVI

689 CHMDNX (IEC Applications) CHMI48 57.8.77 73.88.

88.909 CHCCDI48U 57.8.77 73.88.909 6.8.434 5.83.

6 Product Design and Label Specifications CHPV & CHPVI (PV Applications) CHM & CHMI CHMDNX (IEC Applications) CHMI CHCC & CHCCI (UL Applications) CHCCI CHCCDI48U For product data sheets,

Remote Fuse Monitoring Accessory CHPLC Make it Simple with Cooper Bussmann resettable threephase remote fuse monitor that integrates with a Programmable Logic Controller (PLC) or other monitoring and

Specifications: Power Input: 4Vdc / 5mA Sensing Voltage: 600V/30mA Output Signals: Digital 0Vdc (Low), 4Vdc (High) 0Vdc Low Fuse is good 4Vdc High Fuse has opened When the fuse opens, the output

7 Remote Fuse Monitoring Accessory CHPLC Make it Simple with Cooper Bussmann resettable threephase remote fuse monitor that integrates with a Programmable Logic Controller (PLC) or other monitoring and control equipment. Specifications: Power Input: 4Vdc / 5mA Sensing Voltage: 600V/30mA Output Signals: Digital 0Vdc (Low), 4Vdc (High) 0Vdc Low Fuse is good 4Vdc High Fuse has opened When the fuse opens, the output signal is sent high and will remain high until the unit is reset Rated Impulse Voltage: 8kV Local Indication: Two distinct LEDs indicate unit power (green) and open fuse (red). Upon the replacement of the fuse, the actuation of the reset switch will reset the open fuse LED Flammability Rating: UL 94V0 Wiring: For power, signal and ground connections use 4AWG (0.5mm ) 300V rated wire Electromagnetic Compatibility (EMC) Testing: Electrostatic Discharge Immunity IEC Electrical Fast Transient/Burst Immunity IEC Surge Immunity IEC Packaging: The CHPLC is packaged individually A single unit monitors up to three phases Package includes 0. (.8mm) quick connects for power, signal and ground connections Minimum Circuit Voltage: Minimum circuit voltage required across the CH holder is 00Vac for the remote indication device to operate Installation Technique: Mounts on the left side of the fuse holder and mechanically interlocks with the fuse holder switch handle with hardware provided IP0 Rating: Yes Environmental Data: Storage and Operating Temperature: 0 C to 75 C Agency Information: UL 508 culus to CSA Standard. No.4 PLC Programming: The CHPLC signal line is designed to provide a digital input to a PLC I/O card. Programmable Logic Control program must be written to properly interpret the input signal to the PLC. The PLC program should check for consecutive high signals before taking action on a critical process. Deenergize all circuits before installing or removing any CHPLC devices and follow all prescribed safety procedures. For product data sheets, 7

CombBus Bar Specifications and Selection Guide Features and Benefits Easily distribute power in singlephase or threephase configurations Flexible cuttolength solutions without compromising on the

configuration) Threephase bus bars rated to 600Vac/dc and 00A in endfed configuration (00A for centerfed configuration) Power feed terminals for singlephase and threephase service Specifications

8 CombBus Bar Specifications and Selection Guide Features and Benefits Easily distribute power in singlephase or threephase configurations Flexible cuttolength solutions without compromising on the product s fingersafe features 00kA SCCR (ShortCircuit Current Rating) when protected by a 00A Class J fuse Singlephase bus bars rated to 000Vdc and 00A in endfed configuration (00A for centerfed configuration) Threephase bus bars rated to 600Vac/dc and 00A in endfed configuration (00A for centerfed configuration) Power feed terminals for singlephase and threephase service Specifications Agency Information: UL508, File E95399 Pitch: 7.8mm SCCR: 0kA (default) 00kA (with upstream Class J 00A fuses) Max Current: 00A (power feed from end) 00A (power feed from center) Max Voltage: 600Vac/dc (three phase) 000Vdc/600Vac (single phase) Selection Guide Part Number BBP00M3 BBP00M6 BBP00M9 BBP00M BBP00M5 BBP00M57 BB3P00M6 BB3P00M9 BB3P00M BB3P00M5 BB3P00M57 ECAPP ECAPMP PWR35MM FSCVR PWRPLP PWR50MM Description Singlephase 000Vdc busbar, 00A, 3 pins, assembled endcap Singlephase 000Vdc busbar, 00A, 6 pins, assembled endcap Singlephase 000Vdc busbar, 00A, 9 pins, assembled endcap Singlephase 000Vdc busbar, 00A, pins, assembled endcap Singlephase 000Vdc busbar, 00A, 5 pins, assembled endcap Singlephase 000Vdc cuttable busbar, 00A, 57 pins, without endcap Threephase 600V busbar, 00A, 6 pins, assembled endcap Threephase 600V busbar, 00A, 9 pins, assembled endcap Threephase 600V busbar, 00A, pins, assembled endcap Threephase 600V busbar, 00A, 5 pins, assembled endcap Threephase 600V cuttable busbar, 00A, 57 pins, without endcap Singlephase busbar endcap Threephase busbar endcap 35mm feeder terminal for threephase busbar (5A, 000Vac/dc) Spare contact safety protection covers Singlephase lowprofile feeder terminal (5A, 000Vac/dc) 50mm direct feed terminal (000Vac/dc) 8 For product data sheets,

9 Combbus Bar Features and Installation Guide Typical Installation Example Power Feed Terminals CombBus Bar Modular Fuse Holders Typical Dimensional Data Threephase Singlephase ECAPP ECAPMP FSCVR PWRPLP PWR35MM PWR50MM For product data sheets, 9

CH Modular Fuse Holder Specifications PV UL IEC Class J 30A 4x5 IEC x58 IEC Catalogue Numbers Without Indication With* Indication Size Max Rated Voltage & Rated Current IEC UL CCC Phase Configuration

48Vdc/3A UL 48Vdc/30A * * * * * * pole pole 3pole 4pole pole + Neutral 3 pole + Neutral * pole 3 4 4 mm (84 AWG) 3.

10 CH Modular Fuse Holder Specifications PV UL IEC Class J 30A 4x5 IEC x58 IEC Catalogue Numbers Without Indication With* Indication Size Max Rated Voltage & Rated Current IEC UL CCC Phase Configuration No of mm Modules Wire Range Maximum Torque CHMDU CHMDU CHM3DU CHM4DU CHMDNU CHM3DNU CHMDIU CHMDIU CHM3DIU CHM4DIU CHMDNIU CHM3DNIU CHMDI48U CHM 0x38 and Midget IEC 690Vac/3A UL 600Vac/30A; IEC 48Vdc/3A UL 48Vdc/30A * * * * * * pole pole 3pole 4pole pole + Neutral 3 pole + Neutral * pole mm (84 AWG) 3.4Nm (30LBIn) CHMDNXU IEC 690Vac/3A pole + Neutral CHPVU CHPVU CHPVIU CHPVIU CHPV IEC 000Vdc/3A UL 000Vdc/30A pole pole CHCCDU CHCCDU CHCC3DU CHCCDIU CHCCDIU CHCC3DIU CHCC Class CC UL 600Vac/30A ** ** ** pole pole 3pole 3 mm (84 AWG) 3.4 Nm (30LBIn) CHCCDI48U UL 48Vdc/30A pole CH4B CH4BMS CH4BNX CH4BN CH4B CH43B CH43BMS CH43BN CH43BNMS CH44B CH4BI CH4BNI CH4BI CH43BI CH43BNI CH44BI CH4 4x5 IEC 690Vac/50A UL 600Vac/Vdc 40A (5 Watt) pole pole + Microswitch Neutral pole pole + Neutral pole 3pole 3 pole + Microswitch 3pole + Neutral 3pole + Neutral + Microswitch 4pole mm (46 AWG) 3.0 Nm (30LBIn) CHB CHBMS CHBNX CHBN CHB CH3B CH3BMS CH3BN CH3BNMS CH4B Not available with local neon indication (remote microswitch only) CH x58 IEC 690Vac/5A UL 600Vac/Vdc 00A (9.5 Watt) pole pole + Microswitch Neutral Pole pole + Neutral pole 3pole 3pole + Microswitch 3pole + Neutral 3pole + Neutral + Microswitch 4pole mm (4 AWG) 4.0 Nm (35LBIn) Class J Neon easyid Indication Indication CH30J CH30J CH30J3 CH60J CH60J CH60J3 CH30JI CH30JI CH30J3I CH60JI CH60JI CH60J3I CH30J 30A Class J CH60J 60A Class J UL/CSA 600Vac UL/CSA 600Vac pole pole 3pole pole pole 3pole 50mm (8 AWG) 50mm (8 AWG) 8AWG 4.0 Nm (35LBIn) 08 AWG.7Nm (4LBIn) 8AWG 4.0 Nm (35LBIn) 08 AWG.7Nm (4LBIn) UL Recognised (curus) UL Listed (culus) UL Recognised, Standard 4488, CSA, * UL recognised, CSA, ** UL Listed, CSA For further details see Data Sheets 7048 (CH4), 053 (CH) and 44 (CHJ Class J) * 90V minimum required for illumination *** V minimum required for illumination 0 For product data sheets,

11 Widest Range of Fuse Holders Available Modular Fuse Holders Covers SAMI CUBEFuse Open Block IEC BoltDown CH Inline JTN 600 Panel Mount Optima Knife Blade Class CC and Midget Military For product data sheets,

Customer Assistance Customer Satisfaction Team The Cooper Bussmann Customer Satisfaction Team is available to answer questions regarding Cooper Bussmann products.

12 Customer Assistance Customer Satisfaction Team The Cooper Bussmann Customer Satisfaction Team is available to answer questions regarding Cooper Bussmann products. Europe calls can be made between: Monday Thursday 7.30 a.m p.m. GMT Friday 7.30 a.m p.m. GMT The Customer Service Satisfaction Team can be reached via: Phone: (0) Fax: (0) C 3 Cooper Customer Center The Cooper C 3 portal supports the following Cooper Divisions: Cooper BLine, Cooper Bussmann, Cooper CrouseHinds, Cooper Lighting, Cooper Power Systems, Cooper Safety, and Cooper Wiring Devices. Get started today at by clicking Request User ID and Password. Online Resources Visit for the following resources: Product cross reference Product profiles Online catalogues for the latest United States and European catalogues Application Engineering Application Engineering assistance is available to all customers. The Application Engineering team is staffed by universityqualified electrical engineers who are available with technical and application support. Europe calls can be made between: Monday Thursday 8.30 a.m p.m. GMT Friday 8.30 a.m p.m. GMT Application Engineering can be reached via: Phone: (0) Fax: (0) buletechnical@cooperindustries.com Easy to Navigate Simple to Use RealTime Data 0 Cooper Bussmann (UK) Ltd Melton Road BurtonontheWolds, LE 5TH, United Kingdom P: (0) Your authorised Cooper Bussmann Distributor is Cooper Industries plc 600 Travis, Ste Houston, TX P: Reorder #: MFHBRO03

Compact Modular Fuse Holders With the Industry s Best Ratings Products for PV, IEC and UL Applications

Compact Modular Fuse Holders With the Industry s Best Ratings Products for PV, IEC and UL Applications Protection made simple Compact DIN-Rail Mountable Fuse Holders Cooper Bussmann CH finger-safe modular