13 32 x Fast-acting supplementary fuses x Time-delay supplementary fuses x Fast-acting supplementary fuses

Transcription

1 RED indicates NEW information Supplementary Fuses Section Contents Page Fuse Holder & Block Selection Guide Cable limiters & welder limiters K Series cable limiters V & welder limiters V x Fast-acting supplementary fuses BAF V KTK V KLM Vac/dc x Time-delay supplementary fuses FNM V FNQ V x Fast-acting supplementary fuses BBS V Pin indication fuses and actuator GBA V GLD V MIC V fast-acting MIN V fast-acting FNA V time-delay MIS V KAZ V Limiters ANN V fast-acting ANL Vdc time-delay & 4164-FR fuse blocks Supplementary Fuses In-line size rejecting fuses and fuse holders GLQ V GMQ V In-line non-rejecting fuses and fuse holders GLR V GMF V GRF V Automotive blade-type fuses ATC Vdc ATC-_ID Vdc ATM Vdc ATM-_ID Vdc ATM-LP Vdc MAX Vdc MAX-_ID Vdc Automotive blade-type fuse holders HHC, HHD, HHF, HHG, ATC-FHID for ATC fuses HHL, HHM, ATC-FHID for ATM fuses HHX for MAX fuses PCB fuseclips for ATC/ATM blade, 5mm, 1 4 & 32 diameter fuses

2 Holders & Blocks for Supplementary Fuses Limiters Catalog Number Volts Page K Series V Series V Series V ANN Fast acting limiter Vac/80Vdc ANL Time-delay limiter Vdc Holders CH Series Class J modular 1 to 3-pole, panel/din rail mount..283 Safety J Series modular holders, panel/din rail mount Blocks Modular Type Fuse Blocks 250/600V, panel mount H250 Series 1- to 3-pole 250V, panel mount H600 Series 1- to 3-pole 600V, panel mount Blocks Modular Knifeblade Fuse Blocks 250/600V, panel mount Modular Type Fuse Blocks 600V, panel mount J600 Series, panel mount JP Series pyramid blocks, panel mount BH Series modular-style open blocks, panel mount Limiter Blocks - ANN & ANL Blocks for 4164 & 4164-FR CH Series Safety J Series Modular Type H250 Series Modular Knifeblade H600 Series J600 Series JP Series BH Series 4164 & 4164-FR 32 X Fuses Catalog Number Volts Page BAF V KTK V KLM Vac/dc FNM V FNQ V Holders OPM-NG-SC3 3-pole, panel/din-rail mount OPM-1038R 3-pole, panel/din-rail mount OPM-1038RSW 3-pole w/ switch, panel/din-rail mount CH Series Global 1- to 3-pole, DIN-Rail mount HPG Panel mount fuse holder HPC-D Panel mount fuse holder HPM Panel mount fuse holder HPS Series Panel mount fuse holder HPF Series Panel mount fuse holder HEB Series 1-Pole in-line fuse holder HEX & HEY Series 2-Pole in-line fuse holders NDNF1-WH Fuse holding rail mount terminal block Blocks BM Series, panel/din-rail with adapters , 3742 and 3743 multi-pole add-on fuse blocks HPG OPM-NG-SC3 OPM-1038R & OPM-1038RSW HPC-D CH Series HPS HPF HEB Series HPM HEX & HEY Series NDNF1-WH BM Series 72

3 Holders & Blocks for Supplementary Fuses 32 X Fuses Catalog Numbers Volts Page BBS V Holder HPS-L Panel mount holder Blocks BM Series, panel/din rail with adapters , 3742 and 3743 multi-pole add-on fuse blocks HPS-L BM Series Pin Indicating Fuses 1 4 X Fuse Catalog Numbers Volts Page GBA 1 4" X 1 1 4" V GLD 1 4" X 1 1 4" V MIC 32" X 1 1 2" V MIN 32" X 1 1 2" V FNA 32" X 1 1 2" V MIS 32" X 2" V KAZ 32" X 2" V Holders 1 4" X 1 1 4": HLD Panel mount visual indication " X 1 1 4": HK Series Panel mount lamp indicating Blocks 1 4" X 1 1 4": Series 8000 for visual indication " X 1 1 2": 1-Pole signal block cat. # 3839 (not shown in catalog)* 32" X 2": 1-Pole signal block cat. # 2778 (not shown in catalog)* 32" X 2": 2-Pole signal block cat. # 2837 (not shown in catalog)* 32" X 2": 3-Pole signal block cat. # 2838 (not shown in catalog)* *Call our customer satisfaction team at for more information. HLD HK Series Supplementary Fuses Series 8000 Automotive Blade-type Fuses Catalog Numbers Volts Page ATC Vdc ATM Vdc MAX Vdc Holders ATC: HHC, HHD, HHF, HHG & ATC-FHID In-line holders ATM: HHL, HHM & ATM-FHID In-line holders MAX: HHX In-line holders easyid Illuminating Holders HHC, HHD, HHF & HHG HHL & HHM HHX In-Line Rejecting and Non-Rejecting Fuses Catalog Number Volts Page GLQ rejecting fuse V GMQ rejecting fuse V GLR non-rejecting fuse V GMF non-rejecting fuse V GRF non-rejecting fuse V Holders GLQ & GMQ: HLQ Rejection holder GLR, GMF & GRF: HLR & HLR-2A non-rejection holders HLQ 3 Fuse Holders HLR Fuse Holder For product data sheets, visitwww.cooperbussmann.com/datasheetsele 73

4 Cable Limiters & Welder Limiters K Series Description: Cable limiters. Volts 600Vac IR 200kA RMS 600Vac Agency Information: UL Listing: KDM, KDR, KDP and KFM, KCM, KCM-B and KCR. Sizes and ratings available to meet many applications. Protecting low voltage distribution and service entrance cables against short-circuit currents. Catalog Numbers Copper Cable Limiter 600 Volts Catalog Cable Catalog Cable Number Size Number Size Tubular Terminals KCY #4 KCF 4/0 KCZ #3 KCH 250 MCM KCA #2 KCJ 1, MCM KCB #1 KCM 1, 2, 3, KCM-B MCM KCC 1/0 KCV 600 MCM KCD 1, 2 2/0 KCR 1, MCM KCE 3/0 KCS 1000 MCM Tubular Terminal and Offset Bolt-Type Terminal KQV #12 KDD 1 2/0 KQT #10 KDE 3/0 KFZ #8 KDF 4/0 KIG #6 KDH 250 MCM KDY #4 KDJ 1, MCM KDA #2 KDM 1, 2, MCM KDB #1 KDU 600 MCM KDC 1/0 KDR 1, MCM & Series Description: Welder limiters. Volts 600Vac (or less) IR 200kA RMS Sym. Current-limiting devices designed specially for use on welder circuits only Time-current characteristics are designed to hold on the intermittent overloading encountered in welder operation, while providing short-circuit protection to the circuit and equipment Welder limiters have excess current capacity in the operating range as needed for this type of service Welder circuits Because welder limiters have special characteristics, they are not intended for application on general-use circuits Catalog Numbers Catalog Fuse Holder Nominal Numbers Type Amp Rating Class H Class H Class J Class J 300 Compression Connector Rod and Tubular Terminals KEX 4/0 KQO 350 MCM KFH-A 250 MCM KDT MCM *Center Bolt-Type Terminal and Off-Set Bolt-Type Terminal KPF 4/0 KDP MCM KFT MCM KFM MCM KEW MCM *Copper or aluminum cable; sizes of all other limiters pertain to copper only. KFM copper only. 1 UL Listed (File E90818). 2 Available with shrink tube _V suffix. 3 Available with molded rubber boots. Add B to end of part number. Accessories Boots can be purchased separately. For KCM BOOT-KCM For KDM BOOT-KDM Installation tools can be purchased separately from Thomas and Betts Crimp Tool: TBM-14M Die: KDM/15515 KDR Data Sheet: 1042 Data Sheet: 1045 Recommended Fuse Blocks For & Series limiters See page 72 74

5 32 x Fast-acting Fuses BAF KTK KLM Description: Fast-acting supplementary fuse. Dimensions: 32 x (10.3 x 38.1mm). Volts 250Vac (or less) Amps A IR 125Vac ( A) 35A ( 2 250Vac) 100A ( Vac) 200A 250Vac) 750A (12A- 250Vac) 200A 250Vac) Agency Information: CE, Std , UL 0-15/250V, Guide JDYX, File E19180 CSA Certified, 0-15/250V, Class , File Low cost supplemental protection of 125V and 250V non-inductive circuits. Upgrade with LP-CC product to reduce SKU investment and minimize potential arc-flash hazards. (and minimize potential for misapplying fuse.) General Purpose Circuits Lighting Circuit Protection Meter Circuits BAF- 1 4 BAF BAF-9 BAF- 1 2 BAF-3 BAF-10 BAF BAF-4 BAF-12 BAF BAF-5 BAF-15 BAF-1 BAF-6 BAF-20 BAF BAF BAF-25 BAF BAF-7 BAF-30 BAF-2 BAF-8 Description: Fastacting supplementary fuse. Dimensions: 32 x (10.3 x 38.1mm). Volts 600Vac (or less) Amps A IR 100kA RMS Sym. (UL) Agency Information: CE, Std , UL Listed, Guide JDYX, File E Low cost supplemental protection of 600V or less non-inductive circuits. Upgrade with LP-CC product to reduce SKU investment and minimize potential arc flash hazards. Control Circuits Lighting Circuit Protection Meter Circuits 600Vac - UL Listed and CSA KTK KTK- 3 4 KTK-4 KTK-12 KTK-50* KTK- 1 8 KTK-1 KTK-5 KTK-15 KTK KTK KTK-6 KTK-20 KTK- 1 4 KTK KTK-7 KTK-25 KTK KTK-2 KTK KTK-30 KTK KTK KTK-8 KTK-35* KTK- 1 2 KTK-3 KTK-9 KTK-40* KTK KTK KTK-10 KTK-45* *Rated for no more than 24A continuous. Description: Full range, fast-acting, DC midget fuse. Dimensions: 32 x (10.3 X 38.1mm). Volts 600Vac/dc Amps A IR 100kA AC 50kA DC Agency Information: CE, UL Listed: STD , (FILE #E19180), CSA Certified, C22.2 NO (CLASS # , FILE #53787). Full range, fast-acting, 600Vac/dc midget fuse. Minimum interrupting rating or 200% rated current at 600Vdc. DC Control Circuits Requiring Fast-Acting Fuses. Solar power energy sources - use the Bussmann PVM fuse for DC ratings up to 600Vdc. - KLM KLM KLM- 3 4 KLM-5 KLM-20 KLM- 1 8 KLM-1 KLM-6 KLM-25 KLM KLM KLM-8 KLM-30 KLM- 1 4 KLM-2 KLM-10 KLM KLM-3 KLM-12 KLM- 1 2 KLM-4 KLM-15 Supplementary Fuses *All have interrupting rating of 10,000A at 125V. For superior electrical protection, Bussmann recommends upgrading BAF and fuse applications to Low-Peak LP-CC fuses See page 23. Data Sheet: 2011 (0-30) For superior electrical protection, Bussmann recommends upgrading KTK fuse applications to Low-Peak LP-CC fuses See page 23. Data Sheet: 1011 Data Sheet: 2020 Recommended fuse blocks/fuse holders for 32 x fuses See page 72 75

6 32 x Time-delay Fuses FNM Description: Time-delay supplementary fuse. Dimensions: 32 x (10.3 x 38.1mm). Volts 250Vac (or less) Amps A IR 35A ( 1 250Vac) 100A ( Vac) 200A 250Vac) 10kA ( 1 125Vac) 10kA 250Vac) Agency Information: CE, Std , UL Listed, 0-30/250Vac; File E19180, Guide JDYX, CSA Certified, 1-30/250Vac; Class , File Low cost supplemental protection of 125V and 250V inductive circuits. General Purpose Circuits Lighting Circuit Protection Meter Circuits Upgrading to LP-CC product will reduce SKU investment and minimize potential for misapplying fuse FNM FNM- 1 2 FNM FNM-3 FNM-6 FNM-15 FNQ Description: Time-delay supplementary fuse. Dimensions: 32 x (10.3 x 38.1mm). Volts 500Vac (or less) Amps A IR 10kA RMS Sym. Agency Information: CE, Std , UL Listed, Guide JDYX, File E19180 CSA Certified, Class , File Low cost supplemental protection of transformers and relays at 500V or less. Control Transformer 480V Primary Protection Lighting Circuit Protection Meter Circuits FNQ FNQ FNQ FNQ FNQ-7 FNQ-20 FNQ- 1 8 FNQ- 1 2 FNQ FNQ-4 FNQ-8 FNQ-25 FNQ FNQ FNQ-2 FNQ FNQ-9 FNQ-30 FNQ FNQ FNQ FNQ-5 FNQ-10 FNQ FNQ-1 FNQ FNQ FNQ-12 FNQ- 1 4 FNQ FNQ-3 FNQ-6 FNQ-14 FNQ FNQ FNQ FNQ FNQ-15 FNM- 1 8 FNM FNM FNM FNM FNM-20 FNM FNM- 3 4 FNM FNM FNM-7 FNM-25 FNM FNM-1 FNM-2 FNM-4 FNM-8 FNM-30 FNM- 1 4 FNM FNM FNM FNM-9 FNM FNM FNM FNM-5 FNM-10 FNM FNM FNM FNM FNM-12 For superior electrical protection, Bussmann recommends upgrading FNM and FNQ fuse applications to Low-Peak LP-CC fuses See page 23. Recommended fuse blocks and fuse holders for 32 x fuses See page 72 For superior electrical protection, Bussmann recommends upgrading FNM and FNQ fuse applications to Low-Peak LP-CC fuses See page 23. Recommended fuse blocks and fuse holders for 32 x fuses See page 72 Data Sheet: 2028 Data Sheet:

7 32 x Fast-acting Fuses BBS Description: Fast-acting supplementary fuse. Dimensions: 32 x (10.3 x 34.9mm). Construction: Fiber cartridge. Volts 600Vac ( A) 250Vac (6-10A) 48Vac (12-30A) Amps A IR 10kA RMS Sym. Agency Information: CE, Std , UL Listed, 0-5A/600V, Guide JDYX, File E19180, CSA Certified, 0-5A/600V, Class , File Supplementary Fuses Low cost supplemental protection of non-inductive circuits Reduced interchangeability with other supplemental fuses minimizes misapplication Control Circuits Lighting Ballasts Meter Circuits BBS BBS BBS-4 BBS-15 BBS BBS-1 BBS-5 BBS-20 BBS- 1 4 BBS BBS-6 BBS-25 BBS BBS BBS-7 BBS-30 BBS- 1 2 BBS BBS-8 BBS BBS-2 BBS-10 BBS- 3 4 BBS-3 BBS-12 Recommended fuse blocks/fuse holders for 32 x fuses Page 73 Data Sheet: 2010 (0-30A) 77

8 Pin Indication Fuses GBA GLD Description: Fast-acting, pin indication fuse. Dimensions: 1 4 x (6.6 x 31.7mm) 3AG. Volts See Agency Info below Amps A IR See Agency Info below Agency Information: CE, Std , UL Listed, 0-5A/125Vac, 10,000 AIC, Guide JDYX, File E19180, UL Recognized, 6A/125Vac, 1000AIC 8-15A/50Vac/dc, 300 AIC Guide JDYX2, File E19180, CSA Certified: 0-5A/125Vac, 10,000 AIC Class , File Type GBA has a red pin indicator providing visual identification of failed circuits, resulting in faster troubleshooting (reduced circuit downtime). Type GLD has a plated pin to activate transmitting a electrical signal to indicate the location of opened circuits, resulting in reduced downtime. Control Circuits Electronic Circuits GLD GLD- 1 2 GLD-2 GLD-6 GLD- 3 4 GLD-3 GLD-10 GLD-1 GLD-4 GLD-12 GLD GLD-5 GLD-15 GBA GBA- 1 2 GBA-2 GBA-8 GBA- 3 4 GBA-3 GBA-10 GBA-1 GBA-4 GBA-15 GBA GBA-5 MIC & MIN Description: Fastacting, pin indication fuse. Dimensions: 32 x (10.3 x 38.1mm) 5AG. Volts 250Vac (1-15A) 32Vac (20-30A) Amps 1-30A IR 35A 100A 200A 750A 10kA 35A Agency Information: CE, Std , MIC 0-15A UL Listed, 125Vac/10kA IR Guide JDYX, File E19180, MIN 1-5A CSA Certified, Class , File Type MIN has a red pin indicator providing visual identification of failed circuits, resulting in faster trouble shooting (reduced circuit downtime). Type MIC has silver-plated pin transmitting an electrical signal indicating location of a failed circuit, resulting in faster troubleshooting (reduced circuit downtime). Control Circuits PLC Circuits Electronic Circuits MIC MIC-1 MIC-5 MIC-20 MIC-2 MIC-10 MIC-25 MIC-3 MIC-15 MIC-30 MIN MIN-1 MIN-5 MIN-20 MIN-2 MIN-10 MIN-25 MIN-3 MIN-15 MIN-30 FNA Description: Time-delay, pin indication fuse. Dimensions: 32 x (10.3 x 38.1mm). Volts 250Vac ( A) 125Vac (1-15A) 32Vac (20-30A) Amps A IR 35A ( Vac) 10kA ( 1 125Vac) 1kA 32V) Agency Information: CE, Std , UL Listed A, IR 35A@ 250V, IR 10kA@ 125V, 1-15A, IR 10kA@ 125V, Guide JDYX, File 19180, CSA Certified, A/250V, 1-10A/125V, Class , File FNA has a pin indicator providing visual identification of failed circuits, resulting in reduced circuit downtime. Time-delay response allows close sizing on control transformers and relays Control Circuits Electronic Circuits FNA FNA FNA FNA FNA- 1 8 FNA-1 FNA FNA-7 FNA FNA FNA-3 FNA-8 FNA FNA FNA FNA-9 FNA- 1 4 FNA FNA FNA-10 FNA FNA FNA-4 FNA-12* FNA FNA FNA FNA-15* FNA- 1 2 FNA FNA-5 FNA-20* FNA FNA-2 FNA FNA-25* FNA- 3 4 FNA FNA-6 FNA-30 *12-30A versions are dual-tube construction Recommended fuse blocks/fuse Recommended signal block for holders for 1 4 x indicating fuses 32 x indicating fuses Page 73 Page 73 Data Sheet: 2012 Data Sheet: 2047 Recommended signal block for 32 x indicating fuses Page 73 Data Sheet:

9 Pin Indication Fuse and Actuator, and Limiters ANN & ANL Limiters Description: Circuit limiters. ANN: Very fast-acting limiter. ANL: Non-time delay limiter. Dimensions: 7 8 x (22.2 x 81.0mm). ANN: Volts 125Vac 80Vdc Amps A IR 125Vac 80Vdc ANL: Volts 80Vdc Amps A IR 80Vdc Agency Information: ANN: 125Vac, IR=2500A and 80Vdc, IR=2700A: UL Recognized Guide JFHR2, File E56412; CSA Certified Class , File 53787, CE for A. ANL: UL Recognized, CSA Certified, 80Vdc, IR = 2700A, Guide JFHR2, File E56412, Class , File 53787, SAE J1171. Fast-acting circuit protection (ANN). Time-delay sizing for inductive circuits (ANL). Window shows limiter status. Fork lifts, Marine, Aviation ANN ANN-10 ANN-90 ANN-225 ANN-400 ANN-35 ANN-100 ANN-250 ANN-500 ANN-40 ANN-125 ANN-275 ANN-600 ANN-50 ANN-150 ANN-300 ANN-700 ANN-60 ANN-175 ANN-325 ANN-800 ANN-80 ANN-200 ANN-350 ANL ANL-35 ANL-125 ANL-250 ANL-500 ANL-40 ANL-0 ANL-275 ANL-600 ANL-50 ANL-150 ANL-300 ANL-675 ANL-60 ANL-175 ANL-325 ANL-750 ANL-80 ANL-200 ANL-350 ANL-100 ANL-225 ANL-400 MIS Description: Non timedelay pin indication fuse. Dimensions: 32 x 2 (10.3 x 50.8mm). Volts 600Vac Amps 1-12A IR 200kA Type MIS has a pin indicator providing visual identification of failed circuits, resulting in faster troubleshooting (reduced circuit downtime). Type MIS can be used in circuits rated 600V or less. Type MIS has an interrupting rating of 200kA. 480V Control Circuits PLC Circuits MIS-1 MIS-4 MIS-10 MIS-2 MIS-5 MIS-12 MIS-3 MIS-8 Test Fuse Load Opening Time All 110% 0 4 hrs. (min.) 1-5A 150% 0 6 min. (max.) 6-12A 150% 12 min. (max.) Recommended signal block for 32 x 2 indicating fuses Page & 4164-FR Limiter Blocks Description: Limiter fuse blocks for ANL & ANN furnished with nylon inserted locknuts 4164-FR furnished with standard hex nuts Dimensions: Length: 3.38 Width: 0.95 Height: 1.62 Studs center to center: 2.43 KAZ Description: Non-fuse actuator. Dimensions: 32 x 2 (10.3 x 50.8mm). Volts 600Vac Amps N/A IR 200kA Agency Information: CE, UL Listed, Guide JDVS, File E Bussmann signal blocks 2778, 2837 or 2838 with KAZ actuators mounted in parallel with fuses having a rating of 50A or larger to provide blown fuse dropout of shunt-trip fused switches. Type KAZ can be used in circuits rated 600V or less. Type KAZ has an interrupting rating of 200kA. Large, Shunt-Trip Fused Switches Fuse Protected Circuits Rated 50A or Larger With Shunt-Trip Devices. Catalog Number: KAZ Recommended signal block for 32 x 2 indicating fuses Page 73 Data Sheet: 2021 Volts 125Vac 80Vdc 32Vdc (Self Certified) Amps A Poles: 1 - stud terminal Supplementary Fuses Data Sheets: 2023 (ANN), 2024 (ANL) Data Sheet: 23 79

10 In-line Size Rejecting Fuses and Fuse Holders GLQ Description: Fast-acting, size-rejecting in-line fuse. Construction: Glass tube. Volts 300Vac (or less) Amps 1-10A IR 10kA Agency Information: CE, Std , UL Listed (Guide JDYX, File E19180), CSA Certified, (Class , File 53787). In-Line, fast-acting circuit protection. Rejection feature prevents overfusing. In-line Lighting Ballast Protection and Rejection Holders Fuse Holder 1, 2 Fuse Holder 1, 2 GLQ-1 HLQ GLQ-3 HLQ GLQ HLQ GLQ-4 HLQ-5 GLQ HLQ GLQ-5 HLQ-5 GLQ-2 HLQ GLQ-9 HLQ-10 GLQ HLQ GLQ-10 HLQ-10 1) Carrier is UL Recognized, Guide IZLT2, File E14853 and CSA Certified, Class , File A, 300Vac. 2) Units can be panel-mounted either in a knockout hole with a separate steel clip (BK/A-104) or in a keyhole punch using separate mounting clip #6374 for panels of thickness to or #4909 for thickness to Do not put tension on line (rear) terminal of fuse holder. GMQ Description: Time-delay, size-rejecting in-line fuse. Construction: Ceramic tube. Volts 300Vac (or less) Amps A IR 10kA Agency Information: CE, Std , UL Listed (Guide JDYX, File E19180), CSA Certified, (Class , File 53787) In-line, fast-acting circuit protection. Rejection feature prevents overfusing. In-Line Lighting Ballast Protection and Rejection Holders Fuse Holders 1, 2 Fuse Holders 3, 4 GMQ- 1 2 HLQ- 1 2 GMQ HLQ GMQ HLQ GMQ-3 HLQ GMQ HLQ GMQ HLQ GMQ-1 HLQ GMQ-4 HLQ-5 GMQ HLQ GMQ-6 HLQ-8 GMQ HLQ GMQ GMQ-2 HLQ ) Carrier is UL Recognized, Guide IZLT2, File E14853 and CSA Certified, Class , File A, 300Vac. 2) Units can be panel-mounted either in a knockout hole with a separate steel clip (BK/A-104) or in a keyhole punch using separate mounting clip #6374 for panels of thickness to or #4909 for thickness to Do not put tension on line (rear) terminal of fuse holder. Data Sheet: 2033 Data Sheet: 2030 HLQ 3 Fuse Holders for both GLQ & GMQ fuses. 80

11 In-line Non-rejecting Fuses and Fuse Holders GLR Description: Fast-acting, non-rejection, in-line fuse. Construction: Glass tube. Volts 300Vac (or less) Amps A IR 10kA Agency Information: CE, Std , UL Listed, 0-15A/300Vac (Guide JDYX, File E19180), CSA Certified, 0-10A/300V (Class , File 53787). In-line, fast-acting circuit protection. In-Line Lighting Ballast Protection and Non-Rejection Holders Fuse Holder 1, 2* Fuse Holder1, 2* GLR- 1 2 HLR GLR-6 HLR GLR-1 HLR GLR-7 HLR GLR HLR GLR-8 HLR GLR HLR GLR-9 HLR GLR-2 HLR GLR-10 HLR GLR-3 HLR GLR-12 HLR GLR-4 HLR GLR-15 HLR-2A GLR-5 HLR 1) Carrier is UL Recognized, Guide IZLT2, File E14853 and CSA Certified, Class , File A, 300Vac. 2) Units can be panel-mounted either in a knockout hole with a separate steel clip (BK/A-104) or in a keyhole punch using separate mounting clip #6374 for panels of thickness to or #4909 for thickness to * For two leads (one each for line and loadside) order HLR-2A, 15A, 300V An alternative to the HLR fuse holder is the A fuse holder. The A fuse holder comes WITHOUT leads. The customer inserts #18 insulated solid copper wire into the line side receptacle as well as into the load side receptacle. It has the same body dimensions, utilizes the same mounting hole, and takes the same mounting clips as the HLR. The A fuse holder is UL Recognized, 10A, 300Vac, Guide IZLT2, File E14853 and CSA Certified, 10A, 300Vac, Class , File Do not put tension on line (rear) terminal of fuse holder. GMF GRF Description: Time-delay, non-rejection, in-line fuse. Construction: Glass tube. Volts 300Vac (or less) Amps A IR 10kA Agency Information: CE, Std A, UL Listed (Guide JDYX, File E19180), CSA Certified, (Class , File 53787). In-line, time-delay circuits protection. In-Line Lighting Ballast Protection Catalog Numbers (-Amps) and Non-Rejection Holders Fuse Holder 1, 2* Fuse Holder1, 2* GMF HLR GMF-3 HLR GMF- 1 2 HLR GMF HLR GMF HLR GMF-4 HLR GMF HLR GMF-5 HLR GMF-1 HLR GMF HLR GMF HLR GMF-10 HLR GMF HLR GRF-7 HLR GMF-2 HLR GRF-8 HLR GMF HLR GRF-10 HLR GMF HLR 1) Carrier is UL Recognized, Guide IZLT2, File E14853 and CSA Certified, Class , File A, 300Vac. 2) Units can be panel-mounted either in a knockout hole with a separate steel clip (BK/A-104) or in a keyhole punch using separate mounting clip #6374 for panels of thickness to or #4909 for thickness to *For two leads order HLR-2A, 15A, 300V An alternative to the HLR fuse holder is the A fuse holder. The A fuse holder comes WITHOUT leads. The customer inserts #18 insulated solid copper wire into the line side receptacle as well as into the load side receptacle. It has the same body dimensions, utilizes the same mounting hole, and takes the same mounting clips as the HLR. The A fuse holder is UL Recognized, 10A, 300Vac, Guide IZLT2, File E14853 and CSA Certified, 10A, 300Vac, Class , File Do not put tension on line (rear) terminal of fuse holder. Supplementary Fuses Data Sheet: 2032 Data Sheet: 2031 HLR-2A Fuse Holder HLR Fuse Holder 81

12 Automotive Blade-type Fuses & Holders ATC Fuse HHC, HHD, HHF, HHG & ATC-FHID ATM Fuse (Actual Size) Description: Fast-acting blade fuse. Construction: Colored plastic housing with zinc fuse element. Volts 32Vdc Amps 1-40A IR 1000A Agency Information: UL Recognized, (3-40A) (Guide JFHR2, File E56412), SAE Standard J1284. Color coded plastic housing for easy identification of fuse ratings Automotive Non-Indicating *Indicating Color ATC-1 ATC-2 Black Gray ATC-3 ATC-3ID Violet ATC-4 Available With Indication Pink ATC-5 ATC-5ID Tan ATC-7-1/2 ATC-7-1/2ID Brown ATC-10 ATC-10ID Red ATC-15 ATC-15ID Blue ATC-20 ATC-20ID Yellow ATC-25 ATC-25ID Clear ATC-30 ATC-30ID Green ATC-35 ATC-35ID Blue-Green ATC-40 ATC-40ID Orange *Call Bussmann Customer Satisfaction for ordering information. Description: In-line fuse holders for ATC Blade-Type fuses. Dimensions: See Dimensions illustration. Volts: 32Vdc Amps: 80% continuous of fuse rating. See Catalog Numbers table for individual fuses sizes. 0.38" 0.30" 0.25" 0.78" 0.91" 0.5" 0.364" LED Indicator easy ID LED Indicating Holder Catalog Numbers Catalog Fuse Holder Fuse Electrical Numbers Description Amps Connection HHC Yellow 1-20 #16 black leadwire HHD Black 1-30 #12 yellow leadwire HHF Black w/ cover 1-20 #16 yellow leadwire HHG Black w/ cover 1-30 #12 yellow leadwire ATC-FHID Indicating Holder Black w/ cover 1-20 #16 black leadwire A fuse must be properly and fully inserted into the holder to provide a solid connection. Poor or improper insertion of the fuse can result in failure of the fuse and holder, thus not protecting the device for which it was intended. HHC & HHD Dimensions - in 4.0" " 1.125" 4.0" " ATM (Actual Size) Available With Indication Description: Fast-acting blade fuse. Construction: Colored plastic housing with zinc fuse element. Volts 32Vdc Amps 2-30A IR 1000A Color coded plastic housing for easy identification of fuse ratings Automotive ATM-LP Non-Indicating *Indicating Low-Profile Color ATM-2 Gray ATM-3 ATM-3ID Violet ATM-4 Pink ATM-5 ATM-5ID ATM-5LP Tan ATM-7-1 /2 ATM-7-1 /2ID ATM-7-1 /2LP Brown ATM-10 ATM-10ID ATM-10LP Red ATM-15 ATM-15ID ATM-15LP Blue ATM-20 ATM-20ID ATM-20LP Yellow ATM-25 ATM-25ID ATM-25LP Clear ATM-30 ATM-30ID ATM-30LP Green *Call Bussmann Customer Satisfaction for ordering information. Data Sheet: 2009 Data Sheet: 2107 Data Sheet:

13 Automotive Blade-type Fuses & Holders HHL, HHM & ATM-FHID MAX Maxi Fuse HHX Description: In-line fuse holders for ATM Fuses. Volts: 32Vdc Amps: 80% continuous of fuse rating. See Catalog Numbers table for individual fuses sizes. Catalog Numbers Catalog Fuse Holder Fuse Electrical Numbers Description Amps Connection HHL Black w/ cover 2-20 #16 black leadwire, 4 length stripped to 1 /4 HHM Black w/ cover 2-30 #12 red leadwire, 4 length stripped to 1 /4 ATM-FHID Indicating Holder 2-20 #16 black leadwire Black w/ cover A fuse must be properly and fully inserted into the holder to provide a solid connection. Poor or improper insertion of the fuse can result in failure of the fuse and holder, thus not protecting the device for which it was intended. HHL & HHM Dimensions - in.25" easy ID LED Indicating Holder 1.56" 4.75" 4.75".25" LED Indicator.59".41" Available With Indication (Actual Size) Description: Fast-acting blade fuse. Construction: Colored plastic housing with zinc fuse element. Volts 32Vdc Amps 20-80A (non-indicating) A (indicating) IR 1000A Color coded plastic housing for easy identification of fuse ratings Automotive Non-Indicating *Indicating Color MAX-20 MAX-20ID Yellow MAX-25 Gray MAX-30 MAX-30ID Green MAX-35 Brown MAX-40 MAX-40ID Orange MAX-50 MAX-50ID Red MAX-60 MAX-60ID Blue MAX-70 MAX-70ID Tan MAX-80 MAX-80ID Clear MAX-100ID Purple *Call Bussmann Customer Satisfaction for ordering information. Description: In-line fuse holders for MAXI Fuses. Volts: 32Vdc Amps: 80% continuous of fuse rating. See Catalog Numbers table for individual fuses sizes. Catalog Numbers Catalog Fuse Holder Fuse Electrical Numbers Description Amps Connection HHX Black w/ cover #6 red leadwire, 5 with blunt ends A fuse must be properly and fully inserted into the holder to provide a solid connection. Poor or improper insertion of the fuse can result in failure of the fuse and holder, thus not protecting the device for which it was intended. Dimensions - in 3.35" 6.70" 6.70".265" DIA. HOLE 1.37" Supplementary Fuses Recommended in-line fuse holder for blade type fuses Page 83 Data Sheet: 2128 Data Sheet: 2049 Data Sheet:

14 Automotive Blade-type PCB Fuseclips ATM Fuses 1A5778 Series Dimensional Data ATC Fuses (0 to 20 Amps) 1A5600 Series Dimensional Data " (7.49mm).330" (8.38mm).150" (3.81mm).053" (1.35mm).200" (5.08mm) Data Sheet: " ± 0.01" (2.03 ± 0.25mm).090" (2.29mm) Catalog Clip Number Mat.* Finish 1A5600 Cart. Satin Brass Finish Tin A5780 Series Dimensional Data ± 0.05 DIA. HOLE ± (TYP-4) MOUNTING LAYOUT FOR 2 CLIPS BASE FUSECLIPS MATERIAL: BRASS, NICKEL PLATED, 0.30 THICK Data Sheet: A5779 Series BASE FUSECLIPS 2.54 ± 0.05 DIA. HOLE ± (TYP-4) MOUNTING LAYOUT SPECIFICATIONS FUSECLIPS BRASS, NICKEL PLATED BASE MATERIAL..... GLASS FILLED NYLON, UL RATED 94V-0 CURRENT RATING AMPS VOLTAGE RATING V AC TEMPERATURE RATING.. -50ºC TO 145ºC -58ºF 292ºF *Spg. Br. - Spring Bronze; BeCu - Beryllium Copper; Cart. Brass - Cartridge Brass ± 0.05 DIA. HOLE ± (TYP-4) MOUNTING LAYOUT SPECIFICATIONS FUSECLIPS BASE MATERIAL..... CURRENT RATING..... VOLTAGE RATING ºC TEMPERATURE RATING.. -58ºF BRASS, NICKEL PLATED GLASS FILLED NYLON, UL RATED 94V-0 15 AMPS 500V AC 145ºC TO 292ºF ***For RoHS compliant version add -R option code suffix to part number. Data Sheet: 21 Data Sheet: 21 84