Motor Valve compact 8230

Transcription

1 Motor Valve compact 8230 GS 3 series 1/2 up to 2 Motor valve for control and switching of neutral through to highly aggressive media in process engineering, chemical industries and for plant equipment. Space saving wafer type construction Lowest possible weight Low operation noise level (quiet operation) Self adaption Operating pressures up to 580 psi Control of high differential pressures with small actuators Available also with spring return Technical Information Valve Design ANSI flange wafer (self-aligning) Nominal size 1/2" up to 2" Nominal pressure acc. DIN psi (fits also to psi) for flanges with facing type B Nominal pressure acc. ANSI ANSI 150 for flanges acc. ASME B16.5 RF ANSI 300 Nominal pressure acc. JIS 10K for "raiced face" flanges 20K 1/2" - 1 1/2" Media temperature Carbon steel body 14 F up to +572 F Stainless steel body -76 F up to +662 F Leakage Carbon, FUY SFC STN 2 (% of Cv) < 0,0001 < 0,0005 < 0,001 Cv-values see data sheet 8001 Technical Information Motor Actuators Type of motor BM24C BM24C/I BM24C/IOS2 BM250C/IO2 BM24 BM115 BM230 Function Control Control Control Control On/Off On/Off On/Off Nominal voltage 24 V AC/DC 24 V AC/DC 20-30V AC V AC 20-45V DC V DC 24 V AC/DC 115 V AC 230 V AC Set point 2-10 V 4-20 ma 4-20 ma 4-20 ma 3-step 3-step 3-step Load 100 kohm 500 Ohm 500 Ohm 500 Ohm - - Position feedback 2-10 V 2-10 V 4-20 ma 4-20 ma - - external load - - < 700 Ohm < 700 Ohm - - limit switches x 2 x - - max. switching load V AC/DC 24V AC/DC 70mA 70mA - - Power consumption 3 W 3 W 3 W 4 W 3 W 6 W 6 W Stroking time (standard) 3.5s per 3.5s per 3.5s per 3.5s per 0.04inch 0.04inch 0.04inch 0.04inch 190 s/inch 190 s/inch 190 s/inch Thrust Class of protection Ambient temperature 800 N IP F up to +140 F Schubert & Salzer Inc., 4601 Corporate Drive N.W., Suite 100 Concord, NC 28027, Ph.: (704) , Fax: (704) info@schubertsalzerinc.com,

2 180 lbf. actuator Position electronics (self adapting) Quick coupling PTFE-packing (self-adjusting) Valve stem, roller burnished Fixed valve plate Moving disc Wafer-type design Admissible Pressures p max [psi] Nominal size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" Unit carbon/sfc-stainless steel STN2 Unit Materials Body Carbon steel ASTM A572, A216 Stainless steel 316Ti /318 Head section Carbon steel ASTM A572, A216 Stainless steel 316Ti /318 Packing PTFE, carbon filled (spring SST 301) Valve stem Stainless steel 316Ti, roller burnished Bellows Stainless steel 316Ti Fixed plate Stainless steel 316Ti, STN2-disc Sliding disc Coupling ring for disc plated Standard: special carbon material Stainless steel 316Nb SFC-disc STN2-disc Motor Stroking Times Stroking times for control actuators in sec. Setting 1/2" - 1 1/2" 2" 44 s / inch s / inch 22* 29* 178 s / inch s / inch Stroking times for on/off-actuators in sec. Setting 1/2" - 1 1/2" 2" 190 s / inch 47* 62* 114 s / inch *Standard

3 Ordering Number System / V K M M Z S 1-6 : Please quote all 6 sections. 7-16: Quote only if required. Symbol: "V": Valve Type Size "R": Repair kit (sealings) 1. Motor design 2. Function 3. Connection 4. Body material 5. Safety position 6. Motor 7. Special versions 8. Stem sealing K compact M motor control E GS3 0 carbon steel - without 0 control actuator BM250C IOS2 85- M to state if some of - PTFE-packing actuator valve type flangeless ASTM A572 safety 250V AC/ V DC control sections 8-15 are self-adjusting 8230 design acc. ASTM A216 position electronics 4-20 ma, feedback quoted (standard) ANSI ma, 2 limit switches F GS3 1 stainless steel 0 spring closes 1 control actuator BM24C - 24V 1 stainless steel flangeless 316Ti or 318 AC/DC, control electronics 2-10 V, bellow 316Ti design acc. feedback 2-10 V ANSI control actuator BM24C/I - 24V G GS3 AC/DC, control elec- tronics 4-20 flangeless ma, feedback 2-10 V design acc. 6 on-off actuator BM24 24 V AC/DC DIN, 7 on-off actuator BM V AC psi 8 on-off actuator BM V AC 9 control actuator BM24C IOS V AC/20-45V DC control electronics 4-20 ma feedback 4-20 ma, 2 limit switches 9. Moving disc 10. Fixed disc 11. Cv-values 12. Flow characteristic 13. Accessories 14. Set point signal 15. Stroking times 16. Special versions - carbon - stainless - 100% (stand.) - linear Z accessories - standard - standard: material steel/ A red. to 63% 1 equal (pos.14 ff.) 2-10V or 4-20 ma control actuators: 9 STN2/STN3 Stellite 1 red. to 40% percentage signal opens 3.5 s/0.04 inch S SFC 1 STN2-plate B red. to 25% On-off actuators: (only in 2 red. to 16% 190 s / inch combination C red. to 10% L 4.5 s/0.04"on/offwith pos."9") 3 red. to 6,3% actuators only 3 STN3-plate 4 red. to 2,5% s/0.04" contr. (only in 5 red. to 1% actuators only combination 6 red. to 20% 2 7.0s/0.04" contr. with pos."9") 7 red. to 12% actuators only 8 red. to 2% s/0.04" contr. 9 red. to 0.4% actuators only Ordering example 8230/050VKME103 GS-Motor Valve compact type 8230, 2, flangeless design ANSI 150, stainless steel body, spring closes, control actuator BM24C/IOS, 24V AC/DC, control electronics 4-20 ma, stroke feedback 4-20 ma, 2 limit switches, linear characteristic, Cv-value 100 %

4 Dimensions and Weights A C L Size A C L Stroke Weight lbs 1/2" /4" " /4" /2" " Dimensions in inch

5 Schematic Wiring Diagrams On/Off-Actuators Actuator: BM24 24V AC/DC 3-step drive AC 24V DC 24V Actuator: BM230, BM V 50/60 Hz 115V 50/60 Hz 3-step drive AC 230V N L Y1 Y Y1 Y2 Control Actuators Actuator: BM250C/IOS2, BM230C/IOS2-R V AC V DC input signal 4-20mA feedback signal 4-20mA 2 limit switches V AC V DC Z ( ma) L1 N + - Actuator: BM24C, BM24C-R 24V AC/DC input signal 2-10V feedback signal 2-10V AC 24V DC 24V Y ( ma) + - S4 S5 Y (DC V) Z (DC V) Actuator: BM24C/I, BM24C/I-R 24V AC/DC input signal 4-20mA feedback signal 2-10V AC 24V DC 24V Actuator: BM24C/IOS V AC 20-45V DC input signal 4-20mA feedback signal 4-20mA 2 limit switches 20-30V AC 20-45V DC Z ( ma) L1 N Y ( ma) Z (DC V) Y ( ma) + - S4 S5 BM...-R: version with safety position Y: signal, Z: feedback signal

6 Flow Coefficients - Cv-values Ordering code - A 1 B C Size Charact. 100 % 63 % 40 % 25 % 20% 16 % 12 % 10 % 6,3 % 2,5 % 2 % 1 % 0,4% 1/2" (mod.) linear eq. perc /4" (mod.) lin eq. perc " (mod.) linear eq. perc /4" (mod.) linear eq. perc /2" (mod.) lin eq. perc " (mod.) linear eq. perc /2" (mod.) linear eq. perc " (mod.) linear eq.perc " (mod.) linear eq.perc " (mod.) linear eq.perc " (mod.) linear eq.perc " (mod.) linear eq.perc " (mod.) linear 1056 eq.perc. - Text and pictures are not binding. We reserve the right, to alter the equipment. Data sheet 8230-GS3usa/Version: