SELECTION CHARTS. 3-Way Valves. 110 Clippard Instrument Laboratory, Inc Toggle Valves. Momentary/Detented

Transcription

1 SELECTION CHARTS -Way Valves Flow 00 Ports Order No. Style psig/7 bar) Inlet Outlet Exhaust Normally-Open Normally-Closed Momentary/Detented Brass Toggle Plastic Toggle Page No. Toggle Valves MTV- Poppet 7 scfm #0- #0- #0- D 9 MTV--M5 Poppet 75 l/min M5 M5 M5 D 9 MTV-P Poppet 7 scfm /8 NPT #0- #0- D 9 MJTV- Poppet 5 scfm /8 NPT /8 NPT /8 NPT D 0 MJTV--MG Poppet 600 l/min G/8 G/8 G/8 D 0 FTV- Spool 0 scfm #0- #0- #0- D FTV--M5 Spool 40 l/min M5 M5 M5 D FTV-F Spool 0 scfm #0- #0- #0- D FTV-F-M5 Spool 0 l/min M5 M5 M5 D FTV-P Spool 0.5 scfm /8 NPT /8 NPT /8 NPT D FTV--MG Spool 50 l/min G/8 G/8 G/8 D FTV-FP Spool 0.5 scfm /8 NPT /8 NPT /8 NPT D FTV-F-MG Spool 50 l/min G/8 G/8 G/8 D TV-S Spool 8 scfm #0- #0- hole in body D 9 TV-S-M5 Spool 90 l/min M5 M5 hole in body D 9 TV-SF Spool 8 scfm #0- #0- hole in body D 9 TV-SF-M5 Spool 90 l/min M5 M5 hole in body D 9 TV-SP Spool 8 scfm /8 NPT #0- hole in body D 9 TV-SFP Spool 8 scfm /8 NPT #0- hole in body D 9 TV-M Spool 6.8 scfm #0- #0- hole in body M 9 TV-M-M5 Spool 70 l/min M5 M5 hole in body M 9 TV-MF Spool 6.8 scfm #0- #0- hole in body M 9 TV-MF-M5 Spool 70 l/min M5 M5 hole in body M 9 TV-MP Spool 6.8 scfm /8 NPT #0- hole in body M 0 TV-MFP Spool 6.8 scfm /8 NPT #0- hole in body M 0 TVO-M Spool 6.8 scfm #0- #0- hole in body M 0 TVO-M-M5 Spool 70 l/min M5 M5 hole in body M 0 TVO-MF Spool 6.8 scfm #0- #0- hole in body M 0 TVO-MF-M5 Spool 70 l/min M5 M5 hole in body M 0 TVO-MP Spool 6.8 scfm /8 NPT #0- hole in body M 0 TVO-MFP Spool 6.8 scfm /8 NPT #0- hole in body M 0 SMTV- Spool.4 scfm #-56* #-56* hole in body D 0 Clippard Instrument Laboratory, Inc

2 SELECTION CHARTS -Way Valves Cont d. Flow 00 Ports Order No. Style psig/7 bar) Inlet Outlet Exhaust Normally-Open Normally-Closed Momentary/Detented Brass Toggle Plastic Toggle Page No. Stem Valves FV- Spool 0 scfm #0- #0- through stem FV--M5 Spool 40 l/min M5 M5 through stem FV--MG Spool 40 l/min G/8 G/8 through stem FV-D Spool 0 scfm #0- #0- through stem FV-D-M5 Spool 40 l/min M5 M5 through stem FV-DP Spool 0.5 scfm /8 NPT /8 NPT through stem FV-D-MG Spool 40 l/min G/8 G/8 through stem FV-P Spool 0.5 scfm /8 NPT /8 NPT through stem MAV- Poppet 6.8 scfm #0- #0- through stem MAV--M5 Poppet 70 l/min M5 M5 through stem MAV-P Poppet 6.8 scfm /8 NPT #0- through stem MAV-C Poppet 6 scfm - - through stem MAV-R Poppet 6.8 scfm #0- #0- through stem MAV-R-M5 Poppet 70 l/min M5 M5 through stem MAVO- Spool 0 scfm #0- #0- holes in body MAVO--M5 Spool 45 l/min M5 M5 holes in body MAVO-P Spool 0 scfm #0- #0- holes in body MAVO-C Spool 0 scfm - - holes in body MJV- Poppet 5 scfm /8 NPT /8 NPT through stem MJV--MG Poppet 600 l/min G/8 G/8 through stem MJV-C Poppet scfm - - through stem MJVO- Spool scfm /8 NPT /8 NPT holes in body MJVO--MG Spool 600 l/min G/8 G/8 holes in body MJVO-C Spool 5 scfm - - holes in body SMAV- Spool.4 scfm #-56 #-56 #-56 PAV- Poppet 6.8 scfm #0- #0- holes in body 4 PAV-P Poppet 6.8 scfm #0- /8 NPT holes in body 4 PAVO- Poppet.6 scfm #0- #0- holes in body 4 PAVO-P Poppet.6 scfm #0- /8 NPT holes in body 4 Clippard Instrument Laboratory, Inc

3 -WAY TOGGLE VALVES -WAY TOGGLE VALVES -way valves have a supply, outlet and exhaust port. When the toggle is in the on position air flows from the inlet to the outlet and the exhaust port is blocked. Moving the toggle to the off position closes the inlet and opens the outlet to an exhaust port which vents the outlet to atmosphere. -way toggle valves may have a poppet or spool and by movement of the toggle may either be -position or have a momentary actuation. Medium: Air Materials: Brass body, Buna-N seals, stainless steel stem and spring Stem Travel: /8 (.) Mounting: 5/- thd. Nuts and lockwashers furnished Position Spool Valves Position Spool Valve with /8 NPT Inlet #0- (M5) (inlet ) (exhaust ) #0- (M5) (outlet ) (7.4) 0.5 (.5) /8" NPT (G/8) (inlet ) (7.4) #0- (M5) (outlet ) (exhaust ) 0.5 (.5) 5/- thd..5 (8.6) Input Pressure: 50 psig/0 bar max. Air Flow: psig; psig; 90 6 bar Force For Full Stem Travel: oz. nominal 0.75 (9.5) #0- (M5) (inlet ) Input Pressure: 50 psig 5/- thd..5 (8.6) Air Flow:.6 50 psig; psig Force For Full Stem Travel: oz. nominal 0.75 (9.5) TV-S Position Spool Valve, NP Brass Toggle, #0- TV-S-M5... Position Spool Valve, NP Brass Toggle, M5 TV-SF..... Position Spool Valve, Plastic Toggle, #0- TV-SF-M5.. Position Spool Valve, Plastic Toggle, M5 Position Poppet Valves TV-SP..... Position Spool Valve, NP Brass Toggle TV-SFP.... Position Spool Valve, Plastic Toggle Position N.C. Poppet with Momentary Actuation #0- (M5) (inlet ) /8" NPT (inlet ) #0- (M5) (outlet ) (exhaust ) 5/- thd. #0- (M5) (output ) (exhaust ) 0.5 (.5) (7.4) /8" (9.5) hex. 7/6" (.) hex (5.9) 0.75 (9.5).84 (46.8).09 (5.) 0.65 (5.9) 9/6" (4.) hex. #0- (M5) (input ) 0.75 (9.5).47 (6.5) 5/- thd. Input Pressure: 50 psig/0 bar max. Input Pressure: 50 psig/0 bar max. Air Flow: psig; psig; 75 6 bar Force For Full Stem Travel: 6 oz. nominal Air Flow: psig; psig; 75 6 bar Force For Full Stem Travel: oz. nominal MTV Position Poppet Valve, #0-, NP Brass Toggle MTV--M5.. Position Poppet Valve, M5, NP Brass Toggle MTV-P.... Position Poppet Valve, /8 NPT, NP Brass Toggle TV-M..... Position Poppet Valve, NP Brass Toggle, #0- TV-M-M5.. Position Poppet Valve, NP Brass Toggle, M5 TV-MF.... Position Poppet Valve, Plastic Toggle, #0- TV-MF-M5. Position Poppet Valve, Plastic Toggle, M5 Clippard Instrument Laboratory, Inc

4 -WAY TOGGLE VALVES Position N.C. Spool w/momentary Actuation Position N.O. Poppet w/momentary Actuation /8" NPT (input ) #0- (output ) (exhaust ) #0- (M5) (outlet ) (7.4) (exhaust ) 0.5 (.5) 9/6" hex. 9/6" (4.) hex. Input Pressure: 00 psig max. 5/- thd..656 Air Flow: psig; psig Force For Full Stem Travel: oz. nominal 0.75 TV-MP.... Position Spool Valve, NP Brass Toggle TV-MFP... Position Spool Valve, Plastic Toggle Position N.O. Poppet w/momentary Actuation #0- (M5) (inlet ) 5/- thd (9.5).5 (8.6) Input Pressure: 50 psig/0 bar max. Air Flow: psig; psig; 70 6 bar Force For Full Stem Travel: oz. nominal TVO-M.... Position Spool Valve, NP Brass Toggle, #0- TVO-M-M5. Position Spool Valve, NP Brass Toggle, M5 TVO-MF... Position Spool Valve, Plastic Toggle, #0- TVO-MF-M5 Position Spool Valve, Plastic Toggle, M5 Position Poppet Valves /8" NPT (inlet ) #0- (output ) (exhaust ) /6" hex. /8" NPT (G/8) /8" NPT (G/8) (inlet ) (outlet ) (exhaust ) 0. (7.9) 0.65 (5.9) #0- (inlet ) 5/- thd (.0) IN OUT EXHAUST Input Pressure: 50 psig max. Air Flow: psig; psig Force For Full Stem Travel: oz. nominal Order Information TVO-MP... Position Spool Valve, NP Brass Toggle TVO-MFP.. Position Spool Valve, Plastic Toggle 0.65 (5.9) 0.75 (9.5).75 (60.0) Input Pressure: 00 psig/ bar max. Air Flow: 4 50 psig; 5 00 psig; bar Force For Full Stem Travel: 6 oz. nominal 5/- thd. 5/ Panel Mounting Nut 0.65 Brass with black or bright nickel finish MJTV Position Poppet Valve, /8 NPT MJTV--MG. Position Poppet Valve, G/ /- thd. Part No Black Bright 0 Clippard Instrument Laboratory, Inc

5 -WAY TOGGLE &STEM VALVES Position Spool Valves Position Spool Valves 5/- thd (.) (4.4) (6.7) 0.75 (9.5) 0.65 (5.9) #0- (M5) exhaust 5/- thd..50 (.8) (4.4)(6.7) 0.75 (9.5) 0.65 (5.9) /8" NPT (G/8) exhaust #0- (M5) outlet #0- (M5) inlet.40 (54.4) /8" NPT (G/8) outlet /8" NPT (G/8) inlet.40 (54.4) Input Pressure: 50 psig/0 bar max. Input Pressure: 50 psig/0 bar max. Air Flow: 6 50 psig; 0 00 psig; 80 6 bar Force For Full Stem Travel: 6 oz. nominal Air Flow: psig; psig; 90 6 bar Force For Full Stem Travel: 6 oz. nominal Mounting: 5/- thread. Nuts and lockwashers furnished. Mounting: 5/- thread. Nuts and lockwashers furnished. FTV Position Spool Valve, NP Brass Toggle, #0- FTV--M5... Position Spool Valve, NP Brass Toggle, M5 FTV-F..... Position Spool Valve, Plastic Toggle, #0- FTV-F-M5.. Position Spool Valve, Plastic Toggle, M5 Sub-Miniature Spool Valve FTV-P..... Position Spool Valve, NP Brass Toggle, /8 NPT FTV-P-MG. Position Spool Valve, NP Brass Toggle, G/8 FTV-FP.... Position Spool Valve, Plastic Toggle, /8 NPT FTV-FP-MG. Position Spool Valve, Plastic Toggle, G/8 Sub-Miniature N.O. or N.C. Spool Valve 5/6" hex (9.) 0.87 (4.7) 0.8 (7.) (.7) inlet /4-40 thd. Medium: Air outlet exhaust Input Pressure: 00 psig max. Ports: -56 with /6 ID Hose Barbs Air Flow:.4 00 psig Force For Full Stem Travel: 4 oz. nominal Spool Material: Delrin SMTV-....Sub-Miniature Spool Valve Clippard Instrument Laboratory, Inc /6" hex. N.O. inlet () (N.C. exh.) () outlet SMAV-....Sub-Miniature N.O. or N.C. N.C. inlet () (N.O. exh.) 0.87 (4.7) 0.8 Medium: Air (7.) (9.) Stem Travel: /6 Input Pressure: 00 psig max. Ports: -56 with /6 ID Hose Barbs Air Flow:.4 00 psig Force For Full Stem Travel: 0 oz. nominal Spool Material: Delrin /4-40 thd. Four colors of snap on push buttons included with each valve 0.06 (.6) trav 0.8 (5.5)

6 -WAY STEM VALVES -WAY STEM VALVES -way valves are -way valves with the added function of exhausting the outlet when the valve is closed. When the stem is depressed, the valve is in the Miniature -Way Poppet Valves on' position allowing air to flow from the inlet to the outlet while blocking the exhaust. Releasing the stem closes the inlet and opens the outlet to an exhaust port which vents the outlet to atmosphere. -way stem valves may have a poppet or spool and be normally closed (NC) or normally open (NO). Medium: Air Materials: Brass body, Buna-N seals, stainless steel stem and spring Stem Travel: /8 (.) Position Miniature Spool Valve Cartridge with /8 Valves NPT Inlet /8" (9.5) hex. #0- (M5) (inlet ) 0.50 (6.4) 5/- thd. exhaust (inlet ) "O" rings (exhaust ) (5.9) /8" NPT (inlet ) #0- (M5) (outlet ).47 (6.5).656 (4.) 0.5 (.) 0. (7.9) 0.75 (outlet ) Input Pressure: 00 psig/ bar max. Input Pressure: 00 psig Air Flow: psig; psig; 70 6 bar Force For Full Stem Travel: 4 oz. nominal Mounting: 5/- thread. Nut and lockwasher furnished. MAV-.....Miniature Poppet Valve, #0- MAV--M5..Miniature Poppet Valve, M5 MAV-P....Miniature Poppet Valve, /8 NPT Air Flow:.0 50 psig; psig Force For Full Stem Travel: 4 oz. nominal Mounting: Inserts into a /8 bore ( ) Note: See page 8 for mounting details MAV-C....Normally-Open Poppet Cartridge Valve MAVO-C..Normally-Closed Spool Cartridge Valve N. C. Poppet Valves with Rotatable Inlet Normally-Open Spool Valves #0- (M5) (outlet ) 5/- thd. #0- (M5) (inlet ) 9/6" (4.) hex. part rotates to orient ports 0.50 (6.4).9 (8.4) (exhaust ) 0.5 (.) 0. (7.9) (exhaust ) #0- (M5) (outlet ) #0- (M5) (inlet ) /8" NPT 9/6" (inlet ) (4.) hex. 0. (7.9).45 (6.9).45 (6.9) 0.50 (6.4) 5/- thd. 0.5 (.) Input Pressure: 00 psig/ bar max. Input Pressure: 50 psig/0 bar max. Air Flow: psig; psig; 70 6 bar Air Flow: psig; 0 00 psig; 45 6 bar Force For Full Stem Travel: 4 oz. nominal Mounting: 5/- thread. Nut and lockwasher furnished. Force For Full Stem Travel: oz. nominal Mounting: 5/- thread. Nut and lockwasher furnished. MAV-R....Normally-Closed Valve with Rotatable Inlet, #0- MAV-R-M5.Normally-Closed Valve with Rotatable Inlet, M5 MAVO-....Normally-Open Spool Valve, #0- MAVO--M5 Normally-Open Spool Valve, M5 MAVO-P...Normally-Open Spool Valve, /8 NPT Clippard Instrument Laboratory, Inc

7 -WAY STEM VALVES Position J-Series Spool Poppet Valve Cartridge with /8 Valves NPT Inlet J-Series -Way Poppet Valves (inlet ) Input Pressure: 00 psig (outlet ) 0.65 (5.9) "O" rings 0. (7.9).687 (4.8) (exhaust ) (exhaust around stem) 0.87 (4.7) 0.65 (5.9) /8" NPT (G/8) (inlet ) 0. (7.9) (.) /8" NPT (G/8) (outlet ) IN OUT.56 (9.4).84 (46.8).8 (46.0) 5/- thd (4.7) (exhaust ) 0.75 (9.5) Air Flow: 50 psig; 00 psig Force For Full Stem Travel: 8 oz. nominal Mounting: Inserts into a 5/8 bore (0.65 ±0.00 ) Note: See page 8 for mounting details Input Pressure: MJV-/MJV--MG - 00 psig/ bar max. MJVO-/MJVO--MG - 50 psig/0 bar max. Air Flow: psig; 5 00 psig; bar Force For Full Stem Travel: 8 oz. nominal MJV-C.....-Way Normally-Closed Poppet Cartridge Valve MJVO-C...-Way Normally-Open Poppet Cartridge Valve Position FV-Series Spool -Way Valve with Spool /8 Valves NPT Inlet Mounting: 5/- thread. Nuts and lockwashers furnished. MJV Normally-Closed Valve with Spring Return, /8 NPT MJV--MG..Normally-Closed Valve with Spring Return, G/8 MJVO-....Normally-Open Spool Valve, /8 NPT MJVO--MG.Normally-Open Spool Valve, G/8 Position FV-Series Spool -Way Valve with Spool /8 Valves NPT Inlet 0.65 (5.9) 5/- thd (.) 0.96 (7.5) 0.75 (9.5) 0.87 (4.7) 5/- thd..50 (.8) 0.96 (7.5) 0.75 (9.5) 0.87 (4.7) #0- (M5) typ (9.5).40 (54.4).500 (64.0) 0.7 (4.) /8" NPT (G/8) typ (9.5) 0.7 (4.).40 (54.4).50 (64.0) Input Pressure: Vacuum to 50 psig/0 bar max. Air Flow: 6 50 psig; 0 00 psig; 40 6 bar Force For Full Stem Travel: FV- & FV--M5-4 / pounds nominal. FV-D & FV-D-M5 - / pounds nominal Mounting: 5/- thread. Nuts and lockwashers furnished. FV Way Spool Valve, #0- FV--M5....-Way Spool Valve, M5 FV-D Way Two Position Spool Valve, #0- FV-D-M5..-Way Two Position Spool Valve, M5 Clippard Instrument Laboratory, Inc Input Pressure: Vacuum to 50 psig/0 bar max. Air Flow: psig; psig; 40 6 bar Force For Full Stem Travel: FV-P & FV--MG - 4 / pounds nominal. FV-DP & FV-D-MG - / pounds nominal Mounting: 5/- thread. Nuts and lockwashers furnished. FV-P......Spool Plunger Actuated Spring Return Valve, /8 NPT FV--MG...Spool Plunger Actuated Spring Return Valve, G/8 FV-DP.....Spool Double Plunger Position Valve, /8 NPT FV-D-MG..Spool Double Plunger Position Valve, G/8

8 -WAY AIR-PILOTED & LIMIT VALVES -WAY AIR-PILOTED VALVES -way valves have an inlet, outlet and exhaust port. When an air signal is applied to the pilot of a normally closed (NC) valve the inlet is open to the outlet and the exhaust is blocked; removing the pilot closes the inlet and the outlet is open to the exhaust port which vents to atmosphere. When an air signal is applied to the pilot of a normally open (NO) valve the inlet is blocked and the outlet is vented; removing the pilot signal opens the inlet to the outlet and blocks the exhaust. Medium: Air only Materials: Brass body, Buna-N seals, stainless steel stem and spring Mounting: 5/8- thread or #4 screw. Nut and lockwasher may be ordered separately. Part Number: PAV-MH Air Pilot Pressure: 5 psig min. Foot Bracket: FB-79 Air-Piloted Normally-Closed Poppet Valves Air-Piloted Position Spool Normally-Open Valve with Poppet /8 NPT Valves Inlet mounting holes for #4 screw #0- (M5) (outlet ) (exhaust ) 5/8- thd. mounting holes for #4 screw (exhaust ) 5/8" (5.9) sq. 5/8- thd. #0- (M5) (outlet ) #0- (M5) pilot #0- (M pilot 0.47 (.) 5/8" sq. #0- (M5) (inlet ) Input Pressure: 00 psig max. /8" NPT (G/8) (inlet ).406 (5.7).656 (4.) Air Flow: psig; psig PAV Normally-Closed Poppet Valve, #0- PAV-P.....Normally-Closed Poppet Valve, /8 NPT 0.5 (.) 0.75 (9.5) 0.5 (.5) #0- (M5) (inlet ) Miniature Limit Valve 0.47 (.) Input Pressure: 50 psig max..406 (5.7).8 (46.) Air Flow: psig;.6 00 psig PAVO-....Normally-Open Poppet Valve, #0- PAVO-P...Normally-Open Poppet Valve, /8 NPT 0.5 (.) 0.75 (9.5) 0.5 (.5) #0- (inlet ) 0.66 thru ( holes) #0- (outlet ) 5/- thd. (exhaust ) Stem Travel: /8 Input Pressure: 50 psig max. Air Flow: 4 50 psig; 7 00 psig Force for Full Stem Travel: 48 oz. nominal Mounting: Dual #0 holes or 5/- thd. Nut and lockwasher furnished MLV Normally-Closed Miniature Limit Valve 4 Clippard Instrument Laboratory, Inc

9 VALVE ACTUATORS The following valve actuators are compatible with all Clippard MAV, MAVO, MJV, MJVO, ES-, & FV series valves. One of the most versatile items in the Clippard line. Permits wide circuit flexibility and allows many control functions to be accomplished pneumatically with less cost, hazards and complexity. Threads onto the tops of our Miniature -way, -way, and 4-way valves and ES- electric switch to provide fast pilot actuation from a pneumatic signal PC-B MAV- MAV- Manual Push Buttons Vacuum Actuator MAV-4 MJV-4 FV Series MVA-0, MVA-0P PS-PE-Y PS-LM-R MPA Actuators Can: Remotely actuate any number of valves and switches simultaneously in different strategic locations from a single miniature -way valve PC-5F-GN Roller Actuators Push Buttons PC-E-BL PC-4M-WH Make an ES- into a pressure switch Act as an air relay, i.e., one pressure source to another. Operate the MAV-4D from a single impulse. Serve as a pressure interlock or safety device, i.e., turn off power when pressure fails, etc. Provide an electric take off from a pneumatic source to start and stop power, actuate electric counters, indicator lights on panel boards, etc. 96 Air Actuators MPA- MPA-P Foot Pedal Actuator 95 MPA-0 MPA-0P MPA-5 MPA-5P MBA- MPA-7 MJV- MJV- FPA- ES- Manual Push Buttons PC-R Clippard Instrument Laboratory, Inc

10 VALVE ACTUATORS Adjustable travel foot pedal Foot Pedal Construction: Sturdy cast aluminum and black oxided steel Control Devices: May be fitted with any Clippard -, - or 4-way valve or MAR-C pressure controller with a #5/- mounting thread Mounting: To floor or other structure with two 9/ mounting holes stroke plunger adjustable to accommodate a variety of valves 0.06 FPA Adjustable Travel Foot Pedal 5/- thd. for valve mounting Hands-free touch-of-toe operation of endless types of automated and semi-automated machinery and equipment, jigs and fixtures, is possible thru use of this sturdy treadle type foot pedal, combined with Clippard miniature valves, plunger type air pressure controls, and electrical switch. A sliding link mechanism between treadle and mounting sleeve actuates the component, and a set screw at the back of pedal base adjusts treadle travel. Pedal is spring loaded at approximately / lb. for return to off position. Note for MBA-, 95 & 96: When mounting on a valve, a space should be provided between the body and the actuator according to the chart to the right: Valve mtg. thd. MBA thd length thd length A mounting nut (supplied with valve), mounting bracket or washers should be used to obtain the required spacing. Ball Cam Actuator Roller Cam Actuator Double-Pivoted Actuator Ball Cam Actuator permits the valves and electrical switch to be operated by mechanical movement depressing the ball from any direction 5/- thd. vent (9.) 0.87 (4.9) 9/6" hex. Construction: Body - brass Ball - stainless steel retained in housing Operation: Will actuate valve while depressed from any (60 ) direction Mounting: 5/- female to mount to Clippard miniature valves and electric switch MBA Ball Cam Actuator (.7) 0. (7.9) (.7) (.) 0.75 (9.5) (7.4) 0.87 (4.7) 0.75 (9.5) (.7) Construction: Stainless steel with nylon roller Temperature Range: to 0 F Mounting: /64 mounting hole fits 5/- threaded mounting section of valve bodies Operation: Mounts to valve body, actuates valve when mechanically depressed; valve spring provides return Roller Cam Follower Actuator (.7) 0. (7.9) (.7) (.) (.7) 0.75 (9.5) 0.8 (0.6) 0.8 (5.5) 0.87 (4.7) 0.75 (9.5) (7.4) Construction: Stainless steel with nylon roller Mounting: /64 mounting hole fits 5/- threaded mounting section of valve bodies Operation: Mounts to valve body, actuates valve when depressed by activating cam or linear travel device in one direction only; no actuation on return travel Roller, Double-Pivoted One- Way Cam Follower Actuator 8 Clippard Instrument Laboratory, Inc

11 AIR PILOTED VALVE ACTUATORS MINIMUM PRESSURE REQUIRED (psig)* Clippard Valve Pressure (psig) Vacuum (in Hg) Clippard Valve Pressure (psig) Vacuum (in Hg) w/mpa w/mpa-5 w/mpa-7 w/mpa-0 w/mva-0 ES- Switch 4 * * MAV- Valve MAV- Valve MAV-4 Valve MJV-4 Valve MAV-4D Valve MJV-4D Valve MJV- Valve MJV- Valve MAVO- Valve MAVO- Valve MJVO- Valve MJVO- Valve w/mpa w/mpa-5 w/mpa-7 w/mpa-0 w/mva-0 FV FV-P FV FV-4P FV FV-5P FV-D FV-DP FV-4D FV-4DP FV-5D FV-5DP *with 00 psig to valve inlet Single Acting Air Pilot Actuators /4" (9.) hex.. (.) Input Pressure: 50 psig/7 bar max. vent Construction: Body - brass; Springs - stainless steel; Seals - Buna N rubber; Piston - Delrin Mounting: 5/- female thread to mount to Clippard miniature valves and components #0- (M5) thd. 5/- thd. /4" (9.) hex. #0- (M5) thd.. (.) 5/- thd (4.) (.) flats vent 0.5 (.) vent (5.4) /8" NPT (G/8) Bore Size: 0.65 (5.9) Force Factor: 0. 5/- thd. /8" NPT (G/8) (5.9) (.7) flats 5/- thd. MPA Single Acting, Spring Return Actuator, #0- MPA-5-M5..Single Acting, Spring Return Actuator, M5 Metric MPA-5P....Single Acting, Spring Return Actuator, /8 NPT MPA-5-MG..Single Acting, Spring Return Actuator, G/8 0.5 (.).8(0.9) Bore Size: 0.75 (9.5) Force Factor: 0. MPA-.....Single Acting, Spring Return Actuator, #0- MPA--M5..Single Acting, Spring Return Actuator, M5 MPA-P....Single Acting, Spring Return Actuator, /8 NPT MPA--MG..Single Acting, Spring Return Actuator, G/8 Clippard Instrument Laboratory, Inc vent (5.4) (.) flats /8" NPT (G/8).65 (4.) 0.8 (5.5) Bore Size: 0.85 (.0) Force Factor: 0.6 MPA Single Acting, Spring Return Actuator, /8 NPT MPA-7-MG..Single Acting, Spring Return Actuator, G/8 5/- thd. 9 vent

12 VALVE ACTUATORS Pilot Actuators Single Acting Spring Return Pilot Actuator Vacuum Actuators Single Acting Spring Return Vacuum Actuator flats 0.87 Vent 5/- thd. mounting flats 0.87 #0- thd. or /8" NPT* 5/- thd. mounting #0- thd. or /8" NPT* vent Bore Size:.50 Input Pressure: 50 psig max. Mounting: 5/- female thread to mount to Clippard Minimatic valves and components; no spacers or washers are required when assembled to any Clippard valve; may be used with 508- mounting bracket Force Factor:. MPA-0....Single Acting, Spring Return Actuator, #0- MPA-0P...Single Acting, Spring Return Actuator, /8 NPT Input Pressure: 0 in. Hg vacuum Mounting: 5/- female thread to mount to Clippard Minimatic valves and components; no spacers or washers are required when assembled to any Clippard valve; may be used with 508- mounting bracket MVA-0....Single Acting, Spring Vacuum Actuator, #0- MVA-0P...Single Acting, Spring Vacuum Actuator, /8 NPT Push Button Actuators, 5/8 Push Button Actuators, / Round Solid Brass 5/8 Push Button or deep Round Solid Brass / Push Button 0.5 or deep Use: Mounts directly on valve stem for manual operation of valve; prevents overtravel of valve stem by providing a positive stop Mounting: /8 or /6 mounting hole fits valve stems; locks in place by set screw (Allen wrench furnished) Note: Individually packaged or bulk quantities available /8 Brass Push Button, /8 Stem /8 Brass Push Button, /6 Stem Use: Mounts directly on valve stem for manual operation of valve; small size permits attachment to valve before valve is mounted through 5/ hole; prevents overtravel of valve stem by providing a positive stop Mounting: /8 or /6 mounting hole fits valve stems; locks in place by set screw (Allen wrench furnished) Note: Individually packaged or bulk quantities available / Brass Push Button, /8 Stem / Brass Push Button, /6 Stem 40 Clippard Instrument Laboratory, Inc

13 PUSH BUTTON ACTUATORS Captivated Push Buttons Clippard also offers the captivated push button for use with a large variety of stem operated valves. Captivated push buttons are sold as kits, adaptable to either /8 diameter stems or /6 diameter stems. Each kit includes a colored acetyl push button, brass housing nut, /6 brass spacer, and lock washer for assembly. The standard furnished mounting nut has a bright chromate finish. Black chrome or nickel-plated finishes are also available by adding the suffix -BC or -NP to the part number. Captivated push buttons can be used on individual stem operated valves or in panel mount application by omitting the /6 brass spacer. These push buttons are available in a variety of colors, allowing you to color code, or easily differentiate between valves when designing control systems. The design of these push buttons allows maximum actuation of the valve with no overtravel or side load to the valve stem. This assures superior performance and long life. Captivated push buttons are commonly used as limit valves in conjunction with pneumatic cylinders, slides, and any variety of mechanical actuators. The rugged design coupled with precise actuation of stem operated valves make it perfect for applications where repetitive cycling of the valve is necessary. Designed to work with Clippard MAV, MJV, and FV series, these push buttons integrate easily into Minimatic systems, providing optimal quality and efficiency in Miniature pneumatic control. P C - (- ) Push Button Captivated Valve Stem /8 / "A" Push Button color B - Black G - Green R - Red Options W - White BC - Black chrome Y - Yellow NP - Nickel plated 0.5 panel, mounting bracket, or /6 spacer and lock washer (provided) captivated nut 9/6" hex. Spacing Required for Proper Actuation of Push Button Valve MAV-, MAV- MAVO-, MAV0- A Dim. / MAV-4, MAV-4D MJV-4, MJV-4D 5/ MJV-, MJV- MJVO-, MJVO- FV-, FV-4, FV-5 7/ Clippard Instrument Laboratory, Inc

14 PUSH BUTTON ACTUATORS Heavy-Duty Push Button Actuators Heavy Duty Push Button Actuators can be used on individual stem operated valves or in panel mounting applications. These push buttons are available in a variety of colors, allowing you to color code, or easily differentiate between valves when designing control systems. They feature a built-in spring so the button always returns to the extended position when released with no additional load on the valve. The design of these push buttons allows complete actuation of the valve with no overtravel or side load to the valve assuring superior performance and long life. P C - - Push Button Captivated Size Mounting Thread - 5/8- thd. (6 mm) 4-7/8- thd. ( mm) 5 - /6-8 thd. (0 mm) Button Style E - Extended F - Flush M - Mushroom Push Button color BK - Black WH - White RD - Red GN - Green YL - Yellow BL - Blue OR - Orange GR - Grey Note: Non-standard colors available; consult factory PC-E-(color)....5/8- Thd., Extended (specify color) PC-4E-(color)....7/8- Thd., Extended (specify color) PC-5E-(color).. /6-8 Thd., Extended (specify color) PC-F-(color)....5/8- Thd., Flush (specify color) PC-4F-(color)....7/8- Thd., Flush (specify color) PC-5F-(color).. /6-8 Thd., Flush (specify color) PC-M-(color)...5/8- Thd., Mushroom (specify color) PC-4M-(color)...7/8- Thd., Mushroom (specify color) PC-5M-(color). /6-8 Thd., Mushroom (specify color) 4 Clippard Instrument Laboratory, Inc

15 PUSH BUTTON ACTUATORS Features Assembles directly to the valve; no adapters required Ideal for mounting on panels or brackets, up to /4 thick panel Self-contained assembly; no loose parts Stainless steel spring returns button to extended position with no added load to the valve stem Three sizes: 6 mm (5/8 ), mm (7/8 ) and 0 mm (-/6 ) Flush, extended and mushroom style buttons Five bright colors for visibility and operator recognition. Other colors available upon request Nickel plated brass housing and nut, molded Delrin button and stainless steel spring for long life and corrosion resistance Protects the valve from overtravel and side load Different valve models vary in mounting thread length, stem extension and stroke. To accommodate these differences, the chart below lists the recommended spacing ( S ) to insure complete valve actuation. Provided with each button is a /6 thick spacer ring that may be used in place of a panel or bracket to obtain proper spacing. The lockwasher provided may be used with no significant effect on spacing. SIZE 5/8- (6 mm) mtg. thd. 7/8- ( mm) mtg. thd. /6-8 (0 mm) mtg. thd. "H" 0.50 max. "S" spacing see chart exhaust vent DIMENSIONS MODEL "D" +/ D H T P -0 F Dia. Hgt. Thd. Panel Hole Hex Flats PC-E PC-F /8-5/8 /4 PC-M PC-4E PC-4F /8-7/8 -/6 PC-4M PC-5E PC-5F /6-8 -/6-5/6 PC-5M colored delrin pushbutton housing "F" hex. flats "T" thread nut "F" hex. flats spring panel or bracket brass valve (MJV- shown) "P" panel hole size SPACING S REQUIRED FOR PROPER VALVE ACTUATION Valve series Mounting thd. Stem extension Valve stroke MAV- MAVO- MAV-4 MAV-4D MAV- MAVO- MJV-4 MJV-4D MJV-,- MJVO-,- FV-, FV-4, FV-5 /4 /4 /8 5/6 /8 5/6 /8 /6 /8 S Minimum Maximum Clippard Instrument Laboratory, Inc none none /6 /6 /6 /8 4

16 PUSH BUTTON ACTUATORS Easily actuated, clearly identifiable panel controls are the hallmark of a professional control system. Whether the system is a single valve machine control... or an operating console for controlling complex pneumatic systems... you will find the actuator you require. The line includes round push buttons, in flush, extended, and mushroom styles. Also included are key locking controls, and twist actuators. An electric switch is also available where a combination of electric and pneumatic switching is desired in a single panel. As shown in the drawing, a PB-85 is required to connect a push button and a Clippard valve. Actuator Mounting Chart The following chart gives the necessary spacing required between the shoulder of the valve and the base of the adapter. Valves MAV-, -P, -R, -R, -, -P MAVO-, - MJV-, - MJVO-, - Minimatic Actuators Dimensions Size Size 0 Model A B Model A B PS-PF PL-PF PS-PE PL-PE PS-PM PL-PM PS-LM PL-LM PS-P4K.56.0 PL-P4K PS-L4M PL-L4M PS-TT PL-TT PS-TT PL-TT PS-TK.56.0 PL-TK PB-85 None /8 push button or twist mounting panel nut fits into hole PB-85 space or thickness brass valve "A" Manual Actuator Features "B" dependent upon valve used Attractive and rugged: precision molded ABS plastic Two sizes: 0 mm ( /64 ) in 0 models mm (7/8 ) in 0 models 4 bright colors for visibility and operator recognition Flush, extended, and mushroom styles Custom adapter mates manual actuator with 6 different Clippard -, -, and 4-way valves. Valve and adapter slide on and lock onto actuator in seconds. Easily removed. Special wrench fits both sizes, speeds assembly Actuators may be mounted or dismounted in panel independent of valve and adapter MAV-4, -4D MJV-4, -4D ES- FV-, -P, -D, -DP FV-4, -4P, -4D, -4DP FV-5, -5P, -5D, -5DP None None /8 9 legend plates available plus blank plates in each size Valve and adapter may be locked onto actuator in any of four positions to ease installation inside panel Anti-rotation rings available for secure mounting Key lockable push buttons for security and/or safety 44 Clippard Instrument Laboratory, Inc

17 PUSH BUTTON ACTUATORS Legend Text Size Part # Size Part # Blank PS-0 PL-0 Start PS-0 PL-0 Stop (red) PS-0 PL-0 Forward PS-04 PL-04 Reverse PS-05 PL-05 Fast PS-06 PL-06 Slow PS-07 PL-07 On PS-08 PL-08 Off (red) PS-09 PL-09 Reset PS-0 PL-0 Raise PS- PL- Lower PS- PL- Emergency Stop (red) PS- PL- Run / Jog PS- PL- Auto / Hand PS- PL- Forward / Reverse PS- PL- Fast / Slow PS-4 PL-4 Open / Close PS-5 PL-5 Up / Down PS-6 PL-6 Off / On PS-7 PL-7 Mounting Clippard Manual Actuators These drill plans are for units fitted with optional anti-rotation ring Plastic legend plate, two sizes, with a black field and white inscription (red as noted). Inscription plates are interchangeable in both sizes. Accessories for Manual Actuators Fits both Size and 0 Size manual actuators. PB Mounting Wrench Adapts all manual actuators to any Clippard standard -, -, or 4-way brass valve. Made of ZYTEL ST-90 Supertough Nylon. PB Valve Adapter Legend Plates Mounting Wrench Valve Adapter Square Bezel ZYTEL is a registered trademark of E.I. DuPont Converts any Size actuator to a square actuator Size - Typical drill plan PS Square Bezel Replacement Mounting Nut Mounting nut that holds manual actuators to panel. Included with manual actuators. Size only PS Replacement Mounting Nut Anti-Rotation Ring Size 0 - Typical drill plan Holds push button in one position. Included with all twist manual actuators. PS Anti-Rotation Ring, mm PL Anti-Rotation Ring, 0 mm Clippard Instrument Laboratory, Inc

18 PUSH BUTTON ACTUATORS Manual Actuators Push Button Size P Size S - Small ( mm) L - Large (0 mm) - - Off On Actuation Actuation 4 - Key P - Push - Twist T - Twist - Spring K - Key L - Latching (Push) Button Type F - Flush E - Extended M - Mushroom T - Twist K - Key Color R - Red G - Green B - Black Y - Yellow Flush Push Button. Manual Push In. Spring Return. Extended Push Button. Manual Push In. Spring Return. Manual Push Mushroom. Manual Push In. Spring Return. PS-PF-R....Red PS-PF-G...Green PS-PF-B....Black PS-PF-Y....Yellow PS-PE-R....Red PS-PE-G...Green PS-PE-B....Black PS-PE-Y....Yellow PS-PM-R...Red PS-PM-G...Green PS-PM-B...Black PS-LM-R...Red PS-LM-G...Green PS-LM-B...Black PS-TT-B....Black Automatic Push/Turn Mushroom. Manual push In Latches In. Turn clockwise to unlatch. Spring return. Spring Return Twist 45. Turn clockwise and hold for In. Release for spring return. Black only. PS-P4K-B...Black PS-TT-B....Black Push Key Push Button. Manual push In. Spring return. Turn key counter-clockwise to lock Out ; clockwise to unlock. Key withdrawable locked or unlocked. Black only. Maintained Twist 90. Turn clockwise to latch In. Turn counterclockwise to release. Black only. PS-L4M-R...Red Push Key Mushroom. Manual push In. Automatic latches In. Turn key clock-wise to release. Spring return. Key withdrawable Out position only. Red only. Key Twist 90 Maintained. (PS-TK-B) Turn key clockwise to latch In. Turn key counterclockwise to release. Key with-drawable in both positions. Black only. (PS-KK-B) Same as PS-TK-B except key is withdrawable in Out position only. PS-TK-B...Black PS-KK-B...Black 46 Clippard Instrument Laboratory, Inc

19 PUSH BUTTON ACTUATORS Size 0 Flush Push Button. Manual push In. Spring return. Extended Push Button. Manual push In. Spring return. PL-PF-R....Red PL-PF-G...Green PL-PF-B....Black PL-PF-Y....Yellow PL-PE-R....Red PL-PE-G...Green PL-PE-B....Black PL-PE-Y....Yellow Key Twist 90 Maintained. (PL- TK-B) Turn key clockwise to latch In. Turn key counterclockwise to release. Key with-drawable in both positions. Black only. (PL-KK-B) Same as PL-TK-B except key is withdrawable in Out position only. PL-TK-B...Black PL-KK-B...Black PL-LM-R...Red PL-LM-G...Green PL-LM-B...Black Automatic Push/Turn Mushroom. Manual push In. Latches In. Turn clockwise to unlatch. Spring return. Push Key Push Button. Manual push In. Spring return. Turn key counterclockwise to lock Out ; clockwise to unlock. Key withdrawable locked or unlocked. Black only. PL-P4K-B...Black Push Key Mushroom. Manual push In. Automatic latches In. Turn key clockwise to release. Spring return. Key withdrawable Out position only. Red only. PL-L4M-R...Red Spring Return Twist 45. Turn clockwise and hold for In. Release for spring return. Black only. Maintained Twist 90. Turn clockwise to latch In. Turn counterclockwise to release. Black only. Manual Push Mushroom. Manual push In. Spring return. PL-TT-B....Black PL-TT-B....Black PL-PM-R...Red PL-PM-G...Green PL-PM-B...Black Clippard Instrument Laboratory, Inc

20 PALM BUTTONS Pneumatic Totalizing Counter This unit is a 6-digit pneumatic totalizing counter, designed for panel mounting. Its operation is identical to that of the PT-SM, but in a different physical arrangement. Both units may be reset manually or by a pneumatic impulse. Operating pressure range is extremely wide (0 to 0 psig). Display: 6 figures, numerals to #0- thd..04 Medium: filtered compressed air containing no oil Reset: Manual push button and pneumatic spring return Input Pressure: 0-0 psig Mounting: Panel mount Way Poppet Palm Button Valves PT-PM.....Pneumatic Totalizing Counter, 6-Digit Low Force -Way Palm Button Valves Way Poppet (MAV-C) Normally Closed - Bubble Tight Cartridge Valve (- replaceable) stroke button -way low force poppet valve; Normally closed; depressing button blocks the sensing port causing rapid value opening button 0.05 stroke Medium: Air Stem Travel: /8 Input Pressure: 00 psig max /8-7 NPT () places 0.0 mounting holes for #0 screw Air Flow:.5 psig; 6.0 psig Bleed: psig Force to Actuate:.75 lb. manual Ports: /8 NPT - exhaust may be muffled or piped away but NOT restricted Mounting: Mounting holes provided; optional Bracket Kit #959 provides additional mounting versatility; valve available with anodized color buttons PB--RD....-Way Poppet Bubble Valve, Red PB--GN....-Way Poppet Bubble Valve, Green PB--BK....-Way Poppet Bubble Valve, Black Mounting Bracket Kit (shown below) /8" NPT supply #8- thd. mounting holes /8" NPT exhaust Medium: Air.09 /8" NPT load Input Pressure: 00 psig max. Air Flow: SCFM psig Bleed: psig Force to Actuate: oz. manual Mounting: Mounting holes provided; optional Bracket Kit #00-50 provides additional mounting versatility; valve available with anodized color buttons PB--RD....Low Force -Way Poppet Valve, Red PB--GN....Low Force -Way Poppet Valve, Green PB--BK....Low Force -Way Poppet Valve, Black Mounting Bracket Kit (shown below) 90 Mounting Bracket Mounting Bracket 90 angle, heavy duty versatile Mounting Bracket for Clippard palm button valves 0.8 (6) places 0.06 Bracket to mount 00, 0-, 0 and 0 valves 0.8 mounting holes (4) places Mounting: Six 7/ holes on /8 centers for attaching valves to bracket Construction: Stamped 0. from /8 thick steel, zinc plated Mounting Bracket Kit typ Black oxide finish, two mounting screws furnished valve mounting holes Mounting Bracket Kit sq Clippard Instrument Laboratory, Inc