Valencia Radiator Valve Range

Size: px

Start display at page:

Download "Valencia Radiator Valve Range"

Benedict Lamb
5 years ago
Views:

Valencia Radiator Valve Range VTL00 VTL0 VHL0 VT00 VT Application PRODUCT DATA SHEET Thermostatic Radiator Valves (TRVs) provide local control of room temperatures to maintain comfort and save energy.

Air from the room passes over the sensor of the TRV causing the liquid to expand as the temperature rises. The sensor acts onto the valve spindle causing the TRV insert to close.

Only the amount of water required to maintain the room temperature set on the radiator thermostat will flow into the radiator.

1 Valencia Radiator Valve Range VTL00 VTL0 VHL0 VT00 VT Application PRODUCT DATA SHEET Thermostatic Radiator Valves (TRVs) provide local control of room temperatures to maintain comfort and save energy. TRVs sense the air temperature around them and control the flow of water through the radiator to which they are fitted, to maintain and limit the temperature within the room. Air from the room passes over the sensor of the TRV causing the liquid to expand as the temperature rises. The sensor acts onto the valve spindle causing the TRV insert to close. When the temperature falls, the liquid contracts and the spring-loaded valve spindle opens. Only the amount of water required to maintain the room temperature set on the radiator thermostat will flow into the radiator. New research carried out on behalf of TACMA, the Controls Association within BEAMA, shows that, in a typical UK house, heating system energy consumption can be reduced by up to 0% through the installation of TRVs in addition to a Room Thermostat or Programmable Room Thermostat and that installation costs could be recovered within a year. These tests also showed that by providing local temperature control in every room, TRVs can significantly improve comfort for householders by providing better heat distribution around a dwelling, not achieved without TRVs, even if the system is correctly balanced. 0 Features All Valencia TRVs are A Rated for efficiency using liquid sensors to provide consistent and longer lasting performance The TRV head may be mounted vertically or horizontally by swapping the tailpiece and pipe fittings The Valencia Valve bodies are fully compatible with a wide range of other Honeywell TRV heads offering alternative finishes, remote sensor and Vandal resistant versions as well as the Evohome electronic TRV head All Valencia valve bodies allow bi-directional water flow which means that valves can be installed without the need to adjust the insert flow direction after installation Quiet operation Straight and Angled bodies with mm, 0mm or mm compression connections or 0mm Pushfit fittings are available mm play on radiator tailpiece to allow for variation in radiator distance from the valve. The integrated balancing insert allows the system to be balanced and remain balanced when radiator is removed for decorating or replacement. Specification European Standard EN and Keymark approved Suitable for heating water quality to VDI0 VT/VTL0 setting range : C VT00/VTL00 setting range : C TRV Head connection size : M0 x.mm Closing dimension:. mm Stroke:, mm Specific stroke (TRV head): 0. mm/k Maximum Water Temperature: 0 C Maximum Water Pressure: 0 bar Maximum Differential Pressure for reliable and quiet operation:.0 bar DN angle kvs: 0. m/h DN straight kvs: 0. m/h Nominal flow: 0 kg/h Please Note: Heating system water quality should conform with VDI-Guideline 0 Additives must be suitable for EPDM seals The system must be flushed with all valves fully open EN0H-VA0GE R0

2 Design TRV head: Plastic Handwheel (T00 has a chrome plated metal cap) VT00/VTL00 metal-plated chrome or brushed metal finish body variants Nickel or Chrome plated metal connection ring Internal metal liquid filled brass sensor TRV valve: Chrome plated brass angle or straight valve housing PN0 DN Dimensions according EN, appendix A, series GB Integrated (SLBB) balancing insert made of brass with EPDM O-rings, soft seals and stainless steel spindle Plastic decorators cap Chrome plated union nuts and radiator tailpiece Brass compression olives Lockshield valve: Chrome plated brass angle or straight housing PN0 DN Brass insert Plastic protection cap Chrome plated union nuts and radiator tailpiece Brass compression olives EN NOTE: NOTE: All C- and F-values specified at ideal incident flow. This can differ from stated values depending on installation position and air flow. TRV Settings NOTE: Thera-00 (Traditional) with liquid sensor C ( F) C ( F) 0.K 0.K 0.K min. Influence of differential pressure depends on TRV body used. Thera-00 (Classic) with liquid sensor C ( F) C ( F) 0.K 0.K.0K 0 min. EN requirements... C (... F C (0 F) Min. setpoint temperature ( -position) ) Max. setpoint temperature ysteresis nfluence of differential pressure nfluence of heating medium Response time H.0K I.0K I.K 0 min. VT / VTL0 VT00 / VTL00 closed C C C C 0 C C C 0 N/A Values approximate. Heating can freeze when radiator thermostats with zero-position are set at position '0'. Zero-position is also thermostatically controlled - when temperature falls the TRV may open. EN0H-VA0GE R0

3 Classic TRV Dimension, part numbers and descriptions Honeywell Honeywell la a la a a a Part Number H h h h h l la l la l l l la VT00-S 0 VT00-A VTL00-0A VTL00-0A VTL00-A VTL00-A-C VTL00-A-D VTL00-A-P VTL00-A-DP VTL00-0S 0 VTL00-0S 0 VTL00-S 0 VTL00-S-C 0 VTL00-S-D VTL00-S-P 0 VTL00-S-DP Part Number Type Size Pattern Ancillary Parts VT00-S Classic TRV mm Straight VT00-A Classic TRV mm Angled VTL00-0A Classic TRV + Lockshield mm Angled VTL00-0A Classic TRV + Lockshield 0mm Angled VTL00-A Classic TRV + Lockshield mm Angled VTL00-A-C Classic TRV + Lockshield mm Angled Chrome TRV Head VTL00-A-D Classic TRV + Lockshield mm Angled Drain-off tailpiece VTL00-A-P Classic TRV + Lockshield 0mm Pushfit Fittings Angled VTL00-A-DP Classic TRV + Lockshield 0mm Pushfit Fittings Angled Drain-off tailpiece VTL00-0S Classic TRV + Lockshield mm Straight VTL00-0S Classic TRV + Lockshield 0mm Straight VTL00-S Classic TRV + Lockshield mm Straight VTL00-S-C Classic TRV + Lockshield mm Straight Chrome TRV Head VTL00-S-D Classic TRV + Lockshield mm Straight Drain-off tailpiece VTL00-S-P Classic TRV + Lockshield 0mm Pushfit Fittings Straight VTL00-S-DP Classic TRV + Lockshield 0mm Pushfit Fittings Straight Drain-off tailpiece EN0H-VA0GE R0

4 Traditional TRV Dimension, part numbers and descriptions la a la a a a Part Number H h h h h l la l la l l l la VT-S 0 0 VT-A 0 VTL0-0A 0 VTL0-0A 0 VTL0-A 0 VTL0-A-D 0 VTL0-A-P 0 VTL0-A-DP 0 VTL0-0S 0 0 VTL0-0S 0 0 VTL0-S 0 0 VTL0-S-D 0 VTL0-S-P 0 0 VTL0-S-DP 0 Part Number Type Size Pattern Ancillary Parts VT-S Traditional TRV mm Straight VT-A Traditional TRV mm Angled VTL0-0A Traditional TRV + Lockshield mm Angled VTL0-0A Traditional TRV + Lockshield 0mm Angled VTL0-A Traditional TRV + Lockshield mm Angled VTL0-A-D Traditional TRV + Lockshield mm Angled Drain-off tailpiece VTL0-A-P Traditional TRV + Lockshield 0mm Pushfit Fittings Angled VTL0-A-DP Traditional TRV + Lockshield 0mm Pushfit Fittings Angled Drain-off tailpiece VTL0-0S Traditional TRV + Lockshield mm Straight VTL0-0S Traditional TRV + Lockshield 0mm Straight VTL0-S Traditional TRV + Lockshield mm Straight VTL0-S-D Traditional TRV + Lockshield mm Straight Drain-off tailpiece VTL0-S-P Traditional TRV + Lockshield 0mm Pushfit Fittings Straight VTL0-S-DP Traditional TRV + Lockshield 0mm Pushfit Fittings Straight Drain-off tailpiece EN0H-VA0GE R0

5 Traditional TRV - Matching Valve With Manual Operating Cap Dimension, part numbers and descriptions a a a a a a Part Number H h h h h l la l la l l l la VHL0-0A VHL0-0A VHL0-A VHL0-A-D VHL0-A-P VHL0-A-DP VHL0-0S 0 VHL0-0S 0 VHL0-S 0 VHL0-S-D VHL0-S-P 0 VHL0-S-DP Part Number Type Size Pattern Ancillary Parts VHL0-0A Matching Manual Valve mm Angled VHL0-0A Matching Manual Valve 0mm Angled VHL0-A Matching Manual Valve mm Angled VHL0-A-D Matching Manual Valve mm Angled Drain-off tailpiece VHL0-A-P Matching Manual Valve 0mm Pushfit Fittings Angled VHL0-A-DP Matching Manual Valve 0mm Pushfit Fittings Angled Drain-off tailpiece VHL0-0S Matching Manual Valve mm Straight VHL0-0S Matching Manual Valve 0mm Straight VHL0-S Matching Manual Valve mm Straight VHL0-S-D Matching Manual Valve mm Straight Drain-off tailpiece VHL0-S-P Matching Manual Valve 0mm Pushfit Fittings Straight VHL0-S-DP Matching Manual Valve 0mm Pushfit Fittings Straight Drain-off tailpiece EN0H-VA0GE R0

6 Radiator Balancing. SW.. Valves are supplied in the 'fully open' position. To start the Balancing setting, turn the insert dial clockwise until fully closed (mm wrench required) Note : Do not over tighten or damage may result Mark the start position on the brass insert Check the required setting using the chart below and turn the insert dial anti-clockwise until fully the number matches the mark on the insert. Example = setting Example = setting (fully open) max. max. DN angle DN straight INSERT SETTING POSITION. * V = 0 l/h ** p = mbar kv = 0. Insert setting = * given flow rate through radiator ** given differential pressure at radiator EN0H-VA0GE R0

7 Flow Diagram DN Straight 0, Setting kvs Flow Diagram DN Angle 0, Setting kvs Balancing setting Insert setting position = open = kvs kv-value (at p bar, m /h) = open = kvs Balancing setting Insert setting position kv-value (at p bar, m /h) Design flow Design flow P-Band K K K kv-value (at p bar, m /h) P-Band K K K kv-value (at p bar, m /h) Tolerances for Balancing Setting Values Tolerances for Balancing Setting Values % 0% % 0% % 0% % 0% % 0% % 0% Insert setting values Insert setting values EN0H-VA0GE R0

Accessories Part Number T00W0GB T0GB TGB TGB TGB HRUK V0-A V0-S Description White

Classic White / Chrome TRV upgrade head.

on any VHL0 'Manual' TRV bodies to convert them to a TRV Classic Brushed Chrome TRV

on any VHL0 'Manual' TRV bodies to convert them to an electronic TRV Valencia mm

replace TRV inserts, without the need to drain down the heating system (x ) VS00SLBB

Handwheels TA00A00 White Theft Protection Ring (x ) Honeywell Control Systems Ltd

com EN0H-VA0GE R0 October 0 0 Honeywell International Inc.

8 Accessories Part Number T00W0GB T0GB TGB TGB TGB HRUK V0-A V0-S Description White Traditional TRV upgrade head. on any VHL0 'Manual' TRV bodies to convert them to a TRV. Classic White / Chrome TRV upgrade head. on any VHL0 'Manual' TRV bodies to convert them to a TRV Classic Polished Chrome TRV upgrade head. on any VHL0 'Manual' TRV bodies to convert them to a TRV Classic Black / Chrome TRV upgrade head. on any VHL0 'Manual' TRV bodies to convert them to a TRV Classic Brushed Chrome TRV upgrade head. on any VHL0 'Manual' TRV bodies to convert them to a TRV White Evohome Electronic TRV upgrade head. on any VHL0 'Manual' TRV bodies to convert them to an electronic TRV Valencia mm Angled / Straight TRV replacement body only (x ) VA00A00 Service tool to clean or replace TRV inserts, without the need to drain down the heating system (x ) VS00SLBB Replacement valve (SLBB) integrated balancing insert (x ) H00-/A Pack of 0x Manual Handwheels TA00A00 White Theft Protection Ring (x ) Honeywell Control Systems Ltd Honeywell House Skimped Hill Lane Bracknell Berkshire RG EB EN0H-VA0GE R0 October 0 0 Honeywell International Inc. Subject to change All rights reserved Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sàrl, Ecublens, Route du Bois, Switzerland or its authorized representative.

V2000FS FS type TRV Body FINELY PRESETTABLE RADIATOR VALVE WITH FLUSH POSITION

V2000FS FS type TRV Body FINELY PRESETTABLE RADIATOR VALVE WITH FLUSH POSITION PRODUCT DATA Application 011 Angle to DIN Angle to NF Straight to DIN Straight to NF Thermostatic radiator valve bodies (TRV