Cleaning Tools & Supplies Catalog

Transcription

1 Tel: Cleaning Tools & Supplies Catalog Table of contents: Knot Wheel Brushes...Pages 1-2 Crimped Wire Wheel Brushes...Pages 3-5 Cup Brushes...Pages 6-8 Small Angular Grinder Brushes...Pages 9-11 Copper Center Wheel Brushes...Pages Stem Mounted Brushes...Pages Power & Hand Tube Brushes...Pages Flue & Boiler Brushes...Pages Brass Non-Scratching Brushes...Pages Cleaning & Application Brushes...Page 30 Hand Scratch Brushes...Pages Abrasive Nylon Filament Brushes...Pages Miscellaneous*...Pages * includes nylon scratch pads, surface conditioning discs, abrasive flap wheels, grinding/cutting discs, mandrels, adapters and more

2 Standard Knot Stem Mounted Knot Wheel Item Number Catalog Diameter Trim Face Max. Safe Free Stainless Number Inches Length Width Speed (RPM) Wire Size Arbor Hole SK-3 3" 1/2" 3/8" 5/8" SK-6 6" 5/8" 1/2" 1 3/8" 3/8" 25,000 SK-6 4" 1/2" 3/8" 7/8" 1/2" 20,000 1/2" 9, SKH-6 6" /8" 1/2" 1 1/4" 5/8" 9, SK-7 7" /8" 1/2" 1 7/8" 5/8" 9, SK-8 8" /8" 1/2" 1 5/8" 5/8" 6, SK-10 10" /4" 1 3/4" 3/4" 4, SK-12 12" /4" 2 3/4" 3/4" 3, Item Number Catalog Diameter Wire Trim Face Standard Number Inches Size Length Width Arbor SKM-3 3" 5/8" 3/8" 25, SKM-4 4" 7/8" 1/2" 20,000

3 Stringer Bead Item Number Catalog Diameter Wire Trim Face Max. Safe Free Stainless Number Inches Size Length Width Speed (RPM) SBA-4 4" /2" - 3/8" 7/8" 3/16" 20, M - 10 x M - 10 x M - 14 x /8" - 24 UNF /2" - 12 UNF /8" - 11 UNC permanently fastened nut SB 638 6" /8" /8" 3/8" 9,000 for faster changeovers (38 knots) SB 624 6" /8" - 1/2" 1 3/8" 1/2" 9, (24 knots) 5/8" SB 630 6" /8" /4" 1/2" 9,000 (30 knots) SB /8" 0.02 (56 knots) Arbor Hole 5/8" /8" 3/16" 9,000 Tight Knot permanently fastened nut for faster changeovers Item Number Catalog Diameter Wire Trim Face Max. Safe Free Stainless Number Inches Size Length Width Speed (RPM) Arbor Hole TK 4 4" /2" 3/8" 7/8" 1/4" 20, TK 6 6" /2" 5/8" 1 3/8" 3/8" 9, TK 8 8" /2" 5/8" 1 5/8" 1/2" 6, TK 10 10" /4"* 1 3/4" 1/2" 4, TK 12 12" /4"* 2 3/4" 7/16" 3,600 *With 5/16" x 5/32" double keyway Wide Face - double width brush for maximum coverage specify arbor hole size for metal adapters Item Number Catalog Diameter Wire Arbor Trim Face Max. Safe Free Number Inches Size Hole Length Width Speed (RPM) WSK-6 6" 2" 1 3/8" 7/8" 9, WSK-8 8" 2" 1 5/8" 1" 6,000 WSK-10 10" 2" 1 3/4" 1 1/4" 4,500

4 Item Number Catalog Diameter Wire Trim Face Standard Stainless Number Inches Size Length Width Arbor Hole Narrow Face Wheel Brushes PB-4 4" cleans rust, scale and dirt prepares surfaces prior to plating or painting can be mounted in multiples on a shaft to make a must always have a face plate on either end to cover specify arbor hole size PB-12 12" /8" 1/2" 1/2" PB-8 8" 1 13/16" 5/8" 5/8" PB-10 10" 2 1/2" 3/4" 3/4" 3 1/4" 3/4" 1 1/4" w/keyway* minimum order qty PB-15 15" /4" 3/4" 1 1/4" w/keyway *5/16" x 5/32" Double keyway *Also available in brass, nylon & natural fibre - contact Customer Service for details.

5 Heavy Duty Centre Narrow Face Item Catalog Diameter Wire Trim Face Standard Number Number Inches Size Length Width Arbor TLN-4 4" /8" 1/2" 1/2" TLN-6 6" /8" 1/2" 5/8" TLN-8 8" /2" 1/2" 5/8" no side plates required Medium Face Item Number Catalog Diameter Wire Face Standard Stainless Number Inches Size Width Arbor Hole for use on bench and pedestal grinders metal adapters included with each brush - specify MC MC-4 4" 1" 1 1/8" MC-6 6" 1" 2" 8" 1" 2" MC-10 10" /4" 2" MC-12 12" /4" 2" *Also available in brass, nylon & natural fibre - contact Customer Service for details

6 Wide Face Item Catalog Diameter Wire Face Standard Number Number Inches Size Width Arbor wider face width available on request MC-4 4" /4" 1 1/8" MC-6 6" /4" 2" MC-8 8" /2" 2" MC-10 10" /2" 2" MC-12 12" /2" 2"

7 Item Number Knot Type Single Row Catalog Diameter Wire Arbor Trim Stainless Number Inches Size Hole Length SKA-2 2 3/4" SKCA-3 3 1/2" 0.02 M10x1.25 7/8" M10x M14x /8" - 24 UNF /8" - 11UNC SKC-3 3 1/2" /8" - 11" 1 1/4" heavy duty cleaning of large metal surfaces SKC-4 4" /8"-11 7/8" 5/8" - 11" 1 3/8" removes weld scale and corrosion SKC-6 6" /8" - 11" 1 3/8" Knot Type Item Number Catalog Diameter Wire Arbor Trim - Double Row Stainless Number Inches Size Hole Length DKC-4B 4" /8"-11 7/8" DKC-6B 6" /8" 7/8" extra heavy duty provides greater surface coverage and longer life

8 Knot Type Item Number Catalog Diameter Wire Arbor Trim - Double Row Banded Number Inches Size Hole Length DKC-4B 4" /8"-11 7/8" DKC-6B 6" /8" 7/8" Crimped Wire Item Number Catalog Diameter Wire Arbor Trim Stainless Number Inches Size Hole Length CR-4 4" /8" /8" CR-5 5 1/2" /8"-11 1" CR-6 6" /8" /4" for medium and light duty application Abrasive Nylon Filament Filament Catalog Diameter Diameter Arbor Trim Item Number Number Inches & Grit Size Hole Length CRX-3 3 1/2".022/320 5/8" /2" / / CRX-6 6".022/320 5/8" /4" / /120 removes light oxide film from metal surfaces

9 Bronze Crimped Wire Catalog Diameter Wire Arbor Trim Item Number Number Inches Size Hole Length CR-4B 4" /l8" /8" CR-6B 6" /8" /4" non-sparking non scratching Maximum Safe Free Speed Brush Diameter R.P.M. For All Cup Brushes 2 3/4 " 3" 14, /2" 12,000 4" 9,000 5" 8,000 6" 6,000

10 Catalog Diameter Wire Arbor Trim Face Maximum Item Number Number Inches Size Hole Length Width Safe Free Stainless Speed (RPM) Knot Wheel SK-3 3" M-10x 5/8" 3/8" 25, M-10x / SK-4 4".014 M- 7/8" M M-14X /8" /2" /8"-11 1/2" 20,000 quick mounting constructed for perfect balance Stringer Bead Knot Wheel Catalog Diameter Wire Arbor Trim Face Maximum Item Number Number Inches Size Hole Length Width Safe Free very narrow face Stainless Speed (RPM) SBA-4 4" /2"-3/8" 7/8" M M M-14x /8" /2" /8"-11 *Features plastic snap-out adapter 3/16" 20,000

11 Crimped Wire Cup Catalog Diameter Wire Arbor Trim Maximum Item Number Number Inches Size Hole Length Safe Free Stainless Speed (RPM) CRA-2 3" M M M-14x /8" /2" /8" M heavy duty cleaning of large metal M- no vibration during use M-14x2.0 permanently fastened high profile /8" /2" /8"-11 7/8" 14,000 CRA-3 3 1/2" /8" 12,000 Knot Cup Item Number Catalog Diameter Wire Arbor Trim Stainless Number Inches Size Hole Length SKCA-2 2 3/4" M10 x 7/8" M10 x M14 x /8" /8" SKCA-3 3 1/2" 0.02 M10 x 7/8" M10 x M14 x 2.0 single row construction /8" 24 high impact action /8" 11

12 Crimped Wire Wheel Crimped Wire Bevel Reducing Adapters Item Catalog Diameter Wire Arbor Trim Face Maximum Number Number Inches Size Hole Length Width Safe Free Speed (RPM) TLNA-4 4" M10- x M-10 x M-14 x /8" -24 UNF /2" 13 UNC /8" 11 UNC 7/8" 1/2" 14,000 Item Catalog Diameter Wire Arbor Trim Face Maximum Number Number Inches Size Hole Length Width Safe Free Speed (RPM) BV-3 3 3/8" M-10-x1.25 1/2" M-10x M-14x /2"-13 UNC /8"-11 UNC 1/2" 12,500 Item Fixed Adapted Number Thread Size Thread Size /8" 11 UNC M 10 x /8" 11 UNC M 10 x /8" 11 UNC 3/8" - 16

13 Hi Speed Wheel Brushes - Wire Fill Catalog Diameter Item Number Number Inches Wire Arbor Trim Face Stainless Size Hole Length Width C-1 1" /4" 7/32" 3/16" C-1 ¼ 1 1/4" 1/4" 11/32" 1/4" C-1 3/8 1 3/8" /4" 11/32" 1/4" C-1 ½ /8" 7/16" 1/4" C-2 2" /2" 1/2" 3/8" wide range of deburring uses removes rust, scale and carbon cleans threads & boiler tubes widely ised in aerospace and nuclear work C-2 ½ 2 1/2" /2" 3/4" 3/8" C-3 3" /2" 1" 1/2" /2" 1" 1/2" /8" 15/16" 1/2" /2" 1" 1/2" /8" 15/16" 1/2" /2" 1" 1/2" /2" 1" 1/2" /2" 1" 1/2" /8" 15/16" 1/2" C /8" 1 7/16" 1/2"

14 Brass Wire Wheels Catalog Diameter Wire Arbor Face Maximum Item Number Number Inches Size Hole Width Safe Free Brass Wire Speed (RPM) C-2 2" /2" 3/8" 20, C-3 3" /2" 1/2" 20, non scratching and sparking cleans molds, dies and extruder barrels Plastic Adapters Item Catalog Fixed Adapted Number Number Arbor Hole Arbor Hole PA 84 1/2" 1/4" PA 86 1/2" 3/8" PA 108 5/8" 1/2" PA 64 3/8" 1/4" heavy duty cleaning of large metal surfaces no vibration during use permanently fastened high profile nut Crimped Nylon Wheels Item Catalog Filament Arbor Arbor Trim Face Number Number Diameter Hole Hole Length Width CN-1 1/2 1/2" /8" 11/32" 1/4" CN-2 2" /2" 1/2" 3/8" CN-2 1/2 2 1/2" /8" 11/16" 5/16" CN-3 3" /2" 1" 1/2" cleans and polishes I.D. surfaces

15 Abrasive Nylon Item Catalog Filament Arbor Arbor Trim Face - Silicon Carbide Number Number Diameter & Hole Hole Length Width Grit CY-1 3/8 1 3/8".018/500 1/4" 11/32" 1/4" CY-1 1/2 1 1/2".035/180 1/2" 1/4" 5/16" CY-2 2".018/500 1/2" 1/2" 3/8" / / CY-2 1/2 2 1/2".022/320 5/8" 11/16" 5/16" CY-3 3".035/180 1/2" 1" 1/2" /120 1/2" 1" 1/2" deburrs edges on aluminum extrusions and fabricated metals Encapsulated Wire Crimped Wire Wheels Item Number Catalog Diameter Wire Arbor Trim Face - Burgundy Elastomer (Standard) Number Inches Size Hole Length Width C-2E 2" /2" 1/2" 1/4" C-3E 3" 1/2" 1" /4"

16 Reusable Drive Arbors Item Fixed Arbor Stem Stem Shaft Used for Number Thread Size Diameter Diameter Length Length Brushes with a Max. Diam. of SA-1 1/2" 3/4" SA-2 3/8" 3/4" SA-3 1/2" 1 1/4" 1/4" 3/4" 4" AU-1 1/2" 1/4" 7/8" 3/4" 4" AU-2 3/8" 1 1/8" 3/16" 4" AU-3 1/4" 1 1/8" 3/16" 2" for use in portable tools and drill presses accomodates 1/4, 3/8 or 1/2 inch arbor holes

17 Catalog Diameter Wire Trim Face Maximum Item Number Number Inches Size Length Width Safe Free Stainless Speed (RPM) Narrow Face Crimped Wire Wheels CFN-2 2" /2" 3/8" 20, CFN-2 1/2" 2 1/2" /4" 3/8" 20, CFN-3 3" " 3/8" 20, designed for use on portable tools and drill especially suitable for brushing confined area Wide Face Crimped Wire Wheels Catalog Diameter Wire Trim Face Maximum Item Number Number Inches Size Length Width Safe Free Stainless Speed (RPM) CFW-1 1/4 1 1/4" 3/8" 1/2" 20,000 CFW-1 ½ 1 1/2" 1/2" 1/2" CFW-1 ¾ 1 3/4" /8" 1/2" 20,000 - ideas for internal pipe cleaning CFW-2 2" /16" 3/4" 20, CFW-2 1/2" 2 1/2" /16" 3/4" 20,000 20, CFW-3 3" /16" 3/4" ,000

18 Circular Flared End Brush Catalog Diameter Wire Maximu Item Number Number Inches Size Safe Stainless Speed FE-1 ¼ 1 1/4" 20,000 FE-1 ½ 1 1/2" 20,000 FE-3 3" 14,000 will effectively clean cavity walls without scoring bottom quickly installs in chuck or collet Crimped Wire Cup Brushes Catalog Diameter Wire Trim Maximu Item Number Number Inches Size Length Safe Stainless Speed SC-1 3/4 1 3/4" /4" 13, SC-2 3/4 2 3/4" /8" 6, perfect for die mold and tool cleaning brush flare lets you reach into corners

19 Solid End Brushes Catalog Diameter Wire Trim Maximu Item Number Number Inches Size Length Safe Stainless Speed SE-1/2 1/2" for cleaning and finishing recessed areas effective for I.D. pipe cleaning available with protective plastic coating " 25,000 SE-3/4 3/4" 1" 22,000 SE-1 1" 1" 22,000 Extension Holder Catalog Overall Item Number Number Length EX-6 6" for all 1/4" stem brushes Knot Wire Wheels Standard Twist Item Number Catalog Diameter Wire Trim Face Maximu Number Inches Size Length Width Safe Speed SKM-3 3" /8" 3/8" 25, SKM-4 4" /2" 7/8" 20,

20 Knot Type End Brushes Catalog Diameter Wire Trim Maximu Item Number Number Inches Size Length Safe Stainless Speed KE-3/4 3/4" /8" 20, KE-1 1" /8" 20, KE-1 1/8 1 1/8" /8" ,000 concentrated knots of wires prevent brush from splaying out at high speeds Pilot Bonding Brushes Catalog Diameter Wire Trim Pilot Maximu Item Number Number Inches Size Length Diameter Safe Stainless Speed EP-3 1/2" /8" 3/32" EP-4 1/8" EP-5 5/32" used for cleaning paint and rust from around EP-6 3/16" bolt or rivet holes used extensively in the aerospace industry EP-7 1/4" 20,000

21 Item Number Catalog Diameter Brush Fill Stem Overall Stainless Number Inches Part Diameter Diameter Length Single Stem Power Tube Brushes BU ¼ 1/4" " 1/8" 3 1/2" BU 5/16 5/16" " 1/8" 3 1/2" BU 3/8 3/8" " 1/8" 3 1/2" BU 7/16 7/16" " 1/8" 3 1/2" BU ½ 1/2" " 3/16" 3 1/2" BU 5/8 5/8" " 3/16" 3 1/2" BU 5/8 5/8" " 3/16" 3 1/2" BU ¾ 3/4" " 7/32" 3 1/2" BU 7/8 7/8" " 7/32" 3 1/2" BU 1 1" " 1/4" 3 1/2" BU 1 1/8 1 1/8" " 1/4" 3 1/2" BU 1 ¼ 1 1/4" " 1/4" 3 1/2" Double Stem Power Tube Brushes Item Number Catalog Diameter Brush Fill Stem Overall Stainless Number Inches Part Diameter Diameter Length DS-1/4 1/4" /2" 1/8" 4" DS-3/8 3/8" 1 1/2" 1/8" DS-1/2 1/2" 2" 5/32" 5" DS-5/8 5/8" 2" 7/32" DS-3/4 3/4" 2 1/2" 1/4" 5 1/2" DS-7/8 7/8" /2" 1/4" 5 1/2" DS-1 1" /2" 1/4" 5 1/2" DS-1 1/8 1 1/8" /2" 1/4" 5 1/2" DS-1 ¼ 1 1/4" /2" 1/4" 5 1/2" DS-1 3/8 1 3/8" /2" 1/4" 5 1/2" DS-1 ½ 1 1/2" /2" 1/4" 5 1/2" 4" 5"

22 High Density Side-Action Tube Brush Item Number Catalog Diameter Brush Fill Stem Overall Stainless Number Inches Part Diameter Diameter Length BR-1/4 1/4" /16" 3/32" 2 1/8" BR-3/8 3/8" /16" 3/32" 2 1/8" BR-7/16 7/16" /16" 3/32" 2 1/8" BR-1/2 1/2" /8" 3/32" 2 1/4" BR-9/16" 9/16" /8" 1/8" 2 1/4" BR-5/8 5/8" /8" 1/8" 2 1/4" BR-3/4 3/4" /8" 1/8" 2 1/4" BR-1 1" /8" 1/8" 2 1/4" BR-1 ¼ 1 1/4" /8" 1/8" 2 1/4" Side Action Brush Holders Catalog For Brush Holder Overall Shank Item Number Number Stem Diameter Diameter Length Diameter CR-4B 4" /l8" /8" CR-6B 6" /8" /4" for use with side action brushes

23 Single Stem Hand Brushes Nylon Tube Brushes Item Number Catalog Diameter Brush Fill Stem Overall Stainless Number Inches Part Diameter Diameter Length STS-1/8 1/8" " 3/32" 6" STS-3/16 3/16" /2" 3/32" 7" STS-1/4 1/4" /2" 3/32" 7" STS-5/16 5/16" /2" 3/32" 7" STS-3/8 3/8" " 1/8" 8" STS-7/16 7/16" " 1/8" 8" STS-1/2 1/2" " 1/8" 8" STS-9/16 9/16" /2" 5/32" 9" STS-5/8 5/8" /2" 5/32" 9" STS-3/4 3/4" /2" 5/32" 9" STS-7/8 7/8" " 3/16" 10" STS-1 1" fFF" 3/16" 10" STS-1 ¼ 1 1/4" " 3/16" 12" STS-1 ½ 1 1/2" " 3/16" 12" Item Number Catalog Diameter Brush Fill Stem Overall Number Inches Part Diameter Diameter Length NN-28 1/4" 2" /32" 6 1/4" NN-38 3/8" 2" /32" 6 1/4" NN-48 1/2" 3" /8" 8 1/2" NN-68 3/4" 3" /8" 8 1/2" NN-88 1" 4" /32" 12 1/4" NN /4" 4" /32" 13" NN-168 2" 5" /32" 16 3/4"

24 Item Catalog Brush Brush Overall Flue Brushes Number Number Diameter Length Length BT ¾ 3/4" 4 1/2" 8" BT 1 1" 4 1/2" 8" BT 1 ¼ 1 1/4" 4 1/2" 8" BT 1 ½ 1 1/2" 4 1/2" 8" BT 1 ¾ 1 3/4" 4 1/2" 8" BT 2 2" 4 1/2" 8" BT 2 ¼ 2 1/4" 4 1/2" 8" fitted with.012 round wire and 1/4" N.P.T nipple BT 2 ½ 2 1/2" 4 1/2" 8" double spiral construction BT 2 ¾ 2 3/4" 4 1/2" 8" 4 foot fibreglass extention rods available BT 3 3" 4 1/2" 8" BT 3 ¼ 3 1/4" 4 1/2" 8" BT 3 ½ 3 1/2" 4 1/2" 8" BT 3 ¾ 3 3/4" 4 1/2" 8" BT 4 4" 4 1/2" 8" BT 4 ¼ 4 1/4" 4 1/2" 8" BT 4 ½ 4 1/2" 4 1/2" 8" BT 4 ¾ 4 3/4" 4 1/2" 8" BT 5 5" 4 1/2" 8" BT 6 6" 4 1/2" 8" 4-in-1 Tube and Fitting Brushes Item Catalog Tube Inside Tube Outside Number Number Diameter (I.D) Diameter (O.D) FO-1 3/4" & 1/2" 7/8" & 5/8" cleans inside and outside diameter of 1/2" and 3/4" tubes and fittings

25 Copper Tube Fitting Brushes Item Catalog Tube Actual Brush Overall Number Number Diameter Diameter Length Length CF-18 1/8" 1/4" 1" 6 1/2" CF-28 1/4" 3/8" 1" 6 1/2" CF-38 3/8" 1/2" 1" 6 1/2" CF-48 1/2" 5/8" 1" 6 1/2" used for internal cleaning & deburring of copper fittings CF-58 5/8" 3/4" 1" 6 1/2" CF-68 3/4" 7/8" 1" 6 1/2" CF-88 1" 1 1/8" 1" 6 1/2" O.D. Cleaning Brushes Item Catalog Tube Inside Tube Outside Number Number Diameter (I.D) Diameter (O.D) OC-1/4 1/4" 3/8" OC-3/8 3/8" 1/2" OC-1/2 1/2" 5/8" OC-5/8 5/8" 3/4" OC-3/4 3/4" 7/8" OC-7/8 7/8" 1" OC-1 1" 1 1/8"

26 Bench Grinder Wheel Brushes Catalog Diameter Wire Face Standard Maximum Item Number Number Inches Size Width Arbor Hole Safe Free Brass Wire Speed (RPM) PB-6 6" /2" 1/2-5/8" 4, Narrow Face Medium Face MC-6 6" 3/4" 2"* *Refer to metal adaptor table 4,000 for use on table-top and pedestal grinders safely removes material from dies Stem Mounted Wheel Brushes Catalog Diameter Wire Face Maximum Item Number Number Inches Size Width Safe Free Brass Wire Speed (RPM) CFN-2 2" 3/8" 20, CFN-3 3" /8" 20,000 cleans extruder screws and barrels without scratching

27 Copper Centre Hi-Speed Wire Wheel Brushes Catalog Diameter Wire Face Standard Maximum Item Number Number Inches Size Width Arbor Hole Safe Free Brass Wire Speed (RPM) C-2 2" 1/2" 3/8" 20, C-3 3" 1/2" 1/2" 20,000 non scratching and sparking used with drive shanks Stem Mounted Solid End Brushes Item Number Catalog Diameter Wire Trim Brass Wire Number Inches Size Length SE-1/2 1/2" " SE-3/4 3/4" " SE-1 1" " provides effective cleaning in recessed mold cavities Hand Scratch Brushes Item Number Catalog Wire Number Block Brush Trim Brass Wire Number Size of Rows Size Part Length G-8138-B X7 7 7/8"X1/2 1 3/8" 1/2" G-8148-B X9 8 5/8" X 1/2 2 1/4" 5/8" TC X9 8 1/2"x 2 2 1/2" 5/8" G X16 10" X 1 1/8" 5" 1" G X16 10" X 1 1/8" 5" 1" B X20 10" X 1 1/8" 5 1/4" 1" smooth maple hardwood handles ideal for plating, metal finishing and aircraft industries

28 Hand Tube Brushes Item Number Catalog Diameter Length Brush Stem Overall Brass Wire Number Inches Part Diameter Length STS 1/4 1/4" 2" 3/32" 7" STS 5/16 5/16" 2" 1/8" 7" STS 3/8 3/8" 2 1/2" 1/8" 8" STS 1/2 1/2" 2 1/2" 1/8" 8" STS 5/8 5/8" 3" 1/8" 10" STS 3/4 3/4" 3" 1/8" 10" STS 1 1" 3" 1/8" 10" crimped wire fill with non-scratching twisted brass stem STS 1 1/4 1 1/4" 3 1/2" 1/8" 10" fan tip allows cleaning of blind holes Brass Flue Brushes Item Number Catalog Brush Brush Overall Brass Wire Number Diameter Length Length BT 1 1" 4 1/2" 8" BT 2 2" 4 1/2" 8" BT 3 3" 4 1/2" 8" BT 4 4" 4 1/2" 8" BT 5 5" 4 1/2" 8" BT 6 6" 4 1/2" 8" cleans extruder barrels without scratching 4 foot fibreglass extension rods available

29 Miniature Wheel Brushes Catalog Diameter Wire Trim Stem Maximum Item Number Number Inches Size Length Size Safe Free Brass Stainless Speed (RPM) MW /4" /8" 1/8" 25,000 - MW-12 3/4" /16" 3/32" 25,000 wide usage in electronic miniature instrumentation MW-16 1" /16" 3/32" 25,000 MW-12 MW-16 1" 3/4" /16" 1/8" 25, /16" 1/8" 25,000 Miniature End Brushes Catalog Diameter Wire Trim Stem Maximum Item Number Number Inches Size Length Size Safe Free ideal for tool and die work Stainless Speed (RPM) Brass ME-869 3/16" /4" 1/8" 25, ME-879 3/16" Jan 1/8" 25, ME-872 1/4" /16" 1/8" 25, ME-882 1/4" /16" 1/8" 25, ME-982 5/16" /16" 1/8" 25,000

30 Miniature Cup Brushes Catalog Diameter Wire Trim Stem Maximum Item Number Number Inches Size Length Size Safe Free Brass Stainless Speed (RPM) MEC-10 5/8" /4" 1/8" 25,000 for use in high speed grinders Square End Brushes Catalog Square Overall Wire Item Number Diameter Length Size Number provides simultaneous side and bottom action SQ-1 1" 3 5/8" SQ-1 1/16 1 1/16" 3 21/32" SQ-1 1/4 1 1/4" 3 3/4" SQ-1 1/2 1 1/2" 3 15/16" SQ-1 3/4 1 3/4" 4" SQ-1 7/8 1 7/8" 4 1/16" Maximum Safe Free Speed (RPM) 4,500 4,500 4,500 4,500 4,500 4,500 Pencil End Brushes Item Catalog Diameter Wire Trim Overall Number Number Inches Size Length Length PE-1/4" 1/4" /8" 3 3/8" effectively cleans recesses and corners

31 Acid Brushes Item Catalog Overall Trim Number Number Width Length Length black horsehair fill, tin ferrule AB-0 1/4" 5 1/4" 3/4" AB-1 3/8" 5 1/4" 3/4" AB-2 1/4" 5 1/4" 3/4" AB-3 9/16" 5 1/4" 3/4" Chip and Oil Brushes Item Catalog Trim Number Number Width Length inexpensive, multi-purpose brushes for use in applications requiring disposable brushes CB-1 1/2" 1 3/4" CB-2 1" 1 3/4" CB-3 1 1/2" 1 3/4" CB-4 2" 1 3/4" CB-5 3" 1 3/4" CB-6 4" 2" Parts Cleaning Brushes Item Catalog Fill Diameter Trim Number Number Material Inches Length seamless steel ferrule heavily filled, chisel trim PC-1 NYLON 1" 2 3/4" PC-2 TAMPICO 1" 2 3/4" Metal Chip Brushes Item Catalog Fill Wire Face Overall Number Number Material Length Width Length CW STEEL 1 1/2" 1 1/4" 5 1/2" small stiff wire brush for brushing hot metal

32 Curved Handle Catalog Fill Number Block Brush Trim Item Number Number Material of Rows Size Part Length HC.012 STEEL 3X20 14"X1" 5 1/2" 1 3/16" SS.012 STAINLESS 3X20 14"X1" 5 1/2" 1 3/16" HC.012 STEEL 4X20 14"X1 1/4" 5 1/2" 1 3/16" SS.012 STAINLESS 4X20 14"X1 1/4" 5 1/2" 1 3/16" smooth maple hardwood handles bristles are staple-set with oil tempered hardened steelor stainless steel Platers Brushes Catalog Fill Number Block Brush Trim Item Number Number Material of Rows Size Part Length T TAMPICO 4X20 12"X1 1/4" 5 1/2" 1 3/16" T TAMPICO 6X16 8"X2 3/4" 7 1/2" 1 1/8" G BRASS 4X16 10"X1 1/8" 5" 1 3/16" G BRASS 4X16 10"X1 1/8" 5" 1 3/16 used for general cleaning in the plating, metal finishing and aircraft industries Shoe Handle Catalog Fill Number Block Brush Trim Item Number Number Material of Rows Size Part Length HC.012 STEEL 4X18 10"X1 1/8" 5" 1 3/16" SS.012 S.S. 4X18 10"X1 1/8" 5" 1 3/16" use for removing rust, scale solder and cleaning threads, files and metal parts

33 Scraper Type Item Number Catalog Number Number Brush Trim.016 Number of Rows of Rows Part Length SC-41 4 x /2" x 1 5 1/2" 1 1/2" straight handle with scraper attached Small Hand Wire Scratch Brushes Catalog Fill Number Number Brush Trim Item Number Number Material of Rows of Rows Part Length G8138-SS STAINLESS 3x7 7 7/8"x1/2" 7 1 3/8" 1/2" G8138-B BRASS 3x7 7/8"x1/2" 7 1 3/8" 1/2" G8138-N NYLON 3x7 7/8"x1/2" 7 1 3/8" 1/2" G8138-HH HORSE HAIR 3x7 7/8"x1/2" 7 1 3/8" 1/2" GP8138-N* NYLON 3x7 7/8"x1/2" 1 3/8" 1/2" G8148-SS STAINLESS 2x9 8 5/8"x1/2" 8 2 1/4" 5/8" G8148-B BRASS 2x9 5/8"x1/2" 2 1/2" 5/8" "Toothbrush" style cleaning brushes UT-45* NYLON 4x15 6 1/2"x1/2" 1 3/4" 1/2" rugged hardwood or plastic handles * With plastic handle Tire Cleaning Brush Catalog Fill Number Block Brush Trim Item Number Number Material of Rows Size Part Length TC Brass 8 x 9 8 1/2" x 2 1/2" 2 1/2" 5/8" plastic block with hang hole Counter Dusters Catalog Fill Brush Trim Item Number Number Material Part Length waxed hardwood block used for file cleaning also used to roughen and prepare surfaces prior to soldering BB-2 TAMPICO 7" 2 1/4" BB-48 SOFT HAIR 7" 2 1/4"

34 Wire Block Brushes Catalog Number Block Brush Trim Number of Rows Size Part Length Item Number HC 6x19 7 1/4"x2 1/4" 7" 1 5/8" BL-1 1/2" 5x10 7 1/2"x2 3/4" 7" 1 1/2" used for rugged cleaning of bricks, stone and File Card Brushes Catalog Fill Brush Trim Overall Item Number Number Material Part Length Length STEEL 1 5/8"x4" 1/4" 8 1/4" waxed hardwood block used for file cleaning also used to roughen and prepare surfaces prior to soldering

35 Large Diameter Wheel Brushes Catalog Diameter Abor Filament Trim Arbor Maximum Item Number Number Inches Hole Diameter Length Thickness Safe Free Grit Size Speed (RPM) NY-6 6" 2".022/ / / NY-8.022/ / /120 8" 2" 2 1/2" 9/16" 1 1/2" 9/16" 6,000 5,000 deburrs and rounds off edges on aluminum extrusions lowers microfinish on scratch or matte finishes surfaces specify arbor hole size Narrow Face Wheels ( Hub) Item Number Catalog Diameter Abor Filament Trim Arbor Maximum Number Inches Hole Diameter Length Thickness Safe Free Grit Size Speed (RPM) TLN-3 3" 1/2"-3/8"*.022/ / / TLN-4 4".022/ / /120 *Features plastic snap-out arbor hole adapter 1/2" 13/32" 6,000 1/2"-3/8"* 7/8" 13/32" 6,000 Small Diameter Wheels (Copper Centre) Item Number Catalog Diameter Abor Filament Trim Arbor Maximum Number Inches Hole Diameter Length Thickness Safe Free Grit Size Speed (RPM) CY-1 ½ 1 1/2" 1/2".035/180 1/4" 3/8" 20, CY-2 2" 1/2".018/500 1/2" 3/8" 20, / / CY-3 3" 1/2".035/180 1" 1/2" 20, /120

36 Cup Brushes Item Number Catalog Diameter Abor Filament Arbor Maximum Number Inches Hole Diameter Thicknes Safe Free Grit Size Speed UC /4" 1/4" Stem.022/ /4" 6, / / CR-3 3 1/2" 5/8" / /2" 12, / / CR-6 6" 5/8" / /4" 6, / /120

37 Hand Pads Item Number Size Grain Grit Color " x 9" Silicon Fine Grey Carbide Medium Maroon Coarse Tan made of a non-woven nylon material impregnated with abrasive grit bonded with synthetic resins for fine finishing and light cleaning of metal, plastic, fiberglass and wood surfaces Surface Conditioning Discs Diameter Maximum Inches Safe Free Speed Item Number Grit /2" Medium Coarse Medium Coarse Medium Coarse Medium for use on portable right angle grinders and die Coarse constructed from heavy duty non-woven nylon, impregnated with abrasive, with a tough reinforced scrim backing designed for use on steel, stainless steel and available in standard hook and loop mounting systems Grit Colors Maroon Medium Grit Brown Course Grit 25,000 2" 23,000 3" 20,000 4" 18,000

38 Drive Holders (Medium Density) Maximum Item Number Size Speed (RPM) /2" x 1/4" 25, " x 1/4" shank 23, " x 1/4" shank 20, " x 1/4" shank 18,000 for Hook & Loop Style Discs Mounted Flap Wheels Diameter Grit Maximum Inches Size Safe Free Item Number Diameter Width Speed (RPM) CA-1 1" 1" 60 30, CA-1 1/2 1 1/2" 1" 60 25, CA-2 2" 1" 25, mounted on 1/4" Shank final finish on metal surfaces deburring - flash removel on machined parts blending and finishing of dies, molds, tools, tubing, channels, etc. CA-2 1/2" 2 1/2" 1" 23, CA-3 3" 1" 60 23,

39 Unmounted Flap Wheels Diameter Arbor Grit Maximum Inches Hole Size Safe Free Item Number Diameter Width Speed (RPM) CA-4 4" 1" 5/8" 50 9, CA-6 6" 1" 1" 50 6, CA-6 6" 2" 1" 6,000 Aluminum Oxide - Resin Bond Cloth Metal Adapters Item Number Fixed Arbor Adapted Size " 1/2" " 5/8" " 3/4" for unmounted flap wheels used in pairs

40 Zirconium Diameter Arbor Grit Maximum Surface Item Number Inches Hole Size Safe Free Feet Per high-performance metal grinding for stainless steel, tool steel and hard to grind materials Aluminum Speed (RPM) Minute (SFM) Oxide Zirconium " 5/8" all purpose grinding - metals, plastic, wood and Aluminum Oxide " 7/8" 16 11,900 15, weld smoothing and cleaning " 7/8" 16 8,550 15,600 all purpose grinding - metals, plastic, wood and ,900 15, /2" 7/8" 13,200 15,600

41 Resin Fibre Disc Accessories Item Number Description Thread Size " Backing Pad SPECIFY /4" Backing SPECIFY " Backing Pad SPECIFY " Backing Pad 5/8" Spanner Disc Nut 5/8" - 11 Trim-Kut Grinding Discs Diameter Grit/Grain Color Maximum Item Number Inches Size Code Safe Free "Trim-Down" feature allows the disc edge to be trimmed while on the tool removes paint, rust and corrosion from all metal, wood and fibreglass surfaces stock removal of metal, wood and fibreglass materials Aluminum Speed Oxide " 36 Red 28, Orange Green Super Fine Surface Prep " 36 Red 16, Orange Green Super Fine Surface Prep Trim-Kut Adaptors Item Number Description Thread Size TK-Mandrel 1/4" Mandrel TK-Adapter 3/8"-24 UNF TK-Adapter 5/8"-11 UNC TK-Adapter M-10 x TK-Adapter M-10 x TK-Adapter M-14 x TK-Adapter 1/2"-13 UNC

42 Flap Discs Diameter Arbor Grit Maximum Item Number Inches Hole Size Safe Free aluminum oxide and zirconium abrasive grain with phenolic resin backing plate designed and balanced for easy transition from high speed grinding to detail blending and finishing, by simply adjusting the grinding angle and work pressure Aluminum Speed (RPM) Oxide Zirconium /2" 7/8" ,000 7" 7/8" 8,600