Industrial Cylinder Products. Pneumatic & Hydraulic Cylinders

Transcription

1 aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Industrial ylinder Products Pneumatic & Hydraulic ylinders

2 In line with our policy of continuing product improvement, specifications and information contained in this catalog are subject to change. opyright 00-0 by Parker Hannifin orporation. ll rights reserved. PINTD IN TH U.S.. WNIN FILU O IMPOP SLTION O IMPOP US OF TH PODUTS ND/O SSTMS DSIBD HIN O LTD ITMS N US DTH, PSONL INJU ND POPT DM. This document and other information from the Parker Hannifin orporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having expertise. It is important that you analyze all aspects of your application, including consequences of any failure and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin orporation and its subsidiaries at any time without notice. Offer of Sale The items described in this document are hereby offered for sale by Parker Hannifin orporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by provisions stated on a separate page of the document entitled Offer of Sale.

3 atalog SB00- Table of ontents Pneumatic & Hydraulic ylinders Introduction Table of ontents Page Section Manufacturing Locations II Introduction Section : Pneumatic ylinders Pneumatic ylinder Index P- Series Heavy Duty Pneumatic ylinders (Series odes P & PB) - PN Series Non-Lube ylinders (Series odes PN & PP) - 0 N Series Pneumatic ylinders (Series odes F, FB, N & NB) - od Lock Pneumatic ylinders -0 How To Order N Series with od Lock (Series odes FJ, FBJ, NJ & NBJ) 0 How To Order P- Series with od Lock (Series odes PJ, PBJ, PNJ & PPJ) 0-0 Section B: Hydraulic ylinders Hydraulic ylinder Index PL- Series Medium Duty Hydraulic ylinders (Series odes PL, PM, P & P) - PH- Series Heavy Duty Hydraulic ylinders (Series odes PH, PJ, PF, PH, PX & P) - PH- Series Heavy Duty Hydraulic ylinders (Series odes PH, PJ, PF, P, PX & P) - PHX Series Hydraulic and lectrohydraulic ctuators - SHM Series Metric Hydraulic ylinders - Series H/HD ompact Hydraulic ylinders - Section : pplication ngineering pplication ngineering Index ustom Modifications and Innovations - ylinder Parts Identification and Seal it Data - pplication ngineering Data - 0 ylinder Safety uide 0-0 Offer of Sale IB B I

4 atalog SB00- Manufacturing Locations Pneumatic & Hydraulic ylinders Introduction Manufacturing Locations egional Plants alifornia Helicopter ircle orona, 0 Tel.: () 0-00 Fax: () 0-0 Fax: (00) - onnecticut 0 Shaker oad nfield, T 00 Tel.: (0) - Fax: (00) -00 eorgia 00 Six Flags oad Lithia Springs, 0 Tel.: (0) -00 Fax: (00) - Indiana oodland Plant South Iroquois Street oodland, IN Tel.: () - Fax: (00) -0 Michigan 00 Plymouth oad Plymouth, MI 0 Tel.: () -00 Fax: () -00 Oregon irport oad ugene, O 0-00 Tel.: -- Fax: -- Fax: 00-- II

5 atalog SB00- Section Overview Pneumatic ylinders Section Pneumatic ylinders P- Series...Page Series codes P, PB, PN & PP Heavy duty service with industrial tie rod construction Nominal pressure up to 0 PSI Standard bore sizes " - " standard mounting styles N Series Ford Motor ompany...page Series codes F, FB, N & NB Medium duty service with industrial tie rod construction Nominal pressure up to 0 PSI Standard bore sizes /" - " 0 Ford approved mounting styles dditional mounting styles available P- N od Lock N & P- Series with od Lock...Page Series codes PJ, PBJ, PNJ & PPJ Holding forces to resist up to 00 psi input from cap end Standard bore sizes /" - " Manual release is standard NM X rating protects internal components

6 Pneumatic ylinders P- and N Series Industrial ylinders are designed to meet your application requirements with quality and reliability built-in. P- Series Bolt-on bronze rod gland cartridges in P- and N Series ylinders are easily removed for service without cylinder disassembly. The double-lip wiperseal cleans the rod surface and the rod seal provides positive non-leak sealing and minimum friction. Floating ushion Bearings are designed to provide smooth cushion action from start to stop without binding an adjustable needle valve allows uniform range of cushion control. ushions are optional and can be supplied at either or both ends. Piston od Lock option for N & P- Series addresses the need to prevent unwanted actuator movement during machine service. Several industries eliminated the use of stored energy to restrain actuators, which makes our piston od Lock an important machine design component. N Series P- and N Series cylinders are available in a wide selection of bore sizes and mounting styles and are NFP dimensionally interchangeable with other comparable cylinders. J.I.T. Delivery P- and N Series cylinders are available from your local distributor and are shipped from our strategically located regional manufacturing plants to save you freight costs and ensure J.I.T. delivery when you want it! To order P- or N Series ylinders or for sizing and application assistance contact your local distributor. To find a distributor in your area visit the Schrader Bellows web site at od Lock for N and P- egistered Trademark,

7 P- P- Series Heavy-Duty Industrial Tie od Pneumatic ylinders od Lock N ontents Features... Specifications / Mountings / Ordering Notes... Design Features / djustable Floating ushions... - Mounting Information... - ylinder ccessories..., 0- Double od Models... Style Piston od nd... - How to Order... - PN Series Non-Lube... -0

8 P- Series Heavy Duty ir ylinder When the job calls for reliable, heavy-duty performance, specify P- Series. 00,000 psi yield strength chrome-plated, case-hardened piston rod.,000 psi yield strength rod-end stud with rolled threads. 00,000 psi yield strength tie rods. With construction like this, the P- Series is rated for air service to 0 psi. This is one heavy-duty air cylinder that s really heavy duty. They re truly premium quality cylinders, factory prelubricated standard with a non-lube option for millions of maintenance-free cycles. nd to make sure every cylinder is premium quality, we subject each and every one not just batch samples to tough inspection and performance tests. See inside for the inside story on all the features that make P- Series the high performance, long lasting choice for all your heavy-duty air applications. Note: od diameters over /" will use a threaded nose gland.

9 P- atalog SB00- Specifications / Mounting Styles Heavy-Duty Pneumatic ylinders P- Series Standard Specifications Heavy Duty Service NSI/(NFP) T..-00 Specifications and Mounting Dimension Standards Standard onstruction Square Head Tie od Design Nominal Pressure Up to 0 psi ir Service Standard Fluid Filtered ir Standard Temperature -0 F. to + F.* Bore Sizes " through " Piston od Diameter /" through /" In line with our policy of continuing product improvement, specifications in this catalog are subject to change. vailable in all bore and rod combinations. Side Lug Mounting Styles and Ordering Notes Mounting Styles standard styles at various application ratings Strokes vailable in any practical stroke length ushions Optional at either end or both ends of stroke. Float heck at cap end. od nds Three Standard hoices Specials to Order * See Section, Operating Fluids and Temperature ange for higher temperature service. vailable in all bore and rod combinations through " bore. "-" bores supplied as Head Square (M) and ap Square (M) mounts. Head ectangular Flange ap ectangular Flange MS Side Tap Tie ods xtended Both nds MF Head Square Flange MF ap Square Flange od Lock N MS Both nds MX ap nd MX Head nd MX MF MF Trunnion Mounts Head MT ap MT Intermediate Fixed MT MPU MP Spherical Bearing Double nd onstruction ap Fixed levis Pivot Pin Included vailable in all bore and rod combinations in the following mounting styles: MDS, MDS, MDX, MDX, MDT, MDT, and MDF ("-"). MDF ("-") and MD ("-"). od Bearing artridges = emovable artridge T = Tie od etained artridge *MF, MF, MF, MF not available in these bore sizes. Bore / / * * 0* * * od Dia. /,,,, / - /, / - / -,, - /, / - / - / / - / MX MX MX MS MS MF MF MT MT MT MPU MP T T T T T T T MF MF T T T T T T T T T T T T N/ N/ N/ N/ N/ N/ M M N/ N/ N/ N/ N/ N/ N/ N/ N/ N/ N/ N/ N/ N/ N/ N/ N/ N/ N/ N/ N/

10 The inside story on why P- Series is your best choice in heavy duty air cylinders. Piston od Medium carbon steel, induction case-hardened, hard chrome-plated and polished to 0 MS finish. Piston rods are made from 0,000 to 00,000 psi minimum yield material in " through " diameters. The piston thread equals the catalog style # rod end thread for each rod diameter to assure proper piston-to-rod thread strength. Two wrench flats are provided for rod end attachment. od Seal The piston rod seal offers maximum sealing performance and efficiency with minimum friction. The highly resilient lips are pressure actuated and wear compensating, giving complete reliability through millions of cycles. Steel Head Bored and grooved to provide concentricity for mating parts. Ports NPTF ports are standard. nd Seals Pressure-actuated cylinder body-tohead and cap O rings. Secondary Seal Double-Service Wiperseal acts as a secondary pressure seal on the extend stroke and cleans the rod on the return stroke. Bolt-On od artridge assures true concentricity and allows removal without tie rod disassembly. Piston od Stud Furnished on " diameter rods and smaller when standard style # rod end threads are required. Piston rod studs are also available in times the catalog dimension length. Studs have rolled threads and are made from high strength steel. naerobic adhesive is used to permanently lock the stud to the piston rod. Long Bearing Surface is inboard of the seals, assuring positive lubrication from within the cylinder. n O ring is used as a seal between cartridge and head. lloy Steel Tie od Nuts lign--roove /" wide surface machined at each end of the cylinder body. This makes precise mounting quick and easy. djustable floating cushions ushions are optional, and can be supplied at head end, cap end, or both ends without change in envelope or mounting dimensions. ushions are adjustable. The P- Series cylinder design incorporates the longest cushion sleeve and cushion spear that can be provided in the standard envelope without decreasing the rod bearing and piston bearing lengths. () When a cushion is specified at the head end: a. self-centering sleeve is furnished on the piston rod assembly. b. needle valve is provided that is flush with the side of the head when wide open. It may be identified by the fact that it is socket-keyed. Needle valves are located on side number, in all mounting styles except MT, MT and MT. These styles have needle valves located on side number. c. springless check valve is provided that is also flush with the side of the head and is mounted adjacent to the needle valve except on certain bores of mounting style MS where it is mounted opposite the needle valve. The needle valve may be identified by the fact that it is slotted. d. The check and needle valves are interchangeable in the head. () When a cushion is specified at the cap end: a. cushion spear is provided on the piston rod assembly. b. float check self-centering bushing is provided which incorporates a large flow check valve for fast out-stroke action. c. socket-keyed needle valve is provided that is flush with the side of the cap when wide open. It is located on side number in all mounting styles except MT, MT and MT. These styles have needle valves located on side number.

11 P- djustable Floating ushions ushions are optional and can be supplied at head end, cap end, or both ends without change in envelope or mounting dimensions. Steel ap Bored and grooved to provide concentricity for mating parts. Ports NPTF ports are standard. Prelubricated Wearing Surfaces P- Series ir ylinders are factory prelubricated. Lube--yl applied to seals, piston, cylinder bore, piston rod and gland surfaces provides lubrication for normal operation. Lube--yl has been field and laboratory tested, and is recommended by for air cylinders where lubricant should remain in the cylinder and not be expelled into the atmosphere. Piston Lipseal Fully dynamic and selfcompensating for variations in pressure, mechanical deflections and wear. Note: Threaded rod glands are supplied on cylinders with rod diameters over /". The ylinder Body Hard chrome-plated bore, steel tubing finished to a micro inch finish. Wear bands are furnished standard on cylinder bores " and larger to ensure long service life. N High Strength Tie ods Made from 00,000 psi minimum yield steel with rolled threads for added strength. One-Piece Nodular Iron Piston The wide piston surface contacting cylinder bore reduces bearing loads. naerobic adhesive is used to permanently lock and seal the piston to the rod. Piston with Wear Band Standard "-" Bore Nut etained Piston Optional at extra charge od Lock ushion Length ylinder Bore (Inches) / / od Diameter* (Inches) / / ushion Length (Inches) Head* ap / / / / / / / / / ylinder Bore (Inches) 0 od Diameter* (Inches) / / / / / ushion Length (Inches) Head* / / / / / / / / / / ap *Head end cushions for rod diameters not listed have cushion lengths with the limits shown. For cushion selection and sizing, see Section of this catalog for additional information.

12 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series Side Lug Mount Style MS " - /" - " - /" - " and " Bore With Maximum Oversize ods Tie od etained artridge Before determining dimensions: See chart on page for cylinder rod combinations that have removable cartridges. Side Lug Mount Style MS /" - " Bore emovable artridge od nd Dimensions see table Thread Style Small Male high strength rod end stud is supplied on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, Thread Style Short Female Thread Style Intermediate Male style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied. Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch.

13 atalog SB00- Mounting Information " to " Bore Sizes Heavy-Duty Pneumatic ylinders P- Series Table nvelope and Mounting Dimensions dd Stroke Bore NPTF F J SB ST SU SW TS US LB L P SS * / / n / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / * ushions not available on " bore. On /", " and /" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available. n " bore head is " x /". See page, Section. Upper surface spot-faced for socket head screws. Table od Dimensions and nvelope Dimensions ffected by od Size Thread od xtensions and nvelope Dimensions ffected By od Size od Style Style dd Dia. & -.00 Stroke Bore B D N V V VB W XS ZB * / / / / / / / / /-0 /-0 /-0 - / /-0 / / / / / /- /-0 /-0 - / / / /- - /- - - / /- - - /- / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / P- N od Lock

14 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series Side Tap Mount Style MS " - /" - " - /" - " and " Bore With Maximum Oversize ods Tie od etained artridge Before determining dimensions: See chart on page for cylinder rod combinations that have removable cartridges. Side Tap Mount Style MS /" - " Bore emovable artridge od nd Dimensions see table Thread Style Small Male high strength rod end stud is supplied on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, Thread Style Short Female Thread Style Intermediate Male style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied. Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch. 0

15 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series Table nvelope and Mounting Dimensions dd Stroke Bore NPTF F J NT TN LB L P SN * / / n / / / / / / / / / / / / / / / / / /- - /- / / / / / / * ushions not available on " bore. On /", " and /" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available. n " bore head is " x /". See page, Section. Table od Dimensions and nvelope Dimensions ffected by od Size Thread od xtensions and nvelope Dimensions ffected By od Size od Style Style dd Dia. & -.00 Stroke Bore B D N V V VB W XT ND ZB * / / / / / / / / /-0 /-0 /-0 - / /-0 / / / / / /- /-0 /-0 - / / / /- - /- - - / /- - - /- / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / P- N od Lock

16 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series Head ectangular Flange Mount Style MF " - " Bore emovable artridge UF W V ZB + STO P + STO LB + STO D OSS FLTS B N SMLL ML TF FB HOLS F J " Bore ylinder Only " Bore ylinder Only Head nd / / od nd Dimensions see table Thread Style Small Male high strength rod end stud is supplied on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, Thread Style Short Female Thread Style Intermediate Male style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied. Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch.

17 P- atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series Table nvelope and Mounting Dimensions dd Stroke Bore NPTF F FB J TF UF LB P * / / n / / / / / / / / / / / / / / / / / / / / / / / / / / * ushions not available on " bore. On /", " and /" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available. n " bore head is " x /". See page, Section. Table od Dimensions and nvelope Dimensions ffected by od Size Thread od xtensions and nvelope Dimensions ffected By od Size od Style Style dd Stroke Dia. & -.00 Bore B D N V W ZB * / / / / / / / / /-0 /-0 /-0 - / /-0 / / / / / /- /-0 /-0 - / / / /- - /- - - / /- - - /- / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / N od Lock

18 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series ap ectangular Flange Mount Style MF " - /" - " - /" - " and " Bore With Maximum Oversize ods W V ZF + STO P + STO LB + STO Tie od etained artridge UF B N F XF + STO J F SQ. TF FB HOLS ap ectangular Flange Mount Style MF /" - " Bore W V ZF + STO P + STO LB + STO Before determining dimensions: See chart on page for cylinder rod combinations that have removable cartridges. emovable artridge UF B N F XF + STO J F SQ. TF FB HOLS od nd Dimensions see table Thread Style Small Male high strength rod end stud is supplied on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, Thread Style Short Female Thread Style Intermediate Male style rod ends are recommended through piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied. Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch.

19 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series Table nvelope and Mounting Dimensions dd Stroke Bore NPTF F FB J TF UF LB L P * / / n / / / / / / / / / / / / / / / / / / / / / / / / / / / * ushion not available on " bore. On /", " and /" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available. n " bore head is " x /". See page, Section. Table od Dimensions and nvelope Dimensions ffected by od Size od Style Style dd Stroke Dia. & -.00 Bore B D N V V VB W XF ZF / / / / / / / / /-0 /-0 /-0 - / /-0 / / / / / Thread /- /-0 /-0 - / / / /- - /- - - / /- - - /- / / / / od xtensions and nvelope Dimensions ffected By od Size / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / P- N od Lock

20 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series Head Square Flange Mount Style MF " - " Bore emovable artridge UF W V ZB + STO P + STO LB + STO D OSS FLTS UF TF B N ap Square Flange Mount Style MF " - /" - " - /" - " and " Bore With Maximum Oversize ods FB HOLS W V TF ZF + STO P + STO LB + STO F Before determining dimensions: See chart on page for cylinder rod combinations that have removable cartridges. Tie od etained artridge UF J B TF UF N F J F FB HOLS TF ap Square Flange Mount Style MF /" - " Bore V ZF + STO P + STO L + STO emovable artridge UF B TF UF N J F FB HOLS TF od nd Dimensions see table Thread Style Small Male high strength rod end stud is supplied on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, Thread Style Short Female Thread Style Intermediate Male style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied. Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch.

21 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series Table nvelope and Mounting Dimensions dd Stroke Bore NPTF F FB J TF UF LB L P * n / /.0 / / / /. / / /. / / /. / /. / / / / /. / / / / /.0 / / / / /. * ushion not available on " bore. On /", " and /" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available. n " bore head is " x /". See page, Section. Table od nd Dimensions and nvelope Dimensions ffected By od Size Thread od xtensions and nvelope Dimensions ffected By od Size od Style Style dd Stroke Dia. & -.00 Bore B D N V V VB W ZB ZF / / /-0 /-0 /- /-0.. / / / ** / / / / /-0 - / / / / / / / / / / /-0 / / / / / / / / / ** /** ** / / / / / / / / / / / / /- -. / / / / / - -. / / /** / / / / / / / ** / / / / - /-. / / /** / / - -. / ** / / / / / / / / / / / / /- - /- - - / /- - - /- / / / / / / / / / / / / / / / / / / / / / / / / / / / / /** ** ** ** /** /** ** ** /** /** ** ** ** /** / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / ** For all MF mounts and MF mounts with maximum oversized rods. P- N od Lock

22 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series Tie ods xtended Mount Style MX " - /" - " - /" - " and " Bore With Maximum Oversize ods Tie od etained artridge W V ZB + STO P + STO L + STO B DD N BB F J BB Tie ods can be extended: Both nds Model MX; ap nd Model MX; Head nd Model MX. Before determining dimensions: See chart on page for cylinder rod combinations that have removable cartridges. Tie ods xtended Mount Style MX /" - " Bore emovable artridge V ZB + STO P + STO L + STO BF B DD N BB J BB od nd Dimensions see table Thread Style Small Male high strength rod end stud is supplied on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, Thread Style Short Female Thread Style Intermediate Male style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied. Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch.

23 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series Table nvelope and Mounting Dimensions dd Stroke Bore BB DD NPTF F J L P * / / / / 0- - /- /- - - /-0 /-0 n / / / / / / / / / / / / / / / / / / / * ushion not available on " bore. On /", " and /" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available. n " bore head is " x /". See page, Section. P- Table od nd Dimensions and nvelope Dimensions ffected By od Size od Style Style dd Dia. & -.00 Stroke Bore B BF D N V V VB W ZB / / / / / / / / /-0 /-0 /-0 - / /-0 / / / / / Thread /- /-0 /-0 - / / / /- - /- - - / /- - - /- / / / / od xtensions and nvelope Dimensions ffected By od Size / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / N od Lock

24 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series Head Trunnion Mount Style MT " - /" - " - /" - " and " Bore With Maximum Oversize ods Tie od etained artridge UT W V ZB + STO P + STO L + STO D OSS FLTS TD B N TL TL F X J Head Trunnion Mount Style MT /" - " Bore emovable artridge UT Before determining dimensions: See chart on page for cylinder rod combinations that have removable cartridges. V ZB + STO P + STO L + STO D OSS FLTS TD B N SMLL ML TL TL X J od nd Dimensions see table Thread Style Small Male high strength rod end stud is supplied on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, Thread Style Short Female Thread Style Intermediate Male style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied. Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch. 0

25 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series Table nvelope and Mounting Dimensions dd Stroke Bore NPTF F J TD TL UT L P * / / n / / / / / / / / / / / / / / / / / / / / / / * ushion not available on " bore. On /", " and /" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available. n " bore head is " x /". See page, Section. P- Table od nd Dimensions and nvelope Dimensions ffected By od Size Thread od xtensions and nvelope Dimensions ffected By od Size od Style Style dd Dia. & -.00 Stroke Bore B D N V V VB W X ZB / / / / / / / / /-0 /-0 /-0 - / /-0 / / / / / /- /-0 /-0 - / / / /- - /- - - / /- - - /- / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / N od Lock

26 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series ap Trunnion Mount Style MT " - /" - " - /" - " and " Bore With Maximum Oversize ods Tie od etained artridge UT W V ZB + STO P + STO L + STO D OSS FLTS TD B N TL TL F XJ + STO J ap Trunnion Mount Style MT /" - " Bore emovable artridge Before determining dimensions: See chart on page for cylinder rod combinations that have removable cartridges. UT V ZB + STO P + STO L + STO D OSS FLTS TD B N TL TL XJ + STO J od nd Dimensions see table Thread Style Small Male high strength rod end stud is supplied on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, Thread Style Short Female Thread Style Intermediate Male style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied. Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch.

27 P- atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series Table nvelope and Mounting Dimensions dd Stroke Bore NPTF F J TD TL UT L P * n / /.0 / / /.000 / / /.000 / / / /.000 /.000 / /.000 / / / /.000 / / / / /. * ushion not available on " bore. On /", " and /" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available. n " bore head is " x /". See page, Section. Table od nd Dimensions and nvelope Dimensions ffected By od Size od Style Style dd Stroke Dia. & -.00 Bore B D N V V VB W XJ ZB / / / / / / / / /-0 /-0 /-0 - / /-0 / / / / / Thread /- /-0 /-0 - / / / /- - /- - - / /- - - /- / / / / od xtensions and nvelope Dimensions ffected By od Size / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / N od Lock

28 atalog SB00- Mounting Information /" to " Bore Heavy-Duty Pneumatic ylinders P- Series Intermediate Fixed Trunnion Mount Style MT /" - " - /" - " and " Bore With Maximum Oversize ods Tie od etained artridge UM W V ZB + STO P + STO L + STO BD D OSS FLTS UV TD B N TL TM TL F XI J Dimension XI to be specified by customer. Intermediate Fixed Trunnion Mount Style MT /" - " Bore emovable artridge UM Before determining dimensions: See chart on page for cylinder rod combinations that have removable cartridges. D OSS FLTS V ZB + STO P + STO L + STO BD UV TD B N TL TM TL XI J Dimension XI to be specified by customer. od nd Dimensions see table Thread Style Small Male high strength rod end stud is supplied on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, Thread Style Short Female Thread Style Intermediate Male style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied. Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch.

29 atalog SB00- Mounting Information /" to " Bore Heavy-Duty Pneumatic ylinders P- Series Table nvelope and Mounting Dimensions Minimum dd Stroke Bore BD NPTF F J TD TL TM UM UV Stroke L P / / / / / / / / / / / / / / / / / / / / / / / / / / 0 / / / / On /", " and /" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available. Table od nd Dimensions and nvelope Dimensions ffected By od Size Thread od nd Dimensions and nvelope Dimensions ffected By od Size od Style Style dd Dia. & -.00 Min. Stroke Bore B D N V V VB W XI ZB / / / / / / / /-0 - / /-0 / / / / / /-0 - / / / /- - /- - - / /- - - /- Dimension XI to be specified by customer. / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / P- N od Lock

30 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series ap Fixed levis Mount Style MP " - /" - " - /" - " and " Bore With Maximum Oversize ods W V Z + STO P + STO L + STO D Tie od etained artridge PIVOT PIN HD HOM PLTD D OSS FLTS B N L M F X + STO J L M W B W The ", ", " and " bore sizes have the tie rod nuts at both ends as shown. Tie rods thread into cap on all other bore sizes. ap Fixed levis Mount Style MP /" - " Bore Before determining dimensions: See chart on page for cylinder rod combinations that have removable cartridges. emovable artridge V Z + STO P + STO L + STO D PIVOT PIN HD HOM PLTD D OSS FLTS B N L M X + STO J L M W B W The ", ", " and " bore sizes have the tie rod nuts at both ends as shown. Tie rods thread into cap on all other bore sizes. od nd Dimensions see table Thread Style Small Male high strength rod end stud is supplied on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, Thread Style Short Female Thread Style Intermediate Male style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied. Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch.

31 P- atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series Table nvelope and Mounting Dimensions dd Stroke Bore B D W NPTF F J L L M M L P * / / ** /.** ** / / / n / / / / / / / / / / / / / / / / / /** / /** /** / / / /** / / / / /** / On /", " and /" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available. n " bore head is " x /". See page, Section. * ushions not available on " bore. ** In " bore size model only, a single eye mounting, /" thick, is used. Dimension D (.") is hole diameter pin not supplied. Dimension D is pin diameter except in " bore. Table od nd Dimensions and nvelope Dimensions ffected By od Size Thread od nd Dimensions and nvelope Dimensions ffected By od Size od Style Style dd Stroke Dia. & -.00 Bore B D N V V VB W X Z / / / / / / / / /-0 /-0 /-0 - / /-0 / / / / / /-0 /-0 /-0 - / / / /- - /- - - / /- - - /- / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / N od Lock

32 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series Side Lug Mount Style MS " - " Bore US W ZB + STO P + STO LB + STO ST SW SW TT SQ. TS SB SW HOLS SW F SW XS SU SS + STO SU J SW Side Tap Mount Style MS " - " Bore TT SQ. W ZB + STO P + STO LB + STO TN NT THD, ND DP TPPD MT. HOLS F XT SN + STO J od nd Dimensions see table Thread Style Small Male high strength rod end stud is supplied on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, Thread Style Short Female Thread Style Intermediate Male style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied. Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch.

33 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series Table nvelope and Mounting Dimensions dd Stroke Bore NPTF F J ND NT SB* ST SU SW TN TS US LB P SN SS 0 / / 0 / / / / / / / / / / / / / / / / / / / / / / / 0 / / *Upper surface spotfaced for socket head cap screw. Table od nd Dimensions and nvelope Dimensions ffected By od Size Thread od nd Dimensions and nvelope Dimensions ffected By od Size dd Stroke od Style Style Dia. & -.00 Bore B D N TT V W XS XT ZB 0 / / / / / / / / / / / / / / / / - / / / / /- - - /- - - /- - /- - - /- - - /- - /- - - /- - - / /- - - /- - / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / P- N od Lock

34 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series Head Square Mount Style M " - " Bore W ZB + STO P + STO LB + STO T TT SQ. T B HOLS F J ap Square Mount Style M " - " Bore W F ZJ + STO P + STO LB + STO T X + STO J T B HOLS od nd Dimensions see table Thread Style Small Male high strength rod end stud is supplied on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, Thread Style Short Female Thread Style Intermediate Male style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied. Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch. 0

35 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series Table nvelope and Mounting Dimensions dd Stroke Bore B NPTF F J T LB P 0 / / 0 / / / / / / / / / / / / Table od nd Dimensions and nvelope Dimensions ffected By od Size od Style Style dd Stroke Dia. & -.00 Bore B D N TT V W X ZB ZJ 0 / / / / / / / / / / / / / / / / - / / / Thread - - / /- - - /- - - /- - /- - - /- - - /- - /- - - /- - - / /- - - /- - / / / / / / / / / / / / / / / / od nd Dimensions and nvelope Dimensions ffected By od Size / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / P- N od Lock

36 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series Head Trunnion Mount Style MT " - " Bore UT W ZB + STO P + STO LB + STO TD TL TT SQ. TL F X J ap Trunnion Mount Style MT " - " Bore UT W ZB + STO P + STO LB + STO TD TL TT SQ. TL F XJ + STO J Intermediate Fixed Trunnion Mount Model MT " - " Bore UM W ZB + STO P + STO LB + STO BD UV TD TL TT SQ. TM TL F Dimension XI to be specified by customer. J od nd Dimensions see table Thread Style Small Male high strength rod end stud is supplied on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, Thread Style Short Female Thread Style Intermediate Male style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied. Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch.

37 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series Table nvelope and Mounting Dimensions dd Stroke -.00 Bore BD NPTF F J TD TL TM UT UM UV LB P 0 / / / / 0 / / / / / / / / / 0 / / Table od nd Dimensions and nvelope Dimensions ffected By od Size Thread od nd Dimensions and nvelope Dimensions ffected By od Size od Style Style dd Stroke Dia. & -.00 XI* Bore B D N TT V W X (Min.) XJ ZB 0 / / / / / / / / / / / / / / / / - / / / / /- - - /- - - /- - /- - - /- - - /- - /- - - /- - - / /- - - /- - * Dimension XI to be specified by customer. / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / P- N od Lock

38 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series ap Fixed levis Mount Style MP " - " Bore W Z + STO P + STO LB + STO D PIVOT PIN M L F X + STO J L M W B W Tie od xtended Mount Style MX " - " Bore Model MX Head Tie ods xtended, Illustrated. Model MX ap Tie ods xtended; and Model MX, Both nds Tie ods xtended are also available. ll Tie od Models can be dimensioned from Model MX drawing at right. W ZB + STO P + STO LB + STO DD TT SQ. F BB J Models MX and MX not offered in " bore, rod diameters /", " and /". od nd Dimensions see table Thread Style Small Male high strength rod end stud is supplied on thread style through " diameter rods. Larger sizes or special rod ends are cut threads. Style rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered, Thread Style Short Female Thread Style Intermediate Male style rod ends are recommended through " piston rod diameters and style rod ends are recommended on larger diameters. Use style for applications where female rod end threads are required. If rod end is not specified, style will be supplied. Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch.

39 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series Table nvelope and Mounting Dimensions dd Stroke Bore BB B D* W DD NPTF F J L L M M LB P / / / / / / / / / / / 0 / / / / / / / / / / / / * D is pin diameter. Table od nd Dimensions and nvelope Dimensions ffected By od Size Thread od nd Dimensions and nvelope Dimensions ffected By od Size od Style Style dd Stroke Dia. & -.00 Bore B D N TT V W X ZB Z 0 / / / / / / / / / / / / / / / / - / / / / /- - - /- - - /- - /- - - /- - - /- - /- - - /- - - / /- - - /- - / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 0 0 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / P- N od Lock

40 atalog SB00- Mounting Information /" to " Bore Heavy-Duty Pneumatic ylinders P- Series Spherical Bearing Mount Style MPU /" - " Bore Z + STO X + STO M LUBITION FITTIN MS D N X Thread dd Stroke od Style Style Dia. Bore D X M MS N X Z / / / / / / / /-0 /-0 / /-0 /-0 /-0 /-0 /-0 / Maximum operating pressure at : design factor is based on tensile strength of material. Pressure ratings are based on standard commercial bearing ratings. Dimension D is hole diameter. Threads listed are also for a spherical rod eye which match style or style. The spherical rod eye pin diameter matches the cap pin and (if required) needs to be purchased separately; see P- mounting accessories for detailed information. / / / / / / / / / / / / / / / / / / Max. Oper. psi P

41 atalog SB00- Mounting Information " to " Bore Heavy-Duty Pneumatic ylinders P- Series Spherical Bearing Mount Style MPU " - " Bore Z + STO X + STO M LUBITION FITTIN MS D W N X Thread dd Stroke Max. od Style Style Oper. Dia. psi Bore D X M MS N W X Z P- / / / / 0 / / / / 0 0 / / / / / / / / / 0 0 / / / 0 / / -.0 / 0 0 / / / / /- /- / / / / / / / / / /- / /.00 / 0 / / / - /- /- /- - / / / / / / - / / /.0000 / / - / 0 / - - / / Maximum operating pressure at : design factor is based on tensile strength of material. Pressure ratings are based on standard commercial bearing ratings. Dimension D is hole diameter. Threads listed are also for a spherical rod eye which match style or style. The spherical rod eye pin diameter matches the cap pin and (if required) needs to be purchased separately; see P- mounting accessories for detailed information. P- N od Lock

42 atalog SB00- ylinder ccessories ylinder ccessories Spherical Bearing Mount Style MPU offers a complete range of ylinder ccessories to assure you of the greatest versatility in present or future cylinder applications. ccessories offered for the respective cylinder include the od ye, Heavy-Duty Pneumatic ylinders P- Series Pivot Pin and levis Bracket. To select the proper part number for any desired accessory refer to the charts below. Spherical od ye Dimensions D L (Max) Lube Fitting X P- Series Bore.0,.00,.0.,.00,.00 Part Number D X L J Thread JL Load apacity (lb) / , / J Thd JL Order to fit Piston od Thread Size. Pivot Pin Dimensions L D Pivot Pins are furnished with () etainer ings. P- Series Bore.0,.00,.0.,.00,.00 Part Number D L Shear apacity (lb) , levis Bracket Dimensions FL M L M DD (X) W F W D ±.00 FL M L DD (X) W F W D ±.00 F F Fabricated Steel Order to fit ylinder ap or od ye. ast Ductile Iron P- Series Bore.0,.00,.0.,.00,.00 Pin ast Ductile Iron Part Number Fabricated Steel Part Number D F W DD F FL L M M Load apacity (lb) ,

43 atalog SB00- Double od Models " to " Bore Heavy-Duty Pneumatic ylinders P- Series Double od Models " to " Bore To determine dimensions for a double rod cylinder, first refer to the desired single rod mounting style cylinder shown on preceding pages of this catalog. fter selecting necessary dimensions from that drawing, return to this page and supplement the single rod dimensions with those shown on the drawing and dimension table below. Note that double rod cylinders have a head (Dim. ) at both ends and that dimension LD or LF replaces LB or L. The double rod dimensions differ from, or are in addition to those for single rod cylinders shown on preceding pages and provide the information needed to completely dimension a double rod cylinder. On a double rod cylinder where the two rod ends are different, be sure to clearly state which rod end is to be assembled at which end. Port position is standard. If other than standard, specify position,, or when viewed from one end only. If only one end of these Double od ylinders is to be cushioned, be sure to specify clearly which end this will be. Specify XI dimension from rod end #. How to Use Double od ylinder Dimension Drawings " to " Bores Tie od etained artridge " to " Bores emovable artridge " to " Bores BF N W F V B ZM + X STO P + STO LD + STO F W + STO od nd # od nd # N V B ZM + X STO P + STO LF + STO + STO od nd # od nd # W ZM + X STO P + STO LD + STO P- N od Lock od nd # od nd # F F MDS MDT* MDX MDX ll dimensions are in inches and apply to standard rod sizes only. For alternate rod sizes, determine all envelope dimensions (within LD dim.) as described above and then use appropriate rod end dimensions for proper rod size from single rod cylinder. od Dia. dd Stroke dd X Stroke Bore LD LF SS ZM / / / 0 / eplaces: On single rod mounting styles: 0 LB / L ll Mtg. Styles / SS MS / / 0 ll Mtgs. MDF MDF *Mounting style MDT not available in " and " bore sizes.

44 atalog SB00- ylinder ccessories ylinder ccessories offers a complete range of cylinder accessories to assure flexibility and versatility in present or future cylinder applications. od nd ccessories ccessories offered for the rod end of the cylinder include: od levis, ye Bracket, nuckle, levis Bracket and Pivot Pin. To select the proper part number for any desired accessory, refer to hart below and look opposite the thread size of the rod end as indicated in the first column. The Pivot Pins, ye Brackets and levis Brackets are listed opposite the thread size which their mating nuckles or levises fit. Heavy-Duty Pneumatic ylinders P- Series ccessory Load apacity The various accessories on this and the following pages have been load rated for your convenience. The load capacity shown in pounds is the recommended maximum load for that accessory based on a : design factor in tension. (Pivot Pin is rated in shear.) Before specifying, compare the actual load or the tension (pull) force at maximum operating pressure of the cylinder with the load capacity of the accessory you plan to use. If load or pull force of cylinder exceeds load capacity of accessory, consult factory. hart Thread Size Pin Part Number od levis Mounting Plate or ye Bracket Pivot Pin Load Forged Steel or ast Ductile Iron Part apacity Part Load apacity (lb) Number (lb) Number Shear apacity (lb) / / / / / / Includes pivot pin. ylinder accessory dimensions conform to NSI/NFP/T Mounting Plates Mounting Plates for Style MP (clevis mounted) cylinders are offered. To select proper part number for your application, refer to hart B at right. hart B Mounting Plate Part Number P- Series Bore ,.00, ,.00, ,

45 atalog SB00- ylinder ccessories Heavy-Duty Pneumatic ylinders P- Series od levis Dimensions W B W Pivot Pin Dimensions D ±.00 THD Part Number Pin B D W Thread / / / / / / L D Part Number D L This size supplied with cotter pins. Notes: Pivot Pins are furnished with levis Mounted ylinders as standard. Pivot Pins are furnished with () etainer ings. Pivot Pins must be ordered as a separate item if to be used with nuckles, od levises, or levis Brackets. od levises with pin diameters 0. thru. are forged steel. od levises with.0 pin diameter and larger are cast ductile iron. Includes Pivot Pin onsult appropriate cylinder rod end dimensions for compatibility. P- N od Lock Forged Steel or ast Ductile Iron Mounting Plate or ye Bracket Dimensions Note: ast ductile iron eye brackets must not be welded in place. FL M F pprox. 0 L DD (X) B D ±.00 ast or Forged Pin B D DD F FL L M Part Number (s ast) (s ast) When used to mate with the od levis, select by pin diameter in the table above. ye Brackets with pin diameters 0.00 thru. are forged steel. ye Brackets with 0. and.0 pin diameter and larger are cast ductile iron. These dimensions vary from NFP standard. F is increased by 0.. Sufficient L clearance remains for full swing arc with cap clevis cylinders and rod clevises. Mounting base thickness dimension F is increased on these sizes to provide greater load capacity than the former fabricated steel design. ast ductile iron dimensions F and FL are 0. larger for.00 pin diameter and.0 larger for.000 pin diameter.

46 atalog SB00- ylinder ccessories od nd ccessories ccessories offered for the rod end of the cylinder include od levis, ye Bracket, nuckle, levis Bracket, and Pivot Pin. To select the proper part number for any desired accessory, refer to the table below and look in the row to the right of the rod thread in the first column. For economical accessory selection, it is recommended that rod end style be specified on your cylinder order. Heavy-Duty Pneumatic ylinders P- Series ccessory Load apacity The various accessories have been load rated for your convenience. The load capacity in pounds is the recommended maximum load for that accessory based on a : design factor in tension. (Pivot Pin is rated in shear.) Before specifying, compare the actual load or the tension (pull) force at the maximum operating pressure of the cylinder with the load capacity of the accessory you plan to use. If load or pull force of cylinder exceeds load capacity of accessory, consult factory. Thread Pin nuckle levis Bracket Pivot Pin Size Part Load Forged Steel or Fabricated Steel Part Shear Number apacity ast Ductile Iron Number apacity (lb) Part Load apacity Part Load apacity (lb) Number (lb) Number (lb) / / / / / N/ N/ / N/.000 N/ N/ N/ N/ N/ N/ This size supplied with cotter pins. Forged Steel or ast Ductile Iron levis Bracket Dimensions pprox. 0 W B W FL M F L DD (X) D ±.00 Note: ast ductile iron clevis brackets must not be welded in place. ast or Forged Pin B D W DD F FL L M Part Number (s ast) (s ast) levis Brackets with pin diameters 0.00 thru. are forged steel. levis Brackets with 0. and.0 pin diameter and larger are cast ductile iron.

47 atalog SB00- ylinder ccessories Heavy-Duty Pneumatic ylinders P- Series nuckle Dimensions D X D Max. D±.00 B Thread Size thru - Thread Fabricated Steel levis Bracket Dimensions D Max. D ±.00 L Min. X D JL Thread Size - & Larger Part Number Pin B D JL L min Thread / / / / / / B Thread Pivot Pin Dimensions L D Part Number D L This size supplied with cotter pins. Notes: Pivot Pins are furnished with levis Mounted ylinders as standard. Pivot Pins are furnished with () etainer ings. Pivot Pins must be ordered as a separate item if to be used with nuckles, od levises, or levis Brackets. P- N od Lock FL M L M DD (X) W B W D ±.00 F Fabricated Steel Part Number Pin B D W DD F FL L M M levis Bracket for 0. diameter pin is only available in cast ductile iron construction. See part number 0000 on previous page.

48 atalog SB00- Piston od nd Style Heavy-Duty Pneumatic ylinders P- Series Style Piston od nd od end flange coupling for P- and PN Series Pneumatic ylinders n Simplifies alignment n educes assembly time n llows full rated pneumatic pressure in push and pull directions n vailable in " through -/" piston rod diameters Style od nd / M F D W F or T DPNDIN ON MOUNTIN Dimensions Style od nd od Dia. D F M W. / /. /. / /.0 /. / /. / /. / / /. /. / / / /. / / /. / /. / See mounting information pages for F, and T per bore and series. onsult Factory for availability of mounting accessories and Hardware. How To Order omplete Model Number and place a in the Piston od nd designator position. xample: PDx.00

49 P- atalog SB00- Piston od nd Style Heavy-Duty Pneumatic ylinders P- Series Style Piston od nd Split ouplers and Weld Plates D F BOLTS B STL OD ND SPLIT OUPL WLD PLT N od Lock! WNIN: Piston rod separation from the machine member can result in severe personal injury or even death to nearby personnel. The cylinder user must make sure the weld holding the weld plate to the machine is of sufficient quality and size to hold the intended load. The cylinder user must also make sure the bolts holding split coupler to the weld plate are of sufficient strength to hold the intended load and installed in such a way that they will not become loose during the machine s operation. Table Part Numbers and Dimensions SPLIT WLD OD BOLT OUPL PLT DI. B D F BOLT SIZ IL PT NO. PT NO #0- x. L x. L x.0 L x. L x. L / x.0 L x. L / x.0 L x.0 L / x.00 L x.00 L / x.00 L Note: Bolts are not included with split coupler or weld plate.

50 atalog SB00- How to Order Heavy-Duty Pneumatic ylinders P- Series How to Order P- Series ylinders When ordering P- Series cylinders, please review the following: Note: Duplicate cylinders can be ordered by giving the SIL NUMB from the nameplate of the original cylinder. Factory records supply a quick positive identification. Piston ods: Specify model number code based on bore size and rod diameter. ive thread style number for a standard thread or specify dimensions. See Style 0 od nd below. ushions: If cushions are required specify according to the model number on the next page. If the cylinder is to have a double rod and only one cushion is required, be sure to specify clearly which end of the cylinder is to be cushioned. Special Modifications: dditional information is required on orders for cylinders with special modifications. This is best handled with descriptive notes. For further information, consult factory. Fluid Medium: P- Series pneumatic cylinders are equipped with seals for use with lubricated air. lass Seals lass seals are the seals provided as standard in a cylinder assembly unless otherwise specified. For further information on fluid compatibility or operating limitations of all components, see section. For the P- Series cylinders the following make-up lass Seals: Primary Piston od Seal Nitrile with PTF back-up washers Piston od Wiper Nitrile Piston Seals Nitrile with polymyte back-up washers O-ings Nitrile Style 0 od nd style 0 rod end indicates a special rod end configuration. ll special piston rod dimensions must have all three: ; ; and W/ specified with the rod fully retracted. sketch or drawing should be submitted for rod ends requiring special machining such as snap ring grooves, keyways, tapers, multiple diameters, etc. It is good design practice to have this machining done on a diameter at least 0.0 inches smaller than the piston rod diameter. This allows the piston rod to have a chamfer preventing rod seal damage during assembly or maintenance. Standard style rod ends with a longer than standard W dimension should call out a style 0 rod end and the note: same as except W=. drawing should be submitted for special rod ends that have specific tolerances or special radii. Special rod ends that have smaller than standard male threads, larger than standard female threads, or style rod ends with smaller than standard F or dimensions are to be reviewed by ngineering for proper strength at operating pressure. Service Policy On cylinders returned to the factory for repairs, it is standard policy for the to make such part replacements as will put the cylinder in as good as new condition. Should the condition of the returned cylinder be such that expenses for repair would exceed the costs of a new one, you will be notified. ddress all correspondence and make shipments to, Service Department at your nearest regional plant listed in the pages of this catalog. ertified Dimensions guarantees that all cylinders ordered from this catalog will be built to dimensions shown. ll dimensions are certified to be correct, and thus it is not necessary to request certified drawings.

51 atalog SB00- How to Order Heavy-Duty Pneumatic ylinders P- Series How To Order By Model Number P- Pneumatic ylinders can be specified by model number by using the tables shown at right.. Type Select the Model Number ode which identifies single, double end or non-lube.. Bore & od Diameter Select the Model Number ode which identifies the desired bore size and rod diameter combination.. Mounting & ushioning Select the Model Number ode which identifies the desired mounting style and cushioning option.. od nd Style Select the Model Number ode which identifies the desired rod end thread style.. Seal Type omplete the Model Number by selecting the type of seals desired.. Stroke Length It is necessary to specify the stroke length desired following the Model Number. For example: P0 with " stroke. Specifying the Desired Trunnion Location For cylinders with intermediate trunnion mounting, the dimension specified should be the distance from the piston rod reference point to the center-line of the pin. The xample Would Identify: single end pneumatic cylinder, -/" bore size, " piston rod diameter, side tapped mount, cushioned both ends, with a small male rod thread, Buna N Seals, a " stroke. Optional Mounting ccessories Specify separately the part number for desired optional mounting accessories. Note: For special modifications other than piston rod ends use S in the tenth position of the model number and describe special features required. xample: P0S " Stroke ylinder to be Nickel Plated. Model Number Type P- Series Pneumatic Single nd P Double nd PB Non-Lube Single nd PN Non-Lube Double nd PP Bore od Model No. Size Dia. ode Bore od Model No. Size Dia. ode " " H " H " /" S0 " H " S0 " " J /" " 0 " J " " J " " B0 /" J " B " J " B /" J /" " 0 " J " /" J " " J " /" J " " D 0" " " D " " D /" " D " " " /" " " " /" " " /" /" " " F " L " F /" L " F " L " F /" L /" F " L " F /" L /" F " L " " /" L " " /" M " " M /" /" M " " M /" /" M " " M /" M Model Number ode Mounting Style NFP Non- ush. ush. ush. Style ush. Head ap Both Side Lug MS Side Tap MS Head ectangular Flange (-) MF ap ectangular Flange (-) MF Head Square Flange (-) MF 0 ap Square Flange (-) MF Head Square (-) M 0 ap Square (-) M Tie ods xtended Both nds MX Tie ods xtended ap nd MX 0 Tie ods xtended Head nd MX Head Trunnion MT 0 ap Trunnion MT Intermediate Fixed Trunnion MT 0 ap Fixed levis MP Spherical Bearing MPU 0 NO MOUNT MX0 od nd Style Model Number ode Small Male Short Female Intermediate Male Flange oupling Female Thread for Spherical od ye Special Specify 0 Seal Type Model Number ode Buna N Seals Fluorocarbon Seals High Temperature Seals Model Number xample: P 0 W/" Stroke Specify Stroke Length.00" P- N od Lock

52 atalog SB00- PN Series Non-Lube Heavy-Duty Pneumatic ylinders P- Series Non-Lube Heavy-Duty ir ylinders PN Series For millions of trouble free cycles n Nominal pressure 0 psi ir Service n Standard Bore Sizes " through " n Piston od Diameters /" through /" n Standard Mounting Styles n NFP Interchangeable n xceeds utomotive Specifications

53 P- atalog SB00- PN Series Non-Lube Heavy-Duty Pneumatic ylinders P- Series The PN Series Non-Lube ir ylinder with Proven Performance Millions of trouble free cycles with... ZO L. Piston Lipseals land Lipseal od Lock N Increased Market Demand and continuous research and testing efforts inspired the development of the PN Series Non-Lubricated ir ylinder. The PN Series piston rod and cylinder barrel surfaces act as highly efficient lubricant reservoirs, maintaining their own lubricant film. Other manufacturers pack grease into grooves and pockets and call them reservoirs. The fact of the matter is that as those grooves empty out over time; grease is being transported out of the cylinder and into the control system components and the atmosphere. The PN Series concept eliminates that problem by maintaining the lubricant film where it belongs: on the seals, bearing surfaces, piston rod and cylinder bore. Benefits include...long seal and bearing life and since no oil is added through the use of lubricators no oil is expelled into the atmosphere with the exhaust air as the cylinder strokes. natomy of PN Series Sealing and Lubricant etention Systems ounded sealing lip glides over lubricant film instead of scraping it off. educes friction, increases life and eliminates the need for added lubrication. Increased heel thickness and outer lip extension improve stability, resist rolling. Drawing not to scale High integrity lubricant film with suspended PTF particles

54 atalog SB00- PN Series Specifications / How to Order In the PN Series you get all the cost saving benefits and features of the popular heavy-duty P- Series air cylinder including... n Bolt-On od land ssembly for positive no leak sealing n Piston rod, hard chrome-plated and casehardened steel n High strength rolled thread Piston od Stud Heavy-Duty Pneumatic ylinders P- Series n Steel tube cylinder body with chrome-plated micro finish bore... Plus the innovative Non-Lube feature which further increases your benefits of lower operating and maintenance costs. Standard Specifications n Heavy-Duty Service NSI/(NFP) T Mounting Dimension Standards n Standard onstruction Square Head Tie od Design n Standard Temperature -0 F to + F n Standard Fluid Filtered ir n Strokes vailable in any practical stroke length n ushions Optional at either end or both ends of stroke. Float heck at cap end. In line with our policy of continuing product improvement, specifications in this bulletin are subject to change. vailable Bore and od Sizes Bore Sizes vailable " /" " /" " " " " " 0" " " od Sizes vailable /" " " " " " /" " /" " /" " /" How to Order PN Series Non-Lube ir ylinders Data equired on all PN ylinder Orders When ordering PN Series cylinders, be sure to specify each of the following requirements: (Note: Duplicate cylinders can be ordered by giving the SIL NUMB from the nameplate of the original cylinder. Factory records supply a quick, positive identification.) a) Bore Size b) Mounting Style Specify your choice of mounting style as shown in this catalog. If double rod is wanted, specify with double rod. c) Series Designation (PN) d) Length of Stroke e) Piston od Diameter Specify rod diameter in PN Series cylinders, standard rod diameters will be furnished if not otherwise specified, unless length of stroke makes the application questionable. f) Piston od nd Thread Style ive thread style number or specify dimensions. Thread style number will be supplied if not otherwise specified. g) ushions (if required) Specify ushion-head end, ushion-cap end or ushion-both ends as required. If cylinder is to have a double rod and only one cushion is required, be sure to specify clearly which end of the cylinder is to be cushioned. 0

55 od Lock N P- N Series Medium-Duty Pre-Lubricated Pneumatic ylinders ontents Specifications... Ford Order ode... Mounting Dimensions...- Spherical Bearing Mount...0- ylinder ccessories... Double od Models... lignment oupler... ccessories... ccessories / ylinder its... Mounting Styles... Order ode...

56 atalog SB00- eneral Specifications Medium-Duty Pneumatic ylinders N Series Universal * N Series Medium Duty Pre-Lubricated Pneumatic ylinders * These cylinders are specified for utomotive and Foundry pplications under the brand name UNIVSL. NL SPIFITIONS N Series Pneumatic ylinders INDUST STNDDS Meets J.I.. and NSI/(NFP) T..-00 standards. PSSU TIN 0 psi ir TMPTU N Buna-N Seal: -0 F to + F BO SIZS -/" through " PISTON OD DIMT " through -/" MOUNTINS 0 styles Ford approved PISTON ND THD One standard style; Thread rolled on -/" through " bore size through " thread with rounded root radius for maximum strength. USHIONS vailable at either end or both ends; all bore sizes HD ND P NDS Machined from steel blocks PISTON Steel with non-metallic wear ring PISTON ODS 00,000 psi minimum yield strength steel. Induction hardened to c. round, polished and hard chrome plated to a 0 micro-inch finish. TUB Steel tubing is finished to 0- micro-inch finish and I.D. hard chrome plated. TI ODS High tensile steel with rolled threads TI OD NUTS ll steel, prevailing torque type OUNDD LIP U-UP arboxylated Nitrile standard. natomy of Series N Sealing and Lubricant etention Systems ounded sealing lip glides over lubricant film instead of scraping it off. educes friction, increases life and eliminates the need for added lubrication. Increased heel thickness and outer lip extension improve stability, resist rolling. Drawing not to scale High integrity lubricant film with suspended PTF particles

57 atalog SB00- Ford Order ode Medium-Duty Pneumatic ylinders N Series Ford N Medium Duty ir ylinder Ordering ode Ordering xample N MF. X.0.0 -H P-HP S Ford Series N Mounting ode Description MX Tie ods xtended Both nds MX Tie ods xtended ap nd MX Tie ods xtended Head nd MF Head ect Flange /"-" MF ap ect Flange /"-" M Head Square "-" M ap Square "-" MS Side Lug MP ap Fixed levis MT Intermediate Fixed Trunnion ylinder Bore and Stroke Piston od Diameter and od nd Style Only one rod size is specified per bore. Ford Specification (Other rod sizes may be specified for replacement only) (see pages Piston od nd Styles & ) Style Special Long Male Style IM Intermediate Male Style SM Small Male Style SM Small Male Style S Special od nd - Specify P- N od Lock ushion Location indicates ap nd ushion H indicates Head nd ushion ushion djust positions,,, or Port Type and Location indicates ap nd Port H indicates Head nd Port P indicates NPTF pipe thread (standard) T indicates S straight thread Ports positions,, or S Special Modifications S in this position is used to describe all special features that are other than standard, or advise serial number if for replacement. NOT: dd the letter D for double rod end cylinder. XMPL: N-MDF NOT: dd the letter if key extension is required. XMPL: N-MS N cylinders are built to Ford Motor ompany Vehicle Operations Specifications. ny deviation from this standard should be approved in writing by Ford Motor ompany.

58 atalog SB00- Mounting Information /" to " Bore Medium-Duty Pneumatic ylinders N Series Side Lug Mount Style MS /" - " - /" - " and " Bore With Maximum Oversize ods Tie od etained artridge Before determining dimensions: See chart on page for cylinder rod combinations that have removable cartridges. Side Lug Mount Style MS /" - " Bore emovable artridge od nd Dimensions see table Thread Style Small Male Thread Style Short Female Thread Style Intermediate Male Thread Style utomotive Male LL LL Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch.

59 atalog SB00- Mounting Information /" to " Bore Medium-Duty Pneumatic ylinders N Series Table nvelope and Mounting Dimensions dd Stroke Bore NPTF S F J SB ST SU SW TS US LB L P SS / / / / / / / / / #** # # #0 #0 #0 # / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / On /", " and /" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available. Upper surface spot-faced for socket head screws. ** Port adapter fitting furnished at head end only. Table od Dimensions and nvelope Dimensions ffected by od Size Thread od xtensions and nvelope Dimensions ffected By od Size od Style Style dd Dia. & & -.00 Stroke Bore LL B D N V V VB W XS ZB / / / / / / / /-0 - / /-0 / / / / / /-0 - / / / /- - /- - - / /- - - /- / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / P- N od Lock

60 atalog SB00- Mounting Information /" to " Bore Medium-Duty Pneumatic ylinders N Series Side Tap Mount Style MS /" - " - /" - " and " Bore With Maximum Oversize ods Tie od etained artridge Before determining dimensions: See chart on page for cylinder rod combinations that have removable cartridges. Side Tap Mount Style MS /" - " Bore emovable artridge od nd Dimensions see table Thread Style Small Male Thread Style Short Female Thread Style Intermediate Male Thread Style utomotive Male LL LL Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch.

61 atalog SB00- Mounting Information /" to " Bore Medium-Duty Pneumatic ylinders N Series Table nvelope and Mounting Dimensions dd Stroke Bore NPTF S F J NT TN LB L P SN / / / / / / / / / #** # # #0 #0 #0 # / / / / / / / / -0 /- - /- / / / / / On /", " and /" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available. ** Port adapter fitting furnished at head end only. Table od Dimensions and nvelope Dimensions ffected by od Size Thread od Style Style Dia. & & -.00 Bore LL B D N V V VB W XT ND ZB / / / / / / / / / / / / / / / / / /-0 - / /-0 / / / / / /-0 - / / / /- - /- - - / /- - - /- / / / / / / / / / / / / / / / / / od xtensions and nvelope Dimensions ffected By od Size / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / dd Stroke / / / / / / / / / / / / / / / / / / / / / / / P- N od Lock

62 atalog SB00- Mounting Information /" to " Bore Medium-Duty Pneumatic ylinders N Series Head ectangular Flange Mount Style MF /" - " Bore UF W V ZB + STO P + STO LB + STO D OSS FLTS B N TF FB HOLS F J ap ectangular Flange Mount Style MF /" - " - /" - " and " Bore With Maximum Oversize ods W V ZF + STO P + STO LB + STO Tie od etained artridge UF B N F XF + STO J F SQ. TF FB HOLS Before determining dimensions: See chart on page for cylinder rod combinations that have removable cartridges. ap ectangular Flange Mount Style MF /" - " Bore V ZF + STO P + STO L + STO emovable artridge UF B N XF + STO J F SQ. TF FB HOLS od nd Dimensions see table Thread Style Small Male Thread Style Short Female Thread Style Intermediate Male Thread Style utomotive Male LL LL Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch.

63 atalog SB00- Mounting Information /" to " Bore Medium-Duty Pneumatic ylinders N Series Table nvelope and Mounting Dimensions dd Stroke Bore NPTF S F FB J TF UF LB L P / / / / / / / / / #** # # #0 #0 #0 # / / / / / / / / / / / / / / / / / On /", " and /" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available. ** Port adapter fitting furnished at head end only. Table od Dimensions and nvelope Dimensions ffected by od Size Thread od xtensions and nvelope Dimensions ffected By od Size od Style Style Dia. & & -.00 Bore LL B D N V V VB W XF ZB ZF / / / / / / / / / / / / / / / /-0 - / /-0 / / / / / /-0 - / / / /- - /- - - / /- - - /- / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / dd Stroke / / / / / / / / / / / / / / / / / / / / / / / / / / / P- N od Lock

64 atalog SB00- Mounting Information /" to " Bore Medium-Duty Pneumatic ylinders N Series Head Square Flange Mount Style MF /" - " Bore emovable artridge UF W V ZB + STO P + STO LB + STO D OSS FLTS UF TF B N ap Square Flange Mount Style MF /" - " - /" - " and " Bore With Maximum Oversize ods FB HOLS W V TF ZF + STO P + STO LB + STO F Before determining dimensions: See chart on page for cylinder rod combinations that have removable cartridges. Tie od etained artridge UF J B TF UF N F J F FB HOLS TF ap Square Flange Mount Style MF /" - " Bore V ZF + STO P + STO L + STO emovable artridge UF B TF UF N J F FB HOLS TF od nd Dimensions see table Thread Style Small Male Thread Style Short Female Thread Style Intermediate Male Thread Style utomotive Male LL LL Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch. 0

65 atalog SB00- Mounting Information /" to " Bore Medium-Duty Pneumatic ylinders N Series Table nvelope and Mounting Dimensions dd Stroke Bore NPTF S F FB J TF UF LB L P / / / / / / / / / #** # # #0 #0 #0 # / / / / / / / / / / / / / / / / / On /", " and /" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available. ** Port adapter fitting furnished at head end only. Table od nd Dimensions and nvelope Dimensions ffected By od Size Thread od xtensions and nvelope Dimensions ffected By od Size od Style Style dd Stroke Dia. & & -.00 Bore LL B D N V V VB W ZB ZF / / / / / / / /-0 - / /-0 / / / / / /-0 - / / / /- - /- - - / /- - - /- / / / / / ** For all MF mounts and MF mounts with maximum oversized rods. / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / ** / ** /** ** /** ** /** ** /** ** ** ** /** /** ** ** /** /** ** ** ** /** / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / P- N od Lock

66 atalog SB00- Mounting Information /" to " Bore Medium-Duty Pneumatic ylinders N Series Tie ods xtended Mount Style MX /" - " - /" - " and " Bore With Maximum Oversize ods Tie od etained artridge W V ZB + STO P + STO L + STO B DD N BB F J BB Tie ods can be extended: Both nds Model MX; ap nd Model MX; Head nd Model MX. Before determining dimensions: See chart on page for cylinder rod combinations that have removable cartridges. Tie ods xtended Mount Style MX /" - " Bore emovable artridge V ZB + STO P + STO L + STO BF B DD N BB J BB od nd Dimensions see table Thread Style Small Male Thread Style Short Female Thread Style Intermediate Male Thread Style utomotive Male LL LL Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch.

67 atalog SB00- Mounting Information /" to " Bore Medium-Duty Pneumatic ylinders N Series Table nvelope and Mounting Dimensions dd Stroke Bore BB DD NPTF S F J L P / / / / - /- /- - - /-0 /-0 / / / / / / / #** # # #0 #0 #0 # / / / / / / / / / On /", " and /" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available. ** Port adapter fitting furnished at head end only. Table od nd Dimensions and nvelope Dimensions ffected By od Size Thread od xtensions and nvelope Dimensions ffected By od Size od Dia. Style & Style & dd Stroke Bore LL B BF D N V V VB W ZB / /-0 /-0.. / / / / - -. / / / / / / /-0 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / - /- /.. / / / / - - /.. / / / / / / / / / / / / /- - /- - - / /- - - /- / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / P- N od Lock

68 atalog SB00- Mounting Information /" to " Bore Medium-Duty Pneumatic ylinders N Series Head Trunnion Mount Style MT /" - " - /" - " and " Bore With Maximum Oversize ods Tie od etained artridge UT W V ZB + STO P + STO L + STO D OSS FLTS TD B N TL TL F X J Head Trunnion Mount Style MT /" - " Bore emovable artridge UT D OSS FLTS Before determining dimensions: See chart on page for cylinder rod combinations that have removable cartridges. W V ZB + STO P + STO L + STO TD B N TL TL F XJ + STO J od nd Dimensions see table Thread Style Small Male Thread Style Short Female Thread Style Intermediate Male Thread Style utomotive Male LL LL Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch.

69 atalog SB00- Mounting Information /" to " Bore Medium-Duty Pneumatic ylinders N Series Table nvelope and Mounting Dimensions dd Stroke -.00 Bore NPTF S F J TD TL UT L P / / / / / / / / / #** # # #0 #0 #0 # / / / / / / / / / / / / On /", " and /" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available. ** Port adapter fitting furnished at head end only. Table od nd Dimensions and nvelope Dimensions ffected By od Size Thread od xtensions and nvelope Dimensions ffected By od Size od Style Style Dia. & & -.00 Bore LL B D N V V VB W X ZB / / / / / / / /-0 - / /-0 / / / / / /-0 - / / / /- - /- - - / /- - - /- / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / dd Stroke / / / / / / / / / / / / / / / / / / / / / / / P- N od Lock

70 atalog SB00- Mounting Information /" to " Bore Medium-Duty Pneumatic ylinders N Series ap Trunnion Mount Style MT /" - " /" - " and " Bore With Maximum Oversize ods Tie od etained artridge UT W V ZB + STO P + STO L + STO D OSS FLTS TD B N TL TL F XJ + STO J ap Trunnion Mount Style MT /" - " Bore Before determining dimensions: See chart on page for cylinder rod combinations that have removable cartridges. emovable artridge UT V ZB + STO P + STO L + STO D OSS FLTS TD B N TL TL XJ + STO J od nd Dimensions see table Thread Style Small Male Thread Style Short Female Thread Style Intermediate Male Thread Style utomotive Male LL LL Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch.

71 atalog SB00- Mounting Information /" to " Bore Medium-Duty Pneumatic ylinders N Series Table nvelope and Mounting Dimensions dd Stroke Bore NPTF S F J TD TL UT L P / / / / / / / / / #** # # #0 #0 #0 # / / / / / / / / / / / / On /", " and /" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available. ** Port adapter fitting furnished at head end only. Table od nd Dimensions and nvelope Dimensions ffected By od Size Thread od xtensions and nvelope Dimensions ffected By od Size od Style Style Dia. & & -.00 dd Stroke Bore LL B D N V V VB W XJ ZB / /-0 /-0. / / / / - -. / / / / / / / /-0 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / - /- /. / / / / - - /. / / / / / / / / / / / / /- - /- - - / /- - - /- / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / P- N od Lock

72 atalog SB00- Mounting Information /" to " Bore Medium-Duty Pneumatic ylinders N Series Intermediate Fixed Trunnion Mount Style MT /" - " - /" - " and " Bore With Maximum Oversize ods Tie od etained artridge UM W V ZB + STO P + STO L + STO BD D OSS FLTS UV TD B N TL TM TL F XI J u u Dimension XI to be specified by customer. Intermediate Fixed Trunnion Mount Style MT /" - " Bore emovable artridge UM Before determining dimensions: See chart on page for cylinder rod combinations that have removable cartridges. D OSS FLTS V ZB + STO P + STO L + STO BD UV TD B N TL TM TL XI J u u Dimension XI to be specified by customer. od nd Dimensions see table Thread Style Small Male Thread Style Short Female Thread Style Intermediate Male Thread Style utomotive Male LL LL Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch.

73 atalog SB00- Mounting Information /" to " Bore Medium-Duty Pneumatic ylinders N Series Table nvelope and Mounting Dimensions Minimum dd Stroke -.00 Bore BD NPTF S F J TD TL TM UM UV Stroke L P / / / / / / / / / / / / #** # # #0 #0 #0 # / / / / / / / / / / / / / / 0 / / / / On /", " and /" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available. ** Port adapter fitting furnished at head end only. Table od nd Dimensions and nvelope Dimensions ffected By od Size Thread od xtensions and nvelope Dimensions ffected By od Size od Style Style Dia. & & -.00 Min. u u Bore LL B D N V V VB W XI ZB / /-0 /-0. / / / / / - -. / / / / / / / /-0 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / - /- /. / / / / / - - /. / / / / / / / / / / / / / /- - /- - - / /- - - /- / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / u u Dimension XI to be specified by customer. dd Stroke P- N od Lock

74 atalog SB00- Mounting Information /" to " Bore Medium-Duty Pneumatic ylinders N Series ap Fixed levis Mount Style MP /" - " - /" - " and " Bore With Maximum Oversize ods W V Z + STO P + STO L + STO D Tie od etained artridge PIVOT PIN HD HOM PLTD D OSS FLTS B N L M F X + STO J L M W B W The ", " and " bore sizes have the tie rod nuts at both ends as shown. Tie rods thread into cap on all other bore sizes. ap Fixed levis Mount Style MP /" - " Bore Before determining dimensions: See chart on page for cylinder rod combinations that have removable cartridges. emovable artridge V Z + STO P + STO L + STO D PIVOT PIN HD HOM PLTD D OSS FLTS B N L M X + STO J L M W B W The ", " and " bore sizes have the tie rod nuts at both ends as shown. Tie rods thread into cap on all other bore sizes. od nd Dimensions see table Thread Style Small Male Thread Style Short Female Thread Style Intermediate Male Thread Style utomotive Male LL LL Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch. 0

75 atalog SB00- Mounting Information /" to " Bore Medium-Duty Pneumatic ylinders N Series Table nvelope and Mounting Dimensions dd Stroke Bore B D W NPTF S F J L L M M L P / / / / / / / / / / / / / #** # # #0 #0 #0 # / / / / / / / / / / / / / On /", " and /" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available. ** Port adapter fitting furnished at head end only. Table od nd Dimensions and nvelope Dimensions ffected By od Size Thread od xtensions and nvelope Dimensions ffected By od Size od Dia. Style & Style & dd Stroke Bore LL B D N V V VB W X Z / /-0 /-0. / / / / - -. / / / / / /-0 / /-0 /.... / / / / / / / / / / / / / / / / /- -. / / / / /. - - / / / / /.. / / / / / / - /- /. / / / / / - - /. / / / / / / / / / / / / /- - /- - - / /- - - /- / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / P- N od Lock

76 atalog SB00- Mounting Information " to " Bore Medium-Duty Pneumatic ylinders N Series Side Lug Mount Style MS " - " Bore US ZB + STO P + STO LB + STO BF ST SW SW TS SB HOLS SW SW V SW XS SU SS + STO SU J SW Side Tap Mount Style MS " - " Bore ZB + STO P + STO LB + STO BF TN NT THD, ND DP TPPD MT. HOLS V XT SN + STO J od nd Dimensions see table Thread Style Thread Thread Style Style Small Male Short Female Short Female Thread Thread Style Style Intermediate Intermediate Male Male Thread Thread Style Style utomotive utomotive Male Male LL LL Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch.

77 atalog SB00- Mounting Information " to " Bore Medium-Duty Pneumatic ylinders N Series Table nvelope and Mounting Dimensions dd Stroke Bore NPTF S J ND NT SB* ST SU SW TN TS US LB P SN SS 0 / 0 # # # / / / / / / / / / / / / / / *Upper surface spotfaced for socket head screws. Table od nd Dimensions and nvelope Dimensions ffected By od Size Thread od nd Dimensions and nvelope Dimensions ffected By od Size od Dia. Style & Style & ±.00 dd Stroke Bore LL B BF D N V VB XS XT ZB / - - / /- / / / / / / / / / / / / / / / / / / / / / / / / / / / / / - - /.. / / / / / / - - /..000 / / / / 0 / / / / / / / / /- - - /- - /- - - /- - - /- - /- - - / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / - /- /.. / / / / / / / / / / /- - / / / / / / / / / / / / / / etainer shape is square through " rod and round for /" - /" rods. P- N od Lock

78 atalog SB00- Mounting Information " to " Bore Medium-Duty Pneumatic ylinders N Series Head Square Mount Style M " - " Bore W ZB + STO P + STO LB + STO T BF T B HOLS V J ap Square Mount Style M " - " Bore W V ZJ + STO P + STO LB + STO T X + STO J T B HOLS od nd Dimensions see table Thread Style Thread Thread Style Style Small Male Short Female Short Female Thread Thread Style Style Intermediate Intermediate Male Male Thread Thread Style Style utomotive utomotive Male Male LL LL Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch.

79 atalog SB00- Mounting Information " to " Bore Medium-Duty Pneumatic ylinders N Series Table nvelope and Mounting Dimensions dd Stroke Bore B NPTF S J T LB P 0 / 0 / / / # # # / / / /..0.0 Table od nd Dimensions and nvelope Dimensions ffected By od Size Thread od nd Dimensions and nvelope Dimensions ffected By od Size od Dia. Style & Style & ±.00 dd Stroke Bore LL B BF D N V VB W X ZB ZJ 0 / / / / / / / / / / / / - - / / /- - - /- - - /- - /- - - /- - - /- - /- - - /- - - /- - / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / etainer shape is square through " rod and round for /" - /" rods. P- N od Lock

80 atalog SB00- Head Square Mount and Trunnion ap Square Mountings Mount " to " Bore " to " Bore Sizes Head Trunnion Mount Head Style Square MT Mount Style " - " M Bore " - " Bore UT Medium-Duty Pneumatic ylinders N Series TD W N Series Pneumatic ylinders ZB + STO P + STO LB + STO ZB + STO P + STO LB + STO BF TL T TL V X J ap Trunnion Mount Style MT " - " Bore UT TT SQ. T B HOLS F ZB + STO P + STO LB + STO J TD ap Square Mount Style M " - " Bore W TL Intermediate Fixed Trunnion Mount Model MT " - " Bore BF UM ZJ + STO P + STO LB + STO TL V XJ + STO ZB + STO P + STO LB + STO BD J T UV TD F BF X + STO J V T B J HOLS TL TM TL Dimension XI to be specified by customer. od od nd nd Dimensions see see table Thread Style Thread Thread Style Style Small Male Male Short Female Short Female Thread Thread Style Style Intermediate Intermediate Male Male Thread Thread Style Style utomotive utomotive Male Male LL LL Special Thread Style 0 Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are Special thread, extension, rod eye, blank, etc., are also available. also available. For additional information call your local Schrader Bellows Distributor. To To order, order, specify specify Style Style 0 0 and give give desired desired dimensions dimensions for for LL, or,, W, or W. or If. otherwise If otherwise special, special, furnish furnish dimensioned dimensioned sketch.

81 atalog SB00- Trunnion Mountings " to " Bore Medium-Duty Pneumatic ylinders N Series Table nvelope and Mounting Dimensions dd Stroke Bore BD NPTF S J TD TL TM UT UM UV LB P 0 / / 0 # # # / / / /..0.0 / / / / Table od nd Dimensions and nvelope Dimensions ffected By od Size Thread od nd Dimensions and nvelope Dimensions ffected By od Size od Dia. Style & Style & ±.00 XI dd Stroke Bore LL B BF D N V VB X (Min.) XJ ZB 0 / / / / / / / / / - - / / /- - - /- - - /- - /- - - /- - - /- - /- - - / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / - /- /.. / / / / / / / / / / / / /- - / / / / / / / / / / / / / / etainer shape is square through " rod and round for /" - /" rods. Dimension XI to be specified by customer. P- N od Lock

82 atalog SB00- Mounting Information " to " Bore Medium-Duty Pneumatic ylinders N Series ap Fixed levis Mount Style MP " - " Bore Z + STO P + STO LB + STO D PIVOT PIN M L V X + STO J L M W B W Tie od xtended Mount Style MX " - " Bore Model MX Head Tie ods xtended, Illustrated. Model MX ap Tie ods xtended; and Model MX, Both nds Tie ods xtended are also available. ll Tie od Models can be dimensioned from Model MX drawing at right. W ZB + STO P + STO LB + STO BF DD V BB J Models MX and MX not offered in " bore, rod diameters /", " and /". od nd Dimensions see table Thread Style Thread Thread Style Style Small Male Short Female Short Female Thread Thread Style Style Intermediate Intermediate Male Male Thread Thread Style Style utomotive utomotive Male Male LL LL Special Thread Style 0 Special thread, extension, rod eye, blank, etc., are also available. To order, specify Style 0 and give desired dimensions for,, W or. If otherwise special, furnish dimensioned sketch.

83 atalog SB00- Mounting Information " to " Bore Medium-Duty Pneumatic ylinders N Series Table nvelope and Mounting Dimensions dd Stroke Bore BB B D W DD NPTF S J L L M M LB P 0... / / / / / / 0 # # # / / / / / /...0 Table od nd Dimensions and nvelope Dimensions ffected By od Size Thread od nd Dimensions and nvelope Dimensions ffected By od Size od Dia. Style & Style & ±.00 dd Stroke Bore LL B BF D N V VB W ZB X Z / - - / /- / / / / / / / / / / / / / / / / / / / / / / / - - /.. / / / / - - /..000 / / 0 / / / / / / / / /- - - /- - /- - - /- - - /- - /- - - / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 0 0 / / - /- /.. / / / / / / / / /- - / / / / / / / / / / / etainer shape is square through " rod and round for /" - /" rods. P- N od Lock

84 atalog SB00- Spherical Bearing Mount /" to " Bore Medium-Duty Pneumatic ylinders N Series Spherical Bearing Mount Style MPU /" to " Bore Sizes Z + STO X + STO M LUBITION FITTIN MS D N X Thread dd Stroke od Style Style Dia. Bore D X M MS N X Z / / / / / / /-0 /-0 /-0 / / / / / / / /-0 / / / / -.00 / / - - / /.00 - / / / /.00 - / / / / - 0 / Maximum operating pressure at : design factor is based on tensile strength of material. Pressure ratings are based on standard commercial bearing ratings. Dimension D is hole diameter. Threads listed are also for a spherical rod eye which match style or style. The spherical rod eye pin diameter matches the cap pin and (if required) needs to be purchased separately; see N mounting accessories for detailed information. Max. Oper. psi

85 atalog SB00- Spherical Bearing Mount " to " Bore Medium-Duty Pneumatic ylinders N Series Spherical Bearing Mount Style MPU " to " Bore Sizes Z + STO X + STO M LUBITION FITTIN MS D N X od Style Style Dia. Bore D X M MS N X Z 0 / / / / / / / / / / / / - - /- Thread /- /- /- /- /- /- / / / Maximum operating pressure at : design factor is based on tensile strength of material. Pressure ratings are based on standard commercial bearing ratings. Dimension D is hole diameter. Threads listed are also for a spherical rod eye which match style or style. The spherical rod eye pin diameter matches the cap pin and (if required) needs to be purchased separately; see N mounting accessories for detailed information. / / / / dd Stroke / 0 0 / / Max. Oper. psi P- N od Lock

86 atalog SB00- ylinder ccessories offers a complete range of ylinder ccessories to assure you of the greatest versatility in present or future cylinder applications. ccessories offered Medium-Duty Pneumatic ylinders N Series for the respective cylinder include the od ye, Pivot Pin and levis Bracket. To select the proper part number for any desired accessory refer to the charts below. Spherical od ye Dimensions D L (Max) Lube Fitting X N Series Bore.0,.00,.0.,.00,.00 Part Number D X L J Thread JL Load apacity (lb) / , / J Thd Order to fit Piston od Thread Size. JL Pivot Pin Dimensions L D N Series Bore Part Number D L Shear apacity (lb).0,.00, ,.00, , Pivot Pins are furnished with () etainer ings. levis Bracket Dimensions FL M L M DD (X) W F W D ±.00 FL M L DD (X) W F W D ±.00 F F Fabricated Steel Order to fit ylinder ap or od ye. ast Ductile Iron N Series Bore Pin ast Ductile Iron Part Number Fabricated Steel Part Number D F W DD F FL L M M Load apacity (lb).0,.00, ,.00, ,

87 atalog SB00- Double od Models /" to " Bore Medium-Duty Pneumatic ylinders N Series To determine dimensions for a double rod cylinder, first refer to the desired single rod mounting style cylinder shown on preceding pages of this catalog. fter selecting necessary dimensions from that drawing, return to this page and supplement the single rod dimensions with those shown on the drawing and dimension table below. Note that double rod cylinders have a head (Dim. ) at both ends and that dimension LD or LF replaces L or LB. The double rod dimensions differ from, or are in addition to those for single rod cylinders shown on preceding pages and provide the information needed to completely dimension a double rod cylinder. On a double rod cylinder where the two rod ends are different, be sure to clearly state which rod end is to be assembled at which end. Port position is standard. If other than standard, specify position,, or when viewed from one end only. If only one end of these Double od ylinders is to be cushioned, be sure to specify clearly which end this will be. Specify XI dimension from rod end #. How to Use Double od ylinder Dimension Drawings -/" to " Bores Tie od etained artridge -/" to " Bores emovable artridge " to " Bores BF N W F V B ZM + X STO P + STO LD + STO F W + STO od nd # od nd # N V B ZM + X STO P + STO LF + STO + STO od nd # od nd # W ZM + X STO P + STO LD + STO P- N od Lock od nd # od nd # F F MDS MDT MDF MDX MDX MDF ll dimensions are in inches and apply to standard rod sizes only. For alternate rod sizes, determine all envelope dimensions (within LD dim.) as described above and then use appropriate rod end dimensions for proper rod size from single rod cylinder. od dd Stroke dd X Stroke Dia. Bore LD LF SS ZM / / 0 eplaces: On single rod mounting styles: LB / L ll Mtg. Styles / SS MS / / 0 ll Mtgs.

88 atalog SB00- lignment oupler lignment oupler Medium-Duty Pneumatic ylinders N Series See Table for Part Numbers and Dimensions M Table Part Numbers and Dimensions Part No. B D F H J M Max. Pull Load (lb) pprox. Weight (lb) 00 /- / / / / / / / /. 00 /-0 / / /-0 / / / / / / / / / / / / / / / /. 0 - / / / / / / /- / / / / How to Order Linear lignment ouplers When ordering a cylinder with a threaded male rod end, specify the coupler of equal thread size by part number as listed in Table, i.e.; Piston od or LL dimension is " - ", specify coupler part number 00.

89 atalog SB00- ccessories Medium-Duty Pneumatic ylinders N Series od levis Order to Fit Thread Size of Piston od* N Part Number N-0 N-0 N-0 N-0 N-0 od Dia. / Thread Size LL - - /- - - Dimensions in Inches B D W / / / / / / D Schrader Part Number D D D D ød W B W LL od ye Order to Fit Thread Size of Piston od* N Part Number N-0 N-0 N-0 N-0 N-0 od Dia. / / Thread Size LL - - / / /.... / / / / / / Dimensions in Inches B D J / / / / / / / / / / / ye Bracket Order to Fit Pivot Pin Size (D)* N Dimensions in Inches Part Number D B DD F FL L N-0 N-0 N-0 N-0 N- N- / / / D M / / Schrader Part Number Schrader Part Number L D D D D J ø D DD M F M FL ød ø LL SQ. B B SQ. P- N od Lock levis Bracket for od ye Order to Fit Pivot Pin Size (D)* N Dimensions in Inches Schrader Part Part Number N-0 N-0 N-0 B / D / W / DD / / / / F FL L / / M / M / /.0.. Number N-0 / / / N-0 / / / / N-0 / / / / / * ccessories listed on this page will attach current Ford specification rod thread and bore sizes. For sizes outside the current for specification see page 0. FL M M L F ød W B ø DD HOLS W

90 atalog SB00- ccessories / ylinder its Pivot Pins and Jam Nuts Sizes to fit current Ford specification cylinders Pivot Pins with etaining ings Jam Nut Medium-Duty Pneumatic ylinders N Series Ford Part Number N-0 N- N- N- N- N- Dimensions in inches D / L / / Schrader Part Number Pivot Pins are furnished with levis Mounted ylinders as standard.. Pivot Pins are furnished with () retaining rings.. Pivot Pins must be ordered as a separate item if to be used with nuckles od levises or levis Brackets. L Pivot Pin D Ford Part Number N/ N/ N/ N/ N/ Dimensions in inches Thd. B - - /- - - / / / / THD D / / / / Schrader Part Number D B ylinder its For current Ford specification cylinders artridge ssembly Jam Nut ylinder Seal Bore its / N-0 N-0 / N-0 N-0 N-0 N-0 N-0 N-0 0 N-0 N-0 s ontain Items through Schrader Part Numbers s s s ontain Items through & etaining ing, ushion Insert and ushion dj. Seal Bore /, / /,, /,,,,,,, /,,,,, 0,,, 0,,, 0, od / artridge ssembly N-00 N-00 N-00 N-00 N-00 N-00 N-00 N-00 N-00 Schrader Part Number ylinder Seal its ontain: (ea.) # Tube Seals (ea.) # Piston Seals (ea.) # Wear ing artridge ssembly ontains: (ea.) # od artridge (ea.) # od Wiper (ea.) # od Seal (ea.) # od artridge Seal USH. DJ. SW

91 P- atalog SB00- Mounting Styles / Order Notes Medium-Duty Pneumatic ylinders N Series In line with our policy of continuing product improvement, specifications in this catalog are subject to change. vailable in all bore and rod combinations. Side Lug Side Tap Mounting Styles and Ordering Notes vailable in all bore and rod combinations through " bore. "-" bores supplied as Head Square (M) and ap Square (M) mounts. Head ectangular Flange ap ectangular Flange MS MS MF MF Tie ods xtended Trunnion Mounts Head Square Flange ap Square Flange Both nds MX ap nd MX Head nd MX MP M ap Fixed levis Pivot Pin Included Head Square Head MT ap MT Intermediate Fixed MT MPU M Double nd onstruction Spherical Bearing ap Square MF od Bearing artridges = emovable artridge T = Tie od etained artridge *MF, MF, MF, MF not available in these bore sizes. M and M available in -" bore only. Bore / / * 0* * od Dia.,,, /, /, / - / - - /, / - / - / MF MX MX MX MS MS MF MF MT MT MT MPU MP T T T T T T MF MF T T T T T T T T T T T N/ N/ N/ N/ M M N/ N/ N/ N/ N/ N/ N/ N/ N/ N/ N/ N/ N/ N/ N/ N/ N/ N/ N/ N od Lock vailable in all bore and rod combinations in the following mounting styles: MDS, MDS, MDX, MDX, MDT, MDT, and MDF ("-"). MDF ("-") and MD ("-").

92 atalog SB00- Order ode Medium-Duty Pneumatic ylinders N Series How To Order By Model Number N Pneumatic ylinders can be specified by model number by using the tables shown at right. Selections in bold type indicate current Ford standard.. Type Select the Model Number ode which identifies single, double end.. Bore & od Diameter Select the Model Number ode which identifies the desired bore size and rod diameter combination.. Mounting & ushioning Select the Model Number ode which identifies the desired mounting style and cushioning option.. od nd Style Select the Model Number ode which identifies the desired rod end thread style.. Seal Type omplete the Model Number by selecting the type of seals desired.. Stroke Length It is necessary to specify the stroke length desired following the Model Number. For example: F0 with " stroke. Specifying the Desired Trunnion Location For cylinders with intermediate trunnion mounting, the dimension specified should be the distance from the piston rod reference point to the center-line of the pin. The xample Would Identify: single end pneumatic cylinder, -/" bore size, " piston rod diameter, side lug mount, cushioned both ends, with automotive male rod thread, Buna N Seals, and a " stroke. Optional Mounting ccessories Specify separately the part number for desired optional mounting accessories. Model Number Type Pneumatic Steel Tube Single nd with NPT port F Double nd with NPT port FB Single nd with S port N Double nd with S port NB Bore od Model No. Size Dia. ode /" " 0 " " " B0 " B " B /" " 0 " " " " " D " D " D " D " " " " " /" " " F " F " F " F /" F " F /" F " " " " /" " /" " Bore od Model No. Size Dia. ode " " J " J " J /" J " J /" J " J /" J " J /" J 0" " " /" " /" " /" " /" " L /" L " L /" L " L /" L " L /" L Model Number ode NFP Non- ush. ush. ush. Mounting Style Style ush. Head ap Both Side Lug MS Side Tap MS Head ectangular Flange ( /-) MF ap ectangular Flange ( /-) MF Head Square Flange ( /-) MF 0 ap Square Flange ( /-) MF Head Square (-) M 0 ap Square (-) M Tie ods xtended Both nds MX Tie ods xtended ap nd MX 0 Tie ods xtended Head nd MX Head Trunnion MT 0 ap Trunnion MT Intermediate Fixed Trunnion MT 0 ap Fixed levis MP Spherical Bearing MPU 0 NO MOUNT MX0 od nd Style Model Number ode Small Male Short Female Intermediate Male utomotive Male Special Specify 0 Seal Type Model Number ode Buna N Seals Fluorocarbon Seals Model Number xample: F 0 S W/"Stroke Special Features S Specify Stroke Length.00"

93 od Lock N P- od Lock For N & P- Series Pneumatic ylinders ontents Features, Benefits, Value...0 Mounting Styles / Standard Specifications... How to Select / Push & Pull Forces... od Lock onnection / Specifications... Weight of ylinder with od Lock... Mounting Information Double od nd Models...0 Style Piston od nd... ylinder ccessories N..., - P-..., 0- od Lock emoval and Installation...0 How to Order...0 N...0 P-... 0

94 atalog SB00- Features, Benefits, Value Pneumatic ylinders N & P- Series with od Lock Benefits of using a piston od Lock include: Prevents rod movement upon release of stored energy liminates the need for pilot operated check valves for load holding liminates complicated piping between pilot operated check valves and the cylinder ir port for od Lock release. Manual override shaft allows release of the od Lock independent of pneumatic controls. The override is spring loaded and engages the rod lock when the wrench is removed and the air signal is absent. Breather port. N or P- Series heavyduty pneumatic cylinder. Piston rod extension and od Lock pilot conform to NFP dimensions. Fluorocarbon rod wiper cleans rod on retract stroke and excludes contamination from the od Lock. Light weight aluminum od Lock body is anodized for corrosion protection. od Lock Features True Bolt-on Modularity the cylinder is built and tested as a stand alone unit. The od Lock is then assembled and tested at rated holding force. Large od Lock lamping Surface provides uniform force to the rod contact area. This allows holding forces to resist 00 psi input on the cylinder cap end for most bore and rod combinations. Spring-engaged, air-released operation ensures positive holding in power-off situations with minimal air volume required for release. Manual release is standard cam operated release disengages the od Lock with a simple turn of a hex bolt. The default-to-lock function springs back to the engaged position when released. od Lock is sealed to withstand harsh environments NM X rating protects internal components from contamination 0