AC Switches: ML & MN Series DC Switches: MDC1A Series
|
|
- Roxanne Wilson
- 5 years ago
- Views:
Transcription
1 AC Switches: ML & MN Series DC Switches: MDC1A Series Australian & New Zealand Distributor Leveltec Engineering Pty Ltd Gloucester P: F: Sydney P: F: NZ Office P: F: website:
2 MERZ ML SERIES COMPACT ON/OFF AC SWITCHES FOR INDUSTRIAL AC APPLICATIONS High quality and long endurance safety switch Wide range up to 125 Amps, 690 Vac Suitable as main or emergency switch According IEC 60947, UL508, CSA 22.2, ccsaus standards Robust modular design High quality contacts: guarantee superior long life performance Maintenance free High performance even under hardest enviromental conditions Solutions as Repair / Maintenance switch in plastic and aluminium enclosures, even with EMC compatibility Many mounting options and accesories available
3 MERZ ML SERIES COMPACT ON/OFF AC SWITCHES FOR INDUSTRIAL APPLICATIONS How to select the switch 1. Select ratings 2. Mounting position Series Ie AC21-A AC-23 A/B AC-3 Ue 690 V 400 V 3Ø 400 V 3Ø ML ,5 kw 7,5 kw ML kw 9 kw ML kw 11 kw ML kw 22 kw ML kw 30 kw ML kw 37 kw Poles Mounting 3 or 4 Front ( E ) 3 or 4 Base ( V ) Handle type and mounting method Description Padlockable three locks Emergency Front mounting 2 holes 4 holes 22,5 & 30mm screw Base mounting Screw Snap-on Din Rail Interlock function No interlock Door interlock Cover interlock Padlockable 1 or 2 locks 5. Accesories Non lockable Open or Enclosed Open Enclosed Aluminum IP65 Enclosed Plastic indoor IP65 Enclosed Plastic outdoor IP Stainless Steel IP66 Threaded Entries Accessories Neutral switched Auxiliary contact 1NO+1NC Additional switching contact Terminal cover PE Terminal Extension Shaft N-Terminal Front plate 2 x Neutral switched Legend plate Isolation labels Custom legend plate
4 MERZ MN SERIES CAM AC SWITCHES FOR INDUSTRIAL AC APPLICATIONS Recognized specialist manufacturer of cam switches since 1946 Robust modular design using chambers which fit one, two or three contacts with double interrupt conduct paths High quality contacts: guarantee superior long life performance Maintenance free High performance even under hardest enviromental conditions Wide range up to 125 Amps and up to 690 Vac Many standard switch configurations available: main/emergency, change over, step, group, star delta, voltemer and ammeter, among others. Undervoltage release and spring return features available. Custom solutions adapted to the application needs. Encapsulated solutions for indoor and outdoor applications in plastic and aluminium enclosures, even with EMC compatibility Many mounting options and accesories available According international standards IEC 60947, UL508, CSA
5 MERZ MN SERIES CAM AC SWITCHES FOR AC INDUSTRIAL APPLICATIONS How to select the switch 1. Serie ratings Series Ie AC21-A Ue AC-3 AC-23A (B) A 400 V 3Ø 400 V 3Ø V 2,2 kw 2,2 kw V 5,5 kw 7,5 kw V 5,5 kw 7,5 kw V 5,5 kw 7,5 kw V 7,5 kw 11 kw V 11 kw 15 kw V 18,5 kw 22 kw V 37 kw 37 kw V 45 kw 45 kw 2. Typical contact arrangements On/Off switches Change-over switches Step switches Group switches Voltmeter/ ammeter switches Reversing switches Single phase starters Star / Delta switches Multi speed switches
6 MERZ MN SERIES CAM AC SWITCHES FOR INDUSTRIAL AC APPLICATIONS 3. Handle type and mounting method Description Padlockable three locks Padlockable 1 or 2 locks Front mounting 2 holes 4 holes 22,5 & 30mm screw Base mounting Screw Snap-on Din Rail Interlock function No interlock Door interlock Cover interlock 4. Accesories Non lockable Open or Enclosed Open Enclosed Aluminum IP65 Enclosed Plastic indoor IP65 Enclosed Plastic outdoor IP Stainless Steel IP66 Threaded Entries Extension shafts Protecting covers PN and N terminals Undervoltage release Heavy current connectors Switch couplings Blade terminals Front plates Din rail clip Gold plated contacts
7 REPAIR/MAINTENANCE ML & MN SERIES AC SWITCHES FOR INDUSTRIAL AC APPLICATIONS AC ISOLATORS: I thermal enclosed MN SERIES Series Ithe A ML SERIES Series Ithe A ML ML ML ML ML ML ML Enclosures ML Series Plastic IP65 indoor ML Series Plastic IP65 outdoor MN SERIES I type plastic IP65 indoor/outdoor MN SERIES I type black/gray Indoor IP65 MN SERIES- I Type: Backside cable glands EMC Accesories Plastic & Aluminium With CEE plugs, IP54 Aluminium Cast IP65 Aluminium side handle Specials: F300, etc
8 MERZ MDC1A SERIES DC SWITCH DISCONNECTOR FOR SOLAR DC APPLICATIONS Robust and modular design Very short shutting off time High quality contacts: guarantee superior long life performance Maintenance free Wide range up to 45 Amps, 1000 VDC According IEC 60947, CCC and UL508i standards Suitable for multi MPPTs configurations DC//AC combinations available Very compact: easy to integrate in inverters and combiner boxes High performance even under hardest enviromental conditions: high temperature and/or humidity Many mounting options and accesories available Custom solutions under request
9 MERZ MDC1A SERIES DC SWITCH DISCONNECTOR FOR SOLAR INDUSTRY Ratings according to IEC & -3 Type MPPT V dc MDC1A front or base mounting 1 A dc MDC1A front or base mounting 1 A dc 40 (45) 40(45) MDC1A front or base mounting 1 A dc MDC1A front or base mounting 2 A dc MDC1A front or base mounting 2 A dc 40 (45) 40 (45) MDC1A front or base mounting 2 A dc MDC1A front or base mounting 3 A dc MDC1A base mounting 3 A dc Ratings according to UL508i Type MPPT 600 Vdc 850 Vdc 1000 Vdc MDC1A front or base mounting 1 25 A MDC1A front or base mounting 1 45 A 36 A 32 A MDC1A front or base mounting 2 25 A MDC1A front or base mounting 2 45 A 36 A 32 A MDC1A front or base mounting 3 25 A MDC1A base mounting 3 45A 36 A 32 A Standard mounting types Din rail mounting. Distribution board 2/4 holes front mounting Central mounting 16mm Din rail mounting with door interlock Central mounting 22 or 30,5mm Enclosed switches ready to install
10 MDC1A SERIES DC SWITCH DISCONNECTOR FOR SOLAR DC INDUSTRY DC ISOLATORS: Series 89xx and specials MDC1A series can be supplied in a robust IP65 enclosure Suitable for being used under the hardest environmental conditions Series 89xx IP65, indoor use 89xxC IP 65, UV resistant, outdoor use 89xx & 89xxC series come with pre cut knock.outs making easier its installation on field. Transparent lids are also available Generous spacing inside enclosures helps installation and ensures a proper heat disipation Interlocking function available under request Special solutions with photovoltaic terminals, cables, and protection may be supplied under request Please consult us in case of any specific requirement
11 NOTES
12 Australian & New Zealand Distributor Leveltec Engineering Pty Ltd Gloucester P: F: Sydney P: F: NZ Office P: F: website: Merz Schaltgeräte GMBH+CO KG D Gaildorf GERMANY-EUROPE Tel: Fax: Subject to technical modifications
DISCONNECT SWITCHES (16 TO 630 amp)
I DISCONNECT SWITCHES (16 TO 630 amp) Springer Controls is partnered with MERZ-PCE, a world leader in the manufacturing of switch gears. We carry a complete line of UL approved, CSA listed, Disconnect
Contact gap 7 mm (norm >5.5 mm) ÿ IN ENCLOSURE. ÿ WITH CLUTCH DRIVE
Switch disconnectors A modular and flexible range Contact gap 7 mm (norm 5.5 mm) Reversible terminal feature ÿ IN ENCLOSURE - Degree of protection: up to IP 66 - For 25A to 100A size switches (see Ithe
JCAM SWITCHES. Model Ratings / Product Numbering System...J2 Technical Data...J3
Springer Controls is partnered with MERZ-PCE, a world leader in the manufacturing of switch gears. We offer complete line of Cam Switches with as many as 24 switch contacts. Each contact has two fixed
Emergency stop As an emergency switching off/emergency stop device. Standards According to IEC/EN , VDE 0113 Part 1
MainswitchSurfacemounting Partno. T0-2-8900/I1/SVB Articleno. 207151 CatalogNo. CT02-8900-I1CRQ Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual
SAFETY SWITCHES / ISOLATORS A TECHNICAL DATA
ENCLOSED SWITCHES SAFETY SWITCHES / ISOLATORS 16-800A TECHNICAL DATA Safety switches / isolators 10A 16A 25A 40A 63A 80A 125A 160A 200A 250A 315A 400A 630A 800A Rated Insulation voltage Ui (V) 690 690
Switches Section 1. Load Break Switches. Accessories for Load Break Switches. 4 Pole Part Price Each Reference
Load Break Switches According to BS EN60947-3 High Thermal & Dynamic Strength Fully rated suitable for distribution & motor loads Auxiliary contacts also available Fully Visible Breaking Arduous categories
Emergency stop without emergency switching off/emergency stop function. Locking facility Lockable in the 0 (Off) position N/O 0 B 0
MainswitchSurfacemounting Partno. T0-2-1/I1/SVB-SW Articleno. 207148 IP65 Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual override switches
Clarian uk ltd SWITCHES AND CONTROLS TOP-TECHNIC TOP-TECHNIC TOP-TECHNIC TOP-TECHNIC TOP-TECHNIC TOP-TECHNIC.
SWITCHES AND CONTROLS TOP-TECHNIC TOP-TECHNIC CONTROL UNITS SWITCH DISCONNECTORS & CAM SWITCHES TOP-TECHNIC TOP-TECHNIC EMERGENCY STOP MAIN SWITCHES MAIN SWITCHES TOP-TECHNIC TOP-TECHNIC CAM SWITCHES FOR
Load break switches. Load break switches for all your applications... Why choose a load break switch designed for photovoltaic applications?...
Load break switches Load break switches for all your applications.................................... Why choose a load break switch designed for photovoltaic applications?............. Load break switch
LOCAL SWITCH-DISCONNECTORS STANDARD DUTY, TYPE RDMP, 20-63A, IP65, 2-8 POLES TECHNICAL DATA
LOCAL SWITCH-DISCONNECTORS STANDARD DUTY, TYPE RDMP, 20-63A, IP65, 2-8 POLES Complying with BSEN60947 and IEC 408 the RDMP range of rotary cam switches are suitable for on load switching of general distribution
Switch Disconnectors
Switch Disconnectors Reversible terminals allow the same switch body to be used in both front & rear mount applications 25A - 32A - 50A - 63A - 80A - A versions available Neutral pole, additional poles
SERIES D DISCONNECTS SWITCHES. 16 Amp Amp 600 & 1000 Volt. Featuring:
SERIES D DISCONNECT SWITCHES 1 Amp 0 Amp 00 & 0 Volt Load Make/Load Break Positive Opening Compact Size Modular Construction Horse Power Rated Custom Versions Featuring: Auto Alignment Shaft Wide Handle
BETA Switching Switches and Light Indicators
Siemens AG 2008 BETA Switching /2 Product overview /3 5TE8 control switches / 5TE4 pushbuttons /2 5TE5 light indicators /5 5TE8 ON/OFF switches /22 5TE9 busbars /24 5TE switch disconnectors Siemens ET
The complete offer Enclosed switch-disconnectors / Isolators
June 2009 The complete offer Enclosed switch-disconnectors / Isolators May 29, 2009 Slide 1 Contents Why use enclosed switch-disconnectors Applications and application demands The ABB products and features
Approvals UL 508; CSA-C22.2 No ; IEC/EN ; CE marking
MainswitchRearmounting Partno. T0-2-1/V/SVB-SW Articleno. 045992 Front IP65 Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual override switches
Enclosed switches and safety switches Main Catalogue. 2CMC341002D0002 January 2009
Enclosed switches and safety switches Main Catalogue January 2009 Enclosed switches and safety switches Contents General description/technical data... 4 Ratings... 8 Switch-disconnectors / isolators Plastic
Commando Safetyswitch
80 Commando Safetyswitch Commando Safetyswitches are manufactured from Polybutylene Terephthalate (PBT) for maximum impact resistance. The range offers a selection of IP54 and IP65 ratings to cover a variety
Junction boxes for control, monitoring and control panel Ex tb
Junction boxes for control, monitoring and control panel - Zone 21, 22 - Category 2D - Aluminium, reinforced polyester or stainless steel enclosures - Standard or custom products Inspection window Padlockable
Non-fusable disconnect switches standards UL and CSA from 16 to 100 A
Non-fusible disconnect switches sircm_132_a sircm_133_a The solution for > Industrial control systems Rotary switch SIRCO M 3 x 80 A Toggle switch SIRCO M 3 x 80 A + 2 auxiliary contacts Competitive advantages
SIRCO M and MV Universal load break switches from 16 to 160 A
SRCO M and MV from 16 to 16 A The solution for Load break switches sircm_99_a > Main incoming load break > Distribution load break > Machine control > Local safety load break sircm_13_a 4 pole SRCO MV
KATKO Safety Switches:
KATKO Safety Switches: Reliability, Economy, Safety KATKO/2007.01/AL 1 KUM 16-25A Dimensions: Overall: 130,4 x 96,4 x 42,0 Mounting holes: 118,0 x 84,0 -Polycarbonate or ABS IP65 enclosure -Excellent UV
SIRCO MV PV Load break switches for photovoltaic applications for use up to 1000 VDC from 63 to 80 A
Load break switches SIRCO MV PV sircm-pv_010_a_1_cat The solution for > Residential buildings > Buildings > Solar parks Strong points SIRCO MV PV 1000 V - 80 A direct operation > Modular device > Patented
SWITCH FUSES 3KL71 from 32A to 800A Description
from 32A to 800A Description SWITCH FUSES 3KL71 3KL71 is a range of load-break switches suitable for making and breaking on load and disconnetting low voltage electrical circuits. They are commonly used
Solar Installer Range. Bright solutions
Solar Installer Range Bright solutions IMO is at the forefront of control component technology specifically developed for the renewable energy market and in particular solar energy. Whether meeting the
Selection Guide Motor Control Device Solutions
Selection Guide Motor Control Device Solutions Expect more and get it from c3controls. Our portfolio of Motor Control Devices consists of worldclass products designed and manufactured to meet your requirements
Low Voltage Products. Enclosed switches. Brochure OT_KSE 1 GB 05_02 1SCC340007C0201
Low Voltage Products Enclosed switches Brochure OT_KSE 1 GB 05_02 O I N O SafeLine OF F 2 I Enclosed switches Contents: General... 4 Technical data... 5 Switches in plastic enclosure General... 6 Ordering
SIRCO UL98 Non-fusible switches standards UL and CSA 100 to 1200 A
Non-fusible disconnect switches SIRCO UL98 Non-fusible switches standards UL and CSA sirco-ul_022_b_1_cat The solution for > Power distribution sirco_093_b_1_cat SIRCO 3 x 200 A Strong points > Reliability
An innovative technology
The range An innovative technology Description The new are load break switches that combine attractive style and optimised features due to their innovative design. This range, dedicated to industrial applications,
Non-Fused Load Break Switches FSSC, SX, SXDC, SC
UL 98 Non-Fused Load Break Switches Mersen disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty switches are designed with the most up-todate disconnect
Switch-disconnectors OTDC and OTDCP
PROTECTION AND CONNECTION Switch-disconnectors OTDC and OTDCP Switches for photovoltaic and ESS applications Designed for harsh environments Compact and modular design Reduced power losses Switch-disconnectors
SIRCO UL98 Load break switches standards UL and CSA 100 to 1200 A
The solution for Load break switches sirco-ul_022_b_1_cat > Power distribution. Strong points sirco_093_b_1_cat SIRCO 3 x 200 A > Reliability. > Safety of property and personnel. > Simplicity. > Easy assembling.
C60H-DC. C curve IEC Direct current (DC) Breaking capacity (Icu) according to IEC Type 1P 110 V 220 V 250 V 440 V 500 V
DC circuit supplementary protectors for feeders / distribution systems C60H-DC C curve DB123430 DB123525 DB405571 IEC 60947-2 PB107193-34.eps PB107194-34.eps The C60H-DC supplementary protectors are used
PANEL PANEL MOUNTING COMPONENTS
PANEL PANEL MOUNTING COMPONENTS For conventional wiring, Wöhner offers a comprehensive range of panel components for fastening to a DIN rail or mounting plate. The fuses and associated connection technology
PowerLine OS Switch Fuses A, 690V
Technical Brochure PowerLine OS Switch Fuses 20...160 A, 690V Brochure OS 10 GB 99-04 9902CD04 ABB Control New Switch Fuse Range 2 3 Total user safety Total user safety Fuse carriers fully IP20 protected
For many applications
Series 40 Amp Rugged and dependable 40 amp switches for industrial applications Sprecher + Schuh s rugged rotary cam switches are available for most control and load applications up to 40 amps. A well
Non-Fused Load Break Switches FSSC, SX, SXDC, SC
Non-Fused Load Break Switches FSSC, SX, SXDC, SC UL 98 Non-Fused Load Break Switches Mersen disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty
Enclosed DC rated switch-disconnectors OTDCP from 16 to 32 Amperes
Protection and Connection Enclosed DC rated switchdisconnectors OTDCP from 16 to 32 Amperes Enclosed OTDC switches from 16 to 32 Amperes meet the demanding requirements of photovoltaic applications. Enclosed
Safety switches for hinged doors
4C Safety switches for hinged doors Selection diagram CONTACT BLOCKS 18 7 9 20 overlapped 1NO+ FD FL FC 21 22 33 34 2NO+1NC 3NC CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland assembled
SWITCH DISCONNECTORS PLANET -SWITCH.
SWITCH DISCONNECTORS 6A to 600A ratings Versions: direct operating handle, door coupling and in housing Wide range of accessories Types for photovoltaic applications up to 50A. PLANET -SWITCH SEC. PAGE
Product Specification Sheet #3LD2.1
Product Specification Sheet #3LD2.1 Enclosed Non-Fusible Rotary Disconnect Switch 16 30 Amp, Type 12K Industrial and Type 4X Non-Metallic Enclosures General Information and Horsepower Ratings Shipping
Euroload Changeover Switch
Euroload Features: Quick make & quick break mechanism. High electrical & mechanical endurance. Advance neutral. Enclosed housing to avoid dust ingress. Staggered terminals upto 800A. Load and Line reversibility.
Wastewater Solutions. DECONTACTOR TM Series. Featuring Meltric s. Switch Rated Plugs, Receptacles and Electrical Connectors
Wastewater Solutions Featuring Meltric s DECONTACTOR TM Series Switch Rated Plugs, Receptacles and Electrical Connectors Meltric DECONTACTOR TM Series Plugs & Receptacles Decontactors are a combination
Breakers and switches. Enclosed switches Heavy duty safety switches Fusible and non-fusible Amperes
Breakers and switches Enclosed switches Heavy duty safety switches Fusible and non-fusible 30 1200 Amperes Heavy duty fusible and non-fusible safety switches 30 1200 Amperes Features, product overview
IP44 - IP66 Rated RCD, Power & Cable Management
IP44 - IP66 Rated RCD, Power & Cable Management IP54 Rated 10 amp Switches IP66 Rated 10 amp Switches IP66 Rated 13 amp Sockets IP66 13 amp RCD switched Socket IP66 13 amp unswitched socket with timer
FL series position switches
FL series position switches Selection diagram 0 08 0 9 0 0 0 Ball Ø. External rubber Ball Ø 8 mm, mm, stainless Glass fibre rod gasket stainless steel steel Adjustable lever Adjustable safety lever Bistable
Page 2-4 Page 2-8. Page Page 2-13
Page -4 Page -8 THREE-POLE CONTACTORS IEC Ith ratings in AC1 duty at 40 C: 16 to 1600A IEC Ie ratings in AC3 440V duty: 6 to 630A IEC Power ratings in AC3 400V duty:. to 335kW UL/CSA ratings: 3 to 500HP
Products and solutions for photovoltaic applications
Products and solutions for photovoltaic applications Components for string and interface control panels Switch disconnectors Surge protection devices Fuse holders The range of LOVATO Electric components
The compact LO series of switches range from 16A to 63A, and NT series of disconnects from 63A to 250A.
Disconnect Switches Disconnect Switches are control devices used to turn power ON-OFF on most machines, control panels, HVAC equipment. Many models feature a lockout to prevent unauthorized use. These
Rotary Cam Switches. Rotary Cam Switches
Rotary Cam es Series... 2 Handle Assemblies... 8 Accessories... 12 Circuit Diagrams, Technical Information & Dimensions (Online)... 13 Series R-Line Rotary Cam es... 24 Handles and Accessories... 27 Circuit
INDUSTRIAL PLUGS. FIND ALL INFORMATION ON OUR WEBSITE: marechal.com. Dimensions and certificates
INDUSTRIAL PLUGS A range from 16 A to 600 A 1000 V. Automatic watertightness from IP44 to 66/67. From -40 to +240 C. GRP or metal casing. Reliable & compact. FIND ALL INFORMATION ON OUR WEBSITE: marechal.com
Add-on blocks and accessories For BG series mini-contactors For BF series contactors For B series contactors...
Three-pole versions up to 630A in IEC AC3 duty Four-pole versions up to 1600A in IEC AC1 duty Versions for power factor correction up to 100kvar at 400VAC Four-pole versions with NO+NC or 4NC main poles
Page. Circuit-Breakers M4 2 for motor protection. Auxiliary contacts 3 Signalling switch Auxiliary releases
Circuit Breakers M4 Page Circuit-Breakers M4 2 for motor protection Auxiliary contacts 3 Signalling switch Auxiliary releases Insulated 3-pole busbar system 4 Terminal block DIN-rail adapters 5 Busbar
Plugs and Sockets SolConeX & CES Series 7570, 7571, 7575, 7579, 7581
Plugs and Sockets SolConeX & CES Series 7570, 7571, 7575, 7579, 7581 www.stahl.de > For use in Zones 2 and 22 > Various versions 16 A, extra-low voltage 16, 32, 63, 125 A > Large handle, can be locked
Fuse holders and fuses
Modular size for 10x38, 14x51 and 22x58mm fuses Finger safe - IEC IP20 degree of protection against accidental contact with live parts and with sealable cover for operators safety Version with status indicator
SIRCO MC PV. Solar Disconnect Switch up to 40 A, up to 1000 Vdc
SIRCO MC PV Solar Disconnect Switch up to 40 A, up to 1000 Vdc Your guarantee for safe & reliable switching of photovoltaic circuits Taking into account the specificity and technical constraints of solar
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS STANDARD METAL CLAD INDOOR VCB TECHNICAL DATA Rated Voltage (Ur) in kv 12 Rated Normal Current (Ir) in Ampere 630/1250 Rated Frequency (fr) in Hz 50 Rated Insulation level (1 min)
SIRCO M UL 508 Non-fusible disconnect switches standards UL and CSA from 16 to 100 A
Non-fusible disconnect switches SRCO M UL 58 sircm_132_a sircm_133_a The solution for > ndustrial control systems Rotary switch SRCO M 3 x 8 A Toggle switch SRCO M 3 x 8 A + 2 auxiliary contacts Strong
SD Series Non-Fused Load Switches
SD Series Non-Fused Load Switches The SD1 and SD2 series of non-fused load switches are listed as Manual Motor Controllers and are designed for use in local motor isolation. The SD series of modular load
Kraus & Naimer Ltd. BLUE LINE switchgear
Kraus & Naimer Ltd. BLUE LINE switchgear IRL short Form Catalogue www.krausnaimer.ie Made in Ireland KRAUS & NAIMER The development of the Blue Line rotary switch, contactor and motor starter product ranges
xboard safety, reliability effectively combining and performance safety, reliability and performance in commercial and industrial applications
xboard commercial and industrial panelboards xboard effectively combining safety, reliability and performance safety, reliability and performance in commercial and industrial applications NEW xboard (xdb)
MSW. MSW Catalog Number Sequence. Standard Features MSW 25 B- 3
Introducing the New WEG Series. The was developed according to IEC 60947-3 & UL508. The compact, reliable design of the allows the operator to safely disconnect power and isolate the circuit within the
LK Position Switches TECHNICAL DATASHEET.
LK Position Switches Technopolymer housing, one conduit entry Protection degree IP6 according to EN 60529 contact blocks available 46 actuators available Versions with stainless steel external parts Versions
Switch-disconnectors OTDC and OTDCP Switches for photovoltaic applications
Protection and Connection -disconnectors OTDC and OTDCP for photovoltaic applications -disconnectors OTDC and OTDCP for photovoltaic applications DC swi-disconnectors Premium performance for DC applications
Circuit-Breakers M4 166 for motor protection. Auxiliary contacts 167 Signalling switch Auxiliary releases
Index Page Circuit-Breakers M4 166 for motor protection Auxiliary contacts 167 Signalling switch Auxiliary releases Insulated 3-pole busbar system 168 Terminal block DIN-rail adapters 169 Busbar adapters
Standard Interlock Safety Switches
Subminiature Only 78 x 30 x 1m Two actuator entrances provide flexibility for installation options Integrated molded cable reduces wiring time IP67 (IEC60529) Direct Opening Action Actuators comply with
Enclosed Switches and Safety Switches
Enclosed Switches and Safety Switches Enclosed Switches and Safety Switches Contents General information... 2 Description... 5 Ratings... 8 Plastic enclosed switches and safety switches...11 Metal enclosed
Load Break Disconnect Switches FSLBS
Load Break Disconnect Switches FSLBS UL 508 Non-Fused Load Break Switches The FSLBS Load Break Switch is a newly designed industrial-grade switch capable of making or breaking loads up to 600V. It is suitable
Switches Unlimited Phone: * Fax:
For Info: sales@switchesunlimited.com www.switchesunlimited.com Phone: 800-1-0487 Fax: 718-67-6370 Page -4 Page -8 THREE-POLE CONTACTORS IEC Ith ratings in AC1 duty at 40 C: 16 to 1600A IEC Ie ratings
EQUIPMENT FOR CONNECTION OF A PHOTOVOLTAIC INSTALLATION (UP TO 5 KW)
Catalogue photovoltaic installations 2005 EQUIPMENT FOR CONNECTION OF A PHOTOVOLTAIC INSTALLATION (UP TO 5 KW) "POSSIBILITY OF ASSEMBLY FOR BIDIRECTIONAL ELECTRONIC MONOPHASE METER FOR ALL VERSIONS". MODULAR
ELECTRICAL PANELS. Chap.
ELECTRICAL PANELS 360 Panel System Electrical Panels 360 Panel System Modular Panels DC Electric Panels AC Electric Panels AC/DC Electric Panels Aber Marine Panels IP 67 Watertight Panels Rotary Switch
Contents. Volume 5 Motor Control and Protection CA E December
Rotary Disconnects.2 R5 Series Non-Fusible 16 80A Product Description R5 Series (UL 508 listed) products are manually operated modular switches. Load break switching and isolation provide safety solutions
Low Voltage Products. Breakers and Switches for the HVAC segment
ow Voltage Products Breakers and witches for the VAC segment ABB s extensive range of products for the VAC segment ABB s very extensive range of appliances and systems for low voltage power distribution
Non-Fused Load Break Switches FSSC, SX, SXDC, SC
Non-Fused Load Break Switches FSSC, SX, SXDC, SC UL 98 Non-Fused Load Break Switches Mersen disconnect switches are extremely durable, manually operated, non-fused disconnect switches. These heavy-duty
SWITCH SHOULD BE ON THE UPPER SIDE!
COMPACT AND WATERTIGHT DECONTACTOR 20 A / 32 A / 63 A AUTOMATIC WATER- AND DUST-TIGHT SEALING AC-22 AND AC-23 BREAKING CAPACITY IMPACT-RESISTANT GRP CASING With sizes from 20 to 63 A, DSN decontactors
Position switches FD series
Position switches FD series Selection diagram 01 08 11 18 19 02 04 05 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fibber glass rod gasket sphere sphere 51 52 5 56 41 42 adjustable lever
RAPIER DSB Disconnectors
RAPIER DSB Disconnectors and Copper and Aluminium Substation Connectors ENGINEERING BRILLIANT SOLUTIONS Rapier DSB disconnector The Rapier Double Side Break 'DSB' range provides a powerful and cost effective
Actuators for Fire Protection Dampers
4 620 OpenAir TM Actuators for Fire Protection Dampers GNA126.1E/T. GNA326.1E/T. Rotary version, 2-position control, with spring return and ready connected temperature monitoring unit, / DC 24 48 V / AC
GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector
GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector Catalog 0500CT9702R409 2009 Class 525/580 CONTENTS Description............................................. Page General Characteristics...................................
125 to 4000 A. Functions. Conformity to standards. Approvals and certifications (1) General characteristics. Available on request
125 to 4000 A sirco_353_a_1_cat sirco_296_a_1_cat sirco_300_b switches are manually operated or motorised multipolar load break switches. They break on and off under load and provide safety isolation for
Approvals UL 508; CSA-C22.2 No ; CSA-C22.2 No. 94; IEC/EN ; CE marking
MainswitchSurfacemounting Partno. P1-25/I2/SVB-SW Articleno. 207294 IP65 Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual override switches
General information about motor protection
Application guide General information about motor protection Typical construction of a motor starter Disconnect Switch UL 98 - UL489 CSA C22.2 # 4 CSA C22.2 # 5 Fuses SIRCO Non-Fusible Disconnect Switch
Safety enclosures. 482 General Catalogue SOCOMEC. Safety enclosures
coff_163_a_1_cat coff_156_b_1_cat Function equipped with SOCOMEC switches provide emergency breaking, breaking for mechanical maintenance and safety isolation in the vicinity of any low voltage final circuit.
Microswitches MK Series
General purpose microswitches for heavier duty applications High precision snap action mechanism 16A 250V AC resistive rating (I th ) Wide range of actuator styles Screw terminals with self lifting plate
Data Sheet Manual Motor Starters Ex9SN Series
Data Sheet Manual Motor Starters Ex9SN Series www.noarkusa.com NOARK Ex9SN Series Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors
DECONTACTOR FOR INDUSTRY 30 A / 50 A / 90 A / 150 A / 250 A
DECONTACTOR FOR INDUSTRY 30 A / 50 A / 90 A / 150 A / 250 A SAFE AND SIMPLE CONNECTION, EVEN AT 250 A SAFETY SHUTTER GRP OR METAL CASING The DS family of decontactors offer ratings from 30 to 250 A (ratings
Midwest Electric Products. Safety Switches Rugged, reliable and easy to install
Midwest Electric Products Safety Switches Rugged, reliable and easy to install Midwest Safety Switches Features Midwest Electric Products offers a wide variety of general duty and heavy duty safety switches,
Position switches FC series
A Position switches FC series Selection diagram 0 08 8 9 0 0 0 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fiber glass rod gasket sphere sphere 6 adjustable lever safety adjustable lever
DECONTACTOR SWITCH WITH SOCKET-OUTLET
DECONTACTOR SWITCH WITH SOCKET-OUTLET This extensive and comprehensive product range covers all industrial applications. With sizes up to 400 A, it offers a wide range of mounting and installation options.
Control and Load Switch Specifications Bulletin Number 194E, 194L
Technical Data Control and Load Switch Specifications Bulletin Number 194E, 194L Topic Page Product Line Overview 2 194E General Specifications 3 194E Approximate Dimensions 5 194L Circuit Diagrams 13
LOAD BREAK SWITCHES AND SWITCH FUSES
easy to install LOAD BREAK SWITCHES AND SWITCH FUSES Sixty years of innovation in developing and producing high-quality switches When Mr Kauko Hyryläinen founded KATKO in 1941, one of his key targets
Safety switches with separate actuator
Safety switches with separate actuator Selection diagram VF KEYD VF KEYD1 VF KEYD VF KEYD VF KEYD5 ACTUATORS VF KEYD6 VF KEYD7 VF KEYD8 VF KEYD10 VF KEYD11 FR FX FK FW 5 6 7 11 1 14 NC NC slow action slow
3 Phase Power Systems - Designed for Canada
3 Phase Power Systems - Designed for Canada AC OUTPUT NESS-25kVA - Mobile NESS-50kVA - Mobile Units Rated AC Power Output 33 66 kw Maximum AC Power Output 33 66 kw AC Output Line Connection 4 - wire (L1-L2-L3-N)
20 A / 32 A / 63 A DECONTACTOR MOUNTING: SWITCH SHOULD BE ON THE UPPER SIDE!
& WATERTIGHT DECONTACTOR DXNCOMPACT 20 A / 32 A / 63 A II2 G D Ex de IIC WATER- AND DUST-TIGHT INTEGRATED LOAD-BREAK SWITCH ROBUST AND COMPACT DESIGN HIGH PERFORMANCE POLY CASING DXN decontactors are designed
STOREDGE TM. SolarEdge Single Phase StorEdge TM Solutions for North America SolarEdge StorEdge Solutions Benefits:
SolarEdge Single Phase StorEdge TM Solutions for North America 12-25 STOREDGE TM SolarEdge StorEdge Solutions Benefits: More Energy - DC-coupled architecture stores PV power directly to the battery without
BAC Custom Engineered Controls
BAC Custom Engineered Controls Product Detail Product Introduction......................................... K2 BAC Custom Engineered Controls Benefits....................................................
Disconnectors MF range (0,5 to 3000 Hz) (1250 to Amp)
High Frequency Disconnectors For more than 100 years, Mersen has been providing the market with safe, reliable and longer life time off-load disconnectors. These devices offer high performances and robustness
Technical Brochure. Rotary Type Installation Switches A, 500 V. Brochure OT_M 22 GB D Low Voltage Products
94 D 5384 Technical Brochure Rotary Type nstallation Switches 16...160 A, 500 V Brochure T_M 22 GB 99-08 Low Voltage Products 9809CD03 Rotary Type nstallation Switches 16 A...160 A ew features for installation
Rotary Disconnect Switches, Bulletin 194R
ROCKWELL AUTOMATION PROCUREMENT SPECIFICATION PROCUREMENT SPECIFICATION Rotary Disconnect Switches Bulletin 194R NOTICE: The specification guidelines in this document are intended to aid in the specification
SIRCO PV Load break switches for photovoltaic applications for use up to 1500 VDC from 100 to 3200 A
Load break switches new SRCO-pv_023_a_1_cat The solution for > Residential buildings. > Buildings. > Solar parks. Strong points Function SRCO PV are manually operated multipolar load break switches. They
Safety enclosures Normal atmospheres steel enclosure from 50 to 1600 A
Integrated products & solutions The solution for > Iron and steel industry > Cement plants > Paper mills > Sawmills > Hydraulic power packs > Automotive > Mining coff_436_a coff_434_a Strong points Function