Automations for sliding doors COMPLIES WITH EN16005

Transcription

1 AUTOMATIC DOORS 1

2 Index A140 AIR pag. 3 Item Of Specifications A140 AIR pag. 10 A100 Compact pag. 12 Item Of Specifications A100 Compact pag. 18 Serie 940 pag. 20 Item Of Specifications 940 SM - SM Telescopica pag N pag. 28 Item Of Specifications 950N pag. 33 GBF 1500/1600 pag. 35 AIRSLIDE pag. 37 SF140 pag. 39 APN1 - APN2 pag. 41 TK20 pag. 45 TK50 pag. 48 Revolving Doors pag. 52 Accessories pag. 59 Note pag. 68 2

3 A140 air Automations for sliding doors COMPLIES WITH EN

4 A140 air The right solution for all your needs Solutions with cover h 100 mm ± min ±10 55 ± ± MAX With commercial profiles 7 With FAAC glass clamp system With reduced section profiles FAAC TK20 Solutions with cover h 140 mm ,5 28 ± ± ±10 77, ± , min MAX With commercial profiles With FAAC glass clamp system With reduced section profiles FAAC TK20 7 Solutions with special versions h 100 mm and h 140 mm With spacers ± With profiles for APN anti-panic break-out systems 63 ± ± ±10 With self supporting profile and spacers , ,1 166,37 With self supporting profile, transform-light and reduced section profiles FAAC TK20 59 ±7.5 HS 78 MAX MAX 74, MAX Telescopic version mounting on masonry Telescopic version mounting cross 4

5 The future is here MADE IN ITALY A140 AIR The first automated system for sliding doors designed to meet the needs of the market as well as protect our environment. A140 Air is the first automated system that respects our planet. Thanks to its innovative Energy Saving device it identifies the direction of transit and perfectly optimizes opening/ closing times to avoid unnecessary air dispersion, even in case of sideways transit. This device allows energy saving and optimizes temperature sudden changes in the room and near to the doors. All in absolute safety. A140 Air features an ETHERNET interface for setting the operating parameters of the automated system and viewing the fault diagnostics with a PC connected to the network. The A140 Air automated system is customizable and modular to meet the architectural and technical needs of the customer. Thanks to the two different covers, the exclusive leaf fitting systems and the different leaf profiles that can be used, it is possible to create the best technical and architectural solution. Designed to operate at best in any condition and in any environment, it is the optimum solution for those technicians who wish to save assembly time, by rationalizing the inventories for the final customer who will have full access to a product that is personalized, ecological, reliable, safe, technologically advanced and above all that will pay for itself over time. Technical specifications A140 AIR Electric power supply 115/230 Vac - 50 /60 Hz Power consumption 100 W Frequency of use 100% Drive unit 24 Vdc with encoder Carter height 100/140 mm Head profile length VP x mm/ VP x 1, mm* Opening speed (adjustable) 5 to 80 cm/sec. / 10 to 160 cm/sec. Closing speed (adjustable) 5 to 70 cm/sec. / 10 to 140 cm/sec. Partial opening adjustment 10% to 90% of total opening Pause Time adjustment 0 to 30 sec. Night pause Time adjustment 0 to 240 sec. Anti-crushing device standard Photocells fail safe standard (can be excluded) Protection class IP 23 (for indoor use only) Environmental temperature -20 C to + 55 C *For telescopic model 5

6 A140 air Motor with electrolock Control unit with switching Automatic adjustments Identification of open and close positions. Measurement of leaf weight and friction. Speed selection, optimal acceleration and deceleration. Photocell test. Anti-crushing safety device at 150 N. Accessories Button photocell. Passive infrared sensor. Microwave radar. Push-buttons, key-operated push-buttons with emergency release device. Clamping profiles for glass leaves. Electromechanical motor lock with manual release. Motor lock monitoring Emergency batteries. Guarantee a 30-minute range of continuous use. 5 Sliding carriages Anti-panic break-out system. SISTEMA ANTIPANICO A SFONDAMENTO Not available for telescopic version. Compatible with the new series of FAAC TK20 and TK50 profiles Wireless selector switch. Carriages with plastic wheels on special aluminium alloy sliding track on vibrationdamping seal. Brush for cleaning the sliding track. 6

7 power supply Prepared for NET-COM tab Telescopic version Slots for rapid mechanical assembly 7 Knob for manual release Wireless selector switch Use Model Leaf Passage width (mm) Leaf max weight (kg) Self supporting head profile length in mm A140 AIR 1 single Kg NO A140 AIR 2 double Kg NO A140 AIR 1 A single Kg YES (max 2500 mm) A140 AIR 2 A double Kg YES (max 2500 mm) A140 AIR T2 single telescopic Kg NO A140 AIR T4 double telescopic Kg NO 7

8 A140 air PROGRAMMING DISPLAY Main functions Access password insertion Closing speed adjustment Pause time adjustment Diagnostic display Opening speed adjustment Anti-break-infunction management Anti-crush adjustment Weekly calendar management Interlock management with or w/o memory Selection of battery operating logics 1 output configuration on control unit 2 emergency inputs configuration on control unit Cycle counter visualization Daily time bands (5) management Programming display SD KEEPER FUNCTIONS KEYBOARD Main functions Manual Automatic One-way Reset Open Partial opening Night One-way partial Trouble shooting through a combination of flashing leds Operation inhibition by jumper or push buttons combination Preset for programming Display connection SD Keeper function keyboard SDK LIGHT FUNCTION KEYBOARD Main functions Manual Automatic One-way Reset Open Partial opening Night One-way partial Trouble shooting through a combination of flashing leds Operation inhibition by push buttons combination Not designed for programming Display Sdk light function keyboard SDKW WIRELESS FUNCTIONS KEYBOARD Main functions Manual Automatic One way Open Partial opening Night Can manage up to 2 automated systems groups 8 SDKW wireless functions selector switch

9 THERMOTOOL - Energy saving quantification The Energy Saving device of A140 Air perfectly optimizes door opening/closing times, to avoid unnecessary dispersion of air. This is done to limit the consumption of energy of the air-conditioning and heating systems with huge benefits in terms of economic savings and reduction of polluting emissions (CO2 ). To prove the efficiency of the Energy Saving device, a dedicated software tool called THERMOTOOL has been designed, in cooperation with BEA and the University of Liège (Belgium). THERMOTOOL allows to quantify energy savings in terms of both economic savings and reduction of CO2 polluting emissions, based on the dimensional characteristics and the geographical position of the automated entrance. THERMOTOOL is an effective, user-friendly tool and can be consulted at the web site in the section dedicated to the A140 Air automated system. Total energy cost /year Total yearly CO 2 emission Monodirectional / year Monodirectional CO 2 / year Bidirectional / year Bidirectional CO 2 / year Yearly savings (Estimation) Carbon decrease kg CO 2 (Estimation) Return on investment: days A140 AIR quality compliance Tested for 2,000,000 cycles (opening and closing) in compliance with the DIN standard. Compliant with the safety standards of the Low Voltage Directive (2006/95/EC), Electromagnetic Compatibility Directive (2004/108/EC) and the Machinery Directive (2006/42/EC), CE mark. 9

10 ITEM OF SPECIFICATIONS A140 AIR Electro-mechanical automated system for sliding doors, available with single and double leaf with free passage width up to 3000 mm. Max. weight up to 200 kg for single leaf version and kg for double leaf version. Height of the protective housing can be selected: 100 mm or 140 mm, with depth of 166 mm. COMPLIES WITH EN

11 A140 AIR SPECIFICATIONS Electro-mechanical automated system for sliding doors, available with single and double leaf with free passage width up to 3000 mm. Max. weight up to 200 kg for single leaf version and kg for double leaf version. Height of the protective housing can be selected: 100 mm or 140 mm, with depth of 166 mm The extruded aluminium supporting profile of the automated system features a carriage sliding guide made with a rail in special aluminium alloy with anodization treatment, fitted on the supporting profile with a vibration-proof gasket. Front housing in anodized or natural aluminium, complete with fall-prevention safety cables, marked holes to adapt leaves of different thickness (up to 75 mm) and designed to lock in open position to perform maintenance operations. 24 V electric motor with special gearbox specifically designed for low noise performance and limited dimensions (zeroffset) Encoder 100 pulses/revolutions Energy Saving device: reduces the opening and closing times of the sliding doors, decreasing the heat loss between the inside and outside by recognizing the walking direction of the pedestrian, both when leaving and when passing sideways parallel to the automatic door. Connection is possible via Ethernet interface to set the operating parameters of the automated system and to check the trouble diagnostics by means of a network-connected PC. Emergency battery: it guarantees continuous operation for 30 minutes without power supply Electro-mechanical motor block with manual release E150 control unit with 32-bit microprocessor Switching 115/230 Vac power pack Transmission pulley with tensioning device with screw for the toothed belt Double-wheel carriages on bearings and counter-push roller, with profile cleaning brush Mass and sliding friction measurement Height adjustment +/- 7.5 mm Leaf fitting profiles in extruded aluminium Selection of speed and optimal acceleration and deceleration values Photocell operation test Anti-crushing safety device, 150 Newton SDKW Wireless radio-controlled function keypad with push-buttons to select the door functions SD KEEPER or SDK LIGHT function keypad with push-buttons to select the door functions and LEDs for troubleshooting Keypad functions: Automatic Manual Night Open One-way Partial opening The SD KEEPER keypad can be connected to the Programming Display Programming display, main functions: Door-operation programming for 5 daily and weekly time bands Interlock management with or without impulse memory Trouble shooting diagnostics Cycle counter menu Motion parameters menu protected by password Logics selection with battery operation NEMKO certification for cycles (opening and closing) as per DIN norm. Conforms to the safety requirements of the Low Voltage Directive (2006/95/CE), Electromagnetic Compatibility Directive (2004/108/CE) and Machinery Directive (2006/42/CE), CE marking. 11 A140 AIR

12 A100 Compact Automations for sliding doors COMPLIES WITH EN

13 Automations for sliding doors single leaf, two leaves with continuous duty Thin and elegant Thanks to their compact dimensions, FAAC A100 COMPACT automations can be adapted to every type of architectural environment, even in limited space conditions. All the most innovative technical features in just a few centimetres. For the outmost versatility of use, the A100 COMPACT Series can be adapted to sliding doors with single leaves and a maximum weight of 110 kg or with double leaves and a maximum weight of 70 kg each leaf. An A100 COMPACT automation also guarantees considerable energy savings as regards airconditioning and the total removal of architectural barriers. 10 cm thinner than ever Reliable and always sliding Designed to operate at best on each occasion and in every environment, A100 COMPACT automations are automatically reliable, without limits on the frequency of use. In the event of a power cut, buffer batteries (optional) with charge control guarantee 100% operation for thirty minutes. Excellent logics in real time A microprocessor verifies in real time all door activities and guarantees an intelligent control. The operation logics can be selected by means of a functions keypad. Absolute safety The A100 COMPACT Series automatically programs opening and closing force and speed according to the friction and the door weight in conformity with the relevant international safety standards. In case of an obstacle the door reopens immediately. On the next closing it verifies at slow speed if the obstacle is still present. 13

14 A100 Compact Motor with electrical lock 1 Motor with electrical lock 2 Control unit with switching power supply unit 3 Drive trolleys 4 Knob for manual release 5 Parachute device of front housing 6 Eyelets for a fast mechanical installation Accessories Round photocell Infra-red passive sensor Microwave radar Keyswitches with emergency release devices Profiles for glass leaf fitting Electro-mechanical motor lock with manual release Motor lock monitoring Emergency batteries. They guarantee the automated system to operate for 30 minutes on continuous use Break-out anti-panic kit Compatible with the new series of FAAC TK20 and TK50 profiles Control unit 14

15 Technical specifications A100 Compact Drive trolleys Electric power supply 115/230 V ac - 50 (60) Hz Power consumption 100 W Frequency of use 100% Drive unit 24 V dc motor with encoder Head profile length VP x mm Load free opening adjustment 5 70 cm/s Load free closing adjustment 5 70 cm/s Partial opening adjustment 10% 90% of total opening Pause time adjustment 0 30 s Night pause time adjustment s Anti-crushing device standard Photocells fail-safe standard (can be excluded) Protection class IP 23 (for indoor use only) Environmental temperature -20 C +55 C Knob for manual release Time slot programmable calendar management Use Model Leaf Free passage width (mm) Leaf max. weight (kg) A100 COMPACT 1 single A100 COMPACT 2 double

16 Programming display Entering of access password Closing speed adjustment Pause times adjustment Diagnostic display Main functions Management of interlock with or without memory Selection of battery operation logics Configuration of 1 output on the control unit Configuration of 2 emergency inputs on the control unit Display of number of cycles carried out Management of 5 daily time slots Opening speed adjustment Anti break-in function management Anti-crushing adjustment Weekly calendar management SD KEEPER functions keyboard Main functions Manual Open Automatic Partial opening One way Night Reset One way, partial Programming display Throubleshooting through a combination of flashing LEDs Operation can be disabled by a jumper or a combination of keys Preset for programming display SDK light Manual Automatic One way Reset Available programs Open Partial opening Night SD Keeper functions keyboard Throubleshooting through a combination of flashing LEDs Operation can be disabled by a combination of keys Not preset for programming display Small section profile TK20 SDK light functions keyboard 16

17 STATEMENT OF CONFORMITY Page 1 of 1 Order No A sample of the following product has been tested and is stated by Nemko to be in conformity with the below cited requirements Applicant Manufacturer Product FAAC S.p.A. Via Benini, 1 I Zola Pedrosa (BO) FAAC S.p.A. Via Benini, 1 I Zola Pedrosa (BO) Free standing automated system for sliding pedestrian door Model/type A100 COMPACT 2 Data 230 V 50 Hz 100 W Additional information Trademark The tested equipment was found complying with the requirements Durability test cycles Customer request based on DIN : , sub-clause Results of performed tests are shown in the test report(s) Nemko SpA TRFSAF issued Statement reference Variants None This Statement of Conformity refers to the verified type(s), does not involve production surveillance and does not allow the use of the Nemko mark on the product. Doc.: C108-SOC Rev.: 0 Date: Pag.: 1/1 Date of issue Statement of Conformity Revision: 0 signature Alberto Reati Certification Department Nemko Spa Telephone: segreteria@nemko.com Via del Carroccio 4 Fax: Web: I Biassono (MI) 17

18 ITEM OF SPECIFICATIONS A100 COMPACT Electro-mechanical automation for sliding doors with height of mechanism of 100 mm and depth of 150 mm, with single and double leaf, with transit gap, with single and double leaf with pass transit gap of up to 3000 mm, and max weight of up to 110 kg for single leaf and kg for double leaf. COMPLIES WITH EN

19 ITEM OF SPECIFICATIONS A100 COMPACT Electro-mechanical automation for sliding doors with height of mechanism of 100 mm and depth of 150 mm, with single and double leaf, with transit gap, with single and double leaf with pass transit gap of up to 3000 mm, and max weight of up to 110 kg for single leaf and kg for double leaf. Support profile in extruded aluminium. Front housing in anodised or natural aluminium complete with anti-fall safety cables, pre-fractures to adapt leaves of different thickness (up to 60 mm), designed for blocking it in open position for maintenance. 24 V gearmotor with encoder at 100 impulse per rotation Emergency battery guaranteeing 30 minutes of continuous cycle operation Control unit E100 with 32 BIT microprocessor Switching power supply unit 115/220 V Transmission pulley with device for screw tensioning the toothed belt Carriages with double wheel on bearing and counter-thrust roller. Measurement of the sliding masses and frictions Height adjustment +/- 7,5 mm Leaf attachment profile in extruded aluminium Speed selection of optimal speed, acceleration and deceleration Photocell operating test Anti-crushing safety device at 150 Newton Function keyboard SD KEEPER or SDK LIGHT with pushbuttons to select the door functions, and a LED for troubleshooting Keyboard functions: Automatic Manual Night Open One way Partial opening CERTIFICATE FOR 2,000,000 OPENINGS AND CLOSURES WITHOUT MAINTENANCE The SD KEEPER keyboard is designed to receive the programming Display Programming Display main functions Programming of door operation for 5 daily and weekly time bands Interlock management with or without impulse memory View of troubleshooting View of number of cycles effected Possibility of inputting a password to access the movements parameters menu Selection of logics with battery powered operation Requisiti di qualità A100 COMPACT Certificazione NEMKO per di cicli (apertura e chiusura) secondo la norma DIN Conforme ai requisiti di sicurezza della Direttiva Bassa Tensione (2006/95/CE), Direttiva Compatibilità Elettromagnetica (2004/108/CE) e Direttiva Macchine (2006/42/CE), marcatura CE. 19 A100 A100 COMPACT

20 series 940 Automations for sliding doors 20

21 Telescopic automations for sliding doors with single or double motor for very heavy leaves and continuous duty An automated system line designed to meet all your needs 940 SM max. capacity or 140 kg each leaf 940 SMD with double motor max. capacity or 250 kg each leaf 940 SMA and SMDA with self-supporting head profile for fixing the automated system between two walls or an aisle 940 SMT Telescopic with two or four sliding leaves. Reliability Thanks to the careful choice of high technology mechanical and electronic components Faac Series 940 SM-SMD-SMT automations for sliding doors are certified for over 2,000,000 opening and closing cycles and have no limits in the frequency of use. Motor and microprocessor electronic control unit undergo a severe quality control program before delivery. Safety with no compromises Thanks to their self-learning function, the Series 940 automations automatically set the opening and closing forces according to the friction and the leaf weight in conformity with the relevant safety standards. In the event of a power cut, buffer batteries (optional) with charge control guarantee 100% operation for thirty minutes. Excellent logics The operation logics can be selected with the SD Keeper or SDK Light functions keypads, which also signal and display any faults through their diagnostics functions. The assembly and installation procedures of Series 940 have been conceived and designed to optimize the installation times thanks to the wide working area, the easy fitting of trolley/ belt, the concept of the drive module and the limit switches on the support profile. Moreover, the easy-to-assemble housing can be locked in the open position and therefore it can be easily manoeuvred by one operator. In this way, installation or maintenance costs are even lower. 21

22 serie Trolleys with steel wheels and teflon rail 1 Motor with electrical lock 2 Microprocessor control unit 3 Trolleys with steel wheels and teflon rail 4 Toroidal transformer and emergency batteries 5 Drive trolley 6 Knob for manual release 7 Eyelets for a fast mechanical installation 1 Automatic adjustments Open and closed positions identified Measurement of leaf weights and friction Selection of optimum speed, acceleration and deceleration Photocell test Anti-crushing safety at 150 N 6 Accessories Self-supporting head profile Electro-mechanical lock with internal release Miniswitch GLS photocell Infra-red passive sensor Microwave radar Wall-mounted and flush-mounted keyswitches T20/T21 with emergency release devices Profiles for glass leaf fitting Lock monitor with activation of indicator-lights or buzzers in the event of a lock malfunction Break-out anti-panic kit (only for SM-SMA version) The emergency batteries with charge control board guarantee the automated system to operate for 30 minutes on continuous use Use Model Leaf 940 SM1 single 940 SM2 double 940 SMA1 single 940 SMA2 double 940 SMD1 single 940 SMD2 double 940 SMDA1 single 940 SMDA2 double 940 SMT2 single tel. 940 SMT4 double tel. 940 SMTA2 single tel. 940 SMTA4 double tel. 22

23 Technical specifications 940 SM Electric power supply 230 V ac (+6%-10%) 50 (60) Hz Power consumption 100 W Frequency of use 100% Drive unit 24 V dc motor with encoder Head profile length VP x mm Drive by electro-driven toothed belt Opening/closing speed adjustable (two leaves) cm/s Emergency opening/closing speed adjustable Pause time adjustable from 0 to 30 s Static force 150 N (self-learning adjustment) Partial opening adjustable (two leaves) from 10% 90% of total travel Anti-crushing device standard Photocells fail-safe standard (can be excluded) Protection class IP 23 (for indoor use only) Environmental temperature -20 C +55 C 7 Free passage width (mm) Leaf max. weight (kg) Self-supporting (head profile length mm) NO NO YES (max 3.000) YES (max 3.000) NO NO YES (max 3.000) YES (max 3.000) NO NO YES (max 3.000) YES (max 3.000) Time slot programmable calendar management 23

24 serie 940 PROGRAMMING DISPLAY Main functions Entering of access password Opening speed adjustment Closing speed adjustment Anti break-in function management Pause times adjustment Anti-crushing adjustment Diagnostic display Weekly calendar management Management of interlock with or without memory Selection of battery operation logics Configuration of 3 outputs on the control unit Configuration of 2 emergency inputs on the control unit Display of number of cycles carried out Management of 5 daily time slots SD KEEPER FUNCTIONS KEYBOARD Programming display Manual Automatic One way Reset Main functions Open Partial opening Night One way, partial Throubleshooting through a combination of flashing LEDs Operation can be disabled by a jumper or a combination of keys Preset for programming display SDK LIGHT Manual Automatic One way Reset Main functions Open Partial opening Night One way, partial Throubleshooting through a combination of flashing LEDs Operation can be disabled by a combination of keys Not preset for programming display SD Keeper functions keyboard SMALL SECTION PROFILES TK 20 SKD Light functions keyboard 24

25 25

26 ITEM OF SPECIFICATIONS 940 SM - SM Telescopic Electro-mechanical automated system for single and double telescopic sliding doors with a fastening compartment of up to 3000 mm. (4000 mm. SM telescopic) 26

27 ITEM OF SPECIFICATIONS 940 SM SM Telescopic Electro-mechanical automated system for single and double telescopic sliding doors with a fastening compartment of up to 3000 mm 4000 SM telescopic Leaf carrying capacity: For 940 SM sliding operator max 140 Kg for single leaf and 110 Kg for double leaf For 940 SMT telescopic sliding operator max Kg. for double leaf and for four leaves Support profile in extruded aluminium Dimensions (height x depth): SM = 180x179 mm SMT = 205X251 mm Sliding Guide in low noise anti wear plastic Front housing in natural or anodized aluminium, hinge seat on the support profile, laid on anti-vibration rubber pads. Locked at opening by an appendix, Safety cables to avoid the housing from falling ( parachute ) Housing lower profile can be adapted to different thickness of the leaf 24 Vdc gearmotor with optical encoder 24 Vdc gearmotor 940 SDM microprocessor control unit Power supply unit, with low energy consumption toroidal transformer Transmission pulley with screw device to adjust the belt Electro-conductive transmission belt Two wheel carriages on bearing with galvanised steel structure Counter-thrust roller in nylon on bearing Height adjustment± 10 mm Side adjustments ± 15 mm Leaf fitting profile in extruded aluminium Automatic adjustment of open and closed position Measurement of leaf masses and friction Selection of optimal speed, acceleration and deceleration Photocell test Anti-crushing safety device at 150 N SD KEEPER OR SDK LIGHT keyboard with pushbuttons to select the operating programs and LEDs to display diagnostics Available programs: AUTOMATIC-MANUAL-NIGHT-OPEN-ONE WAY- PARTIAL OPENING By a combination of flashing LEDs you can trace the cause of door alarm Reset functions You can disable operation by means of a jumper and a combination of keys The SD KEEPER keyboard is designed to receive the Programming Display Programming display main functions You can input access password Adjustment of opening/closing speed from 20 to 180 cm/s Adjustment of pause times from 0 to 30 s Timer function with buffer battery (5 years range) PROGRAMMING DOOR OPERATION FOR 5 DAILY AND WEEKLY TIME BANDS Interlock management with or without impulse memory Anti-intrusion function management Logics selection on battery operation Configuration of 3 outputs on the 940 SDM control unit Configuration of 2 emergency inputs on the 940 SDM control unit Diagnostics display Display of number of cycles performed SM

28 950N Automated system for swing doors COMPLIES WITH EN

29 Automated systems for leaf doors Open and close in absolute silence The 950N automated system with integrated spring commands door opening and closing in near silent operation. Versatile and elegant The Faac 950N automated systems (with spring closing system) can be installed both on the lintel and directly on the structure of the door. They guarantee perfect compatibility and interchangeability with previous 950BM/BSM models. The housing covering the automated system can be supplied in anodized extruded aluminium or in shaped ABS in an innovative design making it possible to fit a (passive infrared) detection sensor inside it. The 950N automated systems are also able to automate double-leaf entrances by interfacing the 2 units in a master/ slave configuration and the double leaf will be moved by a single automated system. Safe and intelligent The automated system features two control boards: 950MPS (control board) and 950 I/O (input / output). A microprocessor controls all the activities of the door in real time and an encoder detects its angular position. Moreover, the operating logic (automatic, manual, night, open) can be selected by means of an integrated selector. Built in conformity with the new European safety standards, speed and force are programmed according to the size of the door. If an obstacle is detected, the door re-opens immediately and, as it closes, it verifies, at slow speed, the removal of the obstacle. Powerful and reliable Thanks to the accurate selection of the mechanical and electronic components, depending on leaf length and arm used our 950N automated system is able to move leaves weighing over 300 kg on continuous duty, while always maintaining absolute operational safety. 29

30 1 Control unit 950 I/0 2 Lamellar transformer 3 Return spring with coupling for the activation arm 4 Control unit 950MPS 5 Encoder 6 DC motor 7 Radio receiver coupling 3 4 Automatic adjustments Determination of position: open and closed Measurement of the weight and friction of the leaves. Selection of optimal speed, acceleration and deceleration Photocell test 7 Selectable ANTI-WIND function (ensures the resistance of the door during closure even with strong wind). New articulated arm with telescopic adjustment in anodized aluminium New arm with sliding block in anodized aluminium 30

31 Technical specifications 950N 5 Power supply Absorbed power Use frequency Drive unit Activation Anti-crushing device Dimensions Weight 230 Vac (+6% -10%) 50 (60) Hz 100 W continuous 24 Vdc motor with encoder electromechanical with/without return spring standard supply 530 x 100 x 104 mm (LxHxD) 10 kg Protection class IP 23 Opening angle Opening speed adjustable from 30% to 100% Closing speed adjustable from 30% to 100% Pause time Standard operating functions Activation arms in stainless steel Covering housing adjustable from 1 to 30 sec. automatic-manual-open Articulated to push With short sliding block With standard sliding block in abs or aluminium Thanks to the calendar management, it can be programmed in time bands. (available with KP Controller keypad and display) Use Model Leaf length (mm) Leaf max. weight (kg) Articulated arm to push Leaf max. weight (kg) Arm with short sliding block Leaf max. weight (kg) Arm with standard sliding block 950N

32 STANDARD FUNCTIONS Operating logics: AUTOMATIC - OPEN - MANUAL/NIGHT Self-learning of open and closed positions and measurement of the door weight Anti-crushing safety device active during opening and closing PUSH and GO function, can be selected (commands opening by a simple push on the door) ANTI-WIND function, can be selected (guarantees the resistance of the door during closure even with strong wind) Closing thrust to guarantee door closure even with strong wind AVS (Anti Vandal System) function: this device protects the motor if leaf movement is forced Manual operation in case of an electrical power cut Adjustment trimmer for: opening speed, closing speed, pause time Facility for: microwave radar, passive and active infrared sensor, command pushbuttons, photocells, electric locks, bolt, KP Controller programming unit, FAAC radio controls. If you use the KP Controller or SDK Light function keypad, you obtain the following functions: Operating logics: AUTOMATIC - MANUAL - OPEN ONE WAY - NIGHT PARTIAL OPENING - DIAGNOSIS WITH A WIDE RANGE OF SIGNALS If you use the KP Controller keypad, coupled to the programming display, you obtain the following functions: Adjustment of opening and closing speed Pause time adjustment Opening width adjustment Interlock function Master-Slave function for double-leaf door Facility for acoustic or light transit signallers Self-diagnosis. Programming display KP Controller function keypad SDK Light function keypad In compliance with UL325 and CSA Standards CAN/CSA Function selector Arm with sliding block Articulated arm to push Housing in anodized aluminium 32

33 ITEM OF SPECIFICATIONS 950N Electro-mechanical automated system with return spring for leaf doors and DC power motor. COMPLIES WITH EN

34 950N ITEM OF SPECIFICATIONS 950N FAAC electro-mechanical automated system with return spring for leaf doors and DC power motor Microprocessor control unit integrated with self diagnosis and continuous verification on all door functions Installation on both architrave and leaf, opening outward and inward Drive arms in anodized aluminium to push, and pull with sliding block Housing in ABS painted grey or in anodized extruded aluminium Anti-crushing safety device active both at closing and opening. The system not only immediately reverses of the door in case of an obstacle but memorises the point where impact occurred and approaches it at reduced speed. It returns to the standard maneuver conditions only after verifying its removal. Closing stroke to guarantee closing of the door also in the event of a strong wind. The door opening angle is adjustable AVS System (Anti Vandal System) a device which protects the motor if leaf movement is forced. Functions selector integrated in the operator with logics: OPEN - AUTOMATIC - MANUAL/NIGHT Adjustable opening and closing speed Adjustable pause time Push and Go selectable function (it controls the opening by simply pushing the door) KP controller and SDK-LIGHT programmers with logics: AUTOMATIC - MANUAL - OPEN - ONE WAY - NIGHT - PARTIAL OPENING The KP Controller keyboard is designed to receive the programming Display Programming display - Main functions Programming of door operation for 5 daily and weekly time bands Interlock control with or without impulse memory Master-Slave for double leaf doors Display of number of cycles effected Display of fault diagnostics You can input a password to access the movement parameters menu. Maximum door length: 1,400 mm Door maximum weight: 367 kg (700 mm) Power supply voltage: 230 V~ - 50 /60 Hz Absorbed power: 100W UL325 and CSA Standard CAN/CSA Compliant 34

35 Modello GBF1500 Crystal GBF1500/1600 Elegant, functional, space-saving Automatic balanced door with integrated anti-panic system Suitable for environments that do not allow the installation of the traditional horizontal sliding doors Available in two versions: framed leaf or glass leaf Patented product COMPLIES WITH EN

36 GBF1500/1600 GBF1600 GBF1500 GBF1500 Crystal GBF1600 differs from the GBF1500 in terms of the absence of floor carriages, replaced by anodised aluminium rails to fix to the floor. An elegant solution which facilitates compliance with legislation on safety exits. Fig. 1 The automatic door GBF1500 is characterised by its particular opening movement with simultaneous rotation and retraction of the door leaves (balanced); this feature makes it particularly suitable in environments that do not allow the installation of the traditional horizontally sliding doors and that must still comply with the regulations on anti-panic safety exits. The opening of the doors in antipanic mode in case of emergency, is performed with simple manual pressure (Fig.1): the hinged doors open wide laterally and immediately (Fig.2), freeing up the passageway as much as possible and then, after an adjustable period of time, close again automatically and the normal operation of the door is restored (Fig.3). The use of electronics of the highest level, the absence of sharp edges and the characteristics of the GBF1500 system ensure efficiency and reliability. Fig. 2 Technical characteristics The system consists of strong extruded aluminium; the moving parts run on ball bearings and the leaves are made of 10mm thick tempered glass. The anti-panic model GBF1500 consists of magnetic devices that allow you to keep the leaves in the normal position, guaranteeing an adjustable release force not exceeding 220 N (replacing the conventional mechanical devices that can jam.) The system is equipped with carriages that are preinstalled inside an aluminium box with an optional dust cover. Fig. 3 Width VP MIN-MAX Height VP MIN-MAX Width MIN-MAX 1500 mm mm 1873 mm mm mm mm 36

37 AIRSLIDE Comfort and design have no barriers. Automatic door with INTEGRATED AIR BARRIER Suitable for public places: shops, supermarkets, offices, banks, hospitals, nursing homes and retirement homes, warehouses and places with controlled temperature such as waiting rooms, airports and railway stations Patented product COMPLIES WITH EN

38 AIRSLIDE A new concept in automatic doors with integrated air barrier. The new AirSlide system features the exclusive self-supporting crossbar with integrated automation and air barrier. FAAC has combined an automatic opening and the air barrier system into a single unit with obvious aesthetic and functional advantages. Curves and sleek lines make this system easy to integrate into any architectural environment. Compared to the traditional air barrier applied separately (see Fig. 1), the new AirSlide solution has the following advantages: automatic door with integrated air barrier, contained dimensions, the system is integrated with a height of only 25 cm, one supplier for the installation and maintenance of the system, maximum installation flexibility enabling installations where a separate air barrier cannot be applied, air barrier to protect the entrance-way without dispersion: protection from the cold in winter and the heat in summer, efficient protection because it limits the entry of wind, dust and dirt, just before opening the doors. Fig. 1 - The traditional and cumbersome air barrier mounted separately to the door 38

39 SF140 Elegant, functional, space-saving Automatic folding door with integrated anti-panic system Suitable for environments that do not allow the installation of the traditional horizontal sliding doors and in places where an escape route is needed COMPLIES WITH EN

40 SF140 An elegant space-saving solution that allows you to comply with the regulations regarding escape routes. Fig. 1 Automatic folding door SF140 with breakout anti-panic system, particularly suitable in environments with limited space where it is not possible to install a normal sliding door and where an escape route is needed. Built with specially made extruded aluminium, with a sleek and slim design, distinguished by the absence of external hinges and rounded edges. Door movement system is obtained through linear tracking which gives it stability and fluidity by using ball bearings which guarantee lightness and durability. The use of electronics of the highest quality and the characteristics of the SF140 system ensure efficiency and reliability. Fig. 2 TECHNICAL SPECIFICATIONS The SF140 system is characterised by a removable aluminium alloy supporting structure for easy transport and on-site assembly. The doors are made of a aluminium alloy with a 35mm cross section and a width of only 25mm which allow ample brightness. The edges are rounded (in compliance with laws regarding accident prevention) and the perimeter closure is guaranteed by the use of suitable brushes. The use of glass chamber, in addition to creating a thermo-acoustic barrier, gives the door greater rigidity and comfort. The certified anti-panic opening system is assured by the use of double glazing adjustable magnetic hooks which determine and guarantee ease of opening over time even in case of mechanical degradation. It is possible to request the door with a maximum useful passageway of up to 1800 mm. Compliance with EN16005 in terms of escape route and mechanical breakout. Fig. 3 40

41 APN1 - APN2 Anti-panic break-out system 41

42 APN1 - APN2 The apn system is an essential accessory for the realisation of automated entrances fitted on safety exit passage ways. The apn system is a combination of components purposely designed to facilitate assembly on the aluminium or iron profiles that have to be used when realising automated sliding and semi-fixed leaves that open by breakout if pushed towards the escape route. Four different types of kits can be supplied: Apn 1 - for one sliding leaf Apn 2 - for two sliding leaves Apn for one sliding leaf and a semi-fixed leaf Apn for two sliding leaves and two semi-fixed leaves Every kit is supplied complete with the safety accessories provided by the current rules, such as photocells and/or magnetic microswitches that are necessary to stop the operation of the automated system in the event of a breakout through the leaves. NEMKO certified system APN 2+2 Application limits Max leaf length (mm) Max leaf weight excluding anti-panic system (Kg) H max 2500mm Description of components 6 3 x Ref. Description 1 Anti-panic hinge 2 Top profile 3 Closing plugs 4 Mobile leaf anti-panic release unit 5 Leaf adjustment block 6 Anti-panic hinge bush 7 Hook-on block 8 Slide support 9 Slide 10 Sliding guide x

43 Worldwide Market Access STATEMENT OF CONFORMITY TO STANDARDS No SOCSTD ATTESTATO DI CONFORMITA ALLE NORME N 89668SOCSTD Equipment Apparato Applicant Richiedente Manufacturer Costruttore Model/type Modello / Tipo Ratings Dati tecnici Additional information Informazioni aggiuntive Variants Varianti The tested equipment was found complying the requirements of the standard(s) L apparato provato è risultato conforme alla(e) norma(e) Results of performed tests are shown in the test report(s) I risultati delle prove eseguite sono riportati nel(i) rapporto(i) di prova Anti-panic break-out system for powered pedestrian door leaf and side screen model 930SNF 930SNFA 940SM 940SMA A100-Compact - A140 AIR Sistema antipanico a sfondamento per ante mobili e semifisse per porte pedonali automatiche modello 930SNF 930SNFA 940SM 940SMA A100-Compact A140 AIR FAAC SpA Via Benini, ZOLA PREDOSA ITALY FAAC SpA Via Benini, ZOLA PREDOSA ITALY APN APN1 1 leaf APN2 2 leaves APN1+1 1 leaf and 1 side screen APN2+2 2 leaves and 2 side screens DIN :2005 Sub-clause Powered doors with break-out (Additional requirements for doors in escape routes and emergency exits) DM n 64 Allegato III Misure relative alle vie di uscita in caso di incendio Punto 3.11 Porte scorrevoli e porte girevoli Nemko Spa 89668TRFSAF issued Doc.:C105 Rev.: 7 Date: Pag.: 1/1 This Statement of Conformity to Standards refers to the tested sample(s), does not involve production surveillance and does not allow the use of the Nemko mark on the product. Questo Attestato di Conformità alle Norme si riferisce al campione(i) provato(i), non include la sorveglianza della produzione e non permette l apposizione del marchio Nemko sul prodotto. Date of issue: Data di emissione This document is composed by 1 page Questo documento è composto da 1 pagina Nemko S.p.A. Certification Dpt.. Alberto Reati Nemko Spa Via del Carroccio 4 I Biassono (MI) T r.a. F

44 44

45 TK20 Profile line for automatic entrances with reduced section of 20 mm 45

46 TK20 TK20 PROFILES Profile line for automatic entrances with reduced section of 20 mm. Slender, light, easy to use while respecting legal standards are the features of these new profiles made to add a refined and innovative design to the advantages of an automatic sliding entrance. DISEGNI /DRAWINGS nr A-02B _930/940/A100COMPACT Nr AnteMobili / Nr. Sliding Doors 1 Nr AnteFisse / Nr. Fixed Doors 0 Soluzione(vedi disegni) /Solution (seedrawings) Tipo Motorizzazione/Motorization type Disegni Draw ing ing Nr Pezzi / Nr. Pieces 1 A 930N SF LVM LuceVanoMuro(mm.) /Wall Width 1000 Peso anta (kg.) -Door weight - 46 COMPILARE GLI SPAZI COLORATI DI GIALLO - PLEASE FILL THE YELLOW COLOURED FIELDS - N.B.: con pesi superioria120 kg. (930N SF) per antasingola, si consiglia di utilizzare la motorizzazione tipo 940 SM. Limite utilizzo A100COMPACT: 110 kg. -PLEASE NOTE: ifsingle door weight exceeds than kgs. 120 (930N SF), wesuggest to use Thanks to their simple construction, this series of profiles and seals, can be machined by just using one cropper and other common utensils. This characteristic will make things easy for all customers looking to make automatic entrances where nothing is left to chance and, at the same time, it is appreciated for the quality of the supplied article. LVP LuceVanoPassaggio(mm.) /Free Passage Width 990 HVM Altezza Vano Muro (mm.) /Wall Height = altezza sotto carter traversa / height below motorization 2200 HVP Altezza Vano Passaggio(mm.) /Free Passage Height 2198 Spessore vetro(mm.) /Glass thickness 8 Distinta di taglio profili / Cutting profiles list Descrizione /Description Profilo verticale portafotocellule per fissaggio a muro / Fixing wall vertical profile with photoelectric cell Codice / Code Quantità / Quantity Misura / Measure (mm.) Taglio / Cutting angles Orientamento / Assembly direction verticale vertical Disegno / Drawing The FAAC cutting configuration file, coupled to the technical drawings, will enable the installer to make, in simple small steps, a cutting list of all the profiles and seals making up the entrance. The configurator also supplies the dimensions of the glass panels. The assembly manual will enable the correct installation procedure. Profilo verticale battuta anta singola / Vertical profile for single door locking Telaio di fissaggio a muro anta fissa / Fixing wall frame for fixed door Profilo verticale per anta mobile asolato eforato / Vertical profile for sliding door Profilo verticale per anta fissa asolato e forato / Vertical profile for fixed door Traverso superiore / Upper door profile orizzontale horizontal verticale vertical verticale vertical orizzontale horizontal ITEM OF SPECIFICATIONS TK20 Traverso inferiore / Lower door profile orizzontale horizontal Aluminium alloy profiles with reduced section, series FAAC TK20, with thickness of 20 mm, width of 25mm, complete with gaskets to house glass panels of a thickness of 8 mm or 10 mm with PVB foil Rubber gaskets are interlock-fitted in the centre of the sliding leaves and on the sides a special gasket is used acting on the fixed leaf vertical side on stroke. Both gaskets improve the thermal insulation of the entrance. The central uprights of the fixed leaf are 30 mm wide and have a double groove to house the photocell. The groove and the visible wires of the photocells will be closed by a quick-release rigid gasket. The lower base is 80 mm high and an internal seat houses a special plastic profile with the following functions: brush support between leaf and floor for the thermal insulation sliding guide of the sliding block made of stainless steel. Distinta accessori /Accessories list Descrizione /Description Guarnizione per vetro da 8mm. (4+4) -8(4+4) mm. thickness glass gasket - Guarnizione di tenuta laterale / Side holding gasket Guarnizione di tenuta centrale anta mobile / Sliding door central holding gasket Guarnizione di tenuta centrale / Central holding gasket Profilo plastico di guida inferiore anta mobile / Lower sliding plastic profile for sliding door Profilo plastico per chiusura profilo portafotocellula / Plugging plastic profile for profile with photoelectric cell Kit accessori anta mobile / Accessories kit for sliding door Piastrine per fissaggio carrelli per anta mobile / Small plate for sliding door trucking wheels fixing Spazzolino / Brush Distinta di taglio vetri /Cutting glasses list Codice / Code Quantità / Quantity Misura / Measure (mm.) Taglio / Cutting angles Quantità / Quantity Larghezza / Altezza / Width (mm.) Height (mm.) Orientamento / Assembly direction sui 4lati on the 4sides verticale vertical verticale vertical verticale vertical orizzontale horizontal verticale vertical orizzontale horizontal Tipo /Type Disegno / Drawing Vetro da8mm. (4+4) -8(4+4) mm. glass - 46

47 Detail of the striker nodes of mobile and fixed leaves for heat resistance Compartment with edge Corridor compartment A100 vertical section with tk20 profiles Floor brush Detail of the different striking systems of sliding leaves if installed in a corridor compartment or in a compartment with edge 47

48 TK50 Automatic entrances with increased section profile of 50 mm. 48

49 TK50 PROFILES Automatic entrances with increased section profile of 50 mm. The sturdiness of these profiles and their innovative design, are the features for those looking for an automatic entrance for installation in places with a high volume of traffic where trolleys and suitcases may be present. The TK50 profiles are designed to be perfectly integrated with a break-out anti-panic system for applications requiring an emergency exit. SLIDE DOOR Thermal insulating and burglar-resistant labyrinth profiles Accident-Prevention Rounded Sliding Profiles Complete With Heat-Resistance Central Striker Seals SWING DOOR Accident-prevention rounded profile for break-out sliding semi-fixed leaves and swing-leaves Heat-resistance brush between leaf and floor Striker seal studied to facilitate the break-out ability of the sliding leaf 49

50 TK50 ITEM OF SPECIFICATIONS TK50 Aluminium alloy profiles, series FAAC TK50, with thickness section of 50 mm., for automatic entrances with sliding and leaf doors. Complete with glass-retaining profiles and gaskets to house glass panels up to a max thickness of 32 mm. The base is 141 mm high and an internal seat houses the brushes for the thermal insulation and the sliding rails of the floor sliding block. In the application coupled with the anti-panic break-through system APN, the profiles are coplanar with the structure and without visible hinges. Rubber gaskets for the thermal insulation are fitted in the centre of the sliding leaves. A labyrinth system is used on the sides consisting of two vertical profiles and an end-stroke gasket which intersect when doors are closed. This labyrinth increases the thermal insulation of the entrance and improves the resistance to breaking in the event of entrances coupled with anti-panic break-through system. Pivoting rotation system of the leaves without cutting and crushing risk (also valid for the semi-fixed leaves of the anti-panic break-through system) in compliance with the Machine Directive. TABLE OF THE DRAWINGS OF ENTRANCES WITH TK50 PROFILES Engines Type Automated system assembly solution 1 mov. leaf without leaves break-out 930N SF 940 SM 940 SMT 950 N drawing number on wall 1 on head profile with transom 2 with leaves break-out on wall 3 on head profile with transom 4 2 mov. leaves without leaves on wall 5 break-out on head profile with transom 6 with leaves break-out on wall 7 on head profile with transom 8 2 mov. leaves without leaves on head profile fixed leaves break-out on wall 10 on head profile with transom 11 1 mov. leaf + 1 fixed leaf with leaves partial break-out with leaves total break-out without leaves break-out with leaves total break-out 1 mov. leaf without leaves break-out on head profile 12 on wall 13 on head profile with transom 14 on head profile 15 on wall 16 on head profile with transom 17 on head profile 18 on wall 19 on head profile with transom 20 on head profile 21 on wall 22 on head profile with transom 23 on wall 24 on head profile with transom 25 with leaf break-out on wall 26 on head profile with transom 27 2 mov. leaves without leaves on wall 28 break-out on head profile with transom 29 with leaves break-out on wall 30 on head profile with transom 31 2 mov. leaves + 2 fixed leaves 1 mov. leaf + 1 fixed leaf without leaves break-out with leaves partial break-out with leaves total break-out without leaves break-out with leaves total break-out on head profile 32 on wall 33 on head profile with transom 34 on head profile 35 on wall 36 on head profile with transom 37 on head profile 38 on wall 39 on head profile with transom 40 on head profile 41 on wall 42 on head profile with transom 43 on head profile 44 on wall 45 on head profile with transom 46 2 mov. leaves telescopic on wall 47 on head profile with transom 48 2 mov. leaves + 1 on head profile 49 fixed leaf telescopic on wall 50 on head profile with transom 51 4 mov. leaves telescopic on wall 52 on head profile with transom 53 4 mov. leaves + 2 fixed leaves telescopic on head profile 54 on wall 55 on head profile with transom 56 1 swing leaf sliding arm on head profile 80 on wall 81 on head profile with transom 82 1 swing leaf articulated arm on head profile 83 on wall 84 on head profile with transom 85 2 swing leaves sliding arm on head profile 86 on wall 87 on head profile with transom 88 2 swing leaves articulated arm on head profile 89 on wall 90 on head profile with transom 91 Engines Type Mounting solution automatism 1 mov. leaf senza sfondamento ante A100 COMPACT A140 AIR A140 AIR TELESCOPIC drawing number su muratura 47 on head profile with transom 48 with leaf break-out on wall 49 on head profile with transom 50 2 mov. leaves without leaves on wall 51 break-out on head profile with transom 52 with leaves break-out on wall 53 on head profile with transom 54 2 mov. leaves without leaves on head profile fixed leaves break-out on wall 56 on head profile with transom 57 1 mov. leaf + 1 fixed leaf with leaves partial break-out with leaves total break-out without leaves break-out with leaves partial break-out with leaves total break-out 1 mov. leaf with leaves total break-out on head profile 58 on wall 59 on head profile with transom 60 on head profile 61 on wall 62 on head profile with transom 63 on head profile 64 on wall 65 on head profile with transom 66 on head profile 118 on wall 119 on head profile with transom 120 on head profile 67 on wall 68 on head profile with transom 69 on head profile 92 on wall 93 with leaf break-out on head profile with transom 94 A140 AIR 95 2 mov. leaves without leaves on head profile with transom 96 break-out with leaf break-out 97 with leaves break-out on head profile with transom 98 2 ante mobili 99 2 mov. leaves + 2 fixed leaves 1 mov. leaf + 1 fixed leaf without leaves break-out with leaves partial break-out with leaves total break-out without leaves break-out with leaves partial break-out with leaves total break-out 2 mov. leaves without leaves break-out 2 mov. leaves + 1 fixed leaf without leaves break-out 4 mov. leaves without leaves break-out 4 mov. leaves + 2 fixed leaves without leaves break-out on head profile with transom 100 with leaves break-out 101 on head profile with transom 102 without leaves break-out 103 on wall 104 on head profile with transom 105 on head profile 106 on wall 107 on head profile with transom 108 on head profile 109 on wall 110 on head profile with transom 111 on head profile 112 on wall 113 on head profile with transom 114 on head profile 115 on wall 116 on head profile with transom 117 on wall 70 on head profile with transom 71 on wall 72 on head profile 73 on head profile with transom 74 on wall 75 on head profile with transom 76 on wall 78 on head profile 77 on head profile with transom 79 50

51 Worldwide Market Access STATEMENT OF CONFORMITY TO STANDARDS No SOCSTD ATTESTATO DI CONFORMITA ALLE NORME N 89668SOCSTD Equipment Apparato Applicant Richiedente Manufacturer Costruttore Model/type Modello / Tipo Ratings Dati tecnici Additional information Informazioni aggiuntive Variants Varianti The tested equipment was found complying the requirements of the standard(s) L apparato provato è risultato conforme alla(e) norma(e) Results of performed tests are shown in the test report(s) I risultati delle prove eseguite sono riportati nel(i) rapporto(i) di prova Anti-panic break-out system for powered pedestrian door leaf and side screen model 930SNF 930SNFA 940SM 940SMA A100-Compact - A140 AIR Sistema antipanico a sfondamento per ante mobili e semifisse per porte pedonali automatiche modello 930SNF 930SNFA 940SM 940SMA A100-Compact A140 AIR FAAC SpA Via Benini, ZOLA PREDOSA ITALY FAAC SpA Via Benini, ZOLA PREDOSA ITALY APN APN1 1 leaf APN2 2 leaves APN1+1 1 leaf and 1 side screen APN2+2 2 leaves and 2 side screens DIN :2005 Sub-clause Powered doors with break-out (Additional requirements for doors in escape routes and emergency exits) DM n 64 Allegato III Misure relative alle vie di uscita in caso di incendio Punto 3.11 Porte scorrevoli e porte girevoli Nemko Spa 89668TRFSAF issued Doc.:C105 Rev.: 7 Date: Pag.: 1/1 This Statement of Conformity to Standards refers to the tested sample(s), does not involve production surveillance and does not allow the use of the Nemko mark on the product. Questo Attestato di Conformità alle Norme si riferisce al campione(i) provato(i), non include la sorveglianza della produzione e non permette l apposizione del marchio Nemko sul prodotto. Date of issue: Data di emissione This document is composed by 1 page Questo documento è composto da 1 pagina Nemko S.p.A. Certification Dpt.. Alberto Reati Nemko Spa Via del Carroccio 4 I Biassono (MI) T r.a. F

52 REVOLVING DOORS Solutions for revolving entrances 52

53 WELCOMING, COMFORTABLE, BEAUTIFUL, SAFE. Ideal for maintaining a steady temperature in rooms, respectful of energy consumption, and useful for overcoming architectural barriers. Rotating and semi-circular doors open as soon as we approach, and have a lot of advantages. That s why we come across more and more of them every day, and manual doors suddenly seem old fashioned to us. FAAC automated systems make automatic doors move ever more smoothly all over the world, thanks to modern technologies, and the superior quality of processes and materials, guaranteed by on-going research. All this is aimed at improving the liveability of offices, shops and buildings in general. FAAC offers various types of rotating entrances to satisfy customers different requirements. You can select the number of sectors (2-3-4) and the diameter (from 1800 to 4000 mm). DESCRIPTION AND TECHNICAL SPECIFICATIONS FAAC revolving entrances stand out for their versatility and completeness. They can operate automatically or manually. Leaf profiles are available in steel, aluminium with bronze or paint finish, or completely in glass. They are safe thanks to electronic control of rotating speed and the sensitive edges installed to ensure safety of persons located between moving and fixed parts. The anti-panic break-out system of the rotating leaves optimises the opening to allow long or bulky objects to pass through. The night-closure leaves and the electro-mechanical lock solve the anti-burglary security requirements. 53

54 Revolving Doors Automatic revolving door with two sectors GS 2HC An automatic revolving door with two sectors in aluminium or steel which guarantees maximum comfort when crossing through the pedestrian gate. During heavy incoming traffic, you can block the revolving door and, with a simple operation, open the leaves which separate the two sectors, opening a transit gate free of obstacles. TWO SECTORS A dim in mm B dim in mm

55 Automatic revolving door with three or four sectors GS COLOR Automatic revolving door available in aluminium or stainless steel in the three or four sectors version. Its feature is the absence of the central vertical pole for rotating the leaves, which enables maximum visibility of the entrance s depth without any visual barrier. THREE SECTORS A dim in mm B dim in mm

56 Revolving Doors Automatic revolving door with three or four sectors GS 100 Automatic revolving door available in aluminium or stainless steel in the three or four sectors version. It is equipped standard with the break-out opening system of the revolving leaves and the central rotating pole. FOUR SECTORS A dim in mm B dim in mm

57 Automatic revolving door with three or four sectors GS KRYSTAL The most transparent automatic revolving door on the market, available in three or four sector versions. The motor is embedded under the floor. Manual revolving door with three or four sectors GS EKO Manual revolving door with three sectors in aluminium or steel complete with large vertical handles without central pole. 57

58 Semicircular Doors description and Technical specifications The semicircular doors confer on the entrances a sleek and attractive aspect thanks to profiles with reduced section used on fixed and mobile leaves. They can be designed according to the customer s aesthetic needs, making the entrance unique and characterizing the building in an original way. They can be equipped with the anti-panic breakout system to ensure the escape routes. FAAC can provide the complete entrance or only the mechanism included the curved casing cover. NEW: THE ANTI-PANIC BREAKOUT system of the sliding curved doors for the installation of entrances semicircular on an escape routes. 58

59 accessories Automatic doors 59

60 Index Dual technology radar XMA1 ON page 61 Active infrared sensor XBFA ON page 62 Compact microwave radar XM100 ONE page 63 Unidirectional microwave radar XBFRM1 page 64 Active infrared sensor XPB34-1ON-XPB70-1ON-XPB90-2ON page 65 Miniswitch GLS photocell page 66 Recessed frontal torque page 66 Plastic elbow button page 66 Aluminium elbow button page 66 XMRA Rain protection page 66 XBA1 Mounting bracket page 67 XRA1 Rain protection page 67 XMS Touch button page 67 XMS-VB Wall mounting bracket page 67 XCA Built-in ceiling support page 67 XBA Mounting bracket page 67 XRA Rain protection page 67 60

61 dual technology radar XMA1 ON "movement or presence" Opening and safety combined in a single sensor. Safety monitored according to EN COMPLIES WITH EN16005 Technical characteristics Power supply: 12 V - 24 V AC +/-10% ; 12 V - 30 V DC -5%/+10% Consumption: < 3 W Mounting height: From 1.8 m to 4 m (< 3 m according to DIN 18650) Sensitivity of monitoring entry: < 1 V : Log. L; > 10 V: Log. H (max. 30 V) Temperature range: Degree of protection: From -25 C to +55 C IP54 (to be operated only with the power supply unit compatible with SELV regulations) Estimated service life: Certification: 5 years R&TTE 1999/5/EC; EMC 2004/108/EC; MD 2006/42/EC EN ISO :2008 Performance Level «c» CAT 2; EN (provided that the control system monitors the detector at least once for each door cycle) LED LED Monitored GREEN RED Detection method: Technology: Movement Min. detection speed: 5 cm/s Microwave Doppler radar Frequency emitted: GHz Radiated power: < 20 dbm EIRP Power density emitted: < 5 mw/cm2 Presence Standard response time: <128 ms (max. 500 ms) Active infrared with background analysis Spot diameter: 0.1 m (standard) Number of spots: 24 or 12 per curtain Number of curtains: 2 Corner: From 15 to 50 in elevation (adjustable) From -4 to +4 (adjustable) Output: Relay (potential free contact) Max. contact voltage: 42 V AC/DC Max. contact current: 1 A (resistive) Max. switching capacity: 30 W (DC)/60 VA Solid State Relays (no potential, no polarity) Max. current output: 100 ma Max. switching capacity: 42 V AC/DC (AC) Hold time: From 0.5 sec. to 9 sec. (adjustable) From 0.3 sec. to 1 sec. (adjustable) Monitoring response time requested: Standard: < 15 ms (max. 25 ms) Specifications are subject to change without notice. detection areas The depth of the detection lobe as a function of the vertical angle Sensitivity = 9 The width of the infrared detection field depends on the prism type Sensitivity = 9 2 curtains of 24 spots that intersect (no empty space between spots) 2 curtains of 12 spots that intersect (no empty space between spots) 61

62 Automatic Door Accessories COMPLIES WITH EN16005 active infrared sensor "movement or presence" XBFA ON NEW MODEL The safety curtain ideal for automatic doors* Safety monitored according to EN16005 Technical characteristics Power supply: 12 V - 30 V DC -5%/+10% (to be operated only with the power supply unit compatible with SELV regulations) Consumption: < 2.2 W Mounting height: From 1.8 m to 3 m Sensitivity of monitoring entry: < 1 V : Log. L; > 10 V: Log. H (max. 30 V) Temperature range: From -25 C to +55 C Degree of protection: IP54 Noise: < 70 db Estimated service life: 20 years Certification: MD 2006/42/EC; ROHS /65/EU; EN 16005:2012; EN 12978:2009; EN IEC 62061:2005 SIL2; EN :2012 ESPE Type 2; EN ISO :2008 Pl «c» CAT.2 (provided that the control system monitors the detector at least once for each door cycle) LED RED Detection method: Technology: Corner: Output: Hold time: Monitoring response time requested: Presence Standard response time: <256 ms Active infrared with background analysis Spot diameter: 0.1 m (standard) Number of spots: 24 Number of curtains: 2 From -4 to +4 (adjustable) Solid State Relays (no potential, no polarity) Max. output: 100 ma Max. switching power: 42 V AC/DC from 0.3 sec. to 1 s (non adjustable) Standard: < 5 ms Specifications are subject to change without notice. Measured under specific conditions. detection areas W H W H Available as an accessory 2 m H W 2.20 m 2.30 m 2.50 m 2.55 m 3.00 m 2.80 m 1 m H W 2.20 m 1.20 m 2.50 m 1.40 m 3.00 m 1.60 m 62

63 COMPACT MICROWAVE RADAR XM100 ONE The compactest opening radar for automatic doors. TECHNICAL SPECIFICATIONS Technology Transmitter frequency Transmitter radiated power Transmitter power density Mounting height Tilt angles Detection area (mounting height = 2.2 m) Detection mode Minimum speed Supply voltage Power consumption Output (electronic relay) Max. current Max. voltage Temperature range Norm Conformity Degree of protection Material Color of head housing Dimensions Weight Length of cable microwave and microprocessor GHz < 20 dbm EIRP < 5 mw/cm² from 1.8 m to 3 m 0 to 90 vertical and -30 to + 30 lateral 4 m (L) x 2 m (P) motion 5 cm/s (measured in the sensor axis) 12 V a 24 V DC +30% / -10% < 2 W (VA) 250 ma 50 VDC/VAC from -20 C to +55 C IP54 R&TTE 1999/5/EC; EMC 2004/108/EC ABS & Polycarbonate black smoked, aluminum 80 mm (L) x 60 mm (A) x 55 mm (P) 140 g 2.5 m Detection areas 63

64 Automatic Door Accessories unidirectional microwave radar Xbfrm 1 The universal opening for any type of automatic door with high energy savings. Technical characteristics Technology: Transmission frequency: Power emitted: microwave Doppler radar GHz <20 dbm EIRP Power density emitted: <5 mw / cm ² Detection method: Min. Detection speed: motion 5 cm / s (measured in sensor axis) Power supply voltage: 12 V to 24 V AC ± 10%, 12 V to 24 V DC +30% / -10% Mains frequency: Maximum force absorbed: Output: Max. contact voltage: Max. contact current: Max. switching power Mounting height: Degree of protection: Temperature range: Dimensions: Angle of inclination: Material: Weight: Length of wire: Certification: From 50 to 60 Hz <2 W Relay (free of potential switching contact) 42 V AC / DC 1 A (resistive) 30 W (DC) / 60 VA (AC) from 1.8 m to 3 m IP54 from -20 C to + 55 C 120 mm (L) x 80 mm (H) x 50 mm (L) 0 to 90 vertically, -30 to +30 laterally ABS 120 g 2.5 m R & TTE 1999/5/EC, 2004/108/EC NB: unidirectionality is a feature that allows for the detection of people approaching the automatic door but not their subsequent moving away, speeding up the closing of the doors detection areas Detection lobes depending on the type of antenna and sensitivity Detection lobes depending on the lateral position of the antenna 2.2 m 2.2 m 64

65 active infrared sensor XPB34-1 ON - XPB 70-1 ON - XPB90-2 ON High-performance safety, positioned on the upper edge of the door for the perfect safety of people and property*. COMPLIES WITH EN16005 Technical characteristics Technology Detection method Number of spots 4 Reflexivity Sensing range (2 m) Maximum number of units Active infrared with background suppression Presence and movement Min. 5% at an IR wave length of 850 mm 400 mm (L) 70 mm (D) 4 (up to 6 if 24 V DC) Power supply 12 V - 24 V AC +/- 10% 12 V - 30 V DC -5%/+10% (Operation possible only with low voltage protection (SELV) in the event of power failure) Maximum current consumption V AC/70 24 V DC; V AC/ V DC (MASTER) V AC/60 24 V DC; V AC/ V DC (other units) Response time 64 ms (typ) Infinite (hinged door) Maximum stay time 1 minute (revolving door) Output Maximum voltage at contact Maximum current at contact Non power capacity Input Maximum voltage at contact Threshold of Mounting height Dimensions material Protection rating Temperature range Humidity Regulatory Compliance Weight: Length of wire: Certification: detection areas on a hinged door * Monitored conforms to the new EN16005 regulation 2 relays (potential-free) 42 V AC/DC 1 A (resistant) 30 W (DC) / 60 VA (AC) 1 optocoupler (potential free) 30 V high state: >10 V DC; low state: <1 V DC 1.1 m to 3 m (depending on the reflectivity of the ground) Card : 300 mm section : L* 43.5 mm (H) 47.5 mm (D) L*: length of the section according to ABS/Aluminium/PC (colour : black) IP53-25 C to +55 C 0-95%, non-condensing EMC 2004/108/EC; MD 2006/42/EC EN ISO :2008 Performance Level «c» / CAT 2; (provided that the control system monitors the detector at least once for each door cycle) 120 g 2.5 m R & TTE 1999/5/EC, 2004/108/EC Specifications are subject to change without notice. APPLICATIONS 2 m DETECTION AREA Hinged doors Infrared range 400 mm 70 2 m 65

66 The photocells are auxiliary devices for safety. For their proper usage, please refer to the regulation EN Miniswitch GLS photocell consists of a transmitter and a receiver accompanied by connection cables 8 m long. Recessed frontal torque for black plastic Miniswitch GLS XFA button photocell Plastic elbow button (dim. 95 x 250 mm) Aluminium elbow button (dim. 95 x 250 mm) XMRA RAIN PROTECTION for sensor XM100 ONE 66

67 XBA1 MOUNTING BRACKET for sensor XBRM1 XRA1 RAIN PROTECTION for sensor XBRM1 XMS TOUCH BUTTON XMS-VB WALL MOUNTING BRACKET for button sensor XMS XCA BUILT-IN CEILING SUPPORT for sensor XMA1 ON XBA MOUNTING BRACKET for sensor XMA1 ON XRA RAIN PROTECTION for sensor XMA1 ON 67