ENG. Exeo. Revolving pedestrian door

Transcription

1 ENG

2 , the expression of art in movement Banks, hotels, prestigious and representative offices require elegant and refined entrances, well integrated in the structural style of the building. To cater for this need, DITEC has created an absolutely extraordinary product: the revolving door. Clean and elegant lines, a harmonic design and cutting-edge technology are its distinguishing features. A solid and compact structure, featuring very refined safety systems, turns silently, accompanying guests in a courteous and graceful way. Main features is a line of doors with circular structure, with internal revolving wings, available in manual or automatic version, with identical structural part. The wings in manual version are push-operated while in the automatic version, operation is by means of a gear motor located in the top part of the structure. Available door diameters are: 1800 mm mm mm mm 2600 mm mm mm mm 3400 mm mm mm mm Standard heights are: of access opening 2200 mm, of roof 190 mm, total 2390 mm. The basic version, both manual and automatic, features: 3 or 4 wings 5+5 mm curved outer glass panels 4+4 mm wing glass panels standard RAL colour finish or in anodised aluminium. The automatic basic version, besides the features of the manual version, also has 2 anti-shearing sensors. The door consists of three fundamental structures: one fixed supporting structure, one moving structure, one upper part. The fixed supporting structure is made using aluminium profiles of the DITEC Pam 35 series, with curvature that varies according to the required diameters. The curved glazing is made of unbreakable glass (5+5 mm) with 0.75 mm PVB. The structure is fastened to the floor by means of special anchors. The moving structure consists of a central coated-steel supporting unit fastened rigidly to the floor. The 3 or 4 wings, fastened to the central support, are made of Pam 35 aluminium profile and 4+4 mm unbreakable glass with 0.38 mm PVB. They are made so that, in case of accidental breakage of a glass panel, this can be very easily replaced.

3 Technical specifications Description Special uses Travel control system Capacity Duty class Revolving door (24 V= motor) breakout wings and disabled use Encoder 1100 kg 5 very heavy EXEO Intermittent operation S3 = 100% Power supply Input Max peripheral speed Release system for manual opening Operating temperature 230 V~ / Hz 1 A 1 m/s handle -20 C / +55 C Protection rating IP 20 Product dimensions (diameter) 2390 (height) At the entrance to the external side part of the wings are brushes which, during movement, act as panels to prevent heat dispersion and dust entering between the outer and inner environments. The upper structure consists of a sturdy steel frame fastened rigidly to the top part of the fixed structure, for the purpose of boosting door strength; all this is masked by a peripheral band of coated sheet metal. In the case of the automatic version, inside the upper structure, the gear motor, electronic command and control unit and the optical sensor to check the position of the wings are housed. All the wiring connections are made using prewired systems that make fitting easier. The entire system is controlled by a sophisticated electronic control panel that controls all movement like a music conductor, providing operating conditions always distinguished by utmost safety. Functions Mains power supply Batteries (ensure operation in the event of power cuts) 230 V~ / Hz Number of motors 1 Motor power supply Accessories power supply Electrically operated lock power supply Encoder (controls speed and deceleration) Force adjustment control ODS Obstruction detection system (causes stop when an obstruction is detected) Speed adjustment Braking / Slowdown control (ensures best approach) Open control CONTROL PANEL EL03 24 V= / 8 A 24 V= / 0,5 A electronic Push opening Low-speed opening control Stop safety device

4

5

6

7 Description and location of accessories Rotating contacts Wing safety sensor (automatic version only) Button for disabled persons (automatic version only) Breakout antipanic system Courtesy light Handle for wing Anti-heeling device Electro-mechanical lock (automatic version only) complete with release system Function selector switch Start radar Rainproof covering Emergency push-button panel Night closing system Mats beige melange green melange blue melange light grey anthracite For more details, please see technical/sales manual

8 Standards The system has been manufactured by using only DITEC manufactured accessories and safety devices. All DITEC automations are affixed with the CE mark and are designed and manufactured in compliance with the Machinery Directive (98/37/EC), the Electromagnetic Compatibility Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC). DITEC S.p.A. operates a policy of continuous development and reserves the right to make changes and improvements to their products. DITEC S.p.A. Via Mons. Banfi, Caronno Pertusella (VA) - ITALY Tel Fax ditec@ditecva.com The technical data contained within this document is therefore not binding. Further information can be found in our on-line technical manuals at: DITEC BELGIUM LOKEREN Tel Fax DITEC DEUTSCHLAND OBERURSEL Tel Fax DITEC ESPAÑOLA ARENYS DE MAR Tel Fax DITEC FRANCE PALAISEAU Tel Fax DITEC SVIZZERA BALERNA Tel Fax DITEC AMERICA ORLANDO-FLORIDA-USA Tel Fax DITEC CHINA SHANGHAI Tel /2 Fax Cod. P119B - 01/07 - Automatic pedestrian door P