Quick couplers. Chapter H. Quick couplers

Transcription

1 Table of contents Chapter Rogan series 30,000 psi maximum working pressure P006 Coupler P006 Nipple (without check valve) P006 Nipple (with check valve) P010 Coupler P010 Nipple (without check valve) P010 Nipple (with check valve) C Series hydraulic couplers 29,800 psi maximum working pressure 115 Coupler Nipple Coupler Nipple Coupler Nipple dapters WB Series 125 Coupler Nipple

2 Rogan series Rogan series Scope Types and pressures versatile connecting device that permits easy and rapid joining of hose assemblies to your system. Each coupling is assembled and pressure tested to at least 5,000 psi above its maximum rated working pressure. Couplings with check-valve can withstand the full working pressure in the disconnected condition. Type Max. working pressure (psi/mpa) Test pressure (psi/mpa) Nominal thru hole diameter (inch/mm) P006 30,000 / ,000 / / 6.1 P010 20,000 / ,000 / / 10.2 NOTE: The choice of the threaded end form may limit the working pressure and the size of the thru hole in the coupling. Call polyflex for additional information. -2

3 Rogan series P006 Coupler P Type M (9/16" - 18 threads) , P Type M (3/4" - 16 threads) , P006-0-M4 1/4" igh pressure male , P006-0-M9 9/16" igh pressure male , P006-0-LM6 3/8" Medium pressure male , P006-0-NFB 1/4" NPT Female , P006-0-NFC 3/8" NPT Female , P006-0-NMB 1/4" NPT Male , P006-0-NMC 3/8" NPT Male , P006-0-NMD 1/2" NPT Male , P006-0-X13 Low angle face seal (9/16" - 18 threads) , P006-0-M4 P006-0-LM6 P006-0-M9 P P P006-0-X13 P006-0-NMB P006-0-NMC P006-0-NMD P006-0-NFB P006-0-NFC -3

4 Rogan series P006 Nipple without check valve P Type M (9/16" - 18 threads) , P Type M (3/4" - 16 threads) , P006-1-M4 1/4" igh pressure male , P006-1-LM6 3/8" Medium pressure male , P006-1-LM9 9/16" Medium pressure male , P006-1-NMB 1/4" NPT Male , P006-1-NMC 3/8" NPT Male , P006-1-NMD 1/2" NPT Male , P006-1-X13 Low angle face seal (9/16" - 18 threads) , P006-1-M4 P006-1-LM6 P006-1-LM9 P P P006-1-X13 P006-1-NMB P006-1-NMC P006-1-NMD -4

5 Rogan series P006 Nipple with check valve P Type M (9/16" - 18 threads) , P Type M (3/4" - 16 threads) , P006-2-M4 1/4" igh pressure male , P006-2-LM6 3/8" Medium pressure male , P006-2-NFB 1/4" NPT Female , P006-2-NFC 3/8" NPT Female , P006-2-NMB 1/4" NPT Male , P006-2-NMC 3/8" NPT Male , P006-2-NMD 1/2" NPT Male , P006-2-X13 Low angle face seal (9/16" - 18 threads) , P006-2-M4 P006-2-LM6 P P P006-2-X13 P006-2-NMB P006-2-NMC P006-2-NMD P006-2-NFB P006-2-NFC -5

6 Rogan series P010 Coupler P Type M (3/4" - 16 threads) , P Type M (1" - 12 threads) , P010-0-LM12 3/4" Medium pressure male , P010-0-NFD 1/2" NPT Female , P010-0-NMD 1/2" NPT Male , P010-0-X23 Low angle face seal (3/4" - 16 threads) , P P P010-0-X23 P010-0-NFD P010-0-NMD P010-0-LM12-6

7 Rogan series P010 Nipple without check valve P Type M (3/4" - 16 threads) , P Type M (1" - 12 threads) , P010-1-LM9 9/16" Medium pressure male , P010-1-LM12 3/4" Medium pressure male , P010-1-NMD 1/2" NPT Male , P010-1-X23 Low angle face seal (3/4" - 16 threads) , P P P010-1-LM9 P010-1-LM12 P010-1-X23 P010-1-NMD -7

8 Rogan series P010 Nipple with check valve P Type M (3/4" - 16 threads) , P Type M (1" - 12 threads) , P010-2-NFD 1/2" NPT Female , P010-2-NMD 1/2" NPT Male , P010-2-X23 Low angle face seal (3/4" - 16 threads) , P P P010-2-X23 P010-2-NMD P010-2-NFD -8

9 C series C series pplications Features Types and pressures Torque Tensioning Stud Tensioning Rescue Bearing Pullers Intensifers ydrostatic Testing Pumps Jacks Spreaders Cable Cutters Nut Splitters Pipe Coupling Swegers Presses Clamping Fictures Crimpers Blow-out Preventers Working pressures to 29,000 psi. Non-drip valving for clean, safe, trouble-free performance and minimal air inclusion. Built-in safety locking device to prevent accidental disconnect. Wide range of threaded styles NPT, BSP and igh Pressure. daptors for ease of connection to high pressure hoses and fixed ports. Thread sizes from 1/8" to 3/8" Protective dust caps are included to prevent damage and fluid contamination in disconnected position. Rugged design and construction for long life in demanding applications. Type Max. working pressure (psi/mpa) Test pressure (psi/mpa) Nominal thru hole diameter (inch/mm) C Series ,500 / ,800 / / 2.8 C Series ,800 / ,200 / / 2.8 C Series ,800 / ,300 / / 2.8 NOTE: The choice of the threaded end form may limit the working pressure and the size of the thru hole in the coupling. -9

10 C series 115 Coupler C /4" BSP Female (thru type) , C /4" BSP Female (with built-in locking device) , C /8" NPT Female , C /4" NPT Female , C /8" NPT Female , C /4" NPT Female (with built-in locking device) , C /4" NPT Male , C /8" NPT Male , C C C C C C C C

11 C series 115 Nipple C /4" BSP Female , C /8" BSP Female , C /8" NPT Female , C /4" NPT Female , C /8" NPT Female , C /4" NPT Male , C /8" NPT Male , C C C C C C C

12 C series 116 Coupler C /4" BSP Female , C /4" BSP Female (with built-in locking device) , C /4" NPT Female , C /4" NPT Female (with built-in locking device) , C C C C

13 C series 116 Nipple C /4" BSP Female (thru type) , C /4" BSP Female , C /4" NPT Female , C C C Coupler C /4" BSP Female , C

14 C series 125 Nipple C /4" BSP Female (thru type) , C /4" BSP Female , C C

15 C series Quick coupling adapters C /4" BSP 120 external cone x 1/4".P. male , C /4" BSP 120 ext. cone x 9/16" UNF hose , C /4" BSP rubber metal seal , C /8" BSP rubber metal seal , C /4" BSP 120 external cone blind plug , C /4" BSP x 1/4" BSP with 120 external cones , C /4" BSP 120 ext. cone x 1/4" BSP 60 int. cone , C /4" BSP x 1/4" BSP with 60 internal cones , C /4" NPT Male x 1/4" BSP with 60 internal cone , C Porting block , M4BM4 1/4" BSP with 60 internal cone x 1/4".P. Male , C C C C C C C C C /2 C M4BM4-15

16 WB series WB series pplications Parker s WB Series couplings are designed for equipment used in cleaning applications such as paint removal or mill scale. The 10,000 psi operating pressure of the WB series makes it ideal for applications that require a high pressure coupling with minimal pressure drop. Features Specifications Push-to-Connect allows for quick, easy connections by elminiating the need to retract the sleeve to couple. Locking collets in the female half maintain 360 degree contact with male half to evenly distribute load and reduce brinelling. Zinc plating with yellow chromate finish resists corrosion. Straight through design allows for excellent flow with low pressure drop. Two knurled bands on the sleeve provide good gripping for operation of sleeve to disconnect. Sleeve Lock design prevents accidental disconnects. Stainless steel collets resist corrosion and provide smooth latching action. Teflon backup washer ensures sealing integrity at high pressure. Induction hardened locking groove on the male half reduces wear and brinelling. Sleeve guard prevents accidental disconnect and seals the opening between the sleeve and the body from the environment. Body size Temperature range 1/2-40 F to +250 F (-40 C to +121 C) Max. working pressure 10,000 psi (69 MPa) Rated flow 45 GPM (170 LPM) -16

17 WB series 125 WB coupler C D inch inch mm mm WB-501-8FP 1/2-14 NPTF , WB-501-8FP D C B 125 WB nipple C D inch inch mm mm WB-502-8FP 1/2-14 NPTF , E F WB-502-8FP G -17

18 Notes -18