Vectra On-Line 4850 Part Numbers and Prices Page 1

Size: px

Start display at page:

Download "Vectra On-Line 4850 Part Numbers and Prices Page 1"

Albert Willis
6 years ago
Views:

1 Part Numbers and Prices Page Ab Crunch Strap Ab Pulley assembly- with pulley- TWO VERSIONS- Revised 9/20/02 <comments> Ab Pulley Bracket- without pulley- TWO VERSIONS- Revised 9/20/02 <comments> Access Door (painted) 2.5AO Add-on plate- 2.5 pound 5.0AO Add-on plate- 5 pound Adjustable Pulley weldment (main column)- no pulley/hardware (uses bolt) Bar/Shaft- for press adjust- moves into notches (uses e-ring) Bar/Shaft- pivot for lat hold down Bar/Shaft- two are used inside row/ab seat back adjustment Base Channel/Foot- used to combine 1150 and 1850 when used as a Bearing- 608ZZ for leg press seat assy. (8 required- uses 50580, 50430, 20050) Bearing- freeway for most pivot points, used with #13790 button head bolts Bench Cam Follower weldment (original bench) Bench Leg Stop Bar- used in leg/ab station (original bench) Bench Leg Stop/Hold weldment (original bench) Bench Main Frame weldment (original bench) Bench Seat Bottom weldment (original bench) Bench Wheel Mount Tube (original bench) Bench Wheel weldment (original bench) Bi/Tri Column assembly Bi/Tri Column weldment- without cables, pulleys and hardware Bolt- ¼-20 X 1.25 hex for press guide rods Bolt- ½-13 X 6.00 for adjustable pulley in main column Bolt- 1/2-13 X 1 button head for most freeway bearing pivot points Bolt- 1/4 X 20 X.75 for mounting upholstery Bolt- 3/8-16 X.75 black button head used on leg press main frame (4 required) Bolt- 3/8-16 X ½ blk hex w/flange for wt. guards & upper stack support (14 required) Bolt- 3/8-16 X ¾ blk hex with flange for frame (30 required) Bolt- 3/8-16 X 1.25 to attach some pulleys (metal on 1 side) Bolt- 3/8-16 X 1.5 for columns, pulley assemblies (double, single, adj., etc.) Bolt- 3/8-16 X 1.75 for most pulley assemblies & column caps Bolt- 3/8-16 X 3 for top plate Bolt- 3/8-16 X 4 for most adjustable pulleys Bolt- 5/16 X.625, ¼-20 shoulder for row cable retainer Bolt- 5/16-18 X 1.5 for guide rod threaded inserts Bolt- 5/16-18 X 3 SHC for seat lock Bolt- 5/16-18 X 3/4 hex- used w/608zz bearings on leg press seat assembly Bolt- 5/16-18 X 6.5 to mount bench wheels (original bench) Box # Large Box- Arm/Leg (AL) Large Box Box- Small 4850 #2, includes 4th/press column, etc Bracket- attached to cable end-hooks onto press adjust lever Bracket for adjustable cable end (bi/tri) Bracket- for double-moving pulley (2 required) Bracket- part of press adjustment assembly that goes into notches Bumper- bottom of weight stack OBSOLETE (replaced with two each #57670) Bumper- for bench strut (original bench) Bumper- for row arm and leg press rest/down stop Bumper Tube- for butterfly arm pawl Bumper weight stack (two required)- replaces single piece Bumper/Plug-3/4 inch stem for b/fly cam, leg/ab seat & bench Bushing- bronze for butterfly cams Bushing Cap- left-side, secures press arm into press housing OBSOLETE Bushing Cap- right-side, secures press arm into press housing OBSOLETE CLRBushing Cap (right or left) secures press arm [uses (4) & (2)]

2 Part Numbers and Prices Page Bushing- nylon for butterfly arm Bushing- nylon, for pivot pulley, original bench & leg press seat Bushing- press arm (plastic ring version), press arm pivots on these Bushing- weight plate (all) & top plate Butterfly Arm assembly- left-side for 4800/3800/1850/4850/3850/VX Butterfly Arm assembly- right-side for 4800/3800/1850/4850/3850/VX Butterfly Cam assembly- left-side for 1400/1600/1850/4800/ Butterfly Cam assembly- right-side Cable- 10-inch extension for low pulley Cable- ab crunch station- 126" long Cable- bi/tri station- 48.5" long Cable- butterfly station " long Cable- high pulley " long Cable- leg extension " long (12.5" stripped) Cable- leg press (longest, goes to weight stack) " long 56970** Cable- low pulley- 140" (10" stripped) **OBSOLETE replaced with #59850 set Cable- low pulley set with 10-inch extension REVISION Cable- low pulley without 10-inch extension REVISION " long Cable- press adjustment inside press arm assembly Cable- row station " long Cable Set Cable Stop- slotted for leg extension cable (set screw #22280 sold separately) Cable Tie Calf/Row Block CBB Cambered Bar (black only) Clevis Pin/Bar/Shaft- 2-5/8 X 1/2- leg/ab seat back pivots on this (uses c-ring) Clip- accessary attachment used to anchor cable in row column Clip- Plated Row Seat Back Clip- used on row seat back assembly CGPB Close Grip Press Attachment Set- Black- allows close grip exercises on press arms CGPCP Close Grip Press Attachment Set- Classic Pewter- for close grip exercises on press arms CGPSS Close Grip Press Attachment Set- Sterling Silver- for close grip exercises on press arms CGPW Close Grip Press Attachment Set- White- allows close grip exercises on press arms Close Grip Press Attachment- right-side Close Grip Press Attachment- left-side Column Cap- for bi/tri column Column Cap- for main column Column Cap- for row column Column Cap- for weight stack column Cotter Pin- 3/16 X 1.5 inch for butterfly arms/cams (used w/#62850 washer) Cover- plastic, for press housing Cover Plate- for main column upper stack ("W") Cover Plate- for row/ab upper stack Curl Bar assembly- (straight) BLACK only Double Moving Pulley assembly- with pulleys & hardware E-Ring- 1/4 external used with shaft E-Ring/Crescent-Ring- used with press & row adjustment lever assemblies Floor Piece/Board- 4850/VX38 triangular Foam Roller Foot Plate assy- 1150/4850 leg press- Began shipping in separate box mid-feb Frame- main triangle (also used on VX38) Grip- 4 Inch for inner section of lat bar Grip inch used on row arm Grip- 7/8 I.D. X 8 inch- standard- REPLACED with #61890 "SS Cap" version Grip- 8-inch "SS Cap" version- replaces # Guide- nylon, for cable press arm cables

3 Part Numbers and Prices Page Guide Rod inches for press station, includes end cap Guide Rod inches for row station with tube connector, bolt & spacer Guide Rod inches for leg press includes tube connector, bolt & spacer Guide Rod inches for main column includes tube connector, spacer & bolt Handle- Single Grip 8-inch strap (replaces D-Handle) Hardware Kit Hose- for cambered bar rest on bi/tri column Hose Retainer weldment Label- "Manufactured by..." Label- "Vectra" 8 inch Label- "Vectra" for bi/tri column & stack column Label- "Warning..." for wt. guard Label- "Warning " for bench Label- large "On-Line 4850" for main column & row/ab column Label- left-side squat Label- right-side squat Label- wt. stack number sheet LEG PRESS station-revised 12/04 <comment> Label- wt. stack number sheet standard stacks -REVISED 12/04 <comment> Label/Decal- leg press seat adjust instructions Lat Bar assembly Lat Hold Down Latch Bar- painted, for leg press seat Latch/Lever- current version for squat attachments (9/00- uses spring pin) Latch for painted leg press seat stop Latch for painted leg press seat up Leg Develop weldment- current version without pads Leg Developer- current version with contoured leg pads Leg Press Main Frame assembly- 1150/ Leg Press Seat assembly- without upholstery Leg Press Seat weldment Leg/Ab Seat Bottom assembly- without upholstery, but with seat lock Leg/Ab Seat Bottom Handle- without seat lock strut or upholstery Leg/Ab Station 3850/4850 weldment Leg/Ab Station VX38/3850/4850 assembly Leg/Ankle Strap Lever- press & row seat adjust (requires #53790 crescent ring) Loctite ML Low Pulley Bracket- 6 Inch without pulley Lumbar Seat weldment Main Column assembly Main Column weldment- 3850/ Manual part 1 for all but leg press section Manual part 2 for leg press section Manual set (two manuals) Nut- 1/2-13 hex jam for 3850/4850 adjustable pulley Nut- 1/4-20 for row arm cable retainer pivot & press guide rods Nut used as jam nut on press cable adjustment screw Nut- 3/8-16, used in main frame Nut- 5/16-18 hex locking for original bench wheel bolt & 608ZZ bearing in leg press seat Nut -locking 3/8-16 hex for most pulley assemblies O-Ring-.75 ID for leg strap and ab strap O-Ring- 1 ID X 1/8 W neoprene for ORIGINAL selector pins Pad- contoured for current version leg developer (uses 2 #14500 screws) Padding- center of curl and lat bar, etc. (1 per bar)- replaces Padding- center of curl and lat bar, etc. Obsolete- replaced with Panel Fastener Clip/plug- used to secure column caps

4 Part Numbers and Prices Page Pawl- for butterfly arms Pin- row seat lock in seat back adjustment Pin- row seat pivot in seat back adjustment Pin/Dowel-.25 DIA X 1 for butterfly arm pawl PB?? Pinnacle Bench- complete (?? = color/color, ie BB for Black/Black) (original bench) Pinnacle Bench without upholstery (original bench) Pivot Bar- used on Pinnacle Bench (original bench) Pivot Lever assembly- main w/pulley "G" (foot plate attaches to this) Pivot Lever Stop assembly Plate- for top of 4th column- with pulley bracket Plug (Christmas tree)- black plastic for cable retainer openings Plug/Cover- 4800/4850/VX press pivot arms Poster part 1 of 2 for all but leg press Poster part 2 of 2 for leg press section Poster set (two posters) Press Arm/Handle assembly Press Housing assy (ORIGINAL thru 4/14/03 Must use w/orig. upper lever #57270) Press Housing assy (REVISED 4/14/03 Must use w/revised upper lever #60460) Press Lever assy- LOWER 4850/VX Press Lever assy-upper (ORIGINAL thru 4/14/03- Must use w/housing #57190) Press Lever assy-upper (REVISED 4/14/03 Must use w/revised housing #60420) Pulley- 4.5-inch Pulley- 6 inch Rack Housing- used in row seat back adjustment- has notches (painted) Retainer- for cable on leg developer and top of weight stack Retainer- for row arm cable Roll Pin- 5/16D X 1.25 for standard & current version leg developer Roll Pin- 5/32D X 7/8 for swivel pulleys, etc Row Arm assembly Row Seat Lever Row/Ab Column assembly Row/ab Column weldment- 3850/4850/VX Safety Tread- for calf/row block Safety Tread- for leg press foot plate Screw- ¼-20 X.50 phillip for leg developer pads & press bushing caps Screw- ¼-20 X 1.25 OPH for arm pads, D-handle & bushing cap tensioning Screw- 1/4-20 X.25 set screw for slotted cable stop Screw X 1.25 phillip for press adjust cable tension (uses #58920 jam nut) Seat Adjustment Strip- plated, 1150/4850 (and upgraded 48/1100) Seat Back weldment- row station, painted Seat Link- used in row station seat back adjustment, painted Seat Lock Strut/Latch assembly Seat Pivot weldment- bicep pad Selector Pin- ORIGINAL Vectra Precision plates ONLY OUT OF STOCK Selector Pin- short (4-3/8 in shaft) ORIGINAL Vectra Precision 10 LBS plates ONLY Selector Pin- REVISION 1/05- cannot be used with original 15-pound plates Selector Shaft- standard for 210 and 260 pound weight stacks (20 hole) Shaft-.05 DIA used on original bench Shaft-.5 DIA X for leg press seat pivot Shaft-.5 DIA X 8 for row station upper back pivot Shaft-.5 DIA X 8.5 for leg developer/seat pivot (seat pivots on this) Shaft- for bench main pivot (original bench) Shaft- for row/leg seat back pivot Shaft- for zinc/carb bench cam follower (original bench) Shaft Retainer-.5 shaft (large) for most shafts Single Moving Pulley assembly- with pulley & hardware

5 Part Numbers and Prices Page Single Moving Pulley assembly- with pulley & hardware Single Moving Pulley bracket- without pulley Spacer-.615 X.25 X.375L nylon for D-handle Spacer-.81 X.52 X.5 nylon for guide rods Spring-.42OD X 1.25" long for original bench wheel assembly (2 required) Spring- both sides current version squat attachment latches (9/00) Spring- butterfly arm pawl Spring- extension 1.25FL for lat hold down, press handle & seat adjust Spring- extension 8.4 x 1 dia. for press station weight reduction Spring Pin-.25 X 2.75 for lat/leg hold down & press handle Spring Pin- 5/32 X 1-1/4 for current version squat latch (9/00) Squat Attachment- left-side Squat Attachment- right-side Stack Column assembly w/o guide rods Stack Column/4th Column ONLY- no pulleys, labels, etc Strut- bench back weldment (original bench) Tape- UHMW 1 X.015 X 2 used in seat back adjustment Tie- 4 inch plastic Top Plate (original)- weight stack- REPLACED with # / Top Plate- weight stack- Revised/New beginning 1/ Touch-Up Paint- Black bottle Touch-Up Paint- Black can Touch-Up Paint- Silver bottle Touch-Up Paint- Silver can Touch-Up Paint- White bottle Touch-Up Paint- White can Trim Strip- for ab pulley Trim Strip- for current version leg developer (contoured pads) Trim Strip- for weight guard (71"per guard- generic#- not for specific location) Trim Strip- used at leg seat lock Tube Closure/End Cap- ½ X 1½ BLUE for adjustment levers Tube Closure/End Cap- 1 inch DIA X 16GA for press station guide rods Tube Closure/End Cap- 1 inch round for current squat attachments (9/00) Tube Closure/End Cap- 1 X 2 X 10-14GA used on original bench & press lever Tube Closure/End Cap inch for end of press handle Tube Closure/End Cap inch round external for butterfly arms Tube Closure/End Cap- 1½ X 14 GA for original bench Tube Closure/End Cap- 2 X 2 ribbed external PVC for original bench Wheel- used on bench Tube Closure/End Cap- round single piece closure/retainer for foam rollers Tube Connector- 1/4-20 X 3/4 threaded insert for D-handle Tube Connector- 5/16-18 X 1" threaded insert for guide rods Upholstery- butterfly arm pad BACKING BOARD ONLY- left side Upholstery- butterfly arm pad BACKING BOARD ONLY- right side Upholstery- butterfly station arm pad- left side Upholstery- butterfly station arm pad- right side Upholstery- Lower back pad Upholstery- Bench seat back ORIGINAL bench ONLY (8-hole) Upholstery- Bench seat back VECTOR bench ONLY (6-hole) Upholstery- seat back butterfly station Upholstery- seat back leg/ab station Upholstery- seat back/biceps pad Upholstery- seat bottom bench Upholstery- seat bottom butterfly station Upholstery- seat bottom leg press Upholstery- seat bottom leg/ab station

6 Part Numbers and Prices Page Upholstery- ORIGINAL bench full set Upholstery- VECTOR bench full set Upholstery Set/Kit (boxed)- 1150/4850 (Part 2 for 4850) Upholstery Set/Kit (boxed)- 1850/3850/4850 (part 1 for 4850) Upper Stack Support assembly (main column)- with pulley & hardware Upper Stack Support- without pulley & hardware Vector Bench assembly without upholstery (components listed on separate sheet tab) VB??? Vector Bench- complete/boxed Washer-.438 X.322 X.020- for leg press seat 608ZZ bearing Washer-.688 X.39 black nylon for taking up slack in leg/ab seat assembly Washer X 1.14 X.065 for leg press foot plate bearings Washer- 7/8-16 X ½ X 14GA Washer- finishing for D-handle and butterfly arm pads Washer- neoprene bumper for top plate- standard Washer- neoprene, top plate at press station ONLY Washer/Bushing- 1-1/2 X 1 X 14GA for b/fly arms/cams (uset w/#12340 cotter) Weight Plate- 10 pound- Revised/New 1/ Weight Plate- 15 pound- Revised/New 1/ Weight Plate- box of five 10 pound plates- Revised/New- 1/05

Vectra On-Line 1850 Part Numbers and Prices Page 1

Vectra On-Line 1850 Part Numbers and Prices Page 1 Part Numbers and Prices Page 1 69020 Ab Crunch Strap 55850 Ab Pulley assembly- with pulley- TWO VERSIONS- Revised 9/20/02 54790 Ab Pulley Bracket- without pulley- TWO VERSIONS- Revised 9/20/02 57900 Access