Technical data MINIDELTA. Código: MD-01-I Revisión: 1 14/01/ TECHNICAL CHARACTERISTICS A.B.S. END CAPS A CURRENT

Transcription

1 1. TECHNICAL CHARACTERISTICS LIGHT FITTING BODY END CAPS CURRENT POWER SOURCES Lacquered steel A.B.S A V, 50-60Hz (electronic) A (230V) For other voltages, please ask LAMP TYPE T5 IP INDEX IP 20 ELECTRICAL INSULATION Class I WORKING TEMPERATURE ACCORDING TO STANDARD -20ºC to +45ºC N E 2. IMAGES 1 TUBE 2 TUBES DUBLE LAMPHOLDER P A G E 1 / 1 1

2 3. DIMENSIONS AND OTHER DATA 1 LAMP 2 LAMP 2 T LAMPS 4. AVAILABLE POWERS 1 TUBO / 2 TUBOS POWER(W) LENGHT (mm) PACKAGING(uds) ELECTRONIC DIMMABLE AHIGH EFFICIENCE HIGH OUTPUT P A G E 2 / 1 1

3 4.1. FOR T8 LAMP. Under order, it is posible to manufacture Minidelta for T8 lamp, with one or two tubes (Only with T lampholder) AVAILABLE T8 POWER. 1 LAMP / 2 LAMP T T8 POWER (W) LENGHT (mm) ELECTRONIC DIMMABLE P A G E 3 / 1 1

4 5. SPECIAL ACCESSORIES 5.1. REFLECTORS They can be polished aluminum or lacquered steel reflector. 1 tube 2 tubes Asymmetrical E Asymmetrical i Reflector alignment piece REFLECTOR ALIGNMENT PIECE P A G E 4 / 1 1

5 5.2. CONQUICK CONNECT. It is possible to connect several luminaries by mounting a quick connector that allows connec- tions in continous line. To see the number of strips connected in line, consult our Technical Department. The maximum number of luminaires to be connected, according to Powers, is as follows: POTENCIA TUBO (W) TUBOS CANTIDAD P A G E 5 / 1 1

6 5.2. SUSPENSIONS ELEMENTS STEEL CABLE (1900 mm) STEM TUBE (95, 250, 500, 1000, 1500 mm) 5.3. FIXING ELEMENTS THROUGH TRACK Tracks There are 4 different profiles of tracks, 3 in aluminium and one in white laquared steel, each of them in lengths of 3000 mm. (for 2 light fitting of 35 w / 49w) and 3598 mm. (for 3 light fitting for 28 w / 54 w). ALUMINIUM TRACKS Fastener for track, track cap, end cap and tranck joint for tracks JOINT TRACKS END CAPS STEEL TRACK FASTENER FOR TRACK ALUMINIUM TRACK CAP A.B.S. TRACK CAP Track holder for Armstrong ceiling. P A G E 6 / 1 1

7 5.3. ELECTRIFIED TRACK. The electrified track for Minidelta version is only available in steel, in the same lengths as non-electrified versio- na. The cover will be available only in ABS plastic. The accessories, caps, couplings, etc., are the same. STEEL TRACK End track connectors are smaller tan Minidelta batten, so they are covered by it. Intermediate connectors may be covered by the plastic track cap Track connnector Luminaire connector Union connectors between tracks. P A G E 7 / 1 1

8 6. APPLICATIONS Due to his small size the light Mini Delta is adapted for limited places. 7. PHOTOMETRY 1 Tube light fitting T5 1 Tube light fitting T5 with polished aluminum reflector 1 Tube light fitting T5 with lacquered steel reflector P A G E 8 / 1 1

9 2 Tubes light fitting T5. 2 Tubes light fitting T5 with polished aluminum reflector 1 Tube light fitting T5 with lacquered steel reflector. For major information put in touch with the technical department. P A G E 9 / 1 1

10 8. VERSION LED TUBES 8.1. IMAGENES 8.2. MEASUREMENTS AND OTHER INTEREST DATA. The Minidelta version LED tubes is only for one tube. 1 TUBE -E 1 TUBE LED TUBES LENGTH (mm) LENGTH (mm) PACKAGING (uts) All the accesories can be use for the LED versión (tracks, quick connection, suspensions, ) except reflectors and emergency kits. The photometry depends on the LED tube to be installed. P A G E 10 / 1 1

11 8.3. WARNINGS 1.) AIRFAL INTERNATIONAL will produce all the LED tube luminaires to the client specifications. The client will give Airfal the electric diagram of the tuve to be installed in the luminaires that he purchases. 2.) AIRFAL INTERNATIONAL will manufacture luminaires luminaires for the LED tuve chosen by the client. In no case Airfal will be responsable forn the operation of the LED tubes, being these ultímate responsable for the correct operating of the light fitting. 3.) The supplier of the LED tubes will have to add to the light fitting the user guide of the tubes, to avoid that they are replaced by another brand and model with different wiring. For major information put in touch with the technical department. P A G E 11 / 1 1