Running Magnet 2.0 Surface High-tech LED lighting system for interior architecture

Transcription

1 Description Fun with magnets and light. Simultaneously graphic and subtle, the Running Magnet is flexible, precise, and as creative as you. It is track lighting redesigned and elegantly refined. Light elements snap in place and connect automatically though the magic of magnets. Extruded aluminum housings create a clean 1-3/-inch slot and preconfigured corners complete the system that can run up, around and across walls and ceilings. Finishes align perfectly, always, because Running Magnet can be easily cut on site (except Suspension Up&Down). Linear LED and accent fixtures, available in a variety of sizes, can be exchanged and repositioned quickly, without tools, with artistic results. The Running Magnet is perfect for retail displays where frequent changes are typical and absolute performance is mandatory. Lamps Construction Multispot: 10W, 4x 210lm, K, 10W, 4x 210lm, K, Mini Glo-ball: 7W, 00lm, K, 0 7W, 0lm, K, 0 Mini Glo-Ball S: 3.5W, 400lm, K, 0 3.5W, 440lm, K, 0 Find Me Suspension: W, 560lm, K, W, 600lm, K, Spot Module: W, 600lm, K, W, 550lm, K, Light Strip, 11. : 5W, 460lm, K, 5W, 435lm, K, Light Strip 23.6 : 10W, 920lm, K, 10W, 70lm, K, Light Strip 35.4 : 15W, 130lm, K, 15W, 1305lm, K, Light Strip 47.2 : 20W, 140lm, K, 20W, 1740lm, K, Spot 120: W, 1060lm, K, W, 95lm, K, Extruded aluminum housing with integral DALI controllable track system. Electrical 24V electrical system limited to a maximum load of 4A and 100W per driver. Spot and linear luminaires available with individually addressable DALI circuitry or built-in dimmer on each fixture head. EC to supply site cabling from driver to track location and site UL listed enclosure. Surface Profile Trimless extruded aluminum profile to be surface mounted on ceilings Linear profiles available as feed profiles to connect to a driver and intermediate profiles to fill in remaining lengths. Each feed profile comes with two end caps. Available lengths: 39.4, 59, and 7.7 All linear profiles are field cuttable. Corners available for continuous runs. Track can be powered through corners. Corners are not field cuttable. Photometrics For current IES files please visit architectural.flosusa.com Warranty 2 years from date of sale. Notes Consult factory for other ceiling types including accoustic tile ceilings and wood. Listings: UL Listed, IP20 dry location only, Class 2, Meets California standards for commercial interiors. Page 1 of 7

2 Luminaries Light Strip Module HE Spot Module Mini Glo-Ball Spot 120 Find Me Suspension Linear Hight Efficency LED can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets Built-in dimming switch dims fixture with allen key from % Clear end caps included for continuous look when installing end-to-end Accent LED Spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets Built-in dimming knob dims fixture from % Standard beam spread is 14 Additional interchangeable lenses available in 27 and 36, and 10 x 42 elliptical beam spread Decorative modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect with magnets Built-in dimming knob allows fixture to dim from % Accent lighting LED module to be installed in The Running Magnet 2.0 System Built-in DC/DC electronic voltage converter. Built-in dimming knob dims fixture from % Standard beam spread are 24º and 33º Honeycomb and cross baffle included Profiles The extruded aluminum housing creates a clean 1-3/ slot that can be run up, around and across walls and ceilings. Vertical and horizontal corners complete the system. The magnetic luminaries are simply installed by insertion. Linear tracks are available in two versions: power feed profiles for connecting to a driver, and intermediate profiles. End caps and connection cables are included with each power feed profile. Internal foam for opening support should not be removed until after installation. 1.6 [41 mm] CEILING LINE Length 39.4 (1m) Feed Unit Profile Intermediate Profile Finish 3.9 [100 mm] 59 (1.5m) [35.0 mm] 7.7 (2m) Corners Horizontal corners available for turns in the same plane, inside corner to transition from wall to ceiling or from wall to wall and external corners to transition from wall to wall surfaces or around soffits. Corners are prepared to feed a structure in both directions without the need of a feed profile.. [223mm] 3.1 [7mm] 7 [17mm] Horizontal Corner Inside Corner [17mm] [223mm] 3.1 [7mm] Page 2 of 7

3 Optional Accessory Extra End Caps A A Drivers LED Driver- 96W Optronic 24V Driver, no dimming wire configuration LED96W24V-Non-Dim Add Lunatone 0-10V to Dali converter for dimming installation Splice Box SP-24V-96W-Non-Dim 13 [347mm] 1.7 [46mm] 2.2 [59mm] Page 3 of 7

4 Light Strip Module HE Linear High Efficency LED can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets. Built-in dimming knob dims fixture from %. Clear end caps included for continuous look when installing end-to-end. 2. [72 mm] SEE TABLE 1.3 [34 mm] Light Strip Length Initial Lumen Non dimming DALI - Dimming 11. (300mm) DD DD 23.6 (600mm) DD DD 35.4 (0mm) DD DD 47.2 (1200mm) DD DD Spot Module Accent LED Spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets. Built-in dimming knob dims fixture from %. Standard beam spread is 14. Additional interchangeable lenses available in 27 and 36, and 10 x 42 elliptical beam spread. Initial Lumen Beam Spread Built in % Dimming DALI-Dimming Photometric º 14º A A ADD ADD 6199 Cd/Klm E(lx/Klm)D (m) h(m) Optional Accessories º 4. [121 mm] Flood Lens Accessory 23 ø 1.3 [34 mm] Wide Flood Lens Accessory º Elliptical Lens Accessory 6.7 [170.2 mm] Extra long snoot for added shielding in aluminum with black finish (does not protude from channel when tucked up into housing) Page 4 of 7

5 Multi Spot 4 Accent lighting LED module to be installed in The Running Magnet 2.0 System. Built-in DC/DC electronic voltage. Initial Lumen Beam Spread Built in % Dimming DALI-Dimming Photometric 4x 210 4x º 10º DD DD 6199 Cd/Klm E(lx/Klm)D (m) h(m) Optional Accessories Flood Lens Accessory Wide Flood Lens Accessory [69mm] Elliptical Lens Accessory 4. [121 mm] 1.3 [33 mm] 4.7 [119 mm] Spot 120 Initial Lumen Beam Spread Finish Built in % Dimming DALI-Dimming 95 24º DD DD º DD DD [40mm] 4. [130 mm] [22mm] º 33º DD DD DD DD [200mm] ø 1.3 [46 mm] Page 5 of 7

6 Other Light Module Decorative modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically through the magic of magnets. Built-in dimming knob allows fixture to dim from %. Mini Glo -Ball [70.9 mm] [4. mm] ø 4.3 [110 mm] Initial Lumen Built-in Dimming DALI-Dimming B B DD DD Mini Glo - Ball S Find Me Suspension 2.5 [64.1 mm] 2.5 [64.1 mm] 11 [ mm] MAX. 11 [ mm] MAX..7 [220 mm] 3.5 [9.5 mm] ø 4.3 [110 mm] ø 1.3 [33 mm] Initial Lumen Finish Built-in Dimming DALI-Dimming Mini Glo - Ball S B B DD DD 30 = White C CDD C CDD Find Me Suspension 06 = Chrome 30 = White C C CDD CDD C CDD 06 = Chrome C CDD Page 6 of 7

7 How to Specify A. Select and position corners Horizontal - Connect sections on flat surfaces ( corner) C. Drivers Quantity of drivers determined by total wattage or light elements in section (approximately one every 10 feet). Maximum driver distance is 15. Locate drivers nearby. DALI dimming hardwires into profile, bypasses driver. B. Fill lengths between corners with Linear Housings 3 or 6 sections can be specified as feed or intermediate profiles. Profile can be easily cut to site to exact length and joined together. D. Select Light Modules Linear strips are available in five nominal lengths: 1, 2, 3, 4 and 5. Individual units can be adjusted from % with on board switch. Visit FLOS Worldwide YouTube channel for installation videos Page 7 of 7