SPEQ -S. Small Cylinder Track Head

Transcription

1 SPEQ -S Features esigned to let the interior design and not the lighting take center stage, the SPEQ track head from Amerlux balances clean, minimal aesthetic design with industry leading optical performance. The fixture has no visible heat sink or venting and has snoot perfectly matched to provide excellent glare control while maintaining the clean fixture lines. The integral driver is fully featured with low end dimming and full 2.5 KV surge protection (not a lamp driver!) Perfect for Galleries, Retail and Commercial interiors SPEQ uses high end optical designs to ensure your space is lit perfectly and efficiently. Product Overview Type: attage: umen Output: CP: Color Temp: CRI: imming: Track Accent & isplay 9, 15 1,310 max (15, Spot optic), 89.5 lm/ 9,393 max (15, Spot optic) 2200K, 2700K, 3000K, 3500K, 4000K 83 typ. & + typ. Crisphite & 3K Class A E's available TRIAC & EV (120V) - 5% im SPEQ Fixture Summary (see following pages for more information) Performance Chart Nominal atts elivered umens P CP Color Temp , K , , K-83 ata is based on 3000K-83 IES files available on website. ata is based on Spot optic. Electrical ata 9 System atts Amps System atts 15 Amps 120V V N/A N/A N/A N/A Electronic constant current E driver 5 IT /11/18 Page 1 of 7

2 Ordering Information SPEQ-S-A E/TE 8 9 SPEQ Model SPEQ-S-A17 attage 9 15 Finish T - white texture BT - black texture ST - silver texture Other finishes, consult factory Mounting TN1 - Global 1cir/H-Style, 120V TEK - Global 2cir/2neut, 120V TN3 - Global 3cir, 120V CT - J-Style, 120V O - -Style, 120V B* - busway, 120V C - canopy, 120V CC2-SCP - C-clamp, black, with straight cord**, 6 CC2-CCP - C-clamp, black, with coil cord**, 5 Notes: * busway adapter used for ST finish ** cord used for BT & ST finish, hite cord used for T finish Color Temp 83 CRI: + CRI: K K-+ CRISP - Crisphite K K-+ 3CA - 3K Class A K K K K K-+ river E/TE - TRIAC/EV dimming, 120V only Options/Accessories (standard front door accepts up to 2 accessories) SN - snoot (accepts up to 2 accessories or cross blade + 1 accessory) HEX - hexcell louver SO - solite beam softening lens - cross blade (requires snoot) 5 Voltage Beam Spreads SP - spot 15 NF - narrow flood 22 MF - med flood 25 F - flood 28 F wide flood VF - very wide flood S - linear spread lens x 10 (reduces # of accessories by 1, if applicable) The "A" refers to the sequential revision in a year and "XX" refers to the year of update. Updates coincide with improved performance while not changing the overall fixture aesthetic and are reflected in the published performance data. Please contact your Amerlux representative for explanations of changes. IT /11/18 Page 2 of 7

3 Specifications Application Retail, Museum, Gallery, Hospitality and Commercial accent and display lighting Construction Complete die-cast aluminum construction No exposed wiring Unique magnetic dual lock front door Optical Amerlux esigned TIR optical system 0-º tilt, 3º rotation Tilt indicating marks for common tilt positioning Beam Spreads: Spot 15, Narrow Flood 22 Medium Flood 25, Flood 28, ide Flood Very ide Flood, inear Spread ens x 10 E Colo r Temp Options: 2200K, 2700K, 3000K, 3500K, 4000K CRI: 83 typ. (2700K, 3000K, 3500K, 4000K) + typ. (2200K, 2700K, 3000K, 3500K, 4000K) Crisphite* and Class A** 3000K Es available R9 Values: 11 (83 CRI), 55 (+ CRI) Binning: 3 MacAdam (SCM) ife: 50,000+ hrs, > 70% of initial lumens at 50,000 hrs *Crisphite: Crisphite Technology delivers the warmth of colors expected from a high CRI solution but also creates the natural crisp white color similar to CMH sources. It creates impactful lighting by revealing the richest whites and vibrant colors that pop. **Class A E: Class A E s have a CRI > 80 and a GAI > 80. CRI defines color Naturalness and GAI defines color Saturation. Both being high delivers rich colors and pure whites. Electrical attage: 9, 15 Electronic constant current E driver, 120V input This product complies with IEEE C62.41 for surge endurance up to 2.5KV. Amerlux recommends using additional surge protection with this unit (supplied by others), surge and over voltage damage is not covered under warranty. river E/TE - eading Edge (Triac, Forward Phase) or Trailing Edge (EV, Reverse Phase) autosensing driver dims down to less than 5% on most dimming system. river rated for A/C voltage input +/- 10% See dimming page for more information. Finish Powder coat paint. Standard colors: hite Texture, Texture, Silver Texture Consult factory for custom RA powder coat finishes Mounting Track, canopy, c-clamp and busway. Note: Ceiling mounted track only Certifications Approved to U standards as tested by CSA. Intended for indoor use only. arranty 5 year limited warranty SPEQ IT /11/18 Page 3 of 7

4 SPEQ-S 3 5 /16 Ø1 5 /8 SPEQ Shown with TN1 adapter / / / /4 Ø2 3 /4 3 5 /16 SPEQ-S SNOOT & ACCESSORIES 3 5 /16 Ø1 5 /8 Shown with TN1 adapter Clear ens inear Spread ens Solite ens Prismatic ens 5 15 / / /8 4 5 /16 Front oor Hexcell ouver Snoot 1 5 /16 Ø2 3 /4 Snoot Cross Blade (requires snoot) SPEQ-S CANOPY MOUNT Ø5 Ø4 Ceiling Cut Out 4" Octagonal J-Box (by others) 1/2 Ø1 5 /8 5/8 1/4 1 5 /8 6 7 / / / / /16 Ø2 3 /4 3 5 /16 IT /11/18 Page 4 of 7

5 FIXTURE ATA: (Complete photometric data (.ies format) available upon request) MUTIPYING FACTORS: (Multiplying Factor is based on 3000K V IES file on website) attage: 9 15 Factor: CCT: 2700K K K K-83 Factor: CCT: 2200K K K K-+ CRISP 3CA Factor: SPEQ 15 E, 3000K (For F, F & VF beam options see pg 6) Spot (SP), 15 Narrow Flood (NF), 22 T # T # umens: 1,310 umens: 1,204 Medium Flood (MF), 25 T # umens: 1, APPICATION ATA: Notes and efinitions: Beam spread is to 50% center beam candlepower (CP). =istance to floor or wall. = on floor or wall at center beam aiming location. =Effective Visual Beam length in feet (50% of maximum footcandle level). =Effective Visual Beam width in feet (50% of maximum footcandle level). =istance across or down to center beam location. 30 SPOT NARRO FOO MEIUM FOO 0 o Aiming Angle Horizontal Horizontal º o Aiming Angle IT /11/18 Page 5 of 7

6 FIXTURE ATA: (Complete photometric data (.ies format) available upon request) MUTIPYING FACTORS: (Multiplying Factor is based on 3000K V IES file on website) attage: 9 15 Factor: CCT: 2700K K K K-83 Factor: CCT: 2200K K K K-+ CRISP 3CA Factor: SPEQ 15 E, 3000K (For SP, NF & MF beam options see pg 5) Flood (F), 28 T # umens: 1,184 ide Flood (F), T # umens: 1,171 Very ide Flood (VF), T # umens: 1, APPICATION ATA: Notes and efinitions: Beam spread is to 50% center beam candlepower (CP). =istance to floor or wall. = on floor or wall at center beam aiming location. =Effective Visual Beam length in feet (50% of maximum footcandle level). =Effective Visual Beam width in feet (50% of maximum footcandle level). =istance across or down to center beam location. 30 FOO IE FOO VERY IE FOO 0 o Aiming Angle Horizontal Horizontal º o Aiming Angle IT /11/18 Page 6 of 7

7 IMMING COMPATIBIITY: Amerlux Speq fixtures are compatible with all major dimming protocols prevalent in the United States. Please see below for general compatibilities and wiring diagrams. Amerlux recommends testing your unique dimming configuration as the exact full configuration (immer, Fixture Quantity, Voltage, etc) may affect dimming performance. --- NOTE: INFORMATION BEO IS FOR IRE IMMERS ONY. FOR IREESS IMMERS, CONSUT FACTORY --- TRIAC (Forward Phase) IMMING (Standard) Utilizes Standard incandescent dimmers that are in wide use in installations across the US.. Notes: 120V only ims down to less than 5% light output (most cases) Consult imming manufacturer for installation instructions - O NOT SHARE NEUTRAS! Must meet dimmer Minimum oad Requirements per dimming manufacturer Compatible immers all Box (Incandescent Style, attage as required) utron iva utron Vareo utron Nova-T utron Skylark utron Maestro TRIAC iring iagram ine TRIAC imming Control hite Green ine river V+ V- Red SPEQ EV - Electronic ow Voltage (Reverse Phase) IMMING (Standard) Utilizes specialized EV dimmers. Notes: 120V only ims down to less than 5% light output (most cases) Consult imming manufacturer for installation instructions - O NOT SHARE NEUTRAS! Must meet dimmer Minimum oad Requirements per dimming manufacturer EV iring iagram ine EV imming Control hite Green river ine V+ V- Red Compatible immers all Box (EV Style) utron iva utron Nova-T utron Maestro eviton Surslide utron Vareo utron Skylark eviton Vizio IT /11/18 Page 7 of 7