RM 10 Core and Accessories

Transcription

1 Core and Accessories Individual parts Part no. Page Adjusting screwdriver (for assembly only) B Matching handle B Adjusting screw B Core B Clamps B Insulating washer 1 B Coil former B Core B Threaded sleeve (glued-in) Insulating washer 2 B Example of an assembly set Also available: Coil former for power applications B RM 10 low-profile core B65813-P 259 Siemens Matsushita Components 251

2 Core B65813 In accordance with IEC Cores without center hole for transformer applications RM cores are supplied in sets Magnetic characteristics (per set) Σl/A l e A e A min V e with center hole 0, without center hole 0, mm 1 mm mm 2 mm 2 mm 3 Approx. weight (per set) m 20,7 22 g Gapped Material A L value nh s approx. mm µ e Ordering code 1) -D with center hole -N with threaded sleeve -J without center hole N ± 3 % 0, B A ± 3 % 0, B A48 N ± 3 % 0,44 90 B65813-J250-A ± 5 % 0, B65813-J630-J ± 10 % 0, B65813-J1600-K41 N ± 5 % 0, B65813-J630-J87 1) Replace the + by the code letter D or N for the required version. 252 Siemens Matsushita Components

3 Core B65813 Ungapped Material A L value µ e A L1min P V Ordering code nh nh W/set -J w/o center hole N / 20 % 2720 B65813-J-R30 T / 20 % 3940 B65813-J-R35 T / 30 % 5730 B65813-J-Y38 N / 20 % ,75 B65813-J-R49 (50 mt, 500 khz,100 C) N / 20 % ,90 B65813-J-R67 (200 mt, 100 khz, 100 C) N / 20 % ,30 B65813-J-R87 (200 mt, 100 khz, 100 C) N / 20 % ,80 B65813-J-R41 (200 mt, 25 khz, 100 C) Siemens Matsushita Components 253

4 Accessories B65814 Coil former Material: GFR thermosetting plastic (UL 94 V-0, insulation class to IEC 60085: H max. operating temperature 180 C), color code black Solderability: to IEC , test Ta, method 1 (aging 3): 235 C, 2 s Resistance to soldering heat: to IEC , test Tb, method 1B: 350 C, 3,5 s Winding: see page 152 Squared pins. For matching clamp and insulating washers see page 256. Sections A N l Nmm A R value Pins Ordering code mm 2 µω 1 41, B65814-N1008-D1 10 B65814-N1010-D1 11 B65814-N1011-D1 12 B65814-N1012-D B65814-N1008-D2 10 B65814-N1010-D2 11 B65814-N1011-D2 12 B65814-N1012-D2 12 pins 11,1+0, ,6 _ 0, Version 8 pins 10 pins 11 pins Pins omitted 2, 5, 8, 11 2, ,55 _ 0,2 12,25 _ 0,2 0,65±0, ø21 _ 0,2 ø12,5 _ 0,2 5,5±0,3 0,59±0,06 1±0,05 0,5 Hole arrangement View in mounting direction ø1+0,1 Erdungspunkte Ground Ø ø1,3+0,1 2,54 60 FRM0271-W _ Siemens Matsushita Components

5 Accessories B65814 Coil former for power applications Optimized for automatic winding Material: GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 C), color code black Solderability: to IEC , test Ta, method 1 (aging 3): 235 C, 2 s Resistance to soldering heat: to IEC , test Tb, method 1B: 350 C, 3,5 s Winding: see page 152 For matching clamp and insulating washer 1 see page 256 Sections A N l Nmm A R value Pins Ordering code mm 2 µω 1 41, B65814-C1512-T1 Marking of pin 1 Ground Ø 1,3+0,1 Hole arrangement View in mounting direction (Note half pitch!) Siemens Matsushita Components 255

6 Accessories B65814 Clamp With ground terminal, made of stainless spring steel (tinned), 0,45 mm thick Solderability to IEC , test Ta, method 1 (aging 3): 235 C, 2 s Also available as strip clamp on reels Insulating washer 1 between core and coil former For tolerance compensation and for insulation Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E 120 C), 0,06 mm thick Insulating washer 2 for double-clad PCBs Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E Clamp (ordering code per piece, 2 are required) Insulating washer 1 (reel packing, PU = 1 reel) Insulating washer 2 (bulk) 120 C), 0,3 mm thick Ordering code B65814-A2203 B65814-B5000 B65814-B2005 Clamp Insulating washer 1 Insulating washer Siemens Matsushita Components

7 Accessories B63399 B65679 Adjusting screw Tube core with thread and core brake made of GFR polyterephthalate Plastic adjusting screwdriver (not shown) Plastic handle for adjusting screwdriver (not shown) Core RM 10 Adjusting screw Tube core Min. adjusting Material A L value nh length mm Material Color code range % N ,55 6,3 N 22 red ,98 6,3 N 22 black Ordering code B65679-E3-X22 B65679-E2-X ,15 6,3 N 22 white 17 B65679-E1-X22 Adjusting screwdriver B63399-B1 Handle B63399-B5 Adjusting screw Siemens Matsushita Components 257

8 Inductance adjustment curves (nominal values) Relative inductance change L/L versus turns N of adjusting screw. 0 at least 2 turns engaged. Adjusting screw B65679-E3-X22 Color code red Adjusting screw B65679-E2-X22 Color code black Adjusting screw B65679-E1-X22 Color code white 258 Siemens Matsushita Components

9 »Low Profile«Core B65813-P For compact transformers Without center hole RM cores are supplied in sets Magnetic characteristics (per set) Σl/A = 0,34 mm 1 l e = 33,9 mm A e = 99,1 mm 2 A min = 93,3 mm 2 V e = mm 3 Approx. weight 17,2 g/set Ungapped Material A L value µ e A L1min P V Ordering code nh W/set N / 20 % ,62 (50 mt, 500 khz, 100 C) N / 20 % ,72 (200 mt, 100 khz, 100 C) B65813-P-R49 B65813-P-R87 Siemens Matsushita Components 259