LANDSCAPE 12 / 120 VOLT. 12 Volt / 120 Volt. Landscape

Transcription

1 LANDSCAPE 12 / 120 VOLT 12 Volt / 120 Volt Landscape C O M P R E H E N S I V E C A T A L O G

2 KIM Landscape Lighting Kim Lighting is known throughout the world as the premier designer and manufacturer of quality, high performance, and architecturally relevant outdoor lighting solutions. Kim Lighting is a division of Hubbell Lighting, Inc. MAILING ADDRESS P.O. BOX CITY OF INDUSTRY, CA BUSINESS ADDRESS EAST GALE AVENUE CITY OF INDUSTRY, CA PHONE: FAX: ENTIRE CONTENTS COPYRIGHT 2011 KIM LIGHTING INC. ALL RIGHTS RESERVED REPRODUCTION IN WHOLE OR IN PART WITHOUT PERMISSION IS STRICTLY PROHIBITED. U.S. PATENTS D407,842, D417,520, AND D424,731 Additional Landscape Catalogs Printed in U.S.A Version 1.5 (8/11) KIM LIGHTING

3 Table of Contents Product Design 2-3 Product Style Index 4-5 Product Application Index 6-7 Surface Accent 8-37 Sign / Wall Lighter In-grade Path & Accent Surface Path & Step Lights El Dorado Economy Series Options & Accessories Photometric Guide Volt Lamp Guide Volt Lamp Guide 113 Safety & Maintenance 114 Warranty 115 Alphanumeric Index 116 kimlighting the next generation of landscape lighting Kim Lighting offers a wide variety of energy efficient LED products. See page 117 for LED model selections. KIM LIGHTING 1

4 Product Design Construction Features PREMIUM QUALITY MATERIALS Brass, Copper, and Bronze The design, manufacture and finishing of copper and bronze fixtures is a craft that dates back eight decades at Kim. Constructed of the ultimate materials for corrosion resistance, brass, copper and bronze fixtures are offered in a hand applied verde patina, or unfinished to allow natural aging. Aluminum Whether cast, spun or extruded, only the most durable aluminum alloys are used in Kim landscape products. Extra heavy wall thickness is engineered into every component for increased strength, and each aluminum fixture receives an eight-stage powder coat paint finish. PRODUCTION AND ASSEMBLY Kim products are manufactured with the latest computer automated machinery. Rigid inspection is performed by all Kim employees to assure conformance to engineering specifications. Final assembly is performed by dedicated individuals who support the Kim heritage of uncompromising quality. 2 KIM LIGHTING

5 12 Volt / 120 Volt PERFORMANCE Kim landscape luminaires are engineered to use the latest lamp technology including halogen and compact fluorescent. This assures maximum performance with minimum energy consumption. Kim design philosophy emphasizes the creation of lighting effects and the harmony of fixture aesthetics with the surrounding landscape. FINISHING Eight-Stage Powder Coat (Aluminum Fixtures) All Kim aluminum fixtures are finished with an eight-stage powder coat paint process. The key element of this finish is the Titanated Zirconium conversion coating, known as the best preparation for paint adhesion and corrosion resistance. This same pretreatment is used by the automotive industry. Components in direct contact with soil or water are provided additional corrosion protection by clear anodizing prior to Titanated Zirconium conversion coating. Following the pretreatment process, a Super TGIC powder coat is applied to all fixture surfaces. Super TGIC powder is specially formulated to be both mechanically durable and fade resistant. Hand-Applied Verde (Brass, Copper, and Bronze Fixtures) The formula and application procedure for Kim s acid etched verde green patina was developed by the founder of Kim Lighting seven decades ago. The proprietary finish is hand applied to selected copper and bronze fixtures to simulate the natural patina that develops on these materials after years of exposure to sun and moisture. Hand application assures a uniform appearance. 1 1 A Note About Verde Patina Finishes The Kim verde finish is an accelerated aging process duplicating the natural verde that forms on copper and bronze after extended exposure to outside air and humidity. Like natural verde, Kim verde is not permanent and will undergo considerable change depending on location and environment. Verde can be worn away by rain, sprinklers, or surrounding wind-blown foliage. New verde will eventually form depending on humidity levels and the presence of airborne salts. Natural Weathering of Brass, Copper, and Bronze When exposed to the normal humidity and particulate matter in outside air, fixtures composed of natural, unfinished brass, copper, or bronze will rapidly age to a rich bronze color, and may develop areas of verde patina. In general, patina forms best when the fixture is exposed to high humidity, frequent wetting and drying, or when airborne salts are present. KIM LIGHTING 3

6 12 Volt Product Style Index See pages 6-7 for product index by application. NEW NEW NEW NEW NEW NEW KLV715 (Brass) pg 12 KLV710 (Alum.) pg 12 20W - 50W MR16 Halogen KLV725 (Brass) pg 14 KLV720 (Alum.) pg 14 20W - 75W MR16 Halogen KLV205 (Alum.) pg 24 20W - 75W MR16 Halogen KLV200 (Alum.) pg 28 20W - 50W MR11 Halogen KLV201 (Alum.) pg 30 20W - 75W MR16 Halogen KLV215 (Alum.) pg 36 KLV216 (Alum.) pg 36 20W - 50W T-3/T-4 Halogen; 20W - 50W MR16 Halogen NEW NEW LTV766 (Brass) pg 42 75W MR16 Halogen KLV360 (Alum.) pg 46 20W - 75W MR16 Halogen KLV365 (Alum.) pg 46 20W - 75W MR16 Halogen KLV175 (Brass) pg 50 KLV170 (Alum.) pg 50 20W - 50W MR16 Halogen KLV275 (Brass) pg 52 KLV270 (Alum.) pg 52 20W - 50W MR16 Halogen NEW NEW KLV165 (Brass) pg 56 KLV160 (Alum.) pg 56 50W MR16 Halogen NEW KLV166 (Brass) pg 60 KLV161 (Alum.) pg 60 50W MR16 Halogen NEW KLV55 (Brass) pg 58 KLV50 (Alum.) pg 58 50W MR16 Halogen KLV179/H60 (Cop./Brs.) pg 64 KLV182/H60 (Cop./Brs.) pg 64 KLV187/H60 (Cop./Brs.) pg 64 KLV177/H60 (Alum.) pg 66 KLV180/H60 (Alum.) pg 66 KLV185/H60 (Alum.) pg 66 50W MR16 Halogen KLV179/H70 (Cop./Brs.) pg 64 KLV182/H70 (Cop./Brs.) pg 64 KLV187/H70 (Cop./Brs.) pg 64 KLV177/H70 (Alum.) pg 66 KLV180/H70 (Alum.) pg 66 KLV185/H70 (Alum.) pg 66 50W MR16 Halogen NEW KLV179/H80 (Cop./Brs.) pg 64 KLV182/H80 (Cop./Brs.) pg 64 KLV187/H80 (Cop./Brs.) pg 64 KLV177/H80 (Alum.) pg 66 KLV180/H80 (Alum.) pg 66 KLV185/H80 (Alum.) pg 66 50W MR16 Halogen KLV115 (Alum.) pg 68 25W - 50W A-19 Incand. KLV10 (Verde Cop.) pg 70 KLV12 (Nat. Cop.) pg 70 25W - 50W A-19 Incand. KLV106 (Alum.) pg 74 20W - 50W T-3/T-4 Hal. KLV101 (Alum.) pg 76 20W - 35W T-3/T-4 Hal. Transformers KLV150 (Alum.) pg 78 20W - 50W T-3/T-4 Hal. NEW KLV800 (Alum.) pg 80 50W T-3/T-4 Halogen KLV810 (Alum.) pg 81 50W T-3/T-4 Halogen LLV205 (Alum.) pg 82 20W - 35W MR16 Halogen LLV121 (Alum.) pg 83 50W T-4 Halogen ABOVE GRADE pg 88 KLV W KLV W KLV W KLV W IN-GRADE pg 89 KLV W (120V) KLV W (277V) KLV W (120V) KLV W (277V) Mounting Options, Connectors and Cables NEW 12V Mounting Options, Connectors and Cables (except for KLV405) are included in Kim Lighting s KimNOW! 5-Day Shipping Program. EP17 pg 86 Landscape Light Post KLV400 pg 86 Spear Mount KLV405 pg 87 Surface Mount KLV415 pg 87 Extension Module KLV427 pg 90 #12-2 Cable KLV432 pg 90 #8-2 Cable KLV410 pg 90 Sealed Connectors 4 KIM LIGHTING The selected models are a part of Kim Lighting s KimNOW! 5-Day Shipping Program. For program details or to locate a sales representative/landscape lighting distributor in your area, log onto

7 120 Volt Product Style Index See pages 6-7 for product index by application. NEW NEW NEW C725 (Brass) pg 14 EL720 (Alum.) pg 14 35W - 50W PAR20 Hal. C735 (Brass) pg 16 EL730 (Alum.) pg 16 50W - 75W PAR30 Hal. C736 (Brass) pg 16 EL731 (Alum.) pg 16 6 Emitters LED 6W C745 (Brass) pg 18 EL740 (Alum.) pg 18 45W - 150W PAR38 Incand./Hal. C24 (Copper) pg W R40 Incand.; 150W PAR38 Incand./Hal. EL205 (Alum.) pg 24 50W PAR20 Hal.; 50W R20 Incand. NEW NEW NEW NEW EL210 (Alum.) pg W PAR38 Incand./Hal. C14 (Nat. Cop.) pg 32 C15 (Verde Cop.) pg 32 EL235 (Alum.) pg 32 50W PAR20 Hal.; 50W R20 Incand. EL220 (Alum.) pg W PAR38 Inc./Hal.; 150W R40 Incand. EL215 (Alum.) pg 36 50W - 100W T-3/T-4 Mini-can Hal (Alum.) pg (Alum.) pg (Alum.) pg 38 T-5 and T-8 Fluor (Alum.) pg (Alum.) pg W A-21 Incand.; 9W Twin Tube Fluor. NEW NEW NEW C54 (Copper) pg W R40 Incand.; 150W PAR38 Incand./Hal. LTV761 (Brass) pg 44 LTV764 (Brass) pg 44 LTV767 (Brass) pg 44 50W PAR20 Halogen; 50W MR16 Halogen; 6 Emitters LED 6W BN175 (Brass) pg 50 EL170 (Alum.) pg 50 20W - 50W MR16 Hal. BN275 (Brass) pg 52 EL270 (Alum.) pg 52 20W - 50W MR16 Hal. BN165 (Brass) pg 56 EL160 (Alum.) pg 56 50W PAR20 Halogen; 60W A-19 Incand. BN166 (Brass) pg 60 EL161 (Alum.) pg 60 50W PAR20 Halogen; 60W A-19 Incand. AN55 (Brass) pg 58 AN50 (Alum.) pg 58 50W PAR20 Halogen; 60W A-19 Incand. NEW NEW NEW NEW NEW BN179/H60 (Cop./Brs.) pg 64 BN182/H60 (Cop./Brs.) pg 64 BN187/H60 (Cop./Brs.) pg 64 EL177/H60 (Alum.) pg 66 EL180/H60 (Alum.) pg 66 EL185/H60 (Alum.) pg 66 60W A-19 Incandescent BN179/H70 (Cop./Brs.) pg 64 BN182/H70 (Cop./Brs.) pg 64 BN187/H70 (Cop./Brs.) pg 64 EL177/H70 (Alum.) pg 66 EL180/H70 (Alum.) pg 66 EL185/H70 (Alum.) pg 66 60W A-19 Incandescent BN179/H80 (Cop./Brs.) pg 64 BN182/H80 (Cop./Brs.) pg 64 BN187/H80 (Cop./Brs.) pg 64 EL177/H80 (Alum.) pg 66 EL180/H80 (Alum.) pg 66 EL185/H80 (Alum.) pg 66 60W A-19 Incandescent EL115 (Alum.) pg 68 EL116 (Alum.) pg 68 40W A-19 Incand. BN10 (Verde Cop.) pg 70 BR12 (Nat. Cop.) pg 70 40W A-19 Incand. NEW NEW NEW AN30 (Verde Cop.) pg 71 AR32 (Nat. Cop.) pg 71 60W A-19 Incand. EL120 (Alum.) pg 72 EL121 (Alum.) pg W A-21 Incand.; 75W A-19 Incand. EL105 (Alum.) pg 74 EL106 (Alum.) pg 74 75W A-19 Incand.; 100W A-21 Incand. EL150 (Alum.) pg 78 20W - 50W T-3/T-4 Hal. EL800 (Alum.) pg 80 EL805 (Alum.) pg 80 EL806 (Alum.) pg 80 50W T-3/T-4 Halogen; 9W Twin Tube Fluor. EL810 (Alum.) pg 81 EL815 (Alum.) pg 81 EL816 (Alum.) pg 81 50W T-3/T-4 Halogen; 13W Quad Tube Fluor. Mounting Options NEW 120V Mounting Options (except for SM18) are included in Kim Lighting s KimNOW! 5-Day Shipping Program. *EP17 pg 94 Landscape Light Post * JB1 pg 94 J-25N pg 94 * JBR pg 95 * SM18 pg 96 * J-27N pg 96 * JW pg 96 Architectural Portable Spear JBR30 pg 95 Stanchion Mount Surface Mount * JWBR pg 96 Junction Box Mount w/cord JBR32 pg 95 Brass In-grade Architectural Wall Mount Junction Box * NOTE: These mounting options may also be used to hard mount low voltage fixtures. (Does not apply to J-25N or JBR32.) The selected models are a part of Kim Lighting s KimNOW! 5-Day Shipping Program. For program details or to locate a sales representative/landscape lighting distributor in your area, log onto KIM LIGHTING 5

8 Product Index by Application UPLIGHTING FOR DIRECTIONAL VIEWING Above-grade accent lights are the logical choice when the lighted object can be viewed from one direction only. To prevent direct glare, fixtures are aimed away from observers. Place the accent lights behind shrubs to keep a natural looking landscape. VIEW RECOMMENDED KIM FIXTURES: 12 VOLT 120 VOLT KLV715 p. 12 KLV215 p. 38 C725 p. 14 EL210 p. 26 KLV710 p. 12 KLV216 p. 38 EL720 p. 14 C14/C15 p. 32 KLV725 p. 14 KLV175 p. 52 C735 p. 16 EL235 p. 32 KLV720 p. 14 KLV170 p. 52 EL730 p. 16 EL220 p. 34 KLV205 p. 24 KLV275 p. 54 C736 p. 16 EL215 p. 36 KLV210 p. 26 KLV270 p. 54 EL731 p. 16 BN175 p. 50 KLV200 p. 28 LLV205 p. 82 C745 p. 18 EL170 p. 50 KLV201 p. 30 EL740 p. 18 BN275 p. 52 C24 p. 22 EL270 p. 52 EL205 p. 24 DOWNLIGHTING For outdoor activity areas, fixtures placed above eye level provide efficient lighting for recreation, safety and security. Overlapping light patterns will soften shadows and create better uniformity. Mount fixtures to patios, gazebos, facades, eaves or trees. RECOMMENDED KIM FIXTURES: 12 VOLT 120 VOLT KLV715 p. 12 KLV216 p. 36 C725 p. 14 EL235 p. 32 KLV710 p. 12 KLV275 p. 52 EL720 p. 14 EL220 p. 34 KLV205 p. 24 KLV270 p. 52 C735 p. 16 EL215 p. 36 KLV210 p. 26 KLV55 p. 58 EL730 p. 16 BN275 p. 52 KLV200 p. 28 KLV50 p. 58 C745 p. 18 EL270 p. 52 KLV201 p. 30 EL740 p. 18 AN55 p. 58 KLV215 p. 36 C24 p. 22 AN50 p. 58 EL205 p. 24 AN30 p. 71 EL210 p. 26 AR32 p. 71 C14/C15 p. 32 MOONLIGHTING The effect of moonlight filtering through trees is another pleasing and functional outdoor lighting technique. Both up and down lighting is used to create this effect. With fixtures properly placed in trees, both the trees and ground are beautifully illuminated. Ground lighting provides security, and is accented by shadows from leaves and branches. RECOMMENDED KIM FIXTURES: 12 VOLT 120 VOLT KLV715 p. 12 KLV210 p. 26 C725 p. 14 C24 p. 22 KLV710 p. 12 KLV200 p. 28 EL720 p. 14 EL205 p. 24 KLV725 p. 14 KLV201 p. 30 C735 p. 16 EL210 p. 26 KLV720 p. 14 KLV216 p. 36 EL730 p. 16 C14/C15 p. 32 KLV205 p. 24 C736 p. 16 EL235 p. 32 EL731 p. 16 EL220 p. 34 C745 p. 18 AN30 p. 71 EL740 p. 18 AR32 p. 71 SPOTLIGHTING Special objects and architectural elements should be accented with fixtures that have good lamp shielding. Mounting overhead on eaves or patio structures minimizes glare. Grade mounted fixtures should be concealed with landscaping. RECOMMENDED KIM FIXTURES: 12 VOLT 120 VOLT KLV715 p. 12 KLV216 p. 36 C725 p. 14 EL205 p. 24 KLV725 p. 14 KLV275 p. 52 EL720 p. 14 EL210 p. 26 KLV720 p. 14 KLV270 p. 52 C735 p. 16 C14/C15 p. 32 KLV205 p. 24 KLV55 p. 58 EL730 p. 16 EL235 p. 32 KLV200 p. 28 KLV50 p. 58 C736 p. 16 EL220 p. 34 KLV201 p. 30 EL731 p. 16 BN275 p. 52 C745 p. 18 EL270 p. 52 EL740 p. 18 AN55 p. 58 C24 p. 22 AN50 p KIM LIGHTING

9 Product Index by Application WALL WASH, SIGN, AND SILHOUETTE Trees and shrubs with interesting branch structure are dramatic when silhouetted against a wall or building facade. This combination of landscape and facade lighting provides additional security near the building. Walls and signs need a uniform wash of light as provided by the recommended Kim fixtures. VIEW RECOMMENDED KIM FIXTURES: KLV725 p. 14 KLV720 p. 14 KLV215 p. 36 KLV216 p. 36 LTV766 p. 42 KLV360 p. 46 KLV365 p VOLT EL215 p p p p. 38 LTV761 p. 44 LTV764 p VOLT IN-GRADE UPLIGHTING FOR ALL-AROUND VIEWING In-grade fixtures are the ideal solution when the lighted object can be viewed from any direction. These fixtures can be louvered or shielded to further reduce the potential for glare. RECOMMENDED KIM FIXTURES: LTV766 p. 42 KLV360 p. 46 KLV365 p VOLT LTV761 p. 44 LTV764 p VOLT PATH, AREA, AND AMBIENT WALKWAY LIGHTING Fully shielded path lights produce the best visibility by eliminating glare that could cause difficulty in recognizing obstacles or steps. Partially shielded path lights create a useful effect when placed within taller planting, which filters the light on the pathway, reduces glare, and illuminates the adjacent landscape. RECOMMENDED KIM FIXTURES: 12 VOLT 120 VOLT BN175 p. 50 EL116 p.68 KLV175 p. 50 KLV115 p. 68 KLV170 p. 50 KLV10 p. 70 KLV165 p. 56 KLV12 p. 70 KLV160 p. 56 KLV106 p. 74 KLV179 p. 64 KLV101 p. 76 KLV182 p. 64 KLV150 p. 78 KLV187 p. 64 LLV121 p. 83 KLV177 p. 66 KLV180 p. 66 KLV185 p. 66 EL170 p. 50 EL115 p. 68 BN165 p. 56 BN10 p. 70 EL160 p. 56 BR12 p. 70 BN179 p. 64 EL120 p. 72 BN182 p. 64 EL121 p. 72 BN187 p. 64 EL105 p. 74 EL177 p. 66 EL106 p. 74 EL180 p. 66 EL150 p. 78 EL185 p. 66 PATH, AREA, AND DIRECTIONAL WALKWAY LIGHTING Directional path lights produce dramatic highlighting and accent on walks and landscape perimeters. The more tightly controlled light distribution can produce pools of illumination, like lighted stepping stones, or overlapping pools to produce high levels of visibility. RECOMMENDED KIM FIXTURES: 12 VOLT 120 VOLT KLV175 p. 50 KLV10 p p. 40 BN10 p. 70 KLV170 p. 50 KLV12 p p. 40 BR12 p. 70 KLV165 p. 56 KLV800 p. 80 BN175 p. 50 EL800 p. 80 KLV160 p. 56 KLV810 p. 81 EL170 p. 50 EL805 p. 80 KLV166 p. 60 BN165 p. 56 EL810 p. 81 KLV161 p. 60 EL160 p. 56 EL815 p. 81 BN166 p. 60 EL161 p. 60 KIM LIGHTING 7

10 Scarab J" Stainless Steel fasteners used throughout to provide easy lamp access through years of service. Black oxide finish. Integrated die-cast hood creates a rigid lens ring for superior gasket integrity, while providing a rugged glare shield. Die-cast lamp housing provides rigid base for gasketing and lens mount. Nickel plated medium base screw shell and high quality electrical components provide reliable performance. Silicone seal and four fasteners between the lamp housing and swivel body insure a leak-free assembly. J" Stainless Steel knuckle screw provides a solid connection between the die-cast socket shell and swivel mount. Black oxide finish. Fine locking teeth provide a wide range of vertical aiming with a positive lock that won t slip or break away. Integral gasket seals knuckle. Molded Tempered glass lens with continuous silicone gasket provides superior sealing. Stainless Steel set screw positively locks the swivel to assure horizontal aiming is maintained. Silicone O-ring gasket seals the base swivel to prevent moisture penetration into electrical junction box and socket housing. Unique swivel mount allows fixture to be rotated horizontally without affecting the threaded mount to the electrical box cover or mounting option. This assures a weather tight seal and positive aiming that won t slip or move after setting. Die-cast throughout for precise durability and great looks. Die-casting produces the most accurate components and tightest fitment between gaskets and mating surfaces. Die-casting also produces fine production of great looking detail. The Scarab Series utilizes a modular design with a unified appearance between several different lamp options. In aluminum or brass, the Scarab Series is as durable as it is attractive. 8 KIM LIGHTING

11 Scarab Exceptional Adaptability Accent Lighting for Landscape and Architecture presents many opportunities and challenges. It can produce visual impact, impart drama, and provide a sense of security. However, concealing the fixtures and eliminating glare can be difficult. Products in several styles are often combined, creating a daytime eyesore of mixed luminaire shapes and detailing that is distracting and often requires different maintenance activities for each fixture type. The Scarab Series combines integrated design and application flexibility to produce a landscape accent system that meets the broadest range of illumination needs. Based on more than 70 years of experience in landscape accent lighting, Kim s Scarab Series presents a uniquely classic style, combined with a wide range of lamping options, to produce a single package solution. The Scarab Series is a feature rich collection, rendered in both Brass and Aluminum. The unique swivel mount provides superior aiming without loosening over time. Die-cast construction produces accurate and finely detailed components with a quality feel unattainable with other fabrication methods. While Aluminum provides excellent value and rugged service, Brass offers the longest lasting product with the added bonus of natural weathering that blends into the landscape surround. Capable of performing so many different lighting duties, the Scarab Series may well be the only luminaires needed. The frustration of mixing and matching products to attain desired results is eliminated, as the Scarab satisfies diverse accent requirements in a uniform styling package. Shown on left, is powder-coat aluminum finishes in Black (BL), and Verde Green (GR). KIM LIGHTING 9

12 Scarab Lamp Mode Die-Cast Aluminum Die-Cast Brass MR16 12 Volt Halogen 20W to 50W Narrow Spot Narrow Flood Flood Wide Flood KLV710 Shown in DB (Dark Bronze) KLV715 Shown in NB (Natural Brass) KLV720 NEW Shown in BL (Black) KLV725 NEW Shown in VG (Verde Green Patina) PAR Volt Halogen 35W to 50W Narrow Spot Narrow Flood Wide Flood EL720 Shown in BL (Black) C725 Shown in VG (Verde Green Patina) PAR Volt Halogen 50W to 75W Narrow Spot Narrow Flood Flood EL730 Shown in GR (Verde Green) C735 Shown in NB (Natural Brass) LED* 120 Volt LED 6 emitters 6W EL731 NEW Shown in GR (Verde Green) C736 NEW Shown in NB (Natural Brass) PAR Volt Halogen 45W to 150W Narrow Spot Narrow Flood Flood Wide Flood EL740 Shown in DB (Dark Bronze) C745 Shown in VG (Verde Green Patina) HID AVAILABLE Scarab is also available in a full range of HID lampings. See the Kim HID Landscape Catalog for complete details. *See page 117 for additional LED model selections. 10 KIM LIGHTING FINISHES BL DB GR NB VG

13 System Options / Mounting Options 12 VOLT KLV710 KLV715 FGS71 1 Full Glare Shield See page 13 EP17 PowerPost See page 86 KLV400 Spear Mount See page 86 KLV405 Surface Mount See page 87 KLV415 Extension Module See page 87 AGS71 1 Adjustable Glare Shield See page 13 KLV720 KLV725 NEW FGS72 1 Full Glare Shield See page 15 AGS72 1 Adjustable Glare Shield See page 15 Above Grade Transformers See page 88 In-grade Transformers See page VOLT EL720 C725 FGS72 1 Full Glare Shield See page 15 AGS72 1 Adjustable Glare Shield See page 15 JB1* Architectural Junction Box See page 94 EP17 Landscape Light Post See page 94 EL730 C735 EL731 LED C736 LED NEW EL740 C745 FGS73 1 Full Glare Shield See page 17 AGS73 1 Adjustable Glare Shield See page 17 FGS74 1 Full Glare Shield See page 19 AGS74 1 Adjustable Glare Shield See page 19 JBR-2*, 3*, 21*, 24* Brass In-grade Junction Box See page 95 SM18* Stanchion Mount See page 96 J-27N* Surface Mount See page 96 1 Specify Finish Aluminum Finishes Black BL Dark Bronze DB Verde Green GR Brass Finishes Natural Brass NB Verde Green Patina VG J-25N Portable Spear Mount See page 94 JBR30*, JBR32 Brass In-grade Staked Junction Box See page 95 JW*, JWBR* Architectural Wall Mount See page 96 * NOTE: These mounting options may also be used to hard mount the KLV710 and KLV715 low voltage fixtures. KIM LIGHTING 11

14 Scarab Accent Lighting Die-Cast Brass Die-Cast Aluminum KLV715 KLV710 DIE-CAST BRASS SPECIFICATIONS Housing: Die-cast brass body and socket enclosure. Swivel: Die-cast brass with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Lens Frame: Integral die-cast brass lens ring and glare shield. Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward. Gasketing: Silicone gaskets used throughout. Socket: G4 to GY6.35 socket for bipin lamp. Wiring: 6' No Volt cable with spade connectors for low voltage cable system connection. Finish: Natural Brass (NB) and Verde Green Patina (VG). See page 3. Certification: UL Listed to U.S. and Canadian safety standards for wet locations. DIE-CAST ALUMINUM SPECIFICATIONS Housing: Die-cast aluminum body and socket enclosure. Swivel: Die-cast aluminum with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Clear anodized prior to Titanated Zirconium conversion coating for added corrosion resistance. Lens Frame: Integral die-cast aluminum lens ring and glare shield. Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward. Gasketing: Silicone gaskets used throughout. Socket: G4 to GY6.35 socket for bipin lamp. Wiring: 6' No Volt cable with spade connectors for low voltage cable system connection. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 12 KIM LIGHTING

15 12 Volt MR16 Halogen 5B" 3C" 4E"r. 2B" K" NPT FIXTURE OPTIONS (Ordered separately from fixture) Cat. No. Description See page HL71 1 Hex Cell Louver 21 Provides additional brightness control. PL71 1 Prismatic Lens 21 Prismatic spread lens softens lamp distribution. Best with flood lamps. SL71 1 Spread Lens 21 Linear spread lens creates an oval beam pattern. Best with spot lamps. AGS71 2 Adjustable Glare Shield 20 (Finish to match fixture) FGS71 2 Full Glare Shield 20 (Finish to match fixture) DS71 Debris Screen 20 For Full Glare Shield 1 Inserts behind lens into existing lens gasket. 2 Replaces standard lens ring/hood on fixture. ORDERING INFORMATION Cat. No.* Construction Wattage / Lamp KLV715NB Brass 20W - 50W KLV715VG Brass MR16 Bipin Halogen KLV710BL Aluminum KLV710DB Aluminum KLV710GR Aluminum PHOTOMETRIC DATA See page 99 *Remote transformer required. MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 86 KLV400 Spear Mount 86 KLV405 Surface Mount 87 KLV415 Extension Module 87 See Option pages for complete ordering information and finishes available. U.S. PATENT D424,731 Aluminum Finishes Brass Finishes Black BL Natural Brass NB Dark Bronze DB Verde Green Patina VG Verde Green GR KIM LIGHTING 13

16 Scarab Accent Lighting Die-Cast Brass Die-Cast Aluminum C725 KLV725 EL720 KLV720 DIE-CAST BRASS SPECIFICATIONS Housing: Die-cast brass body, lamp housing and socket enclosure. Swivel: Die-cast brass with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Lens Frame: Integral die-cast brass lens ring and glare shield. Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward. Gasketing: Silicone gaskets used throughout. Socket: Nickel plated brass/porcelain socket. 4KV pulse rated. Wiring: No. 18AWM rated 105 C. Finish: Natural Brass (NB) and Verde Green Patina (VG). See page 3. Certification: UL Listed to U.S. and Canadian safety standards for wet locations. DIE-CAST ALUMINUM SPECIFICATIONS Housing: Die-cast aluminum body, lamp housing and socket enclosure. Swivel: Die-cast aluminum with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Clear anodized prior to Titanated Zirconium conversion coating for added corrosion resistance. Lens Frame: Integral die-cast aluminum lens ring and glare shield. Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward. Gasketing: Silicone gaskets used throughout. Socket: Nickel plated brass/porcelain socket. 4KV pulse rated. Wiring: No. 18AWM rated 105 C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 14 KIM LIGHTING

17 12 Volt NEW MR16 Halogen 120 Volt PAR20 Halogen 4K" 3D" 7K" K" NPT 2B" 6D"r. FIXTURE OPTIONS (Ordered separately from fixture) Cat. No. Description See page HL72 1 Hex Cell Louver 21 Provides additional brightness control. PL72 1 Prismatic Lens 21 Prismatic spread lens softens lamp distribution. Best with flood lamps. SL72 1 Spread Lens 21 Linear spread lens creates an oval beam pattern. Best with spot lamps. AGS72 2 Adjustable Glare Shield 20 (Finish to match fixture) FGS72 2 Full Glare Shield 20 (Finish to match fixture) DS72 Debris Screen 20 For Full Glare Shield. 1 Inserts behind lens into existing lens gasket. 2 Replaces standard lens ring/hood on fixture. ORDERING INFORMATION 12 Volt Cat. No.* Construction Wattage / Lamp KLV725NB NEW Brass 20W - 75W KLV725VG Brass MR16 Bipin Halogen 120 Volt Cat. No. Construction Wattage / Lamp C725NB Brass 35W - 50W C725VG Brass PAR20 Halogen 12 Volt Cat. No.* Construction Wattage / Lamp KLV720BL NEW Aluminum 20W - 75W KLV720DB Aluminum MR16 Bipin KLV720GR Aluminum Halogen 120 Volt Cat. No. Construction Wattage / Lamp EL720BL Aluminum 35W - 50W EL720DB Aluminum PAR20 EL720GR Aluminum Halogen PHOTOMETRIC DATA See pages 99 and 104 *Remote transformer required. U.S. PATENT D424,731 Aluminum Finishes Brass Finishes Black BL Natural Brass NB Dark Bronze DB Verde Green Patina VG Verde Green GR 12 VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 86 KLV400 Spear Mount 86 KLV405 Surface Mount 87 KLV415 Extension Module VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 94 JB1 Architectural J-Box 94 J-25N Portable Spear Mount 94 JBR-2 thru 24 In-grade J-Box 95 JBR30, JBR32 Staked In-grade J-Box 95 SM18 Stanchion Mount 96 J-27N Surface Mount 96 JW Architectural Wall Mount 96 See Option pages for complete ordering information and finishes available. Also available in HID lamping. See Kim HID Landscape Catalog. Also available in LED light sources. See page 117 for model selection. KIM LIGHTING 15

18 Scarab Accent Lighting Die-Cast Brass Die-Cast Aluminum C735 C736 EL730 EL731 DIE-CAST BRASS SPECIFICATIONS Housing: Die-cast brass body, lamp housing and socket enclosure. Swivel: Die-cast brass with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Lens Frame: Integral die-cast brass lens ring and glare shield. Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward. Gasketing: Silicone gaskets used throughout. Socket: Nickel plated brass/porcelain socket. 4KV pulse rated. Wiring: No. 18AWM rated 105 C. Finish: Natural Brass (NB) and Verde Green Patina (VG). See page 3. Certification: UL Listed to U.S. and Canadian safety standards for wet locations. DIE-CAST ALUMINUM SPECIFICATIONS Housing: Die-cast aluminum body, lamp housing and socket enclosure. Swivel: Die-cast aluminum with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Clear anodized prior to Titanated Zirconium conversion coating for added corrosion resistance. Lens Frame: Integral die-cast aluminum lens ring and glare shield. Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward. Gasketing: Silicone gaskets used throughout. Socket: Nickel plated brass/porcelain socket. 4KV pulse rated. Wiring: No. 18AWM rated 105 C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 16 KIM LIGHTING

19 NEW LED 120 Volt PAR30 Halogen 6 Emitters LED 6 Watt 5B" 4M" 9" K" NPT 2B" 8"r. FIXTURE OPTIONS (Ordered separately from fixture) Cat. No. Description See page HL73 1 Hex Cell Louver 21 Provides additional brightness control. PL73 1 Prismatic Lens 21 Prismatic spread lens softens lamp distribution. Best with flood lamps. SL73 1 Spread Lens 21 Linear spread lens creates an oval beam pattern. Best with spot lamps. AGS73 2 Adjustable Glare Shield 20 (Finish to match fixture) FGS73 2 Full Glare Shield 20 (Finish to match fixture) DS73 Debris Screen 20 For Full Glare Shield 1 Inserts behind lens into existing lens gasket. 2 Replaces standard lens ring/hood on fixture. ORDERING INFORMATION Cat. No. Construction Wattage / Lamp C735NB Brass 50W - 75W C735VG Brass PAR30 Halogen C736/6L3K120NB 3 Brass 6 Emitter LED C736/6L3K120VG 3 NEW Brass Circular Array 7.2W EL730BL Aluminum 50W - 75W EL730DB Aluminum PAR30 EL730GR Aluminum Halogen EL731SP/6L3K120BL 3 Aluminum 6 Emitter LED EL731/6L3K120DB 3 Aluminum Circular Array EL731/6L3K120GR 3 Aluminum 7.2W NEW PHOTOMETRIC DATA See page 104 MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 94 JB1 Architectural J-Box 94 J-25N Portable Spear Mount 94 JBR-2 thru 24 In-grade J-Box 95 JBR30, JBR32 Staked In-grade J-Box 95 SM18 Stanchion Mount 96 J-27N Surface Mount 96 JWBR Brass Architectural Wall Mount 96 See Option pages for complete ordering information and finishes available. Also available in HID lamping. See Kim HID Landscape Catalog. See page 117 for additional LED model selections. U.S. PATENT D424, K = 3500K color temperature. Also available in 5K, 5100K color temperature. Aluminum Finishes Brass Finishes Black BL Natural Brass NB Dark Bronze DB Verde Green Patina VG Verde Green GR KIM LIGHTING 17

20 Scarab Accent Lighting Die-Cast Brass Die-Cast Aluminum C745 EL740 DIE-CAST BRASS SPECIFICATIONS Housing: Die-cast brass body, lamp housing and socket enclosure. Swivel: Die-cast brass with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Lens Frame: Integral die-cast brass lens ring and glare shield. Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward. Gasketing: Silicone gaskets used throughout. Socket: Nickel plated brass/porcelain socket. 4KV pulse rated. Wiring: No. 18AWM rated 105 C. Finish: Natural Brass (NB) and Verde Green Patina (VG). See page 3. Certification: UL Listed to U.S. and Canadian safety standards for wet locations. DIE-CAST ALUMINUM SPECIFICATIONS Housing: Die-cast aluminum body, lamp housing and socket enclosure. Swivel: Die-cast aluminum with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Clear anodized prior to Titanated Zirconium conversion coating for added corrosion resistance. Lens Frame: Integral die-cast aluminum lens ring and glare shield. Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward. Gasketing: Silicone gaskets used throughout. Socket: Nickel plated brass/porcelain socket. 4KV pulse rated. Wiring: No. 18AWM rated 105 C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 18 KIM LIGHTING

21 PAR Volt Incandescent / Halogen 6K" 5D" 10M" K" NPT 2B" 9K"r. FIXTURE OPTIONS (Ordered separately from fixture) Cat. No. Description See page HL74 1 Hex Cell Louver 21 Provides additional brightness control. PL74 1 Prismatic Lens 21 Prismatic spread lens softens lamp distribution. Best with flood lamps. SL74 1 Spread Lens 21 Linear spread lens creates an oval beam pattern. Best with spot lamps. AGS74 2 Adjustable Glare Shield 20 (Finish to match fixture) FGS74 2 Full Glare Shield 20 (Finish to match fixture) DS74 Debris Screen 20 For Full Glare Shield only. 1 Inserts behind lens into existing lens gasket. 2 Replaces standard lens ring/hood on fixture. ORDERING INFORMATION Cat. No. Construction Wattage / Lamp C745NB Brass 45W - 150W C745VG Brass PAR38 Incand. / Halogen EL740BL Aluminum EL740DB Aluminum EL740GR Aluminum PHOTOMETRIC DATA See page 104 U.S. PATENT D424,731 MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 94 JB1 Architectural J-Box 94 J-25N Portable Spear Mount 94 JBR-2 thru 24 In-grade J-Box 95 JBR30, JBR32 Staked In-grade J-Box 95 SM18 Stanchion Mount 96 J-27N Surface Mount 96 JWBR Brass Architectural Wall Mount 96 See Option pages for complete ordering information and finishes available. Also available in HID lamping. See Kim HID Landscape Catalog. Aluminum Finishes Brass Finishes Black BL Natural Brass NB Dark Bronze DB Verde Green Patina VG Verde Green GR KIM LIGHTING 19

22 Scarab Options Adjustable Glare Shield Full Glare Shield ALUMINUM SPECIFICATIONS Adjustable Glare Shield: Spun aluminum shield with 45 cut and drain hole. Includes die-cast low copper (< 0.6%) aluminum lens ring. The shield is rotatable 360. Full Glare Shield: Spun aluminum shield with drain hole. Includes die-cast low copper aluminum lens ring. Finish: Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Debris Screen: Stainless steel wire screen welded to flange, and held in place with spring clips. Screen inserts inside Full Glare Shield only. All Debris Screens are black iridite colored. COPPER SPECIFICATIONS Adjustable Glare Shield: Spun copper shield with 45 cut and drain hole. Includes die-cast brass lens ring. The shield is rotatable 360. Full Glare Shield: Spun copper shield with drain hole. Includes die-cast brass lens ring. Finish: Standard finishes are Natural Copper and Brass (NB) and Verde Green Patina (VG). Debris Screen: Stainless steel wire screen welded to flange, and held in place with spring clips. Screen inserts inside Full Glare Shield only. All Debris Screens are black iridite colored. ORDERING INFORMATION Scarab No. Construction Adjustable Glare Shield 1 Full Glare Shield 1 Debris Screen KLV715 Brass AGS71NB 2K" FGS71NB 3" AGS71VG 2A" FGS71VG DIA. 2" DIA. Aluminum AGS71BL FGS71BL DS71 AGS71DB FGS71DB 33.6 cutoff Full Glare Shield only. AGS71GR FGS71GR 12V MR16 Series KLV710 C725 KLV725 EL720 KLV720 C735 C736 EL730 EL731 C745 EL740 Brass Aluminum Brass Aluminum Brass Aluminum AGS72NB AGS72VG AGS72BL AGS72DB AGS72GR AGS73NB AGS73VG AGS73BL AGS73DB AGS73GR AGS74NB AGS74VG AGS74BL AGS74DB AGS74GR 3N" DIA. 4F" DIA. 5H" DIA. 4M" 5A" 6L" 1 Glare Shields replace standard lens ring/hood on fixtures. FGS72NB FGS72VG FGS72BL FGS72DB FGS72GR FGS73NB FGS73VG FGS73BL FGS73DB FGS73GR FGS74NB FGS74VG FGS74BL FGS74DB FGS74GR 4A" DIA. 5N" DIA. 3G" DIA. 6D" 8L" 5D" 31 cutoff 31.5 cutoff 32 cutoff DS72 Full Glare Shield only. PAR20 Series DS73 Full Glare Shield only. PAR30 Series DS74 Full Glare Shield only. PAR38 Series 20 KIM LIGHTING

23 HEX CELL LOUVERS Constructed of hex cell aluminum louvers providing 45 cutoff, mounted in a circular frame, finished in baked high-heat flat black. Can be used in combination with colored lenses. Inserts behind lens into lens gasket. Cannot be used in combination with SL - Spread or PL - Prismatic Lenses. ORDERING INFORMATION HL71 12V MR16 Series HL72 PAR20 Series HL73 PAR30 Series HL74 PAR38 Series LENS ACCESSORIES PL - PRISMATIC LENS Raw flood lamp distribution Softens lamp distribution and flattens beam spread. Best with flood lamps. Inserts behind lens into lens gasket. Cannot be used in combination with HL series Hex Cell Louvers. ORDERING INFORMATION Fixture Cat. No. 12V MR16 Series PL71 PAR20 Series PL72 PAR30 Series PL73 PAR38 Series PL74 PL SL - SPREAD LENS Raw spot lamp distribution Creates an oval beam pattern, more narrow in one beam axis. Best with spot lamps. Inserts behind lens into lens gasket. Cannot be used in combination with HL series Hex Cell Louvers. ORDERING INFORMATION Fixture Cat. No. 12V MR16 Series SL71 PAR20 Series SL72 PAR30 Series SL73 PAR38 Series SL74 SL KIM LIGHTING 21

24 Spun Copper Bullet Accent Lighting Copper / Brass C24 SPECIFICATIONS Housing and Shield: Spun copper with cast bronze clamping rings and swivel base. Swivel: Cast bronze with set screw lock and K" NPT plus solid brass locknut for mounting. Lens: Convex clear tempered glass with silicone gasket. Socket: Porcelain medium base. Wiring: No. 18AWM rated 105. Finish: Natural copper and bronze. Will rapidly age to a deep rich bronze color, and may develop areas of patina. See page 3. Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 22 KIM LIGHTING

25 PAR38 Incand. / Halogen 120 Volt R40 Incandescent 13J" 6K" DIA. 2B" K" NPT ORDERING INFORMATION Cat. No. Construction Wattage / Lamp C24 Copper / Brass 150W 150W PAR38 R40 Incand. / Incand. Halogen PHOTOMETRIC DATA See page 104 MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 94 JB1 Architectural J-Box 94 J-25N Portable Spear Mount 94 JBR-2 thru 24 In-grade J-Box 95 JBR30, JBR32 Staked In-grade J-Box 95 SM18 Stanchion Mount 96 J-27N Surface Mount 96 JWBR Brass Architectural Wall Mount 96 See Option pages for complete ordering information and finishes available. Also available in HID lamping. See Kim HID Landscape Catalog. KIM LIGHTING 23

26 Square Hood Accent Lighting Die-Cast Aluminum KLV205 EL VOLT SPECIFICATIONS Housing and Shield: Die-cast low copper aluminum. Swivel: Die-cast aluminum with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Clear anodized prior to Titanated Zirconium conversion coating for added corrosion resistance. Lens: Convex clear tempered glass with silicone gasket. Socket: G4 to GY6.35 socket for bipin lamp. Wiring: 6' No Volt cable with fork connectors. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 120 VOLT SPECIFICATIONS Housing and Shield: Die-cast low copper aluminum. Swivel: Die-cast aluminum with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Clear anodized prior to Titanated Zirconium conversion coating for added corrosion resistance. Lens: Convex clear tempered glass with silicone gasket. Socket: Porcelain medium base. Wiring: No. 18AWM rated 105 C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 24 KIM LIGHTING

27 MR16 Halogen 12 Volt PAR20 Halogen 120 Volt R20 Incandescent 6D" FIXTURE OPTIONS (Ordered separately from fixture) Cat. No. Description See page L12 Internal Louver 91 Clips onto rim of MR16 lamp and provides additional brightness control. L20 Internal Louver 91 Clips onto rim of PAR20 lamp and provides additional brightness control. 4" 2B" K" NPT L12 2B" DIA. 1" L20 2D" DIA. 1J" KLV205 ONLY EL205 ONLY ORDERING INFORMATION 12 Volt Cat. No.* Construction Wattage / Lamp KLV205BL Aluminum 20W - 75W KLV205DB Aluminum MR16 Bipin KLV205GR Aluminum Halogen 120 Volt Cat. No. Construction Wattage / Lamp EL205BL Aluminum 50W 50W EL205DB Aluminum PAR20 R20 EL205GR Aluminum Halogen Incand. PHOTOMETRIC DATA See pages 99 and 104 Aluminum Finishes Black BL Dark Bronze DB Verde Green GR *Remote transformer required. 12 VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 86 KLV400 Spear Mount 86 KLV405 Surface Mount 87 KLV415 Extension Module VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 94 JB1 Architectural J-Box 94 J-25N Portable Spear Mount 94 JBR-2 thru 24 In-grade J-Box 95 JBR30, JBR32 Staked In-grade J-Box 95 SM18 Stanchion Mount 96 J-27N Surface Mount 96 JW Architectural Wall Mount 96 See Option pages for complete ordering information and finishes available. Also available in HID lamping. See Kim HID Landscape Catalog. KIM LIGHTING 25

28 Square Hood Accent Lighting Die-Cast Aluminum EL210 SPECIFICATIONS Housing and Shield: Die-cast low copper aluminum. Swivel: Die-cast aluminum with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Clear anodized prior to Titanated Zirconium conversion coating for added corrosion resistance. Gasket: Silicone lamp gasket. Socket: Porcelain medium base. Wiring: No. 18AWM rated 105 C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 26 KIM LIGHTING

29 120 Volt PAR38 Incand. / Halogen 7L" 5D" 2B" K" NPT ORDERING INFORMATION Cat. No. Construction Wattage / Lamp EL210BL Aluminum 150W EL210DB Aluminum PAR38 EL210GR Aluminum Incand. / Halogen PHOTOMETRIC DATA See page 104 MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 94 JB1 Architectural J-Box 94 J-25N Portable Spear Mount 94 JBR-2 thru 24 In-grade J-Box 95 JBR30, JBR32 Staked In-grade J-Box 95 SM18 Stanchion Mount 96 J-27N Surface Mount 96 JW Architectural Wall Mount 96 See Option pages for complete ordering information and finishes available. Aluminum Finishes Black BL Dark Bronze DB Verde Green GR KIM LIGHTING 27

30 MR11 Accent Lighting Die-Cast Aluminum KLV200 SPECIFICATIONS Housing: Die-cast low copper aluminum. Compression Ring: Die-cast aluminum threaded to body, with silicone gasket. Black anodized finish. Swivel: Die-cast aluminum with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Clear anodized prior to Titanated Zirconium conversion coating for added corrosion resistance. Lens: Tempered glass with silicone gasket. Socket: GU4 socket for bipin lamp. Wiring: 6' No Volt cable with fork connectors. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 28 KIM LIGHTING

31 12 Volt MR11 Halogen FIXTURE OPTIONS (Ordered separately from fixture) Cat. No. Description See page PL11 1 Prismatic Lens 91 Prismatic spread lens softens lamp distribution. Best with flood lamps. SL11 1 Spread Lens 91 Linear spread lens creates an oval beam pattern. Best with spot lamps 1 Replaces standard clear lens. 5C" 2J" DIA. 2B" K" NPT ORDERING INFORMATION Cat. No.* Construction Wattage / Lamp KLV200BL Aluminum 20W - 50W KLV200DB Aluminum MR11 Bipin KLV200GR Aluminum Halogen PHOTOMETRIC DATA See page 98 *Remote transformer required. MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 86 KLV400 Spear Mount 86 KLV405 Surface Mount 87 KLV415 Extension Module 87 See Option pages for complete ordering information and finishes available. Aluminum Finishes Black BL Dark Bronze DB Verde Green GR KIM LIGHTING 29

32 MR16 Accent Lighting Die-Cast Aluminum KLV201 SPECIFICATIONS Housing: Die-cast low copper aluminum. Compression Ring: Die-cast aluminum threaded to body, with silicone gasket. Black anodized finish. Swivel: Die-cast aluminum with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Clear anodized prior to Titanated Zirconium conversion coating for added corrosion resistance. Lens: Tempered glass with silicone gasket. Socket: G4 to GY6.35 socket for bipin lamp. Wiring: 6' No Volt cable with fork connectors. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 30 KIM LIGHTING

33 12 Volt MR16 Halogen 3B" DIA. 5E" 2B" FIXTURE OPTIONS (Ordered separately from fixture) Cat. No. Description See page L12 Internal Louver 91 Clips onto rim of MR16 lamp and provides additional brightness control. PL 1 Prismatic Lens 91 Prismatic spread lens softens lamp distribution. Best with flood lamps. SL 1 Spread Lens 91 Linear spread lens creates an oval beam pattern. Best with spot lamps K" NPT 1 Inserts behind lens. 2B" DIA. L12 1" ORDERING INFORMATION Cat. No.* Construction Wattage / Lamp KLV201BL Aluminum 20W - 75W KLV201DB Aluminum MR16 Bipin KLV201GR Aluminum Halogen PHOTOMETRIC DATA See page 99 *Remote transformer required. MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 86 KLV400 Spear Mount 86 KLV405 Surface Mount 87 KLV415 Extension Module 87 See Option pages for complete ordering information and finishes available. Aluminum Finishes Black BL Dark Bronze DB Verde Green GR KIM LIGHTING 31

34 Spun Accent Lighting Spun Copper Spun Aluminum C14 C15 EL235 COPPER SPECIFICATIONS Housing and Shield: One-piece spun copper. Swivel: Cast bronze, natural finish, with K" NPT plus solid brass locknut for mounting. Lens: Convex clear tempered glass (optional). Socket: Porcelain medium base with silicone lamp gasket. Wiring: No. 18AWM rated 105 C. Finish: (C14) Natural Copper. (C15) Acid Etched Verde Green Patina. See page 3. Certification: UL Listed to U.S. and Canadian safety standards for wet locations. ALUMINUM SPECIFICATIONS Housing and Shield: One-piece spun aluminum. Swivel: Die-cast aluminum with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Clear anodized prior to Titanated Zirconium conversion coating for added corrosion resistance. Lens: Convex clear tempered glass (optional). Socket: Porcelain medium base with silicone socket gasket. Wiring: No. 18AWM rated 105 C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 32 KIM LIGHTING

35 PAR20 Halogen 120 Volt R20 Incandescent 6K" FIXTURE OPTIONS (Ordered separately from fixture) Cat. No. Description LA4 Lens and Clip Required when using R20 lamp aimed up to prevent lamp breakage by thermal shock from water. 4B" DIA. 2B" C14 / C15 K" NPT 6K" 4B" DIA. 2B" EL235 K" NPT ORDERING INFORMATION Cat. No. Construction Wattage / Lamp C14 (Natural Copper) Copper / Bronze 50W 50W C15 (Verde Copper) Copper / Bronze PAR20 R20 Halogen Incand. EL235BL Aluminum EL235DB Aluminum EL235GR Aluminum PHOTOMETRIC DATA See page 104 MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 94 JB1 Architectural J-Box 94 J-25N Portable Spear Mount 94 JBR-2 thru 24 In-grade J-Box 95 JBR30, JBR32 Staked In-grade J-Box 95 SM18 Stanchion Mount 96 J-27N Surface Mount 96 JW Architectural Wall Mount 96 JWBR Brass Architectural Wall Mount 96 See Option pages for complete ordering information and finishes available. Aluminum Finishes Black BL Dark Bronze DB Verde Green GR KIM LIGHTING 33

36 Bullet Accent Lighting Die-Cast Aluminum EL220 EL220BL with HS220BL SPECIFICATIONS Housing: Die-cast low copper aluminum. Swivel: Die-cast aluminum with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Clear anodized prior to Titanated Zirconium conversion coating for added corrosion resistance. Lens: Convex clear or colored tempered glass with clip (optional). Half Shield: Formed.06" thick aluminum fully rotatable (optional). Socket: Porcelain medium base with silicone lamp gasket. Wiring: No. 18AWM rated 105 C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 34 KIM LIGHTING

37 PAR38 Incand. / Hal. 120 Volt R40 Incand. 10J" FIXTURE OPTIONS (Ordered separately from fixture) Cat. No. Description See page LA6 Clear Lens and Clip - Required when using R40 lamp aimed up to prevent lamp breakage by thermal shock from water. DS220 Debris Shield - (Will not work with Half Shield) HS220BL Half Shield - HS220DB Provides additional glare control. HS220GR Fully rotatable 6J" DIA. 2B" 6E" K" NPT 6C" HS220 ORDERING INFORMATION Cat. No. Construction Wattage / Lamp EL220BL Aluminum 150W 150W EL220DB Aluminum PAR38 1 R40 2 EL220GR Aluminum Incand. / Incand. Halogen 1 Use of Philips lamps not recommended without LA6 lens option. 2 Do not aim down unless protected from direct water spray. PHOTOMETRIC DATA See page 104 MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 94 JB1 Architectural J-Box 94 J-25N Portable Spear Mount 94 JBR-2 thru 24 In-grade J-Box 95 JBR30, JBR32 Staked In-grade J-Box 95 SM18 Stanchion Mount 96 J-27N Surface Mount 96 JW Architectural Wall Mount 96 See Option pages for complete ordering information and finishes available. Aluminum Finishes Black BL Dark Bronze DB Verde Green GR KIM LIGHTING 35

38 Micro-Flood Accent Lighting Die-Cast Aluminum KLV215 KLV216 EL VOLT SPECIFICATIONS Housing and Lens Frame: Die-cast low copper aluminum. Swivel: Die-cast aluminum with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Clear anodized prior to Titanated Zirconium conversion coating for added corrosion resistance. Reflector: (KLV215) Hydroformed aluminum. Lens: Clear flat tempered glass with silicone gasket. Fasteners: Stainless steel. Socket: G4 to GY6.35 socket for bipin lamp. Wiring: 6' No Volt cable with fork connectors. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 120 VOLT SPECIFICATIONS Housing and Lens Frame: Die-cast low copper aluminum. Swivel: Die-cast aluminum with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Clear anodized prior to Titanated Zirconium conversion coating for added corrosion resistance. Reflector: Specular Alzak aluminum, peened. Lens: Clear flat tempered glass with silicone gasket. Fasteners: Stainless steel. Socket: Mini-can. Wiring: No. 18 SF rated 200 C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 36 KIM LIGHTING

39 12 Volt T-3 / T-4 Halogen 120 Volt MR16 Halogen 116 3" 64 3L" 5K" 4B" 6J" FIXTURE OPTIONS (Ordered separately from fixture) Cat. No. Description BD215BL Optional Barn Doors BD215DB Extruded aluminum, fully BD215GR adjustable. Provides beam and glare control. FH215BL Optional Fixed Hood FH215DB Formed.062" thick aluminum. FH215GR Provides glare control. K" NPT SIDE FRONT 2B" 1C" BD215 5K" 1L" FH215 ORDERING INFORMATION 12 Volt Cat. No.* Construction Wattage / Lamp KLV215BL Aluminum 20W - 50W KLV215DB Aluminum T-3 or T-4 Bipin KLV215GR Aluminum Halogen KLV216BL Aluminum 20W - 50W KLV216DB Aluminum MR16 Bipin KLV216GR Aluminum Halogen 120 Volt Cat. No. Construction Wattage / Lamp EL215BL Aluminum 50W - 100W EL215DB Aluminum T-3 or T-4 Mini-can EL215GR Aluminum Halogen PHOTOMETRIC DATA See pages 99, 101, and 105 U.S. PATENT D298,656 Aluminum Finishes Black BL Dark Bronze DB Verde Green GR *Remote transformer required. 12 VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 86 KLV400 Spear Mount 86 KLV405 Surface Mount 87 KLV415 Extension Module VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 94 JB1 Architectural J-Box 94 J-25N Portable Spear Mount 94 JBR-2 thru 24 In-grade J-Box 95 JBR30, JBR32 Staked In-grade J-Box 95 SM18 Stanchion Mount 96 J-27N Surface Mount 96 JW Architectural Wall Mount 96 See Option pages for complete ordering information and finishes available. Also available in LED light sources. See page 117 for model selection. KIM LIGHTING 37

40 Sign / Wall Lighter Accent Lighting Extruded Aluminum 4348 (shown) SPECIFICATIONS Housing: One-piece extruded aluminum with die-cast aluminum ends. Swivels: Two, die-cast aluminum, with locking teeth and K" solid brass NPT mount. Swivel locked by J-20 stainless set screw. Clear anodized prior to Titanated Zirconium conversion coating for added corrosion resistance. Reflector: Specular Alzak. Lens: Clear flat acrylic, fully gasketed, retained by a concealed extruded aluminum rail with recessed captive allen-head fasteners. Socket: Medium bipin mounted on reflector. Wiring: Factory prewired with No. 18AWM rated 105 C, leads extended from swivel base. Ballast: Electronic ballast 0 F starting. Variable voltage 120 thru 277. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 38 KIM LIGHTING

41 NEW 4300 Series 120 Volt T-5 / T-8 Fluorescent 49" 37" ELECTRICAL SUPPORT ONLY 12J" 24K" 9J" 10K" 4348 FRONT 4336 FRONT 25" 60 MAX. backtilt 4J" 60 MAX. backtilt 4J" 3" 6J" 12K" 4E" 7E" 4E" 7E" 4324 FRONT NOTE: Do not aim down unless protected from direct water spray. Do not exceed 60 backtilt aiming. Unwired swivel may be attached to rigid pipe of appropriate length for site soil conditions. K" NPT TYP. SIDE 2B" K" NPT TYP. SIDE WITH OPTIONAL FIXED HOOD 2B" ORDERING INFORMATION Ordering Example: 4336 / 239T5-HO / GR Fixture Lamp Finish Cat. No. Length Lamp(s) Wattage / Lamp(s) " 114T5 (1) 14 watt T-5 lamp NEW 214T5 (2) 14 watt T-5 lamps 124T5-HO (1) 24 watt T-5-HO lamp 224T5-HO (2) 24 watt T-5-HO lamps 117T8 (1) 17 watt T-8 lamp " 121T5 (1) 21 watt T-5 lamp NEW 221T5 (2) 21 watt T-5 lamps 139T5-HO (1) 39 watt T-5-HO lamp 239T5-HO (2) 39 watt T-5-HO lamps 125T8 (1) 25 watt T-8 lamp " 128T5 (1) 28 watt T-5 lamp NEW 228T5 (2) 28 watt T-5 lamps 154T5-HO (1) 54 watt T-5-HO lamp 254T5-HO (2) 54 watt T-5-HO lamps 132T8 (1) 32 watt T-8-lamp NOTE: Electronic Ballast operates 120 thru 277 volts (50-60Hz.). Electronic Ballast minimum starting temperature -20 C/0 F. Aluminum Finishes Black BL Dark Bronze DB Verde Green GR FIXTURE OPTIONS (Ordered separately from fixture) Cat. No. Description FH24 (for 4324) Optional Fixed Hood FH36 (for 4336) Formed A" thick aluminum. Can be mounted FH48 (for 4348) along the top of the fixture to shield lamp and lens from view. Mounts to predrilled holes in the fixture housing. MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 94 JB1 1 Architectural J-Box 94 J-25N 1 Portable Spear Mount 94 JBR-2 thru 24 1 In-grade J-Box 95 JBR30, JBR32 1 Staked In-grade J-Box 95 SM18 1 Stanchion Mount 96 1 Two required See Option pages for complete ordering information and finishes available. Cat. No. - Example: 4336/239T5-HO/GR/FH36 PHOTOMETRIC DATA See page 105 KIM LIGHTING 39

42 The Path-Lighter A-21 Incand. In-grade Lighting Cast Aluminum 120 Volt Compact Fluor E" DIA. 3E" x 3E" 4K" DIA. Rigid Conduit (by others) (2) K" NPT x = required depth of conduit per local codes. Fixture installed in concrete. Fixture installed in rock. SPECIFICATIONS Housing: One-piece cast aluminum, two K" NPT in bottom. Top: Cast aluminum with flush stainless steel flat slotted screws. Lens: Molded borosilicate prismatic glass with removable 180 reflector shield. Gasketing: Silicone gaskets used throughout. Socket: (3091) Porcelain medium base, (3095) G23D 2-pin base. Electrical Components: (3095) Normal power factor toroidal 25 F starting. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. ORDERING INFORMATION Cat. No. Construction Wattage / Lamp 3091BL Aluminum 100W 3091DB Aluminum A GR Aluminum Incandescent 3095BL Aluminum 9W 3095DB Aluminum Double Twin Tube 3095GR Aluminum Fluorescent PHOTOMETRIC DATA See page 108 MOUNTING INFORMATION: Clean appearance - no visible junction box. Very rigid when installed in concrete. Can be installed flush with paving surface. CAUTION: Fixture must not not contact soil or standing water. Provide drainage away from fixture. Install a barrier frame to isolate fixture and provide a trim edge for landscaping. Aluminum Finishes Black BL Dark Bronze DB Verde Green GR 40 KIM LIGHTING

43 Well Light PAR38 Incand. / Hal. In-grade Lighting Copper / Bronze 120 Volt R40 Incand. C54 16J" 9K" 3L" DIA. High Ground Cover Rock, Bark, Low Ground Cover, etc. 14E" (2) K" NPT 17" MIN. Drainage (by others) SPECIFICATIONS Housing: Spun copper, bronze clamping ring, prewired cord through brass seal. Lens: Convex tempered clear glass with silicone gasket. Socket: Porcelain medium base. Well: 9" diameter x 14L" depth direct burial PVC pipe. Louver: Cast aluminum finished black with polished edges, secured to well with socket head set screws. Junction Box: Die-cast brass, K" rigid conduit and brass seal for fixture cord, two K" NPT conduit entries in sides, one K" NPT conduit entry in bottom. 21 cu. in. volume. Certification: UL Listed to U.S. and Canadian safety standards for wet locations. PHOTOMETRIC DATA See page 104 Also available in HID lamping. See Kim HID Landscape Catalog. ORDERING INFORMATION Cat. No. Construction Wattage / Lamp C54 Copper / Bronze 150W 150W PAR38 R40 Incand. / Incand. Halogen FIXTURE OPTIONS Cat. No. Description 5090DL 1 Directional Louver 9K" square. Cast aluminum. Replaces standard full louver. Provides glare control and allows maximum light output in direction of fixture tilt 5293TG 1 Tree Grate Louver 9K" diameter x 1" deep. Gray cast iron. Replaces standard full louver. Fits any tree grate with 9K" diameter x 1" deep opening. 1 Add to fixture Cat. No. - Example: C54/5090DL 9K" 9K" DIA. NOTE: Fixture will tilt 15 within well. If greater tilt is needed, entire well can be installed at an angle. CAUTION: Not approved for walk-over areas. Conduit entries must be RTV sealed. Do not submerge. Provide drainage below well (by others) to prevent flooding. KIM LIGHTING 41

44 Minivault In-grade Lighting Die-Cast Brass LTV766 For in-grade or surface mounting. SPECIFICATIONS Lens Ring: Die-cast brass, natural finish. Five captive J" blackened stainless steel hex-socket cap screws. Lens: Clear tempered soda lime, F" thick, flush with lens ring, slightly crowned. Lens Gasket: one-piece molded silicone, U-channel wraps completely around lens flange. Housing: Heavy wall die-cast brass. Socket: G4 to GY6.35 socket for bipin lamp, mounted on yoke providing ±15 vertical adjustment and 340 rotation, locking screws, black anodized gimble ring. Cable: 6' # Volt cable with fork connector, sealed entry into body with anti-siphon plug. Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 42 KIM LIGHTING

45 12 Volt MR16 Halogen 6" DIA. Optical Adjustment " " Low Voltage Cable Exit 6J" DIA. ORDERING INFORMATION Cat. No.* Construction Wattage / Lamp LTV766 Brass 75W MR16 Bipin Halogen FIXTURE OPTIONS (Ordered separately from fixture) Cat. No. Description See page HL73 1 Hex Cell Louver 91 Provides additional brightness control. PL73 1 Prismatic Lens 91 Prismatic spread lens softens lamp distribution. Best with flood lamps. SL73 1 Spread Lens 91 Linear spread lens creates an oval beam pattern. Best with spot lamps. L12 Internal Louver 91 Clips onto rim of MR16 lamp and provides additional brightness control. HS60 2 Half Shield - For directional glare control toward the viewer. one-piece cast bronze, replaces standard lens ring. RG60 2 Rock Guard - Protection for lens in vandal prone areas. one-piece cast bronze, replaces standard lens ring. TR60 Trim Ring - For flush mounting of fixture in concrete pad or paving. Brass ring clamps to housing with stainless steel screw. 1 Inserts behind lens into existing lens gasket. 2 Replaces standard lens ring. May be ordered separately. To order assembled with fixture, add to fixture Cat No. Cat. No. - Example: LTV766/HS60 PHOTOMETRIC DATA See page 99 *Remote transformer required. Also available in LED light sources. See page 117 for model selection. 2B" DIA. L12 1" 6" DIA. HS60 3" 6" DIA. RG60 1F" 6J" DIA. TR60 2" KIM LIGHTING 43

46 Minivault In-grade Lighting Brass LTV761 LTV764 LTV767 SPECIFICATIONS Lens Ring: Die-cast brass, natural finish. Five captive J" blackened stainless steel hex-socket cap screws. Lens: Clear tempered soda lime, F" thick, flush with lens ring, slightly crowned. Lens Gasket: One-piece molded silicone, U-channel wraps completely around lens flange. Housing: Heavy wall die-cast brass. Integral Junction Box: Die-cast brass with stainless steel flat head slotted screws and molded silicone gasket. Die-cast internal Junction Box cover with silicone gasket and anti-siphon plug, two K" NPT taps in bottom, 12 cu in. volume. Socket: (LTV761) Medium base socket for PAR20 reflector lamps. (LTV764) G4 to GY6.35 socket for bipin lamp. (LTV767) 6 emitters configured in a circular array. All sockets mounted on yoke providing ±15 vertical adjustment and 340 rotation, locking screws, black anodized gimble ring. Transformer: Integral 120 Volt to 12 Volt, 50 watt electronic stepdown transformer for LTV764 only. Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 44 KIM LIGHTING

47 NEW LED PAR20 Halogen 120 Volt MR16 Halogen 6 Emitters LED 6 Watt 19 32" " 15 6" DIA. Optical Adjustment 340 1D" (2) K" NPT 15 1K" 6J" DIA. ORDERING INFORMATION Cat. No. Construction Wattage / Lamp LTV761 Brass 50W PAR20 Halogen FIXTURE OPTIONS (Ordered separately from fixture) Cat. No. Description See Page HL73 2 Hex Cell Louver 91 Provides additional brightness control. PL73 2 Prismatic Lens 91 Prismatic spread lens softens lamp distribution. Best with flood lamps. SL73 2 Spread Lens 91 Linear spread lens creates an oval beam pattern. Best with spot lamps. L12 Internal Louver 91 Clips onto rim of MR16 lamp and provides additional brightness control. L20 Internal Louver 91 Clips onto rim of PAR20 lamp and provides additional brightness control. HS60 3 Half Shield - For directional glare control toward the viewer. one-piece cast bronze, replaces standard lens ring. RG60 3 Rock Guard - Protection for lens in vandal prone areas. one-piece cast bronze, replaces standard lens ring. TR60 Trim Ring - For flush mounting of fixture in concrete pad or paving. Brass ring clamps to housing with stainless steel screw. 2 Inserts behind lens into existing lens gasket. 3 Replaces standard lens ring. May be ordered separately. To order assembled with fixture, add to fixture Cat No. Cat. No. - Example: LTV764/HS60 LTV764 Brass 50W MR16 Halogen Integral Transformer LTV767NF/6L3K120 Brass LTV767NF/6L5K120 NEW PHOTOMETRIC DATA See pages 99, 100, and K = 3500K color temperature. 5K = 5100K color temperature. 6 Emitter LED circular array 7.2W Also available in LED light sources. See page 117 for model selection. 6" DIA. 2B" DIA. 1" L12 MR16 LAMP ONLY 6" DIA. 2D" DIA. 1J" L20 PAR20 LAMP ONLY 6J" DIA. HS60 3" RG60 1F" TR60 2" KIM LIGHTING 45

48 Minivault In-grade Lighting Die-Cast Aluminum KLV360 KLV365 SPECIFICATIONS (IN-GRADE OR SURFACE MOUNTING) Lens Ring: Die-cast low copper alloy aluminum. Five captive J" blackened stainless steel hex-socket cap screws. Lens: Clear tempered soda lime, F" thick, flush with lens ring, slightly crowned. Lens Gasket: One-piece molded silicone, U-channel wraps completely around lens flange. Housing: Die-cast low copper alloy aluminum, clear anodized prior to finishing. Socket: G4 to GY6.35 socket for bipin lamp, mounted on yoke providing ±15 vertical adjustment and 340 rotation, locking screws, black anodized gimble ring. Cable: 6' # Volt cable with fork connector, sealed entry into body with anti-siphon plug. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over an anodized pre-treatment and Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. SPECIFICATIONS (IN-GRADE OR SURFACE MOUNTING) Half Shield Lens Ring: Die-cast low copper alloy aluminum. Five captive J" blackened stainless steel hex-socket cap screws. Lens: Clear tempered soda lime, F" thick, flush with lens ring, slightly crowned. Lens Gasket: One-piece molded silicone, U-channel wraps completely around lens flange. Housing: Die-cast low copper alloy aluminum. Socket: G4 to GY6.35 socket for bipin lamp, mounted on yoke providing ±15 vertical adjustment and 340 rotation, locking screws, black anodized gimble ring. Cable: 6' # Volt cable with fork connector, sealed entry into body with anti-siphon plug. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over an anodized pre-treatment and Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 46 KIM LIGHTING

49 12 Volt MR16 Halogen 6" DIA. Optical Adjustment " " 6" DIA. Optical Adjustment " " Low Voltage Cable Exit 3" FIXTURE OPTIONS (Ordered separately from fixture) Cat. No. Description See page HL73 1 Hex Cell Louver 91 Provides additional brightness control. PL73 1 Prismatic Lens 91 Prismatic spread lens softens lamp distribution. Best with flood lamps. SL73 1 Spread Lens 91 Linear spread lens creates an oval beam pattern. Best with spot lamps. L12 Internal Louver 91 Clips onto rim of MR16 lamp and provides additional brightness control. 1 Inserts behind lens into existing lens gasket. See Option pages for complete ordering information and finishes available. 6J" DIA. 6J" DIA. KLV360 KLV365 Also available in LED light sources. See page 117 for model selection. ORDERING INFORMATION Cat. No.* Construction Wattage / Lamp KLV360BL Aluminum 20W - 75W KLV360DB Aluminum MR16 Bipin KLV360GR Aluminum Halogen KLV365BL KLV365DB KLV365GR Aluminum Aluminum Aluminum NOTE: KLV360 and KLV365 replaces the discontinued KLV310 and KLV315. PHOTOMETRIC DATA See page 99 *Remote transformer required. L12 2B" DIA. 1" Aluminum Finishes Black BL Dark Bronze DB Verde Green GR KIM LIGHTING 47

50 48 KIM LIGHTING

51 Ravenna Style for Landscape Illumination Style is the combination of elegance and the honesty of purpose embodied in an object or person in this case, the Ravenna Accent Luminaires. These two simple designs please the eye by blending into the natural surroundings they were designed to illuminate. The use of popular compact MR16 lamps and a cleverly concealed transformer create the overall effect. The leaf-like design, slender body, and simple lighting element, produce a style destined to become another Kim classic. Rendered in either brass or aluminum, these designs will last for years to come. 12 Volt or 120 Volt options provide flexibility for the most demanding installations, while maintaining the use of MR16 Halogen lamps. The 120 Volt luminaires include an integrated electronic stepdown transformer concealed in the base of the fixture body yoke. This is an ideal solution when distances between fixtures and power sources make 12 Volt distribution impractical. Highlighter is a tall, adjustable accent that can perform numerous functions. It is also a path light! Its aimable head can be used to pinpoint a detail on the ground, to softly light a walk, or to illuminate a stairway. Turned away from the viewer, Highlighter can reach over low-level ground cover to light a tree, accent a wall or column, accent a sculpture, or illuminate flowering plants. Lowlighter is a short companion, able to cover a wide range of tasks with style. This small unit can be used like a traditional landscape accent, mounted on the ground to highlight trees, shrubs, walls, or architectural elements and sculpture. Mounted on the wall, ceiling, or under an eave, this attractive little unit can be used for perimeter lighting, area and deck illumination, wall wash, or grazing effect. Small enough to be mounted in trees, the lowlighter can also be used for moonlighting, canopy lighting, and pathway illumination. The natural shape and style will blend in, providing a very unobtrusive application. KIM LIGHTING 49

52 Ravenna Highlighter Accent / Path Lighting Die-Cast Brass Die-Cast Aluminum KLV175 BN175 KLV170 EL170 DIE-CAST BRASS SPECIFICATIONS Lamp Housing: Die-cast brass with die-cast cover, stainless steel fasteners and stainless steel set screw lock for aiming pivot. Aiming: Aimable 358 vertically, horizontal aiming controlled by installation on mounting device. Ravenna Yoke: Die-cast brass, stainless steel fasteners and K" NPSM brass nipple mount. Lens: Tempered glass, B" nominal thickness. Gasketing: Silicone gaskets used throughout. Socket: G4 to GY6.35 socket for bipin lamp. Transformer: (12 Volt - KLV175) Remote transfomer required. (120 Volt - BN175) 120 Volt to 12 Volt, 20 to 50 watt electronic stepdown transformer, enclosed and gasketed in yoke base. Wiring: (12 Volt) 6' No Volt cable with spade connectors for low voltage cable system connection. (120 Volt) No. 18AWM rated 105 C. Finish: Natural Brass (NB) and Verde Green Patina (VG). See page 3. Certification: UL Listed to U.S. and Canadian safety standards for wet locations. DIE-CAST ALUMINUM SPECIFICATIONS Lamp Housing: Die-cast aluminum with die-cast cover, stainless steel fasteners and stainless steel set screw lock for aiming pivot. Aiming: Aimable 358 vertically, horizontal aiming controlled by installation on mounting device. Ravenna Yoke: Die-cast aluminum, stainless steel fasteners and K" NPSM brass nipple mount. Lens: Tempered glass, B" nominal thickness. Gasketing: Silicone gaskets used throughout. Socket: G4 to GY6.35 socket for bipin lamp. Transformer: (12 Volt - KLV170) Remote transfomer required. (120 Volt - EL170) 120 Volt to 12 Volt, 20 to 50 watt electronic stepdown transformer, enclosed and gasketed in yoke base. Wiring: (12 Volt) 6' No Volt cable with spade connectors for low voltage cable system connection. (120 Volt) No. 18AWM rated 105 C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 50 KIM LIGHTING

53 12 Volt 120 Volt MR16 Halogen 5M" 3D" 23L" FIXTURE OPTIONS (Ordered separately from fixture) Cat. No. Description See page HL 1 Hex Cell Louver 91 Provides additional brightness control. PL 1 Prismatic Lens 91 Prismatic spread lens softens lamp distribution. Best with flood lamps. SL 1 Spread Lens 91 Linear spread lens creates an oval beam pattern. Best with spot lamps. 1 Inserts behind lens. Electronic Stepdown Transformer (in base) 120 Volt only K" NPSM ORDERING INFORMATION 12 Volt Cat. No.* Construction Wattage / Lamp KLV175NB Brass 20W - 50W KLV175VG Brass MR16 Bipin Halogen KLV170BL Aluminum KLV170DB Aluminum KLV170GR Aluminum 120 Volt Cat. No. Construction Wattage / Lamp BN175NB Brass 20W - 50W BN175VG Brass MR16 Bipin Halogen EL170BL Aluminum EL170DB Aluminum EL170GR Aluminum PHOTOMETRIC DATA See pages 99, 101, and 106 U.S. PATENT D407,842 *Remote transformer required. 12 VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 86 KLV400 2 Spear Mount 86 JB1 Architectural J-Box 94 JBR-2 thru 24 In-grade J-Box 95 SM18 Stanchion Mount 96 2 Must be installed in concrete. 120 VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 94 JB1 Architectural J-Box 94 JBR-2 thru 24 In-grade J-Box 95 JBR30, JBR32 Staked In-grade J-Box 95 SM18 Stanchion Mount 96 See Option pages for complete ordering information and finishes available. Also available in LED light sources. See page 117 for model selection. Aluminum Finishes Brass Finishes Black BL Natural Brass NB Dark Bronze DB Verde Green Patina VG Verde Green GR KIM LIGHTING 51

54 Ravenna Lowlighter Accent Lighting Die-Cast Brass Die-Cast Aluminum KLV275 BN275 KLV270 EL270 SPECIFICATIONS Lamp Housing: Die-cast brass with die-cast cover, stainless steel fasteners, and stainless steel set screw lock for aiming pivot. Aiming: Aimable 358 vertically, horizontal aiming controlled by installation on mounting device. Ravenna Yoke: Die-cast brass, stainless steel fasteners and K" NPSM brass nipple mount. Lens: Tempered glass, B" nominal thickness. Gasketing: Silicone gaskets used throughout. Socket: G4 to GY6.35 socket for bipin lamp. Transformer: (12 Volt - KLV275) Remote transfomer required. (120 Volt - BN275) 120 Volt to 12 Volt, 20 to 50 watt electronic stepdown transformer, enclosed and gasketed in yoke base. Wiring: (12 Volt) 6' No Volt cable with spade connectors for low voltage cable system connection. (120 Volt) No. 18AWM rated 105 C. Finish: Natural Brass (NB) and Verde Green Patina (VG). See page 3. Certification: UL Listed to U.S. and Canadian safety standards for wet locations. SPECIFICATIONS Lamp Housing: Die-cast low copper aluminum with die-cast cover, stainless steel fasteners, and stainless steel set screw lock for aiming pivot. Aiming: Aimable 358 vertically, horizontal aiming controlled by installation on mounting device. Ravenna Yoke: Die-cast aluminum, stainless steel fasteners and K" NPSM brass nipple mount. Lens: Tempered glass, B" nominal thickness. Gasketing: Silicone gaskets used throughout. Socket: G4 to GY6.35 socket for bipin lamp. Transformer: (12 Volt - KLV270) Remote transfomer required. (120 Volt - EL270) 120 Volt to 12 Volt, 20 to 50 watt electronic stepdown transformer, enclosed and gasketed in yoke base. Wiring: (12 Volt) 6' No Volt cable with spade connectors for low voltage cable system connection. (120 Volt) No. 18AWM rated 105 C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 52 KIM LIGHTING

55 12 Volt 120 Volt MR16 Halogen Electronic Stepdown Transformer (in base) 120 Volt only 5M" 3D" 8E" K" NPSM FIXTURE OPTIONS (Ordered separately from fixture) Cat. No. Description See page HL 1 Hex Cell Louver 91 Provides additional brightness control. PL 1 Prismatic Lens 91 Prismatic spread lens softens lamp distribution. Best with flood lamps. SL 1 Spread Lens 91 Linear spread lens creates an oval beam pattern. Best with spot lamps. 1 Inserts behind lens. ORDERING INFORMATION 12 Volt Cat. No.* Construction Wattage / Lamp KLV275NB Brass 20W - 50W KLV275VG Brass MR16 Bipin Halogen KLV270BL Aluminum KLV270DB Aluminum KLV270GR Aluminum 120 Volt Cat. No. Construction Wattage / Lamp BN275NB Brass 20W - 50W BN275VG Brass MR16 Bipin Halogen EL270BL Aluminum EL270DB Aluminum EL270GR Aluminum PHOTOMETRIC DATA See page 99 U.S. PATENT D407,842 *Remote transformer required. Aluminum Finishes Brass Finishes Black BL Natural Brass NB Dark Bronze DB Verde Green Patina VG Verde Green GR 12 VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 86 KLV400 2 Spear Mount 86 KLV405 Surface Mount 87 KLV415 Extension Mount 87 JBR-2 thru 24 In-grade J-Box 95 JBR30 Staked In-grade Mount 95 SM18 Stanchion Mount 96 2 Must be installed in concrete. 120 VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 94 JB1 Architectural J-Box 94 J-25N Portable Spear Mount 94 JBR-2 thru 24 In-grade J-Box 95 JBR30, JBR32 Staked In-grade J-Box 95 SM18 Stanchion Mount 96 J-27N Surface Mount 96 JWBR Brass Architectural Wall Mount 96 JW Architectural Wall Mount 96 See Option pages for complete ordering information and finishes available. Also available in LED light sources. See page 117 for model selection. KIM LIGHTING 53

56 54 KIM LIGHTING

57 Bell Classic Landscape Illuminator WALL MOUNTED BELL Mounted on the wall, the attractive wall mounted version may be used for perimeter lighting, area and deck illumination, wall wash, or for a grazing effect. DB Dark Bronze GR Green BL Black NB Natural Brass VG Verde Green Patina BL Black DB Dark Bronze The Bell Series, available in both 12 Volt and 120 Volt, combines integrated design and application flexibility to reach all areas of landscape illumination. The ground level models are further expanded by the addition of wall mounted and suspended luminaires. The luminaire is a slim, internationally styled fixture that may be used as an accent or path light. Turned away from view, its head may be adjusted upward to reach above low level ground cover to accent an architectural detail, landscape focus, or interesting element such as a fountain or statue. Its rotatable head may also be aimed downward to illuminate a walkway or stairway. NB Natural Brass GR Green VG Verde Green Patina BL Black DB Dark Bronze GR Green NB Natural Brass VG Verde Green Patina KIM LIGHTING 55

58 Bell Accent / Path Lighting Die-Cast Brass Die-Cast Aluminum KLV165 BN165 KLV160 EL160 DIE-CAST BRASS SPECIFICATIONS Housing and Lens Frame: Die-cast brass. Frame with silicone gasket, attaches to housing with four captive J-20 stainless steel, slotted cap screws. Arm: Cast brass. Head is independently rotatable 300 vertically from top dead center. Head may be positioned straight up. Horizontal rotation of entire fixture controlled by installation on mounting device. Set screw provided for locking position. Stem: K" schedule 40 brass pipe with K" NPT at bottom plus solid brass locknut for mounting. Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward. Socket: (12 Volt - KLV165) G4 to GY6.35 socket for bipin lamp. (120 Volt - BN165) Porcelain medium base. Wiring: (12 Volt) 3' No Volt cable with fork connectors. (120 Volt) No. 18AWM rated 105 C. Finish: Natural Brass (NB) and Verde Green Patina (VG). See page 3. Certification: UL Listed to U.S. and Canadian safety standards for wet locations. DIE-CAST ALUMINUM SPECIFICATIONS Housing and Lens Frame: Die-cast low copper alloy aluminum. Frame with silicone gasket, attaches to housing with four captive J-20 stainless steel, slotted cap screws. Arm: Cast aluminum. Head is independently rotatable 300 vertically from top dead center. Head may be positioned straight up. Horizontal rotation of entire fixture controlled by installation on mounting device. Set screw provided for locking position. Stem: K" schedule 40 aluminum pipe with K" NPT at bottom plus solid brass locknut for mounting. Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward. Socket: (12 Volt - KLV160) G4 to GY6.35 socket for bipin lamp. (120 Volt - EL160) Porcelain medium base. Wiring: (12 Volt) 3' No Volt cable with fork connectors. (120 Volt) No. 18AWM rated 105 C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 56 KIM LIGHTING

59 12 Volt MR16 Halogen 120 Volt PAR20 Halogen / A-19 Incand K" 5K" DIA. 7C" 2J" FIXTURE OPTIONS (Ordered separately from fixture) Cat. No. Description See page HL72 1 Hex Cell Louver 91 Provides additional brightness control. PL72 1 Prismatic Lens 91 Prismatic spread lens softens lamp distribution. Best with flood lamps. SL72 1 Spread Lens 91 Linear spread lens creates an oval beam pattern. Best with spot lamps. 1 Inserts behind lens into existing lens gasket. 29" K" NPT ORDERING INFORMATION 12 Volt Cat. No.* Construction Wattage / Lamp KLV165NB Brass 50W KLV165VG Brass MR16 Bipin Halogen KLV160BL Aluminum KLV160DB Aluminum KLV160GR Aluminum 120 Volt Cat. No. Construction Wattage / Lamp BN165NB Brass 50W 60W BN165VG Brass PAR20 A-19 Halogen Incand. EL160BL Aluminum EL160DB Aluminum EL160GR Aluminum PHOTOMETRIC DATA See pages 99, 101, 104 and 106 *Remote transformer required. Aluminum Finishes Brass Finishes Black BL Natural Brass NB Dark Bronze DB Verde Green Patina VG Verde Green GR 12 VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 86 KLV400 2 Spear Mount 86 KLV415 Extension Module 87 JBR30 Staked In-grade J-Box 88 2 Must be installed in concrete. 120 VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 94 JB1 Architectural J-Box 94 JBR-2 thru 24 In-grade J-Box 95 JBR30 Staked In-grade J-Box 95 SM18 Stanchion Mount 96 See Option pages for complete ordering information and finishes available. Also available in HID lamping. See Kim HID Landscape Catalog. Also available in LED light sources. See page 117 for model selection. KIM LIGHTING 57

60 Bell Accent / Path Lighting Die-Cast Brass Die-Cast Aluminum KLV55 AN55 KLV50 AN50 DIE-CAST BRASS SPECIFICATIONS Housing and Lens Frame: Die-cast brass. Frame with silicone gasket, attaches to housing with four captive J-20 stainless steel, slotted cap screws. Arm: Cast brass. Head is independently rotatable 360 vertically from top dead center. Head may be positioned straight up. Set screw provided for locking position. Wall Plate: Die-cast brass. Attaches to stainless steel plate for mounting to any standard electrical outlet box. Internal set screw provided for locking position. Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward. Socket: (12 Volt - KLV55) G4 to GY6.35 socket for bipin lamp. (120 Volt - AN55) Porcelain medium base. Wiring: (12 Volt) No Volt cord. (120 Volt) No. 18AWM rated 105 C. Finish: Natural Brass (NB) and Verde Green Patina (VG). See page 3. Certification: UL Listed to U.S. and Canadian safety standards for wet locations. DIE-CAST ALUMINUM SPECIFICATIONS Housing and Lens Frame: Die-cast low copper alloy aluminum. Frame with silicone gasket, attaches to housing with four captive J-20 stainless steel, slotted cap screws. Arm: Cast aluminum. Head is independently rotatable 360 vertically from top dead center. Head may be positioned straight up. Set screw provided for locking position. Wall Plate: Die-cast low copper alloy aluminum. Attaches to stainless steel plate for mounting to any standard electrical outlet box. Internal set screw provided for locking position. Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward. Socket: (12 Volt - KLV50) G4 to GY6.35 socket for bipin lamp. (120 Volt - AN50) Porcelain medium base. Wiring: (12 Volt) No Volt cord. (120 Volt) No. 18AWM rated 105 C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 58 KIM LIGHTING

61 12 Volt MR16 Halogen 120 Volt PAR20 Hal. / A-19 Incand L" 7K" 5" DIA. FIXTURE OPTIONS (Ordered separately from fixture) Cat. No. Description See page HL72 1 Hex Cell Louver 91 Provides additional brightness control. PL72 1 Prismatic Lens 91 Prismatic spread lens softens lamp distribution. Best with flood lamps. SL72 1 Spread Lens 91 Linear spread lens creates an oval beam pattern. Best with spot lamps. 1 Inserts behind lens into existing lens gasket. 5K" DIA. ORDERING INFORMATION 12 Volt Cat. No.* Construction Wattage / Lamp KLV55NB Brass 50W KLV55VG Brass MR16 Bipin Halogen KLV50BL Aluminum KLV50DB Aluminum KLV50GR Aluminum 120 Volt Cat. No. Construction Wattage / Lamp AN55NB Brass 50W 60W AN55VG Brass PAR20 A-19 Halogen Incand. AN50BL Aluminum AN50DB Aluminum AN50GR Aluminum PHOTOMETRIC DATA See pages 101 and 106 *Remote transformer required. Also available in LED light sources. See page 117 for model selection. Aluminum Finishes Brass Finishes Black BL Natural Brass NB Dark Bronze DB Verde Green Patina VG Verde Green GR KIM LIGHTING 59

62 Adjustable Path Lighter Accent / Path Lighting Die-Cast Brass Die-Cast Aluminum KLV166 BN166 KLV161 EL161 DIE-CAST BRASS SPECIFICATIONS Housing and Lens Frame: Die-cast brass. Lens frame with silicone gasket, attaches to housing with four captive J-20 stainless steel, slotted cap screws. Crook Arm: Formed J" schedule 40 brass pipe. Provides 6" height adjustment. Scroll and Scroll Collar: Cast brass. Transitional Hub: Cast brass with anti-rotational set screws. Base Stem: K" schedule 40 brass pipe with K" NPT at bottom plus solid brass locknut for mounting. Lens: Tempered clear soda lime glass with silicone gasket. Socket: (12 Volt - KLV166) G4 to GY6.35 socket for bipin lamp. (120 Volt - BN166) Porcelain medium base. Wiring: (12 Volt) 3' No Volt cable with fork connectors. (120 Volt) No. 18AWM rated 105 C. Finish: Natural Brass (NB) or Verde Green Patina (VG). See page 3. Certification: UL Listed to U.S. and Canadian safety standards for wet locations. DIE-CAST ALUMINUM SPECIFICATIONS Housing and Lens Frame: Die-cast low copper alloy aluminum. Lens frame with silicone gasket, attaches to housing with four captive J-20 stainless steel, slotted cap screws. Crook Arm: Formed J" schedule 40 aluminum pipe. Provides 6" height adjustment. Scroll and Scroll Collar: Cast aluminum. Transitional Hub: Cast aluminum with anti-rotational set screws. Base Stem: K" schedule 40 aluminum pipe with K" NPT at bottom plus solid brass locknut for mounting. Lens: Tempered clear soda lime glass with silicone gasket. Socket: (12 Volt - KLV161) G4 to GY6.35 socket for bipin lamp. Remote transformer required. (120 Volt - EL161) Porcelain medium base. Wiring: (12 Volt) 3' No Volt cable with fork connectors. (120 Volt) No. 18AWM rated 105 C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 60 KIM LIGHTING

63 12 Volt MR16 Halogen 120 Volt PAR20 Halogen / A-19 Incand. 11" 5K" DIA. 9L" Twist Lock Hub 29" MIN. 35" MAX. Adjustable Height FIXTURE OPTIONS (Ordered separately from fixture) Cat. No. Description See page HL72 1 Hex Cell Louver 91 Provides additional brightness control. PL72 1 Prismatic Lens 91 Prismatic spread lens softens lamp distribution. Best with flood lamps. SL72 1 Spread Lens 91 Linear spread lens creates an oval beam pattern. Best with spot lamps. 1 Inserts behind lens into existing lens gasket. (Not for use with A-19 lamp.) 18" MIN. 24" MAX. K" NPT ORDERING INFORMATION 12 Volt Cat. No.* Construction Wattage / Lamp KLV166NB Brass 50W KLV166VG Brass MR16 Bipin Halogen KLV161BL Aluminum KLV161DB Aluminum KLV161GR Aluminum 120 Volt Cat. No. Construction Wattage / Lamp BN166NB Brass 50W 60W BN166VG Brass PAR20 A-19 Halogen Incand. EL161BL Aluminum EL161DB Aluminum EL161GR Aluminum PHOTOMETRIC DATA See page 103 *Remote transformer required. 12 VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 86 KLV400 2 Spear Mount 86 JBR30 Staked In-grade J-Box 95 2 Must be installed in concrete. 120 VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 94 JB1 Architectural J-Box 94 JBR-2 thru 24 In-grade J-Box 95 JBR30 Staked In-grade J-Box 95 SM18 Stanchion Mount 96 See Option pages for complete ordering information and finishes available. Also available in HID lamping. See Kim HID Landscape Catalog. Also available in LED light sources. See page 117 for model selection. Aluminum Finishes Brass Finishes Black BL Natural Brass NB Dark Bronze DB Verde Green Patina VG Verde Green GR KIM LIGHTING 61

64 62 KIM LIGHTING

65 Traditional Path Lighting All New Die-Cast Design Familiar Appearance - All New Design Kim was one of the very first producers of quality path lighters. These fixtures are part of every landscape designers vocabulary, and now these classic products have been totally redesigned in die-cast brass and aluminum. Available in line voltage incandescent and low voltage halogen, these renewed products re-set the standard of excellence. Under-hood Reflector and Tool-less Re-lamping In redesigning the Path Lighters, new features have been incorporated to increase efficiency and serviceability. Each hood includes a reflector to redirect light onto the pathway surface. Further, this new feature provides solid support for the hood itself, and allows access for lamp maintenance without the use of a single tool. Wide Selection of Hood Designs The entire range of this product includes two stem lengths, three hood designs, two brass finishes, and three aluminum finishes. The hoods are completely interchangeable in the field without the use of tools, and easily replaced should any be damaged by abuse. Never before, has selecting the combination of features that best suits a specific application been so easy. KIM LIGHTING 63

66 Traditional Path Lighting Copper / Brass KLV182NB/H60NB BN182NB/H60NB KLV182NB/H80NB BN182NB/H80NB KLV182NB/H70NB BN182NB/H70NB EL180 SERIES PATH LIGHTS The matrix below illustrates the EL180 Traditional Series available in three hood styles: Pagoda, Cone, and Mushroom, interchangeable with 3 stem heights 8",13", or 20". H60 Pagoda H70 Mushroom H80 Cone COPPER / BRASS SPECIFICATIONS Hood: Spun copper with low copper alloy aluminum die-cast reflector and hinge assembly. The hood is either raw copper or verde green patina and the reflector is always painted white. The hood reflector assembly is removable with a no-tool stainless steel lever latch. Hood is available in three styles: Pagoda, Cone, and Mushroom. Husk: Die-cast brass with stainless steel hinge / latch assembly. Globe: Fluted glass. Stem: 8",13", or 20" schedule 40 red brass pipe with K" NPT at bottom plus solid brass locknut for secure mounting. Socket: (12 Volt - KLV179 / KLV182 / KLV187) G4 to GY6.35 bipin for MR16 50 watt max. lamp. (120 Volt - BN179 / BN182 / BN187) Porcelain medium base for A watt max. incandescent lamp. Wiring: (12 Volt) 3' No Volt cable with fork connectors. (120 Volt) No. 18AWM rated 105 C. Finish: Natural Brass (NB) and Verde Green Patina (VG). See page 3. Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 8" stem 13" stem 20" stem 64 KIM LIGHTING

67 12 Volt MR16 Halogen 120 Volt A-19 Incand. ORDERING EXAMPLE Cat. No. - Example: BN182NB/H60NB Hood and Finish Fixture Module and Finish NOTE: Fixture Modules and Hoods may be ordered separately. ORDERING INFORMATION COPPER HOODS PAGODA 8" stem 13" stem 20" stem 7G" DIA. 17F" (8" stem) 22F" (13" stem) 29F" (20" stem) Cat. No. H60NB H60VG Material / Finish Copper / Natural Copper / Verde Green Patina H60 - Pagoda 16B" DIA. 12C" DIA. MUSHROOM Cat. No. H70NB H70VG Cat. No. H80NB H80VG Material / Finish Copper / Natural Copper / Verde Green Patina CONE Material / Finish Copper / Natural Copper / Verde Green Patina 8" stem 13" stem 20" stem H70 - Mushroom 14O" (8" stem) 19O" (13" stem) 26O" (20" stem) 8" stem 13" stem 20" stem H80 - Cone 14F" (8" stem) 19F" (13" stem) 26F" (20" stem) FIXTURE MODULE (Brass Stem, Husk, and Globe) 12 Volt Wattage / Cat. No.* Stem Ht. Material / Finish Lamp KLV179NB 8" Brass / Natural 50W KLV179VG 8" Brass / Verde MR16 Bipin KLV182NB 13" Brass / Natural Halogen KLV182VG 13" Brass / Verde KLV187NB 20" Brass / Natural KLV187VG 20" Brass / Verde 120 Volt Wattage / Cat. No. Stem Ht. Material / Finish Lamp BN179NB 8" Brass / Natural 60W BN179VG 8" Brass / Verde A-19 BN182NB 13" Brass / Natural Incand. BN182VG 13" Brass / Verde BN187NB 20" Brass / Natural BN187VG 20" Brass / Verde *Remote transformer required. The old specification numbers BN60, BR62, KLV60, KLV62, BN71 and BR72 are shown below with their new equivalents: BN60 = BN179VG/H60VG BR62 = BN179NB/H60NB KLV60 = KLV179VG/H60VG KLV62 = KLV179NB/H60NB BN71 = BN187VG/H70VG BR72 = BN187NB/H70NB 12 VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 86 KLV400 Spear Mount VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 94 JB1 Architectural J-Box 94 J-25N Portable Spear Mount 94 JBR-2 thru 24 In-grade J-Box 95 JBR30, JBR32 Staked In-grade J-Box 95 See Option pages for complete ordering information and finishes available. PHOTOMETRIC DATA See pages 102 and 108 Brass Finishes Natural Brass Verde Green Patina NB VG Also available in LED light sources. See page 117 for model selection. KIM LIGHTING 65

68 Traditional Path Lighting Die-Cast Aluminum KLV180BL/H60BL EL180BL/H60BL KLV180BL/H80BL EL180BL/H80BL KLV180BL/H70BL EL180BL/H70BL EL180 SERIES PATH LIGHTS The matrix below illustrates the EL180 Traditional Series available in three hood styles: Pagoda, Cone, and Mushroom, interchangeable with 3 stem heights 8", 13", or 20". H60 Pagoda H70 Mushroom H80 Cone DIE-CAST ALUMINUM SPECIFICATIONS Hood: Spun aluminum with low copper alloy aluminum die-cast reflector and hinge assembly. The hood is painted to order and the reflector is always painted white. The hood reflector assembly is removable with a no-tool stainless steel lever latch. Hood is available in three styles: Pagoda, Cone, and Mushroom. Husk: Die-cast low copper alloy aluminum with stainless steel hinge / latch assembly. Globe: Fluted glass. Stem: 8", 13", or 20" schedule 40 aluminum pipe with K" NPT at bottom plus solid brass locknut for secure mounting. Socket: (12 Volt - KLV177 / KLV180 / KLV185) G4 to GY6.35 bipin for MR16 50 watt max. lamp. (120 Volt - EL177 / EL180 / EL185) Porcelain medium base for A watt max. incandescent lamp. Wiring: (12 Volt) 3' No Volt cable with fork connectors. (120 Volt) No. 18AWM rated 105 C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 8" stem 13" stem 20" stem 66 KIM LIGHTING

69 12 Volt MR16 Halogen 120 Volt A-19 Incand. ORDERING EXAMPLE Cat. No. - Example: EL180GR/H60GR Hood and Finish Fixture Module and Finish NOTE: Fixture Modules and Hoods may be ordered separately. ORDERING INFORMATION ALUMINUM HOODS Cat. No. H60BL H60DB H60GR PAGODA Material / Finish Aluminum / Black Aluminum / Dark Bronze Aluminum / Verde Green MUSHROOM 8" stem 13" stem 20" stem 7G" DIA. H60 - Pagoda 16B" DIA. 17F" (8" stem) 22F" (13" stem) 29F" (20" stem) 12C" DIA. Cat. No. H70BL H70DB H70GR Cat. No. H80BL H80DB H80GR Material / Finish Aluminum / Black Aluminum / Dark Bronze Aluminum / Verde Green CONE Material / Finish Aluminum / Black Aluminum / Dark Bronze Aluminum / Verde Green 8" stem 13" stem 20" stem H70 - Mushroom 14O" (8" stem) 19O" (13" stem) 26O" (20" stem) 8" stem 13" stem 20" stem H80 - Cone 14F" (8" stem) 19F" (13" stem) 26F" (20" stem) FIXTURE MODULE (Aluminum Stem, Husk, and Globe) 12 Volt Wattage / Cat. No.* Stem Ht. Material / Finish Lamp KLV177BL 8" Alum. / Black 50W KLV177DB 8" Alum. / Dark Bronze MR16 Bipin KLV177GR 8" Alum. / Verde Green Halogen KLV180BL 13" Alum. / Black KLV180DB 13" Alum. / Dark Bronze KLV180GR 13" Alum. / Verde Green KLV185BL 20" Alum. / Black KLV185DB 20" Alum. / Dark Bronze KLV185GR 20" Alum. / Verde Green 120 Volt Wattage / Cat. No. Stem Ht. Material / Finish Lamp EL177BL 8" Alum. / Black 60W EL177DB 8" Alum. / Dark Bronze A-19 EL177GR 8" Alum. / Verde Green Incand. EL180BL 13" Alum. / Black EL180DB 13" Alum. / Dark Bronze EL180GR 13" Alum. / Verde Green EL185BL 20" Alum. / Black EL185DB 20" Alum. / Dark Bronze EL185GR 20" Alum. / Verde Green *Remote transformer required. 12 VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 86 KLV400 Spear Mount VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 94 JB1 Architectural J-Box 94 J-25N Portable Spear Mount 94 JBR-2 thru 24 In-grade J-Box 95 JBR30, JBR32 Staked In-grade J-Box 95 See Option pages for complete ordering information and finishes available. PHOTOMETRIC DATA See pages 102 and 108 Aluminum Finishes Black BL Dark Bronze DB Verde Green GR Also available in LED light sources. See page 117 for model selection. KIM LIGHTING 67

70 Mushroom Path Lighting Spun Aluminum KLV115 EL115 EL VOLT SPECIFICATIONS Hood: Spun aluminum, supported on brass rods. Stem: Cast aluminum with K" NPT at bottom, plus solid brass locknut for mounting. Socket: (12 Volt - KLV115) Porcelain medium base with silicone lamp gasket. Wiring: 3' No Volt cable with fork connectors. Lamp: 25 watt A-19 included. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 120 VOLT SPECIFICATIONS Hood: Spun aluminum, supported on brass rods. Louver: (EL116 only) Spun aluminum, supported on brass rods. Stem: Cast aluminum with K" NPT at bottom, plus solid brass locknut for mounting. Socket: (120 Volt - EL115 / EL116) Porcelain medium base with silicone lamp gasket. Wiring: No. 18AWM rated 105 C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 68 KIM LIGHTING

71 12 Volt 120 Volt A-19 Incand. 7E" DIA. 7E" DIA. 2D" 4" 16J" KLV115 EL115 K" NPT EL116 ORDERING INFORMATION 12 Volt Cat. No.* Construction Wattage / Lamp KLV115BL Aluminum 25W - 50W KLV115DB Aluminum A-19 (12 Volt) KLV115GR Aluminum Incandescent Aluminum (25W Lamp Included) 120 Volt Cat. No. Construction Wattage / Lamp EL115BL Aluminum 40W EL115DB Aluminum A-19 EL115GR Aluminum Incandescent EL116BL Aluminum EL116DB Aluminum EL116GR Aluminum PHOTOMETRIC DATA See pages 102 and 107 *Remote transformer required. 12 VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 86 KLV400 Spear Mount VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 94 JB1 Architectural J-Box 94 J-25N Portable Spear Mount 94 JBR-2 thru 24 In-grade J-Box 95 JBR30, JBR32 Staked In-grade J-Box 95 SM18 Stanchion Mount 96 See Option pages for complete ordering information and finishes available. Aluminum Finishes Black BL Dark Bronze DB Verde Green GR KIM LIGHTING 69

72 Traditional Floral 12 Volt Path Lighting Copper / Bronze 120 Volt A-19 Incand. KLV10 KLV12 BN10 BR12 7" 7L" 31J" K" NPT 12 VOLT / 120 VOLT SPECIFICATIONS Hood: Spun copper. Husk: Cast bronze. Stem: B" schedule 40 red brass pipe with K" NPT stainless steel bushing at bottom for mounting. Socket: Porcelain medium base with silicone lamp gasket. Wiring: (12 Volt - KLV10 / KLV12) 3' No Volt cable with fork connectors. (120 Volt - BN10 / BR12) No. 18AWM rated 105 C. Finish: (KLV10 / BN10) Acid etched verde green patina. (KLV12 / BR12) Natural copper. See page 3. Certification: UL Listed to U.S. and Canadian safety standards for wet locations. PHOTOMETRIC DATA See pages 102 and 108 ORDERING INFORMATION 12 Volt Cat. No.* Construction Wattage / Lamp KLV10 (Verde Patina) Copper / Bronze 25W - 50W KLV12 (Natural) Copper / Bronze A-19 (12 Volt) Incandescent (25W lamp included) 120 Volt Cat. No. Construction Wattage / Lamp BN10 (Verde Patina) Copper / Bronze 40W BR12 (Natural) Copper / Bronze A-19 Incandescent *Remote transformer required. 12 VOLT / 120 VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 86 KLV400 1 Spear Mount 86 JB1 2 Architectural J-Box 94 J-25N 2 Portable Spear Mount 94 JBR-2 2 thru 24 2 In-grade J-Box 95 JBR30 2, JBR32 2 Staked In-grade J-Box 95 See Option pages for complete ordering information and finishes available VOLT ONLY VOLT ONLY 70 KIM LIGHTING

73 Wren House Path Lighting Copper / Bronze 120 Volt A-19 Incand. AN30 AR32 9" 9" DIA. SPECIFICATIONS Hoods: Spun copper. Mounting Loop: Cast bronze with 6' stainless steel cable. Suspension: Fixture must be suspended by cable, not the electrical cord. Internal Reflector: Spun aluminum painted silver. Lens: Convex stippled glass, tinted for moonlight tone. Socket: Porcelain medium base. Wiring: 9' cord, No. 18SJTW-A. Finish: (AN30) Acid Etched Verde Green Patina. (AR32) Natural Copper. See page 3. Certification: UL Listed to U.S. and Canadian safety standards for wet locations. ORDERING INFORMATION Cat. No. Construction Wattage / Lamp AN30 (Verde Patina) Copper / Bronze 60W AR32 (Natural) Copper / Bronze A-19 Incandescent PHOTOMETRIC DATA See page 108 NOTE: Fixture must be suspended by the cable provided, not the electrical cord. KIM LIGHTING 71

74 Louvered Body Accent Lighting Die-Cast Aluminum EL120 EL121 SPECIFICATIONS Hood: Die-cast aluminum. Husk: Die-cast aluminum. Globe: Fluted glass, threaded to husk, with neoprene gasket. Stem: K" schedule 40 aluminum pipe with K" NPT and solid brass locknut for mounting. Socket: Porcelain medium base. Wiring: No. 18AWM rated 105 C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. SPECIFICATIONS Hood: Die-cast aluminum. Husk: Die-cast aluminum. Globe: Diffuse-coated glass, threaded to husk, with neoprene gasket. Stem: K" schedule 40 aluminum pipe with K" NPT and solid brass locknut for mounting. Socket: Porcelain medium base. Wiring: No. 18AWM rated 105 C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 72 KIM LIGHTING

75 120 Volt A-19 / A-21 Incandescent 6" DIA. 6" DIA. 16J" 14J" EL120 K" NPT EL121 K" NPT ORDERING INFORMATION Cat. No. Construction Wattage / Lamp EL120BL Aluminum 100W EL120DB Aluminum A-21 EL120GR Aluminum Incandescent EL121BL Aluminum 75W EL121DB Aluminum A-19 EL121GR Aluminum Incandescent PHOTOMETRIC DATA See page 107 MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 94 JB1 Architectural J-Box 94 J-25N Portable Spear Mount 94 JBR-2 thru 24 In-grade J-Box 95 JBR30, JBR32 Staked In-grade J-Box 95 SM18 Stanchion Mount 96 See Option pages for complete ordering information and finishes available. Aluminum Finishes Black BL Dark Bronze DB Verde Green GR KIM LIGHTING 73

76 The Path Pilot Path Lighting Die-Cast Aluminum KLV106 EL105 EL VOLT SPECIFICATIONS Top, Louvers, and Husk: Interlocking die-cast low copper aluminum sections drawn together with four concealed stainless steel screws. Globe: Diffuse-coated glass, threaded to husk, with neoprene ring gasket. Support Shaft: 1D" diameter extruded aluminum with K" NPSM brass nipples for head attachment plus solid brass locknut for mounting. Socket: (12 Volt - KLV106) G4 to GY6.35 socket for bipin 12 Volt lamp. Wiring: 3' No Volt cable with fork connectors. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 120 VOLT SPECIFICATIONS Top, Louvers, and Husk: Interlocking die-cast low copper aluminum sections drawn together with four concealed stainless steel screws. Globe: (EL105) Diffuse-coated glass, (EL106) Fluted glass, threaded to husk, with neoprene ring gasket. Support Shaft: 1D" diameter extruded aluminum with K" NPSM brass nipples for head attachment plus solid brass locknut for mounting. Socket: (120 Volt - EL105 / EL106) Porcelain medium base. Wiring: No. 18AWM rated 105 C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 74 KIM LIGHTING

77 12 Volt T-3 / T-4 Halogen 120 Volt A-19 / A-21 Incandescent 6" DIA. 6" DIA. 7E" 9J" 16L" 18B" EL105 KLV106 K" NPSM EL106 ORDERING INFORMATION 12 Volt Cat. No.* Construction Wattage / Lamp KLV106BL Aluminum 20W - 50W KLV106DB Aluminum T-3 or T-4 Bipin KLV106GR Aluminum Halogen 120 Volt Cat. No. Construction Wattage / Lamp EL105BL Aluminum 75W 100W EL105DB Aluminum A-19 A-21 EL105GR Aluminum Incand. Incand. EL106BL Aluminum EL106DB Aluminum EL106GR Aluminum PHOTOMETRIC DATA See pages 102 and 107 U.S. PATENT D329,101 *Remote transformer required. 12 VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 86 KLV400 Low Voltage Spear Mount 86 KLV415 1 Extension Module 87 1 Must be used in conjunction with EP VOLT MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 94 JB1 Architectural J-Box 94 J-25N Portable Spear Mount 94 JBR-2 thru 24 In-grade J-Box 95 JBR30, JBR32 Staked In-grade J-Box 95 SM18 Stanchion Mount 96 See Option pages for complete ordering information and finishes available. Aluminum Finishes Black BL Dark Bronze DB Verde Green GR KIM LIGHTING 75

78 The Path Pilot Path Lighting Die-Cast Aluminum 12 Volt T-3 / T-4 Halogen KLV101 6" DIA. 5" 14" K" NPSM SPECIFICATIONS Top and Husk: Interlocking die-cast aluminum sections drawn together with four concealed stainless steel screws. Globe: Heat resistant diffuse-coated glass with silicone gasket. Support Shaft: 1D" diameter extruded aluminum with K" NPSM brass nipples plus solid brass locknut for mounting. Socket: G4 to GY6.35 socket for bipin lamp. Wiring: 3' No Volt cable with fork connectors. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. ORDERING INFORMATION Cat. No.* Construction Wattage / Lamp KLV101BL Aluminum 20W - 35W KLV101DB Aluminum T-3 or T-4 Bipin KLV101GR Aluminum Halogen PHOTOMETRIC DATA See page 102 U.S. PATENT D329,101 *Remote transformer required. MOUNTING OPTIONS Cat. No. Option See page EP17 Landscape Light Post Mount 86 KLV400 Spear Mount 86 KLV415 Extension Module 87 See Option pages for complete ordering information and finishes available. Aluminum Finishes Black BL Dark Bronze DB Verde Green GR 76 KIM LIGHTING

79 The Path Pilot series of fixtures provide superb glare-free illumination that will not distract from surrounding accent lighting. KIM LIGHTING 77

80 Compact Bollard Accent Lighting Die-Cast Aluminum KLV150 EL VOLT SPECIFICATIONS Top and Louvers: Interlocking die-cast aluminum sections drawn together with four concealed stainless steel screws. Louver base assembly fastens internally to riser. Riser: 5" diameter extruded aluminum, B" typical wall thickness. Attaches to anchor base with four countersunk stainless steel flat socket head screws. Anchor Base: Concealed cast aluminum. Three C" x 10" + 2" zinc plated anchor bolts. Globe: Diffuse-coated glass, threaded to husk, with neoprene gasket. Socket: G4 to GY6.35 socket for bipin lamp. Wiring: 3' No Volt cable with fork connectors. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 120 VOLT SPECIFICATIONS Top and Louvers: Interlocking die-cast aluminum sections drawn together with four concealed stainless steel screws. Louver base assembly fastens internally to riser. Riser: 5" diameter extruded aluminum, B" typical wall thickness. Attaches to anchor base with four countersunk stainless steel flat socket head screws. Anchor Base: Concealed cast aluminum. Three C" x 10" + 2" zinc plated anchor bolts. Globe: Diffuse-coated glass, threaded to husk, with neoprene gasket. Socket: G4 to GY6.35 socket for bipin lamp. Transformer: 120 Volt to 12 Volt, 20 to 50 watt electronic stepdown transformer, enclosed in riser. Wiring: No. 18AWM rated 105 C. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. 78 KIM LIGHTING

81 12 Volt 120 Volt T-3 / T-4 Halogen 6" DIA. BASE PLAN 1L" DIA. Conduit Opening 2E" DIA. Bolt Circle 22K" Electronic Stepdown Transformer (in riser) 120 Volt only Rock, Bark, Low Ground Cover, etc. Paving 5" DIA. 2K" MIN. x Rigid Conduit (by others) x = required depth of conduit per local codes. ORDERING INFORMATION 12 Volt Cat. No.* Construction Wattage / Lamp KLV150BL Aluminum 20W - 50W KLV150DB Aluminum T-3 or T-4 Bipin KLV150GR Aluminum Halogen MOUNTING INFORMATION: Bollards are installed with anchor bolts imbedded in a poured-inplace concrete footing (by others). CAUTION: Concrete footing should be high enough above grade to avoid contact between fixture shaft and soil or standing water. 120 Volt Cat. No. Construction Wattage / Lamp EL150BL Aluminum 20W - 50W EL150DB Aluminum T-3 or T-4 Bipin EL150GR Aluminum Halogen PHOTOMETRIC DATA See pages 102 and 107 *Remote transformer required. Also available in HID lamping. See Kim HID Landscape Catalog. Also see Kim Low Level Luminaires Catalog. Aluminum Finishes Black BL Dark Bronze DB Verde Green GR KIM LIGHTING 79

82 Step Light 12 Volt 120 Volt T-3 / T-4 Hal. Path Lighting Die-Cast Aluminum 277 Volt Twin Tube Fluor. KLV800 EL800 EL805 EL806 9C" L" 3L" L" 1M" 3K" 2D" K" NPT 4K" 7B" SPECIFICATIONS Housing: Die-cast low copper alloy aluminum with clear anodized finish. Two K" NPT in sides. Housing mounts into concrete, brick, or masonry (non-combustible materials). Internal splice area provided behind lamp plate. Lens Frame: Die-cast aluminum, with silicone gasket, attaches to housing with two captive stainless steel, hex socket cap screws. Lens: Tempered prismatic glass with silicone gasket, concealed above lens frame opening. Socket: (KLV800) G4 to GY6.35 socket for bipin lamp. (EL800) G4 to GY6.35 socket for bipin lamp. (EL805 / EL806) G23D 2-pin for twin tube fluorescent lamp. Transformer: (12 Volt - KLV800) Remote transformer required. (120 Volt - EL800) 120 Volt to 12 Volt, 20 to 50 watt electronic stepdown transformer. (120 Volt - EL805) 9 watt, Normal power factor, 32 F, starting. (277 Volt - EL806) 9 watt, Normal power factor, 32 F, starting. Finish: On Lens Frame only, Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. ORDERING INFORMATION 12 Volt Cat. No.* Construction Wattage / Lamp KLV800BL Aluminum 50W KLV800DB Aluminum T-3 or T-4 Bipin KLV800GR Aluminum Halogen 120 Volt Cat. No. Construction Wattage / Lamp EL800BL Aluminum 50W EL800DB Aluminum T-3 or T-4 Bipin EL800GR Aluminum Halogen EL805BL Aluminum 9W EL805DB Aluminum Twin Tube EL805GR Aluminum Fluorescent 32 F starting temp. 277 Volt Cat. No. Construction Wattage / Lamp EL806BL Aluminum 9W EL806DB Aluminum Twin Tube EL806GR Aluminum Fluorescent 32 F starting temp. Aluminum Finishes Black BL Dark Bronze DB Verde Green GR Also available in LED light sources. See page 117 for model selection. *Remote transformer required. PHOTOMETRIC DATA See pages 102 and KIM LIGHTING

83 Step Light 12 Volt 120 Volt T-3 / T-4 Hal. Path Lighting Die-Cast Aluminum 277 Volt Quad Tube Fluor. KLV810 EL810 EL815 EL816 L" 6" DIA. 5" O" 2M" 4" K" NPT D" 5L" 4B" SPECIFICATIONS Housing: Die-cast low copper alloy aluminum with clear anodized finish. Two K" NPT in sides. Housing mounts into concrete, brick, or masonry (non-combustible materials). Internal splice area provided behind lamp plate. Lens Frame: Die-cast aluminum, with silicone gasket, attaches to housing with two captive stainless steel, hex socket cap screws. Lens: Tempered prismatic glass with silicone gasket, concealed above lens frame opening. Socket: (KLV810) G4 to GY6.35 socket for bipin lamp. (EL810) G4 to GY6.35 socket for bipin lamp. (EL815 / EL816) G23D 2-pin for quad fluorescent lamp. Transformer: (12 Volt - KLV810) Remote transformer required. (120 Volt - EL810) 120 Volt to 12 Volt, 20 to 50 watt electronic stepdown transformer. (120 Volt - EL815) 13 watt, Normal power factor, 32 F, starting. (277 Volt - EL816) 13 watt, Normal power factor, 32 F, starting. Finish: On Lens Frame only, Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a Titanated Zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Certification: UL Listed to U.S. and Canadian safety standards for wet locations. ORDERING INFORMATION 12 Volt Cat. No.* Construction Wattage / Lamp KLV810BL Aluminum 50W KLV810DB Aluminum T-3 or T-4 Bipin KLV810GR Aluminum Halogen 120 Volt Cat. No. Construction Wattage / Lamp EL810BL Aluminum 50W EL810DB Aluminum T-3 or T-4 Bipin EL810GR Aluminum Halogen EL815BL Aluminum 13W EL815DB Aluminum Quad Tube EL815GR Aluminum Fluorescent 32 F starting temp. 277 Volt Cat. No. Construction Wattage / Lamp EL816BL Aluminum 13W EL816DB Aluminum Quad Tube EL816GR Aluminum Fluorescent 32 F starting temp. Aluminum Finishes Black BL Dark Bronze DB Verde Green GR Also available in LED light sources. See page 117 for model selection. *Remote transformer required. PHOTOMETRIC DATA See pages 102 and 107 KIM LIGHTING 81

84 El Dorado Economy Accent Lighting Die-Cast Aluminum 12 Volt MR16 Hal. LLV205 6J" 3" DIA. 1L" 7" SPECIFICATIONS Housing and Shield: Die-cast aluminum. No-tool twist-on shield provided with drain slot. Swivel: Die-cast aluminum with locking teeth, 20mm threaded stem. Stainless steel screw. Stake: Die-cast aluminum, included. Lens: F" thick flat tempered glass with silicone gasket. Socket: GU5.3 socket for bipin lamp. Wire: 10" No Volt wire with fork connectors. Lamp: 20 watt MR16 flood (BAB) included. Finish: Black (BL) powder coat paint only. Certification: UL Listed to U.S. and Canadian safety standards for wet locations. ORDERING INFORMATION Cat. No.* Construction Wattage / Lamp LLV205BL Aluminum 20W - 35W 20 watt MR16 Bipin Halogen included NOTE: 20W BAB MR16 Lamp and Stake MOUNTING OPTIONS included with fixture. Stake Mount Only (included) PHOTOMETRIC DATA See page 99 *Remote transformer required. Available in Value 4-packs only. 82 KIM LIGHTING

85 El Dorado Economy Path Lighting Die-Cast Aluminum 12 Volt T-4 Hal. LLV121 6" DIA. 16" 22K" SPECIFICATIONS Top, Louver and Husk: Interlocking die-cast aluminum sections, drawn together with three stainless steel screws. Globe: Diffuse glass, threaded to husk, with silicone gasket. Stem: 20 mm aluminum pipe with 20 mm thread for attachment to husk and stake. Stake: Die-cast aluminum, included. Socket: GY6.35 socket for bipin lamp. Wire: 3' #18-2 SPT wire with fork connectors. Lamp: 50-watt T-4 Bipin Halogen lamp included. Finish: Black (BL) powder coat paint only. Certification: UL Listed to U.S. and Canadian safety standards for wet locations. ORDERING INFORMATION Cat. No.* Construction Wattage / Lamp LLV121BL Aluminum 50W T-4 Halogen included MOUNTING OPTIONS Stake Mount Only (included) PHOTOMETRIC DATA See page 102 *Remote transformer required. Available in Value 2-packs only. KIM LIGHTING 83

86 12 Volt Options and Accessories Accessory Application Matrix Transformers: Converts 120 Volts to 12 Volts. Available up to 1000 watts in Above Grade or In-grade models. 120 Volt G.F.C.I. Receptacle with Cover (by others) Above Grade: Available up to 1000 watts in surface mounted models. KLV600 KLV605 KLV620 KLV625 page 88 In-grade: Available up to 500 watts. KLV525 KLV526 KLV530 KLV531 page 89 L" Rigid Conduit (by others) 120 Volts or 277 Volts KLV410 Sealed Connector page 90 Step Light KLV432 # Volt Cable page 90 Accent Light KLV405 Low Voltage Surface Mount page 87 KLV411 Sealed Branch Connector page 90 KLV410 Sealed Connector page 90 Accent/Path Light Rigid Raceway to 96" (by others) per national and/or local code Accent Light KLV400 Spear Mount page 86 KLV410 Sealed Connector page 90 KLV415 Extension Module page 87 Optional Concrete Anchor (by others) KLV410 Sealed Connector page KIM LIGHTING

87 SAFETY AND MAINTENANCE WARNING All transformers must be grounded in accordance with local codes or the National Electrical Code. Failure to take these steps may result in serious personal injury. To maintain light efficiency and prevent fixture overheating, lenses or bare lamps must be kept clean and free of dirt, dust, leaves and trash. Connectors and Cables: These two elements are the backbone of your low voltage system. They are required to withstand exposure to weather and other adverse elements. The Sealed Branch Connector (KLV411) branches the main cable into two runs. The Sealed Connector (KLV410) is used for wiring one fixture to the cable. Kim offers two cable sizes for efficient balancing of the system to minimize voltage drop. The #8 cable (KLV432) is for long runs and heavy loads, while the #12 cable (KLV427) is for shorter runs and light loads. KLV410 Sealed Connector page 90 Step Light Path Light KLV432 # Volt Cable page 90 EP17 Landscape Light Post page 86 In-grade Light KLV410 Sealed Connector page 90 NOTE: 120 Volt mounting accessories can also be used to hard mount 12 Volt fixtures, see page KLV410 Sealed Connector page 90 KIM LIGHTING 85

88 12 Volt Options and Accessories Mounting Options See individual fixtures for availability and limitations. EP17 Landscape Light Post by Engineered Products Co. PVC fixture molded in black with K" NPT mount is corrosion free and UV resistant. Replaces EMT, conduit connectors and weatherproof boxes. 100% shatter resistant against denting and cracking. Angled bottom to eliminate cable congestion. 17K" post length K" NPT Fixture Mount 3J" DIA. 1" 2J" Cable Opening 17K" 3K" 5" K" NPSM Fixture Mount 2L" DIA. 15 1I" 32 Cable 6L" Slot Optional Concrete (By (by others) Others) KLV400 LOW VOLTAGE SPEAR MOUNT Die-cast low copper aluminum with K" NPSM fixture mount. Stainless steel set screw locks fixture into mount. Cable slot allows easy fixture mounting before or after installation in ground. Super TGIC powder coat paint over clear anodizing and Titanated Zirconium conversion. Specify finish: BL - Black, DB - Dark Bronze, GR - Verde Green Cat. No. - Example: KLV400DB Spear Mounting in Concrete In addition to soil mounting, the KLV400 can be installed in a concrete footing for added stability and permanence. 86 KIM LIGHTING

89 12 Volt Options and Accessories Mounting Options See individual fixtures for availability and limitations. K" NPSM Fixture Mount Plan Side 2J" DIA. Cable Slot 1K" KLV405 LOW VOLTAGE SURFACE MOUNT Die-cast low copper aluminum with K" NPSM fixture mount. Stainless steel set screw locks fixture into mount. Two holes provided for flat head wood screws. Super TGIC powder coat paint over clear anodizing and Titanated Zirconium conversion. Specify finish: BL - Black, DB - Dark Bronze, GR - Verde Green Cat. No. - Example: KLV405DB K" NPSM Fixture Mount K" NPSM Nipple 1D" DIA. 9J" KLV415 EXTENSION MODULE For raising fixtures to a height above foliage for efficient and unobstructed operation. Constructed of 1D" diameter extruded aluminum with die-cast ends. K" NPSM female thread on one end, and other end has a K" NPSM solid brass nipple. Stainless steel allen head set screw locks fixture onto mount. Super TGIC powder coat paint over Titanated Zirconium conversion. Two modules may be stacked for additional height. Specify finish: BL - Black, DB - Dark Bronze, GR - Verde Green Cat. No. - Example: KLV415DB KIM LIGHTING 87

90 12 Volt Options and Accessories Volt Variable Voltage Transformers Stainless Steel K" knockouts (3 places) 5C" 15" 5K" KLV watt KLV watt K" knockouts (3 places) 6K" K" knockouts (3 places) 6K" 15" KLV watt 5K" 5K" 3" 7" 3" 7" SPECIFICATIONS ABOVE GRADE TRANSFORMERS Enclosure: Formed 16 ga. stainless steel enclosure with integral hinge. Cover is secured with two stainless steel screws. A through hole is provided in the bottom edge for a padlock (by others). K" knockouts on each side of the enclosure are provided for hardwiring or accessory photocell mounting. Transformer: Core and coil type fully epoxy encapsulated. Output is multi-tap 12V / 13V / 14V / 15V. The 200 and 300-watt units have single circuit output, the 600-watt unit has two circuits for output, and the 900-watt unit has three circuits for output. Variable taps provide flexibility in system design with the 12-volt tap for fixtures near the transformer location and higher voltages for more remote fixtures. Terminal Block: 80-amp euro-style terminal block. Circuit Breaker: 25 amp magnetic circuit breaker (1) per circuit. Cord: Six foot, heavy duty outdoor power cord is provided and installed. Certification: UL Listed to U.S. and Canadian safety standards for wet locations. Photocell Accessory installed on housing. Remote mount also available. Time Clock Accessory plugs into transformer receptacle. NOTE: Output wattage is not to exceed 25 amps on each circuit. Weather conditions must be considered when determining load on transformers, hot weather areas should reduce the output wattage to prevent heat buildup on circuit breakers. The voltage at each fixture must not exceed 12 volt. Load and distance must be considered when determining which voltage tap to use. A good maintenance program is required to replace lamps as they burn out to prevent over-voltage of remaining lamps. 17" KLV watt 3" 8" ORDERING INFORMATION TRANSFORMERS Cat. No. Description Input Cord KLV watt (1) circuit 120V. #18-2 SJTW KLV watt (1) circuit 120V. #18-2 SJTW KLV watt (2) circuits 120V. #18-2 SJTW KLV watt (3) circuits 120V. #12-3 SJTW PHOTOCELL ACCESSORIES Add to transformer for photocell control for on-off function. May be used with time clock accessory. Button type photocell is encased in a plastic enclosure with K" NPT locknut, and washer for mounting direct to enclosure, or remote mount. The cord is provided with a quick-disconnect for ease of installation. The remote mount has a 10' cord. Ordered separately from transformer. Cat. No. Description KLV-PC1 Direct mount to enclosure knockout in right-hand side of transformer enclosure. KLV-PC2 Remote mount with 10' cord for installation in any K" NPT cover plate. (by others). TIME CLOCK ACCESSORY Plugs into transformer for timed control for on-off function. May be used with photocell control. 24-hour time clock is plug-in type with captive trippers. The programming has a resolution of 15 minutes with a manual override. Ordered separately from transformer. Cat. No. Description KLV-TC24 Plug-in time clock plugs into receptacle provided in transformer enclosure. 88 KIM LIGHTING

91 12 Volt Options and Accessories 12 Volt Transformers Cast Aluminum Elevated for drainage in soil or gravel 4C" (111.1 mm) 10" (254.0 mm) O" (21.3 mm) SPECIFICATIONS IN-GRADE TRANSFORMERS Enclosure: Epoxy encapsulated in a stainless-steel burial enclosure and includes all water-tight fittings and hardware. Trans former: Core and coil type fully epoxy encapsulated. (KLV640) 300W toroidal transformer has 120Volt (only) input and a 12V / 13V / 14V / 15V multi-tap output. (KLV660) 300W toroidal transformer has a 120V/277V dual input and a single 12V output. (KLV645) 600W toroidal transformer has a 120V (only) input and a dual 300W 12V / 13V / 14V / 15V multi-tap output. (KLV665) 600W toroidal transformer has a 120V / 277V dual input and a dual 12V output. Variable taps provide flexibility in system design with the 12 volt tap for fixtures near the transformer location and higher voltages for more remote fixtures. Certification: UL Listed to U.S. and Canadian safety standards for wet locations. ORDERING INFORMATION IN-GRADE TRANSFORMERS Cat. No. Description Input KLV watt (1) circuit 120V KLV watt (1) circuit 277V KLV watt (2) circuits 120V KLV watt (2) circuits 277V Note: Output wattage is not to exceed 25 amps on each circuit. Weather conditions must be considered when determining load on transformers, hot weather areas should reduce the output wattage to prevent heat build-up on circuit breakers. The voltage at each fixture must not exceed 12 volt. Load and distance must be considered when determining which voltage tap to use. A good maintenance program is required to replace lamps as they burn out to prevent over-voltage of remaining lamps. KIM LIGHTING 89

92 12 Volt Options and Accessories Cables and Connectors CABLE SIZING FOR KLV500 SERIES TRANSFORMERS 150 watt Transformer TOTAL FIXTURE WATTS MAX. CIRCUIT DISTANCE CABLE SIZE #8-2 # watt 300' 175' 100 watt 150 watt TOTAL 250 watt FIXTURE CABLE watt 100 watt WATTS SIZE 200' 125' MAX. watt # ' CIRCUIT 90' 60' Transformer DISTANCE # ' 150 watt 200 watt 250 watt 200' 75' 150' 60' 100' 50' watt transformer consists of (2) 250 watt branches, requiring a minimum of (2) branch circuit cable runs watt transformer consists of (4) 250 watt branches, requiring a minimum of (4) branch circuit cable runs. KLV427 #12-2 Cable KLV432 #8-2 Cable Cable Installed In-grade Kim Accent or Path Light 12 Volt Cable and Connector Cable Installed In-grade Kim Accent or Path Light 12 Volt Cable and Connector CABLE The greatest benefit of installing a low voltage lighting system is the ability to conceal the flexible electrical cable directly under as little as 6" of soil cover, without the need for conduits or raceways. Voltage drop for KLV500 Series Transformers is a function of cable size, circuit length and connected fixture wattage. In order to attain good lumen output, it is recommended that each fixture be provided a minimum of 10 volts. Use the chart above to estimate the cable size required and maximum circuit distance allowable to maintain 10 volts to the farthest connected fixture on a cable run. NOTE: See page 88 for Variable Voltage Transformers which provide a 12 Volt tap for fixtures near the transformer, and higher voltages for more remote fixtures. Copper stranded landscape cable, black, UL recognized. ORDERING INFORMATION Cat. No. Description KLV ' # Volt Cable KLV ' # Volt Cable 2M" PLAN 12 Volt Cable SIDE 3" PLAN 12 Volt Cable SIDE 1J" 1B" 1L" 1J" KLV410 Sealed Connector KLV411 Sealed Branch Connector CONNECTORS Connectors may be buried, installed at grade, or surface mounted. They are de signed to eliminate the common problem of corrosion and oxidation of the connections, which can cause power interruption. Injec tion molded in black Valox, the two-piece con nec tors have stainless steel screws. The standard Sealed Connector, KLV410, is for connecting one fixture to the cable. The Sealed Branch Connector, KLV411, is for branching the main cable into two runs. The standard connector employs pierc ing screws, and the branch connector utilizes compression type connectors and brass bussbars. All connections are totally sealed and waterproofed with the dielectric mastic provided. Maximum design flexibility is assured since fixtures can be easily added or relocated by installing a new sealed connector. 1. Main 12 Volt cable #8 or #12 2. Brass buss bars 3. Branch cables 4. Fixture cable with fork connectors 5. Connector top 6. Connector bottom 7. Dielectric mastic ORDERING INFORMATION Cat. No. Description KLV410 Sealed Connector KLV411 Sealed Branch Connector 90 KIM LIGHTING

93 12 Volt and 120 Volt Louvers LENSES AND LOUVERS Hex Cell Louvers Provide additional brightness control. Prismatic Lens Softens lamp distribution. Best with flood lamps. Raw flood lamp distribution Spread Lens Creates an oval beam pattern. Best with spot lamps. Raw spot lamp distribution KIM LIGHTING 91

94 120 Volt Options and Accessories Accessory Application Matrix Accent Light J-27N Surface Mount page 96 In-grade Light Accent Light JBR Brass In-grade Architectural Junction Box page 95 SM18 Stanchion Mount page 96 K" Rigid Conduit (by others) K" or L" Rigid Conduit (by others) Rigid Raceway to 96" (by others) per national and/or local code Optional Concrete Anchor (by others) Accent Light K" Rigid Conduit (by others) JBR30 Brass In-grade Staked Junction Box page 95 J-25N Portable Spear Mount page 94 Receptacle with cover (by others) Cord and Plug (Included with Spear Mount) K" or L" Rigid Conduit (by others) 92 KIM LIGHTING

95 SAFETY AND MAINTENANCE WARNING All fixtures must be grounded in accordance with local codes or the National Electrical Code. 120 Volt Portable Spear Mounts using a cord and plug must be plugged into a receptacle protected by a Ground Fault Circuit Interrupter in accordance with the National Electrical Code. Failure to take these steps may result in serious personal injury. To maintain light efficiency and prevent fixture overheating, lenses or bare lamps must be kept clean and free of dirt, dust, leaves and trash. Recessed J-Box (by others) Accent Light JW/JWBR Architectural Wall Mount page 96 Step Light Accent/Path Light Accent/Path Light JB1 Architectural Junction Box page 94 K" Rigid Conduit (by others) EP17 Landscape Light Post page 94 K" Rigid Conduit (by others) JBR32 Brass In-grade Staked Junction Box with Cord page 95 KIM LIGHTING 93

96 120 Volt Options and Accessories Mounting Options See individual fixtures for availability and limitations. K" NPT Fixture Mount 3J" DIA. 1" EP17 Landscape Light Post by Engineered Products Co. PVC fixture molded in black with K" NPT mount is corrosion free and UV resistant. Replaces EMT, conduit connectors and weatherproof boxes. 100% shatter resistant against denting and cracking. Angled bottom to eliminate cable congestion. 17K" post length NOTE: EP17 should be used with a UL listed fixture and grounding means (i.e., third wire) suitable for use in wet locations. x = required depth of conduit per local codes Rigid Conduit (by others) 2J" x 17K" 3K" 5" Rigid Conduit (by others) 3" DIA. K" NPSM Fixture Mount Accent or Path Light High Ground Cover x = required depth of conduit per local codes x 3K" DIA. K" NPSM Fixture Mount 4L" JB1 2J" 6E" JB1 ARCHITECTURAL JUNCTION BOX Die-cast aluminum with K" NPSM fixture mount. Internal set screw provided for locking position. Two K" NPSM in bottom, 17 cu in. internal volume. Super TGIC powder coat paint over clear anodizing and Titanated Zirconium conversion. Specify finish: BL - Black, DB - Dark Bronze, GR - Verde Green Cat. No. - Example: JB1/BL NOTE: May also be used to hard mount low voltage fixtures. Application Notes Elevates Accent Lights above ground cover to prevent foliage from blocking the light. Elevates Path Lights above ground cover to achieve a greater light throw. CAUTION: Junction Box must be installed high enough to avoid contact with soil or standing water. J-25N PORTABLE SPEAR MOUNT Cast iron with K" NPSM fixture mount. Hot dip galvanized finish. 5.5 cu in. splice compartment. (SJTW-A) 3 wire cord and plug. Supplied with (3) wire nuts and (3) mastic seals for waterproofing connections. 9' cord length 94 KIM LIGHTING

97 120 Volt Options and Accessories Mounting Options See individual fixtures for availability and limitations. Accent or Path Light Optional Concrete (by others) x = required depth of conduit per local codes Rigid Conduit (by others) x 3L" DIA. K" NPSM Fixture Mount K" 3" JBR Rock, Bark, Low Ground Cover, etc. JBR BRASS IN-GRADE ARCHITECTURAL JUNCTION BOX Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. Cat. No. Description JBR-2 (2) K" NPT in bottom JBR-3 (2) L" NPT in bottom JBR-21 (2) K" NPT in sides, (2) K" NPT in bottom JBR-24 (4) K" NPT in sides, (2) K" NPT in bottom All side taps provided with plugs. NOTE: May also be used to hard mount low voltage fixtures. 25 Year Limited Warranty: Solid brass junction boxes are warranted for 25 years, from date of sale, against manufacturing defects and failure due to corrosion. Application Notes Creates a flush-mounted appearance. May be cast in concrete for increased stability. CAUTION: Fixture stem and swivel must not contact soil or standing water. Provide drainage away from Junction Box. JBR30 BRASS IN-GRADE STAKED JUNCTION BOX Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. (2) K" NPT in bottom with (2) 19" long brass stakes NOTE: May also be used to hard mount low voltage fixtures. Accent or Path Light x = required depth of conduit per local codes Accent or Path Light JBR30 Rock, Bark, Low Ground Cover, etc. JBR32 Receptacle (by others) JBR32 BRASS IN-GRADE STAKED JUNCTION BOX WITH CORD Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. (SJTW-A) 3 wire cord and plug. Supplied with (3) wire nuts and (3) mastic seals for waterproofing connections. (2) 19" long brass stakes with 9' cord 25 Year Limited Warranty: Solid brass junction boxes are warranted for 25 years, from date of sale, against manufacturing defects and failure due to corrosion. Application Notes Creates a flush-mounted appearance. May be cast in concrete for increased stability. CAUTION: Fixture stem and swivel must not contact soil or standing water. Provide drainage away from Junction Box. K" NPSM Fixture Mount 3L" DIA. Rigid Conduit (by others) x 3K" 19C" 18D" 1" KIM LIGHTING 95

98 120 Volt Options and Accessories Mounting Options See individual fixtures for availability and limitations. K" NPSM Fixture Mount 6" Min. 12" Max. Optional Concrete (by others) 3" DIA. 18" Rigid Conduit (by others) SM18 STANCHION MOUNT 3" O.D. by.188" wall cast aluminum with K" NPSM fixture mount and hand hole with flush cover. Internal set screw fixture lock accessible through hand hole. Internal ground lug supplied with installed lead. Super TGIC powder coat paint over clear anodizing and Titanated Zirconium conversion. Specify finish: BL - Black, DB - Dark Bronze, GR - Verde Green Cat. No. - Example: SM18/DB NOTE: May also be used to hard mount low voltage fixtures. 4K" 2F" 1L" K" NPSM Fixture Mount J-27N SURFACE MOUNT Cast aluminum with K" NPSM fixture mount. Internal set screw provided for locking position. 5 cu in. internal volume. Super TGIC powder coat paint over clear anodizing and Titanated Zirconium conversion. Specify finish: BL - Black, DB - Dark Bronze, GR - Verde Green Cat. No. - Example: J-27N/DB NOTE: May also be used to hard mount low voltage fixtures. J-Box in wall (by others) 5" DIA. K" NPSM Fixture Mount JW ARCHITECTURAL WALL MOUNT Die-cast aluminum with K" NPSM fixture mount. Internal set screw provided for locking position. Canopy attaches to stainless steel wall plate for mounting to any standard electrical outlet box. Super TGIC powder coat paint over Titanated Zirconium conversion. Specify finish: BL - Black, DB - Dark Bronze, GR - Verde Green Cat. No. - Example: JW/DB NOTE: May also be used to hard mount low voltage fixtures. J-Box in wall (by others) 5" DIA. K" NPSM Fixture Mount JWBR BRASS ARCHITECTURAL WALL MOUNT Die-cast brass with K" NPSM fixture mount. Internal set screw provided for locking position. Canopy attaches to stainless steel wall plate for mounting to any standard electrical outlet box. Specify finish: NB - Natural Brass, VG - Verde Green Patina Cat. No. - Example: JWBR/VG NOTE: May also be used to hard mount low voltage fixtures. 96 KIM LIGHTING

99 12 Volt and 120 Volt Photometric Guide Reading Photometric Information ACCENT LIGHTS BEAM SPREAD - 30 Based on photometric tests on each fixture, the data is converted to a beam spread chart to show values as they might be applied to an actual task. Beam spread: This value is as specified by the lamp manufacturer. Beam pattern: The pattern shown is based on the fixture s performance at 50% of the maximum value. This is generally regarded as the most useful beam width that will produce acceptable uniformity of illumination. Initial Footcandles: These values are the illumination levels at the beam center (0 ) at various distances from the fixture. DISTANCE FROM FIXTURE 40' 32' 24' 16' 8' 16' BEAM RADIUS 8' 0' 8' 16' INITIAL FOOTCANDLES AT 0 Bare lamp designation: Specified by the lamp manufacturer. 150PAR38/FL 12 Volt - see pages Volt - see page 104 FLOODLIGHTS, STEPLIGHTS Because floodlights are designed for lighting flat surfaces such as signs, walls, patio decks, etc., an isofootcandle chart which represents either a vertical or horizontal surface is shown with the fixture at a common aiming angle. Initial footcandles appear on the right at specified distances along the surface Volt - see pages Volt - see pages AIMING ANGLE DIAGRAM 6' 6' 42 ISOFOOTCANDLE CHART TYPICAL HALF, 42 AIMING ANGLE 15' 12' 9' 6' 3' 0' 100T4Q/CL EL215 75T4Q/CL 50T4Q/CL Fixture Model and Lamp PATH LIGHTS These fixtures produce a circular pattern of light that is symmetrical about the luminaire. A typical quadrant, or one-quarter of the light pattern, is shown for these fixtures to allow maximum size and readability. The typical quadrant is shown in plan view with the fixture in the lower-right corner. Initial horizontal footcandle values appear on the right at specified distances from the luminaire. HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 6' ' ' ' ' ' 0' 25A19-12V KLV115 50A19-12V Fixture Model and Lamp 12 Volt - see pages Volt - see pages KIM LIGHTING 97

100 12 Volt Photometric Guide MR11 Accent Lighting FOOTCANDLE LEVELS ARE INITIAL UNLESS OTHERWISE NOTED. BEAM SPREAD - 15 BEAM SPREAD ' BEAM RADIUS 4' 0' 4' 8' 4' BEAM RADIUS 2' 0' 2' 4' KLV200 DISTANCE FROM FIXTURE 20' 16' 12' 8' 4' ' INITIAL FOOTCANDLES AT 0 DISTANCE FROM FIXTURE 8' 6' 4' 2' INITIAL FOOTCANDLES AT 0 0' 0' 20MR11/MFL 20MR11/FL DISTANCE FROM FIXTURE 40' 32' 24' 16' 8' BEAM SPREAD - 20 BEAM SPREAD - 30 BEAM RADIUS BEAM RADIUS 16' 8' 0' 8' 16' 8' 4' 0' 4' 8' ' INITIAL FOOTCANDLES AT 0 DISTANCE FROM FIXTURE 16' 12' 8' 4' INITIAL FOOTCANDLES AT 0 0' 0' 35MR11/MFL 35MR11/FL MFL - MEDIUM FLOOD FL - FLOOD 98 KIM LIGHTING

101 12 Volt Photometric Guide MR16 Accent Lighting FOOTCANDLE LEVELS ARE INITIAL UNLESS OTHERWISE NOTED. BEAM SPREAD - 7 BEAM SPREAD - 40 BEAM SPREAD - 8 KLV710 KLV715 KLV720 KLV725 DISTANCE FROM FIXTURE 50' 40' 30' 20' 10' 20' BEAM RADIUS BEAM RADIUS BEAM RADIUS 10' 0' 10' 20' 4' 2' 0' 2' 4' 20' 10' 0' 10' 20' ' ' INITIAL FOOTCANDLES AT 0 DISTANCE FROM FIXTURE 8' 6' 4' 2' INITIAL FOOTCANDLES AT 0 DISTANCE FROM FIXTURE 40' 30' 20' 10' INITIAL FOOTCANDLES AT 0 0' 0' 0' 20MR16/NSP 20MR16/FL 35MR16/NSP BEAM SPREAD - 20 BEAM SPREAD - 40 BEAM SPREAD - 12 BN175 EL170 KLV170 KLV175 BN275 EL270 KLV270 KLV275 DISTANCE FROM FIXTURE 20' 16' 12' 8' 4' 0' 8' BEAM RADIUS BEAM RADIUS BEAM RADIUS 4' 0' 4' 8' 4' 2' 0' 2' 4' 20' 10' 0' 10' 20' ' 14 50' INITIAL FOOTCANDLES AT 0 DISTANCE FROM FIXTURE 8' 22 6' 39 4' 87 2' 350 0' INITIAL FOOTCANDLES AT 0 DISTANCE FROM FIXTURE 35MR16/SP 35MR16/FL 50MR16/NSP 40' 30' 20' 10' 0' INITIAL FOOTCANDLES AT 0 BEAM SPREAD - 25 BEAM SPREAD - 40 BEAM SPREAD - 60 KLV205 8' BEAM RADIUS 4' 0' 4' 8' 8' BEAM RADIUS 4' 0' 4' 8' 4' BEAM RADIUS 2' 0' 2' 4' LLV205 DISTANCE FROM FIXTURE 20' 16' 12' 8' 4' ' 5 10' INITIAL FOOTCANDLES AT 0 DISTANCE FROM FIXTURE 16' ' 14 8' 31 4' 125 INITIAL FOOTCANDLES AT 0 DISTANCE FROM FIXTURE 8' 6' 4' 2' INITIAL FOOTCANDLES AT 0 KLV201 0' 0' 50MR16/NFL 50MR16/FL 50MR16/WFL 0' KLV216 NSP - NARROW SPOT SP - SPOT NFL - NARROW FLOOD FL - FLOOD WFL - WIDE FLOOD KLV160 KLV165 LTV764 LTV766 KLV360 KLV365 KIM LIGHTING 99

102 LED Photometric Guide 6 Emitters FOOTCANDLE LEVELS ARE INITIAL UNLESS OTHERWISE NOTED. LTV767 C736 EL731 Kim Lighting s photometry data for LED luminaires are tested to the IESNA LM standard, and Kim Lighting will only use LEDs that are tested to the IESNA LM standard. Indication that photometric data has been tested using the approved LM method is the use of a negative one (-1) in the lumen output space of the photometric data file. Be aware that other manufacturers may elect to assign a lumen value to the photometric test report after the fact, however any IES report for an LED luminaire with a non-negative lumen value should be considered invalid, and does not follow industry standards established by LM IES files available at Other LED Distribution Patterns (SYM) (ASYM) (ASYM) (WF, FL) (SP) (NF) (NF) SYMMETRIC Bell Stem Bell Scroll Traditional ASYMMETRIC Step Light Round Step Light Rectangle ASYMMETRIC Bell Wall WIDE FLOOD Minivault LIghtvault Micro-Flood Scarab Ravenna SPOT Minivault LIghtvault Scarab NARROW FLOOD Minivault Scarab NARROW FLOOD LIghtvault See page 117 for LED product matrix. 100 KIM LIGHTING

103 12 Volt Photometric Guide Halogen Floodlighting FOOTCANDLE LEVELS ARE INITIAL UNLESS OTHERWISE NOTED. VALUES APPLY TO AIMING ANGLES SHOWN. ISOFOOTCANDLE CHART TYPICAL HALF, 42 AIMING ANGLE FIXTURE 6' FROM SURFACE 15' AIMING ANGLE DIAGRAM 6' 12' 9' 6' ' 42 3' 0' KLV215 20T4Q/CL 35T4Q/CL 50T4Q/CL 75T4Q/CL 12 Volt Photometric Guide Path Lighting FOOTCANDLE LEVELS ARE INITIAL UNLESS OTHERWISE NOTED. HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 3' 5 12 HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 30 AIMING ANGLE 8' 2.4 2' ' 5.0 4' ' ' 0' KLV160 KLV165 20MR16/FL 50MR16/FL 0' KLV170 KLV175 50MR16/VWFL HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 8' HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 8' ' 6' 4' ' ' ' KLV50 KLV55 0' 50MR16/FL ' 8' 9' MOUNTING HEIGHT KLV63 KLV65 0' 50MR16/FL ' 8' 9' MOUNTING HEIGHT KIM LIGHTING 101

104 12 Volt Photometric Guide Path Lighting FOOTCANDLE LEVELS ARE INITIAL UNLESS OTHERWISE NOTED. HORIZONTAL FOOTCANDLE CHART TYPICAL HALF 30" 24" 18" 12" 6" 0" HORIZONTAL FOOTCANDLE CHART TYPICAL HALF 30" " " " " " 6" KLV800 12" 12" MOUNTING HEIGHT 30T4Q/CL 50T4Q/CL KLV810 6" 30T4Q/CL 50T4Q/CL 12" 12" MOUNTING HEIGHT HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 6'.06.1 HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 6' ' ' ' 3' 2' 1' ' 3' 2' 1' ' KLV150 KLV106 30T4Q/CL 30T4Q/CL KLV101 0' 20T4Q/CL 30T4Q/CL HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 6' HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 6'.1.3 5' '.3.9 4' 3' 2' 1' ' 3' 2' 1' KLV115 0' 25A19-12V 50A19-12V LLV121 0' 20T4Q/CL 50T4Q/CL HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 6' HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 12'.02 5' '.03 4' '.11 3' '.38 2' ' 1.9 1' ' 12 0' KLV177/180/185 50MR16 KLV179/182/187 20" 13" MUSHROOM STEM HT. 20" 13" PAGODA STEM HT. 20" 13" CONE STEM HT. KLV10 KLV12 0' 50A19/IF 102 KIM LIGHTING

105 12 Volt and 120 Volt Photometric Guide Path Lighting FOOTCANDLE LEVELS ARE INITIAL UNLESS OTHERWISE NOTED. 12 Volt Lowest Fixture Position HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 6' ' 18" 4' 3' 2' 1' Highest Fixture Position 0' KLV161 20MR16/FL KLV166 50MR16/FL HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 6' " 5' 4' 3' 2' 1' ' KLV161 KLV166 20MR16/FL 50MR16/FL 120 Volt Lowest Fixture Position HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 6' " 5' 4' 3' 2' 1' Highest Fixture Position EL161 BN166 0' 50PAR20/FL 60A19/IF HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 6' " 5' 4' 3' 2' 1' EL161 BN166 0' 50PAR20/FL 60A19/IF KIM LIGHTING 103

106 120 Volt Photometric Guide PAR20/30/38 Accent Lighting BEAM SPREAD - 9 BEAM SPREAD - 16 BEAM SPREAD ' BEAM RADIUS 9' 0' 9' 18' 18' BEAM RADIUS 9' 0' 9' 18' 8' BEAM RADIUS 4' 0' 4' 8' C725 EL720 DISTANCE FROM FIXTURE 45' 36' 27' 18' 9' ' ' INITIAL FOOTCANDLES AT 0 DISTANCE FROM FIXTURE 36' ' ' 9.9 9' 40 INITIAL FOOTCANDLES AT 0 DISTANCE FROM FIXTURE 16' 12' 8' 4' INITIAL FOOTCANDLES AT 0 C735 EL730 0' 0' 0' 50PAR20/SP 50PAR20/NFL 50PAR20/FL BEAM SPREAD - 9 BEAM SPREAD - 16 BEAM SPREAD - 30 C745 EL740 DISTANCE FROM FIXTURE 45' 36' 27' 18' 9' 18' BEAM RADIUS BEAM RADIUS BEAM RADIUS 9' 0' 9' 18' 18' 9' 0' 9' 18' 18' 9' 0' 9' 18' ' ' INITIAL FOOTCANDLES AT 0 DISTANCE FROM FIXTURE 36' ' ' 21 9' 83 INITIAL FOOTCANDLES AT 0 DISTANCE FROM FIXTURE 36' 27' 18' 9' INITIAL FOOTCANDLES AT 0 C24 0' 0' 0' 75PAR30/NSP 75PAR30/NFL 75PAR30/FL BEAM SPREAD - 12 BEAM SPREAD - 30 EL205 EL210 DISTANCE FROM FIXTURE 40' 32' 24' 16' 8' 16 BEAM RADIUS BEAM RADIUS 8' 0' 8 16' 16' 8' 0' 8' 16' ' INITIAL FOOTCANDLES AT 0 DISTANCE FROM FIXTURE 32' 24' 16' 8' INITIAL FOOTCANDLES AT 0 SP - SPOT NSP - NARROW SPOT NFL - NARROW FLOOD FL - FLOOD 0' 0' 150PAR38/SP 150PAR38/FL 1 NOTE: Reduce values shown by 20% for grill louver loss. (C54 only.) BN165 EL160 C14 C15 EL235 EL220 C54 1 LTV KIM LIGHTING

107 120 Volt Photometric Guide Floodlighting FOOTCANDLE LEVELS ARE INITIAL UNLESS OTHERWISE NOTED. VALUES APPLY TO AIMING ANGLES SHOWN. ISOFOOTCANDLE CHART TYPICAL HALF, 42 AIMING ANGLE FIXTURE 6' FROM SURFACE 15' ' ' ' 42 AIMING ANGLE DIAGRAM 6' 6' ' ' EL T4Q/CL 75T4Q/CL 50T4Q/CL ISOFOOTCANDLE CHART TYPICAL HALF, 50 AIMING ANGLE 7x INITIAL FOOTCANDLES AT DISTANCE 6' AIMING ANGLE DIAGRAM 6x ' 5x 4x 3x 2x 1x ' 50 0 F14T5 (2) F14T F24T5HO (2) F24T5HO F17T8 7x x x x x 4x 3x x 4x 3x x 1x x 1x F21T5 (2) F21T F39T5HO (2) F39T5HO F25T8 F28T5 (2) F28T F54T5HO (2) F54T5HO F32T8 KIM LIGHTING 105

108 120 Volt Photometric Guide Path Lighting FOOTCANDLE LEVELS ARE INITIAL UNLESS OTHERWISE NOTED. HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 6'.1.25 HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 30 AIMING ANGLE 8' 2.4 5' 4' ' 5.0 3' 5 6 4' ' 1' ' EL160 BN165 0' 50PAR20/FL 60A19/IF BN175 EL170 0' 50MR16/VWFL HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 8' HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 8' ' 6' 4' ' ' ' AN50 AN55 0' 50PAR20/FL ' 8' 9' MOUNTING HEIGHT AN60 AN65 0' 50PAR20/FL ' 8' 9' MOUNTING HEIGHT 106 KIM LIGHTING

109 120 Volt Photometric Guide Path Lighting FOOTCANDLE LEVELS ARE INITIAL UNLESS OTHERWISE NOTED. HORIZONTAL FOOTCANDLE CHART TYPICAL HALF 30" HORIZONTAL FOOTCANDLE CHART TYPICAL HALF 30" " 18" 12" 6" " 18" 12" 6" " 0" EL800 EL805 EL806 6" 50T4Q/CL 9W TT 12" 12" MOUNTING HEIGHT EL810 EL815 EL816 6" 50T4Q/CL 13W DTT 12" 12" MOUNTING HEIGHT HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 6' HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 12' ' ' ' ' ' ' ' ' ' ' EL150 0' 20T4Q/CL 30T4Q/CL EL105 EL106 0' 75A19/IF 100A21/IF HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 12' HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 6' ' ' ' ' ' ' ' ' ' ' EL120 EL121 0' 100A21/IF 75A19/IF EL115 EL116 0' 40A19/IF 40A19/IF KIM LIGHTING 107

110 120 Volt Photometric Guide Path Lighting FOOTCANDLE LEVELS ARE INITIAL UNLESS OTHERWISE NOTED. HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 12' HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 12' ' ' ' ' ' ' ' ' ' ' PAGODA 0' EL177/180/185 BN179/182/187 60A19/IF 20" 13" 8" STEM HEIGHT MUSHROOM 0' EL177/180/185 BN179/182/187 60A19/IF 20" 13" 8" STEM HEIGHT HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 12' HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 12'.01 10' '.02 8' '.07 6' '.24 4' ' 1.2 2' ' 7.6 CONE 0' EL177/180/185 BN179/182/187 60A19/IF 20" 13" 8" STEM HEIGHT BN10 BR12 0' 40A19/IF HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT 18' ' ' ' ' ' AN30 AR32 0' 60A19/IF 7' 8' 9' MOUNTING HEIGHT HORIZONTAL FOOTCANDLE CHART TYPICAL QUADRANT FIXTURE AT GRADE, LESS SHIELD HORIZONTAL FOOTCANDLE CHART TYPICAL HALF FIXTURE AT GRADE, WITH SHIELD 10' 8' 6' 4' ' 9' 6' 3' ' ' 0' A21/IF W DTT 3' A21/IF W DTT 108 KIM LIGHTING

111 Kim Lighting pioneered Landscape Accent Lightingand its application in Landscape Architectural Design. Accent Lighting can highlight site features, enhance architecture, add drama, and enhance security. Only Kim Accent Lighting combines all of this, with 70 years of leadership experience. Flad & Associates Photo by Steve Hall Hendrich Blessing KIM LIGHTING 109

112 110 KIM LIGHTING

113 Lighting design by Lighting Research Center Students under direction of Janet Lennox Moyer. KIM LIGHTING 111

114 12 Volt Lamp Guide Lamp Watts Type Life Lumens* / Distribution Base Photometric (Hours) Candlepower Page Reference MR11 20MR11/MFL 1 20 HALOGEN cp 15 RM2P/GZ MR11/FL 1 20 HALOGEN cp 30 RM2P/GZ MR11/MFL 1 35 HALOGEN cp 20 RM2P/GZ MR11/FL 1 35 HALOGEN cp 30 RM2P/GZ4 98 MR16 20MR16/NSP 1 20 HALOGEN cp 7 GX MR16/FL 1 20 HALOGEN cp 40 GX5.3 99, 101, MR16/NSP 2 35 HALOGEN cp 8 GX MR16/SP 2 35 HALOGEN cp 20 GX MR16/FL 2 35 HALOGEN cp 40 GX MR16/NSP 2 50 HALOGEN cp 12 GX MR16/NFL 2 50 HALOGEN cp 25 GX MR16/FL 2 50 HALOGEN cp 40 GX5.3 99, 101, MR16/WFL 2 50 HALOGEN cp 60 GX PAR36 36PAR36/VNSP 1 36 HALOGEN cp 5 SCREW TERMINAL PAR36/NSP 1 36 HALOGEN cp 8 SCREW TERMINAL PAR36/WFL 1 36 HALOGEN cp 30 SCREW TERMINAL PAR36/VNSP 1 50 INCANDESCENT cp 5 SCREW TERMINAL PAR36/NSP 1 50 INCANDESCENT cp 8 SCREW TERMINAL PAR36/WFL 1 50 INCANDESCENT cp 30 SCREW TERMINAL 100 T-4 / T-3 20T4Q/CL, 20T3Q/CL 20 HALOGEN lm GY , T4Q/CL, 35T3Q/CL 35 HALOGEN lm GY , T4Q/CL, 50T3Q/CL 50 HALOGEN lm GY , T4Q/CL, 75T3Q/CL 75 HALOGEN lm GY A-19 25A19-12V 25 INCANDESCENT lm MEDIUM A19-12V 50 INCANDESCENT lm MEDIUM 102 *All initial lumen values shown may vary, from one manufacturer to another. Consult lamp manufacturer s data for exact lumen and life data. 1 Data provided is extracted from Philips product information. 2 Data provided is extracted from Sylvania product information. NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local Kim representative. VOLTAGE/LAMP LIFE/CANDLEPOWER The primary reason for limiting voltage drop is to limit light loss. However, as voltage drop reduces light output, it also has the benefit of increasing lamp life. The chart at right shows the effect of voltage drop on lamp life and lamp output. Below 11.0 volts, lamp life increases and candlepower decreases, but not at predictable rates. Voltage at Lamp Life Expectancy % of Rated of Lamp Candlepower 12.0 As Rated Above 100% Times Rated Life 80% Times Rated Life 75% 112 KIM LIGHTING

115 120 Volt Lamp Guide PAR20 PAR30 PAR38 T-4 A-19 A-21 Lamp Watts Type Life Lumens* / Distribution Base Photometric (Hours) Candlepower Page Reference 50PAR20/SP 50 HALOGEN cp 10 MEDIUM PAR20/NFL 50 HALOGEN cp 16 MEDIUM PAR20/FL 50 HALOGEN cp 30 MEDIUM 103, 104, PAR30/NSP 75 HALOGEN cp 10 MEDIUM PAR30/NFL 75 HALOGEN cp 30 MEDIUM PAR30/FL 75 HALOGEN cp 40 MEDIUM PAR38/SP 120 HALOGEN cp 9 MEDIUM PAR38/FL 120 HALOGEN cp 30 MEDIUM T4Q/CL 50 HALOGEN lm BI-PIN 105, T4Q/CL 75 HALOGEN lm MINI-CAN T4Q/CL 100 HALOGEN lm MINI-CAN A19/IF 40 INCANDESCENT lm MEDIUM 107, A19/IF 60 INCANDESCENT lm MEDIUM 106, A19/IF 75 INCANDESCENT lm MEDIUM A21/IF 100 INCANDESCENT lm MEDIUM 107, 108 COMPACT FLUOR. 9W DTT 9 FLUORESCENT lm G W TT 9 FLUORESCENT Im G W DTT 13 FLUORESCENT Im GX T-5 NEW F14T5 14 FLUORESCENT Im MIN. BI-PIN 105 F21T5 21 FLUORESCENT Im MIN. BI-PIN 105 F28T5 28 FLUORESCENT lm MIN. BI-PIN 105 T-5/HO NEW F24T5/HO 24 FLUORESCENT Im MIN. BI-PIN 105 F39T5/HO 39 FLUORESCENT Im MIN. BI-PIN 105 F54T5/HO 54 FLUORESCENT lm MIN. BI-PIN 105 T-8 NEW LED NEW F17T8 17 FLUORESCENT Im T-8 BI-PIN 105 F25T8 25 FLUORESCENT Im T-8 BI-PIN 105 F32T8 32 FLUORESCENT lm T8 BI-PIN Emitters Ring 6 LED ~ cp 100 *All initial lumen values shown may vary, from one manufacturer to another. Consult lamp manufacturer s data for exact lumen and life data. NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local Kim representative. KIM LIGHTING 113

116 Safety & Maintenance 1. Fixtures must be grounded in accordance with local codes or the National Electrical Code. Failure to do so may result in serious personal injury. 2. Extreme caution should be taken when fixtures are used in paved areas. High temperature lenses can burn feet, hands or objects inadvertently placed on top of fixtures. If fixtures must be used in paved areas, locate them away from normal pedestrian traffic, and use the lowest wattage lamp possible. 3. It is recommended that all conduit entries be sealed with RTV silicone to maintain a clean, dry splice compartment. 4. To maintain light efficiency and prevent fixture overheating, lenses must be kept clean and free of dirt, dust, leaves and trash. 5. Lightvault fixtures are not approved for any submersible installations including fountains, ponds, reflecting ponds or swimming pools. 114 KIM LIGHTING

117 KIM LIGHTING LIMITED WARRANTY When installed in accordance with Kim Installation Instructions and accepted trade practices, the following shall apply: General Product Limited Warranty Coverage All material and component parts used in the manufacture of Kim Products, are warranted to be free from defects of material and/or workmanship for a period of 1 year from date of sale, with the following exceptions: Auxiliary Equipment All auxiliary equipment (such as lamps, ballasts, and transformers) provided by and/or included in Kim Products shall carry the component manufacturer s warranty. Copper and Bronze Landscape Components Copper and bronze landscape fixture components shall be warranted against defects of material and/or workmanship, and failure due to corrosion, for a period of 25 years from date of sale. Composite In-Grade Components Composite In-Grade fixture components installed below grade, shall be warranted against defects of material and/or workmanship, and failure due to corrosion, for a period of 7 years from date of sale. Aluminum Landscape Components Aluminum Landscape fixture components not in direct contact with soil, shall be warranted against defects of material and/or workmanship for a period of 3 years from date of sale. Aluminum fixture components in direct contact with soil shall be warranted from defects of material and failure from corrosion for a period of 1 year from date of sale. Limit of Liability and General Conditions Only products which are installed, used and maintained in accordance with applicable Kim instructions, specifications and accepted trade practices, are covered by the Kim Warranty. During the warranty period, with proof of purchase, Kim will repair or replace with the same or similar product, at Kim s option, without charge. Labor costs are the owner s responsibility and are excluded from this warranty. This warranty is void if the product is modified, tampered with, misapplied, poorly installed, improperly maintained, or subjected to abnormal conditions. Repair or replacement as provided under this warranty is the exclusive remedy of the purchaser. This warranty is in lieu of all other warranties, expressed or implied, including any implied warranty of fitness for a particular application. Kim Lighting shall not be liable to the purchaser for indirect or consequential damages East Gale Avenue City of Industry, California PHONE 626 / FAX 626 / KIM LIGHTING 115

118 LANDSCAPE 12 / 120 VOLT 12 Volt / 120 Volt Landscape C O M P R E H E N S I V E C A T A L O G

119 Alphanumeric Index Cat. No. Page Cat. No. Page Cat. No. Page EL177/H70 66 KLV EL177/H80 66 KLV EL180/H60 66 KLV EL180/H70 66 KLV EL180/H80 66 KLV AN30 71 EL185/H60 66 KLV AN50 58 EL185/H70 66 KLV AN55 58 EL185/H80 66 KLV AR32 71 EL KLV BN10 70 EL KLV BN EL KLV177/H60 66 BN EL KLV177/H70 66 BN EL KLV177/H80 66 BN179/H60 64 EL KLV179/H60 64 BN179/H70 64 EL KLV179/H70 64 BN179/H80 64 EL KLV179/H80 64 BN182/H60 64 EL KLV180/H60 66 BN182/H70 64 EL KLV180/H70 66 BN182/H80 64 EL KLV180/H80 66 BN187/H60 64 EL KLV182/H60 64 BN187/H70 64 EL KLV182/H70 64 BN187/H80 64 EL KLV182/H80 64 BN EL KLV185/H60 66 BR12 70 EL KLV185/H70 66 C14 32 EP17 86, 94 KLV185/H80 66 C15 32 J-25N 94 KLV187/H60 64 C24 22 J-27N 96 KLV187/H70 64 C54 41 JB1 94 KLV187/H80 64 C JBR-2 95 KLV C JBR-3 95 KLV C JBR KLV C JBR KLV EL JBR30 95 KLV EL JBR32 95 KLV EL JW 96 KLV EL JWBR 96 KLV EL KLV-PC1 88 KLV EL KLV-PC2 88 KLV EL KLV-TC24 88 KLV EL KLV10 70 KLV EL KLV12 70 KLV EL KLV50 58 KLV EL177/H60 66 KLV55 58 KLV Cat. No. Page KLV KLV KLV KLV KLV KLV KLV KLV KLV KLV KLV KLV KLV KLV KLV LLV LLV LTV LTV LTV LTV SM18 96 NOTE: Louvers, lens options, and other optical control accessories are luminaire specific, and are shown on their related fixture pages. 116 KIM LIGHTING

120 kimlighting the next generation of landscape lighting FIXTURE NAME MODEL NO. DISTRIBUTION SYSTEM WATTS VOLTAGE DIMMING ALUMINUM BRASS Step light round Step light rectangle Minivault KLV817 EL817 KLV807 EL807 KLV361 KLV366 LTV765 LTV767 LTV768 ASYM ASYM ASYM ASYM WF WF WF SP, NF WF 3.6W, 10.8W 3.6W, 10.8W 3.6W, 10.8W 3.6W, 10.8W 3.6W 3.6W 3.6W 7.2W 3.6W, 10.8W 12V UV 12V UV 12V 12V 12V 120V UV R R R R I I i I i X X X X X X X X X MicroFlood KLV217 EL217 WF WF 3.6W 3.6W, 10.8W 12V UV I I X X Lightvault Scarab LTV71 LTV72 LTV73 KLV721 KLV726 EL731 EL732 EL733 C736 C737 C739 NF, SP, WW NF, SP, WW SP WF WF SP NF WF SP NF WF 22.9W 22.9W 22.9W 3.6W 3.6W 7.2W 7.2W 3.6W, 10.8W 7.2W 7.2W 3.6W, 10.8W UV UV UV 12V 12V UV UV UV UV UV UV I I I R R I I I I I I X X X X Composite Housing Composite Housing Composite Housing X X X X KLV176 FL 3.6W 12V R X Ravenna Highlighter KLV171 EL171 FL FL 3.6W 3.6W 12V UV R R X X BN176 FL 3.6W UV R X Ravenna Lowlighter Traditional Bell Wall Bell Stem KLV276 KLV271 EL271 BN276 KLV188 KLV189 EL188 BN189 KLV190 KLV192 EL190 BN192 KLV195 KLV197 EL195 BN197 KLV52 KLV57 AN52 AN57 KLV162 KLV167 EL167 BN167 FL FL FL SYM SYM SYM SYM SYM SYM SYM SYM SYM SYM SYM SYM ASYM ASYM ASYM ASYM SYM SYM SYM SYM 3.6W 3.6W 3.6W 3.6W 3.6W 3.6W 3.6W 3.6W 3.6W 3.6W 3.6W 3.6W 3.6W 3.6W 3.6W 3.6W 3.6W 3.6W 3.6W, 10.8W 3.6W, 10.8W 3.6W 3.6W 3.6W, 10.8W 3.6W, 10.8W KLV163 SYM 3.6W 12V R X Bell Scroll KLV168 SYM 5W 12V R EL168 SYM 3.6W, 10.8W UV R X BN168 SYM 3.6W, 10.8W UV R UV = Universal Voltage from V with a ± 10% tolerance; I = Integral Dimming Control Device; R = Remote Control Line Dimmer Kim's LED Landscape Product Matrix is for reference only. Specifications are subject to change. For complete LED product specification details and ordering information, request Kim Lighting s 24-page All-Inclusive LED catalog or download the PDF version at: 12V 12V UV UV 12V 12V UV UV 12V 12V UV UV 12V 12V UV UV 12V 12V UV UV 12V 12V UV UV R R R R R R R R R R R R R R R R I I I I R R R R X X X X X X X X X X X X X X X X X X X X X X X X X X

121 12 Volt / 120 Volt Landscape Because of a continuing product improvement program, Kim Lighting reserves the right to change specifications without notice. How may we serve you better? Let us know by visiting our web site at: Your input is valuable to us.