DICKEY-john Sales DICKEY-john Technical Support

Transcription

1 5200 DICKEY-john Road Auburn, IL DICKEY-john Sales DICKEY-john Technical Support DICKEY-john Corporation Part Number

2 WELCOME TABLE OF CONTENTS Controllers...4 Application Sensors...22 Anhydrous Control Accessories...24 Liquid Control Valves...26 Hydraulic Control Valves...29 Flow Meters...30 Introduction The world s precision agriculture leader DICKEY-john s industry-leading precision ag electronics continue to meet the challenges today s producers face. Built on innovation and accuracy, our world-class solutions handle farming s toughest demands: Customers on six continents depend on our precision products to perform in the most rugged environments. In-house manufacturing and an on-site engineering team help us maintain that DICKEY-john standard of quality. Planter/Grain Drill/Air Cart Monitors...32 Seed & Flow Sensors...50 Other Sensors...51 Flow Meters...52 Ground Speed Sensing...54 Moisture Testing Testers...56 Accessories...68 Table of Contents IntelliAg with Trimble AgGPS AutoSteering the first complete precision agriculture package mini GAC award-winning handheld moisture tester that delivers grain trade accuracy Ag industry s first successful planter monitor ISO 9001 quality certified one of the industry s first When you buy DICKEY-john, you re making an investment in the future of your operation. Because DICKEY-john products solve not only today s needs but also tomorrow s challenges. Soil Compaction Testing...70 Diagnostics...72 Index Introduction Table of Contents 3

3 LAND MANAGER CONTROL SYSTEMS LAND MANAGER CONTROL SYSTEMS Land Manager SE Land Manager Land Manager II Economical application control Versatile application control The smartest application control Single channel Single channel Dual channel Easy 1-button setup Variable rate application control Spray and spread with 1 console Incredibly simple, amazingly accurate Land Manager control systems make precision chemical and fertilizer application easy. They re versatile to suit your business all operate in English or metric modes and in a variety of commonly used languages without reprogramming. Password protection is standard on each unit to limit access to configuration programming setup. And, each is equipped with speed/area and distance monitoring modes and controls proportional, hydraulic, servo, and electric drives. Rate (flow or pressure) Boom section configuration Speed Channel label Area Up to 6 boom inputs Digital accessory input (hopper level, fan RPM, or vapor detector) Product-level monitoring Non-volatile memory retains settings when disconnected from battery Application library stores up to 10 configurations Creates and logs up to 10 individual reports Standard RS232 interface link Records tank fill (with optional flow meter) Automatic pump shutoff Auto gain tunes responsiveness to application Variable rate application control for 2 channels Application library stores up to 10 configurations Creates and logs up to 10 individual reports Standard RS232 interface link Records tank fill (with optional flow meter) Automatic pump shutoff Auto gain tunes responsiveness to application Land Manager units offer up to two channels of variable rate application control when connected to a precision farming software GPS package. They are available for flow or pressurebased systems whether you re running liquid, granular, or anhydrous ammonia systems, this versatile family of products has what you need. DID YOU SELECT YOUR Pressure sensor or flow meter (page 22, 30) Control valve (page 26-29) NH3 kit (page 24) Ground speed sensor (page 54) CUSTOMERS WHO BUY LAND MANAGER ALSO BUY THESE CONVENIENT ACCESSORIES: Hopper level sensor precise material level readings Hall effect sensor cost-effective shaft revolution monitoring Application rate sensor precise granular application monitoring Boom control module manual control of up to six boom sections 4 5

4 CCS100 APPLICATION CONTROLLER CMS100 APPLICATION MONITOR The most affordable spray monitoring The CMS100 delivers cost-effective ground speed, area count, and application monitoring, with the precision you expect from DICKEY-john. The most cost-effective application control For precise custom application control that pays back quickly, get the CCS100. This compact, easy-to-use unit gives you maximum control over the gallons or pounds per acre of liquid, granular, or anhydrous material you apply, even with ground speed changes. And, adjust application rates in the field thanks to a simple 3-button control panel and a high-speed valve that opens and closes in less than 2 seconds. The CCS100 gives you all that and more: Dual digital readout of pressure and gallons per acre Dual digital readout of pounds per hour and pounds per acre Compact size maximizes cab space Plugged nozzle indicator English or metric versions available Information preserved even with power loss For a complete liquid, granular, or anhydrous application control and monitoring package, pair the CCS100 with the CMS100. Three touch switches make setup easy. The CMS100 automatically calibrates ground speed simply drive a measured course to set the speed constant. Use the CMS100 to monitor: Ground speed Field area Total accumulated area Area per hour Distance traveled Products applied by field Total product applied Product remaining Spray bar pressure Application rate The unit retains information even in the event of power failure, and English and metric versions are available. Use it alone for accurate liquid, granular, or anhydrous application monitoring, or pair it with the CCS100 for a complete application control package. DID YOU SELECT YOUR CUSTOMERS WHO BUY THE CCS100 ALSO BUY THESE CONVENIENT ACCESSORIES: DID YOU SELECT YOUR CUSTOMERS WHO BUY THE CMS100 ALSO BUY THESE CONVENIENT ACCESSORIES: Pressure sensor (page 22) CMS100 economical liquid, granular, and anhydrous application monitoring Ground speed sensor (page 54) CCS100 economical liquid, granular, and anhydrous application control NH3 kit (page 24) Flow meter spray flow rate and plugged nozzle monitoring Pressure sensor or flow meter accurate liquid application measurement Control valve (page 26-29) Hopper level sensor precise material level readings Hopper level sensor precise material level readings Ground speed sensor (page 54) Boom control module manual control of up to six boom sections Hall effect sensor cost-effective shaft revolution monitoring Application rate sensor precise granular application monitoring 6 7

5 INTELLIAG INTELLIAG The world s most versatile controller IntelliAg puts the future of application control in your cab, providing state-of-the-art communication between implement and tractor. This precision farming system monitors and controls with just one terminal, eliminating the need for multiple controllers. BENEFITS Because IntelliAg is designed to the ISO standard, it is interchangeable with other manufacturers compatible equipment. Use IntelliAg with: Sprayers Fertilizer spreaders Anhydrous bars Planters Air carts (strip till/seeding) Standard electrical connector at hitch for convenient plug and play installation Lower equipment cost no need for different controllers for different farm applications Off-the-shelf ISO conformance allows for quick retrofitting to tractors and implements Only one terminal to learn Full screen alarms identify abnormal or failed operation on all enabled system components/controls Control hydraulic valves (pulse-width modulated and servo) Reduce wiring and harnessing Monitor up to 196 rows of seeding Monitor hopper level, air pressure, and shaft speed Retain information even in power failure Variable rate application Log as applied data 8 9

6 INTELLIAG INTELLIAG Tractor Electronic Control Unit (ECU) A tractor ECU is required when using an IntelliAg 10 inch terminal. It manages the power on the CAN BUS and accessory sensor inputs connected to the tractor cab harness, such as ground speed. Cab/Power Harness Diagram Terminal Virtual terminal (ISO compatible) 10 inch color touch screen Video display (connect to optional camera) Backlight and audible alarm adjustment SD card slot allows for saving of configuration files, as applied data, and prescription application Generates as covered maps 4 channel variable rate prescription Compatible with GPS receiver/nema Interface with Trimble AgGPS Autopilot steering INTELLIAG 10 INCH COLOR TOUCH SCREEN 10 11

7 INTELLIAG INTELLIAG Anhydrous System Diagram Anhydrous Control The IntelliAg anhydrous (NH3) control system provides automatic ground speed control for the application of anhydrous ammonia only. The system is capable of up to 2 independent channels of control for better utilization of anhydrous application on large tool bars. This allows the tool bars to be split in half and vary the rate of each section while traveling through the field. ISO Hitch Connect to Cab Harness WSMTII-NH3 CONTINENTAL 9,600 LBS./HR. TTM BENEFITS AND FEATURES 2 channels of anhydrous ammonia control Prescription variable rate Log as applied data Generate as covered map Can be connected with ISO VT already in tractor: John Deere Case IH AGCO S1 Not Used WSMT II Module Anhydrous Control NH3 Flow Meter Sensor Feedback NH3 Servo Valve Implement Lift Sensor Fan/Shaft RPM Sensor X CAN Hitch Extension Anhydrous Control Module Harness Connect to next module harness or implement extension harness (Connect CAN terminator if this is the last module on the CAN bus) 2 Channel Control Harness Radar Speed Sensor 12 13

8 INTELLIAG INTELLIAG Sprayer System Diagram Sprayer Control The IntelliAg sprayer control system (LIQIV) is designed with features tailored specifically for self-propelled liquid sprayers. The control system can use either pressure sensor or flow meter feedback of liquid flow rate and works with a wide range of liquid servo control valves or hydraulic control valves. It includes 4 channels of liquid control and inputs for auxiliary sensors such as liquid pressure, shaft RPM, and 7 boom shutoff inputs. WSMTII-LIQIV BOOM SHUTOFF MODULE (BSM) Boom Output Module The boom output module is required for control of boom shutoff section valves S Liquid Acc. Harness Liquid Pressure Sensors x 4 Labeled LIQ PRESSURE 1 - LIQ PRESSURE S1 Flow Meter Sensor Feedback PWM Solenoid Valve Fan/Shaft RPM Sensors x 2 Labeled RPM 2 - RPM 3 7 Boom Sense Wires Liquid Servo Control Valve WSMT II Module Liquid Control WSMT Liquid Accessory Harness ISO Hitch X CAN Hitch Extension Harness Liquid Control Module Harness Connect to next module harness or implement extension harness (Connect CAN terminator if this is the last module on the CAN bus) 4 Channel Control Harness Connect to Cab Harness From Previous Module Harness or Extension Harness BENEFITS AND FEATURES 4 independent liquid control channels Prescription variable rate Log as applied data Generate as covered map Monitor up to 7 boom shutoff inputs, 2 shaft RPM, and 4 liquid pressure Implement Lift Sensor Fan/Shaft RPM Sensor Radar Speed Sensor Implement CAN Extension Harness (Optional Lengths) Boom shutoff module (BSM) available to control up to 24 boom on/off shutoff valves 6 Boom Shutoff Harness S1 WSMB Output Module Connects to Boom Solenoids 14 15

9 INTELLIAG INTELLIAG Granular System Diagram Spreader Control The IntelliAg granular spreader control system (GCIV) is designed with features tailored specifically for self-propelled granular spreaders. The control system uses a 360 pulse per revolution feedback sensor. This mounts on the shaft of the granular material delivery system to provide the most accurate information on the granular material being applied. The system includes 4 channels of granular control and inputs for auxiliary sensors such as hopper level, shaft RPM, gate height, and 5 air boom shutoff inputs. WSMTII-GCIV BOOM SHUTOFF MODULE (BSM) Boom Output Module The boom output module is required for control of air boom shutoff section S Granular Acc. Harness Gate Height Sensors 1-4 Hopper Level Sensors x 2 Labeled HOPPER 2 - HOPPER 3 5 Boom Sense Wires S1 Application Rate Sensor Feedback Fan/Shaft RPM Sensors x 2 Labeled RPM 2 - RPM 3 WSMT II Module Spreader Control Connect to Cab Harness X CAN Hi tech Extension Harness Spreader Control Module Harness Connect to next module harness or implement extension harness (Connect CAN terminator if this is the last module on the CAN bus) From Previous Module Harness or Extension Harness BENEFITS AND FEATURES 4 independent granular control channels Prescription variable rate Log as applied data Generate as covered map PWM Solenoid Valve Hopper Level Sensor Servo Valve 4 Channel Control Harness Implement CAN Extension Harness (Optional Lengths) Monitor up to 5 boom shutoff inputs, 2 shaft RPM, 2 bin level, and 4 gate height sensors Boom shutoff module (BSM) available to control up to 24 boom on/off shutoff valves Fan/Shaft RPM Sensor 6 Boom Shutoff Harness Radar Speed Sensor S1 WSMB Output Module Connects to Boom Solenoids 16 17

10 INTELLIAG INTELLIAG IntelliAg now available with Trimble AgGPS AutoSteering 1 inch repeatability from plant to harvest any field pattern IntelliAg equipped with the Trimble AgGPS AutoSteering guidance system extends your operating hours, so you can work when you need to and maximize the precision of your rows. AutoSteering Screen Operator view of AutoSteering screen on IntelliAg terminal 18 ENABLED Inch Color Touch Screen Terminal 4 channels of variable rate control Coverage maps with paint-over prescription maps Prescription variable rate maps GPS receiver with NEMA output AgGPS 252 Receiver with AgGPS 900 Radio Multiple options for GPS corrections including WAAS, OmniSTAR, and RTK AgGPS 900 radio (optional) provides +/-1 inch pass-to-pass, year-to-year accuracy using RTK corrections AgGPS NavController II Using data from the GPS receiver and internal sensors, the AgGPS NavController II sends precise instructions to the steering control system T3 technology continually corrects for roll, pitch, and yaw by using state-of-the-art 6-axis solid state inertial sensors to give you a true on-ground position Plug and play into most guidance ready vehicles GPS, GLONASS, and RTK Base Station RTK GPS Networks Control Valve Receives electrical signals from the AgGPS NavController II Converts signals to precise hydraulic commands that the vehicle s steering system uses to keep the vehicle on path AgGPS AutoSense Steering Sensor Unique in-a-box steering sensor Measures highly accurate wheel angle information on all terrain Patent-pending technology Obtains information without the use of moving parts or linkages Uniquely combines a GPS receiver, RTK radio, and 10-hour battery into one small unit for quick setup Automatically assigns a previously set point with Autobase technology Rugged and weather proof Trimble RTK networks currently cover more than 130 million acres of North American farmland, so you may have a network covering your area. A network consists of a number of fixed RTK base stations that independently broadcast RTK correction signals so the vehicle can obtain sub-inch accuracy. Contact a local Trimble reseller to manage an RTK network in your area RTK fees may apply for network usage. Continuously sends that information to the AgGPS NavController II 18 19

11 INTELLIAG INTELLIAG Variable Rate Application After loading selected prescription stored on the SD card, the variable rate map will be displayed on the terminal. During the application of prescribed materials, an as covered map is displayed over the prescription map. Note: Farm prescription software must be compatible with FODM applications. Examples: Farm Works version 12, SGIS software, GTA Software Suite, Map Shots, Ag Leader SMS INTELLIAG 10 INCH COLOR TOUCH SCREEN LOAD SELECTED TASK START AND STOP TASK. AS COVERED 20 21

12 APPLICATION SENSORS APPLICATION SENSORS Application Rate Sensor Hall Effect Sensor Measures shaft rotation speed Outputs at 360 pulses per revolution for increased accuracy RPM range 2-2,500 Easily adapts to 1 and 1 1/4 in. diameter shafts 12 volt sensor with square-wave signal output Liquid Pressure Sensor Measures psi liquid pressure Can be used as alternative to flow meter in Land Manager or CCS100 liquid sprayer control systems Reads liquid pressure at nozzle on spray bar Prevents over-application caused by single nozzle clogs Air Pressure Sensor Measures air pressure in seed hopper Measures rotational shaft speed and ground speed Available in threaded or smooth surfaces for convenient mounting 12 volt sensor with square-wave signal output Detects teeth of sprocket, magnets, lug nuts, etc. Implement Lift Switch Enables or disables implement function Attaches to 3-point hitch or lift cylinder Ties to planter monitors and control systems Hopper Level Sensor Mounts inside planter, drill, or air cart Alerts when seed or granular material reaches low level 22 23

13 ANHYDROUS CONTROL ACCESSORIES ANHYDROUS CONTROL ACCESSORIES Boom Controller Controls 6 boom sections Includes master boom shutoff switch Provides pressure regulation with control valves Continental Magnum Equalizer NH3 Heat Exchanger System/Kit Allows faster runs at lower tank pressures Attain flow rates up to 9,600 lb./hr. Standard 1 1/4 in. plumbing Compatible with N-Serve nitrogen stabilizer Interchangeable orificed hose barbs for constant 2% or less vapor bleed off IMPORTANT! To ensure the highest possible flow rates, your applicator plumbing must be sized properly. The following is a guideline for transfer of NH3 from the nurse tank to the applicator. LBS./HR...PLUMBING SIZE 0-3, in. feed line and breakaway 3,600-6, /4 in. feed line and breakaway CONTINENTAL MAGNUM EQUALIZER NH3 SYSTEM FLOW RATES All maximum flow rates listed are at 110 psi tank pressure. To account for application in cold conditions where tank pressures will be significantly lower, use the following conversion when sizing an NH3 system. Approximately 1/3 of the total system capacity is lost at 1/2 of the tank pressure. Example: 42.5 ft. x 6 mph x 200 lbs. NH3 x = 6,181 lbs./hr. 6,181 lbs./hr. x = 8,251 lbs./hr. Based on the calculation above, you would need a system with at least 8,251 lbs./hr. capacity to put on the required amount at 55 psi tank pressure or in this instance, a DICKEY-john/ Continental system rated at 9,600 lbs./hr. maximum flow rate. NH3 OR GRANULAR FLOW RATE FORMULA To calculate NH3 flow rates (lbs./hr.) so you can select the appropriate heat exchanger kit and valve size, use the following formula: Applicator width x speed x application rate (gpa) x Example: 42.5 ft. x 6 mph x 200 lbs. NH3 x = 6,181 lbs./hr. NH3 KIT ANHYDROUS AMMONIA FLOW RATE CHART Heat Exchanger Kit Maximum Flow Rate Single TTU 4,200 lbs./hr. Single TTU 5,500 lbs./hr. Double TTU 6,800 lbs./hr. Continental Magnum Equalizer 9,600 lbs./hr. Valve Size 3/4 in. 1 in. 1 in. 1 1/4 in. 6,800 & up...1 1/2 in. feed line and breakaway SINGLE TTU DOUBLE TTU 24 25

14 LIQUID CONTROL VALVES LIQUID CONTROL VALVES Liquid Control Valves Maximum GPM Flow Rate Valve Size Description at 1 psi Drop 3/8 in. 3/8 in. 2-way SS 6 3/8 in. 3-way SS 3 Valve, 3/8 in. 2-way SS Valve, 3/8 in. 3-way SS Maximum GPM Flow Rate Valve Size Description at 1 psi Drop 1.5 in. 1.5 in. 3-way poly in. 3-way SS 34 Valve, 1.5 in. 3-way poly Valve, 1.5 in. 3-way SS 1/2 in. 1/2 in. 2-way SS 30 Valve, 1/2 in. 2-way SS 3/4 in. 3/4 in. 2-way poly 51 3/4 in. 2-way SS 30 (used with NH3 TTU kit) Valve, 3/4 in. 2-way SS Valve, 3/4 in. 2-way poly 1 in. 1 in. 2-way CS 68 (used with NH3 TTU/Cont kit) 1 in. 2-way poly 68 1 in. 2-way SS 68 Valve, 1 in. 2-way CS Valve, 1 in. 2-way poly 3/8 in. 2-way SS 3/8 in. 3-way SS 1/2 in. 2-way SS 3/4 in. 2-way poly 2 in. 2 in. 2-way SS in. 3-way SS 47 Valve, 2 in. 2-way SS Valve, 2 in. 3-way SS 3 in. 3 in. 2-way SS 720 Valve, 3 in. 2-way SS 1.5 in. 3-way poly 1.5 in. 3-way SS 2 in. 2-way SS 2 in. 3-way SS 1 in. 2-way CS 1 in. 2-way poly 3 in. 2-way SS 1 in. 2-way SS 26 27

15 LIQUID CONTROL VALVES HYDRAULIC CONTROL VALVES Maximum GPM Flow Rate Valve Size Description at 1 psi Drop Actuators Actuator assy. (used with Continental 1.25 in. NH3 valve) Actuator assy. Actuator assy. Actuator assy., on/off (used with , 6010, 6020 shutoff valves) Boom Shutoff Valves 3/4 in. single shutoff valve 40 Adapter Brackets Use the following information to help you choose the right Flow Control Valve for your equipment. 3/4 in. 3 bank shutoff valve 38 3/4 in. 5 bank shutoff valve 38 Shutoff valve actuator assy. (used with shutoff valve) Valve & actuator assy., 1 in. single shutoff valve actuator to Continental NH3 valve bracket (used to mount EH2 actuator on Continental 1.25 in. valve) actuator to Continental NH3 valve coupler (used to mount EH2 actuator on Continental 1.25 in. valve) LIQUID FLOW CONTROL VALVE SIZES Valve Size Flow Rate 3/8 in. 2-way SS 6 gpm 3/4 in. single shutoff valve 3/4 in. 3 bank shutoff valve 3/4 in. 5 bank shutoff valve Valve Size Flow Rate 1.5 in. 3-way poly 47 gpm Proportional Hydraulic Flow Control Valves Available in 4 and 8 gpm sizes Operating pressure inlet 3,500 psi (240 bar) Regulated flow rate 0-4 gpm (0-15 lpm), 0-8 gpm (0-30 lpm), and 0-24 gpm (0-90 lpm) Reverse free flow cracking pressure psi (1-1.4 bar) Internal leakage 0.10 gpm (0.38 lpm) at zero current Coil voltage 12 VDC Maximum control current of 1,500 ±100 ma Servo Hydraulic Flow Control Valves For precise oil flow to hydraulic-driven conveyors and liquid pumps Control hydraulic flow from 4 to 58 gpm Variety of sizes available HD 4180 All in One Hydraulic Motor & Valve Assembly 0-4 gpm hydraulic flow delivers RPM at 1,400 inch pounds of torque Eliminates ground drive system to rotate seeding shafts Install up to four units in series to control multiple planter sections or fertilizer application Interface with ground speed control systems for variable rate planter and fertilizer application control Manual override of hydraulic flow in the event of electrical failure LIQUID FLOW RATE FORMULA To calculate liquid flow rates (gpm) so you can pick the correct Flow Control Valve for your application, use the following formula: Width x speed x application rate (gpa) x = gpm Example: 60 ft. x 15 mph x 20 gpa x = gpm 3/8 in. 3-way SS 3 gpm 1/2 in. 2-way SS 30 gpm 3/4 in. 2-way poly 51 gpm 3/4 in. 2-way SS 30 gpm (used with NH3 TTU kit) 1 in. 2-way CS 68 gpm (used with NH3 TTU/Cont kit) 1 in. 2-way poly 68 gpm 1 in. 2-way SS 68 gpm 1.5 in. 3-way SS 34 gpm 2 in. 2-way SS 376 gpm 2 in. 3-way SS 47 gpm 3 in. 2-way SS 720 gpm 3/4 in. single shutoff 40 gpm 3/4 in. 3 bank shutoff 38 gpm 3/4 in. 5 bank shutoff 38 gpm 28 29

16 FLOW METERS FLOW METERS Flow Meters Available in poly or stainless steel to meet your spraying needs Use the following information to help you choose the right Flow Meter for your equipment. 1/2-2 in. poly flow meter assemblies include: Flow meter body with turbine, axle, and bearings Hall effect sensor with 3-pin weather pack connector Hose barbs for inlet and outlet Viton O-rings Coupling nuts 3-4 in. poly flow meter assemblies include: Flow meter body with turbine, axle, and bearings Hall effect sensor with 3-pin weather pack connector Flanges with Viton O-rings for inlet and outlet Flat flanges (no O-rings) LIQUID FLOW RATE FORMULA To calculate liquid flow rates (gpm) so you can pick the correct Flow Meter for your application, use the following formula: Width x speed x application rate (gpa) x = gpm Example: 60 ft. x 15 mph x 20 gpa x = gpm LIQUID FLOW METER SIZES Flow Meter Flow Rate 1/2 in gpm 3/4 in gpm 1 in gpm 1 1/2 in gpm 2 in gpm 3 in gpm 4 in gpm 30 31

17 PM SERIES PLANTER MONITORS PM SERIES PLANTER MONITORS World-class precision plus flexible monitoring For incredible versatility and unsurpassed accuracy, choose the PM Series of planter monitors. With models to monitor as few as 1 row or as many as 36 rows simultaneously, this series has what you need to optimize planting and minimize skips and misses. PM Series planter monitors offer: Row and ground speed monitoring Area and population count Customizable features for advanced operation Multiple seed flow display options bar graphs, gauges, flashing bar segments, text enlargement PM100 and PM100E Economical planter monitoring 1- to 16-row monitoring Automatic sensor to detect seed flow LED row indicators Multiple row failure indicator options PM200 and PM200E Easy, affordable planter monitoring 12-row monitoring Speed/area monitoring Implement population average (200E) PM300 The next level in planter monitoring 16-row monitoring 1 accessory input (select shaft RPM, liquid flow meter rate, or fan RPM) Ground speed monitoring PM400 Large-scale planter monitoring 36-row monitoring 1 accessory input (select shaft RPM, liquid flow meter rate, or fan RPM) Ground speed monitoring PM500 Expanded planter monitoring 12-row monitoring 12-row tramline (four rows simultaneously) Right and left marker input CAN-based external row shutoff module 3 accessory inputs (shaft RPM, liquid flow meter rate, and fan RPM) Ground speed monitoring Accessory monitoring High and low population warning alarms Speed and area modes for quick field assessments Data saved even in power losses Preset parameters for out-of-the-box operation PM600 Modular planter monitoring 64-row monitoring 1 accessory input (select shaft RPM, liquid flow meter rate, or fan RPM) Ground speed monitoring DID YOU SELECT YOUR Seed sensor (page 50) Ground speed sensor (page 54) CUSTOMERS WHO BUY PM SERIES PLANTER MONITORS ALSO BUY THESE CONVENIENT ACCESSORIES: Hopper level sensor precise material level readings Hall effect sensor cost-effective shaft revolution monitoring Flow meter sprayer application monitoring Implement lift switch simple implement control 32 33

18 INTELLIAG INTELLIAG The world s most versatile controller IntelliAg puts the future of application control in your cab, providing state-of-the-art communication between implement and tractor. This precision farming system monitors and controls with just one terminal, eliminating the need for multiple controllers. Because IntelliAg is designed to the ISO standard, it is interchangeable with other manufacturers compatible equipment. Use IntelliAg with: Planters/grain drills Air carts BENEFITS Standard electrical connector at hitch for convenient plug and play installation Lower equipment cost no need for different controllers for different farm applications Off-the-shelf ISO conformance allows for quick retrofitting to tractors and implements Only one terminal to learn Full screen alarms identify abnormal or failed operation on all enabled system components/controls Control hydraulic valves (pulse-width modulated and servo) Reduce wiring and harnessing Monitor up to 196 rows of seeding Monitor hopper level, air pressure, and shaft speed Retain information even in power failure Variable rate application Log as applied data 34 35

19 INTELLIAG INTELLIAG Tractor Electronic Control Unit (ECU) A tractor ECU is required when using an IntelliAg 10 inch terminal. It manages the power on the CAN BUS and accessory sensor inputs connected to the tractor cab harness, such as ground speed. Cab/Power Harness Diagram Terminal Virtual terminal (ISO compatible) 10 inch color touch screen Video display (connect to optional camera) Backlight and audible alarm adjustment SD card slot allows for saving of configuration files, as applied data, and prescription application Generates as covered maps 4 channel variable rate prescription Compatible with GPS receiver/nema Interface with Trimble AgGPS Autopilot steering INTELLIAG 10 INCH COLOR TOUCH SCREEN 36 37

20 INTELLIAG INTELLIAG Planter System Diagram Planter Control The IntelliAg planter/drill system (PDC) opens up the opportunity to use the planter for more than just an implement to put seeds in the ground. The system provides planter monitoring of seeds being placed in soil by each row unit, including counting seeds planted per acre, inches between seeds, and average population. Plus, the IntelliAg controls the amount of seeds planted per acre. In addition, it features inputs for 16 seed sensors along with auxiliary sensors such as hopper level, air pressure, and shaft RPM. Accessory Module An accessory module is required for planters larger than 16 rows. It s capable of processing 18 seed sensor inputs for communication to control module X S WSMTII-PDC ROW SHUTOFF MODULE (TRU COUNT) X BENEFITS AND FEATURES 4 independent control channels for: Row crop planter seeding (seeds/acre) Grain drill seeding (lbs./acre) Liquid spraying (gal./acre) Granular fertilizer (lbs./acre) Can be connected with ISO VT already in tractor: John Deere Case IH S TCOM Planter monitor functionality (max. 196 rows) AGCO Auto row shutoff control Utilizes Tru Count Clutches (24 rows) Monitor accessory implement sensors including 2 hopper level, 2 air pressure, 2 shaft RPM, 1 ground speed, 1 lift switch HARN. TCOM 38 39

21 INTELLIAG INTELLIAG Air Seeder The IntelliAg air cart control system allows for full utilization of a 1 to 4 bin air cart. The system monitors seed or fertilizer traveling through the air system to ensure the material is getting to the soil and not being trapped in a hose. The system uses a low-cost yet high-tech flow sensor that can detect a flow or blockage situation. A maximum of 216 delivery hoses can be monitored for this condition simultaneously. The air cart control system also includes inputs for auxiliary sensors such as hopper level, air pressure, and shaft RPM. Accessory Module An accessory module is required for processing 18 seed sensor inputs for communication to control module. Maximum 216 rows of seed flow monitoring (12 modules). System Diagram Air Cart Monitoring and Control DJ Air Cart Accessory Sensor Harness Hopper Level Sensors x 4 Fan Shaft RPM Sensor Connect to Cab Harness DJ X CAN Hitch Extension Harness S1 Air Pressure Sensors Sensors x 4 WSMT II Module Air Cart Control DJ Air Cart Control Module Harness WSMTII-ACC BENEFITS AND FEATURES 4 independent control channels for: Air cart seeding (lbs./acre) Grain drill seeding (lbs./acre) Liquid spraying (gal./acre) Granular fertilizer (lbs./acre) Anhydrous ammonia (lbs./acre) Planter monitor functionality (max. 216 rows) Seed Sensor Member Module Monitor accessory implement sensors including 5 hopper level, 4 air pressure, 4 shaft RPM, 1 ground speed, 1 lift switch Control of fertilizer in strip till application with air carts Can be connected with ISO VT already in tractor: John Deere Case IH AGCO PWM Solenoid Valves Channel 1-4 Control Liquid / NH3 Servo Valves Application Rate Sensors x4 Channel 1-4 Feedback Air Pressure Sensor Hopper Level Sensor Implement Lift Sensor S1 16 Row Tower Harness Fan/Shaft RPM Sensor Radar Speed Sensor Connect to next module harness or implement extension harness (Connect CAN terminator if this is the last module on the CAN bus) Channel Control Harness S1 WSMB Module Seed Monitor Standard Dj SE Style Air Tower Harness From Previous Module Harness or Extension Harness CAN Terminator Implement CAN Extension Harness WSMB Module Harness Connect to next module harness or implement extension harness (Connect CAN terminator if this is the last module on the CAN bus) (Optional lengths)

22 INTELLIAG INTELLIAG IntelliAg now available with Trimble AgGPS AutoSteering 1 inch repeatability from plant to harvest any field pattern IntelliAg equipped with the Trimble AgGPS AutoSteering guidance system extends your operating hours, so you can work when you need to and maximize the precision of your rows. 10 Inch Color Touch Screen Terminal 4 channels of variable rate control Coverage maps with paint-over prescription maps AgGPS 252 Receiver with AgGPS 900 Radio Multiple options for GPS corrections including WAAS, OmniSTAR, and RTK AgGPS 900 radio (optional) provides +/-1 inch pass-to-pass, year-to-year accuracy using RTK corrections AutoSteering Screen Operator view of AutoSteering screen on IntelliAg terminal 18 ENABLED 44.5 Prescription variable rate maps GPS receiver with NEMA output AgGPS NavController II Using data from the GPS receiver and internal sensors, the AgGPS NavController II sends precise instructions to the steering control system T3 technology continually corrects for roll, pitch, and yaw by using state-of-the-art 6-axis solid state inertial sensors to give you a true on-ground position Plug and play into most guidance ready vehicles GPS, GLONASS, and RTK Base Station RTK GPS Networks Control Valve Receives electrical signals from the AgGPS NavController II Converts signals to precise hydraulic commands that the vehicle s steering system uses to keep the vehicle on path AgGPS AutoSense Steering Sensor Unique in-a-box steering sensor Measures highly accurate wheel angle information on all terrain Patent-pending technology Obtains information without the use of moving parts or linkages Uniquely combines a GPS receiver, RTK radio, and 10-hour battery into one small unit for quick setup Automatically assigns a previously set point with Autobase technology Rugged and weather proof Trimble RTK networks currently cover more than 130 million acres of North American farmland, so you may have a network covering your area. A network consists of a number of fixed RTK base stations that independently broadcast RTK correction signals so the vehicle can obtain sub-inch accuracy. Contact a local Trimble reseller to manage an RTK network in your area RTK fees may apply for network usage. Continuously sends that information to the AgGPS NavController II 42 43

23 INTELLIAG INTELLIAG Variable Rate Application After loading selected prescription stored on the SD card, the variable rate map will be displayed on the terminal. During the application of prescribed materials, an as covered map is displayed over the prescription map. Note: Farm prescription software must be compatible with FODM applications. Examples: Farm Works version 12, SGIS software, GTA Software Suite, Map Shots, Ag Leader SMS LOAD SELECTED TASK INTELLIAG 10 INCH COLOR TOUCH SCREEN START AND STOP TASK. AS COVERED 44 45

24 SEED MANAGER SE MONITOR SEED MANAGER SE MONITOR The most advanced monitoring for large operations The Seed Manager SE puts the power of DICKEY-john s state-of-the-art highrate sensors to work for maximum performance and precision monitoring. Three available modules Material flow with hopper level (12 rows with 2 hopper level inputs) Material flow without hopper level (16 rows) Air cart (2 fan speed, 3 shaft speed, 2 pressure, 2 hopper inputs) Acre count Population monitoring Ground speed monitoring Seed spacing monitoring Seed count RS485 communication modules Wiring Diagram Seed Manager SE P1 P2 Hitch connectors Material flow module 3 Hop 3 Hop 4 RS485 in RS485 out Versatile and modular, it offers a variety of options for monitoring seed and fertilizer flow on air carts, drills, and planters: Row 1 Row 2 Row 3 Row 4 Row 5 Row 6 Row 7 Row 8 Row 9 Row 10 Row 11 Row 12 R27 R28 R29 R30 R31 R32 R33 R34 R35 R36 Population count for all rows Air cart module Population for the first row in each module and material flow for all other rows Material flow for all rows Plus, choose from 3 modules to build the Seed Manager SE that works for your operation, and enjoy the flexibility of adding modules later for up to 96-row monitoring. RS485 out Material flow module 1 RS485 in Row 1 Row 2 Row 3 Row 4 Row 5 Row 6 Row 7 Row 8 Row 9 Row 10 Row 11 Row 12 Row 13 Row 14 Row 15 Row 16 RS485 out RS485 in Hop 5 Fan 1 Shaft 1 Shaft 2 Press 1 Press 2 R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14 Hop 1 Material flow module 2 Hop 2 RS485 out RS485 in Row 1 Row 2 Row 3 Row 4 Row 5 Row 6 Row 7 Row 8 Row 9 Row 10 Row 11 Row 12 R15 R16 R17 R18 R19 R20 R21 R22 R23 R24 R25 R26 DID YOU SELECT YOUR Seed sensor (page 50) Ground speed sensor (page 54) CUSTOMERS WHO BUY SEED MANAGER SE ALSO BUY THESE CONVENIENT ACCESSORIES: Hopper level sensor precise material level readings Hall effect sensor cost-effective shaft revolution monitoring Air pressure sensor hopper air pressure measurement Implement lift switch simple implement control 46 47

25 DJASM II AIR CART MONITOR DM100 DRILL MONITOR The most economical drill monitoring For cost-effective grain drill monitoring that s backed by DICKEY-john s legendary durability and dependability, put the DM100 in your tractor. The DM100 gives you the flexibility to monitor seed flow on up to 10 rows and up to 5 hopper level sensors with incredible performance. For unbeatable grain drill monitoring, pair the DM100 with 1 hopper level sensor per hopper and 2 of DICKEY-john s advanced seed sensors for each drill section. Choose our Recon Flow Sensor for precision monitoring at a reasonable price. Economy and accuracy combine for first-rate monitoring When you want top-level monitoring at low-level pricing, the DjASM II air cart monitor delivers. It precisely monitors flow on large drills and seeders to help prevent lost profit from unseeded strips. Blockage monitoring for up to 128 rows or 120 rows and 8 hopper level sensors Customizable seeds per second alarm point for 1 to 150 seeds per 2 seconds Modular design can reduce harnessing and wiring costs Advanced RS485 communication modules receive input from 16 sensors or 15 sensors and 1 hopper level sensor Internal audible alarm Five-step LED dimming for day or night use Modular and customizable, the DjASM II is easy to operate yet accurate, with 16 row indicators per module and a 7-segment display. Add up to 8 modules and adjust the minimum seeds per second alarm to fit your needs. Alarm recognition override Odd and even row shutoff capability DID YOU SELECT YOUR Seed sensor (page 50) Flow sensor (page 22, 50) CUSTOMERS WHO BUY DJASM II AIR CART MONITORS ALSO BUY THESE CONVENIENT ACCESSORIES: Hopper level sensor accurate material level readings Implement lift switch simple implement control 48 49

26 SEED & FLOW SENSORS OTHER SENSORS High-Rate Blockage Sensor Air Pressure Sensor Superior blockage detection Measures air pressure in seed hopper Easy to install Detects all sizes of seeds, granular fertilizers, and pesticides Use with air seeders and grain drills Recon Flow Sensor Cost-effective blockage detection Hall Effect Sensor Measures rotational shaft speed and ground speed Available in threaded or smooth surfaces for convenient mounting 12 volt sensor with square-wave signal output Monitors seed and granular fertilizers and pesticides Detects teeth of sprocket, magnets, lug nuts, etc. Use with air carts and grain drills High-Rate Seed Sensor Delivers improved population counts Detects small seeds like milo, beets, and cotton Use with many planter brands High-Rate Grain Drill Sensor Proven high-rate sensor technology packaged for grain drills Implement Lift Switch Enables or disables implement function Attaches to 3-point hitch or lift cylinder Ties to planter monitors and control systems Hopper Level Sensor Mounts inside planter, drill, or air cart Alerts when seed or granular material reaches low level Provides improved population counts Detects small seeds like milo, beets, and cotton Compatible with many grain drill brands 50 51

27 FLOW METERS FLOW METERS Flow Meters Available in poly or stainless steel to meet your spraying needs Use the following information to help you choose the right Flow Meter for your equipment. 1/2-2 in. poly flow meter assemblies include: Flow meter body with turbine, axle, and bearings Hall effect sensor with 3-pin weather pack connector Hose barbs for inlet and outlet LIQUID FLOW RATE FORMULA To calculate liquid flow rates (gpm) so you can pick the correct Flow Meter for your application, use the following formula: Width x speed x application rate (gpa) x = gpm Viton O-rings Coupling nuts Example: 60 ft. x 15 mph x 20 gpa x = gpm 3-4 in. poly flow meter assemblies include: Flow meter body with turbine, axle, and bearings Hall effect sensor with 3-pin weather pack connector Flanges with Viton O-rings for inlet and outlet Flat flanges (no O-rings) LIQUID FLOW METER SIZES Flow Meter Flow Rate 1/2 in gpm 3/4 in gpm 1 in gpm 1 1/2 in gpm 2 in gpm 3 in gpm 4 in gpm 52 53

28 GROUND SPEED SENSING GROUND SPEED SENSING Measuring ground speed has never been easier Radar III World-class accuracy in a ground speed sensor The high-performance, top-of-the-line unit is a streamlined, more compact version of our best-selling Radar II model. Weighs only 1 lb. Radar II The most accurate ground speed sensor This radar ground speed sensor delivers the truest velocity measurement at mounting heights over 6 feet. Installs easily Ground Speed Sensing Compact size 4 x 3.4 x 3.1 inches High-tech planar array for truest possible velocity measurement Views ground surface for accurate ground speed detection Velocity errors of less than or equal to 1-3% after in-field calibration Easy to install Can be mounted to view forward or backward from vehicle Views actual ground surface for accurate speed measurement Can be mounted to look forward or backward from vehicle Velocity range mph ( km/h) Mounts at 35±5 angle and at least 24 in. (610 mm) height from target surface (mounts anywhere from 2 to 8 ft. high) Variety of factory output frequency settings available Sleek design 4 x 4 x in. (10 x 10 x 31.1 mm) Weighs only 4.5 lbs. (2.05 kg) Achieves velocity errors of ±1-3% through in-field calibration Hall Effect Sensor Durable, economical ground speed measurement For cost-effective ground speed detection, choose the Hall Effect Sensor backed by DICKEY-john s legendary reliability. Low-cost ground speed measurement Detects based on gear-tooth/sprocket/ lug nut movement Designed for rugged agriculture environment 4 in 1 Adapter Convenient multi-console operation Radar signal adapter Run 4 electronic consoles off of 1 RVS I or II Ground Speed Sensing Fast, simple installation 54 Ground Speed Sensing Ground Speed Sensing 55

29 GAC SERIES GRAIN ANALYSIS COMPUTERS GAC SERIES GRAIN ANALYSIS COMPUTERS Still America s choice for consistent testing The GAC Series also features: Measurement through capacitance, conductance, and a weighing device Testing for a moisture range of at least 5 to 45% (depending on grain calibration) Put the power of fast, fully automated grain testing to work for your business with GAC Series grain analysis computers. Automatic temperature compensation Moisture repeatability of ±0.1% (depending on application) Moisture Testing The GAC Series delivers accurate, reliable moisture, temperature, and test weight results quickly and consistently for applications including cereals, oilseeds, grass seeds, vegetable seeds, and beans. Advanced technology in GAC units makes grain testing easy simply choose your grain; load the hopper, and press a button for precise analysis. Each unit comes with an available calibration library of more than 450 different products, and all calibrations are transferable between units. Units are easily reprogrammed users can change product display labels and calibrations at any time. Large LCD display (240 x 64 pixels) Standard RS232 output Power supply of VAC, Hz at 20 VA consumption GAC2100 Agri Economical accuracy Grain testing results in 32 seconds Stores 8 grain calibrations GAC500 XT Elevator-quality testing on the farm Grain testing results in 25 seconds Semi-portable Turn on and select grain. Moisture Testing GAC2100 GI Stores 16 grain calibrations Professional-level precision testing Fill hopper with grain. Grain testing results in 16 seconds Stores 16 grain calibrations GAC2100b The federal standard NTEP certified Pull slide and strike of grain. Grain testing results in 16 seconds Stores 64 product calibrations User-definable quick keys for one-touch grain testing Measure grain and get moisture readout. 56 Moisture Testing Moisture Testing 57

30 INSTALAB 600 SERIES ANALYZER INSTALAB 600 SERIES ANALYZER Moisture Testing The leader in precision grain analysis The Instalab 600 Series delivers the most consistent, accurate results you ll find in fixed-filter testing. Available with 4 to 10 filters, Instalab 600 Series units are customizable for your needs we preprogram each unit with user-defined filters. CHANGE FILTERS TO ADJUST BANDWIDTH FOR ANY PROBE YOU NEED TO CONDUCT, INCLUDING: protein cellulose sugar ash starch oil and fat alcohol cotton The Instalab 600 Series features: Testing results delivered in 10 seconds 10 nm customer-replaceable filters Rotating sample cups that reduce problems from sample variation Optigain to adjust gain for lowreflectance samples Comprehensive calibration support package at no cost (lab fees excluded) Product calibrations are available on request, and the Instalab 600 Series is designed for versatility and easy configuration in the field. In addition to grain, the Instalab 600 Series delivers high-performance analysis in applications including: Textile manufacturing Grain processing Flour milling Ethanol production Feed processing Meat processing Model 660A Includes filters in 6 common wavelengths Measures moisture, protein, starch, oil, and more Model 610FGA Includes 10 filters Measures feed and grain properties Model 610SBA Includes 10 filters Measures soybean, wheat, and corn properties Meets FGIS requirements for moisture, protein, and oil Model 610MCA Includes 10 common filters for NIR applications Measures properties in food, feed, grain, meat, and dairy Moisture Testing polyester Model 610A Custom Includes 10 filters: 6 standard filters 4 customer-selected filters Choose from more than 50 wavelengths Allows dedicated calibration for special product applications PHOTO COURTESY OF GRAIN JOURNAL 58 Moisture Testing Moisture Testing 59

31 MINI GAC HANDHELD GRAIN ANALYSIS COMPUTERS MINI GAC HANDHELD GRAIN ANALYSIS COMPUTERS The world s most accurate handheld moisture tester Put the industry s choice for precision moisture testing in your hand. The mini GAC is the only handheld that tests both moisture and test weight of grain. mini GAC plus Accurately tests both moisture and test weight Stores up to 20 grain calibrations mini GAC Precision moisture testing results Stores up to 20 grain calibrations Load Moisture Testing Based on federal standard moisture testing technology, it delivers grain trade accuracy. The mini GAC is fast and easy to use no cumbersome screw caps. Both models come with a loader, 9 volt battery, carrying case, and belt clip and offer these features: Moisture range 5-45% (depending on grain type) 0.2% moisture repeatability (depending on grain type) Internal scale no preweighing More than 450 calibrations available USB compatibility for calibration loading Test grain hot or cold ( F) Fill Strike Moisture Testing Menu-driven operating system Automatic temperature compensation Press 60 Moisture Testing Moisture Testing 61

32 M3G AND M20P PORTABLE MOISTURE TESTERS M3G AND M20P PORTABLE MOISTURE TESTERS Moisture Testing For the fastest grain moisture testing The M3G and M20P put high-speed, repeatable moisture testing in your hands. These lightweight units let you take grain moisture readings with a simple scoop from bins or hoppers. Advanced DICKEY-john technology lets you easily bias to match readings to local elevator tests and change grain types with the push of a button. Both units store and average up to 10 individual samples. M3G Basic moisture testing Test up to 3 grains Preprogrammed calibrations for: Corn high (15-32%) and low (8-17%) Soybeans (8-22%) Wheat (8-20%) Change grain calibrations with a simple download ±0.5 repeatability with normal stored grain No cups or screw-on caps Density compensation without weighing or compressing samples Easy-to-read LCD display with grain labels clearly listed USB port for language changes and grain calibration uploads Compact and lightweight only 1.6 lbs. M20P Versatile moisture testing Test up to 20 grains Download preprogrammed calibrations to suit your needs (for Europe unless otherwise indicated): Corn high and low (U.S.) Corn high Soybeans (U.S.) Wheat (U.S. and Europe) Barley (six and two row) Sunflowers Peas Rice Durum Tritical Rye English ray grass Horsebean Dactyle Rapeseed Moisture Testing Oats Lupine Milho Alta and Baixa (Portugal) Milo (U.S.) Soja (Portugal) Trigo (Portugal) ±0.5 repeatability with normal stored grain No cups or screw-on caps Density compensation without weighing or compressing samples Easy-to-read LCD display with grain labels clearly listed USB port for language changes and grain calibration uploads Compact and lightweight only 1.6 lbs. 62 Moisture Testing Moisture Testing 63

33 HAY MOISTURE TESTERS HAY MOISTURE TESTERS Moisture Testing Hay producers most essential instruments Know when to bale and how to store with our precision Hay Moisture Testers. These portable units quickly and accurately measure moisture levels in hay bales, while baling and in windrows. Easy to use, our Hay Moisture Testers measure moisture from 6 to 40% on hay. Multiple attachments are available for added flexibility and functionality. Each has built-in battery and calibration checks and a temperature-stable microcontroller circuit. Hay Moisture Testers are available with durable storage cases. Dj FX-2000-PKGS1 Hay baler monitor Includes baler monitor, hay handle, 10 inch probe, short pin prod, baler sensor, power supply harness, and carrying case Measures continuously during baling Works with most baler brands In continuous mode Takes 2 readings every second Displays average and highest of 8 accumulated readings Updates readings every 4 seconds Backlit display In portable mode Averages up to 100 accumulated readings Displays average and highest of accumulated readings Dj FX S1 Hay baler monitor with sensor Includes in-cab baler monitor and baler sensor Measures continuously during baling Works with most baler brands In continuous mode Takes 2 readings every second Displays average and highest of 8 accumulated readings Updates readings every 4 seconds Backlit display In portable mode Averages up to 100 accumulated readings Displays average and highest of accumulated readings Moisture Testing Dj F S1 Dj F-2000-PKGS1 Hay moisture tester with probe Hay moisture tester package DID YOU SELECT YOUR 10-inch prod (page 68) Baler sensor (page 68) Carrying case (page 69) CUSTOMERS WHO BUY HAY MOISTURE TESTERS ALSO BUY THESE CONVENIENT ACCESSORIES: Short-pin prod windrow testing Handle high-density or larger bale testing 10-inch handle prod standard and high-density bale testing 18-inch handle prod large square or round bale testing 36-inch handle prod larger square or round bale testing Includes 10 inch probe Takes readings in bales and windrows Averages up to 100 accumulated readings Displays average and highest of accumulated readings Digital readout Includes hay handle, 10 inch probe, short pin prod, and carrying case Takes readings in bales and windrows Averages up to 100 accumulated readings Displays average and highest of accumulated readings Digital readout 64 Moisture Testing Moisture Testing 65

34 COTTON MOISTURE TESTERS COTTON MOISTURE TESTERS The most reliable cotton moisture analysis Get the precise moisture readings you need to maximize your lint cotton and seed cotton production with the Dj C-2000-PKGS1 Cotton Moisture Tester. This easy-to-use, portable meter delivers fast, accurate results. Uses resistance technology recognized as world standard for moisture testing 4-16% moisture range on lint cotton 6-20% moisture range on seed cotton Averages up to 100 accumulated readings Built-in battery and calibration checks Moisture Testing Digital readout Proven microcontroller circuit Durable hard-sided case included Moisture Testing DID YOU SELECT YOUR 10-inch prod (page 68) Carrying case (page 69) CUSTOMERS WHO BUY COTTON MOISTURE TESTERS ALSO BUY THESE CONVENIENT ACCESSORIES: Handle high-density or larger cotton module testing 36-inch T-handle cotton module testing 10-inch handle prod cotton module testing 18-inch handle prod large cotton module testing 36-inch handle prod larger cotton module testing Cotton ball cup cotton ball testing Baled fiber probe baled cotton fiber testing Cone & skein fiber probe baled cotton cone and skein fiber testing 66 Moisture Testing Moisture Testing 67

35 HAY & COTTON MOISTURE TESTER ACCESSORIES HAY & COTTON MOISTURE TESTER ACCESSORIES 10-Inch Prod Cotton Ball Cup For testing standard hay bales For testing cotton balls Attaches directly to connector on top of Hay Moisture Testers Attaches directly to connector on top of Dj C-2000-PKGS1 Cotton Moisture Tester Short-Pin Prod For testing hay in windrows Requires Handle 10-Inch Handle Prod For testing standard and high-density hay bales Moisture Testing Baler Sensor For continuous monitoring during hay baling Comes with 30 ft. cable to run from baler chamber sensor to meter in cab Recommended for use with Dj FX-2000PKGS1 and Dj FX S1 Hay Moisture Testers Also available with 40 ft. cable for larger balers Split Baler Sensor For continuous monitoring during hay baling For Freeman bales Requires Handle 18-Inch Handle Prod For testing large square or round hay bales Requires Handle 36-Inch Handle Prod For testing large square or round hay bales or cotton modules Requires Handle Carrying Case Fits all Hay and Cotton Moisture Tester components Moisture Testing Handle Mounts to connector on top of Hay and Cotton Moisture Testers Recommended when testing high-density or larger hay bales and cotton modules to minimize stress on meter case 36-Inch T-Handle Mounts to connector on top of Dj C-2000-PKGS1 Cotton Moisture Tester Recommended when testing cotton modules to minimize stress on meter case 68 Moisture Testing Will not hold Baler Sensor or 18-Inch and 36-Inch Handle Prods Baled Fiber Probe For testing baled cotton fibers Mounts to connector on top of Dj C-2000-PKGS1 Cotton Moisture Tester Cone & Skein Fiber Probe For testing baled cotton cones and skein fibers Mounts to connector on top of Dj C-2000-PKGS1 Cotton Moisture Tester Moisture Testing 69

36 SOIL COMPACTION TESTER SOIL COMPACTION TESTER Soil Compaction Testing The simplest way to measure soil compaction Maximize your yields and work to decrease your costs with the economical, easy-touse DICKEY-john Soil Compaction Tester. This easy-to-use tool quantifies soil compaction so you can develop a targeted plan for optimum yields and cost-effective production. (Heavily compacted soil can inhibit root growth and reduce yields.) Disc depth Plowing depth Plow pan Subsoiling depth Abnormal root development Roots cannot penetrate To measure compaction in your fields, simply push the tester into the ground at various locations to determine problem areas and pressure increases and decreases. The Soil Compaction Tester gauge gives you readings of pressure required to penetrate your soil in pounds per square inch. Easy-to-read, color-coded, stainless-steel dial Liquid-filled gauge that reduces shock Depth marks at 3, 6, 9, 12, 15, and 18 in. Rugged, molded housing and handle Moisture is trapped above and below 3 in. 6 in. 9 in. 12 in. 15 in. 100 lbs. (uncompacted) 400 lbs. (compacted) 75 lbs. (uncompacted) COMPACTION AND ROOT DEVELOPMENT lbs...good lbs....fair lbs....poor Soil Compaction Testing 70 Soil Compaction Testing Soil Compaction Testing 71

37 DIAGNOSTIC EQUIPMENT DIAGNOSTIC EQUIPMENT Advanced solutions for accurate electronics testing Make sure your equipment is fully functional before you get in the field with DICKEY-john s selection of high-quality testing equipment. Application Rate Sensor Tester Assess sensor function Easy to operate Plug sensor into tester and rotate shaft Battery powered Sounds intermittent alarm to indicate operation Diagnostics Seed Simulator Test your planter monitors Simulates seed sensor and radar ground speed signals on planters up to 36 rows Replicates 1- or all-row failure Reproduces 2 seeding rates for both corn and soybeans Cables available for PM300/400, PM3000/1000, Seed Manager SE, and DjASM II Sensor Tester 90 Check your planter sensors Accurately verifies sensor operation Easy to operate Battery operated no power source required Diagnostics Vehicle Ground Speed Simulator 200 Verify ground speed controller operation Simulates speed signal input from Radar II and III ground speed sensors Ensures cabling and console are accepting input Simple to operate 72 Diagnostics Diagnostics 73

38 INDEX INDEX Index 10 Inch Color Touch Screen, page 10, 18, 20, 36, 42, Inch Handle Prod, page Inch Prod, page Inch Handle Prod, page Inch Handle Prod, page Inch T-Handle, page 68 4 gpm proportional hydraulic flow control valves, page 29 4 in 1 Adapter, page 55 8 gpm proportional hydraulic flow control valves, page 29 Accessories, anhydrous control, page 24 Accessories, cotton moisture tester, page 68, 69 Accessories, hay moisture tester, page 68, 69 Accessories, IntelliAg, page 10-21, Accessories, planter monitor, page 38, Actuators, valve, page 28 Adapter, 4 in 1, page 55 Adapter brackets, page 28 AgGPS 252 Receiver with AgGPS 900 Radio, page 19, 43 AgGPS AutoSense Steering Sensor, page 18, 42 AgGPS NavController II, 19, 43 Air cart control modules, page 40 Air cart monitors, page 40, 48 Air cart/planter/grain drill monitors, page 32-34, 38-41, Air pressure sensors, page 22, 51 All in One Hydraulic Motor & Valve Assembly, HD 4180, page 29 Analyzers, page Anhydrous control accessories, page 24, 25 Anhydrous kits, page 24 Application controllers, page 4-21 Application monitors, page 4-21 Application rate sensors, page 22 Application Rate Sensor Tester, page 72 Application sensors, page 22, 23 Baled Fiber Probe, page 69 Baler sensors, page 68 Base station, page 19, 43 Blockage sensor, page 50 Boom Controller, page 24 Boom output module, page 14, 16 Boom shutoff module, page 14, 16 Boom shutoff valves, page 28 C-2000 Cotton Moisture Tester, page 66 Carrying Case, page 69 Case, hay & cotton moisture testers, page 69 CCS100 application controller, page 6 CMS100 application monitor, page 7 Color touch screens, page 10, 18, 20, 36, 42, 44 Cone & Skein Fiber Probe, page 69 Continental Magnum Equalizer NH3 Heat Exchanger System/Kit, page 24 Control systems, page 4, 5 Control valves, page 18, 26-29, 42 Controllers, material application, page 4-21 Cotton Ball Cup, page 69 Cotton moisture tester accessories, page 68, 69 Cotton moisture testers, page 66 Cup, cotton ball, page 69 Diagnostic equipment, page 72 Dj C-2000-PKGS1 Cotton Moisture Tester, page 66 Dj F S1 Hay Moisture Tester, page 65 Dj F-2000-PKGS1 Hay Moisture Tester, page 65 Dj FX S1 Hay Moisture Tester, page 64 Dj FX-2000-PKGS1 Hay Moisture Tester, page 64 DjASM II air cart monitor, page 48 DM100 drill monitor, page 49 Drill monitors, page 49 F-2000 Hay Moisture Tester, page 65 Flow control valves, liquid, page Flow control valves, hydraulic, page 29 Flow meters, liquid, page 30, 52 Flow meters, poly, page 30, 52 Flow meters, stainless steel, page 30, 52 Flow sensors, page 22, 23, 50, 51 FX-2000 Hay Moisture Tester, page 64 GAC grain analysis computers, page 56, 57, 60 GAC, mini, page 60 GAC, mini plus, page 60 GAC2100 Agri, page 57 GAC2100 GI, page 57 GAC2100b, page 57 GAC500 XT, page 57 GPS, GLONASS, and RTK Base Station, page 19, 43 Grain analysis computers, page 56, 57, 60 Grain analyzers, page Grain drill sensors, page 50 Grain drill/planter control modules, page Grain drill/planter/air cart monitors, page 32-34, 38-41, Ground speed sensor testers, page 72 Ground speed sensors, page 54, 55 Hall effect sensors, page 23, 51, 55 Handheld grain analysis computers, page 60 Handheld moisture testers, page Handles, page 68 Handle prods, page 69 Hay moisture tester accessories, page 68, 69 Hay moisture testers, page 64, 65 HD 4180 All in One Hydraulic Motor & Valve Assembly, page 29 High-Rate Blockage Sensor, page 50 High-Rate Grain Drill Sensor, page 50 High-Rate Seed Sensor, page 50 Hopper Level Sensor, page 23, 51 Hydraulic control valves, page 29 Hydraulic motor & valve assembly, page 29 Implement Lift Switch, page 23, 51 Instalab 600 Series analyzer, page 58 Instalab 610A Custom, page 59 Instalab 610FGA, page 59 Instalab 610MCA, page 59 Instalab 610SBA, page 59 Instalab 660A, page 59 IntelliAg, page 8, 34 IntelliAg accessories, page 10-21, IntelliAg with AgGPS AutoSteering, page 18, 19, 42, 43 Land Manager control system, page 5 Land Manager II control system, page 5 Land Manager SE control system, page 5 Liquid flow control valves, page Liquid flow meters, page 30, 52 Liquid pressure sensors, page 22 M20P portable moisture tester, page 62 M3G portable moisture tester, page 62 Material application, page 4-31 Material application accessories, page Material application controllers, page 4-21 Material application monitors, page 4-21 Material application sensors, page 22, 23 Meters, flow, page 30, 52 mini GAC handheld grain analysis computer, page 60 mini GAC plus handheld grain analysis computer, page 60 Modules, air cart control, page 40 Modules, planter/grain drill control, page 38 Moisture testers, page Moisture testers, handheld, page Moisture testing, page Monitors, IntelliAg, page 8-21, Monitors, material application, page 4-21 Monitors, planter/grain drill/air cart, page 32-34, 38-41, NH3 kits, page 24 Planter monitor accessories, page 38, Planter monitor testers, page 72 Planter monitors, page 32-34, 38, 39 Planter sensor testers, page 72 Planter/grain drill control modules, page Planter/grain drill/air cart monitors, page 32-34, 38-41, 46-49, page PM Series planter monitors, page 32, 33 PM100, page 32 PM100E, page 32 PM200, page 32 PM200E, page 32 PM300, page 33 PM400, page 33 PM500, page 33 PM600, page 33 Poly flow meters, page 30, 52 Portable moisture testers, page Pressure sensors, page 22, 51 Probes, baled fiber, page 69 Probes, cone & skein, page 69 Prods, 10 inch, page 68 Prods, 10 inch handle, page 69 Prods, 18 inch handle, page 69 Prods, 36 inch handle, page 69 Prods, handle, page 69 Prods, short pin, page 68 Proportional hydraulic flow control valves, page 29 Radar II, page 54 Radar III, page 54 Receiver, page 19, 43 Recon Flow Sensor, page 50 Seed Manager SE monitor, page 46, 47 Seed sensors, page 50 Seed Simulator, page 72 Sensor Tester 90, page 72 Sensors, air pressure, page 22, 51 Sensors, application rate, page 22 Sensors, baler, page 68 Sensors, blockage, page 50 Sensors, diagnostic equipment, page 72 Sensors, flow, page 22, 50 Sensors, grain drill, page 50 Sensors, ground speed, page 54, 55 Sensors, hall effect, page 23, 51, 55 Sensors, hopper level, page 23, 51 Sensors, liquid pressure, page 22 Sensors, material application, page 22, 23 Sensors, other, page 51 Sensors, seed, page 50 Sensors, split baler, page 68 Sensors, steering, page 18, 42 Sensors, testing equipment, page 72 Servo hydraulic flow control valves, page 29 Short-Pin Prod, page 68 Soil compaction testers, page 70 Split Baler Sensor, page 68 Steering sensor, page 18, 42 Switches, implement lift, page 23, 51 T-Handle, 36 inch, page 68 Testers, application rate sensor, page 72 Testers, ground speed sensor, page 72 Testers, moisture, page Testers, planter monitor, page 72 Testers, planter sensor, page 72 Testers, soil compaction, page 70 Tractor ECU, page 11, 37 Valve actuators, page 28 Valves, control, page 18, 26-29, 42 Variable Rate Application, page 20, 44 Vehicle Ground Speed Simulator 200, page 72 Index 74 Index Index 75