Series 1700 Size 1 1.8
|
|
- Sherilyn Stephens
- 6 years ago
- Views:
Transcription
1 Series
2 Series
3 Series 1700 Air Service Units Filter 17v01c.s.t 0 = Zinc alloy body 1 = Technopolymer body c CONNECTIONS A = G 1/8" B = G 1/4" Filter pore size A = 5 s B = 20 C = 50 TYPE P = Bowl protection t S = Automatic drain PS = Bowl protection and Automatic drain Example: 17101A.B.P Filter size 1 with G 1/8" connections, filter pore size 20 and bowl protection with technopolymer body. - Double filtering action: by air centrifuging and by replaceable and reusable HDPE porous filter element. - Zinc alloy body or reinforced technopolymer body with threaded aluminium insert connections. - Wall mounting possibility with screws protected by covers. - Transparent technopolymer bowl screwed to the body. - Shock resistant bowl technopolymer protection. - Manual and semi-automatic water drain valve; in the semi-automatic version the drainage happens when there is no pressure or by pushing the valve up-wards. - Possibility to see the water level on 60 also with bowl protection assembled. - Automatic water drainage bowl available on request. Filter Serie Size Air Service 1_GB 1700 Units - Filter s 1 bar - 1, MPa Weight with technopolymer body gr. 10 Weight with zinc alloy body gr. 218 Filter pore size Bowl capacity 20 cm Vertical on zinc alloy body 0 Nm on technopolymer body.10
4 Air Service Units Coalescing filter Series v08c.e.t 0 = Zinc alloy body 1 = Technopolymer body c CONNECTIONS A = G 1/8" B = G 1/4" FILTER EFFICIENCY e E = 99,97% TYPE P = Bowl protection t S = Automatic drain PS = Bowl protection and Automatic drain Example: 17108A.E.P Filter size 1 with G 1/8" connections. Filter efficiency 99,97% and bowl protection with technopolymer body. - Coalescing filter element remove 0,1 particle equivalent to 99,97%. - Zinc alloy body or reinforced technopolymer body with threaded aluminium insert connections. - Wall mounting possibility with screws protected by covers. - Transparent technopolymer bowl screwed to the body. - Shock resistant bowl technopolymer protection. - Manual and semi-automatic water drain valve; in the semi-automatic version the drainage happens when there is no pressure or by pushing the valve up-wards. - Possibility to see the water level on 60 also with bowl protection assembled. - Automatic water drainage bowl available on request. Coalescing Serie Size Air Service 1_GB 1700 Units filter - Coalescing filter s 1 bar - 1, MPa Weight with technopolymer body gr. 110 Weight with zinc alloy body gr. 225 Filter efficiency with 0,1 particle 0,9997 Bowl capacity 20 cm Vertical on zinc alloy body 0 Nm on technopolymer body.11
5 Series 1700 Air Service Units Panel mounting pressure reguletor 17109c.g.t c CONNECTIONS A = G 1/8" B = G 1/4" ADJUSTING RANGE A = 0-2 bar g B = 0-4 bar C = 0-8 bar D = 0-12 bar TYPE L = no Relieving SM = improved relieving SR = Unbalanced valve t SRM = Unbalanced valve with improved relieving SMF = Improved relieving with controlled refiel Example: 17109A.C Panel mounting pressure regulator size 1 with G 1/8" connections, 0-8 bar adjusting range with relieving. Adjustment characteristics - Diaphragm pressure regulator with relieving. - Balanced poppet. - Technopolymer body with aluminum reinforced threaded connections. - Handle lockable in the desired position by simply pressing it downwards. - Two pressure gauge connections with plug complete of seal. - Panel mounting bracket. Panel Serie Size Air Service 1_GB 1700 mounting Units pressure - Panel mounting reguletor pressure reguletor s 1 bar - 1, MPa Pressure gauge connections G 1/8" Weight gr. 110 Pressure range 0-2 bar / 0-4 bar 0-8 bar / 0-12 bar Any.12
6 Air Service Units Panel mounting pressure regulator including manometer Series c.g c CONNECTIONS A = G 1/8" B = G 1/4" ADJUSTING RANGE A = 0-2 bar g B = 0-4 bar C = 0-8 bar D = 0-12 bar Example: 17129A.C Panel mounting pressure regulator size 1 with G 1/8" connections, 0-8 bar. Adjustment characteristics - Diaphragm pressure regulator with relieving. - Balanced poppet. - Technopolymer body with aluminum reinforced threaded connections. - Handle lockable in the desired position by simply pressing it downwards. - Including manometer in the handle upper surface. - Panel mounting bracket. Panel Serie Size Air Service 1_GB 1700 mounting Units pressure - Panel mounting regulator pressure including regulator manometer including manometer s 1 bar - 1, MPa Pressure gauge connections G 1/8" Weight gr. 250 Pressure range 0-2 bar / 0-4 bar 0-8 bar / 0-12 bar Any.1
7 Series 1700 Air Service Units Modular pressure regulator 17v02c.g.t 0 = Zinc alloy body 1 = Technopolymer body c CONNECTIONS A = G 1/8" B = G 1/4" ADJUSTING RANGE A = 0-2 bar g B = 0-4 bar C = 0-8 bar D = 0-12 bar t TYPE L = no Relieving SM = improved relieving Example: 17102A.C Pressure regulator size 1 with G 1/8" connections and 0-8 bar adjusting range with relieving with technopolymer body. Adjustment characteristics - Diaphragm pressure regulator with relieving. - Balanced poppet. - Zinc alloy body or reinforced technopolymer body with threaded aluminium insert connections. - Wall mounting possibility with screws protected by covers. - Handle lockable in the desired position by simply pressing it downwards. - Two pressure gauge connections with plug complete of seal. - Panel mounting bracket. Modular Serie Size Air Service 1_GB 1700 pressure Units - regulator Modular pressure regulator s 1 bar - 1, MPa Pressure gauge connections G 1/8" Weight with technopolymer body gr. 15 Weight with zinc alloy body gr. 250 Pressure range 0-2 bar / 0-4 bar 0-8 bar / 0-12 bar Any on zinc alloy body 25 Nm on technopolymer body.14
8 Air Service Units Modular pressure regulator including manometer Series v22c.g 0 = Zinc alloy body 1 = Technopolymer body c CONNECTIONS A = G 1/8" B = G 1/4" ADJUSTING RANGE A = 0-2 bar g B = 0-4 bar C = 0-8 bar D = 0-12 bar Example: 17022A.C Pressure regulator size 1 with G 1/8" connections and 0-8 bar adjusting range with relieving with Zinc alloy body. Adjustment characteristics - Diaphragm pressure regulator with relieving. - Pressure gauge included on the top of adjusting knob. - Balanced poppet. - Zinc alloy body or reinforced technopolymer body with threaded aluminium insert connections. - Wall mounting possibility with screws protected by covers. - Lockable handle by simply pressing it downwards in the desired position. - Panel mounting bracket. Modular Serie Size Air Service 1_GB 1700 pressure Units - regulator Modular pressure including regulator manometer including manometer s 1 bar - 1, MPa Pressure gauge connections G 1/8" Weight with technopolymer body gr. 250 Weight with zinc alloy body gr. 80 Pressure range 0-2 bar / 0-4 bar 0-8 bar / 0-12 bar Any on zinc alloy body 25 Nm on technopolymer body.15
9 Series 1700 Air Service Units Manifold pressure regulators 170t2c.g TYPE B = Standard regulator t M = Manifold press. reg. c/w manometer c CONNECTIONS A = G 1/8" B = G 1/4" ADJUSTING RANGE A = 0-2 bar g B = 0-4 bar C = 0-8 bar D = 0-12 bar Example: 170B2A.C Standard manifold pressure regulator with connections G1/8" and adjusting range 0-8 bar. Adjustment characteristics - Pneumax modular regulators have a common inlet for the whole manifold joined by a bayonet system. - Alternatively to standard version it is also possible to use regulators with manometer included. - This solution allows space savings on machine and avoids further pneumatic connections among regulators and manometers. Manifold Serie Size Air Service 1_GB 1700 pressure Units - regulators Manifold pressure regulators s 1 bar - 1, MPa Pressure gauge connections G 1/8" Weight w/out manometer gr. 25 Weight with manometer gr. 80 Pressure range 0-2 bar / 0-4 bar 0-8 bar / 0-12 bar Any 25 Nm.16
10 Air Service Units Manifold pressure regulators Series Bt2c.n.g t TYPE B = Standard regulator M = vers. manometer included c CONNECTIONS A = G 1/8" B = G 1/4" POSITIONS N. 2 = 2 regulators = regulators n 4 = 4 regulators 5 = 5 regulators 6 = 6 regulators ADJUSTING RANGE A = 0-2 bar g B = 0-4 bar C = 0-8 bar D = 0-12 bar Note: a special kit between pressure regulators is necessary for manifold mounting. Therefore regulators and kits must be ordered in same quantity less one kit. Code 170M6, see next page. Adjustment characteristics - Pneumax modular regulators have a common inlet for the whole manifold joined by a bayonet system. - Alternatively to standard version it is also possible to use regulators with manometer included. - This solution allows space savings on machine and avoids further pneumatic connections among regulators and manometers. Air Manifold Service pressure Units regulators s 1 bar - 1, MPa Pressure gauge connections G 1/8" Weight w/out manometer gr. 25 Weight with manometer gr. 80 Pressure range 0-2 bar / 0-4 bar 0-8 bar / 0-12 bar Any 25 Nm.17
11 Series 1700 Air Service Units Lubrifcator 17v0c.t 0 = Zinc alloy body 1 = Technopolymer body c CONNECTIONS A = G 1/8" B = G 1/4" t TYPE P = Bowl protection Example: 1710A.P Lubricator size 1 with G 1/8" connections and bowl protection with technopolymer body. - Fog type lubrication with variable section orifice according to the flow. - Zinc alloy body or reinforced technopolymer body with threaded aluminum insert connections. - Wall mounting possibility with screws protected by covers. - Transparent technopolymer bowl screwed to the body. - Technopolymer shock resistant bowl protection. - Possibility to see the min. and max. oil level on 60 also with bowl protection assembled. - Transparent technopolymer sight dome with adjusting handle. - Oil filling plug. Lubrifcator Serie Size Air Service 1_GB 1700 Units - Lubrifcator s 1 bar - 1, MPa Weight with technopolymer body gr. 108 Weight with zinc alloy body gr. 258 Indicative oil drip rate 1 drop every 00/600 Nl Oil type FD22 - HG2 Bowl capacity 6 cm Vertical on zinc alloy body 0 Nm on technopolymer body Min. operational flow at 6, bar 10 Nl/min..18
12 Air Service Units Filter pressure regulator Series v04c.s.g.t.o 0 = Zinc alloy body 1 = Technopolymer body c CONNECTIONS A = G 1/8" B = G 1/4" Filter pore size A = 5 s B = 20 C = 50 ADJUSTING RANGE A = 0-2 bar g B = 0-4 bar C = 0-8 bar D = 0-12 bar TYPE P = Bowl protection t S = Automatic drain PS = Bowl protection e Automatic drain o OPTION O = Lockable version Example: 17104A.B.C.P Filter - pressure regulator size 1 with G 1/8î connections, filter pore 20 adjusting range 0-8 bar and bowl protection with technopolymer body. Adjustment characteristics - Filter - diaphragm pressure regulator with relieving. - Balanced poppet. - Double filtering action: by air centrifuging and by replaceable and reusable HDPE porous filter element. - Zinc alloy body or reinforced tecnopolymer body with threaded aluminium insert connections. - Wall mounting possibility with screws protected by covers. - Handle lockable in the desired position by simply pressing it downwards. - Transparent technopolymer bowl screwed to the body. - Technopolymer shock resistant bowl protection. - Manual and semi-automatic water drain valve; in the semi-automatic version the drainage happens when there is no pressure or by pushing the valve up-wards. - Possibility to see the water level on 60 also with bowl protection assembled. - Two pressure gauge connections with plug complete of seal. - Panel mounting bracket. - Automatic water drainage bowl available on request. Filter Serie Size Air Service 1_GB pressure 1700 Units regulator - Filter pressure regulator s 1 bar - 1, MPa Pressure gauge connections G 1/8" Weight with technopolymer body gr. 180 Weight with zinc alloy body gr. 295 Pressure range 0-2 bar / 0-4 bar 0-8 bar / 0-12 bar Filter pore size Bowl capacity 20 cm Vertical on zinc alloy body 0 Nm on technopolymer body.19
13 Series 1700 Air Service Units Progressive start-up valve t 171t TYPE 10.M2 = Electric control complete wih M2 mechanic (see pag. 2.1) 20 = with pneumatic control - way valve with double poppet. - Possibility to adjust the down stream circuit filling time by the enclosed adjustable metering screw. - Quick down stream circuit discharge. - Possibility for a pneumatic or electric piloting control. - Body made with anodized 2011 aluminum alloy. - Wall mounting possibility with screws. Progressive Serie Size Air Service 1_GB 1700 Units start-up - Progressive valve start-up valve s 10 bar - 1 MPa Weight gr. 65 Any Min. operating pressure 2,5 bar - 0,25 MPa Nominal flow at 6 bar with p= Nl/min. Flow with adjustable metering screw fully open 150 Nl/min..20
14 Air Service Units Shut-off valve Series v0.t 0 = Zinc alloy body 1 = Technopolymer body t TYPE A = Not lockable handle B = Lockable handle - ways poppet valve. - Zinc alloy body or reinforced technopolymer body with threaded aluminium insert connections. - Double handle action for valve opening: pushing and rotating (clockwise). - Simply rotate the valve handle counter clockwise for valve closing and down stream circuit discharging. - Possibility to lock the valve in the discharging position by fitting in a padlock in the proper seat. - Technopolymer body with metal reinforced threaded connections. Shut-off Serie Size Air Service 1_GB 1700 valve Units - Shut-off valve s 10 bar - 1, MPa Weight with technopolymer body gr. 155 Weight with zinc alloy body gr. 280 Any Handle opening and closing angle 90 on zinc alloy body 0 Nm on technopolymer body.21
15 Series 1700 Air Service Units Shut-off valve 17v0.t 0 = Zinc alloy body 1 = Technopolymer body TYPE M2 = Electric with M2 t M2/9 = Electric with M2/9 - ways poppet valve, electric control. - Zinc alloy body or reinforced technopolymer body with threaded aluminium insert connections. - Technopolymer body with metal reinforced threaded connections. Air Shut-off Service valve Units s Max. working pressure 10 bar - 1, MPa Min. working pressure 2 bar Max. ambient temperature (at 10 bar) -5 C - 50 C Weight with technopolymer body gr. 215 Weight with zinc alloy body gr. 45 Any on zinc alloy body 0 Nm on technopolymer body.22
16 Air Service Units Shut-off valve Series v0.t 0 = Zinc alloy body 1 = Technopolymer body t TYPE PN = with pneumatic control - ways poppet valve, pneumatic pilot. - Zinc alloy body or reinforced technopolymer body with threaded aluminium insert connections. - Technopolymer body with metal reinforced threaded connections. Air Shut-off Service valve Units s Connections G 1/8" Max. working pressure 10 bar - 1, MPa Min. working pressure 0 bar Max. ambient temperature (at 10 bar) -5 C - 50 C Weight with technopolymer body gr. 180 Weight with zinc alloy body gr. 10 Any on zinc alloy body 0 Nm on technopolymer body.2
17 Series 1700 Air Service Units Filter pressure regulator + Lubricator 17v06c.s.g.t 0 = Zinc alloy body 1 = Technopolymer body c CONNECTIONS A = G 1/8" B = G 1/4" Filter pore size A = 5 s B = 20 C = 50 ADJUSTING RANGE A = 0-2 bar g B = 0-4 bar C = 0-8 bar D = 0-12 bar TYPE P = Bowl protection t S = Automatic drain PS = Bowl protection and Automatic drain Example: 17106A.B.C.P Service unit combination complete with filter - pressure regulator and lubricator size 1 G 1/8î connections, filter pore size 20, adjusting range 0-8 bar and bowl protections with technopolymer body. Adjustment characteristics - Filter - diaphragm pressure regulator with relieving. - Balanced poppet. - Double filtering action: by air centrifuging and by replaceable and reusable HDPE porous filter element. - Zinc alloy body reinforced technopolymer body with threaded aluminum insert connections - Wall mounting possibility with screws protected by covers. - Lockable handle by simply pressing it downwards in the desired position. - Transparent technopolymer bowls screwed to the body. - Shock resistant bowl technopolymer protections. - Manual and semi-automatic water drain valve; in the semi-automatic version the drainage happens when there is no pressure or by pushing the valve up-wards. - Possibility to see the water level on 60 also with bowl protection assembled. - Two pressure gauge connections with plug complete of seal. - Panel mounting bracket. - Automatic water drainage bowl available on request. - Fog type lubrication with variable section orifice according to the flow. - Possibility to see the min. and max. oil level on 60 also with bowl protection assembled. - Transparent technopolymer sight dome with adjusting handle. - Oil filling plug. Filter Serie Size Air Service 1_GB pressure 1700 Units regulator - Filter pressure + Lubricator regulator + Lubricator s 1 bar - 1, MPa Pressure gauge connections G 1/8" Weight with technopolymer body gr. 295 Weight with zinc alloy body gr. 560 Pressure range 0-2 bar / 0-4 bar 0-8 bar / 0-12 bar Filter pore size Bowl capacity 20 cm Indicative oil drip rate 1 drop every 00/600 Nl Oil type FD22 - HG2 Bowl capacity 6 cm Vertical on zinc alloy body 0 Nm on technopolymer body Min. operational flow at 6, bar 10 Nl/min..24
18 Air Service Units Filter + Pressure regulator + Lubricator Series v07c.s.g.t 0 = Zinc alloy body 1 = Technopolymer body c CONNECTIONS A = G 1/8" B = G 1/4" Filter pore size A = 5 s B = 20 C = 50 ADJUSTING RANGE A = 0-2 bar g B = 0-4 bar C = 0-8 bar D = 0-12 bar TYPE P = Bowl protection t S = Automatic drain PS = Bowl protection and Automatic drain Example: 17107A.B.C.P Service unit combination complete with filter - pressure regulator and lubricator size 1 G 1/8î connections, filter pore size 20, adjusting range 0-8 bar and bowl protections with technopolymer body. Adjustment characteristics - Zinc alloy body or reinforced technopolymer body with threaded aluminum insert connections. - Wall mounting possibility with screws protected by covers. - Transparent technopolymer bowls screwed to the body. - Shock resistant bowl technopolymer protections. - Double filtering action: by air centrifuging and by replaceable and reusable HDPE porous filter element. - Manual and semi-automatic water drain valve; in the semi-automatic version the drainage happens when there is no pressure or by pushing the valve up-wards. - Possibility to see the water level on 60 also with bowl protection assembled. - Diaphragm pressure regulator with relieving and balanced poppet. - Pressure adjusting lockable handle by simply pressing it downwards in the desired position. - Two pressure gauge connections with plug complete of seal. - Panel mounting bracket. - Automatic water drainage bowl available on request. - Fog type lubrication with variable section orifice according to the flow. - Possibility to see the min. and max. oil level on 60 also with bowl protection assembled. - Transparent technopolymer sight dome with adjusting handle. - Oil filling plug. Filter Serie Size Air Service 1_GB Pressure Units regulator - Filter + Pressure + Lubricator regulator + Lubricator s 1 bar - 1, MPa Pressure gauge connections G 1/8" Weight with technopolymer body gr. 75 Weight with zinc alloy body gr. 755 Pressure range 0-2 bar / 0-4 bar 0-8 bar / 0-12 bar Filter pore size Bowl capacity 20 cm Indicative oil drip rate 1 drop every 00/600 Nl Oil type FD22 - HG2 Bowl capacity 6 cm Vertical on zinc alloy body 0 Nm on technopolymer body Min. operational flow at 6, bar 10 Nl/min..25
19 Series 1700 Air Service Units High sensitive air pressure regulator with high flow rate relieving g 17112B.g ADJUSTING RANGE A = 0,1-2 bar B = 0,1-4 bar C = 0,1-7 bar Example: 17112B.C Pressure regulator with G 1/4" 0,1-7 bar Adjustment characteristics - Accurate capacity to maintain set pressure. - Sensitivity combined with high relieving rates. - High flow rate with extremely low pressure drop. - Pressure adjusting lockable handle by simply pressing it donwards in the desired position. - Body made with anodized zoll aluminium alloy - Two pressure gauge connections with plug complete of seal. - Ring nut for panel mounting. - Once set, a constant bleed of air maintains the accuracy of the regulator. - This controlled release is a charasteric, not a fault. High Serie Size Air Service 1_GB sensitive 1700 Units air - pressure High sensitive regulator air pressure with high regulator flow rate relieving with high flow rate relieving s Connections G 1/4" 10 bar - 1 MPa Pressure gauge connections G 1/8" Weight gr. 50 Pressure range 0,1-2 bar / 0,1-4 bar 0,1-7 bar Any Air flow (inlet pressure 10 bar) 5 Nl/min 20m filtered air and Fluid preferably non lubricated.26
20 Air Service Units Accessories - Pressure Switch complete with adapter Series 1700 t 17t TYPE 14A = Pressure switch adapter 14B = Pressure switch 14C = Pressure switch complete Example: 1714C Pressure switch complete with adapter. Connection - The pressure switch complete with adapter has to be assembled between two elements of the FRL group. It cannot be utilized separately or at the end of the FRL group. - The pressure switch can be set at desired pressure (pressure range from 2 to 10 bar) by rotating the adjusting screw. - The electrical connection is made by mean of a 15 mm connector DIN 4650 type C. - The microswitch contact could be normally closed or open (change over switch). Accessories Serie Size Air Service 1_GB 1700 Units - Pressure - Accessories Switch complete - Pressure with Switch adapter complete with adapter s 1 bar - 1, MPa Weight gr. 160 Microswitch capacity 1A Microswitch Maximum voltage 250 VAC Grade of protection (with connector assembled) IP 65 Adjusting range 2-10 bar Any.27
21 Series 1700 Air Intake Air Service Units Accessories Air Intake - "H" profile Accessories Serie Size Air Intake Service 1_GB "H" Units profile - Accessories Weight gr H Weight gr. 50 Fixing bracket Fixing bracket Air Accessories Fixing Service bracket Units Weight gr M5 Weight gr. 20 Assembling kit Assembling kit for manifold regulators 1716v 170M6 0 = Standard 5 = for progressive start-up val- Weight gr. 15 Weight gr. 20 Air Accessories Assembling Service Units kit for manifold regulators Pressure gauge 17070v.s A = Dial ø40 B = Dial ø50 SCALE A = Scale 0-4 bar s B = Scale 0-6 bar C = Scale 0-12 bar Air Accessories Pressure Service gauge Units.28
22 Air Service Units Spare parts Series 1700 Filter Pos. Codice Descrizione 1 RS/1701/10 Front tab 2 RS/1701/11 Rear tab RS/OR 2125 Seal 4 RS/1701/1 RS/1701/52 RS/1701/5 Porous filter element 20 Porous filter element 5 Porous filter element 50 5 RS/1701/7 Bowl protection 6 RK1701A/01 Filter bowl c/w drain valve 7 RK1701A/018 Filter bowl c/w automatic drain A RK1701A/014 RK1701A/021 RK1701A/022 Filter group assembly 20 Filter group assembly 5 Filter group assembly 50 Spare Serie Size Air Filter Service 1_GB 1700 partsunits - Spare parts Coalescing filter Pos. Codice Descrizione 1 RS/1701/9 Front tab 2 RS/1701/94 Rear tab RS/OR 2125 Seal 4 RK1701A/027 Coalescent group RS/1701/7 Bowl protection 6 RK1701A/01 Filter bowl c/w drain valve 7 RK1701A/018 Filter bowl c/w automatic drain Air Spare Coalescing Service partsunits filter.29
23 Series 1700 Air Service Units Spare parts Panel mounting pressure regulator Pos. Codice Descrizione 1 RS/1701/12 Lock nut 2 RS/1701/ Adjusting knob RS/1701/2 Adjusting support 4 RK1701A/016 Adjusting screw assembly 5 6 RS/1701/0 RS/1701/29 RS/1701/28 RS/1701/1 RK1701A/012 RK1701A/024 Spring 0-2 bar range Spring 0-4 bar range Spring 0-8 bar range Spring 0-12 bar range Diaphragm assembly Diaphragm assembly w/o relieving 7 RK1701A/02 Nozzle c/w poppet 8 RK1701A/020 Plug c/w seal G1/8 Air Spare Panel Service mounting partsunitspressure regulator Modular pressure regulator Pos. Codice Descrizione 1 RS/1701/12 Lock nut 2 RS/1701/ Adjusting knob RS/1701/2 Adjusting support 4 RK1701A/016 Adjusting screw assembly 5 6 RS/1701/0 RS/1701/29 RS/1701/28 RS/1701/1 RK1701A/012 RK1701A/024 7 RS/1701/11 Rear tab Spring 0-2 bar range Spring 0-4 bar range Spring 0-8 bar range Spring 0-12 bar range Diaphragm assembly Diaphragm assembly w/o relieving 8 RK1701A/020 Plug c/w seal G1/8 9 RS/1701/10 Front tab 10 RK1701A/025 Poppet c/w spring 11 RS/OR 2125 Seal 12 RS/1701/2 Plug Air Spare Modular Service parts pressure Units regulator.0
24 Air Service Units Spare parts Series 1700 Lubricator Pos. Codice Descrizione 1 RK1701A/026 Lubricator sight dome assembly 2 RS/OR 5x1,5 RS/OR 2075 Seal 4 RS/1701/4 Venturi diaphragm 5 RS/1701/11 Rear tab 6 RS/1701/10 Front tab 7 RS/OR 2125 Seal 8 RS/1701/7 Bowl protection 9 RS/1701/41 Lubricator bowl 10 RS/1701/47 Oil tube Air Spare Lubricator Service partsunits Filter-pressure regulator Pos. Codice Descrizione 1 RS/1701/12 Lock nut 2 RS/1701/ Adjusting knob RS/1701/2 Adjusting support 4 RK1701A/016 Adjusting screw assembly 5 6 RS/1701/0 RS/1701/29 RS/1701/28 RS/1701/1 RK1701A/012 RK1701A/024 7 RS/1701/11 Rear tab Spring 0-2 bar range Spring 0-4 bar range Spring 0-8 bar range Spring 0-12 bar range Diaphragm assembly Diaphragm assembly w/o rel. 8 RK1701A/020 Plug c/w seal G1/8 9 RS/1701/10 Front tab 10 RK1701A/025 Poppet c/w spring and seal 11 RS/OR 2125 Seal 12 RS/1701/1 RS/1701/52 RS/1701/5 Porous filter element 20 Porous filter element 5 Porous filter element 50 1 RS/1701/7 Bowl protection 14 RK1701A/01 Filter bowl c/w drain valve 15 RK1701A/018 Filter bowl c/w automatic drain A RK1701A/014 RK1701A/021 RK1701A/022 Filter group assembly 20 Filter group assembly 5 Filter group assembly 50 Air Spare Filter-pressure Service partsunits regulator.1
Series 1700 Size
.84 .85 Air Service Units Filter 17401c.s.t c CONNECTIONS B = G 1" Filter pore size A = 5 s B = 20 C = 50 t TYPE S = Automatic drain Example: 17401B.B Filter size with G 1" connections and filter pore
More informationAir Service Units Filter pressure regulator + Lubricator - Size 1. Series Technical characteristics. Construction and working characteristics
ir Service Units Filter pressure regulator + Lubricator - Size Series 00 Construction and working characteristics - Zinc alloy body or reinforced technopolymer body with threaded brass insert connections.
More informationSeries Airplus Size 1
Size 48 4 42 * 8 76 55 24 27.5.5 G/4 - G/8 Example : T7BL : size, Lubricator with Technopolymer threads, G/4" connections Inlet pressure (bar) 2,5 4 6, Pressure drop (bar), 2 4 6 8 2 4 6 Flow (Nl/min)
More informationAir treatment filter EZF G 3/8 - G 1/2 - G 1
EZ filter EZF G 3/8 - G 1/2 - G 1 Filters series "EZF" are produced with connections G 3/8, G 1/2 and G 1; they are available with various degrees of filtration and with manual, semiautomatic or automatic
More informationwith interchangeable cartridges: 1/8, 1/4 and 3/8 threaded or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm
Series MD coalescing filters New Ports with interchangeable cartridges: threaded (1/8, 1/4, /8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 1 mm. Modular assembly Bowl with technopolymer
More informationAir service units filters, regulators and lubricators
filters, regulators and lubricators Legris offers an extensive range of filters, regulators and lubricators, including individual units and combinations. s - eliminate dust and coagulation from compressed
More informationAir service units series X G1/4 to G3/4
Air service units series X FX Filter.042 RX Pressure regulator.044 FRX Filter/regulator.046 OX Lubricator.048 FROX Two-piece air service unit.050 KX Ball valve.052 VMX 3/2-way inline valve.053 DAX Soft
More informationModular line 042 1/4. Regulator. Regulator
1 Modular line 1/ Regulator 5..5 3..3 1..1 3,5 1 7 INLET PRESSURE = 1 (1 ),3,,5 1,5 3 1 8 17,5 1 15 1 Regulator * Sensitive high performance model with rolling diaphragm; high stability with low load losses
More information10 mm solenoid valves on manifold with multiconnection D-SUB
0 mm solenoid valves on manifold with multiconnection D-SUB Air inlet from both sides Exits with ø4 push-in fittings ø4 Panel mounting possible with two M3 screws on the top side 3/2 solenoid valves Electrical
More informationMOUNTING BRACKETS. Dimensional Drawing - Mounting Options
/ MOUNTING BRACKETS Dimensions: mm Dimensional Drawing - Mounting Options Series Side Mounting Brackets Kit: PAT503860001 Series Side Mounting Brackets Kit: PAT503860002 E G F C D ØH B A Series A B C D
More informationDimensional Drawing - Mounting Options
Dimensions: mm Dimensional Drawing - Mounting Options Side Mounting Brackets Kit: PAT50386002 E G F C D B A A B C D E F G 25 11 20 10 6,3 50 1,9 Wall/Panel Bracket Kit: P699AT502467001 K J ØH D M 01813GB-2015/R01
More informationDrain Type Semi-Automatic
INLINE FILTERS Features Pipe or Bracket Mounted Point of Use Filters Quick Release Bayonet Bowl Connection Easy Change Filter Elements Transparent Filter Bowl For Element Inspection Semi Automatic (pull
More informationHow to Order 02 1/4. Thread type Nil Rc N NPT * * Semi-standard
Filter Regulator IW Series Two types are available: adjustable set pressure type and fixed set pressure type. Low/High temperature and external parts copper-free types can be selected. Pressure gauge connecting
More informationAir Preparation Products 652 Series Filter Regulator (FR) for Process Industry Applications
Air Preparation Products Series Filter Regulator (FR) for Process Industry Applications www.asconumatics.eu Table of Contents Series Particulate Filter/Regulator 2 Particulate Filter 5 Regulator 8 Kits
More informationSeries IW. Filter Regulator
Standard Specifications Model IW212 IW213 IW215 IW222 Adjustable type (Basic) Fixed type Maximum supply pressure Max. 1. MPa.3 to 1. MPa Set pressure.2 to.2 MPa.2 to.3 MPa.2 to.5 MPa.14 MPa Air consumption
More informationMX2 ports: G3/8, G1/2, G3/4 - MX3 ports: G3/4, G1 Modular Bowl with technopolymer cover and bayonet-type mounting
> Filters Series MX CATALOGUE > Release 8.5 Filters Series MX MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Modular Bowl with technopolymer cover and bayonet-type mounting Removal of impurities and condensate
More informationFilters, Gauges, Regulators
Filters, s, Regulators SCFM = Cubic ft/min at Ambient Condition s Sold Separately s...1/4" Flow SCFM...21 s...1/4" Flow SCFM...15 Filters - Construction Mini 1/4" 3000 Regulators Without Mini 1/4" 3100
More informationAIR PREPARATION PRODUCTS. Table of Contents
AIR PREPARATION PRODUCTS Table of Contents Page Air Filters................................................. 5-7 Oil Removal Filters......................................... 8-9 Regulators..............................................
More informationBL84 - Excelon Plus Modular System Filter/regulator - Lubricator Combination Units
BL84 - Excelon Plus Modular System > Port size: 3/8... 3/4 (ISO G/PTF) > Unique Quikclamp connection system offers full modularity > 40 micron particle and high efficiency water removal (> 98%) > Shut
More informationInstallation Components AirCare Air Preparation Systems
Care Preparation Systems Modular Line Filters 602104 602106 602108 * Transparent 602109 nylon liquid level indicator -18 lens. to 79 C Body Bowl Material icle Zinc Aluminum Zinc* Aluminum* Sintered Polypropylene
More informationAir preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview unit three-piece,, unit two piece,, Filter-regulator,,, 9 Filter-water-separator,, 9 Dust filter,, 9 Pressure regulating
More informationModular FRLs. Pneumatic Mini Series G 1 /8 - G 1 /4. Modular Junior Series G 1 /8 to G 3 /8 Modular Maxi Series G 1 /4 to G 3 /4 Modular Series G1
Modular FRLs Pneumatic Mini Series G /8 - G /4 Modular Junior Series G /8 to G 3 /8 Modular Maxi Series G /4 to G 3 /4 Modular Series G Catalogue no. 258G-ca Mini IndexFRLs Mini FRLs Page o. Introduction
More informationSeries P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
More informationVALVES. V40/V41 Mini ISO Star Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot Actuated ISO / VDMA Size 18 mm
V40/V4 Mini ISO Star Valves x/, / and /, Solenoid and Actuated ISO 407- / VDMA 4 6 Size 8 mm Compact design and high performance Flexible Sub-base system True multipressure system Sandwich regulators and
More informationCompact design suitable for use in reduced mounting space. CONTROL > Directly operated solenoid valves Series PN GENERAL DATA
> Directly operated solenoid valves Series PN Directly operated solenoid valves Series PN 3/-way Normally Closed (NC). The solenoid valves can be mounted on a single base (with M5 ports) as well as on
More information26 SERIES FILTER Operating Instructions and Parts List
90-400* (revised 01/05) Questions regarding this form should be directed to the following: 732-390-8480 26 SERIES FILTER Operating Instructions and Parts List Application: The 26 Series Filter is rugged,
More informationL1000/L3000/L4000/L8000-W Series
Lubricator standard white Series L1/L3/L4/L8-W Series Supplies fine oil mist. Port size: 1/8 to 1 JIS symbol Specifications Descriptions L1-W L3-W L4-W L8-W Appearance Working fluid Compressed air Max.
More informationAir Preparation Products
Air Preparation Products Series Series Filter Regulator Lubricator (FRL) www.asco.com Table of Contents / Series Product Overview 2 Particulate Filter 4 Coalescing Filter 8 Adsorber Activated Carbon 8
More informationParker Global Air Preparation System
Parker Global System Parker Global System A complete air preparation system 7 Parker Global System Parker Global Air Preparation System Global. Economical. Modular. Performance you need, wherever you need
More informationBL84 - Excelon Plus Modular System Filter/regulator - Lubricator Combination Units
BL84 - Excelon Plus Modular System > Port Size 3/8" to 3/4" (PTF/ISO G) > Quickclamp connection system offers full modularity > Shut off valve & Filter/regulator with tamper resistant feature > Metal bowl
More informationAir Line Modulars Each component is engineered to connect easily modular FRL assemblies manual shut off
Air Line Modulars Each component is engineered to connect easily without the use of inserts and special tools. Standard buttonhead screws are used to join components, combined with the new modular design
More informationStainless Steel FRLs
Stainless steel FRLs Stainless Steel FRLs Units 205 Stainless steel FRLs - PF504 Series - 1/4 Inch Ports PF504 Filter Miniature Features Stainless steel construction handles most corrosive environments
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
More informationCORRECT SELECTION OF COMPRESSED AIR PROCESSING EQUIPMENT
CORRECT SELECTION OF COMPRESSED AIR PROCESSING EQUIPMENT Most SHAVO units are available in port sizes from 1/8 to 2 and there is a wide choice of filter elements and regulating and relief spring ranges
More informationFilters, regulators, and lubricators
Filters, regulators, and lubricators 28 filters 3/8", 1/2", and 3/4" Ports Technical data Polycarbonate bowl Polycarbonate bowl guard Metal bowl Metal bowl sight glass Filter body Manual drain Auto drain
More informationCOILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
More informationAir preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview Air preparation unit three-piece 22, 23, 26 29 37, 39 Air preparation unit two-piece 22, 23, 26 29 37, 39 Filter-regulator
More informationBus / Coach Door Obstruction Detection
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Bus / Coach Door Obstruction Detection Bulletin 0600-B78 Door Sensing
More information50 SERIES FILTER F50B Series F50B-04 pictured Application ANSI SYMBOL Primary air filters are designed to separate liquid, water, rust, pipe scale, an
FRL Products and Accessories High Flow FRL Series 50 Series Filters 44 50 Series Regulators 45 50 Series Pilot Operated Regulators 46 50 Series Lubricators 48 50 Series Filter/Regulator/Lubricator Combinations
More informationAir Preparation Products. For Low Temperature Service. Parker Hannifin Corporation Pneumatic Division Richland, Michigan
Air Preparation Products For Low Temperature Service Catalog -E Miniature R Series R Regulators Miniature Miniature Regulators /8", /" Basic /8" Body R-C Non- R-MC Features Diaphragm operated for fast
More informationARO-FLO SERIES FILTERS, REGULATORS AND LUBRICATORS
ARO-FLO SERIES FILTERS, REGULATORS AND LUBRICATORS For more than years, Ingersoll Rand ARO has been an industry leader in the design and ARO-Flo Series manufacture of compressors, pneumatic tools, and
More information5/2-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm
> Series E valves and solenoid valves Series E valves and solenoid valves 5/-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm Series
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
More information15 mm Pilot Valve. More technical specifications are reported in the following pages. 1
15 mm Pilot Valve The 15 mm pilot valve has been designed and developped by Amisco as a logical evolution of the traditional product range manufactured for the pneumatic market. The 15 mm solenoid valve
More informationBL68 - Olympian Plus plug-in system Filter/regulators and lubricators
> > Port size: 3/4... /2 (ISO G/ PTF) > > Complete air processing units pre-assembled, ready to install Technical features Medium: Compressed air only Maximum operating pressure: 7 bar (246 psi) Pressure
More informationPURESTREAM -FRL PURESTREAM - FRL. Installation / Operating / Maintenance Instructions Filter Series F1. Specifications.
PURESTREAM FRL I S F1 0 01/OM PURESTREAM FRL Installation / Operating / Maintenance Instructions Filter Series F1 I S F1 0 01/OM Trouble shooting Trouble Cause Remedy 1. Restricted air flow Filter element
More informationValves and Solenoid valves Series E 2/
CATALOGUE > Release 8.6 > Series E valves and solenoid valves Valves and Solenoid valves Series E 5/-way monostable/bistable - 5/3 CC CO CP With outlets on the body - For individual or manifold assembly
More informationB0123HF and B0123HE Pressure Regulators. B1279UL Air Filter
Instruction MI 011-157 October 2013 B0123HF and B0123HE Pressure Regulators and B1279UL Air Filter ii Contents Introduction... 1 General... 1 Specifications... 1 Installation... 1 Part No. B0123HF Regulator...
More informationISO Cylinders Compact Cylinders TC08 Series Plastic Finger Tight Fittings
ISO 632 Cylinders ISO 15552 Cylinders Compact Cylinders TC08 Series Pilot Valves 207-208 209-212 213-21 215 TC15 Series Pilot Valves TC08 Series Solenoid Valves CD7 Series Solenoid Valves CD12 Series Solenoid
More informationP3Y Series Air preparation system. 3/4 & 1 Body ported
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding P3Y Series Air preparation system 3/4 & 1 Body ported Catalogue no.
More informationVALVES. Wilkerson. Filters, Regulators & Lubricators. dixonvalve.com Customer Service:
FACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURI VALVES Wilkerson Filters, Regulators & Lubricators dixonvalve.com Customer Service: 877.963.4966 Filters
More informationElectro-Pneumatic Linear Positioner Installation and Operation Instructions B GB
Installation and Operation Instructions 99.66.02-B GB Description of Device (4-~20mA) is the advanced control device for a linear control valve that provides unparalleled stability in difficult environments
More informationHERION. MINI ISO VALVES Size 18 mm, V40 / V41 SERIES Size 26 mm, V44 / V45 SERIES. Flexible subbase system with a wide range of accessories
MINI ISO VALVES Size 18 mm, V40 / V41 SERIES Size 26 mm, V44 / V45 SERIES HERION ISO 15407-1 / VDMA 24563 Brochure N-288 Compact design and high performance The right spool technology for critical pneumatic
More informationRelated Products VR4151/4152 Relay Valve
Related Products VR4151/4152 Relay Valve Appropriate output sequences are affected according to the signal received from the machanical valve. Specifications 1 Fluid Air Operating pressure 0 to 1.0MPa
More informationPrecision Control Devices
Precision Control Devices Electro-Pneumatic Servo Pressure Controllers Electro-Pneumatic I/P, E/P, & P/I Transducers Diaphragm Regulators & Relays Diaphragm Cylinders Filter - Regulator - Lubricators Gauge
More informationW1000/W3000/W4000/W8000 Series
Filter and W/W/W/ Series New Series of m elements for dust removal, and m elements for tar removal : / to JIS symbol Specifications Descriptions Appearance W W W nic sensor Pressure Working fluid Max.
More informationSub-Base Mounted Valves to ISO 5599/2 Fielbus Electronics - 239
Valves Sub-Base Mounted Valves to ISO 5599/2 Fielbus Electronics - 239 General Information ISO 1, ISO 2 and ISO 3 valve series incorporate the famous Numatics lapped spool and sleeve for ultimate service
More informationPage General Purpose Filter Replacement Filter Elements Bowl Assemblies Accessories & Optional Extras
New Comprehensive Accessory & Maintenance Kit Listing Page.009 General Purpose Filter Replacement Filter Elements Assemblies Accessories & Optional Extras Page.05 Relief Valve Accessories and Optional
More informationSR1A-A2. Functional Description HA /2012. Directly Operated Pressure Relief Valves. Replaces HA /2010. Screw-in cartridge design
Directly Operated Pressure Relief Valves SRA-A2 HA 5063 7/202 3/4-6 UNF p max 350 bar (5080 PSI) Q max 30 L/min (7.9 GPM) Replaces HA 5063 8/200 Screw-in cartridge design 4 pressure ranges Pressure setting
More information3000 Series filters 3/4" and 1" Ports
38 filters 3/4" and 1" Ports Technical data Metal bowl Metal bowl sight glass Filter body Manual drain Auto drain Standard filter Coalescing filter Seals Filter baffle Aluminum Nylon Aluminum Brass + nitrile
More informationAir preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview Air preparation unit three-piece 8 11 12 16, 17 Air preparation unit two piece 8 11 12 16, 17 Air preparation Filter-regulator
More informationSubject: Pneumatic Training Kit with portable Air Compressor
MSME TOOL ROOM: HYDERABAD (CENTRAL INSTITUTE OF TOOL DESIGN) Balanagar, Hyderabad 500 037 TEL.NO.23772747, 23776168 FAX No.0-4023772658 E-mail:citdpurchase@citdindia.org Visit us: www.citdindia.org. TENDER
More informationSafety Shut-off Valve SL/SID/RSL
Safety Shut-off Valve SL/SID/RSL High accuracy shut-off Low pressure loss Operating temperature up to -30 C Easy maintenance DVGW-approval Applications They are designed for transmission and distribution
More informationAIR PREPARATION UNITS 1/8" NPT & 1/4" NPT SERIES light
PNEUMATIC GROUP AIR PREPARATION UNITS 1/" NPT & 1/" NPT SERIES,,,, MPa 1,,,,, MPa 1, 1 3 5 7,,,, MPa,, 1, MPa, Made in Germany MR- E MPa 1,,,,, 1,, p max= Port size Recommended flow Type Page No. (l/min)*
More informationImpulse Lubricator. Standard Specifications
Series 00/10 Intermittent discharge of small, constant amounts to the sliding parts Directly supplies a constant amount of oil just before the lubrication point Standard Specifications Model 1/8 (A) 1.0
More informationTransmitters: Relay Valve VR4151/4152
Relay Valve VR4151/4152 Appropriate output sequences are affected according to the signal received from the mechanical valve. VR4151 VR4152 Precautions Be sure to read before handling. Refer to pages 5-11-2
More informationnickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
More information74 Series Combination Filter/Regulator and Lubricator Unit, featuring an in-line shut-off valve, and Quikclamp system.
NCA-33 January 1998 Supersedes November 199 EXCELON Series System Features...2 EXCELON Series Product Features... Filters F72G General Purpose Filters... F73G General Purpose Filters...8 F7G General Purpose
More informationMoniteur INSTALLATION & OPERATING INSTRUCTIONS. SERIES 40 Positioners. Installation and Operating Instructions Series 40 Positioners.
INSTALLATION & OPERATING INSTRUCTIONS SERIES 40 Positioners Form IO2-0406 Description of Device Moniteur's Series 40 pneumatic (3-15psi) and electropneumatic (4-20mA) positioners are advanced control devices
More informationCOMPONENTS FOR SOLAR THERMAL SYSTEMS
COMPONENTS FOR SOLAR THERMAL SYSTEMS 2012 2 The CALEFFI SOLAR product range has been specially developed for use in solar thermal systems, where high temperatures can normally be reached and where, depending
More informationINSTRUCTION AND MAINTENANCE MANUAL FR95 PRESSURE REGULATOR
Enidine / Conoflow 105 Commerce Way Westminster, SC 29693 Tel: (864) 647-9521 Fax: (864) 647-7993 WARNING Conoflow s products are designed and manufactured using materials and workmanship required to meet
More informationTotalPac 3 Deluge system Pneumatic release
(Optional) DESCRIPTION This TOTALPAC 3 integrated fire protection system by FireFlex Systems Inc. consists of a deluge system trim totally preassembled, pre-wired and factory tested. All electrical and
More informationControl Valve Specifications
Control Valve Specifications Available in two-way, three-way and four-way configuration and with port sizes from 10-32UNF through to 1/2"NPT. The N2V & N3V1 offering is a direct acting solenoid poppet
More informationPressure Control Equipment
Control High-pressure Precision General Purpose Special Fluid/Deionized Water (Pure Water) Detection Control Control (General purpose, high-pressure, precision, vacuum, special fluid, deionized water (pure
More information40-501, , ,
-9 Silencer, plastic. -5, -5 Silencer, sintered bronze. - Flow control silencer. -5 Check valves. -5 Hand sliding valves. -5, -5 Quick couplings. -5 Miniature regulator, screw-in type.6-55 Check valves.7-56,
More informationLubricators MS-LOE, MS series
Lubricators MS-LOE, MS series Lubricators MS-LOE, MS series Product range overview MS series service units Type Size Pressure regulation range [bar] Grade of filtration [μm] Pneumatic connection in housing
More informationOrifice flowmeter F O N4
Special features Suitable for any mounting positions without reduction in accuracy Complies with requirements for treatment and disinfection of swimming/ bathing pools (DIN 9 643) Simple installation Direct
More informationElectrically operated spool valve. The manual override is detent and is operated by screw driver.
Valves > electrically operated valves > Series M-07 Technical details Connection G1/ Nominal size Temperature range Medium Series M-07 page Materials 9 mm -10 C... +70 C Filtered, oil-free and dried compressed
More informationPower Valve Precision Regulator
Power Valve Precision Regulator VEX Series High precision, large capacity relief regulator port large exhaust capacity pressure reducing valve which utilizes a nozzle flapper mechanism available as air
More informationInverted Dual High-Pressure Fluid Filter Assemblies
Instruction Sheet P/N 1093-04 Inverted Dual High Pressure Fluid Filter Assemblies Introduction WARNG: High pressure fluids are hazardous. To prevent serious injury when installing and servicing filters,
More informationSeries ITV0000. Compact Electro-pneumatic Regulator ITV N. IITV00 02 n. How to Order F.R.L. AV AU AF AR IR VEX AMR ITV IC VBA VE VY1 G PPA AL
Compact Electro-pneumatic Regulator Series For single unit and single unit for manifold Pressure range 9 Option. MPa. MPa.9 MPa kpa Option How to Order N Power supply voltage 24 VDC ±% 2 to VDC Option
More informationAUTOMATION TECHNOLOGY. Air Preparation Units
AUTOMATION TECHNOLOGY Air Preparation Units 2 0 4 2 6 0 PSI 10 bar 4 8 6 PSI 10 bar 8 Versions* Description A50 Filter-Regulator- 1/8" Lubricator 1/4" 1/4" 3/8" 3/8" 1/2" 3/4" Gauge & bracket included
More informationSand Trap Louvers OSTL 300 SERIES. Sand Trap Louvers
Model : OSTL GI 341 Description: OPTIMA make Sand Trap Louver is used as pre-filter for the protection of air conditioning plants in area exposed to extreme levels of industrial pollution. It has a high
More informationnickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4
More informationseries UK Poppet valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 - G 1 DESCRIPTION MATERIALS TECHNICAL DATA Poppet valves series UK
DESCRIPTION Valves series UK are produced in the /, 3/ and 5/ functions. In the 3 port control version with small pilot system, sizes G 1/8 and G 1/4, support the 15 mm direct acting valve (type UMCSV
More information02/97 N/** Our policy is one of continued research and development. We therefore reserve the right to amend,
Nugget 0 V0 Series Integrally Ported 5/2 and 5/3 Spool Valves Solenoid Actuated and Pilot Operated Ø, Ø mm or High flow from mm body width Low power solenoids with a range of voltages Use valves singly
More informationTypes 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators
Bulletin 71.4 D0163X012 Type 1808 February 17 Types 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators Type 1808 Type 1808A Figure 1. Types 1808 and 1808A Pilot-Operated Relief Valves
More informationINSTRUCTION AND MAINTENANCE MANUAL GFH45 PRESSURE REGULATOR
Enidine / Conoflow 105 Commerce Way Westminster, SC 29693 Tel: (864) 647-9521 Fax: (864) 647-7993 WARNING Conoflow s products are designed and manufactured using materials and workmanship required to meet
More informationADVANCED CUSTOMIZED ELECTRO PNEUMATIC TRAINER (PRODUCT CODE: SAP 20B)
The Advanced Customized Electro Pneumatic Trainer (SAP 20B) is capable of being used to demonstrate the design, construction and application of electro-pneumatic components and circuits. Objectives:- The
More informationVALVES ISO 5599/1, SERIES IPV-ISV
VALVES ISO 5599/, SERIES IPV-ISV The assembly surface dimensions of ISO, ISO2 and ISO 3 valves are to ISO5599-. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid
More informationAir Controls. Air Regulators /0 Mini gun mounted air flow regulator 1/4 BSP(F) x 1/4 BSP(M) C/w glass fronted gauge.
Air Controls Air Regulators 78-210/0 Mini gun mounted air flow regulator 1/4 BSP(F) x 1/4 BSP(M) C/w glass fronted gauge. Quick Detach Hi-Flo Air Couplings & Tails 50-401 Quick detach doubleacting coupling1/4
More informationPRESSURE REGULATORS. GUIDE to REGULATORS and SERVO VALVES
Master Pneumatic regulators are made in a wide range of sizes to suit nearly all industrial requirements for pneumatic pressure regulation. Good pressure regulation is essential to the efficient use of
More informationshort name: 3WL.IG* technical product sheet created :57 1/6 3-way ball valve F/F PN 63 with pneumatic actuator hard anodized aluminum
with pneumatic actuator hard anodized aluminum technical product sheet short name: 3WL.IG* 3-way ball valve F/F PN 63 E-Box MV Port Modell G Kugel Bauart RE06 RE06 1 1 1/ 1/ 3/" 1 1/ 1 1/ 3/" 1 1/ 1 1/
More information5-27 A IR PREPARATION FILTERS: HIGH FLOW H IGH FLOW AIR FILTER SERIES AF AF (1 1 2) AF (2) S TOCKED AF (1 1 2) AF (2)
查询 ARJ1020F-M5-06 供应商 H IGH FLOW AIR FILTER SERIES AF A IR PREPARATION 捷多邦, 专业 PCB 打样工厂,24 小时加急出货 FILTERS: HIGH FLOW 5-27 Port Sizes 1 1 2-2 Rc 5µm filter element High efficiency drainage Bowl guard standard
More informationModel Model 815
Model 600004 Model 600204 Model 85387 Model 600104 Model 815 ir line products and accessories ir couplers and nipples............................... 196 low guns, tire inflators and siphon sprayers.............
More information1 Pneumatics. Transmitters VR4151 VR4152 VR1210 VR1220 VR1210F VR1220F VR1211F VR VR3200 VR3201 VR3100 VR3110
Best 1 Pneumatics Transmitters Relay valve P. 1900 Side piping: 30 x 53 x 91 Bottom piping: 30 x 8 x 91 VR151 VR152 Effective area (mm 2 ) Number of ports Function 7 5 Metal Spool Shuttle valve P. 1902
More informationDifferential Pressure Gauges (701P Series)
Applications Equipped two Process Connections Indicating low and high pressure Measuring differential pressure as well as liquid or flow levels Recommended to use 3-way & 5-way valve manifold Pressure
More informationInstallation Components AirCare Air Preparation Systems
Modular Line Filters 602104 602106 602108 602109 250 psig / 17 bar Body Material icle Zinc Zinc* * Sintered Polypropylene 40µ 602104 Drain Type Port PTF ¹ ₄ 602106 Manual ³ ₈ A B C Dia. 5.27 / 1.34 0.75
More informationTotalPac 3 Double interlock Preaction, Electric/Pneumatic release Remote controlled system
(Optional) DESCRIPTION This TOTALPAC 3 integrated fire protection system by FireFlex Systems Inc. consists of a preaction system trim totally preassembled, pre-wired and factory tested. All electrical
More information5.22 A IR PREPARATION FILTERS: HIGH EFFICIENCY H IGH FLOW AIR FILTER SERIES AF AF (1 1 2) AF (2) AF (1 1 2) AF (2) S TOCKED
5.22 FILTERS: HIGH EFFICIENCY H IGH FLOW AIR FILTER SERIES AF Port Sizes 1 1 2-2 Rc 5µm filter element High efficiency drainage Bowl guard standard AIR FILTER MODELS AF800/900 AIR FILTER MODELS AF811/911
More information