HENAN SICHENG CO., LTD

Transcription

1 931A Wheel Loader Features: 931A Wheel Loader is our company absorbing foreign advanced technology, the development of a self-loader, machine adopts streamlined design, layout reasonable, harmonization. Well-known manufacturers of split two-variable system makes machine more stable and reliable performance, maintenance, versatility, comfort and operability are greatly improved, and compared to the same industry, the company 931A loader has the following advantages: three, and the shortest (9.9s), plus the long arm of unloading the highest (3230mm), minimum turning radius (4629mm), uninstall the farthest (1168mm). YC6108G engine, power 92 kilowatts, power is more powerful; two-variable system using split structure, maintenance is more convenient; YJ315X three components of the single-stage single-phase torque converter, variable torque coefficient (3.23), high efficiency; fixed shaft speed box structure is compact, reliable, convenient maintenance and repair; drive axle quality, load capacity, performance and stability. Hydraulic system: Machine's hydraulic system uses the German DIN standard "cone -0" double seal, sealing, and anti-leakage strong; new multi-way valve, easy operation, flow loss, high efficiency of the system, the whole operation more efficient; working system and steering system uses an independent control, system reliability, easy maintenance, the failure rate at the end and easy to troubleshoot. Appearance of the interior: The combination of advanced instrument panel and anti-false start power locks, filling the people-oriented concept. 50 Loader-level cab, spacious and luxurious. No frame on three sides, "Korea Green" glue glass, stylish, innovative, sound and heat insulation, noise reduction. Visual oil standard, oil sight intuitive and easier to maintain. The human joystick cab design, location and height of more reasonable and comfortable.

2 Structure: By strengthening the front frame structure, stronger, more durable; body lengthened 100mm, weight increased more than 200 kilograms; machine more robust, more breakout force. Radio labeling arm, short rod, horizontal layout of the work of the boom cylinder installations, work more efficiently and faster. Electrical system: Maintenance-free batteries, reliable performance. Use of integrated instrument panel, pleasing in appearance, visibility good. Heater system configuration, operating environment comfortable. Parameters: Bucket Capacity (m3): 1.76 Rated load (t): 3 Total mass (t): Boom lifting time (s): 6.0 Three and time (s): 9.9 Maximum unloading height (high discharge) (mm): 3230 Uninstall from the (mm): 1168 Maximum breakout force (kn): 103 Maximum grade ability : 25 Minimum turning radius (mm): 4629 Minimum ground clearance (mm): 350 Overall Dimensions L W H (mm) : Axle base (mm): 2607 Wheelbase (mm): 1800 Engine Type: YC6108G Rated Power (kw): 92 Rated speed (r / min): 2300 Maximum torque (N.m): 450 Minimum fuel consumption rate (g / Kw.h): 215 Torque converter Type: Single-stage single-phase And moment coefficient: 3.23 Transmission Type: hydraulic gear set shaft Number of gears: the top four after the second Maximum speed (km / h): 35 Front and rear axle Main Drive Type: spiral bevel gear reducer level Wheel deceleration type: spur gear planetary gear Tires Specifications: PR Steering System

3 Type: Articulated frame hydraulic steering Steering angle: 36 left and right Working hydraulic system Working pump: CBGj 2100 Working hydraulic system pressure (Mpa): 16 Brake System Brake: Single gas cap oil pipeline caliper disc brake wheel Parking brake: mechanical control with brake 952A Wheel Loader Features: 952A Wheel Loader is our company applying the latest technology and modern design tools developed by third-generation loader products. It uses internal common transmission system, double pump confluence of technology and reinforced frame design, comfort control in the machine, man, machine security, and so do a more scientific adjustment, advanced and mature technology widely used in home and abroad, and its excellent performance, high life, high reliability, high efficiency, low fuel consumption and reasonable economic costs of keeping the world's advanced level. Steyr WD615G220 Weichai turbocharged diesel engine with a power reserve of large, low fuel consumption, good dynamic performance. With flame preheating function, power shutdown operation. Pre-filter using the new composite to reduce engine wear phenomenon early. The pre-filter and two filters do not require maintenance, air resistance is small, pre-filter effect over

4 the desert air filter, mainly to solve the customers a poor environment, extend the maintenance cycle, the filter maintenance cycle extended 3 times. Hydraulic system: Hang one with dual variable gear system, machine has advanced structure, reliable, reasonable match with the host, the use of maintenance and simple. Hydraulic system and steering system: 1. The hydraulic system adopts the international advanced double pump confluence technology, energy loss, improve the overall fuel economy and operating efficiency. 2. Hydraulic control valve is located in front of the front frame, very easy maintenance. 3. Machine's hydraulic system pipes, using the German DIN standard "cone-o" double seal, sealing, and anti-leakage intensity. 4. Coaxial flow with hydraulic amplification, articulated steering systems, steering and flexible. 5. With high hydraulic oil tank, oil pumps to improve the effectiveness and prevent the pump suction air, to improve the life of the pump, repair pumps, valves and other hydraulic components, simply turn off the valve, no release of oil, has brought more to the maintenance and more convenient. Appearance of the interior: Cab: 1. Cab-type steel frame, beautiful appearance. 2. Use of integrated instrument panel, pleasing in appearance, visibility good. 3. Cab and chassis with vibration damping connection, reducing vibration and bumps, and take full account of the cab noise, sealing, to reduce the noise, dust and damage caused by the driver. 4. Using up and down, front and rear seat adjustable damping SN6 meet safety standards and ergonomics, increased comfort. 5. Standard heater. 6. Optional single cold freon environmental conditioning, with defrost function. 7. Optional audio. 8. Optional pilot control. Structure: 1. Before and after the optimal design of reinforced frame, more solid and durable. Rear frame with veneer "T"-shaped beam structure, reducing pressure and irregular type of weld, greatly improved reliability. 2. Articulated parts with double tapered roller bearings, not only increase the rigidity of articulated parts, and make it more reasonable force. 3. Up to 3.2 meters longer wheelbase, job stability, more breakout force. 4. Optimal design of single-arm, short rod, horizontal cylinder arrangement of working device, uninstall the height of high efficiency fast. Parameters: Bucket Capacity (m3): 3.0 Rated load (t): 5 Operating mass (kg): Three and time (s): 10.8 Maximum rise of force (kn): 175 Maximum grade ability : 25 Minimum turning radius (mm): 5890 Minimum ground clearance (mm): 415 Overall Dimensions: L W H (mm): (normal arm) (super-long arm) Axle base (mm): 3200 Wheelbase (mm): 2200 Engine:

5 Type: WD615G220 Rated Power (kw): 162 Rated speed (r / min): 2200 Maximum torque (N.m): 843 Rated fuel consumption rate (g / Kw.h): 215 Torque converter Type: twin-turbo an integrated approach And moment coefficients: 4.7 ± 50% Type: Planetary type hydraulic gear Number of gears: the first two latter Maximum speed (km / h): 36 Front and rear axle Main Drive Type: spiral bevel gear reducer level Wheel deceleration type: spur gear planetary gear Tires Specifications: PR Steering System: Type: Coaxial hydraulic flow amplified steering articulated frame Steering angle: 37 left and right Working hydraulic system Working pump: CBGj 3100 Working hydraulic system pressure (Mpa): 16 Brake System Brake: Single pipe oil caliper disc brakes gas cap Parking brake: mechanical control system of belt

6 953A Wheel Loader Features: 953A Wheel Loader is our company applying the latest technology and modern design tools developed by third-generation loader products. It uses a common transmission of domestic, k and reliable hydraulic system and reinforced frame design, comfort control in the machine, man, machine security, and so do a more scientific adjustment, advanced and mature technology widely used in home and abroad, its excellent performance, high life, high reliability, high efficiency, low fuel consumption and reasonable economic costs of keeping the world's advanced level. With Yuchai YC6M220Z-T10 (M7A01) diesel engine, power reserve of large, low fuel consumption, good dynamic performance. Has the power shutdown operation, optional flame preheating function. Pre-filter using the new composite to reduce engine wear phenomenon early. The pre-filter and two filters do not require maintenance, air resistance is small, pre-filter

7 effect over the desert air filter, mainly to solve the customers a poor environment, extend the maintenance cycle, the filter maintenance cycle extended 3 times. Hydraulic system: Hang one with dual variable gear system, machine has advanced structure, reliable, reasonable match with the host, the use of maintenance and simple. Hydraulic system and steering system: 1. Hydraulic system uses a single national popular single pump for mature technology, reliable quality, low failure, high efficiency. 2. Hydraulic control valve is located in front of the front frame, easy maintenance. 3. Machine's hydraulic system pipes, using the German DIN standard "cone-o" double seal, sealing, and anti-leakage strong. 4. Coaxial flow with hydraulic amplification, articulated steering systems, steering and flexible. 5. Pre-pressure hydraulic oil tank used to improve the suction effect of the pump to prevent air suction pump to improve pump life. Appearance of the interior: Cab: 1. Steel skeleton of the cab, the cab floor and can be split for easy, elegant appearance, strong and durable. 2. Independent of instrument sets, visual effect is good; combination switch, more convenient operation. 3. Cab and chassis with vibration damping connection, reducing vibration and bumps, and take full account of the cab noise, sealing, to reduce the noise, dust and damage caused by the driver. 4. Using up and down, front and rear damping adjustable seat, ergonomic safety standards and improved comfort. 5. Standard heater, optional audio. 6. Optional: fluorine-free environmentally friendly heating and air conditioning, with defrost function. Structure: 1. Before and after the optimal design of reinforced frame, more solid and durable. Box with large channel rear frame structure and reduce the pressure type and irregular weld, greatly improved reliability. 2. Articulated parts with double tapered roller bearings, not only increase the rigidity of articulated parts, and make it more reasonable force m in the short-wheelbase 1:2 arrangement, operation, high stability, small turning radius, low requirement on the site. 4. Optimal design of single-arm, short rod, horizontal cylinder arrangement of working device, uninstall the height of high efficiency fast. Parameters: Bucket Capacity (m3): 3.0 Rated load (t): 5 Operating mass (kg): Three and time (s): 10.8 Maximum rise of force (kn): 170 Maximum grade ability : 25 Minimum turning radius (mm): 5920 Minimum ground clearance (mm): 460 Overall Dimensions: L W H (mm): (normal arm) (super-long arm) Axle base (mm): 3000 Wheelbase (mm): 2200 Engine

8 Model: YC6M220Z-T10 (M7A01) Rated Power (kw): 162 Rated speed (r / min): 2200 Maximum torque (N.m): 900 Rated fuel consumption rate (g / Kw.h): 215 Torque converter Type: twin-turbo an integrated approach And moment coefficients: 4.7 ± 50% Transmission Type: Planetary type hydraulic gear Number of gears: the first two latter Maximum speed (km / h): 36 Front and rear axle Main Drive Type: spiral bevel gear reducer level Wheel deceleration type: spur gear planetary gear Tire Size: PR Steering System: Type: Coaxial hydraulic flow amplified steering articulated frame Steering angle: 35 left and right Working hydraulic system: Working pump: CBGj 2030 Working hydraulic system pressure (Mpa): 16 Brake System Brake: Single pipe oil caliper disc brakes gas cap Parking brake: mechanical control with brake

9 955A Wheel Loader Features: 955A loader is our company in ZL50E-1 based on the development of an upgraded product, it draws on our traditional products ZL50E-1 and ZL50C all the benefits of the transmission system, the key technology used in all our military product technology, and continued product

10 features with large driving force. Cab stylish, new, within the overall dashboard, spacious and luxurious, standard heater. The loader features a significantly larger driving force, as standard rock bucket, positioned to the main rock conditions, also apply to construction, mining, infrastructure, road construction and other operations. Weichai produced by Steyr WD615. G220 engine, with a flame preheating device, the winter cold starting performance. Pre-filter using the new composite to reduce engine wear phenomenon early. The pre-filter and two filters do not require maintenance, air resistance is small, pre-filter effect over the desert air filter, mainly to solve the customers a poor environment, extend the maintenance cycle, the filter maintenance cycle extended 3 times. I made use of the military 420 pairs of guide wheel torque converter, the loop diameter of 420 mm, and moment coefficient of 3.70, with a loop diameter larger and moment coefficient, effective area width and so on. Transmission shaft set for the military technology of the hydraulic power shift transmission, transmission gear module, quality and stability, long service life. Using the new self-drive axle, advanced structure, carrying capacity, long life. Swing type rear axle as the center, tilt angle of ± 9, can effectively avoid the potholes in the road when the wheels suspended the work of the phenomenon of working hard off the ground when the rear wheels. Hydraulic system: Full hydraulic articulated steering, light and flexible. Machine's hydraulic system using the German DIN standard, "Cone -0" double seal, sealing, and anti-leakage strong. Hydraulic system configuration using common industry, increase the displacement of 160 working pump, steering systems and hydraulic system independent, high reliability, reducing the loss of hydraulic power and to raise the fuel economy. Pre-built independent of suction pressure of the hydraulic oil tank, back to the oil filter, can effectively ensure cleanliness, increase system reliability, reduce failure rate, long life cycle of oil. Exterior interior: Control system uses the integrated instrument panel, pleasing in appearance, visibility good. Can improve driver working conditions and ease fatigue. Implement hydraulic system uses a direct manipulation of control valve forms the rear of the loader for the company forms the unique characteristics, the effect is equivalent to half of pilot control, cost-effective. Reliable shock absorption technology industry to make driving more comfortable. Working device before and after are optimized frame design, weak links, local structural strengthening, more solid and durable. Lengthened frame, increasing weight, the whole machine more stable. Optimized design of working device, uninstall the height of 3330mm, the highest industry standard. Bucket 3.0m3 optional fluorine-free environment of ordinary air conditioning, central lubrication, luxury sound plus the long arm Parameters: Bucket Capacity (m3): 2.7 (rock bucket) Rated load (t): 5 Boom lifting time (s): 6.4 Three and time (s): 12.2 Maximum unloading height (mm): 3330 Uninstall from the (mm): 1010

11 Maximum traction (kn): 175 Maximum grade ability : 25 Minimum turning radius (mm): 5900 Minimum ground clearance (mm): 415 Overall Dimensions L W H (mm) (normal arm) (plus the long arm) Axle base (mm): 3000 Wheelbase (mm): 2310 Engine: Model: Steyr WD615G.220 Rated Power (kw): 162 Rated speed (r / min): 2200 Maximum torque (N.m): 843 Minimum fuel consumption rate (g / Kw.h): 198 Torque: Type: four rounds of a comprehensive type of work 420mm circular loop And moment coefficients: 3.7 Type: hydraulic gear set shaft Number of gears: four after the first four Maximum speed (km / h): 50 Front and rear axle: Main Drive Type: spiral bevel gear reducer level Wheel deceleration type: spur gear planetary gear Tires Specifications: (PR) Steering System: Type: full hydraulic steering Steering angle: 36 left and right Working hydraulic system: Working pump: CBGJ3160 Working hydraulic system pressure (Mpa): 16 Brake system: Brake: single pipe gas cap Caliper disc brake oil Parking brake: Double up shoe shaft operating within

12 956H Wheel Loader Features: 956H Wheel Loader is our company applying the latest technology and modern design tools developed by H series loaders products. It uses internal common transmission system, double pump confluence of technology and reinforced frame design, comfort control in the machine, man, machine security, and so do a more scientific adjustment, advanced and mature technology widely used in home and abroad, and its excellent performance, high life, high reliability, high efficiency, low fuel consumption and reasonable economic costs of keeping the world's advanced level. 1. Steyr WD615 G220 by Weichai engine, power reserve of large, low fuel consumption, good dynamic performance. With flame preheating function, power shutdown operation. Pre-filter using the new composite to reduce engine wear phenomenon early. The pre-filter and two filters do not require maintenance, air resistance is small, pre-filter effect over the desert air filter, mainly to solve the customers a poor environment, extend the maintenance cycle, the filter maintenance cycle extended 3 times. 2. Hang one with dual variable gear system, machine has advanced structure, reliable, reasonable match with the host, the use of maintenance and simple. 3. New self-drive axle, advanced structure, carrying capacity, long life. Hydraulic system: 1. Hydraulic system adopts the international advanced double pump confluence technology, energy loss, improve the overall fuel economy and operating efficiency. 2. Optional hydraulic

13 single lever pilot control, manipulation of light and flexible. Hydraulic control valve is located in front of the front frame, very easy maintenance. Morse standard shaft, an internal flexible shaft, the operating strength is significantly reduced. 3. Machine's hydraulic system pipes, using the German DIN standard "cone -0" double seal, sealing, and anti-leakage strong. 4. With coaxial hydraulic flow amplified, articulated steering systems, steering and flexible. 5. Use of side preload hydraulic tank, fuel tank capacity has increased, with oil and return oil filter, clean oil to ensure the system to prevent excessive wear of the pump to improve pump life. Appearance of the interior: 1. Cab-type steel frame, skinned with steel stamping process, the surface smooth, with a large circular piece before the glass, vision, overall coordination of interior design, elegant appearance. 2. Using the new instrument panel, pleasing in appearance, visibility good. 3. Cab and chassis with vibration damping connection, reducing vibration and bumps, and take full account of the cab noise, sealing, to reduce the noise, dust and damage caused by the driver. 4. Using up and down, front and rear adjustable damping high quality and reliable seats, in line with safety standards and ergonomics, increased comfort. 5. Comes standard with air conditioning, heater, stereo Structure: 1. Optimal design of reinforced front and rear frame, a more solid and durable. Rear frame with veneer "T"-shaped beam structure, reducing pressure and irregular type of weld, greatly improved reliability. 2. Articulated parts with double tapered roller bearings, not only increase the rigidity of articulated parts, and make it more reasonable force. 3. Up to Mega long wheelbase, which makes reaching a high of tipping load 12 tons, job stability, more breakout force. 4. Optimal design of single-arm, short rod, horizontal cylinder arrangement of working device, uninstall the height of high efficiency fast. Parameters: Bucket Capacity (m3): 3.0 Rated load (t): 5 Operating mass (kg): Three and time (s): 10.8 Maximum rise of force (kn): 175 Maximum grade ability : 25 Minimum turning radius (mm): 5890 Minimum ground clearance (mm): 410 Overall Dimensions: L W H (mm): (normal arm) (plus the long arm) (super-long arm) Axle base (mm): 3325 Wheelbase (mm): 2200 Engine: Type: WD615G220 Rated Power (kw): 162 Rated speed (r / min): 2200 Maximum torque (N.m): 843

14 Minimum fuel consumption rate (g / kw.h): 215 Torque converter Type: Twin Turbo And moment coefficients: 4.7 Transmission Type: Planetary type hydraulic gear Number of stalls: one after the first two Front and rear axle Active Communication type: spiral bevel gear reducer level Wheel deceleration type: spur gear planetary gear Tire Size: PR Steering System: Type: Coaxial hydraulic flow amplified steering articulated frame Steering angle: 37 left and right Working hydraulic system: Working pump: CBGj 3100 Working hydraulic system pressure (Mpa): 16 Brake system: Brake: Single pipe oil caliper disc brakes gas cap Parking brake: mechanical control with brake

15 936H Wheel Loader 92 kilowatts engine, power is more powerful. Dual variable system is split structure, maintenance more convenient. Three components of the single-stage single-phase torque converter, variable torque coefficient, and high efficiency. Fixed axle gearbox, reliable performance, easy maintenance. Drive axle reliable, load capacity, performance and stability. Hydraulic system: Machine's hydraulic system using the German DIN standard, "Cone-O" double seal, sealing, and anti-leakage strong. New multi-way valve, easy operation, less flow loss, system efficiency, the whole operation more efficient. Practical convenience of the valve system and steering system front work with independent control, system reliability, easy maintenance, low failure rate and easy to troubleshoot. Appearance of the interior: 50 Loader cab, spacious, air, car-style interior, luxury, comfort, colorless, laminated windshield, safety, fashion, sound and heat insulation, vibration isolation, noise reduction, filling the humane care. Heater system configured to create a good environment Structure: By strengthening the front frame structure, stronger, more durable; body longer, weight increase, the whole stability of the stronger, more breakout force. Single-arm, short rod, horizontal layout of the work of the boom cylinder installations, work more efficiently and faster.

16 Electrical system: Maintenance-free batteries, reliable performance. Use of integrated instrument panel, pleasing in appearance, visibility good. Imported waterproof sealed wire harness connectors, ensure the circuit reliability. Imports of high-end audio, sound beautiful. Optional working device performance parameters Parameters: Bucket Capacity (m3): 1.76 Rated load (t): 3 Total mass (t): Boom lifting time (s): 6.0 Three and time (s): 9.9 Maximum unloading height (high discharge) (mm): 3230 Uninstall from the (mm): 1168 Maximum breakout force (kn): 103 Maximum grade ability (o): 25 Minimum turning radius (mm): 4929 Minimum ground clearance (mm): 350 Overall Dimensions L W H (mm): Axle base (mm): 2607 Wheelbase (mm): 1800 Engine Rated Power (kw): 92 Rated speed (r / min): 2200 Maximum torque (N.m): 450 Minimum fuel consumption rate (g / Kw.h): 225 Torque converter Type: Single-stage single-phase And moment coefficient: 3.23 Transmission Type: hydraulic gear set shaft Number of stalls: the top four after the second Maximum speed (km / h): 35 Front and rear axle Active Communication type: spiral bevel gear reducer level Wheel deceleration type: spur gear planetary gear Tires: Specifications: PR

17 966H Wheel Loader Performance Introduction: 1. C6121ZG60e used on diesel engine, power reserve of large, low fuel consumption, good dynamic performance. With flame preheating function, power shutdown operation. 2. With double-varying systems of military technology has advanced structure, reliable, reasonable match with the host, the use of maintenance and simple. 3. Using an independent cooling system, the whole heat balance the system more reasonable and reliable. Hydraulic system and steering system: 1, the hydraulic system adopts the international advanced double pump confluence technology, energy loss, improve the overall fuel economy and operating efficiency. 2. Using hydraulic pilot control, manipulation of light and flexible. Hydraulic control valve is located in front of the front frame, very easy maintenance. 3. Machine's hydraulic system pipes, using the German DIN standard "cone-o" double seal, sealing, and anti-leakage strong. 4. With coaxial hydraulic flow amplified, articulated steering systems, steering and flexible. 5. Using hydraulic pre-pressure tank, pump the oil to improve the effectiveness and prevent air suction pump to improve pump life and ensure cleanliness, to bring more convenience service. Structure: 1. Optimal design of reinforced front and rear frame, a more solid and durable. Rear frame with veneer "T"-shaped beam structure, reducing pressure and irregular type of weld, greatly improved reliability. 2. Up to Mega long wheelbase, job stability, more breakout force.

18 3. Optimal design of single-arm, short rod, horizontal cylinder arrangement of the work of the device, uninstall the height of the high (3.6 meters), the efficiency of fast. Cab: 1. Cab-type steel frame, luxurious interior, beautiful appearance. 2. Using integrated instrument panel, pleasing in appearance, visibility good. 3. Cab and chassis with vibration damping connection, reducing vibration and bumps, and take full account of the cab noise, sealing, to reduce the noise, dust and damage caused by the driver. 4. Using up and down, front and rear adjustable damping seat SG3 reliable quality, meet safety standards and ergonomics, increased comfort. The main performance parameters Parameters: Bucket capacity :4.5m3 Rated load: 6t Operational quality: 20200kg Maximum breakout force: 175kN The maximum climbing degree: 25 Minimum turning radius :6170mm Minimum ground clearance: 410 mm Overall Dimensions: Length width height: mm Axle base: 3285mm Wheelbase: 2250mm Engine: Type: C6121ZG60e Rated power: 187kW Rated speed: 2200r/min Maximum torque: 982.7N.m Minimum fuel consumption: 213.3g/kW.h Torque converter: Type: three components of single-stage single-phase component Variable torque coefficient: 4.7 Type: fixed axis shift hydraulic Number of gear: forward fourth gear, back fourth gear Front and rear axle: Type of main drive: A level spiral bevel gear reducer Wheel reducer type: A level spur gear reducer Tires: PR Steering System: Type: coaxial flow of hydraulic amplification, articulated frame steering engine Steering angle: 36 left and right Working hydraulic system: Working pump: CBGj3125

19 Working hydraulic system pressure (MPa): 20 Brake System: (1) Working brake: single pipe oil caliper disc brakes gas cap (2)Parking brake: mechanical manipulation of the double-up shoe 958H Wheel Loader 1. Using of Cummins turbocharged diesel engine technology, compact structure, easy maintenance, excellent fuel economy, powerful, low noise, high reliability, and has a flame preheating, electric turn off the feature. 2. Using of ZF-one double-varying systems, high efficiency, low fuel consumption, reliable, long life and a reasonable match with the host. 3. new drive axle, reasonable structure, large carrying capacity, high reliability, long life. Hydraulic system: 1. the hydraulic system adopts the international advanced double pump confluence technology, energy loss, the whole performance and fuel efficiency is improved. 2. Configuring the internationally renowned brands Rexroth hydraulic pilot control. Small operating force, low labor intensity, the pressure loss is small, and easy maintenance. 3. The hydraulic system piping using the German DIN standard "cone-o " double seal, sealing, and anti-leakage strong. 4. The use of side preload hydraulic tank, large capacity fuel tank, oil and return oil filter, clean oil to ensure that the system and improve the service life of hydraulic original. Appearance of the interior:

20 Using vision, standard heater, air conditioning, stereo, sealed ergonomic anti-noise turned (ROPS), anti-litter (FOPS) cab and high damping seat, operating environment is comfortable, safe Structure: 1. Finite element optimization design of reinforced front and rear frame, a more solid and durable. After the T-beam frame structure with board and reduce the pressure type and irregular weld, increased reliability, maintenance, a large space. 2, meter long wheelbase, the whole tipping load of up to 12 tons, job stability, more breakout force. 3. Supporting many kinds of optional working device to meet user demand. Electrical System: 1, Configuration maintenance-free battery, safe, long life, and environmental protection, earthquake. 2, Sealed waterproof connectors and safe. 3, Using of combination switch, easy operation and reliable performance. 4. Configuring the negative master switch, it may cut off the power, the effective protection of the vehicle electrical system. Parameters: Rated load (t): 5 Bucket Capacity (m3) : Weight (t): 16.5 Unloading height (mm): 3160 Uninstall distance (mm): 1060 Three and time (s): 10.8 Engine power (kw / HP): 160 Minimum fuel consumption (g / kw/h): 202 Maximum breakout force (kn): 175 Steering angle: 37 º The maximum driving speed (km / h): 38.5 Tire lateral (mm): 6420 Bucket lateral transport position (mm): 6900 Dimension (length X width X high) (mm): 8136X3000X3557

21 Wheel Loader Model ZL-10,ZL-12,ZL-916,ZL-920,ZL-926 wheel loader and hydraulic wheel loader, which belong to series of engineering machinery, were designed and developed by our company and professional institutes and colleges, we referenced and absorbed structure characteristics and advanced technology from foreign and domestic machinery with the same type according to the demand of customers. This series of loader has rational design, compact structure, flexible operation and convenient maintenance. Each performance index is better than other machines with the same model. It is widely used in building works, municipal construction works, urban and rural gardens, road stations and docks, agricultural field and irrigation works. To be used at narrow loading places like industry and mine units such as varieties of coal pit, lime pit, sand field and cement plants and other departments, and is specially applicable to transport silt, crushed stone, lime, coal, slag, fertilized soil, garbage and other loose materials for short distance. It can be used associated with varieties of loading truck, tractor, agricultural used transport truck and building machinery(sand mixer, mixer). The main parts of this series use product with famous brand. It has reliable quality, and sufficient spare parts supply, and can be used generally. Main parameters: Model ZL-920 ZL-916 ZL-926 ZL-10 ZL-12 Model of diesel engine ChangchaiL24M Changchai1225 Rating power(kw) Rated feeding weight(kg) 1,800 1,600 2,000 1,000 1,200 Rated capacity of bucket(m3) Maximum discharging height(mm) 3,350 3,200 3,500 2,800 2,800 Unloading distance(mm) Weight of entire machine(kg) 4,300 4,800 5,220 2,300 2,500 Appearance size( L x W x H)(mm) 5,750 x 1,860 x 2,750 5,300 x 1,620 x 2,650 5,980 x1,900 x 2,780 5,000 x 1,510 x 2,460 5,510 x 1,510 x 2,460 Maximum turning radius(m) out of tyre4.45,out of bucket 4.85 out of tyre4.16,out of bucket 4.56 out of tyre4.70,out of bucket