Introduction of BLDC Motors Introduction of BLDC Geard Motors Termination Specification...12
|
|
- Elijah Taylor
- 5 years ago
- Views:
Transcription
1
2 目次 BLDC Geard
3 Features Wide speed range, flat torque Excellent speed stability Compact and high power High efficiency and energy-saving Low temperature rise, low noise, low vibration Long life and low maintenance cost Low cogging torque Applications Mechanical automation (Textile industry) Banking automation (ATM) Office automation (Printers) Solar energy equipment Pump and value (Metering pump) Speed drive and control device for various industries Automotive Conveyor Food industry Sorting system Model Numbering System 42 BL 3 L Voltage L1 12VDC L2 24VDC L3 36VDC L4 48VDC H2 22VAC H3 38VAC Rated Power 3W Name BL: BLDC motor Shaft default: flat Flange Size metric: mm Terminal default: No connector 1
4 BLDC Motor Technical Type Units 42BL3L2 42BL3L4 42BL6L2 42BL6L4 42BL9L2 42BL9L4 Long mm Input power VDC Rated power W Phase number 3 Rated speed RPM Max. speed RPM Rated torque Nm Max. torque Nm Rated current A Max. current A Voltage constant Vrms/Krpm Torque constant Nm/Arms Moment of inertia 1^-4kgm^ Resistance Ω Inductance mh Sensor Hall Ins.class E Protective rating IP4 Operating temperature ~ + 5 Storage temperature -25~+7 Operating RH 85% RH or below (noncondensing)) Operating environment Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust Altitude 1m or below Mechanical Dimension Series L mm 2 ± L ± ±.1 CW 42BL BL ± ± ±.1 22 h BL ±2 3 Unit: mm 2
5 Torque - Speed Features 42BL3L2-C 42BL3L4-B (Nm).72 (Nm) (RPM) (RPM) 42BL6L2-B 42BL6L4-B (Nm) (RPM) (RPM) 42BL9L2-B 42BL9L4-B (Nm) (Nm) (RPM) (RPM) 3
6 BLDC Motor Technical Type Units 57BL6L2 57BL6L4 57BL12L2 57BL12L4 57BL18L2 57BL18L4 Long mm Input power VDC Rated power W Phase number 3 Rated speed RPM Max. speed RPM Rated torque mnm Max. torque mnm Rated current Arms Max. current Arms Voltage constant Vrms/Krpm Torque constant Nm/Arms Moment of inertia 1^-4kgm^ Resistance Ω Inductance mh Sensor Hall Ins.class E Protective rating IP4 Operating temperature ~ + 5 Storage temperature -25~+7 Operating RH 85% RH or below (noncondensing)) Operating environment Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust Altitude 1m or below Mechanical Dimension L Series mm 57BL ±.1 21 ±1 2.5 ±.1 15 ±.1 8 L ± ± ±.1 CW 57BL ± ±.1 57BL ± ±.25 Unit: mm 4
7 Torque - Speed Features 57BL6L2-B 57BL6L4-A (Nm).145 (Nm) (RPM) (RPM) 57BL12L2-B 57BL12L4-A (Nm) (RPM) (RPM) 57BL18L2-B 57BL18L4-C (Nm).43 (Nm) (RPM) (RPM) 5
8 BLDC Motor Technical Type Units 8BL1L2 8BL1L4 8BL2L2 8BL2L4 8BL3L4 Long mm Input power VDC Rated power W Phase number 3 Rated speed RPM Max. speed RPM Rated torque Nm Max. torque Nm Rated current A Max. current A Voltage constant Vrms/Krpm Torque constant Nm/Arms Moment of inertia 1^-4kgm^ Resistance Ω Inductance mh Sensor Hall Ins.class E Protective rating IP4 Operating temperature ~ + 5 Storage temperature -25~+7 Operating RH 85% RH or below (noncondensing)) Operating environment Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust Altitude 1m or below Mechanical Dimension Series L mm 3 ±1 L ± ± ±.1 CW 8BL1 5 8BL ± ±.1 8BL ± Unit: mm 6
9 Torque - Speed Features 8BL1L2 8BL1L (Nm).24 (Nm) (RPM) (RPM) 8BL2L2 8BL2L4 (Nm) (Nm) (RPM) (RPM) 8BL2L (Nm) (RPM) 7
10 Features Smooth running and stable output torque High efficiency and energy-saving Output speed can be adjusted in wide range through the control of the drive unit The overload protection can be achieved through the control of the drive unit Compact and high allowable torque Low temperature rise, low noise, low vibration Fast boot, quick response Applications Conveyor Pump and value (Metering pump) Cutter system Sorting system Automotive Mechanical automation Solar energy equipment Mixing system Food industry Speed control system Model Numbering System MGB 42 A Gearedbox Flange Size Gearedbox Ratio Series Code 8
11 MOTOR TYPE: BLDC General s Type Motor model Units -5A -1A -15A -2A 42BL3L2-3A -5A -1A _ Max. input speed rpm 35 Rated input speed rpm 3 Rated input power W 18 *1 Ratio _ *2 Output shaft rotate direction ( face to output shaft) CCW CW CW CCW CCW CCW CW _ *3 Rated Voltage DC 24V Output speed rpm Permission load Nm Permission thrust load N 3 Permission overhung load *4 N 5 Permission inertia 1-4Kgm *5 Life Lh 5 *6 Noise with no load db < 6 Saftey IP4 Operation Temperature -1 ~ +4 Operation Humidity 15% ~ 9% *1 New ratio can be developed according to customer s requirements *2 depend on output shaft of motor rotate direction is cw (face to output shaft) *3 48VDC is optional *4 from end of output shaft 1mm *5 continue running, load coefficient 1., 25 *6 Test Distance : 1M Mechanical Dimension 2 ± L1 L L2 42 MAX 31 ±.1 Ratio 2 > ±.5 8 L1 32mm 42mm ± ±.1 31 L2 46mm 4-M3, Hole Load Draft Unit: mm Acceleration Area Working Area Torque (Nm) Acceleration Area Working Area 3 Rated Torque 5% Rated Torque 35 Speed (RPM) 9
12 MOTOR TYPE: BLDC General s Type Motor model Units -5A -1A -15A -2A 57BL6L2-3A -5A -1A -2A Max. input speed rpm 35 Rated input speed rpm 3 Rated input power W 3 *1 Ratio *2 Output shaft rotate direction ( face to output shaft) CCW CW CW CCW CCW CCW CW CW *3 Rated Voltage DC 24V Output speed rpm Permission load Nm Permission thrust load N 4 Permission overhung load *4 N *5 N Permission inertia 1-4Kgm *6 Life Lh 1 *7 Noise with no load db < 6 Saftey IP4 Operation Temperature -1 ~ +4 Operation Humidity 15% ~ 9% *1 New ratio can be developed according to customer s requirements *2 depend on output shaft of motor rotate direction is cw (face to output shaft) *3 48VDC is optional Mechanical Dimension *4 from end of output shaft 1mm *5 from end of output shaft 2mm *6 continue running, load coefficient 1., 25 *7 Test Distance : 1M Ratio 2 >2 3 ± ±.1 3 L1 L L2 6 MAX L1 32mm 42mm M4 L2 54mm ± ±.2 1 Load Draft Acceleration Area Working Area Unit: mm Torque (Nm) Acceleration Area Working Area 3 Rated Torque 5% Rated Torque 35 Speed (RPM) 1
13 MOTOR TYPE: BLDC General s Type Motor model Units -5A -1A -15A -2A 8BL1L4-3A -5A 1A -2A Max. input speed rpm 35 Rated input speed rpm 3 Rated input power W 5 *1 Ratio *2 Output shaft rotatedirection ( face to output shaft) CCW CW CW CCW CCW CCW CW CW *3 Rated Voltage DC 24V Output speed rpm Permission load Nm Permission thrust load N 1 Permission overhung load *4 N *5 N Permission inertia 1-4Kgm *6 Life Lh 1 *7 Noise with no load db < 6 Saftey IP4 Operation Temperature -1 ~ +4 Operation Humidity 15% ~ 9% *1 New ratio can be developed according to customer s requirements *2 depend on output shaft of motor rotate direction is cw (face to output shaft) *3 48VDC is optional Mechanical Dimension *4 from end of output shaft 1mm *5 from end of output shaft 2mm *6 continue running, load coefficient 1., 25 *7 Test Distance : 1M 35 ±.2 L Ratio 2 > L1 L2 8 ±.2 L1 32mm 43.5mm 3 L2 51mm ± M5, Hole Load Draft 4 94±.1 Acceleration Area Working Area Unit: mm Torque (Nm) Acceleration Area Working Area 3 Rated Torque 5% Rated Torque 35 Speed (RPM) 11
14 Motor connection MOLEX Housing: MOLEX Terminal: Blue Orange Yellow Terminal Function W U V Color Blue Orange Yellow Encoder connection MOLEX Housing: Blue Black Orange MOLEX Terminal: Red Yellow Terminal Color Function 1 Red VCC(+5V) 3 Yellow Hv 4 Blue Hw 5 Black GND 6 Orange Hu Attention: All specifications in catalog are for customer s reference. We recommend customer confirm specifications with our salesman before placing orders. We are not responsible for any consequence due to change in specifications. 12
15
Introduction of BLDC Motors BLDC Motors BLDC Motors BLDC Motors BLDC Motors BLDC Motors...
BDC MOTORS 7 8 Catalog...1 42...2 57...4 65...6 7...7 8...8 R3 85...1...11...12...13 R3...14...15...17...19...21 Characteristics Wide range of speed control and smooth torque output Excellent speed stability
More informationBLD. Brushless DC Motor&Drive. Wide speed range, flat torque Excellent speed stability Compact and high power
BLD Brushless DC Motor&Drive Wide speed range, flat torque Excellent speed stability Compact and high power Low power consumption low noise low vibration Long life and low maintenance Low cogging torque
More informationSMH60S AAK-3LKH SMH60S AAK-3LKN SMH60S ABK-3LKH
FEATURES 60mm Frame Size 220VAC Power Rating up to 400 Watts Rated Torque up to 1.27 Nm Rated Speed of 3000 RPM Brake Option Available 2500PPR Incremental Encoder Totally Enclosed, Non-Ventilated IP65
More informationSMH80S AAK-3AKH SMH80S ABK-3AKH
FEATURES DESCRIPTION 120 VAC 80mm Frame Size Power Ratings from 750-1000 Watts Rated Torque of 338-450 oz-in Maximum Speed of 5000 RPM Brake Option Available 2500 PPR Incremental Encoder IP65 Protection
More informationSMH60S-0040 Servo Motor
FEATURES 120-220 VAC 400 W Power Rating Rated Torque of 1.27 Nm Maximum Speed of 6200 RPM 2500 PPR Incremental Encoder IP65 for Body, IP54 Shaft Seal 60mm Frame Size CE Certified DESCRIPTION The SMH60S
More informationKNC-SRV-SMH60S-0020 Servo Motor
KNC-SRV-SMH60S-0020 Servo Motor FEATURES 120-220 VAC 200 W Power Rating Rated Torque of 90 oz-in Maximum Speed of 6200 RPM 2500 PPR Incremental Encoder IP65 for Body, IP54 Shaft Seal 60mm Frame Size CE
More informationKNC-SRV-SMH80S Servo Motor
KNC-SRV-SMH80S Servo Motor FEATURES DESCRIPTION 120 VAC 80mm Frame Size Power Ratings from 750-1000 Watts Rated Torque of 338-450 oz-in Maximum Speed of 5000 RPM Brake Option Available 2500 PPR Incremental
More informationSMH80S AAK-3LKH SMH80S ABK-3LKH SMH80S AAK-3LKN
FEATURES DESCRIPTION CUSTOM ORDER LAYOUT 80mm Frame Size Power Rating up to 1000 Watts Rated Torque up to 3.18 Nm Rated Speed of 3000 RPM Brake Option Available 2500PPR Incremental Encoder Totally Enclosed,
More informationKNC-SRV-SMH60S AAK-3LKH KNC-SRV-SMH60S AAK-3LKN KNC-SRV-SMH60S ABK-3LKH
KNC-SRV-SMH60S Servo Motor FEATURES DESCRIPTION SPECIFICATIONS 60mm Frame Size 220VAC Power Rating up to 400 Watts Rated Torque up to 180 oz-in Rated Speed of 3000 RPM Brake Option Available 2500PPR Incremental
More informationSKA DDR SKA DDR SKA DDR SKA DDR SKA DDR SKA DDR SKA DDR
148 RATINGS AND SPECIFICATIONS TIME RATING Continuous AMBIENT TEMPERATURE 0 to 40 C INSULATION CLASS F AMBIENT HUMIDITY 20 to 80% RH (non condensing) POLES 14 THERMAL PROTECTION PT 1000 INSULATION SYSTEM
More informationSKA DDR SKA DDR SKA DDR SKA DDR SKA DDR SKA DDR
430 RATINGS AND SPECIFICATIONS POLES 56 THERMAL PROTECTION PT 1000 430.30.210.52 430.30.210.53 430.30.210.54 430.30.210.55 430.30.210.56 Stall torque Nm 210 210 210 210 210 Peak torque Nm 458 458 458 436
More informationFEATURES DESCRIPTION SPECIFICATIONS
KNC-SRV-SME60S Servo Motor FEATURES 60mm Frame Size 70 VDC or 220 VAC Power Rating up to 200 Watts Rated Torque up to 91 oz-in Rated Speed of 3000 RPM 2500PPR Incremental Encoder Included Totally Enclosed,
More informationSMS60S JAK - 3LKU
KNC-SRV-SMS60S-0040 Servo Motor FEATURES DESCRIPTION 220 VAC 400 Watt Power Rating Rated Torque of 179 oz-in Maximum Speed of 6000 RPM Single Coil 20-Bit Communication Encoder or Multi-Turn 16-Bit Communication
More informationSMS80S JAK - 3LKU
KNC-SRV-SMS80S-0075 Servo Motor FEATURES DESCRIPTION 220 VAC 750 Watt Power Rating Rated Torque of 338 oz-in Maximum Speed of 5000 RPM Single Coil 20-Bit Communication Encoder or Multi-Turn 16-Bit Communication
More informationNote: All windings shown are standard configuration. Please contact Motion Technologies for availability of all others
Table of content Theory 3 1) Brushless Motor MTFL22RBL Series 4 MTFL28BL Series 5 MTFL33BL Series 6 MTFL36RBL Series 7 MTFL42RBL Series 8 MTFL42BL Series 9 MTFL42BLSH Series 10 MTFL57BL Series 11 MTFL57BLSH
More informationSERIES PR90H PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS REFERENCE PR90H - C C - C. External diameter 58 mm
PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Programmable incremental optical encoder from 1 to 65.536 pulses per rotation Programmable via USB, without an additional programming
More information56 mm sq. (2.20 inch sq.)
56 mm sq. (2.2 inch sq.) 1.8 /step RoHS Bipolar winding, Lead wire type Unipolar winding, Lead wire type p. 68 Customizing Hollow Shaft modification Decelerator Encoder Varies depending on the model number
More information40W 80mm AC voltage input
BRUSHLESS DC MOTOR UNIT - B Series 40W mm AC voltage input DIMENSIONS K8BS40N (Weight : 0.8Kg) 4-Ø6.5HOLE 32 2 8 42 25 Ø94±0.5 11 Ø73 0 0 (h7) Ø10.015 0 (h7) 9 MOTOR CABLE Ø8.5 500mm A HOUSING: 5557-10R(MOLEX)
More informationSERIE 59S. Rear clamp. Frontal clamp INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS SIN/COS
INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 2.048 pulses per turn Shaft fixing through front or rear clamp External diameter 58 mm Hollow shaft Ø 10, 12 or 14 mm Protection
More informationIntroduction. Remark:
M O T O R S B R U S H L E S S D C Introduction NMB Minebea is a world leader in the design and manufacture of precision brushless DC motors and stepping motors. The company offers a broad range of standard
More informationR&D Lab: BRUSHLESS MOTOR BRUSHLESS MOTOR. Line card common characteristics: High Speed-Torque BLDC Industrial Motors
BRUSHLESS MOTOR Line card common characteristics: High Speed-Torque BLDC Industrial Motors 03/07/2012 Rev. 0.25 www.rd-lab.it 1 Flange size 28 round body, high speed precision BLDC minimotors NEMA 11 Winding
More informationRH Series. Features. Structure. High resolution High resolution of maximum 400,000 pulses/revolution ( /pulse) combining a HarmonicDrive.
RH Series The RH series includes compact and high-torque DC servo actuators with a high rotational accuracy combining a speed reducer HarmonicDrive for precision control and a DC servo motor. A combination
More informationMOONS SM servo motors offer a great combination of Power, Precision and Value:
MOONS SM Series of servo motors has been expanded and improved. The SM Series now includes a variety of standard windings, more feedback options, and more connection options. Some ratings have increased,
More information5-Phase Stepper Motor
Ordering Information Application model: Standard shaft type, Hollow shaft type, Shaft type+ A 8K M 5 6 6 B Motor type Motor phase Rated current Max. Holding torque Shaft type Motor length : provides single
More informationQMOT Motor QBL4208 Manual 42mm QMOT BLDC motor family
QMOT Motor QBL4208 Manual 42mm QMOT BLDC motor family Trinamic Motion Control GmbH & Co. KG Sternstraße 67 D 20357 Hamburg, Germany http://www.trinamic.com QBL4208 Manual (V1.01 / 2008-04-01) 2 Table of
More informationST SERIES SERVO MOTOR
ST SERIES SERVO MOTOR BEIJING KND CNC TECHNIQUE CO.,LTD. 01.2012 CONTENTS NOTE 1 PROHIBITED 1 SOCKET FIG. 1 CAUTION 1 GENERAL 2 CHARACTERISTICS 2 SUPERIORITY 2 MODEL DESCRIPTION 3 WIRING 4 1. Power connector
More informationK Series Kit Motor Reliable and Compact Approach: Build your own high-performance motor
Frameless K Series Kit Overview K Series Kit Motor Reliable and Compact Approach: Build your own high-performance motor Direct drive motion construction gives equipment designers the advantages of lower
More informationFlat Hollow Shaft AC Servo Motor HMA Series
Flat Hollow Shaft AC Servo Motor HMA Series New high-performance hollow-shaft servo motors are available in five sizes. Flat design features a large through-hole to allow cables, shafts or lasers to pass
More information2: A, B 3: A, B, Z 4: A, A _, B, B _ 6: A, A _, B, B _, Z, Z _
Diameter mm Shaft Type/Hollow Type/Built-In Type Incremental Rotary Encoder Features Diameter mm flange type Suitable for measuring angle, position, revolution, speed, acceleration and distance Power supply:
More informationLSM60 Series. Brushless Servo Motors. Product Description
LSM60 Series Brushless Servo Motors Product Description The LSM60 series servo motors offer high performance with wide output range from 00W to.5 kw*. This series motors are designed to operate over a
More informationHG-KN and HG-SN Series Specifications
HG-KN and HG-SN Series Specifications HG-KN Series (Low Inertia, Small Capacity) Specifications Servomotor Model HG-KN 13(B)J 23(B)J 43(B)J 73(B)J Stocked Item S S S S Compatible Servo Amplifier Model
More informationIntroduction. The high quality of our products is achieved by a continuous and permanent quality control.
MOTORS B R U S H L E S S D C Introduction NMB Minebea is a world leader in the design and manufacture of precision brushless DC motors and stepping motors. The company offers a broad range of standard
More informationBM Series. DC Brushless Rotary Servomotors. Standard NEMA frame sizes. Neodymium iron boron rare-earth magnets maximize performance
BM Series Rotary Motors BM Series DC Brushless Rotary Servomotors Standard NEMA frame sizes Neodymium iron boron rare-earth magnets maximize performance Skewed stator with 8-pole design minimizes torque
More informationPermanent Magnet Synchronous Frameless Torque Motors KSO/H Series
Permanent Magnet Synchronous Frameless Torque Motors KSO/H Series Icpe 313 Splaiul Unirii 030138, Bucureşti, România tel./ fax +40213467233 email servo@icpe.ro web http://www.icpe.ro/ Model Number KSO/H
More informationBrushless Motors. BMU Series. Connector Type NEW. Easy speed control, easier to use. New connector type with smart wiring.
Brushless Motors BMU Series NEW Connector Type Easy speed control, easier to use. New connector type with smart wiring. The new connector type in the compact, high-efficiency BMU series, directly connects
More informationBrushless Servo Motors
Quantum QB56 Series Housed Brushless Servo Motors NEMA Size 56 High Power Density, Sinusoidal BEMF Allied Motion s Quantum (QB) housed brushless servo motors are designed for use in precision servo applications
More informationConstant Speed Motors
Standard AC Introduction Induction Induction Standard AC Constant Speed Reversible Brake Reversible Brake High-Strength, Long Life, Low Noise Clutch and Brake Synchronous Synchronous Clutch & Synchronous
More informationD M M. AC Servo Motor DHT Series. Specification Manual Revision 1.4a 01/14. Dynamic Motor Motion Technology Corporation
D M M Dynamic Motor Motion Technology Corporation AC Servo Motor DHT Series Specification Manual Revision 1.4a 01/14 All specified data subject to change without notice to reflect updates and improvements
More information0400: 400W 0750: 750W 1000: 1000W 1500: 1500W. 1: 2500-line (10,000 ppr) incremental encoder 2: 17-bit (131,072 ppr) absolute encoder
Servo Motors Frame Size mm mm mm mm (NEM) (NEM) (NEM) (NEM) Rated Power 7. K. K. K. Part Number EL M 7 Series Product Power EL: D: Servo Drive M: Servo Motor : 7: 7 : : Encoder Type Communication or Motor
More informationK Series Kit Motors. Frameless Kit Motors are the Reliable and Compact Approach to Build Your Own High-Performance Motor. Contact Information:
K Series Kit Motors Frameless Kit Motors are the Reliable and Compact Approach to Build Your Own High-Performance Motor Direct drive motion construction gives equipment designers the advantages of lower
More informationBRUSHLESS DC MOTOR UNIT - L Series
BRUSHLESS DC MOTOR UNIT - L Series DIMENSIONS KLHN2 + KH BTH (Weight : 1.2Kg) 47.7 3 B B Ø.03 0 (H) MOTOR CABLE Ø 500mm A HOUSING: 22-(AMP) 4 KEY KEY GROOVE (ACCESSORY) 25±0.2 4 +0.03 4 +0.03 4 +0.03 2.5
More informationVARIODRIVE 3-phase external rotor motor. VARIODRIVE technical information VARIODRIVE
27.05.20 0: Seite Information Antriebstechnik_20_05_27_Finale_EN_:Vorlage VarioDrive C ECI motor 5 AC motors VARIODRIVE -phase external rotor motor Specifications 4 Representatives VARIODRIVE technical
More informationin High Dynamic and position control for automation
Phase motion Control T ServoMotors LEADING THE INNOVATION in High Dynamic and position control for automation INTRODUCTION The T series of high performance servo motors, produced in the new Phase Motion
More informationPower in new dimensions
NEW FAULHABER BXT Power in new dimensions WE CREATE MOTION EN Angaben zu Lebensdauer sowie weitere technische Erläuterungen 1 FAULHABER BXT Today, you don't find visionary designs in Hollywood, but rather
More informationCompletely free from the Concern of Loss of Position (Alarm Feneration when Step-Out) Perfect Positiooning and Completion (Positioning Completion
Completely free from the Concern of Loss of Position (Alarm Feneration when Step-Out) Perfect Positiooning and Completion (Positioning Completion Signal Generation) Don t Care what the Phase of Motor is
More informationBLDC Motor Product Manual. High Torque Density DC Brushless Motor ISSUE:A
BDC Motor Product Manual High Torque Density DC Brushless Motor ISSUE:A Kinavo Servo Motor (Changzhou) imited NO.7 Kunlun Road Sanjin Industrial Park, Changzhou, Jiangsu province, China Tel: +86 519 81580573
More informationDLA SERIES + ACCESSORIES
LINEAR ACTUATORS SERIES + ACCESSORIES 50 mm to 300 mm stroke 10 N series 50-300 mm 0-10 N 95 Ø40 9 Extracted - - Example: --5-A-50- Reduction 5 10 30 40 Voltage (VDC) / / / / / Max. thrust (N) 0 300 500
More informationWatertight, Dust-Resistant. Motors. Standard AC Motors A-207. Standard AC Motors Intro duction. Motors. AC Speed Control Motors Inverter.
Standard AC Standard AC Intro duction Induction Reversible Electromagnetic Brake Right-Angle Gearheads SB5W US ES2 FE1/FE2 AC Speed Control Inverter Torque Accessories Installation A-27 Standard AC RoHS-Compliant
More informationDirect-Drive Brushless Servo Systems
Catalog 8-4/US Direct-Drive rushless Servo Systems The Dynaserv is a high-performance, direct-drive servo system with optical encoder feedback. Each DM Model consists of a brushless direct drive motor,
More informationPAS Series AC Servo Motor. Datasheet
PAS Series AC Servo Motor Datasheet Version PAS 2013 01 http://www.primopal.com Description PrimoPal offers a wide selection of high performance brushless AC servo motors, with power ratings from 200 W
More informationAS40 AC Servo Motors
AS40 AC Servo Motors Electrical Specifications: AS40-30-002E25 AS40-30-003E25 Rated Power (W) 50 50 100 100 Rated Voltage (V) 48 220 48 220 Rated Current (A) 1.1 0.4 2.5 0.9 Rated Speed (RPM) 3000 3000
More informationELECTRIC CYLINDER SERIES ELEKTRO ISO 15552
ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552 ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552 1 2 SUMMARY P ELECTRIC CYLINDER SERIES ELEKTRO ISO 15552 PAGE 4 P ELECTRIC MOTORS PAGE 15 P DRIVES FOR STEPPING MOTORS
More informationELECTRO-MECHANICAL MINIATURE SEALED. Long life Solder or PC terminals PanelsealedtoIP67
PUSHBUTTON SWITCHES ELECTRO-MECHANICAL MINIATURE SEALED SERIES 48EM: ACTUAL SIZE FLEX-TECH MINIATURE SEALED PUSHBUTTON SWITCHES This rugged multi-option sealed pushbutton series offers the utmost in choices
More informationBrushless DC Motor Systems FBL2 Series
FBL2 Series The FBL2 Series consists of a high performance, compact, brushless DC motor and driver. This product is available with 75 W (1/1 HP) and 12 W (1/6 HP) output power. For easy installation, the
More information1LG0 Low-voltage Motors
Low-voltage motors up to 315kW Catalog D81.5.1 1LG Low-voltage Motors Answers for industry. 1 Table of Contents Overview 3 Motor standards 5 Mechanical design 6 Electrical design 1 Converter fed application
More information56 mm sq inch sq.
Stepping Motors 56 mm sq. 2.2 inch sq. 1.8 /step Unipolar winding Lead wire type Bipolar winding Lead wire type P.4 Unipolar winding Lead wire type Model number Holding torque at Rated current Wiring Winding
More informationDC BRUSHLESS MOTOR DRIVER CONTROL TYPE
DRIVER CONTROL TYPE BLDC MOTOR TYPICAL PERFORMANCE MODEL voltage (V) output ( W) (A) Speed (RPM) (kgf-cm) Rating (Kg) Flange Housing FBD60-N012005 12 5 0.7 1500/3000 0.33/0.16 cont 0.5 60 60 x 53 FBD60-N012015
More informationPKS-FD Servo System
PKS-FD123-01 Servo System FEATURES 24-70VDC of 0.32 Nm Power Ratings up to 100 Watts 2,500 PPR Incremental Encoder Maximum Speed of 6500 RPM IP65 for Body, IP54 Shaft Seal Brake Option Available Position,
More informationBrake Pack SB50W. Standard AC Motors A-143. Standard AC Motors Intro duction. Brake Pack. AC Speed Control Motors Inverter.
Standard AC SB5W Standard AC Intro duction Induction Reversible Right -Angle Gearheads SB5W AC Speed Control Inverter SB5W US ES2 FE1/FE2 Watertight, Dust-Resistant Torque Accessories Installation A-143
More informationNEV ABLE REDUCER CORONET REDUCER FOR SERVO MOTOR
NEV 83 Right Angle Shaft Model & Type Symbol 85 Performance Table Right Angle Shaft Reduction ratio 1/3 1/5 1/9 1/15 1/27 1/45 1/75 1/105 Type Output shaft speed Rated Max. instantaneous output torque
More informationConstant Speed Motors
Standard AC Standard AC Constant Speed Brake High-Strength, Long Life, Low Noise V Series Constant Speed Torque Brake V Series TM Series Torque Features and Types of Constant Speed C-10 How to Read Specifi
More informationRoHS-Compliant. Watertight, Dust-Resistant Motors FPW Series
RoHS-Compliant Watertight, Dust-Resistant s FPW Series 1 RoHS-Compliant Watertight, Dust-Resistant s FPW Series Induction Type The FPW Series are geared motors which conform to the IEC standard IP67 (Recognized
More informationCourtesy of Steven Engineering, Inc - (800) PATENTED
PRECISION RING DRIVE SYSTEMS Based on Nexen s innovative Roller Pinion technology, Nexen Ring Drive Systems come complete with a precision grade, high capacity bearing and drive mechanism in a rigid housing.
More informationADR-A 系列 ADR -A Series 直接驱动 Direct 旋转电 Drive Rotar y Motor
ADR-A Series ADR-A 系列 Direct Drive Rotary Motor 直接驱动旋转电动机 Direct drive, brushless motor fully integrated with encoder and bearing Low cogging torque Low speed and high speed windings Precise homing through
More informationStepper Motors ver ver.5
A Stepper s Stepper s A-1 Overview... A-2 Overview and... A-15 & Stepper and RK Series A-16 RK... A-47... A-51 Stepper Series A-52 Stepper Series A-8 See Full Product Details Online www.orientalmotor.com
More informationHow to Read Gearhead Specifications Gearheads are shown for both AC standard motors and Speed Control Systems. Gearmotor Torque Table (Example)
How to Read Gearhead Specifications Gearheads are shown for both AC standard motors and Speed Control Systems. Gearmotor Table (Example) Single-Phase115/230 VAC, 60 Hz Speed r/min 600 5R90GU-AWU 5R90GU-AWTU
More informationBrushless internal rotor motors ECI series. Drive solutions Industrial drive engineering
Brushless internal rotor motors ECI series Drive solutions Industrial drive engineering Modular drive systems. Motors with integrated logic and power electronics optional gearhead, encoder and brake. Contents.
More informationReversible Motors. Standard AC Motors. Constant Speed Motors. Standard AC Motors C-75. Reversible Motors
Standard AC Introduction Induction Standard AC Constant Reversible Reversible Reversible Electromagnetic Brake Clutch & Synchronous Brake Low- Synchronous Watertight, Dust-Resistant Torque Gearheads Linear
More informationNX Series. Tuning-Free AC Servo Motor Unit
Tuning-Free AC Servo Motor Unit NX Series An AC servo motor unit that is capable of high accuracy control with easy operation. Smooth operation can be achieved in high inertia loads or belt drive applications
More informationHigh-Efficiency AR Series. RK Series /0.72 /Geared. CRK Series. RBK Series. CMK Series. 2-Phase Stepping Motors A-278.
A Stepping Motors Stepping Motors Introduction A-2 Introduction AC Power Supply Input Stepping Motor and Driver Packages A-17 DC Power Supply Input Stepping Motor and Driver Packages Stepping Motors (Motor
More informationM, N and A Series Brushless Servo Motors
www.applied-motion.com M, N and A Series Brushless Servo Motors Applied Motion s M Series, N Series, and A Series brushless servo motors provide extremely high performance in one of the industry s most
More informationSTANDARD VERSION OF HIGH VOLTAGE MOTORS
AUSTRIA STANDARD VERSION OF HIGH VOLTAGE MOTORS The following pages contains the three phase squirrel cage high voltage induction motors in three different versions. a) Open drip-proof IP23 motors SCf
More informationTransmotec PLANETARY GEAR DC MOTORS PLANETARY GEAR MOTORS. Transmotec. 43 mm to Ø123 mm 12 W to 421 W.
Transmotec PLANETARY GEAR MTRS PLANETARY GEAR DC MTRS mm to Ø123 mm 12 W to 421 W Transmotec www.transmotec.com Phone: +46 8 792 35 30 Fax: +46 8 792 35 20 e-mail: inquiry@transmotec.com Page 1 Rev. 2018
More information42 mm sq inch sq.
tepping Motors 42 mm sq. 1.65 inch sq. 1.8 /step lim form winding Lead wire type winding Lead wire type Model number Holding torque at Rated current Wiring Winding Mass Rotor inertia 2-phase energization
More informationAC Servo Motors and Servo Rated Gearheads
AC Servo Motors and Servo Rated Gearheads for the automation industry Brushless Servo Motors 2 AC Servo Motors Baldor has been leading the way in energy efficient industrial motors since the 192 s. Baldor
More informationMotor/Drive Configuration
ZX900 Electrical Specifications Input Power Output Power Electrical specifications for the ZX900 series drive's input and output power are provided in this section. Voltage (Nominal) Voltage (Range) Frequency
More informationDatasheet. Pitch Motor PMSM SP190F8
Pitch Motor PMSM SP190F8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260009c 1 Application The Pitch motor
More informationDatasheet. Pitch Motor PMSM SP190C8
Pitch Motor PMSM SP190C8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260007a 1 Application The Pitch motor
More informationAC servo systems P Series
AC servo systems P Series Servomotors Capacity 30 to 750(6 types) Features Low inertia /high power rate Best suited for high-response applications with light-load low machine inertia levels Faster servos
More informationThe headquarter ELMEQ A/S is located in Denmark, offering innovation, development and logistics all based on 20 years knowhow and experience.
The headquarter ELMEQ A/S is located in Denmark, offering innovation, development and logistics all based on 20 years knowhow and experience. ELMEQ GmbH was founded in Germany 2011 and is working closely
More informationMOTOR MODEL F-4030 F-4050 F-4075 F-6100 F-6200 F-6300 MECHANICAL DATA (1) Rated Torque, Cont (Stall)
F-SERIES MOTOR DATA MOTOR MODEL F-4030 F-4050 F-4075 F-6100 F-6200 F-6300 MECHANICAL DATA (1) Rated Torque, Cont (Stall) Nm 3.5 6.9 9.3 13.0 19.8 27.8 lb-in 31 61 82 115 175 245 Peak Torque (Stall) Nm
More informationSKA DDR
SKA DDR SKAddr HOW TO ORDER AN SKA DDR TORQUE SKAddr 090 30 2 17 01 01 001 01 00 00 RATED TYPE TYPE WINDING SHAT HALL TRANSDUCER OUTPUT TORQUE CODE TYPE SENSOR TYPE CONNECTION MODEL LIST [Nm] SKAddr =
More informationDesigned by MotorPro TM software
Designed by MotorPro TM software KOMOTEK CO., LTD. Hyundai-i Vally 5F, Sangdaewon1-dong 223-12 Jungwon-gu, Sungnam City, Kyunggi-do, Korea TEL +82-31-737-9000 FAX +82-31-737-9070 E-MAIL komotek-sales@komotek.com
More informationCommon Specifications
Common Specifications Permissible Overhung Load and Permissible Thrust Load AR Series Unit = N (lb.) Motor Frame Size Model Gear Ratio Permissible Overhung Load Distance from Shaft End mm [in.] Permissible
More information3-phase stepping motors
General Series of Features from Berger Lahr are: Powerful because the optimised internal geometry results in a high power intensity, meaning up to 50 % more torque than standard stepping motors of comparable
More informationFeatures & Benefits. Options & Accessories
Quantum Frameless Brushless Servo Motors Brushless component (rotor and stator) servo motor Allied Motion's Quantum (QB) series of frameless brushless servo motors are specifically designed for direct
More informationBRAKE MOTORS. 1. Brake motors TECHNICAL CATALOGUE. M Series / Standard / IEC
1. Brake motors Standard motors (TS, TH, TP, D) can be constructed as brake motors (TBS, TBH, TBP, DB) when the driven machine must be stopped quickly and safely. This is done without modifying the motor
More informationLexium integrated drives
Description ILp for CANopen, PROFIBUS DP, RS ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for CANopen DS, PROFIBUS DP or RS and a brushless DC motor.
More informationStandard Street, El Segundo CA BRUSHLESS SERVO MOTORS
BRUSHLESS SERVO MOTORS To accommodate your complete servo system requirements, Glentek manufactures four complete series (GMB, GMBF, GMBM and GMBN) of high performance, permanent magnet brushless servo
More informationStandard AC Motors C-9
Standard AC C-9 Overview, Product Standard AC Constant Speed Constant Speed Reversible Reversible Brake Brake Clutch & Brake Clutch & Brake Synchronous Synchronous Torque Watertight, Dust-Resistant Gearheads
More informationRoHS-Compliant 2-Phase Stepping Motors PK Series
RoHS-Compliant 2-Phase Stepping Motors PK Series RoHS-Compliant 2-Phase Stepping Motor PK Series Stepping motors enable accurate positioning operation with ease. They are used in various types of equipment
More informationAC servo systems P Series
AC servo systems P Series Servomotors Capacity 30 to 1,000(13 types) Features High rigidity Faster servos Maximum rotating speed of min -1 for quicker positioning. ses Robots Machines with windings Machines
More informationProduct Cross Reference
AF120 US, AF120-S US AF230 US, AF230-S US AFBUP, AFBUP-S, AFXUP, AFXUP-S Torque 133 in-lb [15 Nm] minimum 180 in-lb. [20 Nm] minimum OPERATION Running Time Noise Level < 75 seconds
More informationUS Series Single-Phase 110/115 VAC Single-Phase 220/230 VAC
RoHS-Compliant Speed Control Motor and Control Unit Package US Series Single-Phase 11/11 VAC Single-Phase 22/23 VAC RoHS-Compliant Speed Control Motor and Control Unit Package US Series Single-Phase 11/11
More informationSEE IT BEFORE IT HAPPENS SKA ROTARY TABLE DIRECT DRIVE MOTORS
SKA ROTARY TABLE DIRECT DRIVE MOTORS Mo t or Pow e r Com pa n y www.motorpow e rc o. c om info@motorpow e rc o. i t All r ight s re se rve d. Complet e or pa rt i a l re produ c t i on is no t allow e
More informationDYNASYN DD servo motors. Dynamic. Compact. Energy-efficient.
DYNASYN DD servo motors. Dynamic. Compact. Energy-efficient. B E N E F I T S Maximum dynamic response Increased energy efficiency High cost effectiveness Long service life Single-cable solution 2 DYNASYN
More informationNon-Spring Return EconoDrive Floating Actuator
MF4D-0x Series Non-Spring Return EconoDrive Actuator EconoDrive overshaft actuators are designed to provide an economical and reliable solution for many overshaft damper and ball valve requirements. All
More informationSynchronous servo motors. IndraDyn S MSK - to meet all requirements
IndraDyn S MSK - to meet all requirements Bosch Rexroth AG Electric Drives and Controls Compact and powerful Documentation Project Planning Manual Application Manual - For Potentially Explosive Areas Maximum
More informationLexium integrated drives
Description ILp for DeviceNet, EtherCAT, Modbus TCP, ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for DeviceNet, EtherCAT, Modbus TCP or and a brushless
More informationKNC-PKS-FD S-AAK-DKH
KNC-PKS-FD123-02 - Servo System FEATURES 24-70VDC of 90 oz-in Power Ratings up to 200 Watts 2,500 PPR Incremental Encoder Maximum Speed of 6000 RPM IP65 for Body, IP54 Shaft Seal Brake Option Available
More information