Product information Electronic devices. Typ: CONV DIN. Conversion of KTY84- into PT1000- sensor signal. Pt / KTY Converter
|
|
|
- Melanie Warner
- 5 years ago
- Views:
Transcription
1 Pt / KTY Converter - Basic information The discontinuation of the KTY84 and KTY83 sensor types and an increasing use of Pt1000 sensors leads to lack of KTY sensor signal processing units. The converter allows the use of a KTY84 sensor in conjunction with evaluation electronics suitable only for Pt1000 sensors. Old equipment with KTY sensors can be easily connected to newer control units. - Application Operation of motors, generators or other thermally sensitive devices equipped with KTY sensors by modern control units which expect Pt1000 sensors at the input. - General function The converter evaluates the resistance of a KTY84 and provides the corresponding resistance of a Pt1000 sensor. When connected to a KTY84, the converter replaces a Pt1000 sensor.. - Advantage No need to change a motor or other equipment containing a KTY sensor when replacing the control unit. Connection of devices with different sensors to one control unit is possible. Spare parts with KTY-sensors can be used in newer systems. 1-5
2 - Converter output vs. measured temperature Figure 1 shows the R vs. T diagram over the entire measurement range. Blue: Typical converter output corresponding to the Pt1000 characteristic curve Green: Typical KTY characteristic curve according to the NXP datasheet Red: Allowable tolerance band of the converter output corresponding to the typical KTY84 tolerance band according to the NXP datasheet Figure 2 shows an enlarged view of resistance vs. temperature curves from Figure 1. The ripples in the converter output curve result from the internal discrete resolution of the output IC, which is approx. 10 Ω 2-5
3 Electrical data Input: Output: Power supply: Terminals: 1 sensor KTY84-xxx Pt V (22 Vdc 26 Vdc) (with galvanic isolation) Test voltage 1kv DC+ / DC- Power consumption: < 1VA ambient temperature: C storage temperature: -40 C C temperature measurement range: -40 C C Mechanical data housing: material: dimensions: Plastic blue Polyamide width x height x dept. 22,5mm x 107mm x 99 mm mounting: DIN-rail TS 35 protection class (device): IP 20 connection: screw terminal pitch 5mm max. 2,5mm² order code: page5 Additional functions wire break or short circuit: module online: Sensor IN Typ. measurement current: Terminal: Sensor OUT Max. current: Terminal: red LED green LED <1mA KTY+ / KTY- 10mA Pt+ / Pt- Terminals NC not connected. 3-5
4 - Technical data Dimensions: 4-5
5 Order code: Product Name Voltage Sensor IN Sensor OUT Dimension CONV-DIN-KTY84-24V DC KTY84-130, KTY Pt mm*99mm*22,5 Pt1000 mm part number Other KTY sensors on request Disclaimer: The statements concerning our products are based upon our current technical knowledge and application technological experience. Liability shall be accepted in the context of the individual contract according to our deliveryand sales conditions. The user is not released to check our information and recommendations before using the product. In the course of our product development, we reserve the right to make technical changes. 5-5
Product information Electronic devices. Typ: CONV DIN. Converter for Pt-sensor as KTY-alternative. Pt / KTY Converter
Pt / KTY Converter - Basic information The converter evaluates the resistance of a Pt sensor and provides the corresponding resistance of a KTY sensor. It can replace for the discontinued KTY84 sensor
Type 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
VEO. V2TF01 Art.Nr.: V2TF01P Art.Nr.: TECHNICAL DATA
P Temperature monitoring (PTC) Short-circuit monitoring Supply voltage 24-240 V AC/DC 1 normally open contact Width 22,5 mm Status indication LED U: Supply voltage LED TFailure: Temperature failure TECHNICAL
Pluggable interface relays RT, PT and MT range
Content Pluggable interface relays RT, PT, MT Benefits and advantages, approvals... 190 Ordering details... 191 Technical data... 194 Circuit diagrams... 19 Dimensional drawings... 19 189 Benefits and
Type CGS High-Cap Screw Terminal Aluminum Electrolytic Capacitor
High CV, Screw Terminal Capacitors Specifcations Type CGS screw terminal, aluminum electrolytic capacitors have a high CV rating and are suitable for use in most demanding applications requiring high current
Electronic Temperature Sensor ETS 300
Description: The ETS 300 is a compact electronic temperature sensor with digital display. Two different models are available for optimum adaptation to particular applications. The ETS 300 with built-in
Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size
Type 381LQ is on average 23% smaller and more than 5 mm shorter than Type 381LX. This is achieved with a new can closure method that permits installing capacitor elements into smaller cans. Approaching
Type 381EL 105 ºC Ultra-Long Life Snap-In, Aluminum More than 100,000 Hours Operation at 65 C and Rated 105 C Ripple OBSOLETE
Specifications Temperature Range Rated Voltage Range 160 to 450 Vdc Capacitance Range 39 µf to 2,200 µf ± 20% Capacitance Tolerance ± 20% Leakage Current Ripple Current Multipliers The new 381EL extends
Screw-in resistance thermometers with plug connector
Data Sheet 90.2004 Page 1/8 s with plug connector for temperatures from -50 to +300 C highly resistant to shock and vibration connector locked in for reliable contact, IP65 or IP69K protection available
Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size
Type 381LQ is on average 23% smaller and more than 5 mm shorter than Type 381LX. This is achieved with a new can closure method that permits installing capacitor elements into smaller cans. Approaching
Control Equipment. ATHEX bvba Tel: +32 (0) Fax: +32 (0) Alpenroosbaan 2, 2900 Schoten, België
Control Equipment 01616E00 Position switches are used to monitor the position of moving parts of machines and plant. Can be used in safety circuits, as the device satisfies EN 60 947-5-1/DIN VDE 0660 part
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
Digital display Pressure range ON/OFF output Linear output Model
Slim Digital Pressure Sensor E8CB/ CSM_E8CB DS_E 1 with Built-in Microcomputer and Digital Display Withstands a of 9 kpa and highly reliable. Incorporates a two-turn adjuster ensuring easy setting. Be
Ordering Information. Text PCB Power Relay G5RL. Low-profile Relay with Various Models. Power Relays
Low-profile Relay with Various Models Low profile:.7 mm in height Clearance and creepage distance Between coil and contacts: 8 mm/8 mm Between contacts of the same polarity: 3 mm/4 mm Models with AC coil
Mechanical Key Switch
Mechanical Key Switch B3F A Wide Range of Models: 6 x 6 mm, 12 x 12 mm, Vertical and High-force. Excellent tactile feel combined with high life expectancy. Available in stick packaging for automatic mounting
Silvertel. Ag Features. 2 Description. Power-Over-Ethernet Module. IEEE802.3af compliant. Small SIL package size - 56mm (L) x 14mm (H) Low cost
Silvertel V2.5 Feb 2014 Datasheet Pb 1 Features IEEE802.3af compliant Small SIL package size - 56mm (L) x 14mm (H) Low cost Input voltage range 36V to 57V Minimal (low cost) external components required
LED Driver Linear / area fixed output industry. Driver LCI 65W 150mA 400mA TOP INDUSTRY sl TOP series
Driver LCI 65W 150mA 400mA TOP INDUSTRY sl TOP series Product description Fixed output constant current built-in LED Driver, particularly suitable for industrial applications in tough enviromments such
Thermal-Magnetic Circuit Breaker 2210-S291-P9M A
Thermal-Magnetic Circuit Breaker 0-S9-P9M-40033-...A Description Single pole thermal-magnetic circuit breaker with trip-free mechanism and toggle actuation. Two-chamber construction with cascade contact
LED Driver Linear / area fixed output industry. Driver LCI 100W 350mA 900mA TOP INDUSTRY sl TOP series
Driver LCI 100W 350mA 900mA TOP INDUSTRY sl TOP series Product description Fixed output constant current built-in LED Driver, particularly suitable for industrial applications in tough enviromments such
CHASSIS MOUNT DC-DC CONVERTERS 4:1 WIDE INPUT RANGE, 150 WATTS RAILWAY APPLICATIONS FWB(D)150 SERIES*
CHASSIS MOUNT DC-DC CONVERTERS 4:1 WIDE INPUT RANGE, 150 WATTS RAILWAY APPLICATIONS * FEATURES 4:1 Wide Input Range (9-36, 43-160Vdc) No Minimum Load Required High Efficiency: Up to 89% Built In EN55011
Solenoid interlocks AZM 190 range. 128 Schmersal ,3 4,5 M20 17,5 23,5
2.19 AZM 19 range 13 44 32 2,3 3 1 Features Voltage variants Approvals Thermoplastic enclosure Manual / Emergency release Long life Actuation on de-energisation or energisation Slim design, particularly
Ordering Information. Text PCB Power Relay G5LE
A Cubic, Single-pole 10-A Power Relay Single-pole 10A 35VDC, 0.8mm contact gap: G5LE-G Single-pole 16A 250VAC: G5LE-E ROHS compliant. Sub-miniature sugar cube relay with universal terminal footprint. Conforms
Type 381LX / 383LX 105 C High Ripple, Snap-In Aluminum High Ripple, Long Life, 2, 4 and 5 pin styles available
High Ripple, Long Life, 2, 4 and 5 pin styles available Specifications Temperature Range Rated Voltage Range Adding longer-life and more ripple capability to the excellent value of Type 380L/LX capacitors,
Type Contact form Enclosure ratings Model Standard SPST-NO (Class A) Flux protection G5LA-1A Sealed
PCB Relay G5LA A Cubic, Single-pole 1A Power Relay Economical cube relay with universal terminal footprint Conforms to VDE435, CQC UL recognized/ CSA certified. High switching power: 1A @ 5VAC Withstands
Scheda prodotto Relè Series B
Relè di Potenza All-or-Nothing Relays designed to meet high power switching applications with up to three changeover contacts, rated 4000 or 7500 VA - AC1. They are ideally suited for arduous duties where
PCB Relay. Contact form Terminal Single-side stable Single-winding latching
PCB Relay Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98 mw pickup coil power. Impulse withstand voltage meets FCC Part 68 requirements. Plastic-sealed construction. Unique moving
2/2 or 3/2 way direct acting rocker solenoid valve
2/2 or 3/2 way direct acting rocker solenoid valve With isolating diaphragm Ultra low dead volume Type 6126 can be combined with... High back-pressure tightness Normally closed, normally open or universal
Temperature sensors. Fluidcontrol
Temperature sensors Changes in the viscosity of hydraulic oil and lubricants due to the temperature requires precisely monitoring and stabilising the operating temperature. Carefully monitoring the temperature
Digital display Pressure range ON/OFF output Linear output Model
Slim Digital Pressure Sensor E8CC with Built-in Microcomputer and Digital Display Withstands a pressure of 49 kpa and highly reliable. Incorporates a two-turn pressure adjuster ensuring easy pressure setting.
For full product information, visit Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page.
Safety Interlock Switches D4S-N D4SN For full product information, visit www.sti.com. Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page. Slim Safety Door Switches with
SDS05-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage Range Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE SDS05-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage
TRC ELECTRONICS, INC DC/DC Converter SIP Package 6W MEAN WELL SPBW06 & DPBW06 Series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (TYP.) CAPACITOR LOAD (MAX.) SPBW06F-03 310mA 3.3V 0 ~ 1500mA 81% 4700μF SPBW06F-05
NXJ1 Series Isolated 1W Single Output SM DC-DC Converters
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES-, 2 MOOP, MOPP Recognised 4.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
Input Voltage Range ±10% Output Voltage Accuracy Line Voltage Regulation RSS, RSS8, RSD, RSD10 1.2%/1% of Vin typ.
END OF LIFE Dec.11 Features Unregulated Converters Selection Guide RoHS 5/6 Conform 1kVDC or3kvdc Isolation Options H version Approved for Medical Applications Suitable for Fully Automated Assembly Optional
DPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
Pressure transmitter for industrial applications Type MBS 4510
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for industrial applications Type MBS 4510 The high accuracy flush diaphragm pressure transmitter MBS 4510 is designed for use in non-uniform,
Industrial Relay KML(1C, 2C)
Industrial Relay KML(1C, 2C) Features 1C: 15A, 2C: 10A switching capability 1.5kV dielectric strength (between coil and contacts) Various terminals available Socket available 1 & 2 poles configurations
Pressure transmitter for general purpose Type MBS 1700 and MBS 1750
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for general purpose Type MBS 1700 and MBS 1750 The compact pressure transmitters MBS 1700 and MBS 1750 are designed for use as a general purpose
General Purpose Relay
General Purpose Relay KML 15A switching capability 1.5kV dielectric strength (between coil and contacts) Various terminals available Socket available 1 to 3 pole configurations 1. COIL DATA (at 23 ) 1)
DPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
UNISONIC TECHNOLOGIES CO., LTD UC5301
UNISONIC TECHNOLOGIES CO., LTD UC5301 SWITCHED-CAPACITOR VOLTAGE INVERTERS DESCRIPTION The UTC UC5301 is an unregulated charge-pump voltage inverter. It can be used to generate a negative supply from positive
DPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND
DPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND OUTPUT
Thermal Overcurrent Circuit Breaker 3120-F...
Thermal Overcurrent Circuit Breaker -F... Description An extremely versatile range of rocker switch/thermal circuit breakers (S-type TO CBE to EN 694 with trip free mechanism) offering the choice of single
Type 380LX / 382LX 85 C High Capacitance, Snap-In Aluminum
The excellent value of Type 380L/LX capacitors finds application in switching power supply input and output circuits and even motor drives where the high surface area of multiple units in parallel approaches
Thermal Overcurrent Circuit Breaker 3120-F...
Description An extremely versatile range of rocker switch/thermal circuit breakers (S-type TO CBE to EN 6094 with trip free mechanism) offering the choice of single pole, double pole with single pole protection,
TL-W. Standard Flat Sensors in Many Different Variations. Flat Inductive Proximity Sensor. Ordering Information
Flat Inductive Standard Flat s in Many Different Variations Only 6 mm thick yet provides a sensing distance of mm (MC1). Aluminum die-cast models also available. Be sure to read Safety Precautions on page
Steering column and sensor
Steering column and sensor Type LAB Series 1 x Nominal voltage 12 to 48 volt Output signal digital, analog and direction (option) HE 11874 / 09.2017 2 LAB HE 11874 / 09.2017 Page Content 4 4 5 6 7 7 8
MINI MCR-SL-UI-UI(-SP)(-NC)
Configurable 3-Way Isolating Amplifier Data Sheet 04/2005 Functions Features The configurable 3-way isolating amplifier MINI MCR-SL-UI-UI(-SP)(-NC) is used to electrically isolate, condition, amplify,
Thermal-magnetic Miniature Circuit Breaker 4230-T...
Thermal-magnetic Miniature Circuit Breaker 420-T... Description Single pole and multipole thermal-magnetic miniature circuit breakers (MCBs) in accordance with EN 60947-2, UL 077 and UL 489 for DIN rail
AnyVolt3. General Description The AnyVolt3 is a miniature step up / step down switching DC-DC converter. The output is adjustable from 3 to 24V.
AnyVolt3 General Description The AnyVolt3 is a miniature step up / step down switching DC-DC converter. The output is adjustable from 3 to 24V. The output voltage is set with a small screw potentiometer
PRODUCTS FOR ELECTRIC VEHICLE CHARGING STATIONS
IN THE REGION. WE ALSO PROVE THIS WITH TOP COMPONENTS FOR THE ELECTRIC. MINIATURE CIRCUIT BREAKERS (M) IN THE REGION. WE ALSO PROVE THIS WITH TOP COMPONENTS FOR THE ELECTRIC. MINIATURE CIRCUIT BREAKERS
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW
PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option
Silvertel. Ag Features. 2. Description. Power-Over-Ethernet Module. IEEE802.3af compliant. Small SIL and SMT package available
Silvertel V2.2 Jan 2015 Datasheet Ag9700 Pb 1. Features IEEE802.3af compliant Small SIL and SMT package available Low cost, with minimal external components required Input voltage range 36V to 57V Short-circuit
LED Driver Linear / area fixed output
Driver LC 65W 4-7mA flexc lp ANCED series Product description Built-in constant current LED Driver Adjustable output current between 4 and 7 ma Max. output power 65 W Up to 94 % efficiency Nominal life-time
Pressure transmitter for industrial applications Type MBS 4500
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for industrial applications Type MBS 4500 The high accuracy pressure transmitter MBS 4500 is designed for use in almost all industrial applications,
Type BPDS Polypropylene Board Mount DC Link Capacitors PCB Mount Power Film Capacitors
Specifications Capacitance Range Capacitance Tolerance 1μF - 200 μf ±5%(J) ±10%(K) Rated Voltage 450 Vdc - 1800 Vdc @ 85 C, 500 Vdc - 2000 Vdc @ 70 C Maximum Operating Temperature +105 C Upper Temperature
Electronic circuit breaker EBU10-T
Description The electronic circuit protector type EBU10-T (Electronic Breaker Unit) provides selective overcurrent protection in AC 230 V UPS systems. It consists of an MCB approved for short circuit interruptions
RCD15W Series PART NUMBER STRUCTURE
DC/DC Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE RCD15-48 S 05 W - M3 A HC Series Name Input Output Output Input Operating Temp.
Electronic Pressure Switches
96 Pressure Switches Electronic Pressure Switches Electronic Electronic pressure switches, series, Very attractively priced electronic pressure switches, particularly for high volume deployment High overpressure
PG02S Series 2W DC/DC CONVERTER, SIP-Package
PG02S Series 2W DC/DC CONVERTER, SIP-Package FEATURES Efficiency up to 81% SIP Package with Industry Pinout Small Footprint: 21.8 x 9.3 mm (0.86 x 0.37 inch) Wide 2:1 Input Range Operating Temperature
onlinecomponents.com Compact Coded Magnetic Safety Interlock Switch and Control Unit
C Conforms to EN94-1, EN1088, EN60204-1 UL and C-UL listed Description R US Compact Coded Magnetic Safety Interlock Switch and Control Unit Dual channel, fully monitored system; meets Category 3 when single
JUMO ecotrans Lf 01/02
Data Sheet 07 Page /7 JUMO ecotrans Lf 0/0 Microprocessor Transmitter/Switching Device for Conductivity Housing for DIN rail mounting (5 mm 7.5 mm to EN 075 A.) Brief description The JUMO ecotrans Lf 0/0
B115...B180 RF200 RFN200 B250...B400 RF400 RFN400
Page -2 Page -4 Page -6 FOR BG SERIES MINI-CONTACTORS Type RF9, phase failure sensitive, manual resetting Type RFA9, phase failure sensitive, automatic resetting Type RFN9, non-phase failure sensitive,
Remote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System
Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules
ELECTRIC POWER REGULATION TEMPERATURE CONTROLLERS. room C
ELECTRIC POWER REGULATION STS converts 0 10 V signal to one time proportional and up to 3 contact. Each step must be identical in power. input output 1 2- number of steps 2 Vac, 1 VA 0 10 Vdc < 1 ma for
Product discontinuation. Notices. Discontinuation Notice of Safety Relay and Socket. G7S series, P7S series. Wire connection
PRODUCT NEWS Product Discontinuation Notices February 1, 2012 Safety Relays No. 2012037E Discontinuation Notice of Safety Relay and Socket., P7S series Product Discontinuation Safety Relay Socket P7S series
Experience bright and vivid colors
SLM 1205 PW L13 Gen5 Datasheet Experience bright and vivid colors Fortimo LED SLM 1205 lm PW L13 Fortimo LED SLM Gen5 continues to focus on the combination of Quality of Light and performance. By offering
Power consuption motor (motion) Power consuption standby (end position) Auxiliary switch Contact load Switching point
Actuators Technical data sheet Continuous control of spring return actuator Description Spring-return actuator for adjusting and regulating dampers and valves in air conditioning and ventilation. Torque
2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection
Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection Description The series / converters are certified
PCB Relay. 2. Contact Form 2: DPDT 3. Terminal Shape None: PCB terminal F: Surface mount terminal
PCB Relay Ultracompact, Ultrasensitive DPDT Relay Compact size and low 5-mm profile. Low power consumption (140 mw for single-side stable, 100 to 300 mw for latching type) and high sensitivity. Low thermoelectromotive
Inductive Proximity Sensor
Inductive Proximity Sensor General-purpose Type in a Basic Switch Housing Mounting pitch compatible with that of mechanical basic switch. Wide operating voltage range: 10 to 30 VDC or 90 to 250 VAC. LED
G7S. Ordering Information. Plug-In Safety Relay. Safety Relay for Machine Control Conforms to EN Standard. H Suitable for safety circuits in press
Plug-In Safety Relay Safety Relay for Machine Control Conforms to EN Standard H Suitable for safety circuits in press machinery, machine tools, and other production machinery Do Not Remove H CE mark (conforms
Silver T E L E C O M. 1. Features. 2. Description. IEEE802.3af compliant. Small SIL package size - 56mm (L) x 14mm (H) Low output ripple and noise
Silver T E L E C O M V2.0 Aug 2008 Pb. Features IEEE802.3af compliant Small SIL package size - 56mm (L) x 4mm (H) Low output ripple and noise Input voltage range 36V to 57V Only one low cost external decoupling
Power consuption Motor (Motion) Power consuption Standby (end position) Auxiliary switch Contact load Switching point
Actuators Technical data sheet Continuous control rotary drive without spring return Description Actuator for adjusting air dampers of 90 angle of rotation to be used in HVAC installations. Torque Motor
E2EZ-X2D1-N E2EZ-X2D2-N
Chip-immune Inductive s Detects Objects without Being Influenced by Aluminum or Iron Chips Series now includes M s. s also available. CE Marking for DC -Wire and DC -Wire s. Be sure to read Safety Precautions
DATA SHEET. Three Phase Induction Motor - Squirrel Cage. Customer : Product code : : W22 NEMA Premium Efficiency Three-Phase
DATA SHEET Frame Output Poles Frequency Rated voltage Rated current L. R. Amperes LRC No load current Rated speed Slip Rated torque Locked rotor torque Breakdown torque Insulation class Service factor
JUMO thermocor. Portable measuring system for AMS2750 and CQI-9. Brief description. Block diagram. Special features. JUMO thermocor.
Page 1/8 JUMO thermocor Portable measuring system for AMS2750 and CQI-9 Brief description The JUMO thermocor is a high-precision documenting test device with 12 analog inputs for thermocouples. The use
Power consuption Motor (Motion) Power consuption Standby (end position) Auxiliary switch Contact load Switching point
Actuators Technical data sheet Continuous control of rotary drive without spring return Description Actuator for adjusting air dampers of 90 angle of rotation to be used in ventilation and air conditioning
LED control gear Compact fixed output
Driver LCI 65 W 1400/1750 ma TEC SR TEC series Product description Independent fixed output LED Driver Constant current LED Driver Output current 1,400 or 1,750 ma Max. output power 65 W Nominal life-time
Adjustment range. Seal material. Pressure connection
0520 Order matrix for electronic pressure switches.3 Type Adjustment range Pressure connection Seal material lectrical connection Type lectronic pressure switch 0520 Adjustment range 1) for NO 0 145 psi
HAE S 05 - P HS Series Name Input Output Output Ctrl and Assembly Option Voltage Quantity Voltage Pin Options
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE DIP Type: HAE100-48 S 05 - P HS Series Name Input Output Output Ctrl and Assembly Option
Thermal Overcurrent Circuit Breaker 3120-F...
Thermal Overcurrent Circuit Breaker 0-F... Description An extremely versatile range of rocker switch/thermal circuit breakers (S-type TO CBE to EN 6094 with trip free mechanism) offering the choice of
INDUSTRIAL POWER SUPPLIES SFL-SERIES
INDUSTRIAL POWER SUPPLIES SFL-SERIES Operating Instructions 1. Application The SFL-series are compact, rugged switching power supplies designed for applications in process automation and other industrial
NCS6 Series Isolated 6W 4:1 Input Single & Dual Output DC/DC Converters
FEATURES RoHS compliant : Wide range voltage input Operating temperature range C to 8 C Typical load regulation from.%.kvdc Isolation Typical effi ciency to 8% V & 8V Nominal input Power density.9w/cm
Silvertel. Ag Features. 2. Description. Power-Over-Ethernet Module for CCTV. IEEE802.3af compliant
Silvertel V2.4 August 202 Datasheet Pb. Features IEEE802.3af compliant Standard CCTV package sizes - 38mm x 38mm x 6mm (H) or 42mm x 42mm x 6mm (H) Low cost Input voltage range 36V to 57V Input diode bridges
HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 150 WATT RAILWAY APPLICATIONS HWB150 SERIES
DATA DATA SHEET SHEET HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 15 WATT RAILWAY APPLICATIONS FEATURES No Minimum Load Required 225 Input to Output Basic Insulation Railway Applications 4:1
Intelligent Lift Control Valve with Electronic Card
Intelligent Lift Control Valve with Electronic Card Q max = 500 l/min, p max = 80 bar Leak-free, two-stage, electronically controlled, without frequency control i50 and i500 Information lift-control valve
NXJ2 Series Isolated 2W Single Output SM DC-DC Converters
NXJ2 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL69 Recognition pending ANSI/AAMI ES661-1, 2 MOOP, 1MOPP recognition pending 5.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer
HAE S 05 - P TH HS PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE HAE100-48 S 05 - P TH HS Series Name Input Output Output Ctrl and Through hole Assembly
Electronic Pressure Switches
96 Pressure Switches Electronic Pressure Switches Electronic E. Electronic pressure switches, series, Very competitively priced electronic pressure switches High overpressure protection (up to x) Small,
PF6 Stainless Steel Piston Actuated On/Off Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
ENGLISH Datasheet Platinum Resistance Pt100 4 wire class B Resistance Thermometer with Compact KNS Head
ENGLISH Datasheet Platinum Resistance Pt100 4 wire class B Resistance Thermometer with Compact KNS Head Pt100 probe with compact KNS terminal head Class B, 4 wire connection Various probe available lengths
Aluminum Electrolytic Capacitors Radial Standard Ultra Miniature
Aluminum Electrolytic Capacitors Radial Standard Ultra Miniature FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case, insulated with a blue
PTC, NTC, Pt100 (special designs of all sensors on request) +15K +5K T [ C]
![PTC, NTC, Pt100 (special designs of all sensors on request) +15K +5K T [ C]](/thumbs/80/82009258.jpg "PTC, NTC, Pt100 (special designs of all sensors on request) +15K +5K T [ C]")
[kw] 100 Application: PTC, NTC and Pt100 sensors are used for measuring the temperature of machines and installations. Due to the con- structive design the thermal response times is short and the sensors
3M Three-Wall and Four-Wall Headers. Series 3XXX
1 of 7 M Three-Wall and Four-Wall Headers Series XXX Product 78-10-0008-0 Released: 0-0-11 of 7 Table of Contents Section Page 1. Scope........ M Customer Documents....... Performance and Test Descriptions...
Recommended use With its standard enclosure, the ENM2 limit switch can be used universally in all industrial and safety applications.
Metal-Enclosed Limit Switches ENM2 Recommended use With its standard enclosure, the ENM2 limit switch can be used universally in all industrial and safety applications. Product advantages Standard switch
Insertion thermometer With connection lead Model TF45
Temperature Insertion thermometer With connection lead Model TF45 WIKA data sheet TE 67.15 Applications Solar thermal systems, renewable energies Machine building Compressors Cooling, heating, ventilation
3/2-way Rocker Solenoid Valve for pneumatic systems
3/-way Rocker Solenoid Valve for pneumatic systems EEx ia versions Direct-acting High cycling rate Reduced power consumption Type 6104 can be combined with... Sub-base connection Approvals: Type 654 Servo-assisted