MonoLine Line Voltage Flexible Track SYSTEM COMPONENTS

Transcription

1 Project: Fixture Type: Location: Contact/Phone: ML4 MonoLine 4 Foot Rail Section (Includes Two MLE) Hand bendable aluminum core track. Track may be bent to a minimum radius of 18". Rated 20 amps at 120 volts. End caps included. 13/16 Height 48 Length ML4 STN ML4-STN ML8 MonoLine 8 Foot Rail Section (Includes Two MLE) Hand bendable aluminum core track. Track may be bent to a minimum radius of 18. Rated 20 amps at 120 volts. End caps included. 13/16 Height 96 Length ML8 STN ML8-STN MLE MonoLine Standard End Caps (Set of 2) Covers exposed conductor ends of MonoLine track. Required when installing track sections cut in the field. 13/16 Height 1/4 Length MLE CLR MLE-CLR CLR Clear MLE2 MonoLine Decorative End Cap Covers (Set of 2) For MonoLine Track Section. Replaces the MLE end cap supplied with MonoLine Track. 7/8 Height 11/16 Length MLE2 STN MLE2-STN MLJ1 MonoLine Straight Joiner Mechanically joins and continues power from one track section to another. 20 amp max. Adds 1/2 length between track sections. 1-1/4 Height 1-7/8 Length MLJ1 STN MLJ1-STN MLJ2 MonoLine Non- Straight Joiner Mechanically joins one track section to another. Adds 1/2 length between track sections. 1-1/4 Height 1-7/8 Length MLJ2 STN MLJ2-STN REV-3/14/16

2 MLJ3 MonoLine Flexible Joiner Joins two track sections at various angles. Continues power from one track section to another. 20 amp max. 1-1/4 Height 8-1/8 Length MLJ3 STN MLJ3-STN MLJ4 MonoLine Hinged L Joiner Adjusts from straight to 90 angle. Mechanically joins and continues power from one track section to another. 20 amp max. 1-1/4 Height 4 Length (max.) MLJ4 STN MLJ4-STN MLJ6 MonoLine T Joiner Mechanically connects and continues power at the junction of three track sections to form a T. 20 amp max. Adds approximately 1-1/2 length to each track from intersection point 1-1/4 Height 4 Length (max.) MLJ6 STN MLJ6-STN MLS1 MonoLine Standard Stem Support for Rigid Ceilings Order RSE Support Extensions to increase length if necessary. 5-1/4 Overall Height MLS1 STN MLS1-STN MLS2 MonoLine Standard Stem Support for T-Bar Ceilings Order RSE Support Extensions to increase length if necessary. 5-1/4 Overall Height MLS2 STN MLS2-STN MLS3 MonoLine Cable Support Single screw mounting to ceiling. 12 aircraft cable. Easily adjusts with set screw. 12 Height MLS3 STN MLS3-STN

3 MLS10 MonoLine Connecting Support for Rigid Ceilings Mechanically joins and continues power from one track section to another. 20 amp max. Adds 1/2 length between track sections. Order RSE Support Extensions to increase length if necessary. 5-1/4 Overall Height 1-7/8 Length MLS10 STN MLS10-STN MLS11 MonoLine Non- Connecting Support for Rigid Ceilings Mechanically joins one track section to another. Adds 1/2 length between track sections. Order RSE Support Extensions to increase length if necessary. 5-1/4 Overall Height 1-7/8 Length MLS11 STN MLS11-STN MLS14 MonoLine Hinged L Joiner/Support Supports MonoLine at standard 5 system height. Adjusts from straight to 90 angle. Mechanically connects and continues power from one section track to another. 20 amp max. Adds approximately 1-1/2 length to each track from intersection point. 5-1/4 Overall Height 4 Length (max.) MLS14 STN MLS14-STN MLS16 MonoLine T Joiner/Support Supports MonoLine at standard 5 system height. Mechanically connects and continues power at the junction of three track sections to form a T. 20 amp max. Adds approximately 1-1/2 length to each track from intersection point. 5-1/4 Overall Height 4 Length (max.) MLS16 STN MLS16-STN MLS30 MonoLine Connecting Cable Support Single screw mounting to ceiling. 12 aircraft cable. Mechanically joins and continues power from one track section to another. 20 amp max. Adds 1/2 length between track sections. Easily adjusts with set screw. 12 Height MLS30 STN MLS30-STN MLS31 MonoLine Non- Connecting Cable Support Single screw mounting to ceiling. 12 aircraft cable. Mechanically joins one track section to another. Adds 1/2 length between track sections. Easily adjusts with set screw. 12 Height MLS31 STN MLS31-STN

4 MLS50 MonoLine Sloped Ceiling Support Enables MonoLine to suspend properly on a sloped ceiling. Standard length is 12. Order RSE Support Extensions to increase length if neccessary. Custom lengths can be ordered pre-assembled consult factory. 12 Height MLS50 STN MLS50-STN MLS61 MonoLine Wall Support Supports MonoLine at standard 24 distance from wall. Distance from wall may be shortened in the field if desired. Includes aircraft cable support and mounting hardware. 24 Distance From Wall MLS61 STN MLS61-STN MLP165 MonoLine L Wall Feed Supports and feeds MonoLine at standard 24 distance from wall. Adjusts from straight to 90 angle. Mechanically connects and continues power from wall feed to track section. Distance from wall may be shortened in the field if desired. Includes aircraft cable support and mounting hardware. 20 amp max. Adds approximately 1-1/2 length to track from intersection point. 24 Distance From Wall MLP165 STN MLP165-STN MLP166 MonoLine T Wall Feed Supports and feeds MonoLine at standard 24 distance from wall. Mechanically connects and continues power at the junction of two track sections to form a T. Distance from wall may be shortened in the field if desired. Includes aircraft cable support and mounting hardware. 20 amp max. Adds approximately 1-1/2 length to track from intersection point. 24 Distance From Wall MLP166 STN MLP166-STN MLS64 MonoLine Wall End Support Supports MonoLine termination to a perpendicular wall. MLS64 STN MLS64-STN MLP164 MonoLine Wall End Mounts over J-box. Allows end feed from wall. 20 amp max. MLP164 STN MLP164-STN

5 MLP104 MonoLine 4 Foot Floating Powers system at any point along the track. Flexible cable shield protects wiring. Mounts over J-Box. Field cuttable to length. 20 amp max. 48 Height MLP104 STN MLP104-STN MLP112 MonoLine 12 Foot Floating Powers system at any point along the track. Flexible cable shield protects wiring. Mounts over J-Box. Field cuttable to length. 20 amp max. 144 Height MLP112 STN MLP112-STN MLP140 MonoLine Standard Stem Supports and feeds track at standard 5 offset. Mounts over J-Box. Length cannot be extended. 20 amp max. 5-1/4 Overall Height MLP140 STN MLP140-STN MLP14x MonoLine Long Stem s Supports and feeds track at chosen offset. Mounts over J-Box. Field cuttable to length. 20 amp max. MLP142 STN MLP142-STN MLP Stem MLP Stem MLP Stem MLP Stem MLP150 MonoLine Sloped Ceiling 12 length field cuttable. 20 amp max. Mounts over J-Box. Can be extended up to 48 with MLF-EXT. (Order separately). 12 Height MLP150 STN MLP150-STN

6 MLP1J1 MonoLine Stem Mounted End Feeds Supports and feeds MonoLine from end of track. Height of stem is specifiable from 5 to 48 in defined lengths. Includes mounting canopy, stem and feed connector. 20 amp max. Adds approximately 1-1/2 length to track from intersection point. MLP1J1-12 STN MLP1J1-12-STN MLP1J1-2 2 Stem MLP1J1 5 Stem MLP1J Stem MLP1J Stem MLP1J Stem MLP1J Stem MLP1J4 MonoLine Stem Mounted Hinged L Joiner/Feeds Supports, joins and feeds MonoLine at intersection of track. Provides power to track in both directions (same electrical circuit). Adjusts from straight to 90 angle. Height of stem is specifiable from 5 to 48 in defined lengths. Includes mounting canopy, stem and joiner/feed connector. 20 amp max. Adds approximately 1-1/2 length to each track from intersection point. MLP1J4-12 STN MLP1J4-12-STN MLP1J4-2 2 Stem MLP1J4 5 Stem MLP1J Stem MLP1J Stem MLP1J Stem MLP1J Stem MLTQJ75 MonoLine Quick Jack Transformer Adapter 12V, 75W electronic transformer. For all incandescent fixtures/pendants using the Quick Jack connector. 4-5/16 Overall Height 2-1/16 Width MLTQJ75 STN MLTQJ75-STN MLTQJL75 MonoLine LED-Compatible Quick Jack Transformer Adapter 12V, 60W electronic transformer. For all LED fixtures/pendants using the Quick Jack connector. 4-5/16 Overall Height 2-1/16 Width MLTQJL75 STN MLTQJL75-STN

7 RSE MonoLine Support Extensions MLF-EXT Extensions Replaces shorter standard stems in MLS1, MLS2, MLS10, MLS11, MLS14, MLS16 and MLS50 Supports to increase track displacement from ceiling. Field cuttable. RSE-12 STN RSE-12-STN RSE Length RSE Length RSE Length RSE Length Replaces standard stems in MLP142, MLP144, MLP146 and MLP148 s to increase or reduce track displacement from ceiling. Field cuttable. MLF-EXT12 STN MLF-EXT12-STN MLF-EXT12 12 Length MLF-EXT24 24 Length MLF-EXT36 36 Length MLF-EXT48 48 Length JLG-B100 MonoLine/Flex 12 Portable Bending Machine Portable bending machine for both MonoLine and Flex 12 flexible track. MonoLine may be bent to a minimum radius of 18". Conveniently clamps to a rigid work surface and easily makes smooth, precise, reliable bends. Provided with a durable, hard-shell carrying case. Model JLG-B100 Example JLG-B S. Wolf Road Des Plaines, IL Phone (847) Fax (847) Chrysler Drive Brampton, Ontario Canada L6S 6B6 Phone (905) Fax (905) Visit us at Printed in U.S.A Acuity Brands Lighting, Inc.