LSI 20 Series 30A, 120V Surface Busway Components 1
|
|
- Patience Nelson
- 5 years ago
- Views:
Transcription
1 LSI Busway System
2 LSI 20 Series 30A, 120V Surface Busway Components 1 IBEW union made at LSI plant in USA Specification grade heavy duty.075 (1.8mm) extruded aluminum busway 8 foot (2.4m) and 12 foot (3.7m) field cuttable lengths One circuit 30 amp or two circuit 60 amp capacity/120 volt Oversized copper busbars equivalent to #10 AWG wire used as busway conductors Separate neutral busway conductor used for each circuit Black, White, Silver, and Graphite finishes All Joiner/Feeders, Mini-Joiners, End Feeds and End Caps are injection molded of fiber reinforced Lexan All Joiner/Feeders are prewired and simply couple into busway Most Joiner/Feeder circuits can be easily field modified All Feeder contacts and busbars are plated for extra corrosion resistance Fixture fitting, with integral safety interlock on/off switch, recesses into busway for minimum profile US Patent # B1 Surface Busway Sections 8' 12' 120V Surface Busway Sections are used in conjunction with an End Feed, End Cap and a variety of Joiner/Feeders to form busway runs and configurations. Busway Section lengths are 8 foot (2.4m) and 12 foot (3.7m) which are field cuttable. Actual length 8 Ft 12 Ft Silver One Ckt Two Ckt Black One Ckt Two Ckt White One Ckt Two Ckt Graphite One Ckt Two Ckt Mini-End Feed 5 1/4" 120V Mini-End Feed can be used in conjunction with a Canopy Kit for top feeding from a recessed outlet box/unimount/other (ordered separately). 18 of 10 GA. wire supplied. Silver One Ckt Left 20L100 One Ckt Right 20R100 Two Ckt Black One Ckt Left 20L200 One Ckt Right 20R200 Two Ckt White One Ckt Left 20L300 One Ckt Right 20R300 Two Ckt Graphite One Ckt Left 20L400 One Ckt Right 20R400 Two Ckt End Feed for Conduit Connector 12" 120V End Feed for Conduit Connector is used when feeding directly into the end of an End Feed. Connector supplied with 1/2 US trade size pry-out and can also be top fed directly with cable. A canopy kit is available (ordered separately). Silver One Ckt Left 20L102 One Ckt Right 20R102 Two Ckt Black One Ckt Left 20L202 One Ckt Right 20R202 Two Ckt White One Ckt Left 20L302 One Ckt Right 20R302 Two Ckt Graphite One Ckt Left 20L402 One Ckt Right 20R402 Two Ckt Straight Joiner/Feeder 12" 120V Straight Joiner/Feeder is used to mechanically and electrically couple any two lengths of busway in a straight line. Straight Joiner/Feeder can also be top fed to energize the busway from a recessed outlet box when used in conjunction with appropriate Canopy Kit or can be top fed directly with cable through 1/2 US trade size pry-out. Circuits can be field terminated or re-configured. Silver One Ckt Two Ckt Black One Ckt Two Ckt White One Ckt Two Ckt Graphite One Ckt Two Ckt
3 LSI 20 Series 30A, 120V Surface Busway Components 2 Mini-Straight Joiner 2 15/16" 120V Mini-Straight Joiner is used to mechanically and electrically couple any two lengths of busway in a straight line. Silver No Ckt One Ckt Two Ckt Black No Ckt One Ckt Two Ckt White No Ckt One Ckt Two Ckt Graphite No Ckt One Ckt Two Ckt L Joiner/Feeder 6 15/16" 120V L Joiner/Feeder is used to mechanically and electrically couple any two lengths of busway in an L right angle configuration. This L Joiner/Feeder can also be top fed to energize the busway from a recessed outlet box when used in conjunction with appropriate Canopy Kit or can be top fed directly with cable through 1/2 US trade size pry-out. Circuits can be field terminated or re-configured. Silver Inner One Ckt 20L105 20R105 Two Ckt Black Inner One Ckt 20L205 20R205 Two Ckt White Inner One Ckt 20L305 20R305 Two Ckt Graphite Inner One Ckt 20L405 20R405 Two Ckt Mini-L Joiner 3 1/2" 120V Mini-L Joiner is used to mechanically and electrically couple any two lengths of busway in an L right angle configuration. Circuits can be field terminated only. Ckt Configuration Silver Inner One Ckt 20L115 20R115 Two Ckt Black Inner One Ckt 20L215 20R215 Two Ckt White Inner One Ckt 20L315 20R315 Two Ckt Graphite Inner One Ckt 20L415 20R415 Two Ckt Mini-T Joiner 5 3/16" 120V Mini-T Joiner is used to mechanically and electrically couple any three lengths of busway in a T configuration. Internal Joiner wiring can be field modified. Note that in the one circuit version, a inner and an outer T must be ordered and must be used directly opposite each other when used in a configuration so that busbar continuity is maintained. For two circuit busway, an inner and an outer T is not necessary. Circuits can be field terminated only. Ckt Configuration Silver Inner One Ckt 20L116 20R116 Two Ckt Black Inner One Ckt 20L216 20R216 Two Ckt White Inner One Ckt 20L316 20R316 Two Ckt Graphite Inner One Ckt 20L416 20R416 Two Ckt
4 LSI 20 Series 30A, 120V Surface Busway Components 3 Mini-X Joiner 5 3/16" 120V Mini-X Joiner is used to mechanically and electrically couple any four lengths of surface busway in an X configuration. Note that in the one circuit version, a inner and an outer X must be ordered and must be used directly opposite each other when used in a configuration so that busbar continuity is maintained. For two circuit busway, an inner and an outer is not necessary. Ckt Configuration Silver Inner One Ckt 20L119 20R119 No Ckt/Mechanical Only Center One Ckt Center Two Ckt 20C119 Two Ckt Black Inner One Ckt 20L219 20R219 No Ckt/Mechanical Only Center One Ckt Center Two Ckt 20C219 Two Ckt White Inner One Ckt 20L319 20R319 No Ckt/Mechanical Only Center One Ckt Center Two Ckt 20C319 Two Ckt Graphite Inner One Ckt 20L419 20R419 No Ckt/Mechanical Only Center One Ckt Center Two Ckt 20C419 Two Ckt End Cap 1/8" 120V End Cap is used for electrically ending any straight run, individual Busway Section, or open configuration Busway Section. Silver One & Two Ckt Black One & Two Ckt White One & Two Ckt Graphite One & Two Ckt Power Outlet - 15 AMP 120V 15A NEMA 5-15R receptacle adapter provides a convenient switched and fused receptacle for power. Silver 15 Amp Black 15 Amp White 15 Amp Graphite 15 Amp /4" Power Outlet - 20 AMP 120V 20A NEMA 5-20R receptacle adapter provides a convenient switched and fused receptacle for power. Molded receptacle with 4 SJT 12/3 cable is available in black only. Silver 20 Amp Black 20 Amp White 20 Amp Graphite 20 Amp /4" Closure Cover 3'-4" 7'-4" 11'-4" Field cuttable Noryl Closure Covers are used to enclose the open face of the busway, and simply snap into place. Nominal length 4 Ft 8 Ft 12 Ft Silver Black White Graphite
5 Lighting Services Inc 2 Holt Drive Stony Point, NY Tel: Fax: CM
SURFACE TRACK (120/250V) SPECIFICATIONS
SURFACE TRACK (120/250V) SPECIFICATIONS GENERAL Lighting Track shall allow fixtures to be located anywhere along the track length. Fixtures shall be easily focused, switched, dimmed, accessorized and removed
More informationRECESSED TRACK (120V) SPECIFICATIONS
RECESSED TRACK (120V) SPECIFICATIONS GENERAL Recessed track shall be approved by the NEC for flush-mounting into ceiling or any flat surface. Recessed Track shall allow fixtures to be easily focused, switched,
More informationINTEGRID TRACK (120V) SPECIFICATIONS
INTEGRID TRACK (120V) SPECIFICATIONS GENERAL Integrid Track shall be a combination Track and main runner for mech - anically supporting suspended ceiling systems. Integrid Track shall allow fixtures to
More informationSURFACE CONTROLTrack SPECIFICATIONS
CONTROLTrack SURFACE CONTROLTrack SPECIFICATIONS GENERAL CONTROLTrack shall allow fixtures to be located anywhere along the track length. Fixtures shall be easily focused, switched, dimmed, accessorized
More informationMOUNTING SYSTEMS SPECIFICATIONS
MOUNTING SYSTEMS SPECIFICATIONS GENERAL Mounting Systems shall allow Track Systems to be fastened to or from various surfaces in a wide range of safe and approved methods. Mounting Systems shall have a
More informationGEMINI HOUSING SPECIFICATIONS
GEMINI HOUSING SPECIFICATIONS GENERAL Gemini Housing shall support Track of six foot intervals. In addition, the extra compartment shall be able to be used for a multitude of elec trical or mechanical
More informationAlphabet By Ledra Brands
700 Track 700 Track 700 Track is a 1 circuit, 20A rated, line voltage track system. Its lightweight, compact elegant design is easy to install saving on overall project costs. The track is a 120v 1-circuit
More informationTwo Circuit Trac System TRAC SECTION, JOINERS & FEEDS
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low profile, two-circuit trac sections for surface or pendant mounting. Provides two separate 20-amp circuits from a single
More informationTRAC-LITES One Circuit Trac System TRAC SECTIONS & SYSTEM COMPONENTS R Series
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Reduced-profile, single-circuit trac sections for surface or pendant mounting. Compatible with a full range of feed, connector
More informationTwo Circuit Trac System TRAC SECTION, JOINERS & FEEDS
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low-Profile, two-circuit trac sections for surface or pendant mounting. Provides two separate 20-amp circuits from a single
More informationPlug-In Raceway - Power
Plug-In Raceway - Power End Caps Vertical Elbow Page PR.1 Power Feeds Wall Clip Horizontal Elbows Plug-In Units Joiner Kit Plug-In Raceway - Power HOUSING SECTION Each Plug-In Raceway housing section consists
More informationOne Circuit Trac System TRAC SECTION, JOINERS & FEEDS T Series
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low-Profile, single-circuit trac sections for surface or pendant mounting. I-beam cross section provides added strength and
More informationOne Circuit Trac System TRAC SECTION, JOINERS & FEEDS T Series
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low-Profile, single-circuit trac sections for surface or pendant mounting. I-beam cross section provides added strength and
More informationCatalog # Project. Comments. Prepared by. L653 L =12'Nominal Actual length: 140-1/8" [3559mm] W=1 3/8" [3559mm] H =11/16" [17.5mm]
Miniature size, decorator finishes, push-in connectors, economy, all combine to make single-circuit Miniature Trac perfect for residential or commercial use. Polarized connectors and end caps are molded
More informationJuno Trac-Master Trac Lighting Systems. Comprehensive line and low voltage track systems
Juno Trac-Master Trac Lighting Systems Comprehensive line and low voltage track systems Juno Trac-Master System Safe and simple installation is what you can expect from Juno one-circuit and two-circuit
More informationNT-300 Series Single Circuit Track System & Accessories
NT-300 Series Single Circuit Track System & Accessories Type Project Catalog No. Lamp/Wattage PRODUCT DESCRIPTION Low profile, extruded aluminum track with 20-Amp rated flat, solid integral copper conductors.
More informationINSTALLATION INSTRUCTION W Track Recessed 120V Flangeless
W Track Recessed 120V Flangeless WT4-RTL, WT8-RTL, WT12-RTL SAFETY INSTRUCTION Read all of these instructions before installing the track system. Turn off power at main switch before installing or modifying
More informationProject. Comments. Prepared by. 20-1/8" [511mm] 44-1/8" [1121mm] 92-1/8" [2340mm] 140-1/8" [3559mm]
DESCRIPTION Miniature size, decorator finishes, push-in connectors, economy, all combine to make single-circuit Miniature Trac perfect for residential or commercial use. Polarized connectors and end caps
More informationSnake Bus Power Distribution
Snake Bus Power Distribution ELECTRICAL CHARACTERISTICS Rated Current 50 Amps Rated Voltage 208Y/120 or 480Y/277 Volts Frequency 50/60 Hz Conditional Short Circuit Rating (Protection device) 16 KA Conductor
More informationPOWERBUS 225 Busway and Plug-In Units
Busway and Plug-In Units Class 5600 CONTENTS Schneider Electric Brands Description Page Product Descriptions.................................................. 3 POWERBUS 225 Busway System.....................................
More informationBasis Hardware. Translite Low Voltage Track System
conductor Basis Hardware Consult the factory for estimates on curved runs. Bendable at factory up to an 18" radius. Basis Track The conductors are extruded aluminum. Square tube construction maximizes
More information4 ft 8 ft 12 ft. straight factory bent. End Cap for Recessed Track Mount for Bruck s GEO track. Offered in white, matte silver or black.
Fixture : Geo Track Geo Track GEO Track is a 2 circuit line voltage track that is surface mounted or recessed. GEO Track is lightweight, compact elegant design that is easy to install saving on overall
More informationIMPORTANT SAFETY INSTRUCTIONS
INSTALLATION INSTRUCTIONS READ ALL OF THESE INSTALLATION INSTRUCTIONS BEFORE INSTALLING THE TRACK SYSTEM SAVE THESE INSTRUCTIONS AND REFER TO THEM WHEN ADDITIONS TO OR CHANGES IN THE TRACK CONFIGURATION
More informationRELOC Modular Wiring Specialty Lighting and Power Systems
RELOC Modular Wiring Specialty Lighting and Power Systems Family FileName Description RevisionDate Access Floor Wiring DB DB Distribution Box 10/15/1999 FM FMI3 Floor Module 03/15/2002 Power Wiring System
More informationSelection and Application Guide. busway system. Cost-effective Power Distribution Compact Design
Selection and Application Guide busway system XJ-L Cost-effective Power Distribution Compact Design Specifications New for 2007..400A XJ-L Busway XJ-L Busway is available up to 400A. First introduced in
More informationAustralian Wiring Instructions:
Australian Wiring Instructions: Generator/Switch Wiring: Remove the generator controller fascia and identify wire #44 going to the circuit breaker in the external connection box, this wire is the active
More informationSECTION LOW VOLTAGE DISTRIBUTION EQUIPMENT
SECTION 16400 LOW VOLTAGE DISTRIBUTION EQUIPMENT A. General 1. The University does not accept Series-Rated equipment for power distribution switchboards, distribution panels and branch circuit panelboards.
More informationCOMPACT BUSWAY 40 & 60 AMP HOUSING
40 & 60 AMP HOUSING B40 & HOUSING Each Track Busway housing section consists of an extruded aluminum housing with an insulated strip containing copper conductors mounted on the top interior wall. The aluminum
More informationINTELLIGENT MEDIUM POWERBAR impb
INTELLIGENT MEDIUM POWERBAR impb INTELLIGENT MEDIUM POWERBAR impb E+I Engineering s Intelligent Medium Powerbar (impb) is a 600 Volt encased track busduct. The range is available in two bar configurations
More informationPow-R-Flex low ampere busway
Pow-R-Flex low ampere busway Commercial Industrial Telecommunications Data centers Research Light manufacturing Pow-R-Flex low ampere busway Pow-R-Flex low ampere busway Pow-R-Flex low ampere busway provides
More informationELECTRO-MECH SCOREBOARD CO.
ELECTRO-MECH SCOREBOARD CO. MM-338 FOOTBALL SCOREBOARD OWNER S HANDBOOK Thank you for choosing an Electro-Mech Scoreboard for your athletic complex. We are confident that your new scoreboard will give
More informationPDI PowerWave 2 Bus System
1 GENERAL 1.1 Summary This specification covers the electrical characteristics and general requirements for a continuous opening, low voltage, vertical or horizontal power busway distribution system. System
More informationOUTDOOR TRACK. LABELS Assembled in America
OUTDOOR TRACK DESIGNED BY GREGORY KAY PATENT-PENDING FEATURES & BENEFITS Offers the flexibility of 2-Circuit Track Lighting in an exterior environment Uses 12VAC low voltage wiring without the need for
More informationProduct Selection Guide
Selection Guide Selection Guide TABLE OF CONTENTS T1 Series: 40, 50 & 60 Amps...1.1-1.29 T2 Series: 60, 100 Amps...2.1-2.44 T3 Series: 100 & 225 Amps...3.1-3.37 T5 Series: 250, 400 & 800 Amps...4.1-4.51
More informationElectrical Applications. Metal Framing & Cable Tray Superstrut Metal Framing System. Column A. Design Data: Materials: Column B
Electrical Raceway Series 800 Surface Raceway and Lighting Systems Superstrut channel together with snap-in closure strip is listed by Underwriters Laboratories as a surface metal raceway. Other accessories
More informationPut the Power in Your Hands
Put the Power in Your Hands StarlineTrack Busway... STARLINE Track Busway is quickly becoming the industry standard for power distribution systems. Introduced in 1988, this innovative system is a modular,
More informationPLUGS AND RECEPTACLES: NEC/CEC HAZARDOUS LOCATION
Explosionproof, Dust-Ignitionproof With Disconnect Switch or Circuit Breaker. Weatherproof Spring Cover. 600 Vac Max. 250 Vdc Max. Applications Locations where receptacles are used with stationary or portable
More informationBUSWAY Low Voltage (Pow-R-Flex)
BUSWAY LOW VOLTAGE (POW-R-FLEX) PART 1 GENERAL 1.01 1.02 SCOPE The Contractor shall furnish and install the busway system including all necessary fittings, hangers and accessories as specified herein and
More informationKAP A Plug-in Busbar Distribution System IEC ME 04
EAE Elektrik A.Ş. Akcaburgaz Mahallesi, 119. Sokak, No:1 341 Esenyurt-Istanbul-TURKEY Tel: +9 (212) 866 2 Fax: +9 (212) 886 24 2 www.eae.com.tr 2-32 A Lighting Busbar System Y A N D EN V E IT AL s ISO
More informationMulti-Pak Group Control
Multi-Pak Grouping.1 Product....................................... Application.................................... Features Enclosures........................................... V-T-2 V-T-2 V-T-2 Feeder
More informationHALO. Track Lighting. Metal Halide + Track = STASIS. Stasis Metal Halide
HALO Metal Halide + Track = STASIS Track Lighting Stasis Metal Halide Stasis Features Stasis Ceramic Metal Halide = The Sharp NEW Reliable Workhorse Halo once again sets the new standard in Ceramic Metal
More informationLumeLEX 2084 SERIES INSTALLATION INSTRUCTIONS THIS SHEET CONTAINS IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
LumeLEX 2084 SERIES INSTALLATION INSTRUCTIONS Important THIS SHEET CONTAINS IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS. Warning This product must be installed in accordance with National Electrical
More informationSection SWITCHBOARDS. Introduction. Part 1 - General. Related Work
Section 16435 - SWITCHBOARDS Introduction Part 1 - General Related Work Section 16070 Seismic Anchorage and Restraint Section 16075 Electrical Identification Section 16080 Power Distribution Acceptance
More informationMARWELL CORPORATION Manufacturer of UL Listed Meter Socket Adapters
MARWELL CORPORATION WWW.MARWELLCORP.COM PO BOX 139 MENTONE CA 92359 (909) 79-192 FAX (909) 79-0250 Red Section Single Phase A-Base to S-Base Adapters, 100 ABase Conversion Adapter, 2000 Series, 2500 Series,
More informationOperation Manual Image
Operation Manual Image 82, 42, 22 4/14/03 Image 82 8 x 4ft lamps Manual on/off switching control Switches 2 lamps at a time Image 42 4 x 4ft lamps Manual on/off switching control Switches 2 lamps at a
More informationCONTENTS. This Product is Certified by CANADIAN STANDARDS ASSOCIATION and Bears the Mark:
This Product is Listed by UNDERWRITERS LABORATORIES INC. and Bears the Mark: This Product is Certified by CANADIAN STANDARDS ASSOCIATION and Bears the Mark: SLATER SCD Installation Instructions For Self-Contained
More informationDBR Receptacle Class II, Division 1 and 2, Groups F, G Class III NEMA 3, 3R, 4, 4X, 9FG
EBR/DBR 30, 60, 100 and 150 Amp Series Receptacles With Disconnect Switch or Circuit Breaker. Weatherproof Spring Cover. Explosionproof, Dust-Ignitionproof 600 Vac Max. 250 Vdc Max. EBR Receptacle Class
More informationData Bulletin. Ground-Censor Ground-Fault Protection System Type GC Class 931
Data Bulletin 0931DB0101 July 2001 Cedar Rapids, IA, USA Ground-Censor Ground-Fault Protection System Type GC Class 931 09313063 GT Sensor Shunt Trip of Circuit Interrupter Window Area for Conductors GC
More informationDesign Standard. Purpose: Design Standard:
Design Standard Purpose: This design standard has the purpose of creating a consistent application of motor-control centers throughout the East Side Union High School District, therefore achieving a standard
More informationKAM A Lighting Busbar System KAP A Plug-in Busbar Distribution System
25-32 A Lighting Busbar System 4-63 A Plug-in Busbar Distribution System / CONTENTS E-LINE / General 2-3 System 4 Technical Characteristics 5 Standard Busbars 6 Standard Elements 7 Tap Off Plugs 8 Standard
More informationElectrak power track underfloor power distribution systems
4 www.electrak.co.uk Electrak power track underfloor power distribution systems Tel: 01207 503400 Fax: 01207 501799 Email: sales@electrak.co.uk Because of our policy of continuous improvement, Electrak
More informationTrac 12/25 and Trac 12 Systems. Two uniquely qualified systems to accept Trac 12 Fixtures
Trac 12/25 and Trac 12 Systems Two uniquely qualified systems to accept Trac 12 Fixtures Juno Trac 12/25 and Trac 12 System Comparisons The original Trac 12 and the rigid profile, higher amperage Trac
More informationConnectors and Insulators
58 Connectors and Insulators Conne c t o r s a n d I n s u l a t o r s SECTION INDEX As the nuts and bolts of a marine electrical system, connectors perform important functions on board. By keeping current
More informationRecreational Vehicle Park Electrical Products & Accessories
Recreational Vehicle Park Electrical Products & Accessories 2 MILBANK OVERVIEW Milbank Overview Energy At Work since 1927 Milbank designs and manufactures electrical solutions that move and manage power
More informationMuseum Alkmaar - Alkmaar, Netherlands
Museum Alkmaar - Alkmaar, Netherlands 270 Lytespan 1 283 Lytebeam 287 Universal Suspensions TRACK 292 Nanotrack 1 267 TRACK Strellson - Moscow, Russia Construction: Total Max Load: Finish: Extruded aluminium
More information100-Ampere Busway. Effective November 2005 New Information. Elbow, Busway and Cable Tap Box. Technical Data TD E
100-Ampere Busway Technical Data TD01701002E Effective November 2005 New Information Elbow, Busway and Cable Tap Box Contents General Information.............................. 2 Connections...............................
More informationMECKLENBURG COUNTY. Land Use and Environmental Service Agency Code Enforcement 2/8/12 ELECTRICAL CONSISTENCY MEETING. Code Consistency Questions
MECKLENBURG COUNTY Land Use and Environmental Service Agency Code Enforcement 2/8/12 ELECTRICAL CONSISTENCY MEETING Code Consistency Questions 1. I am inspecting a building addition. They have a 480V to
More informationBSS610 GENERAL INFORMATION - FIXTURE HOUSING
BSS610 GENERAL INFORMATION - FIXTURE HOUSING 2 wide multi-axis direct LED luminaire system Project: Type: FEATURES Create an endless variety of multi-directional fixture runs and geometric shapes with
More informationConduit and Wire. Wire and Cable Whips. Bus Duct, Cable Trays, Overhead or Under Floor Raceways, Strut or Channel Systems
Conduit and Wire Must be scrapped whenever reconfiguration of the electrical layout is needed. Many runs may be needed for applications with a high volume or high density of electrical loads. It is labor
More informationPretest Module 24 Three-phase Service Entrance
Pretest Module 24 Three-phase Service Entrance 1. What is the most widely used three-phase service entrance system? 2. What are the three most common voltage combinations for three-phase, four-wire systems?
More informationJuno Trac-Lites System A complete and customizable track system with an array of features
Juno Trac-Lites System A complete and customizable track system with an array of features Juno Trac-Lites System Track sections are constructed of extruded aluminum and offer a low 1/2" profile that unobtrusively
More informationCABINET - INSTRUMENT TRANSFORMER Indoor - Outdoor, 480 Volt Maximum 1200, 1600, 2000 Ampere
Printed from NIPSCO.com 04-01-17 PAGE 1 OF 6 USE: 1. For commercial and industrial installation, purchased and installed by the customer. 2. To enclose 600 volt insulation class instrument transformers
More informationWARNING NORDIC ALUMINIUM LIGHTING TRACK SYSTEMS
WARNING NORDIC ALUMINIUM LIGHTING TRACK SYSTEMS DO NOT solder connectors as this will prohibit the adapters circuit switch to move freely from circuit to circuit. Nordic Aluminium track adapters and accessories
More informationNEC DBR Receptacle: Class II, Division 1 and 2, Groups F, G Class III NEMA 3, 3R, 4, 4X, 9FG
EBR/DBR 30, 60, 100 and 150 Amp Series Receptacles With Disconnect Switch or Circuit Breaker. Weatherproof Spring Cover. Explosionproof, Dust-Ignitionproof 600 Vac Max. 250 Vdc Max. NEC EBR Receptacle:
More informationINSTRUCTIONS FOR THE RELIANCE CONTROLS ARM SERIES AUTOMATIC TRANSFER SWITCH
INSTRUCTIONS FOR THE RELIANCE CONTROLS ARM SERIES AUTOMATIC TRANSFER SWITCH THE RELIANCE CONTROLS ARM SERIES AUTOMATIC TRANSFER SWITCH IS NOT FOR "DO-IT-YOURSELF" INSTALLATION. It must be installed by
More informationQuik-Spec Coordination Panelboard Specifications
Quik-Spec Coordination Panelboard Specifications 30A - 400A Fusible Panelboards SECTION 26 24 XX (This Specification references CSI MasterFormat 2004) FUSIBLE BRANCH CIRCUIT PANELBOARDS PART 1 1.01 SUMMARY
More informationLUM SERIES-PLED w/ POLE RATED FOR 100MPH SHAFT
EXPEDITED AVAILABILITY LUM SERIES-PLED w/ POLE RATED FOR 100MPH SHAFT PROJECT NAME: FIXTURE TYPE: FIXTURE HOUSING Heavy cast low copper aluminum assembly (A360 alloy,
More informationGeartray mounts onto extrusion with 1/4 turn hardware. Lamp support ring. MR11 Lamp 50W max. (supplied by others) End View Side View Bottom View
MR11 Downlights MR11 Fixed Downlight Ordering Code: MR11 Supplied with clear glass lens. Available for all M60 extruded forms. Fixture will accept up to 3 accessories. 50W MR11 Lamps (by others) must be
More information31-SDMS-02 REV. 01 SPECIFICATIONS FOR
31-SDMS-02 REV. 01 SPECIFICATIONS FOR LOW VOLTAGE DISTRIBUTION PILLAR This specification is property of SEC and subject to change or modification without any notice C O N T E N T S S. NO. D E S C R I P
More informationMonoLine Line Voltage Flexible Track SYSTEM COMPONENTS
Project: Fixture Type: Location: Contact/Phone: MLFT MonoLine 4 Foot Rail Section (Includes Two MLE) Hand bendable aluminum core track. Track may be bent to a minimum radius of 18. Rated 20 amps at 120
More informationMichigan State University Construction Standards SECONDARY UNIT SUBSTATIONS PAGE
PAGE 261116-1 SECTION 261116 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationUV8 & UV90 SERIES INSTALLATION INSTRUCTIONS
UV8 & UV90 SERIES INSTALLATION INSTRUCTIONS Important THIS SHEET CONTAINS IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS. Warning This product must be installed in accordance with National Electrical
More informationTEMPORARY ELECTRIC WIRING FOR CARNIVALS, CONVENTIONS, EXHIBITIONS, FAIRS AND SIMILAR USES
INFORMATION BULLETIN / PUBLIC - ELECTRICAL CODE REFERENCE NO.: LAMC 93.0230 Effective: 3-24-69 DOCUMENT NO. P/EC 2002-006 Revised: 11-17-00 Previously Issued As: RGA #7-69 TEMPORARY ELECTRIC WIRING FOR
More informationcircuit protection & wiring accessories
circuit protection & wiring accessories P1 P BLOCKS & BUSBARS TERMINAL BLOCKS P2 P3 CONNECTORS, TERMINALS & FUSES P4 CLAMPS, CLEATS, CLIPS & TIES P5 P1 circuit protection & wiring accessories ACCESSORIES
More informationSECTION PANELBOARDS
SECTION 16470 PANELBOARDS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. The general provisions of the contract including General and Special Conditions and General Requirements shall apply to all work under
More informationSAVE THESE INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be
More informationPLASTIC FOLDING ARM KIT This kit is designed for the 1600 model barrier gate operators only. Recommended for low headroom applications.
PLASTIC FOLDING ARM KIT This kit is designed for the 600 model barrier gate operators only. Recommended for low headroom applications. Kit Includes: Plastic Arms Attachment Assembly Clamp Locking Turnbuckle
More informationUnderfloor to desk 231
Technical information Underfloor to desk 231 Series 507 Powertrack Series 507 Powertrack is an underfloor busbar system rated at 63Amp maximum. It is available in Standard or CE (Clean Earth) versions.
More informationBusway Construction. Bus Bars
Busway Construction Bus Bars A better understanding of what busway is can be gained by examining its construction. A typical Siemens Sentron busway section has three or four formed aluminum or copper bars
More information2018 Consultant s Handbook Division 26 Electrical 2413 Switchboards
1 General 1.1 Switchboards shall be U.L. listed and labeled. 1.2 Each switchboard shall have its own main disconnecting means unless it is located in the same room as its source of origin. In most cases
More informationELECTRO-MECH SCOREBOARD CO.
ELECTRO-MECH SCOREBOARD CO. MP-140 BASEBALL SCOREBOARD OWNER S HANDBOOK Thank you for choosing an Electro-Mech Scoreboard for your athletic complex. We are confident that your new scoreboard will give
More informationApplication guide. Tmax Link OEM UL 891 Switchboard Program
Application guide Tmax Link OEM UL 891 Switchboard Program 04 Tmax Link Overview 04 Standards 04 UL File Extension Process Overview 05 Electrical Data 05 Technical Data 05 Ambient Conditions 08 Circuit
More informationFACT SHEET Standard: Electrical Safety
What is a Ground Fault Circuit Interrupter? FACT SHEET The ground-fault circuit interrupter, or GFCI, is a fast-acting circuit breaker designed to shut off electric power in the event of a ground-fault
More informationPLUGS AND RECEPTACLES: NEC/CEC HAZARDOUS LOCATION
DBR 30, 60, 100 and 150 Amp Series Receptacles Explosionproof, Dust-Ignitionproof With Disconnect Switch or Circuit Breaker. Weatherproof Spring Cover. 600 Vac Max. 250 Vdc Max. Applications Locations
More informationA powerful way to manage your power distribution challenges. I Power Distribution Blocks
I Power Distribution Blocks A powerful way to manage your power distribution challenges. Your problem: You re facing the enormously complex wiring requirements of an automated manufacturing facility. Or
More informationPower Distribution Blocks
ower istribution Blocks A OWERFUL WAY TO MANAGE YOUR OWER ISTRIBUTION CHALLENGES Your problem: You re facing the enormously complex wiring requirements of an automated manufacturing facility. Or the compatibility
More informationCHAPTER V RESIDENTIAL WIRING
CHAPTER V RESIDENTIAL WIRING 5.1. THE SERVICE ENTRANCE Buildings and other structures receive the electrical energy through the service entrance. In residential wiring, the electric company supply this
More informationINSTRUCTIONS FOR THE RELIANCE Fast/Tran TM ARL0909 & ARL0909R
INSTRUCTIONS FOR THE RELIANCE Fast/Tran TM ARL0909 & ARL0909R THE RELIANCE Fast/Tran IS NOT FOR "DO-IT-YOURSELF" INSTALLATION. It must be installed by a qualified electrician thoroughly familiar with all
More informationElegance Electrician s Installation Guide
Elegance Electrician s Installation Guide CentraLite Systems, Inc. 6420 Wall St. Mobile, AL 36695 Phone: 877-466-5483 Fax: 251-607-9119 2003-2005 CentraLite Systems, Inc. Revised 10/20/2005 ELECTRICIAN
More informationI power distribution. Blocks. challenges. Finger-Safe / FSPDB Series...I2. MPDB Open-Style PDBs... I4. MPDB62-MPDB63 (Mini) Open-Style PDBs...
Power Distribution Blocks I A powerful way to manage your power distribution challenges. Your problem: You re facing the enormously complex wiring requirements of an automated manufacturing facility. Or
More informationConnectors and Insulators
52 Connectors and Insulators Terminal Blocks Connectors and Insulators As the nuts and bolts of a marine electrical system, connectors perform important functions on board. By keeping current flowing efficiently,
More information2 CIRCUIT TRACK. Notes: INSTALLATION PROFILE SURFACE TRACK COLOR. Page 1/9. Date :12/06/17 Rev.02 WHITE POWDER COAT SILVER ANODIZED
2 CIRCUIT TRACK SURFACE TRACK COLOR INSTALLATION PROFILE WHITE POWDER COAT SILVER ANODIZED PLASTER FLANGE RECESSED VISIBLE FLANGE RECESSED BLACK ANODIZED Page 1/9 SURFACE TRACK SYSTEM : compose your system
More informationElectrical Design/Build Guide
2017 Electrical Design/Build Guide Based on the 2017 National Electrical Code Copyright Durand & Associates 1986-2016 60 C Copper Ampacity 4 - Wire Fill - (Non-Current Carrying Neutral) 4 or 5 - Parallel
More informationUniversity of California, San Diego Cal (IT) 2 Technical Assignment #2. Brian Smith
University of California, San Diego Cal (IT) 2 Technical Assignment #2 Brian Smith Advisor: Dr. Moeck 31 October 2005 Brian Smith Lighting/Electrical Option University of California, San Diego Cal (IT)
More informationLB - LIGHTING BUSWAY 25-40A
16 LB - LIGHTING BUSWAY 25-40A LIGHTING BUSWAY SECTION CONTENTS 18 General features 24 Trunking components: 2 and 4 conductors elements 28 Trunking components: 6 conductors elements 30 Plugs 33 Fixing
More informationLighthouse Power Pedestals,
Lighthouse Power Pedestal One of our most popular units, the all-purpose Lighthouse pedestal has a wide range of features. With units in service around the world, this stylish power pedestal is recognized
More informationFIRE CLASSIFIED FLOOR BOXES Omnibox Series Floor Boxes
FIRE CLASSIFIED Omnibox Series Floor Boxes OmniBox Series Floor Boxes Solid Brass Cover Plate Flanges Ordering Information 817B One-Gang Brass Combination adapters and Wiremold CM Series 4 3/4" 880CS1-1
More informationRunning Magnet 2.0 Suspension Down High-tech LED lighting system for interior architecture
Description Fun with magnets and light. Simultaneously graphic and subtle, the Running Magnet is flexible, precise, and as creative as you. It is track lighting redesigned and elegantly refined. Light
More informationClean Air Products Straight Thru Standard Profile Single Door Air Shower Purchase Specification
Clean Air Products Straight Thru Standard Profile Single Door Air Shower Purchase Specification 1. Purpose This specification describes a single person air shower (aka decontamination shower) used to remove
More informationA. Submit manufacturer's literature and technical data before starting work.
SECTION 16425 SWITCHBOARD PART 1 GENERAL 1.01 SUMMARY A. Related Section: 1. 16450 - Grounding. 1.02 SUBMITTALS A. Submit manufacturer's literature and technical data before starting work. B. Submit Shop
More information