Index. To contact Regin Company information News Lon-News. Electronic Electro mechanical. 1-phase 230 V, 2-phase 400 V, 3-phase 400 V Step controllers

Transcription

1 Index Index General information Thermostats Triac controllers Controllers Temperature sensors Humidity Pressure Transmitters Detectors Valve actuators & Valves Damper actuators Accessories To contact Regin Company information News Lon-News Electronic Electro mechanical 1-phase 230 V, 2-phase 400 V, 3-phase 400 V Step controllers Analogue and Digital for... Air handling, Heating Systems and Zone Control NTC PT100/PT1000 Temperature transmitters Humidistats Humidity sensors Pressure switches Pressure transmitters CO 2 -sensors Air-Velocity sensors Smoke detectors Presence detectors Alarm units Actuators: Thermal, 3-point and V Valves: kv 0, On/Off V, with or without spring return Instruments Manometers Rotation sentinels Chapter 0 Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5 Chapter 6 Chapter 7 Chapter 8 Chapter 9 Chapter 10 Chapter 11 Contents With references to the main catalogue and product groups Chapter (0) Chapter 0 Page 1

2 The Regin Group The Regin Group Our Market The companies within the Regin Group have a long experience of international business and projects. Our major market is Europe with sales offices in Sweden and France, and a part-ownership in Germany. In countries such as UK, Norway, Russia, Slovakia, and others, we have close cooperation with Qualified Distributors. In all, you find our products and systems in more than forty countries all over the world. Product Specialist The history of Regin goes back to 1947, when the first humidistats developed by Regin were presented. Today, the Regin range extends from sensors to controllers, valves and actuators. Regin also represents complementary products of leading brands. Here OEM manufacturers, integrators and installers have full access to high quality products, for powerful indoor climate control. Regin is certified according to ISO Regin is continuously developing new products, especially with LonWorks techniques. As a LonMark partner, Regin also takes an active role in the development of the LON technique. Value Added Valves Osby Armatur (OAB) has a valve manufacturing tradition that goes back to the beginning of the 20th century. The business mission Valves with added values, is proved by the fact that the OAB-valves are well known for their high quality and superior flow characteristics. They also have a well-proven resistance to high media temperatures. The valves are widely used in heating systems, cooling systems, cold and warm tap water systems and in irrigation systems. The wide range of 2- and 3-way valves is available with a complete range of actuators. Asia Division Our company in Singapore, Regin Asia Pacific, covers a market area from China in the north to Australia in the south. Regin Asia Pacific co-operates with a network of capable integrators, agencies and distributors who offer the complete Regin product range. Regin Asia Pacific also develop their own products that are more adapted to a warmer and damper climate. System Integration In the year 2002 Exomatic was incorporated in the Regin Group with the new name, Regin Exomatic. Regin Exomatic offers solutions for open, scalable control systems including integration and communication tools. The key product is EXOflex, a freely programmable controller with replaceable I/O-units (so called PIFAs). Systems can be found in a large number of building installations worldwide. The versatility has made EXOflex successful in applications such as water and sewage systems, district heating systems, electricity and gas distribution systems. Other areas are industrial process control and automated manufacturing. Service and technical competence are provided by Certified System Integrators. Regin Exomatic is certified according to ISO Their own laboratory tests, plus external CE-tests, guarantee the highest quality. Allmänt Page 2 Chapter (0)

3 General information and directions General information and directions Mini catalogue Brief technical information about each product in the Regin product range. Web Here you will find the latest news and information about our products. Main catalogue Leaflets on our products with technical specifications and wiring diagrams. Overview brochures Brochures that will give an overview of our different product groups with descriptions of the features and advantages of the products. Instructions Instructions with wiring and mounting directions are included with our products. You can also get them from our website or call us and we will provide further copies for you. Commissioning Brief instructions on the commissioning of the Aqualine controllers. You will find information on how various parameters affect the control and two different commissioning methods. Exhibitions where you can meet us in 2004 Mostra Convegno, Milan The biggest Italian and Southern European HVAC exhibition / Nordbygg, Stockholm Northern Europe s most important meeting place for the building- and HVAC- industries / Light & Building, Frankfurt The most important central European exhibition for the HVAC industry / (0) Chapter 0 Page 3

4 News News Corrigo E A new series of digital controllers more flexible than ever. Here are some of the most important characteristics. Input for CO 2 -sensor Air flow presentation Pressure sensor inputs DX-cooling in up to three steps Step control of electric heating High/low priority alarm outputs Corrigo-DSP Further information on page Further information on page External configuration tool intended for Corrigo E-series. If you want to mount the controller in a cabinet but want to control it from the outside, you can use a wall- or front mounted configuration tool E-DSP ALD24VAV-LON New zone-controller for controlling VAV-applications. It has a large display and is intended for wall-mounting. The controller has an input for e.g. a carbon dioxide sensor. ALD24VAV- LON has two V outputs. PULSER-DSP Electronic zone-heating controller with display for room mounting. The controller is intended to control electric batteries, electric radiators etc. PULSER-DSP has built-in sensor and input for external sensor. Further information on page 32 Further information on page 17 TM1-IT/D Thermostat for controlling ice - melting systems. The controller can control a heating cable mounted in gutters, outdoor stairs etc. HR-S New humidistat for room-mounting with a synthetic element as humidity sensor. The humidistat gives accurate measuring to a low cost. Further information on page 11 Further information on page 49 Page 4 Chapter (0)

5 Leading Lon-solutions Leading Lon-solutions Corrigo E Corrigo E can be equipped with communication ports for e.g. Lon- or EXOLine-networks. This makes it possible to integrate the controller in existing networks. This also opens the possibility for supervision via LAN or via the web. Corrigo C Controller unit for temperature, humidity and pressure control in airhandling systems. LonWorks Further information on page Further information on page 28 Corrigo L A controller intended for simpler air handling applications. Just like the Corrigo C-series it is simple to install and use. LonWorks Corrigo R Room controller intended for installations with Lon-communication. Further information on page 26 Further information on page 26 ALD24VAV-LON New zone-controller for controlling VAV-applications. It has a large display and is intended for wall-mounting. The controller has an input for e.g. a carbon dioxide sensor. ALD24VAV- LON has two V outputs. PULSER-HC-LON LonWorks LonWorks Further information on page 32 Further information on page 17 Zone controller for controlling electric heating via a triac output, or control of heating/cooling in sequence, with for example 24 V thermal actuators. DMD-LON Differential pressure transmitter for measuring over, under and differential pressure in air and neutral gases. LonWorks Further information on page (0) Chapter 0 Page 5

6 "Concealed automatics "Concealed automatics Our future home will be an advanced IT-system. The room temperature sensor, as well as the HVAC controller, will be intelligent devices that communicate. The information that flows in the building's veins, the fieldbus, is used to evaluate a series of complex tasks and make decisions about how to control the indoor climate. TVs, computers, cellular-phones and PDAs are our new user interfaces. The Internet will help you to control your system anywhere and anytime. Added value and lower costs The automated home will provide added value for the occupants and increased profit for the real-estate owner, energy supplier and a long row of service providers. A new energy billing system becomes fairer by basing the energy-bill on the degree of comfort the customer chooses. By enabling load controlling of subscriber equipment, the sudden bursts of energydemand can be minimized. The subscriber should then be rewarded for the small degradation in comfort. Why not let the insurance company offer services that help to increase customer safety. The local security service provider could easily monitor the subscriber's household equipment and prevent accidents from happening or stop burglars in time. The real-estate owner could, by offering these services and more, attract new customers and make people move to areas they normally would not move to. A brand new IT infrastructure will enable the real-estate companies to increase profitability by coordinating the various benefits inherent in the system. Endless possibilities lie ahead for the new intelligent IT-home. All services have one common factor, more comfort at a lower price. Regin will help you build this new IT-world of building automation. How is this possible? Systems based on open standards provide a higher degree of freedom. The customer will not be tied to a single supplier of equipment or of services. Open standards also facilitate the possibility to connect many different systems, both geographically as well as functionally. In addition to this, a common supervisory platform provides for interconnection of top-level software and results in a better view of the process. LonWorks IP Today we may use LonWorks IP to enable all of the above. The system will be open, flexible and compatible with the 21st century's major technological wonder, the Internet. A company WAN (LAN) connected to the Internet is the best IP backbone. Should your company lack a broad-band connection to the Internet, LonWorks IP will also let you dial-up your networks and you can even mix different connection types in the same network. No new software will be necessary. Use your standard web-browser (Internet Explorer, Netscape and so on). If a new feature is added to the system it will be accessible to you at an instant. No updates needed just reload the web page. Forget about tricky installations and computer reboots. Regin will supply you with a complete series of products for the new IT-home. Our devices rely on the only open standard on the market, LonWorks. Together with other major suppliers of HVAC equipment, we are convinced that there is only one path ahead, namely LonWorks in conjunction with IP. Many large manufacturers of switches and other equipment for Internet communication supply bridges between the LonWorks fieldbus and the IP backbone. Let Regin help you get connected, today! Page 6 Chapter (0)

7 Lon-works Lon-works Lon-Works communication REGIN have started developing products with LonWorks as the medium of communication. In order to facilitate as far as possible for the customer we have chosen, wherever feasible, to follow existing standards. All files and documents required for getting the system up and running can be downloaded from our net website. In order to increase awareness and spread knowledge of Lon technology, Regin together with a number of other partners has started a training programme for LonWorks combined with indoor climate control. The technique LonWorks is a fieldbus system applicable to a broad variety of applications. The technology has been developed by Echelon who also supplies some of the components necessary for development and communication. The fundamentals of LonWorks lie in the protocol, LonTalk, which is implemented in a microprocessor, called the Neuron-chip. The Neuron is designed for the handling of I/O-tasks and communication. Each LonWorks-node consists of a Neuron and a transceiver and the Neuron is actually three microprocessors pipelined into one chip. The separate processors handle communication, fault-handling and I/O. The Neuron hold a firmware that works as an operating system co-ordinating the three processors' work. One of the benefits gained from the firmware is that it handles all the communicational tasks and therefore abstracts that layer from the developer. This means that the application becomes independent of the communicational media. A LonWorks-network is made up of the LonWorks-nodes and a database describing the configuration and connections between the nodes. This database is called the NSS and is available as an embedded device, called the NSS-10 and as a software component for Windows95/98/NT/2000. The NSS is interacted upon by commands to the NSS-10 or through the LCA-framework. LCA stands for LonWorks Component Architecture and it provides an interface to the NSS for the Windows developer to use. The LCA- Server is an Active X-server that may be used with most of the programming languages for the Windows-environment. To enable old software packages to be able to access the LonWorks-network a DDE-Server for the LNS (NSS+LCA) has been developed. This server utilises the Dynamic Data Exchange standard for exchanging data between applications in the Windows-environment. InTouch, LabView, MS Excel and other software packages support the DDEstandard. The ventilation and heating are both controlled by the accesscontrol system that will adjust the controllers according to the presence in the building. The access control system also has the ability to identify which offices are occupied and uses that information to control the separate room-controllers. To use electric power even more efficiently all separate office-spaces are equipped with presence detectors that control the lighting. The ventilation and heating controllers share the outdoor temperature sensor and the entire system has a unified user-interface presented to the operators. A system operator may log in using the same userinterface as the operators but will be able through a web-based access control mechanism to adjust parameters that would not be accessible to the ordinary operators. The actual connection between the operators and the web-server may be through a LAN, the Internet or a dial-up connection. There are more than 5 million LonWorks devices operating around the world today. Roughly 4000 companies design their products for use in LonWorks-networks. The powerful standardisation organisations, ANSI and EIA have both adopted LonWorks as a standard for control networks. LonWorks goes under the official code ANSI/EIA (0) Chapter 0 Page 7

8 Page 8 Chapter (0)

9 Thermostats Regin has a broad range of electronic and electro-mechanical thermostats. The electronic thermostats have been developed by Regin. Electronic thermostats Electro mechanical thermostats 13 Accessories 14 Sensors for electronic thermostats Chapter Chapter 1 Page 9

10 Thermostats, Electronic Control of underfloor heating For flush-mounting Thermostats, Electronic FL1G "Floorigo" is an electronic one-stage thermostat for flush-mounting. Can be used with either internal or external sensor and minimum or maximum limitation feature. Is supplied with floor sensor. Output Setpoint Hysteresis Minimum limitation Maximum limitation Night setback Floor sensor 13 A, 230 V AC, Closing relay 230 V AC C 0.4 K C C 5 K IP C Wall thermostat 1-stage including floor sensor (cable length 3 m) FL1G Room thermostat 1-stage Electronic thermostat for wall mounting. Can be set for heating or cooling. Built-in sensor and input for external sensor. Output 16 A 230 V AC changeover relay 230 V AC +/-10% Setpoint C Hysteresis 1K IP30 Electronic thermostat TM1-P Room thermostat 1-stage, cooling Electronic 1-stage thermostat intended for control of thermal actuators. Output 2 A, 24 V AC, (triac) 24 V AC +/-10% Setpoint C Hysteresis 0.3 K Indication Green LED (on the cover) IP30 Electronic thermostat, cooling, TM1-24C Room thermosat 2-stage, heating, cooling Electronic 2-stage thermostat intended for control of thermal actuators. One output for cooling and one output for heating. Output Two,3 A, 24 V AC, (triac) 24 V AC Setpoint C Hysteresis 0.3 K Step differential 1.3 K Sensor input One (1) Indication Red LED (heating), green LED (cooling) IP30 Electronic thermostat, 2-stage, heating/cooling in sequence TM2-24HC Page 10 Chapter

11 . Thermostats, Electronic Thermostat 1-stage DIN-mounting Electronic thermostat for heating or cooling. Adjustable night setback via external clock. Several thermostats can be connected to the same sensor. Output One, 16 A, 250 V AC closing relay 24 V AC or 230 V AC +/-10% Setpoint C, ( *1 Hysteresis K Night setback K Sensor inputs One (1) IP20 Electronic thermostat, supply voltage 230 V AC TM1N/D Electronic thermostat, supply voltage 24 V AC TM1N-24/D Thermostat 2-stage DIN-mounting A thermostat with two relay outputs, one for heating and one for cooling in sequence. Outputs Two, 10 A, 250 V AC, closing relays 24 V AC Setpoint C, ( *1 Hysteresis 0.5 K...5 K Step differential K Sensor input One (1) IP20 Electronic 2-stage thermostat, heating/cooling ( C) TM2-24/D Electronic 2-stage thermostat, heating/cooling ( C) TM250-24/D Ice-thermostat DIN-mounting Thermostat for controlling ice -melting systems. The thermostat can control a heating cable mounted in gutters, outdoor stairs etc. The thermostat has a built-in timer for switch-off. Output Setpoint (low) Setpoint (high) Sensor input Switch-off delay 230 V AC, 16 A, closing relay 230 V AC +/-15%, Hz C C 1 st, intended for TG-R s...10 min. IP20 Ice-thermostat TM1-IT/D Thermostat 2-stage DIN-mounting A thermostat with two relay outputs, one for heating and one for cooling in sequence. Outputs Two, 5 A, 250 V AC, changeover relays 24 V AC or 230 V AC Setpoint C ( *1 Hysteresis 0.5 K Neutral zone K Sensor inputs One (1) IP20 Electronic 2-stage thermostat, heating/cooling TM2HC/D (*1. Intended for Regin NTC-sensor (see chapter on sensors). The sensor determines the scale range and which other scales are available (see sensor accessories) Chapter 1 Page 11

12 Thermostat 4-stage DIN-mounting A thermostat with four relay outputs, two for heating and two for cooling in sequence. Output Four, 5 A, 250 V AC, 2 changeover- and 2 closing relays 24 V AC or 230 V AC +/-10% Setpoint C ( *1 Hysteresis 0.5 K Step differential 1K Neutral zone K Sensor input One (1) IP20 Electronic thermostat, 2-stage heating, 2-stage cooling TM4HC/D (*1. Intended for Regin NTC-sensor (see chapter on sensors). The sensor determines the scale range and which other scales are available (see sensor accessories). Display unit Temp. sensor inputs DIN-mounting A display unit showing the present temperature. Three inputs make it possible to connect up to three temperature sensors. For example, main sensor, frost sensor and min/max limitation sensor. Built-in setpoint adjustment. The unit can be used independently with a temperature sensor or together with an electronic thermostat, transmitter or controller etc. 24 V AC +/-10% Sensor inputs Three, NTC-sensors Temp. range / / / C Channel / / / C Channel , C Channel / / / C IP20 Display unit DSP24N3/D Frost protection unit DIN-rail mounting The electronic frost protection unit FV1/D is mainly intended for use in airhandling systems. If the temperature falls under the setpoint the relay falls and an alarm LED will light up. The unit is connected to a REGIN NTC sensor that is placed in the heating coil or on the returnpipes from the heater. The sensor must have temperature range degrees, i.e. type TG-A130 or TG-D130. When there is a risk of frost FV1/D has one V control output that can be used to force the valve to open. Power consumption Setpoint P-band, forced Inputs Sensor input Control signal Outputs Relays Output signal (Y1) 24 V AC 2 VA C 5 K (fixed) One, C (NTC-sensor) V (from controller) One, 24 V AC 1 A, changeover relay and one, 230 V AC 1 A, closing relay V IP20 Frost protection FV1/D Page 12 Chapter

13 Thermostats, Electro mechanical Room thermostat 1-stage Thermostats, Electro mechanical For wall mounting. 1-stage. Mechanical operation by gas-filled stainless steel bellows. For cooling or heating application. Output Setpoint Hysteresis Thermal gradient 10 A (2.5 A) 250 V AC, changeover relay C 0.6 K 1K / 15 min IP30 Room thermostat. Changeover relay TI-N Room thermostat For fan-coil 1-stage For wall mounting. 1-stage. Mechanical operation by gas-filled stainless steel bellows. For cooling or heating application. Output Setpoint Hysteresis Thermal gradient One, 8 A (3 A) 250 V AC, changeover relay C 0.6 K 1K / 15 min IP30 Room thermostat. For fan-coils TI-FCU Room thermostat Wall mounting RRT025A is a room thermostat for controlling fan coils. The thermostat has a switch for on/off as well as a switch for controlling fan speed. Output Supply volage Setpoint Hysteresis 4 (2) A 230 V AC C 0.6 K IP20 Room thermostat. Changeover relay RRT025A Room thermostat For wall mounting. 1- or 2-stage. Output 15 A 250 V AC, changeover relay IP 30 or IP 65 (see below) Temperature range Hysteresis Step difference 1-stage, IP C C A19BBC stage, IP C C A19BRC stage, IP C 1.5 C C A28QA-9113 Duct thermostat Thermostat with bulb for duct or immersion well mounting. Output 15 A 250 V AC, changeover relay Temperature range Hysteresis 1-stage, IP C C A19ABC-9037 Fixture for mounting thermostat bulb in duct KANALFÄSTE Chapter 1 Page 13

14 Thermostat accessories Plastic casing Thermostat accessories Plastic casing with transparent lid for DIN-rail mounting. IP65. The casing comes in three sizes. EK72, 72 mm in width (4 modules) EK144, 144 mm in width (8 modules) EK216, 216 mm in width (12 modules) Regin s products for DIN-rail mounting come in two sizes. Small, 51 mm in width (3 modules) Large,101 mm in width (6 modules) Room for 1 smaller Regin product for DIN-rail mounting Room for 2 smaller or 1 larger Room for 4 smaller or 2 larger EK72 EK144 EK216 Transformer DIN-mounting TRAFO15/D, for DIN-rail mounting. Fits into standard housing and is three modules wide. The transformer has a built-in thermal load limiting device. Input voltage Output voltage Maximum load 230 V AC 24 V AC 15 VA IP20 Transformer, 15 VA 230 V/24 V TRAFO15/D Transformer Wall mounting TRAFO60 has built-in fuses on both poles of the secondary side. Input voltage 230 V AC Output voltage 24 V AC Maximum load 60 VA Size (BxHxD) 73x124x61 IP44 Transformer in housing for wall mounting TRAFO Front mounting-kit For front mounting of controllers and displays as well as other devices from the Regin range intended for DIN-rail mounting. Complete with front plate with flap, DIN-rail and nuts and bolts. IP55 Room for 2 smaller Regin devices or 1 larger device Room for 4 smaller Regin devices or 2 larger devices FMK1 FMK2 Page 14 Chapter

15 Controllers for electric heating Regin leads the market in controllers for electric heating. Different combinations of controller and step controllers make it possible to control up to several hundred kilowatts. Applications Control of electric heaters, radiators, heating cables, immersion heaters etc. Chapter Chapter 2 Page 15

16 Controllers for electric heating Electric heating controller 1-phase 230 V, 2-phase 400 V Wall-mounting Controllers for electric heating Electric heating controllers for radiators or heating batteries for ventilation.the controllers can be mounted on a wall or in a cabinet. The controllers pulse the entire power output ON/OFF and utilise time-proportional triaccontrol. Single-phase 230 V AC Two-phase 400 V AC Setpoint C (sensor determines the scale range) Output (load) 16 A (min 1 A) 1-phase max 3.6 kw, 2-phase max 6.4 kw IP30 (PULSER/D IP20) Pulser/D DIN-mounting Automatic adaption of control function, P or PI-control. For both 230 V AC or 400 V AC, automatic adaption Basic model PULSER Basic model for DIN-rail mounting PULSER/D ADD-on unit PULSER-ADD For additional, Main and Min/max limiting sensor PULSER-M For external control signal V. For DIN-rail mounting. PULSER-X/D Single phase 230 V AC or two phase 400 V AC With reset function for heater high temperature limit, 230 V AC With reset function for heater high temperature limit, 400 V AC PULSER220R* PULSER380R* For external control signal V, 230 V AC PULSER220X For external control signal V, 400 V AC PULSER380X *=Not stock-line Page 16 Chapter

17 Controllers for electric heating Electric heating controller with display Wall mounting Pulser-DSP is a zone controller intended for electric heating control. The controller can be connected to one- or two-phase electric heating i.e. electric batteries, radiators etc. Pulser-DSP has a built in sensor and an external sensor can also be used. Presence detector can be connected for control of so called comfort heating. This means, when the room (local) is empty, the controller is set in stand-by position with reduced setpoint. Setpoint, P-band and stand-by settings etc. are set by means of buttons on the front. Output (load) Settings Setpoint Comfort heating Stand-by temperature P-band I-Time Presence detection V AC, automatic adaption 2,.3 kw at max 230 V, 4 kw at 400 V C C C K sec. On / Off IP30 Electric heating controller with display for wall mounting. PULSER-DSP Electric heating controller Lon-communication With +/-3 C adjustment Pulser-Lon is a zone controller based on Lon-technology. It has a triac output for controlling electric heating (10A) and an extra output (cooling or heating), 3-position or 24V thermal actuator. The controller has a built in sensor and setpoint knob where the setpoint can be shifted +/- 3 C. An external sensor or setpoint device can also be used. Pulser-Lon can operate in different running modes: present, non-present and stand-by. The basic setpoint can be shifted with different values for heating and cooling. Zone control becomes operational when a window is open and is indicated via the output for window indication. Single-phase 230 V AC Output (load) 10 A (max 230 V) Setpoint C, the sensor determines the scale range (Regin NTC-sensor) Setpoint adjustment +/-3 C adjustment Load 24 V AC, 3-point and one on/off. 0.5 A IP30 Zone controller with communication, heating or cooling in sequence PULSER-HC-LON Chapter 2 Page 17

18 Controllers for electric heating Electric heating controller 3-phase, V Wall-mounting The controller is designed for wall-mounting and can be used with internal or external setpoint. Automatic adaption of control function, P or PI control. The controller can also be set to be controlled by external V signal. To control extra load the ancillary board TT-S1 can easily be mounted into the unit. Setpoint Max. load Sensor inputs Control signal 3-phase V AC C (sensor determines the scale range) Max. 25 A, min. 3 A/ phase Two (2), main- and max/min-limit sensors V IP30 Controller for electric heating TTC Ancillary board To control extra load with the TTC2000 the ancillary board TT-S1 can easily be mounted into the unit. Ancillary board for controlling extra load (+17 kw) TT-S Electric heating controller, 3-phase 200/400 V Electric heating controllers for radiators or electric heating batteries. The controller pulses the entire power output ON/OFF and utilises time-proportional triac control. The controller is intended for DIN-rail mounting. Automatic adaption of control function, P or PI control. It can also be set to be controlled by V. Output Setpoint Sensor inputs Control signal 3 phase V 25 A (TTC25 & TTC25X) 400 V, 17 kw 40 A (TTC40F & TTC25FX) 400 V, 27 kw C (sensor determines the scale range) Two (2), main- and max,min limit sensors V IP20 25 A, complete controller, also for V control signal TTC A, external control signal V DC only TTC25X A, complete controller, also for V control signal TTC40F A, external control signal V DC only TTC40FX Page 18 Chapter

19 Electric heating Accessories Step controller 4- and 6-stages DIN-mounting Electric heating Accessories Step controller for DIN-rail mounting in a cabinet or other enclosure. The controller is intended for controlling electric heating batteries, 4 or 6 relay output. The step controller can be set to sequence or binary mode. Can be used together with any controller with output V. The switch setting on the front of the controller determines the number of steps to be used. The input signal V is divided up into the number of steps, thus setting the switch-on point for each step. Special for TT-S6/D is that relay 6 can be used as a time lag relay to delay shut-off of the fan on shutting down the system (3 min. delay). Outputs Input Output signal Run-on time 4 or 6 relays, 2 A 240 V AC, closing relays, Binary or sequential control V alt V 24 V AC V, for controlling TTC25 (X) and TTC40 (FX) 3 min (only TT-S6/D) IP20 Step controller, with 4 relays TT-S4/D Step controller, with 6 relays TT-S6/D Scales and knobs For Pulser and TTC Scales for TTC25/40 and Pulser/D Scale C 3933 Scale C 3934 Scale C 3935 Knobs for TTC2000 Knob C 3608 Knob C 3609 Knob C 3610 Knobs for Pulser Knob C 1588 Knob C 1589 Knob C 1590 Night set-back unit DIN-mounting Night set-back unit for DIN-rail mounting in a cabinet or other enclosure. Intended for night set-back of the setpoint for TTC2000, TTC25 and TTC40F. This unit is controlled from a potential free closing contact in a time switch or similar. Setpoint Night set-back C K IP20 Night set-back unit NS/D Chapter 2 Page 19

20 Page 20 Chapter

21 Controllers-info Controllers The range consists of both analogue and digital controllers with or without LonWorks communication. Regin developed its first series of controllers at the end of the eighties. Now the range is made up of a series of controllers for air-handling and heating control. Digital controllers, Corrigo E-series Digital controllers, Corrigo R-, C-, L-series Digital and analogue controllers for heating control Analogue controllers for air handling Controllers with Lon-communication Overview analogue controllers 31 Accessories Temperature sensors Application guide Chapter Chapter 3 Page 21

22 Ready Corrigo E is a series of new comprehensive digital controllers intended to control temperature, humidity and pressure in HVACapplications. The controllers are user friendly and flexible, and they are also easy to integrate in various applications. The E-models can work standalone or be integrated in a network. Steady CORRIGO E is very easy to install and adapt to your specific needs. The controller fits on a standard DIN rail. Corrigo E is also available without display. The idea behind these models is that if you want to mount the controller in a cabinet but want to control it from the outside, you can use a wall- or front mounted configuration tool E-DSP. Fast and easy configuration The controller can be adapted to your specific needs by configuring the pre-installed applications. This can be done in several ways: Directly on the controller panel, in step-for-step-menues. By using an external configuration tool. (Corrigo-DSP) From a graphical user interface on a connected computer By down loading application files from the Internet. Corrigo E - The easy way to perfect control With CORRIGO E we introduce a new concept within controllers. It makes all the steps from installation to operation and maintenance a whole lot easier. Just mount the controller, adjust the pre-installed applications if needed, and start up. The model program has a logical order, which is helpful when you choose a model for your application. It will also be easier to get the right functionality at the right price. Using the CORRIGO configuration guides will save a lot of time and trouble. The guides are available both on paper or electronically (CD or Internet). You mark the functions you want, then get a number code that you enter into the controller. Pre-installed applications CORRIGO E is delivered with pre installed software for a wide variety of applications. The applications are a result of our long and extensive experience of heating and air handling systems. There are functions for controlling everything from single units to more complex applications with special function such as time scheduling, control in sequences, alarms, frost detection, etc. Open for communication CORRIGO E is developed for modern and flexible communication. This makes it easy to integrate with other products and systems and gives you extensive possibilities for remote control. Corrigo E can be used with most other control products on the market (sensors, switches, actuators, etc.). All models have a builtin port for serial communication via RS485. Communication ports for TCP/IP, Lon or EXOLine are available as options. Page 22 Chapter

23 Go CORRIGO E can be operated in different ways according to your own situation and needs. Operation and monitoring can be done easily on site on the operator panel, by graphical user interfaces on a computer or via the Internet. You can communicate with the controller remotely, which is a flexible and convenient way for service and maintenance. Service engineers can prepare their work in advance without actually being there. Stand-alone CORRIGO E has a clear and functional operator panel for easy operation on the spot. Operation status, alarms and values are viewed as clear text on an illuminated display. Status and alarms are indicated by displays on the front panel. Configuration and settings can be done manually via menus with logical push buttons. All operation, configuration and monitoring can also be done by connecting a local computer or an external terminal. If the controller is intended for use in a cabinet, it is possible to use Corrigo E without display connected to E-DSP. E-DSP works as a remote control and gives exactly the same possibilities as a standard Corrigo E with display. Network operation The CORRIGO E can be equipped with communication ports for TCP/IP, Lon or EXOline networks. This allows you to integrate the controller in existing networks and allows for operation from a central computer or via the Internet. And keep going... Once you have chosen a CORRIGO E you can go far. The controllers are developed for easy upgrading and scaleability at need. A system can easily be expanded by combining several controllers in the same system. New applications are continuously available on the Internet Chapter 3 Page 23

24 Controllers for air handling - and heating Controllers for air handling - and heating The Corrigo E-series controllers are intended to control air handling- and electric heating systems. The controller has a backlit display and shows all information in your own language. Corrigo E- series has a clear alarm indication with LEDs on the front. The devices have memory which stores all settings in the event of power failure. Besides having new improved qualities the controllers have all the advantages from the Corrigo C-series. New advantages Air-flow control 2. CO 2 -control of fans 3. Open for several communication standards 4. Wider model program, the right model for the right application 5. Improved display and easier function handling 6. Applications available on the web Overview functions Corrigo E Model In & Outputs Application AI UI DI AO DO Display Ventilation Heating E8-V X E15-V X E28-V X E8D-V X X E15D-V X X E28D-V X X E8-H X E15-H X E28-H X E8D-H X X E15D-H X X E28D-H X X E-DSP External configuration tool Page 24 Chapter

25 Controllers for air handling - and heating Digital controller Corrigo E (display) Digital controller Corrigo E (no display) External configuration tool, E-DSP Technical data 24 V AC +/- 15%, Hz Power consumption 4 VA Ambient temperature C Storage temperature C Ambient humidity Max. 90%RH IP20 (E-DSP IP44) Connection Disconnectable terminal strips, 4 mm 2 Memory back-up Built-in long-life battery with long back-up of all settings. Display Backlit, LCD, 4 rows of 20 characters Inputs Analogue inputs For PT1000-sensor or V Digital inputs For potential free contacts Outputs Analogue outputs V DC, 1 ma, short-circuit proof Digital outputs Triac 24 V AC, 0,5 A (1 A peak) Indicators Operation indication is indicated with green LED Alarm indication Clear script and blinking red LED Alarm output The output can be configured Models with display for air-handling systems (ventilation) 5 inputs and 3 outputs E8D-V 8 inputs and 7 outputs E15D-V 16 inputs and 12 outputs E28D-V Models without display for air-handling systems (ventilation) 5 inputs and 3 outputs E8-V 8 inputs and 7 outputs E15-V 16 inputs and 12 outputs E28-V Models with display for heating control 5 inputs and 3 outputs E8D-H 8 inputs and 7 outputs E15D-H 16 inputs and 12 outputs E28D-H Models with display for heating control 5 inputs and 3 outputs E8-H 8 inputs and 7 outputs E15-H 16 inputs and 12 outputs E28-H External configuration tool Delivered with 1.5 m connection cable E-DSP All Corrigo E-models are available from August 2004 er Chapter 3 Page 25

26 Air handling - Digital controllers Room controller Lon-communication Air handling - Digital controllers R10-Lon is intended for installations with Lon-communication. The controller has PI-control with setpoint and shiftable setpoint with individual values for heating/comfort, heating/economy, cooling/comfort, cooling/economy, constant room temperature depending on running mode and dew point control. R10-LON conforms with the Chilled Ceiling Controller 8070 profile (LonMarkprofile). Moreover, R10-Lon supports functions such as low temperature protection in shutdown mode, control override on open window switch, configuration of optional actuator by Lon etc. Output (3 alternatives) Inputs Setpoint displacement 24 V AC Two V, or Two Thermal actuators, or One increase/decrease (triac) Two, for presence, temp. or V-sensor +/-3 C IP30 Room controller with LON-communication R10-LON Digital controller Corrigo L Temperature control The Corrigo L10 controller is able to control temperature in up to three sequences that can be configured for heating, cooling, damper, plate exchanger or rotating exchanger. Various types of control functions can be chosen, i.e. supply air control, with or without outdoor compensation and room control, with or without cascade function. Scheduler The controller contains a week-scheduler for start/stop of the fans, with three period settings. There is also a menu for setting the running mode - AUTO / MAN -on / off. Built-in summer-time resetting. Alarms Alarm inputs from fan operational failure, pump, frost protection, high temperature alarm, chillers, smoke detectors, heat exchanger. The alarms are shown in the display in clear script and also with alarm output LED on the front. There is a button for alarm handling. Technical data 24 V AC +/- 15% Power consumption 3 VA Ambient temperature C Storage temperature C Ambient humidity Max 90%RH IP20 (IP55 when using FMK1) Connection Disconnectable terminal strips, 2.5 mm 2 Memory Flash. All settings are stored in the event of power failure. Realtime clock with 48 hour memory Display Backlit, LCD, two rows of 16 characters Inputs Temp. sensor inputs Four PT1000 Digital inputs Four (potential free contacts) Outputs Analogue outputs Three V DC, 5 ma, short-circuit proof Digital outputs Three relay outputs 230 V AC 10 A Two triac outputs 24 V AC, 0.5 A (max 1 A peak) Indicators Alarm output Blinking/ steady red LED Temperature control L Temperature control with communication L10-LON Page 26 Chapter

27 Air handling - Digital controllers Digital controller Corrigo C-series Temperature control Temperature and pressure control Temperature and humidity control Temperature, pressure and humidity control Corrigo C-Series Corrigo C is a small and powerful unit that handles most air-handling applications. In the C-series, models for temperature, humidity and pressure control are available. Scheduler The controller contains a year based scheduler. Week programs with up to three time periods for full speed operation and three periods for reduced speed operation. Also, shutdown on holiday and holiday periods can be set. Alarms Corrigo C have built in alarm indication shown as clear script in the display and two-coloured alarm and indication LEDs on the front. Alarms can be acknowledged by means of a separate button. The unit has alarm inputs for operation failure from fans, pump, frost protection, high temperature, fire, fire damper, filter protection, chillers, smoke detectors, rotation heat exchanger, temperature deviation (C20 and C40), sensor, output in manual override, switches not in auto position, pressure deviation and external alarm. Technical data 24 V AC +/- 15% Power consumption 3 VA Ambient temperature C Storage temperature C Ambient humidity Max 90%RH IP20 (IP55 when using FMK1) Connection Disconnectable terminal strips, 2.5 mm Memory Flash. All settings are stored in the event of power failure. Realtime clock with 48 hour memory Display Backlit, LCD, two rows of 16 characters Inputs Temp. sensor inputs pcs. PT1000 Digital inputs Potential free contacts Outputs Analogue outputs pcs V DC, 5 ma, short-circuit proof Digital outputs 6 pcs, 24 V AC, 0.5 A (max 1 A peak) and one (1) Alarm relay 24 V AC (1 A) Indicators Operation indicating 7 yellow LEDs Alarm indicating 7 blinking/ steady red LEDs Alarm output Blinking/ steady LEDs and a relay output, 24 V DC/ AC 1 A. Temperature control C Temperature and pressure control C Temperature and humidity control C Temperature, humidity and pressure control C Temperature control, with communication C10-LON Temperature and pressure control, with communication C20-LON Temperature and humidity control, with communication C30-LON Temperature, pressure and humidity control, with communication C40-LON Chapter 3 Page 27

28 Heating controllers - Digital Heating controller Corrigo U-series DIN-mounting Heating controllers - Digital The Corrigo U-series is a range of digital controllers for controlling heating units and boilers. Corrigo has a backlit display and automatically shows the most important information in an alternated series. In the event of an alarm, a red LED flashes on the front. Corrigo U-series also has alarm and function indication with two-coloured LEDs on the front. They have built in functions which are selected to adapt the Corrigo to the desired application. The U series has sensors in the inflow and return water pipes, room and outdoor temperature. Actuators can be connected with V control signal or simple 24 V increase/decrease actuators. The controllers include control for pumps and have inputs from pumps and expansion tanks and also from an external alarm. LonWorks-communication Corrigo U-series is available in models with LonWorks communication. Overview of functions U10 U20 Control heating circuit 1 2 Control domestic hot-water 1 1 Control for hot-water loading circuit 1 1 Measuring with min./max memory x x Number of analogue inputs (PT1000) 6 8 Number of digital inputs 4 8 Number of analogue outputs (0&10V) 3 6 Number of digital outputs 4 7 Operation indication with yellow LEDs x x Alarm indication in clear script and red LEDs x x Alarm input expansion tank x x Alarm input external alarm x x Night setback, two levels x x Pump stop automation with exercising operation x x Flash memory (all settings stored in case of power failure) x x Communication (LON versions) x x Year based clock x x Sum alarm output x x Statistics, collection of readings (LON versions) x x Technical data 24 V AC +/- 15% Power consumption 3 VA Ambient temperature C IP20 (front-mounted IP40) Connection Disconnectable terminal strips, 2.5 mm Display Flash. All settings are stored in the event of power failure. Realtime clock with 48 hour memory Display Backlit LCD, two rows of 16 characters Inputs Temp. sensor inputs pcs, PT1000 Digital inputs pcs (U20) 4 pcs (U10), Potential free contacts Outputs Analogue outputs pcs, V, 5 ma, short-circuit proof Digital outputs pcs, via triac 24 V AC, 0.5 A (max 1 A peak) 1 closing relay contact (alarm), 24 V DC/AC1 A Indicators Operation indicating 7 yellow LEDs Alarm indicating 7 blinking/ steady red LEDs Alarm output Flashing/ steady LEDs and a relay output, 24 V DC/AC 1 A. Heating controller U Heating controller U Heating controller U10-LON Heating controller U20-LON Page 28 Chapter

29 Heating controllers - Analogue Heating Controller DIN-mounting Heating controllers - Analogue A heating controller for controlling a heating circuit etc. The supply-water temperature is controlled and outdoor-temperature compensated according to the set heating-curve. A room sensor can be connected for room compensation. Output Inputs Setpoint Heating-curve offset Night setback Pulse interval One, three-point relay output 5A, 230V AC Three, (Sensor choice, see below) 24 V AC According to heating-curve corresponding to C K K sec IP20 Heating controller VRT24/D Sensors for VRT24/D Clamp-on sensor Room sensor Outdoor sensor TG-A1V TG-R4V TG-R6V Overview analogue controllers N.B. all analogue controllers below are intended for use together with Regin NTC-sensors. Type Mounting Control principle With display Supplyvoltage External setpoint Analogue outputs AL24T Wall T¹/T² 24 V AC 1 2 Yes AQUA24T Wall T¹/T² 24 V AC Yes 1 2 Yes Yes AQUA230T Wall T¹ 230 V AC Yes 1 2 Yes Yes AQUA24T/D DIN T¹ 24 V AC Yes 1 2 Yes Yes AQUA24TF Wall T¹ 24 V AC Yes 1 3 Yes Yes Yes Yes 2 AQUA24TF/D DIN T¹ 24 V AC Yes 1 3 Yes Yes Yes Yes 2 Yes AQUA230TF/D DIN T¹ 230 V AC Yes 1 3 Yes Yes Yes Yes 2 Yes AQUA24A1P Wall P 24 V AC 1 1 AL24A1 Wall P/PI 24 V AC 1 1 Yes Yes AL24A2 Wall P/PI 24 V AC 2 1 Yes AL24A1K Duct P/PI 24 V AC Yes 1 Yes AL24A1/D DIN P/PI 24 V AC Yes 1 1 Yes ALD24A1/D DIN P/PI Yes 24 V AC Yes 1 1 Yes AL24A2/D DIN P/PI 24 V AC Yes 2 1 Yes ALD24A2/D DIN P/PI Yes 24 V AC Yes 2 1 Yes AQUA24A1/D DIN P/PI 24 V AC Yes 1 2 Yes Yes Yes Yes AQUA24A1F/D DIN P/PI 24 V AC Yes 1 3 Yes Yes Yes Yes Yes 2 Yes AQUA24A2/D DIN P/PI 24 V AC Yes 2 2 Yes Yes Yes Yes AQUA24A2F/D DIN P/PI 24 V AC Yes 2 3 Yes Yes Yes Yes Yes 2 Yes AQUA24A3/D DIN P/PI 24 V AC Yes 3 2 Yes Yes Yes Yes AQUA24A3F/D DIN P/PI 24 V AC Yes 3 3 Yes Yes Yes Yes Yes 2 Yes AQUA24A1A/D DIN P/PI 24 V AC Yes 1 1 Yes 3-position outputs Sensor inputs Cascade control MIN-limitation Max-limitation Frost protection controlling Shutdown mode SPC-input Frost protection, relay output Change-over T1 = Time proportional 3-point control of Triac T2 = Control of two actuators in heating / cooling configuration Chapter 3 Page 29

30 Controllers for air handling - Analogue Controller Three-point floating DIN-mounting Controllers for air handling - Analogue Controllers intended for controlling damper actuators or valve actuators with three-point floating output (floating control). The controller can be used for constant supply air temperature or for room temperature control with or without cascade control. Controller Three-point floating wall-mounting 24 V AC (AQUA24T and 24T/D) 230 V AC (AQUA230T) Maximum load 7 VA (AQUA24T and 24T/D) 3 VA (AQUA230T) Control signal (output) Three-point (floating-control), output 24 V AC (heating or cooling) Fuse on PC board 500 ma (AQUA24T only) Ambient humidity Max. 90%RH IP20 Sensor inputs Two inputs (main and limiting sensor) Setpoint C (sensor determines the scale range) Cascade factor (CF) Minimum limit (Min.) C Controller 24 V AC, DIN-mounting AQUA24T/D Controller for wall mounting, 24 V AQUA24T Controller for wall mounting, 230 V AQUA230T Room controller Three-point floating AL24T and AL24TN are two three-point floating controllers intended for wall mounting. The controllers have two modes of operation, one is for traditional increase/decrease actuators. The other is intended to control two thermal actuators in heating/cooling configurations. When using thermal actuators the controllers work with time proportional stepless output. AL24T has change-over and AL24TN has nightsetback. Output Sensor inputs P-Band Neutral zone Setpoint Two, 24V AC 24 V AC Two, (AL24TN has one sensor- and one nightsetback input.) 20 K (increase / decrease) 1K (thermal actuator) 1K (thermal actuator) C, adjustable from outside IP30 Room controller, with change-over AL24T Room controller, with night-setback AL24TN Page 30 Chapter

31 Controllers for air handling - Analogue Controller Three-point floating Active frost protection Controller intended to control a valve actuator for water-heated systems. The controller is designed for wall mounting, has a built-in room sensor and can be used to control supply air temperature or room temperature with or without cascade control. The controller has built-in active frost protection with two alarm relays and automatic shutdown control. Output One three-point floating, 24 V AC Max. load 7 VA 24 V AC +/-10% Sensor inputs Three (3) Setpoint C (sensor determines the scale range) Min.limitation C Cascade factor Frost alarm 5 C Shutdown mode 25 C Alarm relays 2 A 250 V AC, breaking contact 2 A 24 V AC, change-over contact IP30 Controller with active frost protection AQUA24TF Controller Three-point floating Active frost protection Controller intended to control a valve actuator for water-heated systems.the controller is intended for DINmounting, it can be used to control supply air temperature or room temperature with or without cascade control. It has built-in active frost protection with two alarm relays and automatic shutdown control. Output One three-point floating, 24 V AC Sensor inputs Three (3) Max. load 7 VA (AQUA24TF/D) 3 VA (AQUA230TF/D) 24 V AC +/-10% (AQUA24TF/D) 230 V AC +/-10% (AQUA230TF/D) Setpoint C (sensor determines the scale range) Min.limitation C Cascade factor Frost alarm 5 C Shutdown mode 25 C Alarm relays 2 A 250 V AC, breaking contact 2 A 24 V AC, change-over contact IP30 DIN-controller with active frost protection 24 V AC AQUA24TF/D DIN-controller with active frost protection 230 V AC AQUA230TF/D Room controller V output signal Wall mounting Controller with one output V signal. The controller is intended to control cooling- heating valve or damper- actuator. P- function. Reversible output signal. It is also possible to connect an external sensor. Output Setpoint Displacement P-Band One, V 24 V AC C, under the cover +/- 3 K, outside 1.5 K IP30 Room controller AQUA24A1P Chapter 3 Page 31

32 Controllers for air handling - Analogue Controller with display Analogue output V Wall-mounting ALD24A1/A2 are two room controllers with display, intended for wall mounting. They have a built-in temperature sensor and one reversible V output (A2-model has 2 outputs) for heating or cooling. The controllers have adjustable P- and I-time, input for occupancy control, changing setpoint between comfort and stand-by level. The A1-model also has input for changeover between heating or cooling function. All settings are made using the menu system in the display. Actual output value is shown continuously in the display. Output Display Power consumption Sensor input Change-over input Occupancy control input Setpoint P-Band I-time One (or two ALD24A2) V DC, 1 ma Actual temperature, occupancy control status and bargraphs for heating and cooling are shown 24 V AC +/- 15% Hz 4 VA One, C (NTC sensor) For Regin NTC or closing contact Closing contact from i.e. presence detector IR24-P C K s IP30 Controller, 1 output V with display ALD24A Controller, 2 outputs V with display ALD24A Controller with display Analogue output V Wall-mounting ALD24VAV-LON is a room controller with communication. It has display and one built-in temperature sensor and two reversible V outputs. The controllers have adjustable P- and I-time, input for occupancy control, changing setpoint between comfort and stand-by level. There is also one extra v output for connection to a Lon-network. All settings are made using the menu system in the display. Output Two V DC, 1 ma Display Actual temperature, occupancy control status and bargraphs for heating and cooling are shown 24 V AC +/- 15% Hz Power consumption 4 VA Sensor input One, C (for Regin NTC-sensor) Input from external source One, V (i.e. reference signal from LON-Network) Input Co 2 -sensor V, proportional to ppm CO 2 -level Occupancy control input Closing contact from i.e. presence detector IR24-P Setpoint C P-Band K I-time s IP30 Controller, 1 output V with display ALD24VAV-LON Page 32 Chapter

33 Controllers for air handling - Analogue Controller V output Wall mounting A room controller for wall mounting with analogue output signal V. The controller has a built-in sensor, a setpoint control and is available with either one or two outputs. Uses: Control of a valve or damper actuator. AL24A1 has an input for season change-over between the cooling and heating function. The change-over can be activated by means of an external closing contact or a sensor mounted on the supply-water side of the heating/cooling unit. AL24A2 has two outputs in sequence, heating/cooling with adjustable neutral zone. Control function P or PI can be selected. Output V, One (AL24A1) or Two (AL24A2) 24 V AC Sensor inputs One, (AL24A1) Setpoint C P-Band K I-Time 2min/20min, selectable Neutral zone K (AL24A2 only) IP30 Room controller, 1 output V AL24A Room controller, 2 outputs V, cooling/heating in sequence AL24A Controller V output Duct mounting A complete controller for mounting directly into a ventilation duct. The controller has a built in sensor and setpoint control. An external setpoint potentiometer can be connected if required. Can be used to control either cooling or heating. P or PI control optional. AL24A1K has an input for changeover between cooling and heating. The change-over can be activated by means of an external closing contact or a sensor mounted on the supply-water side of the heating/cooling unit. Output One, V 24 V AC Setpoint C P-Band K I-time 2min/20min, selectable Change-over Input for closing contact or sensor ( C) IP65 Duct controller, 1 output V AL24A1K Chapter 3 Page 33

34 Controllers for air handling - Analogue Controller Analogue outputs V DIN-mounting Controllers for air handling units with damper, heat exchanger, control valves, electric heating, step controllers etc. Other application examples are control of cooling water, underfloor heating, constant control etc. The controllers have a display showing current values. A sensor can be connected as main sensor, i.e. a duct sensor. The controller is available in two versions, with one or two V outputs. Optional control function, P or PI. Display version Output Display Sensor input Change-over input Input, Setpoint P-band I-Time Neutral zone One, V DC, 1 ma. (ALD24A1) Two, V DC, 1 ma. (ALD24A2) LED (shows C irrespective of sensor) One, C for Regin NTC-sensor One, for Regin NTC-sensor or closing contact (only AL(D)24A1) 24 V AC C K 1 min. / 10 min K (only AL(D)24A2) IP20 Controller, 1 output V, change-over AL24A1/D Controller, 2 outputs V AL24A2/D Controller, 1 output V, change-over, with display ALD24A1/D Controller, 2 outputs V, with display ALD24A2/D Page 34 Chapter

35 Controllers for air handling - Analogue Controller Analogue outputs V DIN-mounting Controllers for air handling units with damper, heat exchanger, control valves, electric heating, step controllers etc. Controllers intended primarily for HVAC systems with dampers, heat exchangers and control valves or electric heating. All the controllers can be used for supply air temperature or room temperature control with or without cascade control, cooling or heating. With P/PI control, minimum and maximum limiting, SPC (setpoint control), damper limiting etc. Output One, two or three V DC Sensor input Two (2), limiting sensor is always C 24 V AC +/-10% Setpoint C, (sensor determines the scale range) P-Band K I-time minutes Cascade factor Min.limitation C, (sensor TG-K360 is used) Max.limitation C, (sensor TG-K360 is used) IP20 Controller, 1 output V, DIN-mounting AQUA24A1/D Controller, 2 outputs V, DIN-mounting AQUA24A2/D Controller, 3 outputs V, DIN-mounting AQUA24A3/D Controller, DIN-mounting Analogue outputs V Frost protection Controller with built in frost protection for control of air handling systems with damper, heat exchanger and valve actuators for water-borne heating and cooling. All controllers in the series can be used for supply air or room control with cascade function. The controller is intended for DIN-mounting. P or PI control is selectable. Output One, two or three V DC Alarm output 250 V AC 2 A, breaking contact 24 V AC 2 A, change-over contact Sensor input Three (3), limiting sensor is always C 24 V AC Setpoint C, (sensor determines the scale range) P-Band K I-time minutes Cascade factor Min.limitation C (Use sensor TG-K360) Max.limitation C (Use sensor TG-K360) IP20 Controller with built-in frost protection, 1 output V, DIN-mounting AQUA24A1F/D Controller with built-in frost protection, 2 outputs V, DIN-mounting AQUA24A2F/D Controller with built-in frost protection, 3 outputs V, DIN-mounting AQUA24A3F/D Chapter 3 Page 35

36 Controllers and display units - Analogue Controller Analogue input/output DIN-mounting Controllers and display units - Analogue Universal controllers for analogue signal. For example from humidity-, temperature- or pressure transmitters. Aqua24A1/D is settable for P or PI control and has adjustable P band and I-time. The output signal is reversible, e.g. it can be set for direct- or reverse function (for example humidifying or dehumidifying). SPC input gives the possibility to shift the setpoint. Can be used with display. Output signal One, V Input One (1) 24 V AC Setpoint % RH, and input for external setpoint adjustment V P-band 0, % I-time 10 s...10 min. IP20 Controller, V ( % universal) AQUA24A1A/D Controller, range Pa AQUA24A1P3/D Controller, range Pa AQUA24A1P5/D Controller, range Pa AQUA24A1P10/D Controller, range kpa AQUA24A1P600/D Display unit Temp. sensor inputs DIN-mounting A display unit showing the present temperature. Three inputs makes it possible to connect up to three temperature sensors. For example, main sensor, frost sensor and min./max limitation sensor. Built-in setpoint adjustment. The unit can be used independently with a Regin NTC temperature sensor or together with an electronic thermostat, transmitter or controller etc. 24 V AC +/-10% Sensor inputs Three, NTC-sensors Temp range / / / C Channel / / / C Channel , C Channel / / / C IP20 Display unit DSP24N3/D Display Analogue input DIN-mounting A display unit showing the readings for pressure, temperature, humidity, air velocity, CO 2 etc.the required range is set by means of the operating switches on the front. The unit of measurement is presented by means of a label which is placed on the front below the display window. The following labels are supplied; C, Pa, kpa, mbar, Bar, %RH and ppm (x1000). The instrument can be used together with an electronic transmitter or controller. Input signal 24 V AC Input signal V or ma Display LED, 3-digits Range 0...1, 0...2, 0...4, 0...5, , , , , , IP20 Display unit, analogue output DSP24A1/D Page 36 Chapter

37 Controllers and Step controllers Outdoor compensation module Controllers and Step controllers A supplementary module for the controllers in the Aqualine series with SPC input. Can be used for both summer and winter compensation of the controller s setpoint. Both the compensation factor and the compensation starting point are adjustable. Output Sensor inputs Winter compensation Summer compensation Max limitation V One, use TG-R600 or TG-K V AC C (Start point) % (Compensation factor) % (Compensation factor) C (Start point) C IP20 Outdoor compensation module UK/D Step controller 1-stage and 2-stage Step controllers suitable for heating / cooling or alarm applications. Convert V input signal to relay output. The modules are suitable for mounting on a DIN-rail in a cabinet or other enclosure and have adjustable switching points. SC2/D can be set for either binary or sequential control. Output Input signal Settings Step diff. (SC2/D) (SC1/D) One, Change-over, 10 A, 250 V AC (SC2/D) Two relays, closing, 10 A, 250 V AC V 24 V AC V V IP20 Step controller, with 1 relay (change-over) SC1/D Step controller, with 2 relays (binary or sequential) (closing) SC2/D Step controller 4- and 6-stages DIN-mounting Step controller for DIN-rail mounting in a cabinet or other enclosure. The controller is intended for controlling electric heating batteries, 4 or 6 relay output. The step controller can be set to sequence or binary mode. Can be used together with any controller with output V. The switch setting on the front of the controller determines the number of steps to be used. The input signal V is divided up into the number of steps, thus setting the switch-on point for each step. Special for TT-S6/D is that relay 6 can be used as a time lag relay to delay shut-off of the fan on shutting down the system (3 min. delay). Outputs Input Output signal Run-on time 4 alt. 6 relays, 2 A 240 V AC, closing relays, Binary or sequential control V alt V 24 V AC V (for controlling TTC25 (X) 3 min. (only TT-S6/D) IP20 Step controller, with 4 relays TT-S4/D Step controller, with 6 relays TT-S6/D Chapter 3 Page 37

38 Relay modules Relay module RM6-24/D Relay modules Relay module to use when controlling objects using higher voltage or having larger current drain than the Corrigo outputs can handle. If individual manual control of each object is necessary, use RM6-24/D which has manual override switches. 24 V AC +/-15% Inputs Six 24 V AC Output Six potential free change-over contacts, 230 V, 10 A RM6H-24/D Relay unit RM6-24/D Relay unit, with manual/auto-switches RM6H-24/D Page 38 Chapter

39 Controller accessories Frost protection unit DIN-mounting Controller accessories The electronic frost protection unit FV1/D is mainly intended for use in air handling systems. If the temperature falls below the setpoint the relay falls and an alarm LED will light up. The unit is connected to a REGIN NTC sensor that is placed in the heating coil or on the return-pipes from the heater. Sensor must have temperature range degrees, i e type TG-A130 or TG-B130. When there is a frost risk FV1/D has one V control output that can be used to force the valve to open. Power consumption Setpoint P-band, forced Inputs Sensor input Control signal Outputs Relays Output signal (Y1) 24 V AC 2 VA C 5 K (fixed) One, C (NTC-sensor) V (from controller) One, 24 V AC 1 A, changeover relay and one, 230 V AC 1 A, closing relay V IP20 Frost protection (delivered without sensor) FV1/D Signal converter DIN-mounting Signal converter which selects the highest and lowest signal of up to 6 connected inputs and transforms them into two separate output signals, maximum and minimum. If fewer than 6 inputs are used, unused inputs are left open. Both outputs can be used simultaneously. Input signal Output signal Precision 24 V AC Six, V One maximum signal V and one minimum signal V +/- 3% of input signal IP20 Signal converter MM6-24/D Transformer DIN-mounting TRAFO15/D, for DIN-rail mounting. Fits into standard housing and is three modules wide. The transformer has a built-in thermal load limiting device. Input voltage Output voltage Maximum load 230 V AC 24 V AC 15 VA IP20 Transformer, 15 VA 230 V/24 V TRAFO15/D Chapter 3 Page 39

40 Controller accessories Transformer Wall mounting TRAFO60 has built-in fuses on both poles of the secondary side. Input voltage 230 V AC +/- 10% Output voltage 24 V AC Maximum load 60 VA Size (BxHxD) 73x124x61 IP44 Transformer wall mounting TRAFO Front mounting-kit For front mounting of controllers and displays as well as other devices from the Regin range intended for DIN-rail mounting. Complete with front plate with flap, DIN-rail and nuts and bolts. IP55 Room for 2 smaller Regin devices or 1 larger device Room for 4 smaller Regin devices or 2 larger devices FMK1 FMK2 Mounting kit for easier front-mounting of the Corrigo devices. IP40. Room for one Corrigo unit Room for example for one Corrigo and one relay module. FMC FMCR Plastic casing Plastic casing with transparent lid for DIN rail mounting. IP65. The casing comes in three sizes. EK72, 72 mm in width (4 modules) EK144, 144 mm in width (8 modules) EK216, 216 mm in width (12 modules) Regin s products for DIN-rail mounting come in two sizes. Small, 51 mm in width (3 modules) Large,101 mm in width (6 modules) Room for 1 smaller Regin product for DIN-rail mounting Room for 2 smaller or 1 larger Room for 4 smaller or 2 larger EK72 EK144 EK216 Page 40 Chapter

41 Temperature Sensors A broad range of Regin NTC, PT100 and PT1000 sensors with or without housing. The range also contains a series of newly developed temperature transmitters with output signal V or mA. NTC-sensors PT100 / PT sensors Temperature transmitters 47 Chapter Chapter 4 Page 41

42 Temperature sensors - NTC Clamp-on sensor Temperature sensors - NTC For measuring surface temperature, Including clamp. Time constant Material Length of cable 13 sec. Aluminium 1.5 m IP65 Clamp-on sensor, temperature range: C TG-A Clamp-on sensor, temperature range: C TG-A150 Clamp-on sensor, temperature range: C TG-A170 Clamp-on sensor, temperature range: C TG-A190 N.B. Can not be used together with the Pulser series Bulb sensor Universal sensor Diameter Material Length of cable Ø6 mm Nickel plated brass 1.5 m IP65 Temperature range: C TG-B Temperature range: C TG-B130 Temperature range: C TG-B150 Temperature range: C TG-B160 Temperature range: C TG-B170 Temperature range: C TG-B190 N.B. Can not be used together with the Pulser series Floor sensor For measuring floor temperature Diameter Length of cable Ø7 mm 2.5 m IP65 Floor sensor, temperature range C TG-G Heat conductive paste for TG-A... & TG-B... Heat conductive paste in tube, 1 g. PASTA Page 42 Chapter

43 Temperature sensors - NTC Immersion sensor For measuring water temperature Time constant Connection Diameter Material Pressure class Length Length of cable 4 s R1/4" Ø6 mm Stainless steel PN mm, (TG-D230, 220 mm) 1.5 m IP65 Immersion sensor, Temperature range: C TG-D Immersion sensor, Temperature range: C TG-D150 Immersion sensor, Temperature range: C TG-D170 Immersion sensor, Temperature range: C TG-D190 Immersion sensor, as above but length 220 mm, Temp. range: C TG-D230 N.B. Can not be used together with the Pulser series Mounting flange for TG-D1... for mounting in ventilation duct DF Well Well for immersion sensors. Connection Pressure class R1/2" PN25 Brass, length 90 mm DR Stainless steel, length 90 mm DR-90R Brass, length 135 mm DR-135 Stainless steel, length 135 mm DR-135R Adapter 1/4" to 1/2". For mounting TG-D1... in 1/2" ins ADAPTER Duct sensor For measuring air temperature in ventilation ducts. Time constant Diameter Insertion length Length of cable 38 s Ø9 mm mm, adjustable 1.5 m IP20 Duct sensor, Temperature range: C TG-K Duct sensor, Temperature range: C TG-K310 Duct sensor, Temperature range: C TG-K330 Duct sensor, Temperature range: C TG-K350 Duct sensor, Temperature range: C TG-K360 Duct sensor, Temperature range: C TG-K370 Room sensor With setpoint adjustment For measuring room temperature. TG-R430 can also be used for setpoint adjustment only. IP30 Room sensor with setpoint adjustment, C TG-R Chapter 4 Page 43

44 Temperature sensors - NTC Room sensor For measuring room temperature. IP30 Room sensor, C TG-R Room sensor, C TG-R550 Room sensor, C TG-R530M For measuring average room temperature. Two TG-R530M are connected in series to the sensor input. Outdoor sensor For measuring oudoor temperature, or in rooms where higher protection class is needed. IP65 Outdoor sensor, C (only together with UK/D) TG-R Outdoor sensor, C TG-R630 Outdoor sensor, C TG-R650 Setpoint device For panel mounting. IP20 Setpoint device, C TBI Setpoint device, C TBI-15 Setpoint device, C TBI-30 Setpoint device, C TBI-50 Setpoint device, C TBI-70 Setpoint device, C TBI-90 Setpoint device, % TBI-100 Sensors for VRT24/D Clamp-on sensor Room sensor Outdoor sensor TG-A1V TG-R4V TG-R6V Page 44 Chapter

45 Temperature sensors - PT100/PT1000 Clamp-on sensor With housing Temperature sensors - PT100/PT1000 For measuring surface temperature, Including clamp and a tube of heat conductive contact paste. Time constant Temp.range 4 s C IP65 Clamp-on sensor TG-AH2/PT Clamp-on sensor For measuring surface temperature, Including clamp. Temperature range C Time constant 13 s Length of cable 1.5 m IP65 Clamp-on sensor TG-A1/PT Clamp on sensor TG-A1/PT1000 Imerssion sensor With housing For measuring water temperature Temperature range C Time constant 4 s Length 75 mm (Ø6 mm) Connection R1/4" Material Stainless steel Pressure class PN10 IP65 Immersion sensor TG-DH2/PT Immersion sensor TG-DH2/PT1000 Immersion sensor For measuring water temperature Temperature range Time constant Length Connection Diameter Material Pressure class C 4 s 135 mm (TG-D2 = 220 mm) R1/4" Ø4 mm Stainless steel PN10 IP65 Immersion sensor TG-D1/PT Immersion sensor TG-D1/PT1000 Immersion sensor, PT1000 (length 220 mm) TG-D2/PT1000 Setpoint device Mounting flange for TG-D1... for mounting in ventilation ducts DF For panel mounting. Temperature range C IP20 Setpoint device TBI-PT Chapter 4 Page 45

46 Temperature sensors - PT100/PT1000 Duct sensor With housing For measuring air temperature in ventilation ducts Temperature range C Time constant 25 s including dead time Dead time Approx. 1 s Insertion length mm, adjustable IP65 Duct sensor TG-KH1/PT Duct sensor TG-KH1/PT1000 Duct sensor For measuring air temperature in ventilation ducts Temperature range Time constant Length Dead time Diameter Length of cable C 50 s including dead time mm, adjustable Approx. 2 s 9 mm 1.5 m IP65 Duct sensor TG-K3/PT Duct sensor TG-K3/PT1000 Bulb sensor Universal sensor Temperature range Material Diameter Length of cable C Nickel plated brass 6 mm 1.5 m IP65 Bulb sensor TG-B1/PT Bulb sensor TG-B1/PT1000 Room sensor For measuring room temperature with or without setpoint adjustment Temperature range C IP30 Room sensor, with setpoint adjustment TG-R4/PT Room sensor TG-R5/PT100 Room sensor TG-R5/PT1000 Outdoor sensor For measuring outdoor temperature Temperature range C IP65 Outdoor sensor TG-R6/PT Outdoor sensor TG-R6/PT1000 Page 46 Chapter

47 Temperature transmitters Temperature transmitter Room mounting Temperature transmitters Temperature transmitter for room/wall-mounting Temperature transmitter Wall mounting Temperature range Output Accuracy TRT/TRT50 TRT50 TRT-420 TRT C V or ma +/-0.5 C, (TRT50...+/-0.7 C) IP30 (room casing), IP65 (wall casing) 24 V AC or V DC 24 V DC ( ma output) V DC vid R-last <500 ohm or V DC vid R-last <50 ohm V DC Room temperature transmitter V output TRT Room temperature transmitter ma output TRT-420 Temperature transmitter for wall-mounting, V output TRT Temperature transmitter for wall-mounting, ma output TRT Temperature transmitter Immersion mounting Temperature transmitter Duct mounting Temperature transmitter for immersion/duct-mounting Temperature range C Output V or ma Accuracy +/-0.5 C at 20 C Insertion length TLT..., 75 mm TDT..., adjustable mm IP65 TLT130 / TDT V AC or V DC TLT / TDT V DC Connection (TLT...) 1/4" Temperature transmitter for immersion-mounting, V TLT Temperature transmitter for immersion-mounting, ma TLT Temperature transmitter for duct-mounting, V TDT Temperature transmitter for duct-mounting, ma TDT Chapter 4 Page 47

48 Humidity Regin began working with humidistats in 1947 and is today one of the market s leading manufacturers of humidistats. The company has a complete range of everything from electro-mechanical humidistats to controllers and transmitters. Humidistats, electro mechanical on/off 49 Humidistats, electronic on/off 50 Humidity transmitters Accessories 53 Digital controllers (C30, C40) Chapter 5 Page 48 Chapter

49 Humidity - Electro-mechanical Room humidistat Wall mounting Humidity - Electro-mechanical Electro-mechanical humidistat with a synthetic element. Output One. 230V AC, 5A, change-over Setpoint % Hysteresis 4 % RH IP30 Room humidistat, 1-step HR-S Room humidistat Electro-mechanical humidistat with changeover contact. The humidistat is intended for wall mounting and has tamper proof settings. Switch data Setpoint Hysteresis Step differential 5 A 250 V AC, HR1/HR2 10 A, HR1-DH %RH 4 %RH (HR2) %RH IP21 Room humidistat, 1 step, 5 A HR Room humidistat, 1 step for dehumidifying, 10 A 250 V AC HR1-DH Room humidistat, 2 steps HR Duct/Wall humidistat Electro-mechanical humidistat with changeover contact. The humidistat is intended for mounting in ducts or on a wall. Switch data Setpoint Hysteresis Step differential (HMH2) 10 A 250 V AC, change-over %RH 3 %RH %RH IP54 Duct humidistat, 1 step HMH Duct humidistat, 2 steps HMH Humidistat (proportional) Electro-mechanical humidistats with proportional output signal. The humidistat is intended for mounting in a room (HRP and HPH) or in a duct/wall (HPH only). Maximum voltage Setpoint Potentiometer resistant 24 V HRP %RH HPH %RH 148 or 1000 ohm IP20 (HRP), IP54 (HPH) Room humidistat with 148 ohms output Room humidistat with 1000 ohms output HRP148 HRP1000 Duct/wall humidistat with 148 ohms output Duct/wall humidistat with 1000 ohms output HPH148 HPH Chapter 5 Page 49

50 Humidity - Electronic Electronic humidistat Humidity - Electronic Electronic humidistat with one or two relay outputs. The humidistat is intended for mounting on a DIN-rail. An external transmitter is connected to the module. Output One or two, 10 A, 250 V AC Input V 24 V AC +/-10% Humidity rangeability %RH Hysteresis %RH Step diff. (HD2) %RH IP20 Electronic humidistat, 1 step, change-over contact HD1-24/D Electronic humidistat, 2 steps, closing contacts HD2-24/D Electronic humidistat Wall-mounting Electronic humidistat for wall-mounting with one relay output. Output 1 step 5 A, 24 V AC, change-over Setpoint %RH Hysteresis % RH 24V AC/DC +/-15% IP65 Electronic humidistat, wall-mounting, 1-step HRD1-24 Electronic humidistat Duct mounting Electronic humidistat for duct-mounting with one relay output. Output 1 step 5 A 24 V AC, change-over Setpoint % RH Hysteresis % RH 24 V AC/DC +/-15% Insertion length mm adjustable IP65 Electronic humidistat, duct-mounting, 1-step HDD1-24 Page 50 Chapter

51 Humidity/Temperature transmitters Room humidity transmitter Humidity/Temperature transmitters Transmitter for measuring relative humidity and temperature. Intended for wall mounting. Output signal V or ma (*1 24 V AC/DC ( V output signal) 24 V DC ( ma output signal) Working range humidity %RH Working range temp C Accuracy humidity +/- 3% RH Accuracy temp +/-0,8 K IP20 Humidity transmitter, V HRT Humidity transmitter, ma HRT-420 Combined humidity and temperature transmitter, V HTRT Combined humidity and temperature transmitter, ma HTRT-420 *1= ma output signal only at DC supply voltage (two-wire) Humidity transmitter Wall-mounting +/-3% Transmitter for measuring relative humidity and temperature. Output V or ma, (*1 Working range Humidity: %RH Temperature: C Accuracy/humidity +/- 3%RH ( % RH) otherwise +/- 5% RH Accuracy/temperature +/-0.8 K 24 V AC / V DC IP65 Humidity transmitter, V HRT Humidity transmitter, mA HRT Combined humidity and temperature transmitter, V HTRT350 Combined humidity and temperature transmitter, ma HTRT *1= ma output signal only at DC supply voltage (two-wire) Humidity transmitter Wall-mounting +/-2% HRT250/HTRT250 Transmitter for measuring relative humidity and temperature. Output V or ma, (*1 Working range Humidity: %RH Temperature: C Accuracy/humidity +/- 2%RH, (+/- 3% %RH) Accuracy/temperature +/ V AC / V DC IP65 Humidity transmitter, V HRT Humidity transmitter, mA HRT Combined humidity and temperature transmitter, V HTRT250 Combined humidity and temperature transmitter, ma HTRT *1= ma output signal only at DC supply voltage (two-wire) Chapter 5 Page 51

52 Humidity/Temperature transmitters Humidity transmitter Duct-mounting +/-3% Transmitter for measuring relative humidity and temperature. Output V or ma, *1 Working range Humidity: %RH Temperature: C Accuracy/humidity +/- 3%RH ( % RH) otherwise +/- 5% RH Accuracy/temperature +/-0.7 K (At 20 C) 24 V AC/ V DC Insertion length mm, adjustable IP65 Humidity transmitter, V HDT Humidity transmitter, mA HDT Combined humidity and temperature transmitter, V HTDT3200 Combined humidity and temperature transmitter, ma HTDT *1= ma output signal only at DC supply voltage (two-wire) Humidity transmitter Duct-mounting +/-2% Transmitter for measuring relative humidity and temperature. Output V or ma, *1 Working range Humidity: %RH, Temp: C Accuracy/humidity +/- 2%RH (+/- 3% RH % RH) Accuracy/temperature +/-0.4 K 24 V AC/DC Insertion length mm, adjustable IP65 Humidity transmitter, V HDT Humidity transmitter, mA HDT Combined humidity and temperature transmitter, V HTDT2200 Combined humidity and temperature transmitter, ma HTDT *1= ma output signal only at DC supply voltage (two-wire) Certificate Certificate of calibration for HRT250- and HDT2200 models, when certified calibration is demanded. Must be ordered with new transmitter. CCERT-E Page 52 Chapter

53 Humidity accessories and spare parts Controller Analogue input/output DIN-mounting Humidity accessories and spare parts Universal controllers for analogue signal. For example from humidity-, temperature- or pressure transmitters. AQUA24A1A/D is settable for P or PI control and has adjustable P band and I-time. The output signal is reversible, e.g. it can be set for direct- or reverse function (for example humidifying or dehumidifying). SPC input gives the possibility to shift the set point. Can be used with display DSP24A1/D. Output signal One, V Input One (1), V 24 V AC Setpoint % RH, and input for external set point adjustment V P-band 0, % I-time 10 s...10 min. IP20 Controller, % (universal) AQUA24A1A/D Display Analogue input DIN-mounting A display unit showing the readings for pressure, temperature, humidity, air velocity, CO 2 etc.the required range is set by means of the operating switches on the front. The unit of measurement is presented by means of a label which is placed on the front below the display window. The following labels are supplied; C, Pa, kpa, mbar, Bar, %RH and ppm (x1000). The instrument can be used together with an electronic transmitter or controller. 24 V AC Input signal V or ma Display LED, 3-digits Range 0...1, 0...2, 0...4, 0...5, , , , , , IP20 Display unit, analogue output DSP24A1/D Accessories Hair elements Hair element for HR1,HR2 length 107 mm 1606 Hair element for HRP length 115 mm 1607 Hair element for HMH/HPH length 182 mm 1608 Filter Dust filter made of Gore-Tex, standard on the humidity transmitters HA Sintered brass filter, protection in demanding environments HA Sintered stainless steel filter, protection in demanding environments HA Teflon filter HA Metal filter HA Weather and wind shield Radiation shield, for outdoor mounting of HRT250/HTRT250 HVS Protective plastic tube for HMH to be used in conditions of high air velocity. 375 Calibration accessories Calibration device for sensor probes, horizontal mounting HA Calibration device for sensor probes, vertical mounting HA ampoules 10%RH incl. 5 textile discs HA ampoules 35%RH incl. 5 textile discs HA ampoules 50%RH incl. 5 textile discs HA ampoules 80%RH incl. 5 textile discs HA ampoules 95%RH incl. 5 textile discs HA Chapter 5 Page 53

54 Pressure info Pressure For more than ten years Regin has been a distributor for Huba Control, one of the world s leading manufacturers of pressure transmitters and pressure switches. Besides the products from Huba we offer additional products to complete the range. Thus we are able to offer a complete range of highquality products at competitive prices. Differential pressure transmitter 55 Pressure switch 56 Differential pressure transmitter for air 57 Differential pressure transmitter for liquids 58 Pressure transmitter 59 Controllers, analogue 56 Controllers, digital Chapter 6 Page 54 Chapter

55 Pressure Differential pressure transmitter with display Pressure Microprocessor controlled differential pressure transmitter type DMD for measuring air and neutral gases. DMD has 4 different measuring ranges in the same unit, Pa, Pa, Pa, and The range is selected by means of buttons under the cover. Other functions are zeropoint adjustment and electronic damping. Supplied with 2 m hose and two pressure outlets. Communication DMD-LON is ready for connection to LonWorks network. DMD-LON has network variables corresponding to the Lon-Mark guidelines. Output V and ma, selectable Working range Pa, Pa, Pa and Pa, selectable 24 V AC Accuracy Better than +/-1%, at 20 C Electronic damping s Display LED, 3 digits IP54 Differential pressure transmitter DMD Differential pressure transmitter with LonWorks DMD-LON Pressure controller with display, Wall-mounting A complete micro-processor controlled pressure controller with sensor and controller of DMD-C type for controlling dampers, frequency convertors,vav systems, gases etc. DMD-C has 4 different measuring ranges in the same unit, Pa, Pa, Pa, and Pa. The range is selected by means of buttons under the cover. Supplied complete with 2 m hose and 2 pressure outlets. Output (pressure) V or ma Output (controller) V Working range Pa, Pa, Pa and Pa, selectable 24 V AC Accuracy +/-1%, at 20 C P-band % I-time s D-factor Electronic damping s Display LED, 3 digits IP54 Pressure controller DMD-C Chapter 6 Page 55

56 Pressure Controller Analogue input/output DIN-mounting Universal controllers for analogue signal. For example from humidity-, temperature- or pressure transmitters. AQUA24A1A/D is settable for P or PI control and has adjustable P band and I-time. The output signal is reversible, e.g. it can be set for direct- or reverse function (for example humidifying or dehumidifying). SPC input gives the possibility to shift the setpoint. Can be used with display unit, type DSP24A1/D. Output signal One, V Input One, V 24 V AC Setpoint % RH, and input for external setpoint adjustment V P-band 0, % I-time 10 s...10 min IP20 Controller, % (universal) AQUA24A1A/D Controller, range Pa AQUA24A1P3/D Controller, range Pa AQUA24A1P5/D Controller, range Pa AQUA24A1P10/D Controller, range kpa AQUA24A1P600/D Differential pressure switch, for air and noncorrosive gases Differential pressure switch for air and non-corrosive gases.relay contact data 250 V AC 5 A, change-over. Working range Pa DTV Pa DTV Pa DTV Pa DTV Pa DTV5000 Accessories 2 m hose and two pressure outlets ANS Page 56 Chapter

57 Pressure Differential pressure transmitter Differential pressure transmitter for air and non-corrosive gases. Working range Output signal Pa, V V DTL05/ Pa, ma ma DTL05/ Pa, V V DTL Pa, ma ma DTL Pa, V V DTL Pa, ma ma DTL Pa, V V DTL Pa, ma ma DTL Pa, V V DTL Pa, ma ma DTL Pa, V V DTL Pa, ma ma DTL Pa, V V DTL Pa, ma ma DTL Pa, V V DTL Pa, ma ma DTL All transmitters above are available in display version (LCD). N.B. Not stock line! DTL...-D Accessories 2 m hose and two pressure outlets ANS Calibration certificate DTL-series can be ordered with calibration certificate. For constructions with higher calibration demands. CCERT-H Chapter 6 Page 57

58 Pressure Differential pressure transmitter For liquids and gases Differential pressure transmitter for measuring liquids (also glycol blended) and gases (not ammonia). The measuring element is made of a ceramic material that gives good stability and measuring accuracy. Output V or ma (two-wire) 24 V AC / V DC (output V) V DC, 2-wire (output ma) Accuracy +/-1,3% fs (DTK10...DTK250) +/-0,8% fs (DTK400) +/-0,5% fs (DTK600...DTK2500) AMbient temperature C Connection Screw fitting for pipe Ø 6 mm IP65 Working rangeoutput signal Max overload (one side) kpa V 60 kpa DTK kpa ma 60 kpa DTK kpa V 120 kpa DTK kpa ma 120 kpa DTK kpa V 200 kpa DTK kpa ma 200 kpa DTK kpa V 500 kpa DTK kpa ma 500 kpa DTK kpa V 1200 kpa DTK kpa ma 1200 kpa DTK kpa V 1200 kpa DTK kpa ma 1200 kpa DTK kpa V 1200 kpa DTK kpa ma 1200 kpa DTK kpa V 2000 kpa DTK kpa ma 2000 kpa DTK kpa V 3200 kpa DTK kpa ma 3200 kpa DTK kpa V 5000 kpa DTK kpa ma 5000 kpa DTK Accessories Nipple (R=1/8 27NPT") for connection of Ø 6 mm copper pipe Copper pipe Ø 6 mm, length 30 cm DTK-Nippel DTK-R Page 58 Chapter

59 Pressure Pressure transmitter Pressure transmitter for liquids (also glycol blended) and gases (not ammonia). Can also be delivered with other specifications, for example with absolute pressure. For further information, please see our product sheet. Output V or ma (two-wire) 24 V AC / V DC (output V) V DC, 2-wire (output ma) Accuracy +/- 0.3% Connection R1/4" (R1/2" can be ordered) Sealing EPDM Temperature range C (* 1 IP65 Working range Output kpa V TTK kpa ma TTK Pa V TTK Pa ma TTK kpa V TTK Pa ma TTK Pa V TTK Pa ma TTK kpa V TTK kpa ma TTK kpa V TTK kpa ma TTK kpa V TTK kpa ma TTK MPa (100bar) V TTK MPa (100bar) ma TTK MPa (160bar) V TTK MPa (160bar) ma TTK MPa (250bar) V TTK MPa (250bar) ma TTK MPa (400bar) V TTK MPa (400bar) ma TTK MPa (600bar) V TTK MPa (600bar) ma TTK Accessories * 1 ) When using higher media temperatures than the sensor can handle, this mounting spacer lowers the temperature. Adapter for transforming 1/4" to 1/2" ADAPTER Chapter 6 Page 59

60 Air velocity- and CO 2 -transmitters Our air-velocity sensors work on the principle of measuring the rate of cooling heated elements. The measuring elements are very thin plates with special surface treatment to eliminate the accumulation of dust etc Regin markets high quality CO 2 transmitters intended for wall and duct mounting. CO 2 transmitters for room mounting 61 CO 2 transmitters for duct mounting 61 Air-velocity sensor 61 Chapter 7 Page 60 Chapter

61 Air velocity- and Carbon dioxide-transmitters Air velocity transmitter Air velocity- and Carbon dioxide-transmitters For measuring air velocity in ventilation ducts. Specially designed thin film sensor elements with high degree of mechanical and electrical repeatability. The working range can be selected by means of a jumper on the circuit board. Working range m/s, m/s, m/s 24 V AC +/- 20% Output V (Max. 1mA), ma Time constant 1.5 s at 10 m/s Accuracy +/-(0.3 m/s +3% of value), at m/s +/-(0.3 m/s +3% of value), at m/s +/-(0.3 m/s +4% of value), at m/s Damping 0.2 or 2 sec. selectable Ambient temperature Insertion length mm (adjustable) IP65 Air velocity transmitter AVDT Air velocity/temperature transmitter Sensor in combination-model with air velocity/temperature. This sensor also has a higher accuracy than the AVDT 21 model. Output V, available as ma model 24 V DC +/- 20 % Accuracy air velocity +/ % of value Accuracy temp +/- 0.5% Ambient temperature C IP65 Combination transmitter, m/s, C Combination transmitter, m/s, C Combination transmitter, m/s, C AVDT32* AVDT310* AVDT320* *= N.B. AVDT are not stock line products Carbon dioxide (CO2 ) transmitter, Wall mounting Carbon dioxide (CO2 ) transmitter, Duct mounting Measures the concentration of carbon dioxide in rooms or ducts. CO2RT... and CO2DT... are available in models with or without display and relay that can be set for closing at a certain CO2 content. CO2DT model is intended for duct mounting. Venturi tube is included and only one aperture is needed. Working range ppm or ppm Output V or ma, selectable 24 V AC, V DC Relay output (...R-models) closing contact, 0.5 A 24 V AC/DC Switching point settable in 100 ppm steps. Accuracy ppm +/-75 ppm, >1500 ppm +/-5% IP20 (CO2RT... models) IP54 (CO2DT... models) Room transmitter, ppm CO2RT Room transmitter, ppm, with LCD-display and relay CO2RT-DR Room transmitter, ppm CO2RT-5 Room transmitter, ppm, with LCD-display and relay CO2RT-5DR Duct transmitter, ppm CO2DT Duct transmitter, ppm, with LCD-display and relay CO2DT-DR Duct transmitter, ppm CO2DT-5 Duct transmitter, ppm, with LCD-display and relay CO2DT-5DR Chapter 7 Page 61

62 Detector info Detectors Regin has a complete range of smoke detectors, both for duct mounting and for mounting on ceilings, with or without service alarm and auxiliary fan. They come in two types, ionisation or optical. Smoke detector for duct mounting 57 Smoke detectors for ceiling mounting 57 Control unit for smoke detectors 57 Presence detectors 58 Accessories 58 Chapter 8 Page 62 Chapter

63 Detectors Smoke detectors For duct mounting Detectors Single pipe smoke detectors for duct mounting Power consumption V DC (via alarm unit, ABV...) 0.14 ma, 50 ma (alarm) IP54 Ionisation duct detector Standard model SDD-S with service alarm SDD-S with built-in relay (24V) SDD-S60-R with auxiliary fan SDD-S60-M with auxiliary fan and service alarm SDD-S50-M Optical duct detector Standard model SDD-OE with auxiliary fan and service alarm SDD-OE50-M Accessories Mounting spacer for insulated pipe ducts TDS Smoke detectors For ceiling mounting Smoke detectors for ceiling mounting V DC (via alarm unit, ABV...) Power consumption 0.14 ma, 50 ma (alarm) IP20 Ionisation ceiling detector Standard model S with service alarm S Optical ceiling detector Standard model S60-OE with service alarm S50-OE Accessories Socket to S50 and S60-detectors S-BP Socket to S50 and S60-detectors with built in changing relay (24 V) S-BPR Alarm units for the SDD-, S50 and S-60 series. Provides power supply and alarm handling for service detectors with or without service alarm. Intended for DIN-rail mounting. Alarm unit Power consumption Alarm outputs ABV...-S-300/D ABV /D 24 V AC or 230V AC 30 ma (70 ma on alarm) One (1) changing contact (smoke) One (1) closing contact (smoke) One (1) closing contact (service) Two (2) changing contacts (smoke alarms) IP20 Alarm unit, 24 V AC ABV24-300/D Alarm unit, 24 V AC, with service alarm ABV24-S-300/D Alarm unit, 230 V AC ABV-300/D Alarm unit, 230 V AC, with service alarm ABV-S-300/D Accessories Housing in plastic. Room for one control unit ABV /D above. EK Chapter 8 Page 63

64 Detectors Presence detector Wall/Ceiling mounting A detector that gives a signal when someone is present in the room under supervision. The detector has a pulse detecting function that minimizes the risk for false alarm. Settable output on/off delay. Alarm output Power consumption Temperature range Working area Ambient humidity 24 V AC/DC 200 ma 24 V DC, changing contact 15 ma -20 to +50 C 15 x 15 m, 110 angle Max. 95 % RH IP20 Presence detector IR24-P Page 64 Chapter

65 Actuators and Valves Valve actuators Regin supplies everything from smaller thermal actuators to micro-processor controlled actuators for control valves. Control valves Regin has a broad range of two and three way valves from kvs 0.25 to 360. The programme contains various models from smaller zone valves to flanged control valves for district heating. Zone valves, PN10 and thermal actuators Zone valves, PN16, kv 0,25...6,3 68 Control valves, kv 0, Flanged valves, kv Actuators for control valves Actuators for flanged valves 64, 67 Chapter Chapter 9 Page 65

66 Thermal actuators - zone valves Thermal actuator Thermal actuators - zone valves Thermal actuators designed for the valve series FVR and VHR. The actuators used together with any of the valves below, are suitable for radiator circuits, solar heating systems, heating or cooling coils, for floor heating etc. Control signal (VMA24) Power consumption Closing time Force Stroke Ambient temperature 24 V AC/DC or 230 V AC V 24 V 70 ma, start-up 200 ma 230 V 8 ma, start-up 300 ma Approx. 2.5 min. 100 Nm 4 mm C IP43 Thermal actuator, 24V AC/DC for valve type FVR...and VHR... VMC Thermal actuator, 230 V AC for valve type FVR...and VHR... VMC230 Thermal actuator, V, for valve type FVR...and VHR... VMA24 Adapters Adapters to adapt the VMA24 and VMC-actuators to other valve brands. Intended for Connection Honeywell/TA/Heimeier M30x1.5 FVR-HWN Danfoss Diam 26 FVR-RAVL Danfoss Diam 34 FVR-RAV Danfoss Diam 23 FVR-RAN TA M28x1.5 FVR-RVT TA M28x1.5 FVR-TRV 2-way valve 2-way zone-valve to be used with the VMA24- or VMC... actuator. Adjustable KV-value (see below) Fluid temperature C Kv Kv (FVR ) Pressure rating PN10 Max. diff. pressure 150 kpa Stroke 1.7 mm 2-way 3/8", (DN10) FVR way 1/2", (DN15) FVR15 2-way 3/4", (DN20) FVR20 Valve connections, see overleaf 2-way valve 2-way zone-valve to be used with the VMC/VMA actuator. Fluid temperature C Kv 0.7 (VHR25 Kv 1.5) Max diff pressure 80 kpa Max closing pressure 250 kpa, DN kpa Stroke 1.7 mm Pressure rating PN10 2-way valve 3/8", (DN10) VHR way valve 1/2". (DN15) VHR15 2-way valve 1", (DN25) VHR25 Valve connections, see overleaf Page 66 Chapter

67 Accessories and complete valve/actuator combinations Valve connections, to FVR-valves Accessories and complete valve/actuator combinations Type Connection Tail and nut 3/8" Tail and nut 1/2" Tail and nut 3/4" Nut and olive 3/8" Nut and olive 1/2" Connection inlet Fitting for valve inlet, to FVR-valves Type Connection Male nut and olive 3/8" Male nut and olive 3/8" Male nut and olive 1/2" Male nut and olive 1/2" Male nut and olive 1/2" Valve complete with actuator BFCM fan coil valve is intended for On/Off control of hot or cold water in heating and cooling HVAC systems. It features a synchronous motor and is equipped with spring return mechanism. Control signal Opening time Closing time (spring) Fluid temperature Pressure rating Connection Body material (valve) Housing material 230 V AC On/Off seconds seconds C PN16 Female threaded BSP Forged brass Plastic IP44 Connection Kv Max. diff. pressure 2-way, DN15 Kv kPa BFCM way, DN20 Kv kPa BFCM way, DN25 Kv kPa BFCM way, DN15 Kv kPa BFCM way, DN20 Kv kPa BFCM way, DN25 Kv kPa BFCM Chapter 9 Page 67

68 Zone valves - Actuators Valve actuator Zone valves - Actuators Actuator series designed for two & three way zone valves type VST and VMT. Control signal Power consumption Force Stroke Stroke time Cable length 24 V AC 3-point or V 0.5 VA 200 N 6.5 mm 18 s. / mm (50 Hz) 1.5 m IP43 Valve actuator, 3-point floating control MVT Valve actuator, V MVT57 General technical data for zone valves below. Zone valve 2-way kv Zone valve 3-way kv Valve flow type Linear Fluid temperature C Media Water (mixed with glycol, max 50%) Connection Outside thread, (N.B. VSBT/VMBT, inside thread 3/4") Rangeability 50:1 Material housing Brass (VSBT and VMBT has housing in cast iron) Stroke 5.5mm Pressure rating PN16 Connection Max diff. pressure kv 2-way valve, DN kpa kv 0.25 VST way valve, DN kpa kv 0.40 VST10 2-way valve, DN kpa kv 0.6 VST11 2-way valve, DN kpa kv 1.0 VST12 2-way valve, DN kpa kv 1.6 VST13 2-way valve, DN kpa kv 2.5 VST1 2-way valve, DN kpa kv 4.0 VST2 2-way valve, DN kpa kv 6.3 VSBT3 Connection Max diff. pressure kv 3-way valve, DN kpa kv 0.25 VMT way valve, DN kpa kv 0.40 VMT10 3-way valve, DN kpa kv 0.6 VMT11 3-way valve, DN kpa kv 1.0 VMT12 3-way valve, DN kpa kv 1.6 VMT13 3-way valve, DN kpa kv 2.5 VMT1 3-way valve, DN kpa kv 4.0 VMT2 3-way valve, DN kpa kv 6.3 VMBT3 Page 68 Chapter

69 Control valves - actuators Valve actuator Control valves - actuators Microprocessor based actuator series designed for 2- or 3-way control valves STV/STR. The actuator works with 15 mm stroke in use with valves below. Auto stroking and zero and span function. Intended for 3-point (increase/decrease) or V control signal. Control signals Ambient temperature Power consumption Force Stroke Stroke time 24 V AC (also 30 V DC AQM2000A-1R) V or 3-point C 4 VA 450 N 20 mm 3,5 s / mm (AQT...) 3 s / mm (AQM...) IP54 Valve actuator, 3-point floating control AQT1000A-1R Valve actuator, V AQM2000A-1R General technical data for zone valves below. 2-way and 3-way valves intended for use in heating and ventilation systems. Suitable for cold/hot water and steam. The valves can be changed from 2-ways to 3-ways and vice-versa without dismantling. Valve flow type Square Fluid temperature C Media Hot, cold, glycol mixed water or steam Connection Metric female threaded Rangeability 50:1 Stroke 15 mm Pressure rating PN16 Material Body Rg5 (red metal SS 5204) Plug Rg5 (red metal SS 5204) Stem Stainless steel Packing box Auto adjusted, teflon (O-ring Viton) Control valve 2-way Control valve Connection Max diff. pressure kv 2-way valve, DN MPa kv 0.63 STV15-0, way valve, DN MPa kv 1.0 STV15-1,0 2-way valve, DN MPa kv 1.6 STV15-1,6 2-way valve, DN MPa kv 2.1 STV15-2,1 2-way valve, DN MPa kv 2.7 STV15-2,7 2-way valve, DN MPa kv 4.2 STV20-4,2 2-way valve, DN MPa kv 5.6 STV20-5,6 2-way valve, DN MPa kv 10 STV way valve, DN MPa kv 16 STV way valve, DN MPa kv 27 STV way valve, DN50 0,25 MPa kv 39 STV50-39 Type, Connection Max diff. pressure kv 3-way valve, DN MPa kv 0.63 STR15-0, way valve, DN MPa kv 1.0 STR15-1,0 3-way valve, DN MPa kv 1.6 STR15-1,6 3-way valve, DN MPa kv 2.1 STR15-2,1 3-way valve, DN MPa kv 2.7 STR15-2,7 3-way valve, DN MPa kv 4.2 STR20-4,2 3-way valve, DN MPa kv 5.6 STR20-5,6 3-way valve, DN MPa kv 10 STR way valve, DN MPa kv 16 STR way valve, DN MPa kv 27 STR way valve, DN50 0,25 MPa kv 39 STR Chapter 9 Page 69

70 Control valves - actuators Valve actuator Actuator series designed for two & three way control valves MTVS.../MTRS... and GTVS... and GTRS... together with adapter-kit OVA-B1 or OVA-B2. Control signal Power consumption Force, NV... Force, AV... Stroke, NV... Stroke, NV V AC V or 3-point 5 VA, (AV24-MFT= 7 VA) 800 N 2000 N mm mm IP54 Stroke time Valve actuator, 3-point 7.5 sec. NV24-3 +UNV Valve actuator, V 35 sec. NVY24-MFT+UNV Valve actuator, 3-point 8 sec./min. AV24-3-R+ZAV Valve actuator, V 320 sec. AV24-MFT2-R+ZAV The valves below are intended for use together with adapter OVA-B1 to actuator NV24-3+UNV010 and NV24-MFT2+UNV010 for use in heating and ventilation systems. Suitable for cold/hot water and steam. The valves can be changed from 2-ways to 3-ways and vice-versa without dismantling. Valve flow type Square Fluid temperature C Media Hot, cold, glycol mixed water or steam Connection Metric female threaded Rangeability 50:1 Stroke 20 mm Pressure rating PN16 Material Body Rg5 (red metal SS 5204) Plug Rg5 (red metal SS 5204) Stem Stainless steel Packing box Auto adjusted, teflon (O-ring Viton) Control valve 2-way Control valve 3-way Connection Max diff. pressure kv Actuator + Adaptor kit 2-way valve, DN MPa kv 0.63 NV...+ OVA-B1 MTVS15-0, way valve, DN MPa kv 1.0 NV...+ OVA-B1 MTVS15-1,0 2-way valve, DN MPa kv 1.6 NV...+ OVA-B1 MTVS15-1,6 2-way valve, DN MPa kv 2.1 NV...+ OVA-B1 MTVS15-2,1 2-way valve, DN MPa kv 2.7 NV...+ OVA-B1 MTVS15-2,7 2-way valve, DN MPa kv 4.2 NV...+ OVA-B1 MTVS20-4,2 2-way valve, DN MPa kv 5.6 NV...+ OVA-B1 MTVS20-5,6 2-way valve, DN MPa kv 10 NV...+ OVA-B1 MTVS way valve, DN MPa kv 16 NV...+ OVA-B1 MTVS way valve, DN MPa kv 27 NV...+ OVA-B1 MTVS way valve, DN MPa kv 39 NV...+ OVA-B1 MTVS50-39 Type, Connection Max diff. pressure kv 3-way valve, DN MPa kv 0.63 NV...+ OVA-B1 MTRS15-0, way valve, DN MPa kv 1.0 NV...+ OVA-B1 MTRS15-1,0 3-way valve, DN MPa kv 1.6 NV...+ OVA-B1 MTRS15-1,6 3-way valve, DN MPa kv 2.1 NV...+ OVA-B1 MTRS15-2,1 3-way valve, DN MPa kv 2.7 NV...+ OVA-B1 MTRS15-2,7 3-way valve, DN MPa kv 4.2 NV...+ OVA-B1 MTRS20-4,2 3-way valve, DN MPa kv 5.6 NV...+ OVA-B1 MTRS20-5,6 3-way valve, DN MPa kv 10 NV...+ OVA-B1 MTRS way valve, DN MPa kv 16 NV...+ OVA-B1 MTRS way valve, DN MPa kv 27 NV...+ OVA-B1 MTRS way valve, DN MPa kv 39 NV...+ OVA-B1 MTRS50-39 Page 70 Chapter

71 Adapters and Flanged valves Adapter-kit Adapters and Flanged valves Adapter-kits for adaptation of our valves to actuators from other suppliers. Adapter + stem extension is included in the kit. For valve series Actuator supplier Actuator model MTVS/MTRS... & GTVS/GTRS... Belimo NV... OVA-B1 GTVS.../GTRS... Belimo AV... OVA-B2 TAC Forta M400 / M800 OVA-T1 Siemens All OVA-SI Controlli MVL... OVA-C1 Valves intended for continuous control of cold/hot water and steam. The valves can be changed from 2-ways to 3-ways and vice-versa without dismantling. The valves are intended for use with actuators NV24... or AV24... on page 46. Adapter-kit OVA-B1 or OVA-B2 shall be used, see table below. Flanged valve 2-way kv Flanged valve 3-way kv Valve flow type Square Media Hot, cold, glycol mixed water or steam Fluid temperature 120 C Max. leakage 0.1% of Kvs Rangeability 50:1 Pressure rating PN16 Material Body Cast iron SS 0120 Plug & seat Gun metal SS 5204 Stem, cone Stainless steel SS 2346 Packing box Self-adjusting teflon O-ring Viton Bonnet Brass SS 5170 Seal flange Steel SS 2172 Connection 2-way Kv Max diff. pressure Stroke *ActuatorAdapter-kit DN MPa 20 mm NV... OVA-B1 BGTV DN MPa 20 mm NV... OVA-B1 BGTV32-16 DN MPa 20 mm NV... OVA-B1 BGTV40-27 DN MPa 37 mm AV... OVA-B2 BGTV50-39 DN MPa 24 mm AV... OVA-B2 BGTV65-63 DN MPa 36 mm AV... OVA-B2 BGTV DN MPa 36 mm AV... OVA-B2 BGTV DN MPa 40 mm AV... OVA-B2 BGTV DN MPa 40 mm AV... OVA-B2 BGTV Connection 3-way Kv Max diff. pressure Stroke *ActuatorAdapter-kit DN MPa 37 mm AV... OVA-B2 BGTR DN MPa 24 mm AV... OVA-B2 BGTR65-63 DN MPa 36 mm AV... OVA-B2 BGTR DN MPa 36 mm AV... OVA-B2 BGTR DN MPa 40 mm AV... OVA-B2 BGTR DN MPa 40 mm AV... OVA-B2 BGTR *)= Intended for actuator of this model N.B. The valves in the list above are available in other materials with temp. range up to 185 C Chapter 9 Page 71

72 District heating valves District heating valve kv PN16 District heating valves 2SAS- and 2SBS-valves are intended for cold and hot water within a temperature range of -5 C to +185 C. N.B. The valves from connection 20. type N2SB, are pressure balanced and are thereby able to handle differential pressures with low force. The valve is delivered with lock nut for both stem and bonnet. Intended for use with actuator NV... or AV... together with appropriate adaptor-kit. Valve flow type Square Max diff. pressure 1.6 MPa Stroke 20 mm (B2SB = 38 mm) Fluid temperature C Media Hot, cold, glycol mixed water or steam Rangeability 50:1 Max. leakage 0.1% of Kv Pressure rating PN16 Material Body Nodular iron SS 0727 Cone, seat and Stainless steel SS 2333 lining Stem Stainless steel SS 2346 Packing box Self-adjusting teflon O-rings Viton Connection Kv *Actuator Adapter-kit 2-way, DN AQT/AQM OVA-B1 N2SA15-0, way, DN AQT/AQM OVA-B1 N2SA15-1,0 2-way, DN AQT/AQM OVA-B1 N2SA15-1,6 2-way, DN AQT/AQM OVA-B1 N2SA way, DN AQT/AQM OVA-B1 N2SB20-3, way, DN AQT/AQM OVA-B1 N2SB20-6,3 2-way, DN25 10 AQT/AQM OVA-B1 N2SB way, DN32 16 AQT/AQM OVA-B1 N2SB way, DN40 27 AQT/AQM OVA-B1 N2SB way, DN50 39 NV... OVA-B1 B2SB way, DN65 63 NV... OVA-B1 B2SB way, DN NV... OVA-B1 B2SB way, DN AV... OVA-B2 B2SB *)= Intended for actuator of this model Page 72 Chapter

73 District heating valves District heating valve kv 0, PN25 CVFS-valves are intended for use together with actuator AV... for cold and hot water within a temperature range of -5 C to +185 C. N.B. The valves from connection DN25 are pressure balanced and are thereby able to handle differential pressures with low force. Intended for use with actuator NV... or AV... together with appropriate adaptor-kit, see table below. Valve flow type Square Max diff. pressure 2.5 MPa Stroke 32 mm Fluid temperature C Media Hot, cold, glycol mixed water or steam Connection Flanges according to SS335 table 6 Rangeability 50:1 Max. leakage 0.1% of Kvs Pressure rating PN25 Material Body Nodular iron SS 0727 Plug and seat Stainless steel SS 2333 Stem and pin Stainless steel SS 2346 Packing box Self-adjusting teflon O-rings Viton Piston-ring PTFE reinforced with carbon Lining and filter Stainless steel SS 2333 Connection Kv Suitable actuator + Adapter-kit 2-way, DN AV...+OVA-B2 CVFS20-0,8 2-way, DN AV...+OVA-B2 CVFS20-1,6 2-way, DN AV...+OVA-B2 CVFS20-2,5 2-way, DN AV...+OVA-B2 CVFS25-4,0 2--way, DN AV...+OVA-B2 CVFS32-6,3 2-way, DN40 10 AV...+OVA-B2 CVFS way, DN50 16 AV...+OVA-B2 CVFS way, DN65 25 AV...+OVA-B2 CVFS Chapter 9 Page 73

74 Actuators Valve actuatorfor Siemens valves TAC valves Osby valves Actuators Actuator intended to control 2- and 3-way valves. The actuator can be used together with other valve brands when adapters below are used. Control signal Power consumption Force Stroke Full stroke time 24V AC 50 / 60 Hz, 24 V DC 3-point or V 3 W 800 N 20 mm 35 sec. ( V), 7.5 sec. (3-point) IP54 Model Intended for valve types 3-point Siemens (Landis & Staefa) NV24-3+UNV V Siemens (Landis & Staefa) NVY24-MFT+UNV010 Adapter-kits for actuator NV24...+UNV010 Manufacturer / Model Connection (DN) Osby MTVS/MTRS OVA-B1 Siemens VVF21 / VXF21 / VV31 / VXF31 20/ UNV-003 VVF41 / VXF (80) UNV-003 VVF52 / VPF UNV-003 VVF61 / VXF61 15/25 UNV-003 VFG35 VVG11 / VXG UNV-003 TAC V231 / V232 / V241 / V UNV-017 V294* 2 / V394* 2 / V282* 2 / V384* 2 / V386* 2 Max 32 UNV-017 V292* 2 / V392* 2 / V353 Max 32 UNV-017 * 1 =The addition UNV010 means that the actuator has longer bracket. * 2 = For connection DN15 a separate mounting kit from TAC is needed. (art. no ) Newer valves from OsbyArmatur have stem with M8-thread. Older valves from Osby Armatur have different stem-thread. Adapter can be ordered. Valve actuator NRDVX Actuator intended for controlling Siemens 2- and 3-way valves. Model Intended for valve types 3-point Siemens valve with 5.5 mm stroke (see table below) NRDVX24-3-T V Siemens valve with 5.5 mm stroke (see table below) NRDVX24-SR-T-SI 1810 Intended for Siemens valves below VVG11.15, VXG 11.15, VVG44, VXG44 VVG55, VV152 VV152 Page 74 Chapter

75 Damper actuator info Damper actuators Regin has a complete range of damper actuators. The damper actuators are supplied in different models from 4 Nm to 30 Nm with or without spring-return. Damper actuators Chapter Chap. 10 Page 75

76 Damper actuators Damper actuator 5 Nm No spring return Damper actuators Mounting Directly on jack shaft For jack shaft mm Ø (round shaft) mm, (square shaft) Max damper size 1.0 m² Torque 5 Nm IP54 Control signal Running time Features On/off 230 V AC s RDA On/off 230 V AC s Auxiliary switch RDA5-230S 3-point 24 V AC/DC s RDA5-24T 3-point 24 V AC/DC s Auxiliary switch RDA5-24TS V (* 24 V AC/DC s RDA5-24A Damper actuator 5 Nm Spring return Mounting Directly on jack shaft For jack shaft mm Ø (round shaft) mm, (square shaft) Max damper size 1.0 m² Torque 5 Nm IP54 Control signal Features On/off 230 V AC Spring return RDA5S-230 On/off 230 V AC Spring return, Auxiliary switch RDA5S-230S 3-point 24 V AC/DC Spring return RDA5S-24T 3-point 24 V AC/DC Spring return, Auxiliary switch RDA5S-24TS V (* 24 V AC/DC Spring return RDA5S-24A Damper actuator 8 Nm No spring return Mounting Directly on jack shaft For jack shaft mm Ø (round shaft) mm, (square shaft) Max damper size 1.6 m² Torque 8 Nm IP54 Control signal Running time On/off 230 V s RDA xxx 3-point 24 V s RDA8-24T V (* 24 V s RDA8-24A Damper actuator 15 Nm No spring return Mounting Directly on jack shaft For jack shaft mm Ø (round shaft) mm, (square shaft) Max damper size 3.0 m² Torque 15 Nm IP54 Control signal On/off 24 V AC/DC RDA xxx On/off 230 V AC RDA V (* 24 V AC/DC RDA15-24A (* = All damper actuators above with analogue V control signal, have V working range. Page 76 Chapter

77 Damper actuators Damper actuator 20 Nm No spring return Mounting Directly on jack shaft For jack shaft mm Ø (round shaft) mm, (square shaft) Max damper size 4 m² Torque 20 Nm IP54 Control signal Running time On/off 24 V 150 s RDA On/off 230 V 150 s RDA V (* 24 V 150 s RDA20-24A Damper actuator 30 Nm No spring return Mounting Directly on jack shaft For jack shaft mm Ø (round shaft) mm, (square shaft) Max damper size 6 m² Torque 30 Nm IP54 Control signal Running time On/off 24 V 230 s RDA On/off 230 V 230 s RDA V (* 24 V 230 s RDA30-24A Damper actuator 15 Nm Spring return Mounting Directly on jack shaft For jack shaft mm Ø (round shaft) mm, (square shaft) Max damper size 3 m² Torque 15 Nm IP54 Control sign. Supply volt. Running time Features On/off 24 V 150 s Spring return, approx. 20 s RDA15S On/off 230 V 150 s Spring return, approx. 20 s RDA15S V (* 24 V 150 s Spring return, approx. 20 s RDA15S-24A (* = All damper actuators above with analogue V control signal, have V working range Chapter 10 Page 77

78 Accessories Filter manometers 80 Duct manometers 80 Magnet tester 79 Rotation sentinels 79 Chapter Chap. 11 Page 78