Bennett Pump Company

Transcription

1 Bennett Pump Company 3100 / 3500 Series Spec. 100 (2nd Generation) Commercial & Retail Parts Manual Only Trained Personnel May Work on This Equipment Includes Parts For: Model 3100 Commercial Mechanical 101 (Volume Only) Non-computer with Electric or Cam-AC Reset Model 3500 Retail Mechanical (Money & Volume) V/R 10 with Electric or Cam-AC Reset Remote Dispensers and Self-Contained Pumps READ THIS MANUAL For new manuals, FAX to: BENNETT MARKETING SERVICES (231) or visit our web page at: Rev B Bennett 1218 E. Pontaluna Road, Spring Lake, MI USA ~ Outside USA sales@bennettpump.com ~

2 Table of Contents Introduction 3 How to Place and Order 3 Model and Serial Number Identification 4 FRAME HYDRAULICS Low Hose Interior Frame 5 Low Hose Exterior Frame 7 High Hose Interior Frame 9 High Hose Exterior Frame 11 Ballast Box 13 Product Ad Panels 14 Standard Low Hose Remote Hydraulics 15 Standard High Hose Remote Hydraulics 16 Standard Low Hose Suction Hydraulics 17 Standard High Hose Suction Hydraulics 18 Hydraulics Hardware Table 19 SB-100 Meter Assembly 20 T-75 Pumping Unit Assembly 22 COMPUTERS & NON-COMPUTERS Mechanical Computers & Non-Computers 25 Electric Reset Breakdown 28 Handle Linkage Parts 31 CAM-AC Parts 32 MISCELLANEOUS Field Installation Kits 33 Bennett Limited Warranty for Products Installed in the United States 34 Bennett International Limited Warranty for Dispensers and Pumps Rev B

3 Introduction INTRODUCTION This manual shows common service parts for 3100 Series Commercial suction pumps/remote dispensers, and 3500 Series Retail suction pumps/remote dispensers. Refer to 3000 Series Mechanical Commercial / Retail Dispenser Installation Manual # FAX YOUR ORDER TO: To Place an Order MAIL YOUR ORDER TO: BENNETT PUMP COMPANY 1218 E. PONTALUNA RD. SPRING LAKE, MI CALL: For USA ONLY Outside USA ALL ORDERS MUST INCLUDE: THE PART NUMBER, DESCRIPTION, AND QUANTITY REQUIRED. THE COMPLETE SHIP TO ADDRESS YOUR COMPANY S NAME AND ADDRESS (IF DIFFERENT FROM THE SHIPPING DESTINATION) FOR BILLING PURPOSES Rev B

4 Model & Serial Plate Identification ** FURNISH COMPLETE MODEL, SPEC., SERIAL NUMBER, INCLUDING DATE CODE WHEN ORDERING PARTS. THE SERIAL TAG IS LOCATED INSIDE THE UPPER CABINET ON THE DECK: SIDE ONE. SPECIFICATION # BUILT 1P (JAN. 2012) YEAR LETTER CODE 2007 J 2008 K 2009 L 2010 M 2011 N 2012 P Rev B

5 Low Hose Frame: Interior Rev B

6 Low Hose Frame: Interior Ref. No. Part No. Description Quantity Lamp, Fluorescent; F17t8sp35rs End Plate Frame, 3k, Hosereel/Nozzleboot End Plate Frame, 3k, Blank Rain Lip, 3000, Black Rain Lip, 3000, Stainless Steel Clock Deck Bracket Hose Support, 3k, Right Bracket Hose Support, 3k, Left Deck, Pumping Units, 3k Deck, Remote, Single/Twin 3k Mount, Pumping Unit & Motor Upright, Low Hose, 3k Base Frame 3k Rev B

7 Low Hose Frame: Exterior Rev B

8 Low Hose Frame: Exterior Ref. No. Part No. Description Quantity Lock Assm. (Includes Screws, Lw, Nuts, 2 Keys, & Cam) Up to Key-Cut Cover Pump Top - Lh; Mech. Black Cover Pump Top - Lh; Mech. White Cover Pump Top - Lh; Mech. Stainless Steel Cover Pump Top - Lh; Mech. Khaki Cover, Computer, Gallons - Left: Volume Only Cover, Computer, Gallons - Right: Volume Only Cover, Computer, Gallons - Twin: Volume Only Cover, Computer, Gallons - Left: Retail Cover, Computer, Gallons - Right: Retail Cover, Computer, Gallons - Twin: Retail End Panel, Lh, Mechanical - Black (Not Shown) End Panel, Lh, Mechanical - Stainless End Panel, Lh, Mechanical - White (Consult Factor For Subsequent Colors: ) Hinge; 1.50 X 5.0 Black Finish Hinge; 1.25 X 2.0, Lh, Stainless 6 Product I.D. Ad Panels. See Page Door, 3000, Blank - Black Door, 3000, Blank - Green Door, 3000, Blank - Red Door, 3000, Blank - Stainless Steel Door, 3000, Blank - Blue Door, 3000, Blank - White Door, 3000, Blank - Yellow 8 N Elbow-Painted 2 9 N Nozzle Hook End Stops, Ad Panels 2.88 X 1.38 Black End Stops, Ad Panels 2.88 X 1.38 Stainless 11 J Hose Hook Door, Upper, Mechanical, 3k Black Door, Upper, Mechanical, 3k Stainless Double Sided Tape, 3k, Mech-Up Door (Not Shown) 4 per 13 J Handle Stop 4 14 H Handle Reset Lens, Mechanical Display Rev B

9 High Hose Frame: Interior Rev B

10 High Hose Frame: Interior Ref. No. Part No. Description Quantity Upright, High Hose, 3000 Pump End Frame, High Hose, 3000: Black End Frame, High Hose, 3000: Stainless End Stops, Ad Panels: 2.88 X 1.38 Black End Stops, Ad Panels: 2.88 X 1.38 Stainless Meter Deck Pumping Unit Deck (Not Shown) Base Frame; 3000 Series Ad Holder, 3000: Black Ad Holder, 3000: Stainless Cover, Electronics, 3000: Black Cover, Electronics, 3000: Stainless Cover, Electronics, 3000: White N/A Bracket, Hose Outlet Support (Not Shown) Washer - Hose Outlet Support Bracket ( Not Shown) 1 A U-Bolt For Hose Support Bracket (Not Shown) Clock Deck Rev B

11 High Hose Frame: Exterior Rev B

12 High Hose Frame: Exterior Ref. No. Part No. Description Quantity Cover Pump Top - Hh; Mech. Black Cover Pump Top - Hh; Mech. Stainless Steel Cover, 3k, Mech. High Hose - White Lock Assm. (Includes Screws, Lw, Nuts, 2 Keys, & Cam.) Key-Cut Cover, Computer, Gallons - Left; Volume Only Cover, Computer, Gallons - Right; Volume Only Cover, Computer, Gallons - Twin; Volume Only Cover, Computer, Gallons - Left; Retail Cover, Computer, Gallons - Right; Retail Cover, Computer, Gallons - Twin: Retail Lens, Mechanical Display, End Stops, Ad Panels; 2.88 X 1.33 Black End Stops, Ad Panels; 2.88 X 1.33 Stainless Steel 6 Product I.D. Ad Panels. See Page Gasket, Main Display (Not Shown) Door, 3000, Blank Black Door, 3000, Blank - Green Door, 3000, Blank - Yellow Door, 3000, Blank - Red Door, 3000, Blank - Stainless Steel Door, 3000, Blank - White Door, 3000, Blank - Blue 8 J Nozzle Hook 2 9 J Handle Stop 4 10 H Handle - Reset End Panel, Hh, 1 Outlet, Black - W/ Retractor End Panel, Hh, 1 Outlet, Stainless - W/ Retractor End Panel, Hh, 1 Outlet, White- W/ Retractor End Panel, Hh, 2 Outlets, Black - W/ Retractor End Panel, Hh, 2 Outlets, Stainless Steel- W/ Retractor End Panel, Hh, 2 Outlets, White - W/ Retractor End Panel, Hh, Blank Black End Panel, Hh, Blank Stainless Steel End Panel, Hh, Blank White Hose Outlet, Island Oriented, Black Hose Outlet, Island Oriented, Stainless Steel Cover, Mechanical High Hose: Black Cover, Mechanical High Hose: Stainless Steel Door, Upper Mechanical 3k: Black Door, Upper Mechanical 3k: Stainless Steel Rev B

13 Ballast Box Ref. No. Part No. Description Quantity Lamp Holder; Fluorescent Med. Base 4 2 A Grounding Lug Cover, Ballast Box 1 4 A Terminal Strip, 22 Positions Standoff #6-32 X.500 Locking Path Ballast v Rev B

14 Product Ad Panels Product (Bennett Standard) Part No. Text Color Background Unleaded Regular White Black Unleaded Plus White Blue Unleaded Premium White Red Diesel Black Green Black Black Diesel On Road Black Yellow Diesel Off Road Black Yellow Bio-diesel Black Yellow E Blue White Super Unleaded White Blue Kerosene White Black Mo Gas White Black Gasohol White Black Av Gas White Black Rev B

15 Standard Low Hose Remote Hydraulics Spec. 100 Parts 10 C D E D B B A Item Part Number Description Comment 1 H Check Valve Cover 2 H Gasket - Check Valve Cover 3 H Check Valve Body-Check Valve & Filter Check Valve & Filter Assembly Includes Item 1, 2, 3, 4, 5, 6, 7 A Micron Paper Filter (Not Shown) A Spin on Filter (Optional-Not Shown) See Field Installation Kits on pg N Filter Cover Gasket 6 N Filter Cover Drain Plug Meter Inlet Gasket SB-100 Meter, M-CAL 10 A Square Seal Meter Outlet Solenoid Valve Assembly 115vac Solenoid Valve Assembly 230vac 13 N Gasket-Solenoid to Flange Adaptor, Outlet, Solenoid SS Pipe Nipple 1 x 5-1/2 16 N Elbow Painted 17 A Reducer 1 to 3/4 Securing Hardware Table on page 19 (Alpha) Y Rev B

16 Standard High Hose Remote Hydraulics Spec. 100 Parts C D E B H 4 B A Y Item Part Number Description Comment 1 H Check Valve Cover 2 H Gasket - Check Valve Cover 3 H Check Valve Body-Check Valve & Filter Check Valve & Filter Assembly Includes Item 1, 2, 3, 4, 5, 6, 7 A Micron Paper Filter (Not Shown) A Spin on Filter (Optional-Not Shown) See Field Installation Kits on pg N Filter Cover Gasket 6 N Filter Cover Drain Plug Meter Inlet Gasket SB-100 Meter, M-CAL 10 A Square Seal Meter Outlet Solenoid Valve Assembly 115vac Solenoid Valve Assembly 230vac 13 N Gasket-Solenoid to Flange Tube 3K Island Hose Male Elbow 1 3/16 to 3/4 NPT Hose Outlet-Non Vapor, 1 Securing Hardware Table on page 19 (Alpha) Rev B

17 Standard Low Hose Suction Hydraulics Spec. 100 Parts C E D B 8 H 7 18 * F G Item Part Number Description Comment Union Motor Pulley, 2.25 Diameter 60 Hz Motor Pulley, 2.75 Diameter 50 Hz 3 E Pipe Nipple 1.5 x HP Motor, 115/230 VAC 50/60 Hz 1PH Hp Motor, 380 VAC 50 Hz, 3 PH Adaptor Inlet (Pumping Unit) Includes Item 1, 2, 3, 4, 5, 6, 7 6 N Gasket, Inlet Adaptor 7 N T75 Pumping Unit HD with Strainer Meter Inlet Gasket SB-100 Meter, M-CAL 10 A Square Seal Meter Outlet Solenoid Valve Assembly 115vac Optional for Single Hose Suction Solenoid Valve Assembly 230vac Optional for Single Hose Suction 13 N Solenoid Gasket to Flange Galvanized Pipe Coupling SS Pipe Nipple 1 x N Male Elbow 17 A Reducer, 1 to 3/4 18 N Manifold, 1 product, 1 hose * Manifold, 1 product twin Securing Hardware Table on page 19 (Alpha) Rev B

18 Standard High Hose Suction Hydraulics Spec. 100 Parts C B D E 8 H F * G Item Part Number Description Comment Union Motor Pulley 2.25 Diameter 60 Hz Motor Pulley, 2.75 Diameter 50 Hz 3 E Pipe Nipple 1.5 x HP Motor 115/230 VAC 50/60 Hz 1PH HP Motor, 380 VAC 50 Hz, 3 PH Adaptor Inlet (Pumping Unit) Includes Item 1, 2, 3, 4, 5, 6, 7 6 N Gasket, Inlet Adaptor 7 N T75 Pumping Unit HD with Strainer Meter Inlet Gasket SB-100 Meter, M-CAL 10 A Square Seal Meter Outlet Solenoid Valve Assembly 115vac Optional for Single Hose Suction Solenoid Valve Assembly 230vac Optional for Single Hose Suction 13 N Solenoid Gasket to Flange Tube 3K Island Hose Tube 3K Island Hose (No Valve) Male Elbow 1 3/16 to 3/4 NPT Hose Outlet-Non Vapor 18 N Manifold, 1 product, 1 hose * Manifold, 1 product twin Securing Hardware Table on page 19 (Alpha) Rev B

19 Hydraulics Hardware Table Item Part No. Description Comment A Screw,Hex Hd, M5-.8 X 16mm B A Screw Hex Hd Cap M X 25mm 8.8 C Screw-Soc Hd. Cap,M6 X 1 X 20 Mm D Screw Socket Hd Cap 1/4-20 X 1 Blk E A Nut-Hex/Ext Lw, #1/4-20 F A Screw-Soc Hd M10-1.5, 25mm G A Screw Hex Hd Cap M X 20mm 8.8 H A Screw, Hex Hd Cap, 5/16-18 X 7/8 I Screw, Soc Hd M10-1.5, Length = 40mm J A Screw Socket Hd Cap 3/8-16 X ¾ K Screw Socket Hd Cap 3/8-16 X 1 L Screw Soc Hd Cap M X 25mm M Screw Soc Hd Cap M X 40mm N Screw, Hex, M6-1.0 X 12mm O Bracket, Outlet To Frame Bs High Hose P Retainer Bar Big Fueler Q Screw Button Hd Soc Cap M6-1 X 16mm Ss R A Screw, Hex Hd Cap, 5/16-18 X 1-1/2 Plate S Screw Hex Hd Cap 5/16-18 X 3" T Screw Hex Hd Cap 5/16-18 X 5" U A Screw Soc Hd Cap M X 20mm V Screw, Socket Hd Cap, 5/16-18 X 1" W Bracket Outlet To Frame Lh X Bracket Outlet To Frame Rh Y A Screw, Hex, M6-1.0 X 20mm Rev B

20 SB-100 Meter Assembly - Mechanical Calibration Rev B

21 SB-100 Meter Assembly - Mechanical Calibration Item Part Number Description Comment 1 N/A Lead Seal Wire Please Call for details 2 N/A Universal Link Please Call for details 3 H Half Coupling Unthreaded See Kit List 4 H Half Coupling Threaded 5 H Screw 6 A Screw, Flat Head M X 8 mm 7 N Shaft Seal Retainer S Shaft Seal Kit, Lipseal for Service 9 A Screw, Hex Head M6-1.0 X 20 mm 9 N Screw, Hex Head M6-1.0 X 20 mm with Seal Hole 10 A O-Ring, Square Section 11 N Collector Cover Collector Cover High Alcohol 12 A O-Ring, Square Section 13 N Gasket Spring 15 A Screw, Fil Head M4-0.7 X 10 mm Stainless Steel 16 N Inner Diaphragm Retainer Diaphragm 18 N Gasket 19 N Counter Valve Counter Valve Assembly Includes Items 15,17,18,19,21 21 N Outer Diaphragm Retainer 22 A Screw, Pan Head M5-0.8 X 12 mm Collector Cover Assembly Collector Cover Assembly High Alcohol 24 N Drive Pin 25 N Distributor 26 A Retaining Ring 27 A Washer Crankshaft Support Meter Body Assembly Meter Body Assembly High Alcohol 29 N Roller & Bearing Assembly 30 A Washer 31 A Lock Nut 32 N Crank Shaft Assembly Gallons 32 N Crank Shaft Assembly Liters Pin Cylinder Cover Gallons Pin Cylinder Cover Liters Pin Cylinder Cover High Alcohol Gallons Pin Cylinder Cover High Alcohol Liters 33 N Cylinder Cover (Non Pin) 34 A O-Ring, Square Section 35 N Piston Screw, Hex Head With Nylon Patch (also use with High Alcohol) 36 N Piston Assembly Piston Assembly High Alcohol 38 N Connecting Rod 39 A Retaining Ring 40 N Calibrating Cover Calibrating Cover High Alcohol O-Ring 42 N Calibrating Dial & Screw Assembly 43 N Seal Pin 44 N Calibration Cover Assembly Calibration Cover Assembly High Alcohol Gasket, Meter Inlet Not Shown 46 N902401S Valve Plate Not Shown 47 A Screw, Valve Plate Not Shown 48 A DU Bearing, Meter Body Not Shown, for meters built since N DU Bearing and Retainer, Meter Body Not Shown, for meters built before Rev B

22 Type 75 Pumping Unit Rev B

23 Type 75 Pumping Unit Item Part Number Description Comment 1 A Bolt M X 25 mm (Use N for Seal Wire Bolt) 2 N Meter Inlet Adaptor With Tap Meter Inlet Adaptor High Alcohol 3 N Gasket, Meter Inlet Adaptor Housing, Air Valve Float Assembly Gasket Float Retainer Ring ID Tag 12 N Cover, Atmospheric Chamber Meter Mount Style Cover, Atmospheric Chamber Meter Mount Style - High Alcohol 13 N Cover, Atmospheric Chamber Pipe Outlet with Motor Mount Ears Cover, Atmospheric Chamber Pipe Outlet with Motor Mount Ears - High Alcohol Cover, Atmospheric Chamber GPU Cover, Atmospheric Chamber GPU - High Alcohol 17 N Gasket - Atmospheric Cover 18 A Bolt - Round Head M6-0.7 X 20 mm 19 N Non-Reversing Float O-Ring #O17 Also used with High Alcohol Atmospheric Float Assembly 22 N Gasket - Atmospheric Cover One Piece Air Separator Body One Piece Air Separator Body High Alcohol 24 N Gasket, Inlet Separator 25 N Gasket, Outlet Separator 26 N Insert - Air Separator Inlet Tube - Air Separator Piston OIML Only Spring End Cap 31 N Tube - Air Separator Screw - Air Test Valve Adaptor - Air Test Valve Pipe Plug 1/4-18NPT 35 N Cover, Control Valve Cover, Control Valve High Alcohol 36 N Gasket 37 E Spring Standard Delivery Pump 12 GPM J Spring Heavy Duty Delivery Pump 22 GPM Control Valve Assembly Aluminum Body Version with Hard Coat 39 A Pressure Relief Valve O-Ring #210 Also used with High Alcohol 41 N Pump Body Pump Body High Alcohol N Pump Body Side Inlet Version Pump Body Side Inlet High Alcohol 42 N Filter Insert Strainer, 70 Micron / 200 Mesh Standard Production A Paper Filter, 35 Micron N Strainer, 100 Micron N Cloth Sack. 10 Micron For use with Strainer 44 N Filter Spring 45 N Gasket 46 N Filter Cover Filter Cover High Alcohol 47 N Bypass Cover Non-Adjustable Bypass Cover High Alcohol 48 N Gasket Rev B

24 Type 75 Pumping Unit Item Part Number Description Comment 49 N Bypass Valve Standard - Silver Spring Low Pressure N Bypass Valve Standard - Green Spring Medium Pressure N Bypass Valve Standard - Copper Spring High Pressure O-Ring #229 Also used with High Alcohol 51 A Cap Nut 52 A Seal Ring 53 N Disc 54 N Adaptor Not Sold Separately - See Item #60 55 A Retaining Ring 56 N Check Valve Body 57 N Spring 58 N Washer 59 N Shaft 60 N Check Valve Assembly With out Ring KR Check Valve Assembly Includes Item #50 & Item #60 61 N Cap 62 N Adjustment Screw 63 A Washer 64 N Cover - Adjustable Bypass 65 A Screw M X 20 mm 66 A Lock Washer 67 A Flat Washer 68 N Pulley - Single Groove Pulley - Dual Groove 69 N Clamping Ring 70 N Gasket 71 J Rotor Cover Assembly 72 A Flat Head Screw 73 H Shaft Seal Retainer 74 A Shaft Seal (with insertion tool) Shaft Seal Kit - Includes #74 & 75 with install plug 75 A Square Seal 76 N Rotor Cover 77 N Throw Out Ring Standard Delivery Pump N Throw Out Ring Heavy Duty Pump 78 A Woodruff Key 79 A Retaining Ring 80 N Rotor & Shaft Assembly Standard 6 Blade Rotor *KR0420xx *Rotor Replacement Kit Includes #70, 74, 75, (2) 77, 80, (6) 81 xx= 01 Std Delivery 02 Heavy Duty Rotor Blade 82 N Stator Standard Delivery Pump N Stator Heavy Duty Pump KR Gasket Set for Pumping Unit Complete Set of Gaskets, Seals, and O-Rings for P/U Rev B

25 Mechanical Computers and Non Computers V/R 10 Computer V/R 101 Non-Computer Rev B

26 Mechanical Computers and Non Computers Rev B

27 Mechanical Computers and Non Computers Ref. No. Part No. Description Quantity VR Non Computer W/ El. Reset (Gallons Or Liters, 115 Volt) VR - 10 Computer & El. Reset (115 Volt) Bolt (Veeder-Root # ) 1 3 J982101P01 Computer Dial Face-With Slot 1 J982102P01 Computer Dial Face-Without Slot 1 6 H Gear, U.S. Gallons White 1 J Gear, Liters, Black (Uses E Pin) 1 7 H Gear Box Assm. - Us. Gallons - White 1 H Gear Box Assm. - Liters - Black 1 8 H Gear, With Groove, Without Hole In Tip. 1 9 H Gear, Intermediate. - U.S. Gallons - White 1 10 H Gear Box Housing 1 11 A Retaining Ring M Washer Universal Link 4-1/8 Gallons (Used With Gear Box) Universal Link 4-5/8 Liters (Non-Gearbox) 1 14 A Lockwasher Lockwasher Veeder-Root # A Nut Lock Conduit & Wire Assm- El. Reset :1 Pulser Assembly :1 Pulser Assembly :1 Pulser Kit (Incl. Conduit) :1 Pulser Kit (Incl. Conduit) 1 J Gear, Liters - Black 1 23 J Reset, Electric, 115 Volt Reset, Electric, 230 Volt M Screw, Shoulder 2 25 A Screw, Hex Hd, Cap. (3/8-24 X 1/2) 3 26 A Screw & Lockwasher (#10-24 X 1/2) 1 28 A Screw Stud, Short (Veeder-Root # ) Stud, Long (Veeder-Root # ) Totalizer For Non Computer - (Gallons) M Washer, Large Rev B

28 Note: Part numbers shown (except items 49-52) are Veeder Root part numbers for a standard Veeder-Root Electric Reset (7269). Replacement parts can be ordered through a VeederRoot Distributor or Bennett Pump Co. Electric Reset - VeederRoot Rev B

29 Electric Reset - VeederRoot Ref. No. Part No. Description Quantity Unmarked Cover Group Coupling Shaft Groove Pin Retaining Ring Washer AS REQ'D Lower Bushing (Not Included In Item 7) Screw Strap Middle Bushing (Not Included In Item 7) Upper Bearing (Not Included In Item 7) Jack Shaft Assembly Washer (Use With Item 11, ) Spring Retainer (Use With Item 11, ) Bushing (Use With Item 11, ) Bushing (Use With Item 11) Spring (Use With Item 11) Pawl W/O Finger (See Items 8 & 9) Pawl W/ Finger (See Items 8, 9 & 10) S3 Motor Switch Vac Elec. Motor Group Vac Elec. Motor Group Washer AS REQ'D Washer AS REQ'D Washer AS REQ'D Plug AS REQ D Washer AS REQ'D Washer AS REQ'D Washer AS REQ'D Retaining Ring Washer Spring Drive Washer Case Group 1 22 N/A Not Used Switch Pawl Group Switch Pawl Screw Switch S1 & S2 1 or Stop Group Stop Pawl Post Spring Screw Washer Clutch Shaft Group (With Plastic Cam ) Clutch Shaft Group (With Metal Cam ) Clutch Shaft Group (Remotely Resettable) Clockwise Manual Cam Group Counterclockwise Manual Cam Group Cover Screw Cover Washer Rev B

30 Electric Reset - VeederRoot (Cont d) Ref. No. Part No. Description Quantity Screw Switch Plate Insulator Insulator Screw Washer AS REQ'D 38A Washer Lock Washer 1 39A Screw Buffer Plate Lock washer *001 Nut Screw Washer Washer AS REQ'D Washer AS REQ'D Washer AS REQ'D Washer Washer AS REQ'D Washer AS REQ'D Washer AS REQ'D 49 A Screw 1 50 A Wire Tie 1 51 A Wire Tie Mount Rev B

31 Handle Linkage Parts Ref. No. Part No. Description Quantity 1 J Anchor Or Spring. 1 2 H Handle 1 3 J Lever And Coupling Assm Universal Link 2-5/ A Nut, Hex/Ext. Lw #1/ A Pin-Spirals (5/32 X 1-1/2 ") Groove Pin 1 8 J Plate And Bearing Assm. 1 9 A Retaining Ring, External 1 10 A Retaining Ring 1 11 N Shaft- Handle 1 12 J SpringOver Center Assist 1 13 J Yoke And Bearing Assm Rev B

32 Cam-AC Parts Ref. No. Part No. Description Quantity 3 H Clutch/Cam Assembly 4 H Clutch, Half K Grommet, Handle 6 E Handle, Reset 7 H Handle Assembly 8 A Ball And Stud 9 H Handle Link, Universal Universal Link, Reset 12 A Lockwasher 13 A Locknut 14 A Nut And Lockwasher Motor Switchbox And Bracket Asm (Switch & Brkt Asm, Dpst Switch) Motor Switchbox And Bracket Asm (Switch & Brkt Asm, Spst Switch) 16 H Bracketed Plate Assembly 17 A Screw, Hex Head Switchbox With 2 Blue & 2 Black Wires (Dpst) Switchbox With 2 Black Wires (Spst) 20 H Box And Bearing Assembly 21 H Cover 23 H Follower Rev B

33 Cam-AC Parts (Cont d) Ref. No. Part No. Description Quantity 24 H Nut 1 25 A Ring, Retaining 1 26 A Screw, Hex Head I0-24 X 3/ A Screw, And Lockwasher 1 28 H Shaft 1 29 H Spring 1 30 A Switch, E Switch, Spdt 1 31 N Travel Limiter 1 32 A Washer, Flat 1 34 A Pin, Spiral 1 35 E Plate And Bearing Assembly 1 36 A Ring, Retaining 1 37 A Screw 1 38 H Shaft And Key Assembly 1 39 A Key, No A Ring, Retaining 1 41 H Spring 1 Field Installation Kits Part No. Description :1 Pulser Kit. (Used Only If 10:1 Pulser Does Not Already Exist In Unit) (For 101 Non-Computer Only) :1 Pulser Kit. (Used Only If 100:1 Pulser Does Not Already Exist In Unit) (For 101 Non-Computer Only) KR Type 75 Pumping Unit Gasket Kit KR SB-100 Crankshaft Kit (Gallons) KR SB-100 Piston Repair Kit KR SB-100 Diaphragm / Distributor Kit Spin On Filter Kit (Used Only If Spin On Filter Does Not Already Exist In Unit) Ballast Replacement Kit Rev B

34 THIS PAGE INTENTIONALLY LEFT BLANK Rev B

35 Bennett Limited Warranty for Products Installed in the United States Retail & Commercial Bennett Pump Company guarantees new Service Station Equipment manufactured by Bennett against defects in material or workmanship during the warranty period in accordance with the provisions stated below: The Site Audit Report issued with all equipment must be completed and returned at time of installation to Bennett Pump Company, Spring Lake, MI to initiate warranty. Warranty service must be performed by the nearest Bennett Authorized Service Representative qualified to perform service on the defective equipment. Only Authorized and Certified Service Representatives are allowed to perform warranty service. Use of service personnel other than qualified Bennett Service Representatives without prior approval by Bennett Pump Company will void payment of any warranty claims. Labor and travel costs incurred while servicing Bennett equipment will be paid at previously contracted rates subject to published standard repair time allowances to qualified Bennett Service Representatives with travel cost limited to 200 miles. Travel cost shall be limited to 4 hours round trip. Bennett equipment has been installed according to the manufacturer s instructions and diagrams. During the warranty period, Bennett Pump Company will, at its option, repair or replace defective parts returned to its factory, transportation charges prepaid. The manufacturer reserves the right to make changes in the design or to make additions Dispensers 3000 Series Retail & Commercial Self Contained and Remote Warranty on parts, labor, and travel is 12 months from date of installation or 18 months from date of Bennett s original invoice, whichever comes first. Warranty excludes nozzles, hoses and fittings, hose retractor, hose reels, filters, belt adjustments, paper jams, light bulbs, or any leaks after the installation start-up and audit. Minor adjustments such as meter calibration, pulser adjustments, and handle switch adjustments, customer specified items manufactured by others, and customer requested reprogramming of equipment are not covered by warranty. Field Retrofit Card Readers, Payment Modules, Cash Acceptors, and all other field retrofit Accessories The field retrofit assembly is warranted for parts only for 12 months from date of installation or 18 months from date of original invoice, whichever comes first, except the receipt printer and driver board which is warranted for parts for ninety (90) days from the date of installation or 180 days from original invoice, whichever comes first. Consumable Items such as receipt paper are not warranted. The use of receipt paper not specified by Bennett will void the printer assembly warranty. Model 515 Pump Controller, 621 Module, Fan Out Boxes Warranty on parts, labor and travel is 12 months from the date of installation or 18 months from the date of original invoice, whichever comes first. Software Bennett Pump Company warrants Bennett products and software packages, whose operation is controlled by Bennett designed and developed software, shall be free of material defects and conform to current Bennett specifications for a period of ninety (90) days from the date of original invoice. Bennett shall use its best effort to correct such defects and to supply to purchaser at Bennett s expense, a corrected version within a reasonable time after purchaser notifies Bennett in writing of any defects and provides the programs and instructions required to reproduce the claimed defect. Warranty does not cover any modification to the program, the Bennett product, and/or connection to unapproved equipment made by any person or any defect caused by such modifications/connections. Upgrade Kits Bennett offers kits which are installed as an option to enhance operating features of an existing Bennett product are warranted for parts only for ninety (90) days from date of installation or 12 months from date of original invoice, whichever comes first. Upgrade Kit warranty applies to kit components only. Warranty status of the remainder of the product remains unchanged. Spare Parts For equipment under warranty: The warranty period for all spare parts replaced is the remainder of the original warranty. Spare Parts are warranted for the value of the parts only (no labor, mileage, or other charges). For equipment not under warranty: The warranty period is 90 days from the date of invoice to the end user, or 12 months from the date of original invoice, whichever comes first. Spare Parts are warranted for the value of the parts only (no labor, mileage, or other charges). General Exclusions 1.Warranty does not apply to any product which has been altered, subjected to unusual physical or electrical stress, an Act of God, damaged by accident, tampered with, or subjected to misuse or abuse including substituting parts or accessories from other manufacturers without the written consent of Bennett Pump Company. The above warranties shall not exist if the original identification marks have been removed or altered. 2.Bennett makes no warranty with respect to the Bennett equipment or Bennett s performance of services under this agreement, express or implied, and Bennett hereby disclaims the implied warranties of merchantability and fitness for a particular purpose. 3.In no event shall Bennett be liable for any loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages of any kind in connection with or arising out of the furnishing, performance, use or failure of the Bennett equipment, software or services acquired from Bennett, the distributor or the user, whether alleged as a breach of contract or tortuous conduct, including negligence. Bennett s liability hereunder for damages shall not, in any event, exceed the amounts paid by the buyer to Bennett for equipment, software or services as to which the claim arose. 4.No action arising out of any claimed breach of the Warranty Agreement or transaction under this Warranty Agreement may be brought by either party more than two (2) years after the cause of action has accrued. 5.Use of non-bennett replacement parts, unless specified by Bennett, will void the equipment warranty. 6.This warranty only applies to Bennett equipment installed in the United States of America and is non-transferable. 7.Failure to pay the Bennett invoice within stated invoice terms, covering the respective Bennett equipment purchased under this limited warranty may, at Bennett s discretion, void this limited product warranty. THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING, WITHOUT LIMITATION, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. BENNETT PUMP COMPANY 1218 E. Pontaluna Road Spring Lake, MI Tel: Fax: Rev B Form Rev B

36 Bennett International Limited Warranty for Dispensers and Pumps Bennett Pump Company guarantees new Service Station Equipment manufactured by Bennett against defects in material or workmanship during the warranty period in accordance with the provisions stated below: The Site Audit Report issued with all equipment must be completed and returned at time of installation to Bennett Pump Company, Spring Lake, MI to initiate warranty. Warranty service must be performed by the nearest Bennett Authorized Service Representative qualified to perform service on the defective equipment. Only Authorized and Certified Service Representatives are allowed to perform warranty service. Use of service personnel other than qualified Bennett Service Representatives without prior approval by Bennett Pump Company will void payment of any warranty claims. Labor and travel costs incurred while servicing Bennett equipment is not covered under this limited warranty. Bennett equipment has been installed according to the manufacturer s instructions and diagrams. During the warranty period, Bennett Pump Company will, at its option, repair or replace defective parts returned to its factory, transportation charges prepaid. The manufacturer reserves the right to make changes in the design or to make additions Dispensers (Remote and Self-contained styles) (excluding Natural Gas, Hydrogen and Hydraulic-less Dispensers) The Warranty will cover repair or replacement, at Bennett s option, of the parts only that are deemed to be defective in material or workmanship at Bennett s discretion, for a period of 12 months from date of installation or 18 months from date of Bennett s original invoice, whichever comes first. Warranty excludes nozzles, hoses and fittings, hose retractor, filters, belt adjustments, paper jams, light bulbs, or any leaks after the installation start-up and audit. Minor adjustments such as meter calibration, pulser adjustments, and handle switch adjustments, customer specified items manufactured by others, and customer requested reprogramming of equipment are not covered by warranty. Field Retrofit Card Readers, Payment Modules, Cash Acceptors, and all other field retrofit Accessories The field retrofit assembly is warranted for parts only for 12 months from date of installation or 18 months from date of original invoice, whichever comes first, except the receipt printer and driver board which is warranted for parts for ninety (90) days from the date of installation or 180 days from original invoice, whichever comes first. Consumable Items such as receipt paper are not warranted. The use of receipt paper not specified by Bennett will void the printer assembly warranty. Model 515 Pump Controller, 621 Module, Fan Out Boxes Warranty on parts only is 12 months from the date of installation or 18 months from the date of original invoice, whichever comes first. Software Bennett Pump Company warrants Bennett products and software packages, whose operation is controlled by Bennett designed and developed software, shall be free of material defects and conform to current Bennett specifications for a period of ninety (90) days from the date of original invoice. Bennett shall use its best effort to correct such defects and to supply to purchaser at Bennett s expense, a corrected version within a reasonable time after purchaser notifies Bennett in writing of any defects and provides the programs and instructions required to reproduce the claimed defect. Warranty does not cover any modification to the program, the Bennett product, and/or connection to unapproved equipment made by any person or any defect caused by such modifications/connections. Upgrade Kits Bennett offers kits which are installed as an option to enhance operating features of an existing Bennett product are warranted for parts only for ninety (90) days from date of installation or 12 months from date of original invoice, whichever comes first. Upgrade Kit warranty applies to kit components only. Warranty status of the remainder of the product remains unchanged. Spare Parts For equipment under warranty: The warranty period for all spare parts replaced is the remainder of the original warranty. Spare Parts are warranted for the value of the parts only (no labor, mileage, or other charges). For equipment not under warranty: The warranty period is 90 days from the date of invoice to the end user, or 12 months from the date of original invoice, whichever comes first. Spare Parts are warranted for the value of the parts only (no labor, mileage, or other charges). General Exclusions 1.Warranty does not apply to any product which has been altered, subjected to unusual physical or electrical stress, an Act of God, damaged by accident, tampered with, or subjected to misuse or abuse including substituting parts or accessories from other manufacturers without the written consent of Bennett Pump Company. The above warranties shall not exist if the original identification marks have been removed or altered. 2.Bennett makes no warranty with respect to the Bennett equipment or Bennett s performance of services under this agreement, express or implied, and Bennett hereby disclaims the implied warranties of merchantability and fitness for a particular purpose. 3.In no event shall Bennett be liable for any loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages of any kind in connection with or arising out of the furnishing, performance, use or failure of the Bennett equipment, software or services acquired from Bennett, the distributor or the user, whether alleged as a breach of contract or tortuous conduct, including negligence. Bennett s liability hereunder for damages shall not, in any event, exceed the amounts paid by the buyer to Bennett for equipment, software or services as to which the claim arose. 4.No action arising out of any claimed breach of the Warranty Agreement or transaction under this Warranty Agreement may be brought by either party more than two (2) years after the cause of action has accrued. 5.Use of non-bennett replacement parts, unless specified by Bennett, will void the equipment warranty. 6.This warranty only applies to Bennett equipment installed outside the United States of America and is non-transferable. 7.Failure to pay the Bennett invoice within stated invoice terms, covering the respective Bennett equipment purchased under this limited warranty may, at Bennett s discretion, void this limited product warranty. THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING, WITHOUT LIMITATION, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. BENNETT PUMP COMPANY 1218 E. Pontaluna Road Spring Lake, MI Tel: Fax: Rev B Form Rev B

37 Revision Log Revision Date Description A 5/31/12 Original Document B 4/24/17 Updated Bennett Limited Warranty to Products Installed in the USA Added Bennett International Limited Warranty Rev B

38 Rev B Bennett 1218 E. Pontaluna Road, Spring Lake, MI USA ~ Outside USA sales@bennettpump.com ~