LED LIGHTING. Wesled Distributors Houston Dallas Irvine Louisville OUR LIGHTING PRODUCT SERIES

Transcription

1 OUR LIGHTING PRODUCT SERIES LED FIXTURE Wall Pack Full Cutoff Wall Pack Slim Wall Pack Wall Mount Canopy Area Light Dusk To Dawn Flood Light High Bay Linear High Bay Vapor Tight Linear Fixture Landscape LED LIGHTING 219 Wesled Distributors Houston Dallas Irvine Louisville

2 CONTENTS We're the fastest-growing LED Light fixtures supplier. Our International partners have obtained multiple design patents and are honored as a National High- Tech Enterprise. With strict control on manufacturing procedures, the facility is certified by ISO 1 Quality Management System. is integrated to combine R&D and manufacturing, offering a broad range of Indoor & Outdoor LED lighting products for Commercial and Industrial applications in North American market, with the ability to provide multitude of shell tooling, power suppliers and accessories, allowing custom LED solutions. WALL PACK MWP1 MWP2 MWP3 MWP4 MWP5 MWP6 MWP7 MWM1 FLOOD LIGHT MFD1 MFD2 MFD3 MFD4 LED LANDSCAPE MLS1 MLS2 HIGH BAY MHB1 MLH1 MLH3 VAPOR TIGHT MVT2 LINEAR FIXTURE MLF1 MLF2 CANOPY MCP1 MCP2 MCP3 DUSK TO DAWN MDD1 MDD2 AREA LIGHT MAL1 MAL2 MAL

3 LED Wall Pack (MWP1) Up to 8,1 + Lumens Medium Wall Pack 3W&W&W Dimensions:14.213x13.7x7.42in. ENHANCED LED PERFORMANCE IN A The LED wallpacks offer maximum light output for general purpose area and security lighting. They efficiently deliver lumens, and consume less energy than traditional wallpack MH technologies. This versatile luminaire is ideal for replacing existing MH fixtures. Applications: Security, pathway and perimeter lighting, Building entryways and walkways. MEDIUM WALL PACK WP3W27V5KD 3,4 Lumens 3W WPW27V5KD 5,3 Lumens W WPW27V5KD 8,1 Lumens W 25W MH ENHANCED LED PERFORMANCE IN A The LED wallpacks offer maximum light output for general purpose area and security lighting. They efficiently deliver lumens, and consume less energy than traditional wallpack MH technologies. This versatile luminaire is ideal for replacing existing MH fixtures. Applications: Security, pathway and perimeter lighting, Building entryways and walkways. MEDIUM FULL CUTOFF WALL PACK WPFW27V5KD 4, Lumens W WPFW27V5KD 7,35 Lumens W 25W MH Full Cutoff LED Wall Pack (MWP2) Up to 7,35 + Lumens Medium Full Cutoff Wall Pack W&W Dimensions:14.212x9.251x8.779in. Up to 16,4 + Lumens Large Wall Pack W & W Dimensions:18x9.75x8.72in. Available with 4V LARGE WALL PACK WPW27V5KD 11,2 Lumens W 32W MH WPW27V5KD 16,4 Lumens W LARGE FULL CUTOFF WALL PACK WPFW27V5KD 9,5 Lumens W 32W MH WPFW27V5KD 14, Lumens W Up to 14, + Lumens Large Full Cutoff Wall Pack W&W Dimensions:18.98x1.81x9.75in. NEW Photocell - Button, 12V/12-277V or Pre-installed in factory by requesting Emergency Battery Backup NO. EB-8W/min-1 USE lm min. Only suitable for W, W. DLC qualified at 4K and. LM- certified high performance and reliable lumileds. Voltage is V/347V Die-cast aluminum with durable dark bronze coat finish. Junction box or wall mounted directly. Suitable for use in -4 to 4. DLC qualified at 4K and. LM- certified high performance and reliable lumileds. Voltage is V/347V Die-cast aluminum with durable dark bronze coat finish. Junction box or wall mounted directly. Suitable for use in -4 to 5. Photocell - Button, 12V/12-277V 1 2

4 LED Wall Pack (MWP6) Up to 7, + Lumens Medium Wall Pack 3W&W&W Dimensions:14.213x13.7x7.95in. The LED MWP6 offers efficiently deliver lumens, and consume less energy than traditional wall pack MH technologies. Photocell and Motion Sensor optional and supports Emergency Battery. -1V dimmable. Applications: Security, pathway and perimeter lighting, Building entryways and walkways. MEDIUM WALL PACK MWP63W27V5KD 3,4 Lumens 3W MWP6W27V5KD 4,95 Lumens W MWP6W27V5KD 7, Lumens W The LED MWP7 offer maximum light output for general purpose area and security lighting. They efficiently deliver lumens, and consume less energy than traditional wall pack MH technologies. -1V dimmable. Photocell and Motion Sensor optional and supports Emergency Battery. Applications: Security, pathway and perimeter lighting, Building entryways and walkways. MEDIUM FULL CUTOFF WALL PACK MWP73W27V5KD 3,4 Lumens 3W MWP7W27V5KD 4, Lumens W MWP7W27V5KD 7,5 Lumens W 25W MH Full Cutoff LED Wall Pack (MWP7) Up to 7,5 + Lumens Medium Full Cutoff Wall Pack 3W&W&W Dimensions:14.212x13.7x9.33in. LARGE WALL PACK MWP6W27V5KD MWP6W27V5KD LARGE FULL CUTOFF WALL PACK MWP7W27V5KD MWP7W27V5KD 9,95 Lumens 15,55 Lumens 9, Lumens 14,6 Lumens W W W W 32W MH 25W MH Up to 15,55 + Lumens Large Wall Pack W & W Dimensions:18x9.75x9.22in. NEW Photocell - Button, 12V/12-277V Occupancy Sensor, V USE: Sensor is field installed NEW Photocell - Button, 12V/12-277V Occupancy Sensor, V USE: Sensor is field installed Up to 14,6 + Lumens Large Full Cutoff Wall Pack W&W Dimensions:18.98x1.81x11.24in. NEW Emergency Battery Backup NO. EB-8W/min-1 USE lm min. Only suitable for W, W and W. NEW Emergency Battery Backup NO. EB-8W/min-1 USE lm min. Only suitable for W, W and W. DLC qualified at 4K and. LM- certified high performance and reliable lumileds. Voltage is V and support -1V dimmable Die-cast aluminum with durable dark bronze coat finish. Junction box or wall mounted directly. Suitable for use in -4 to 4. DLC qualified at 4K and. LM- certified high performance and reliable lumileds. Voltage is V and support -1V dimmable Die-cast aluminum with durable dark bronze coat finish. Junction box or wall mounted directly. Suitable for use in -4 to

5 Slim Full Cutoff LED Wall Pack (MWP4) The LED slim wall pack offer maximum light output for general purpose area and security lighting. They efficiently deliver lumens, and consume less energy than traditional wall mount technologies. This versatile luminaire is ideal for replacing existing MH fixtures. Applications: Security, pathway and perimeter lighting Building entryways and walkways. The LED slim wall pack offer maximum light output for general purpose area and security lighting. They efficiently deliver lumens, and consume less energy than traditional wall mount technologies. This versatile luminaire is ideal for replacing existing MH fixtures. Applications: Security, pathway and perimeter lighting Building entryways and walkways. Up to 3,6 + Lumens Slim Full Cutoff Wall Pack 3W Dimensions: 7.94x6.3x3.78in. Available with 347V SLIM FULL CUTOFF WALL PACK SWP3W27V5KD 3,6 Lumens 3W SLIM FULL CUTOFF WALL PACK WPI3W27V5KD 3, Lumens 3W WPI4W27V5KD 4,5 Lumens 4W Slim Full Cutoff LED Wall Pack (MWP3) Up to 4,5 + Lumens Slim Full Cutoff Wall Pack 3W & 4W Dimensions: 8.96x6.77x4.13in. Photocell - Button, 12V/12-277V Head tilts to 2degree Small Wall Pack (MWP5) Up to 3, + Lumens Small Wall Pack 25W&3W Dimensions:8.26x8.858x7.244in. SMALL WALL PACK MWP525W27V5KD 3,2 Lumens 25W MWP53W27V5KD 3, Lumens 3W LARGE FULL CUTOFF WALL PACK WPIW27V5KD 7, Lumens W 25W MH WPIW27V5KD 1,5 Lumens W 32W MH Up to 1,5 + Lumens Large Full Cutoff Wall Pack W & W Dimensions:12.99x1.16x5.17in. Available with 347V Photocell - Button, 12V/12-277V DLC qualified at 4K and. LM- certified high performance and reliable lumileds. Voltage is V HOUSING Die-cast aluminum housing with dark bronze coat finish. Junction box or wall mounted directly. Suitable for use in -4 to 4. DLC qualified at 4K and. LM- certified high performance and reliable lumileds. Voltage is V HOUSING Die-cast aluminum housing with dark bronze coat finish head can be tilted design. PHOTOMETRY Type III light distribution is available. Junction box or wall mounted directly. Suitable for use in -4 to 4. Head tilts to 2degree Photocell - Button, 12V/12-277V 5 6

6 LED Wall Mount (MWM1) Up to 2, + Lumens Wall Mount 15W&17W&25W Dimensions: 8.384x5.484x3.523in. Up to 2,6 + Lumens Wall Mount 17W & 25W Dimensions: 8.384x5.484x3.523in. The LED wall mount offer maximum light output for general purpose area and security lighting. They efficiently deliver lumens, and consume less energy than traditional wall mount technologies. This versatile luminaire is ideal for replacing existing MH fixtures. Applications: Security, entry ways, stairways, storage and perimeter areas, as well as residential exteriors. WALL MOUNT WM15W12V5KDF 1,6 Lumens 15W 1W INCANDESCENT WM17W27V5KDF 2, Lumens 17W 12W INCANDESCENT WM25W27V5KDF 2, Lumens 25W 5W MH WALL MOUNT WM17W27V5KD 1, Lumens 17W 12W INCANDESCENT WM25W27V5KD 2,6 Lumens 25W 5W MH The Mini LED floodlights replace 5W, 1W and 15W pulse start metal halide floodlights while consuming 15W and 3W and W only The fixture is wet location rated for outdoor use. Rugged Die-cast aluminum housing. Protective architrctural dark bronze powder paint finish,ensures lasting performance in harsh environmental conditions. Available standard NEMA 7H*7V beam pattern. Applications include building facades, displays, landscaping, security lighting, walkways and other work areas. FLOOD LIGHT MINI NEMA FLOOD LIGHT MINI NEMA FLOOD LIGHT MINI NEMA FD15W27V5KBDB77 1,5 Lumens 15W 5W MH FD3W27V5KBDB77 3, Lumens 3W FDW27V5KBDB77 5,4 Lumens W 15W MH LED Flood Light (MFD3) Up to 1,5 + Lumens Flood Light Mini 15W Dimensions: 4.72x2.95x1.27in. Mounting: Knuckle & Trunnion Up to 3, + Lumens Flood Light Mini 3W Dimensions: 7.8x4.42x1.61in. Mounting: Knuckle & Trunnion & Wall mount Up to 5,4 + Lumens Flood Light Mini W Dimensions: 8.26x5.15x2in. Mounting: Knuckle & Trunnion & Wall mount Photocell - Button, 12V/12-277V DLC qualified at 4K and. LM- certified high performance and reliable lumileds. Voltage is V Die-cast aluminum with durable dark bronze/black/white coat finish. Junction box or wall mounted directly. Suitable for use in -4 to 4. MOUNTING Trunnion Mount Die-cast aluminum trunnion is easily adapted to many surfaces and allows easy fixture aiming angles. Wall Mount for 3W & W ONLY Wall Mount is easy to install onto standard 4 & 5 J-box mounting 7 8

7 LED Flood Light (MFD2) Up to 3,35 + Lumens Flood Light Bullet 2W & 3W Dimensions: 6.84xØ5.97in. Available with 25 & 44 The Bullet Flood light is ideal for many commercial and residential outdoor applications like landscapes and flag poles...they efficiently deliver lumens and consume less energy than halogen technologies. Superior housing design optimize thermal management and make it operating at low temperature and long life. FLOOD LIGHT BULLET FR2W27V5KBDSFL FR3W27V5KBDSFL FR3W27V5KBDNFL BEAM ANGLE 2,5 Lumens 2W 25 3,35 Lumens 3W 25 3,35 Lumens 3W 44 Remain its traditional by providing contractor oriented products in a family of luminaires with the best and high performance, the powerful led flood light offer a wide range of wattage for replacing traditional MH technology, it is available in three size and each with its own unique mounting and optics for specific applications of Facade, Wall washing, Landscape lighting, Poster board lighting and Building lighting. FLOOD LIGHT MEDIUM FDW27V5KBDWFL 8, Lumens FDW27V5KBDWFL 11, Lumens FD11W27V5KBDWFL 12,5 Lumens W W 11W NEMA 25W MH 7Hx6V 32W MH 7Hx6V 32W MH 7Hx6V LED Flood Light (MFD1) Up to 12,5 + Lumens Flood Light Medium W&W&11W Dimensions: 12.9x11.9x5.52in. Mounting: Knuckle & Trunnion & Slipfitter LED Flood Light (MFD1) Up to 7,4 + Lumens Flood Light Small 35W&W&65W Dimensions: 9.28x7.95x5.15in. Available with & 17 FLOOD LIGHT SMALL FD35W27V5KBDWFL FDW27V5KBDWFL FD65W27V5KBDWFL 3,6 Lumens 5,3 Lumens 7,4 Lumens 35W W 65W BEAM ANGLE 15W MH FLOOD LIGHT LARGE NEMA FD14W27V5KBDB76 FD2W27V5KBDB76 16, Lumens 24, Lumens 14W 2W W MH 7Hx6V 7Hx6V Photocell - Button, 12V/12-277V Up to 24, + Lumens Flood Light Large 14W & 2W Dimensions: 17.78x11.9x5.72in. Mounting: Trunnion & Slipfitter MOUNTING G 1/2" Knuckle Mount Die-cast aluminum knuckle provides flexibility in mounting from a variety of areas. Trunnion Mount Die-cast aluminum trunnion is easily adapted to many surfaces and allows easy fixture aiming angles. MOUNTING G 1/2" Knuckle Mount Die-cast aluminum knuckle provides flexibility in mounting from a variety of areas. Slipfitter Mount Die-cast aluminum slipfitter mounts on 2 3/8"to 3" O.D. tenon easily. Trunnion Mount Die-cast aluminum trunnion is easily adapted to many surfaces and allows easy fixture aiming angles. Photocell - Button, 12V/12-277V 9 1

8 LED Flood Light (MFD4) Up to 13,4 + Lumens Flood Light W & 15W Dimensions: 12.42x13.228x3.71in. NEW DESIGN Medium and Large LED floodlights available in /15/15/2/25/3W, replace up to 1,W metal halide floodlights, operating for 5,+ hours. This fixture is wet location rated for outdoor use. Rugged Die-cast aluminum housing, corrosion resistant and compact. Protective architrctural dark bronze powder paint finish, ensures lasting performance in harsh environmental conditions. Variety of standard NEMA patterns. Slipfitter and Trunnion mounting available. Applications include building facades, displays, landscaping, security lighting, parking areas, walkways and other work areas. Applications include building facades, displays, landscaping, security lighting, parking areas, walkways and other work areas. FLOOD LIGHT FDW27V5KBDB77 FD15W27V5KBDB77 9,5 Lumens 13,4 Lumens W 15W 25W MH 32W MH Up to 24,5 + Lumens Flood Light 15W & 2W Dimensions: 12.42x16.228x3.71in. NEMA FLOOD LIGHT FD15W27V5KBDB77 21, Lumens FD2W27V5KBDB77 24,5 Lumens Heavy duty aluminum trunnion easily adapted to many surfaces and allows easy fixture aiming angles. Wall Mount available for direct wall mounting and J-box mounting Optional for cast aluminum slipfitter mounting adapter 15W 2W Mounting Options NEMA FLOOD LIGHT Up to 4, + Lumens Flood Light 25W & 3W Dimensions:12.42x23.838x3.71in. FD25W27V5KBDB77 36,5 Lumens 25W FD3W27V5KBDB77 4, Lumens 3W Slipfitter Mount An optional cast aluminum mast arm adapter secures fixture head to nominal 2''(2-3/8''O.D. pipe size) horizontal steel tenon arm. Trunnion(Yoke) Mount Die-cast aluminum trunnion is easily adapted to many surfaces and allows easy fixture aiming angles. Wall Mount Wall Mount is easy to install for direct wall mounting with 1/2' conduit wiring or standard J-box mounting 75W MH 1,W MH NEMA DLC qualified at 3K 4K and. LM- certified high performance and reliable lumileds. Voltage is V/347V/4V and support -1V dimmable HOUSING Die-cast aluminum with durable dark bronze power coat finish. Slipfitter mounting, Wall mount and Trunnion mounting. Suitable for use in -4 to. Housing Features a compact, one-piece die cast housing, saving costs versus models that are extruded or cast and require additional parts. The heat sink is included in the actual casting, further minimizing the need for additional parts. Slipfitter Mount An optional cast aluminum mast arm adapter secures fixture head to nominal 2''(2-3/8''O.D. pipe size) horizontal steel tenon arm. Door Frame The door frame is the only additional housing part needed. Tool-less Access option is available for ease of maintenance. LED Light Engine IP66 rated LED light engine eliminates the need for a glass lens for maximum light output. Use of latest generation LEDs means more light from fewer LEDs, resulting in lower costs

9 LED LANDSCAPE (MLS1) Up to 1, + Lumens Landscape 7W & 12W Input 12-24V AC/DC Dimensions: 4.72x2.95x1.27in. The MLS1 landscape light series is ideal for many commercial and residential outdoor applications like landscapes, they efficiently deliver lumens and consume less energy than halogen technologies. Traditional 1/2" NPS threaded adjustable knuckle mounting. Superior housing design optimize thermal management and make it operating at low temperature and long life. LANDSCAPE MLS17W24V3KHDB77 MLS112W24V3KHDB77 6 Lumens 1, Lumens 3K 3K 7W 12W 6W Incandescent 12W Incandescent The MLS1 landscape light series is ideal for many commercial and residential outdoor applications like landscapes, they efficiently deliver lumens and consume less energy than halogen technologies. Traditional 1/2" NPS threaded adjustable knuckle mounting. Superior housing design optimize thermal management and make it operating at low temperature and long life. LANDSCAPE MLS26W24V3KD4 5 Lumens 3K 6W 6W Incandescent MLS21W24V3KD4 65 Lumens 3K 1W 1W Incandescent LED LANDSCAPE (MLS2) Up to 65 + Lumens Landscape 6W & 1W Input 12-24V AC/DC Dimensions: 7.573xØ2.5in. Available with 25 & 4 & 6 BEAM ANGLE 4 4 Up to 1, + Lumens Landscape 2W Input 12-24V AC/DC Dimensions: 7.8x4.42x1.61in. LANDSCAPE MLS12W24V3KHDB77 1, Lumens 3K 2W 5W HID Ground Stake LANDSCAPE MLS14W24V3KHDB77 3,4 Lumens 3K 4W Up to 3,4 + Lumens Landscape 4W Input 12-24V AC/DC Dimensions: 8.26x5.15x2in. Ground Stake Cowl 13 14

10 LED High Bay (MHB1) Up to 26, + Lumens High Bay 14W & 2W Dimensions:Ø15.354x9.579in. The LED circular High Bay is designed to replace 25- high bay fixture, Either hook or conduit pendant install way allows no-extra changes on existing construction. Optional integrated lens or aluminum reflector as per applications. Combined with sensor detect added into the system, more energy would be saved and pretty less maintenance than MH technology. HIGH BAY HB14W27V5KWLD 19, Lumens 14W 72 25W MH HB2W27V5KWLD 26, Lumens 2W 72 Light Distribution Configurations HIGH BAY(MHB1) Up to 24, + Lumens High Bay 14W & 2W Dimensions:Ø15.354x19.441in. HIGH BAY HB14W27V5KMALD 17,5 Lumens 14W 72 25W MH HB2W27V5KMALD 24, Lumens 2W 72 Choose your optical distribution Each optic is designed for a specific purpose Sensor - Screw on, 12V-277V USE: Sensor can be pre-installed in factory or field installed NO.JB-HB1 USE: Suitable for standard J-Box mounting DLC qualified at 4K and. LM- certified high performance and reliable lumileds. Voltage is V/347V/4V and support -1V dimmable Die-cast aluminum with durable dark bronze coat finish. Fits Conduit Pendant mounting or hook mounting directly Suitable for use in -4 to 55. MOUNTING Hook Mount Provided hook offers a anti-shedding screw ensure highest security Conduit Pendant Mount 3/4 conduit entry point is available for pendant mount optional J-BOX Mount Suitable for standard J-box mounting 15 16

11 LED Linear High Bay (MLH1) Up to 22,2 + Lumens Linear High Bay 2 x2 (W&15W&16W) Dimensions: x23.898x2.874in. Up to 43, + Lumens Linear High Bay 2 x4 (2W&32W) Dimensions: 47.48x24.157x2.874in. The HBL SERIES Linear High Bay Fixtures available with lumen outputs from 8, to 43, lumens. Power factor >.9. -1V dimmable standard. These fixtures are ideal one-to-one replacement for conventional HID and T8 and T5 fluorescent fixture with mounting heights ranging from 15 to ceilings, widely used in Warehouse, Factory, Convention Center, Gymnasium etc. LINEAR HIGH BAY 2 x2 HBL22DW27V5KHMD HBL22D15W27V5KHMD HBL22D16W27V5KHMD 11,5 Lumens 13,6 Lumens 22,2 Lumens W 15W 16W ( 4 ) F32 T8 ( 6 )F32 T8 ( 8 ) F32 T8 LINEAR HIGH BAY 2 x4 HBL24D2W27V5KHMD 25, Lumens 2W ( 1 ) F32 T8 HBL24D32W27V5KHMD 43, Lumens 32W ( 18 ) F32 T8 Sensor - Screw on, 12V-277V/12V USE: Sensor can be pre-installed in factory or field installed Emergency backup USE: Emergency backup is preinstalled from factory The HBL SERIES Linear High Bay Fixtures available with lumen outputs from 12,35 to 24, lumens. Power factor >.9. -1V dimmable standard. These fixtures are ideal one-to-one replacement for conventional HID and T8 and T5 fluorescent fixture with mounting heights ranging from 15 to ceilings, widely used in Warehouse, Factory, Convention Center, Gymnasium etc. LINEAR HIGH BAY 1 x2 HBL12D95W27V5KHPD 12,35 Lumens 95W ( 6 ) F32 T8 LINEAR HIGH BAY 1 x4 HBL14D1W27V5KHPD 24, Lumens 1W ( 1 ) F32 T8 LINEAR HIGH BAY(MLH1) LED Linear High Bay (MLH1) Up to 12,35 + Lumens Linear High Bay 1 x2 (95W) Dimensions: 23.9x14.4x2.88in. Up to 24, + Lumens Linear High Bay 1 x4 (1W) Dimensions: 47.55x14.4x2.88in. General distribution (no optics) Clear Acrylic Lens (LCA) option Optics (Narrow, Medium or Aisle) Prismatic Acrylic Lens (LPA) option Wire guard USE: Wire guard is field installed Pendant hanger USE: Pendant with 3/4 conduit UL listed for damp location. DLC qualified at 4K and. LM- certified high performance and reliable lumileds. Voltage is V/347V/4V and support -1V dimmable Die-cast aluminum housing with white coat finish. Conduit or chains Pendant Suitable for use in -4 to 55. Choose your optical distribution Each optic is designed for a specific purpose.the general distribution allows a wash of light in any application. The medium beam is tailored for mid and higher mounting heights. The aisle beam has an asymmetric distribution for aisle or rack areas. General Aisle 1 1 Medium

12 LED Linear High Bay (MLH3) Up to 11, + Lumens Linear High Bay (W) Dimensions: 23.92x1.31x1.83in. The MLH3 SERIES Linear High Bay Fixtures available with lumen outputs from 12, to 24, lumens. Power factor >.9. -1V dimmable standard. These fixtures are ideal one-to-one replacement for conventional HID and T8 and T5 fluorescent fixture with mounting heights ranging from 15 to ceilings, widely used in Warehouse, Factory, Convention Center, Gymnasium etc. LINEAR HIGH BAY MLH3W27V5KCD 11, Lumens W (3) F54T5, (4) F32T8 or 25W HID MESTER LED combines the benefits of LED technology with the features OEMs have come to rely upon in the flagship MVT2 series. The Fixture utilizes gear tray internal construction for cost effectiveness and functional practicality by minimizing required internal metal components. Drivers mount to the driver tray for thermal isolation. The housing is sealed against dust and moisture and available in a variety of lens, latch, and wire-entry configurations VAPOR TIGHT LINEAR 2 MVT23W27V5KPG 3,4 Lumens 3W T8x2 MVT24W27V5KPG 4,3 Lumens 4W T5HOx2 LED Vapor Tight Linear (MVT2) Up to 4,3 + Lumens Vapor Tight Linear 2 (3W & 4W) Dimensions: 25.64x5.x3.68in. Up to 23,5 + Lumens Linear High Bay (13W &1W) Dimensions: 23.92x19.69x1.83in. LINEAR HIGH BAY MLH313W27V5KCD 17, Lumens 13W (4) F54T5, (6) F32T8 or 4W HID MLH31W27V5KCD 23,5 Lumens 1W (6) F54T5 or (8) F32T8 VAPOR TIGHT LINEAR 4 MVT2W27V5KPG MVT26W27V5KPG MVT2W27V5KLB 4, Lumens W T8x2 6,3 Lumens 6W T8HOx2 1, Lumens W T8HOx3 Up to 1, + Lumens Vapor Tight Linear 4 (W & 6W & W) Dimensions: 47.14x5.x3.68in. W operating temperature is -4 to 1 (-4 to 5 ) General 1 Parking Garage 1 PIR Sensor, V USE: Sensor is field installed Sensor - Screw on, 12V-277V USE: Sensor can be pre-installed in factory or field installed Emergency Battery Backup NO. EB-8W/min-1 USE lm min. Only suitable for W, W and W. Steel Wire Rope USE: Chain mounting. UL listed for damp location. LM- certified high performance and reliable seoul. Voltage is V and support -1V dimmable Die-cast aluminum housing with white coat finish. Conduit or chains Pendant Suitable for use in -4 to 55. LM- certified high performance and reliable osram. Voltage is V and support -1V dimmable Die-cast aluminum housing with white powder coat finish. Surface mount or chain mounting. Suitable for use in -4 to 4. Emergency Battery NO. EB-8W/min-1 USE lm min. 19 2

13 LED Linear Fixture (MLF1) Up to 11,1 + Lumens Linear Fixtuer 4 (4W & W) Dimensions: 24x3.x2.88in. (MLF2) Up to 6, + Lumens Linear Fixtuer 4 (3W & W) Dimensions: 24x3.x2.88in. Up to 1,5 + Lumens Linear Fixtuer 8 (6W & W) Dimensions: 48x3.8x2.88in. The new linear fixture series is a linear commercial pendant fixture that deliver maximum light output for most indoor general lighting. Standard -1V continuous dimming driver, combine with sensor would maximize energy saving, also support emergency battery. LINEAR FIXTURE 4 LINEAR FIXTURE 4 LINEAR FIXTURE 8 LFH4F4W27V5KHML LFH4FW27V5KHML 5, Lumens 11,1 Lumens 4W W T5HOx2 T5HOx4 MLF24F3W27V5KF 4, Lumens 3W T8x2 MLF28F6W27V5KF 8, Lumens 6W T8HOx2 MLF24FW27V5KF 6, Lumens W T5HOx2 MLF28FW27V5KF 1,5 Lumens W T5HOx4/T8x4 DESIGNER CANOPY LED The CANOPY LIGHT offer maximum light output for general purpose area and security lighting. They efficiently deliver lumens, and consume less energy than traditional MH technologies. This versatile luminaire is ideal for replacing existing MH fixtures. Applications: Parking structures, storage areas, shopping area walkways, entryway, and low level security. CANOPY CANOPY CPW27V5KDD 4,2 Lumens W CP65W27V5KDD 6,6 Lumens 65W MCP23W27V5KWDC MCP2W27V5KWDC MCP26W27V5KWDC 3,55 Lumens 4,85 Lumens 6,15 Lumens 3W W 6W General 1 Emergency Battery NO. EB-8W/min-1 Parking Garage 1 USE lm min. Emergency Battery NO. EB-8W/min-1 USE lm min. LED Canopy (MCP1) Up to 6,6 + Lumens Canopy W & 65W Dimensions: 9.566x9.566x3.68in. (MCP2) Up to 6,15 + Lumens Canopy 3W & W & 6W Dimensions: 11x11x3in. Sensor - Screw on, 12V-277V/12V USE: Sensor can be pre-installed in factory or field installed Emergency Battery Backup NO. EB-8W/min-1 USE lm min. Steel Wire Rope USE: Chain mounting. Mounting Plate USE Surface mounting. UL listed for damp location. LM- certified high performance and reliable hongli LEDs. Voltage is V/347V/4V and support -1V dimmable Die-cast aluminum housing with white powder coat finish. Surface mount or chain mounting. Suitable for use in -4 to 4. DLC qualified at 4K and under parking garage category. LM- certified high performance and reliable CREE COB. Voltage is V/347V and support -1V dimmable Die-cast aluminum housing with black,white or dark bronze powder coat finish. Pendant or surface mount. Suitable for use in -4 to 4. Sensor - Screw on, 12V-277V/12V USE: Sensor can be pre-installed in factory or field installed 21 22

14 LED Canopy (MCP3) Up to 7,1 + Lumens Canopy 3W & W & 6W Dimensions: 12x12x3.32in. Emergency Battery NO. EB-8W/min-1 USE lm min. The new series Canopy light is ideal for parking garage and security lighting, they efficiently deliver maximum lumens, and consume less energy than tradtional MH technologies. Optional surface mount or conduit pendent installation as per applications, Combined with sensor detect added into the system, more energy woudl be saved and less maintenace than MH technologies. CANOPY MCP33W27V5KDDPG MCP3W27V5KDDPG MCP36W27V5KDDPG 3,6 Lumens 5, Lumens 7,1 Lumens 3W W 6W General 1 Parking Garage 1 The LED Dusk To Dawn offer maximum light output for general purpose area and security lighting. They efficiently deliver lumens, and consume less energy than traditional MH technologies. With its included photocell, mounting arm and direct mounting hardware, these fixtures save you time and money. Applications: Backyards, service road and effective for security and perimeter lighting. DUSK TO DAWN STW27V5KD 4,927 Lumens W 72 STW27V5KD 7, Lumens W 72 LED Dusk To Dawn (MDD1) Up to 7, + Lumens Dusk To Dawn W & W Dimensions: 2.69x17.73x8.98in. Photocell - Button, 12V-277V Occupancy Sensor, V USE: Sensor is field installed LM- certified high performance and reliable lumileds. Voltage is V/347V and support -1V dimmable HOUSING Die-cast aluminum housing available with white or dark bronze coat finish. Pendant or surface mount. Suitable for use in -4 to. DUSK TO DAWN MDD23W27V5KSG 3,3 Lumens 3W MDD242W27V5KSG 4,62 Lumens 42W MDD26W27V5KSG 6,6 Lumens 6W (MDD2) Up to 6,6 + Lumens Dusk To Dawn 3W & 42W & 6W Dimensions: 2.69x17.73x8.98in. COLOR ACCURACY Photocell - Button, 12V/12-277V 23 24

15 LED Area Light (MAL1) Up to 13,4 + Lumens Area Light W & 15W Dimensions: 12.42x18.4x6.988in. MESTER LED Site and Area Light features outstanding photometric performance, excellent uniform illumination, low profile construction, high efficacy and long lifespan. The compact one-piece die-casting aluminum housing with UV resistant powder coat finish offers outstanding corrosion protection. Utilizing the latest LED technology and integrated cooling fins, it's ideal for commercial lighting application. AREA LIGHT ALW27V5KDSQT3 AL15W27V5KDSQT3 MESTER LED Site and Area Light features outstanding photometric performance, excellent uniform illumination, low profile construction, high efficacy and long lifespan. The compact one-piece die-casting aluminum housing with UV resistant powder coat finish offers outstanding corrosion protection. Utilizing the latest LED technology and integrated cooling fins, it's ideal for commercial lighting application. AREA LIGHT MAL215W27V5KDSQT3 MAL22W27V5KDSQT3 LED Area Light (MAL2) Up to 26, + Lumens Area Light 15W & 2W Dimensions: 22.46x12.99x7.99in. 9, Lumens 13,4 Lumens 19,5 Lumens 26, Lumens W 15W 15W 2W 25W MH 32W MH Up to 24,5 + Lumens Area Light 15W & 2W Dimensions: 19.9x11.6x6.988in. AREA LIGHT AL15W27V5KDSQT3 2, Lumens 15W AL2W27V5KDSQT3 24,5 Lumens 2W AREA LIGHT MAL225W27V5KDSQT3 32,5 Lumens 25W 75W MH MAL23W27V5KDSQT3 39, Lumens 3W 1W MH Up to 39, + Lumens Area Light 25W & 3W Dimensions: 31.78x13.39x7.99in. AREA LIGHT Up to 38, + Lumens Area Light 25W & 3W Dimensions: 28.17x12.83x6.988in. AL25W27V5KDSQT3 33, Lumens 25W 75W MH AL3W27V5KDSQT3 38, Lumens 3W 1W MH PIR Sensor, V USE: Sensor is field installed Photocell - 12V-277V 347V/4V LED Area Light (MAL3) PIR Sensor, V USE: Sensor is field installed Photocell - 12V-277V 347V/4V DLC qualified at 4K and. LM- certified high performance and reliable lumileds. Voltage is V/347V/4V and support -1V dimmable HOUSING Die-cast aluminum housing available with dark bronze coat finish. Arm mounted, Wall mount and Slipfitter mounting. Suitable for use in -4 to. distribution Type III, V and IV. AREA LIGHT MAL315W27V5KDSQT3 18, Lumens 15W Up to 18, + Lumens Area Light 15W Dimensions: 21.79x12.4x6.99in

16 Are ideal for use in various architectural environments such as auto dealerships, parking lots, walkways, roadways, campuses, facade lighting, grocery stores and other public areas. KIT Additional Mounting mm(9.99in.) 85mm (3.35in.) mm(7.55in.) Slipfitter Installation kit NO. SPFD4DA USE: For pole mounting. Aluminum mast arm adapter secures fixture head to nominal 2''(2-3/8''O.D. pipe size) horizontal steel tenon arm. Furnished with two 1/2" hex head stainless-steel screw mm(2.75in.) mm(7.84in.) mm(3.54in.) mm(6.97n.) Square Poles Installation kit NO. SQAL1DA-A USE: Standard versatile mounting arm for Area Light application, with K/O to install Photocell or sensor.furnished with two 5/16" hex head stainless-steel bolts and two 1/2" hex head stainless-steel screw. Suitable for 4 & 5 square pole. Standard versatile mounting arm accommodates multiple drilling patterns as well as square and round poles Wall Mount available for direct wall mounting and J-box mounting Optional for die-cast aluminum slipfitter mounting adapter Mounting Options 19mm(.75in.) 87.95mm (3.46in.) 177mm(6.97n.) Round Poles Installation kit NO. SQAL1DA USE: Standard versatile mounting arm for Area Light application, with K/O to install Photocell or sensor.furnished with two 5/16" hex head stainless-steel bolts and two 1/2" hex head stainless-steel screw. Suitable for 4 & 5 round Ploes. Arm Mount Square or Round poles Standard versatile mounting arm is simple to install and can be used with existing poles for retrofit installations. Slipfitter Mount An optional cast aluminum mast arm adapter secures fixture head to nominal 2''(2-3/8''O.D. pipe size) horizontal steel tenon arm. Wall Mount Wall Mount is easy to install for direct wall mounting with 1/2' conduit wiring or standard J-box mounting 1.98mm(7.2in.) 73mm(2.87in.) 188mm(7.4in.) 338mm(13.3in.) Yoke Installation kit NO. YKFD4DA USE: The yoke mount attaches an floodlight(w/15w/15w/ 2W) to almost any surface: wall, roof, or wood pole. It can be used with our 2-3 / 8 "O.D. Tenon mounting bracket (SP-TR-D) to install. Photocontrol Optional photocontrol allows for further energy saving. Housing Features a compact, one-piece die cast housing, saving costs versus models that are extruded or cast and require additional parts. The heat sink is included in the actual casting, further minimizing the need for additional parts. 313mm(12.3in.) 37mm(1.in.) 25W Trunnion Installation kit NO. TRFD4DA USE: The trunnion mount attaches an floodlight(25w/3w) to almost any surface: wall, roof, or wood pole. It can be used with our 2-3 / 8 "O.D. Tenon mounting bracket (SP-TR-D) to install. Standard Arm Mount The design features an integral arm, increasing strength and simplifying installation. PIR Sensor Optional PIR sensor allows for security and energy saving LED Light Engine IP66 rated LED light engine eliminates the need for a glass lens for maximum light output. Use of latest generation LEDs means more light from fewer LEDs, resulting in lower costs. 23mm(7.99in.) Wall Mount Installation kit NO. WMAL1DA USE: Wall Mount is easy to install for direct wall mounting with 1/2' conduit wiring or standard J-box mounting, and with K/O to install Photocell or sensor. Furnished with two 5/16" hex head stainless-steel bolts. 152mm(5.98in.) 27 28

17 POLE BRACKET 76mm(3in.) 6mm(2 3/8in.) 12±1mm(4.in.) Additional Mounting For mounting one fixture on an existing pole 183.6mm(7.228in.) 4" Square Pole Mount with 2-3/8" O.D. Tenon No. 4SQ-SP-D USE: For use with square, non-tapered steel and aluminum poles. Furnished with four 5/16" hex head stainless-steel bolts. Vertical tenon measures 2-3/8" O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally. Mid-Pole tenon Bracket 1mm(7.86 in.) 185mm(7.28in.) 1mm(3.94 in.) 6mm(2 3/8in.) 2-3/8 OD Horizontal Tenon Mid-Pole Bracket NO. SQ-SP-D Finish:Dark Bronze USE:2-3/8 OD Horizontal Tenon Mid-Pole Bracket is designed to mount light fixture that is equipped with a adjustable slipfitter onto a 2-3/8 OD horizontal tenon Round External Mount Horizontal Tenon To mount 2/3/4 fixtures on a existing pole 76mm(3in.) 6mm(2 3/8in.) 127±1mm(5 in.) 183.6mm(7.228in.) 5" Square Pole Mount with 2-3/8" O.D. Tenon No. 5SQ-SP-D USE: For use with square, non-tapered steel and aluminum poles. Furnished with four 5/16" hex head stainless-steel bolts. Vertical tenon measures 2-3/8" O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally. 184mm(7.25in.) 63.5mm(2.5in.) 11.6mm(4in.) 6mm(2 3/8in.) Double Horizontal Tenon Adaptor NO. R6-SP2--D Finish:Dark Bronze USE:The Bracket is designed to mount over 2-3/8 (6mm) O.D. vertical tenon. Two fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally 6mm(2 3/8in.) 222.5mm(8.76in.) 11.6mm(4in.) 16.68mm(4.2in.) 4" Round Pole Mount with 2-3/8" O.D. Tenon NO. 4SQR-SP-D Finish:Dark Bronze USE:For use with Round, non-tapered steel and aluminum poles. Furnished with three 3/8" hex head stainless-steel bolts. Vertical tenon measures 2-3/8" O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally. 184mm(7.25in.) 63.5mm(2.5in.) 11.6mm(4in.) 6mm(2 3/8in.) Double 1 Horizontal Tenon Adaptor NO. R6-SP2-1-D Finish:Dark Bronze USE:The Bracket is designed to mount over 2-3/8 (6mm) O.D. vertical tenon. Two fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally 11.6mm(4in.) 6mm(2 3/8in.) mm(5.19in.) 222.5mm(8.76in.) 5" Round Pole Mount with 2-3/8" O.D. Tenon NO. 5SQR-SP-D Finish:Dark Bronze USE:For use with Round, non-tapered steel and aluminum poles. Furnished with three 3/8" hex head stainless-steel bolts. Vertical tenon measures 2-3/8" O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally. 184mm(7.25in.) 11.6mm(4in.) 6mm(2 3/8in.) Triple Horizontal Tenon Adaptor NO. R6-SP3--D Finish:Dark Bronze USE:The Bracket is designed to mount over 2-3/8 (6mm) O.D. vertical tenon. Three fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally 154.5±1mm(6.8 in.) 63.5mm(2.5in.) 18.6mm(4.28in.) 63mm(2.48in.) WALL BRACKET (4 in.) 12±1mm Attaches to any flat surface Provides wiring access 2-3/8 OD Tenon Mount Adaptor for Yoke Fixtures NO. SP-TR-D USE: The 2-3/8 OD Tenon Mount Adaptor for Yoke Fixtures is designed to mount light fixtures that are equipped with a yoke mount onto a 2-3/8 OD tenon. 6mm(2 3/8in.) 11.6mm(4in.) 63.5mm(2.5in.) 184mm(7.25in.) Triple 12 Horizontal Tenon Adaptor NO. R6-SP3-12-D Finish:Dark Bronze USE:The Bracket is designed to mount over 2-3/8 (6mm) O.D. vertical tenon. Three fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally 12±1mm(4.in.) 227.2mm(7.76 in.) 6mm(2 3/8in.) 152.4mm(6in.) Wall Mount Bracket with 2-3/8" O.D. Tenon NO. WM-SP-D USE: The wall mount bracket with 2-3/8" tenon attaches an floodlight to almost any surface: wall, roof, or wood pole. Provides wiring access and abuilt-in 2-3/8" O.D. tenon to mount a fixture with our adjustable slipfitter. Suggested 3/8" diameter bolts for mounting. Mounting holes are spaced 3-1/4" apart. 6mm(2 3/8in.) 11.6mm(4in.) 63.5mm(2.5in.) 184mm(7.25in.) Quad Horizontal Tenon Adaptor NO. R6-SP4--D Finish:Dark Bronze USE:The Bracket is designed to mount over 2-3/8 (6mm) O.D. vertical tenon. Four fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally 29 3