SBOX2MVA Technical Data Sheet

Transcription

1 SBOX2MVA Technical Data Sheet Key words: Montage on a concrete shape foreseen with cables trench; Montage and replacement of the GFCs and Power Transformer through side doors; Lifting from the bottom full equipped, by crane; 1. KIOSK CONSTRUCTION The Kiosk 1 Welded and reinforced steel frame, pre-coated with primer, and then painted color RAL9003, min. 240 micrometer, two component paint; The paint is C5M and ensures minimum 5 years in maritime environment warranty; The container frame is fitted with ISO corners top and bottom; 2 External walls made of 1,5mm thickness corrugated steel sheet, (the height of corrugation is 25mm); the walls are continuously welded to frame, pre-coated with primer, and than painted color RAL9003, min. 240 micrometer outside and 180 micrometer 4 pcs. inside, two component paint; The paint is C5M and ensures minimum 5 years in maritime environment warranty; 3 External roof made of 1,5mm thickness corrugated steel sheet,(the height of corrugation is 25mm);the roof is continuously welded to frame, pre-coated with primer, and than painted color RAL9003, min. 240 micrometer outside and 180 micrometer inside, two component paint; The paint ensure minimum 5 years in maritime environment warranty; 4 Internal Thermal insulated walls, 80mm thickness, made from metallic sandwich rock-wool type, REI WALL 80 EN60; painted RAL 9002, galvanized steel sheet; 4 pcs. 5 Internal Thermal insulated roof, 80mm thickness, made from metallic sandwich rock-wool type, REI WALL 80 EN60; painted RAL 9002, galvanized steel sheet; 6 Outside floor made from metallic frames 2,5mm thickness continuously welded with cuttings for passing the cables and then painted color RAL9003, min. 240 micrometer, two component paint; insulation to the underside is done with 50mm rock-wool(on the outside); under the electric equipment aluminum caps with flanges (for cable access) are foreseen ; 7 Inside floor made from aluminum demountable tiles 5 mm thickness 1 set 8 Metallic frame for montage of LV and MV switchgear; 1 set 9 Removable canopy above the access doors 1 set 10 Metallic Simple Door made from steel sheets; insulated with mineral wool panels with a thickness of 50mm, meant for TRAI and TRAO compartment access; 2 pcs.

2 11 Double Door for GFC replacement, made from aluminum profile; 4 pcs. 12 Simple Door for equipment room, made from aluminum profile;panic bar on the indoor side; 13 Inlet grilles box, antiinsect screen and CAMFIL filters, mounted on the GFC doors 8 pcs. 14 Inlet grilles box, antiinsect screen and CAMFIL filters, mounted on the wall opposite the access door TRAI 15 Inlet grilles box, antiinsect screen and CAMFIL filters, mounted on the wall opposite the access door TRAO 16 Inlet grilles box, antiinsect screen and CAMFIL filters, mounted on the access door TRAI 17 Inlet grilles box, antiinsect screen and CAMFIL filters, mounted on the access door TRAO 18 Exhaust grilles box, fitted with HJB40; 5200mc/h fan antiinsect screen, gravitational and chevron grilles, G3 filters, mounted at the top of TRAO compartment 19 Exhaust grilles box, fitted with HJB40; 5200mc/h fan, antiinsect screen, gravitational and chevron grilles, G3 filters, mounted at the top of TRAI compartment 20 Exhaust grilles box, fitted with HJB30; 2400mc/h fan, antiinsect screen, gravitational and chevron grilles, G3 filters mounted at the top of GFC 4 pcs. 21 UPS skid 4 pcs. 22 Roof top HVAC DURASEA ROOFTOP 15kBTU (3,5 kw) 23 Schneider logo 5 pcs. Main Equipment 1 MVEDI switchgear 1 pc.s 2 MVEDO switchgear 3 TRAFO - TRAI -10/ 0,4 kv 2,2 MVA MV / LV AF cast resin power transformer fitted with MV surge arrester (FAI1); 4 UPS 500 kw 4 pcs. 5 TRAFO - TRAO -0,4/ 6,6 kv 2 MVA LV / MV AF cast resin power transformer 6 TRAX 16kVA Auxiliary Transformer 7 Automation and Comunication switchboard - ACS 1pcs. 8 LVTP panel 1pcs. 9 LVA Panel 10 NS800A Box Accesories 1 GALV(Battery + Charger; DC Distribution) 2 Smoke detector composed from 1 pc. of CCT57055 and 2 pcs. of (CCT CCT57057) 3 Résistance de point neutre 6,6 kv Ohms (sans I permanent) 4 TC 400 Volts /5-7 VA CL5P20 placed in the busbar 6 pcs. 5 TC 400 Volts - 800/1-7 VA CL5P20 placed in the earth rezistor 6 7 Indoor Hygrotherm transducer, 4-20 ma Jumo fabrication code / /000 5 pcs. 8 Outdoor thermal transducer, 4-20 ma Jumo fabrication code / /330 2 pcs. Red, Blue Light column fitted with buzzer outdoor montage; XVBC12 fixing support; 9 composed of: XVBZ02 black aluminum pipe for fixation; XVBC21 base and cover;

3 XVBC2B4 red led lamp; XVBC2B6 blue led lamp; XVBC9B buzzer; XVBC14 cable in adaptor; Auxiliary contact for coffret code Legrand fabrication; 10 Internal earth belt made of copper bar 25x5 mm with complete connection of all electrical equipment to the earthing belt,; 11 External junction box for connection Internal earth belt with to external grounding circuit; 2 pcs x 36 w neon lamp for indoor lightening; 1 pc. of internal switch for internal lightening command; 6 pcs. 13 8w emergency lamp fitted with batteries for 1hour operating range; 2 pcs. 14 Switch located near entrance door, inside the container, meant for internal lightening command; 4 pcs V ac socket; 3 pcs. 16 EC -5N 5000 W TBD convector with thermo regulator ; 17 Limit Switch XKCP roller plunger, 1NC + 1NO XCKP2012G11 door open sensor; 18 Regular locker with key 1pcs. 19 Internal showcase to display electrical diagrams, mounted on the internal wall; 20 Diagram case mounted on the internal wall; 21 Warning sign fixed on the entrance door; 22 Identification label 23 Rubber carpet on the walk alley 24 Cable glands for outgoing 3 cable diameter 22-54mm;HRD 150-SG-3/22-54; Hauf Technick; under MVEDI panel; 2 pcs. 25 Cable glands for outgoing 3 cable diameter 22-54mm;HRD 150-SG-3/22-54; Hauf Technick; under MVEDO panel; 2 pcs. 26 Cable gland for secondary 6 cables diameter 6-31mm; HRD 125-SG-6/6-31;Hauf Technick; undergcs 2 pcs. 27 Cable gland for secondary 4 cables diameter 8-30mm; HRD 100-SG-4/8-30;Hauf Technick; underlvd 28 Insulating Gloves class 2 (17000V) 1 pair 29 Insulated stol / platform 30 insulating rescue rod PSU-35C 6 35 kv with hook; 31 voltage detection device code DTCIER/P 6 35 kv with rod code PTU 6-20KV ; 32 Fire extinguisher with powder; 2. TECHNICAL CHARACTERISTICS Nr. Feature Values 1 Total Length mm 2 Total Height Total Height without grilles mm mm 3 Total Depth Total Depth without grilles mm 3200mm 4 Total weight full equipped; 32,7 tones 5 Protection degree with grilles closed or open IP 44

4 6 Combustibility class - according IEC A2 7 Smoke emission degree - according IEC S 1 8 Drops and/or burning particles - according IEC D0 9 Fire protection degree according IEC EN Water permeability C class 11 Thermal transfer type 10K 12 Designed to resist on earthquake on Mercalli intensity scale VIII S3a 13 Lifetime 25 years 3. OPERATING CONDITIONS Nr. Feature Values 1 Mounting Outdoor 2 Operating Conditions sea salt C5M 3 Min/Max temperature C / C 4 Average hottest temperature C 5 Average relative humidity 95% 6 Maximum altitude 1000 m

5