MF8 Sparex Replacement Massey Ferguson Parts

Transcription

1 Page - Rear Differential and Related - Housing and Related (Drum Brakes) -0 (Disc Brakes) Differential Lock and Related Rear Rims and Related MF, Differential

2 MF 0 Rear Differential 0 B 0 D A Teeth C Splines 0 S.0 RingGear&Pinion(/") MF,UK,0,,UK,0,,,0,, /Teeth-IncludesBolts&Nuts Ind.0,0C,0D,0,Turf&Utility,,LightDuty (Check Pinion Length) S.0 RingGear&Pinion(/") MF,UK,0,,UK,0,,,0,, /Teeth-IncludesBolts&Nuts Ind.0,0C,0D,0,Turf&Utility,,LightDuty (Check Pinion Length) S. Ring Gear& Pinion M MF(0 SN ~A0),( >Eng SN B),( /Teeth-IncludesBolts&Nuts w/wetbrakes),0,,(,0,>engsnb), Ind.0E,0F,0B,0E,0H,0E,0D,0E,0F,0H,0H S.00 Bolt- Ring Gear M All Models S.000 Nut- Ring Gear M All Models S. Differential Plate w/ Wet Brakes- RH 0M MF(UK Eng SN 0000> w/ Differential Lock), Orchard,,,,0,,,,UK,,0,,0, 0,,,0,Ind.0,0B,0D,0E,0H,,0,0B, (0Ew/PlateBrakes),0A,0C,0D,0E,0F,0H,0H S.0 Differential Plate Gasket M MF,( Orchard, Mallable Axle), 0,( Mallable Axle), UK,,UK,,0,00,Ind.0,,0, S.0 O-Ring 0M MF( Orchard, w/ Cast Axle), UK,(, 0 Cast Axle), Orchard,(0 SN ~A0),(0 SN A0>), Orchard,0,,,,,0,,,, Brazil,UK,,0,,0,,,,0, 0T,,,,,0,0,,,0, Ind.0E,0F,0,0B,0D,0E,0H,,0,0B,0E, 0A,0C,0D,0F,0E,0H,0H S.00 Bearing& Cup Assembly- RH 00M MF UK, UK, UK, UK,,(0 SN A0>), Brg#,Cup#,UK,0,,,m0,0T,,,,, w/ differential Lock Ind. 0F, 0E, 0E, 0E, 0H, 0H S.00 Bearing& Cup Assembly M MF(UK less Differential Lock) Brg#0, Cup# S.0 Bearing& Cup Assembly- RH M MF(UK, UK less Differential Lock), 00, 00, 0, Brg#CBK, Cup#CBK 00, 0, 00, 0, 0T, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 S.0 Cap w/ Differential Lock 0M MF, UK, 0,, UK, 0, 0,,( except Orchard) (0 SN ~A0 w/ - Tooth Ring Gear& Pinion), (0 SN A0 w/ Single Drum Brakes),( except Orchard), Ind.0,0C,0D,(0w/DrumBrakes),,Turf S.0 Cap w/ Differential Lock M MF, Super 0,, 0,, UK,, UK,, 0, Orchard,(0 SN ~A0 w/ - Tooth Ring Gear&Pinion),(0SNA0>w/WetBrakes),Orchard, 0,,,,,0,,,,Brazil,UK,,0,,0,,,,0,0T,,,,, 0,0,,,00,0,Ind.0E,0F,(0w/DiscBrakes), 0B,0D,0E,0H,,0,0B,0E,0,0A,0C,0D,0E, 0F, 0H, 0H, Utility SeepageforInnerBrakeSealS.00

3 0 MF 0 0 Rear Differential D Teeth 0 B A C Splines S.00 Thrust Washer M MF, UK, 0,,,, Super 0,( w/ Differential Lock), ("IDx /"ODx.0"Thick) (UK>SN),0,,UK,(>RearAxleSN CV),(UK, >SN ),(0 > SN CV), (00,0exceptw/-ToothRing&Pinion),(0, > SN DE), 0,( > SN DE), Ind. Turf& Utility,, (Check Dimensions) S.0 Thrust Washer M MF,(UK SN >), 0,, UK,, UK,, ("IDx /"ODx/"Thick) 0,0,,,0,,0,,,,,0,,,,UK,Brazil,,0,,0,,,,,0,0T,,,,,0,0,,,00,0 (00,0,0,w/-ToothRing&Pinion),0,( w/-toothring&pinion),ind.0,0c,0d,0e,0f,0,0b, 0D,0E,0H,,0,0B,0E,0,0A,0C,0E,0F,0H,0H (Check Dimensions) 0 S.0 Gear( Teeth, Spline) M A=/"Length,B=/"Dia C=/"Dia,D=/"Long 0 S.0 Gear( Teeth, Spline) 00M A= /" Length, B= /" Dia C= /" Dia, D=/" Long 0 S.0 Gear( Teeth, Spline) 00M A=/"Length,B=/"Dia C=/"Dia,D=/"Long 0 S.0 Gear( Teeth, Spline) M A= /" Length, B= /" Dia C= /" Dia, D=/" Long S.00 Pinion Gear- 0 Teeth M MF *, UK*, 0*, *, UK*, *, UK*, *, 0*, (/"Dia) 0,,,0,,0,,,,,0,,,,UK,Brazil,,0,,0,,,,0, 0T,,,,,0,0,,,Ind.0D,0E,0F, 0E, 0H, 0H, 0E, 0H, 0H (Check Diameter) S.0 Thrust Washer M Fits Pinion Gears S.00, S.00 M M S.0 Cross Differential M Fits Pinion Gears S.00, S.00 0M M S.00 Bearing- Pinion 0M MF, UK, 0,,, UK, 0,, UK,, UK, (0xxmm) 0M,0,0,,,0,,0,,,,,, 0,,,0,,*,,0*,0T,,,*, *,0,Ind.0,0C,0D,0E,0F,0,0B,0D,0E,0H*,,Turf&Utility,0,0B,0E,0,0A,0C,0D,0E,0F, 0H, 0H,, (*Check Dimensions)

4 MF 0 Rear Differential 0 0 D B A Teeth C Splines 0 S.00 Bearing- Pinion M MF, UK, Brazil,, 0,, *, 0*, *, *, (0xxmm) 0,,,00,0,Ind.0H*(*CheckDimensions) S.00 Bearing Assembly 000M MF *,( w/ Trans SN CL>),, *, UK, *, ( x x mm) 0*, *,(0 SN ~A0),(0 SN A0>),, Cone& Roller#HM0-N *, *, *, *, 0,,,, 0, 0T,,, Cup#HM00-N,,(*Check Bearing Numbers) S. New Style Pinion Locknut Pin M MF UK, 0. 0,, 0,,,,, 0,,,,0,,0,,,,0,0T,,,,, 0,0,,,Ind0,0C,0D,0E,0F,0,0B,0E,, 0,0B,0A,0C S.0 New Style Pinion Locknut M Same as Above S.0 Old Style Differential Pinion Nut 0M MF, 0,,, UK, 0,, UK,, UK,, 0,(0 >SN A),,( >SN A),,( >SN A),( >SNA), Ind, 0 Turf& Utility, 0C, 0,,Turf&Utility,0,0,(0ARearAxle>CD0), Turf& Utility, 00, 00 Forklift, Turf& Utility,(00 Forklift Early Production), 00 Forklift S. Old Style Differential Pinion Washer 0M Same as Above 0 S.0 Bearing Assembly- LH M MF UK, UK, UK, UK,,(0* SN ~A0), Cone& Roller#CBK(mm ID), M (0 SN A0> w/ Drum Brakes), Ind. 0E*, 0F*, 0H*, 0F, Cup#CBK(mm OD) M 0H*, 0H*(*Check Bearing Numbers) 0 S. Bearing Assembly- LH 00M MF(0* SN ~A0),(0 SN A0> w/ Wet Brakes), Cone&Roller#(mmID),,UK,0,,,,0,0T,,,,, Cup#0(mm OD) Ind. 0F*, 0H, 0F, 0E*, 0E*, 0H*, 0H*,(0H, 0H S&T), (*Check Bearing Numbers) S. Plate- LH M MF 0.(0 Late Production),, 0,( SN L0>), Ind.0Ew/PlateWetBrakes),0H,(0Ew/PlateWetBrakes), 0E,0H(0H,0HS&T)

5 MF 0 Housing 0 S.0 Dipstick( /" Long) M MF UK, UK, 0,, 0,, 0,,,,, 0, 0M,,, UK, Brazil,( SN A>), 0,, 0,,,,0,0T,,,Ind.(0CSNA>), 0D, 0E, 0F,(0B SN A>), 0D, 0E,(0B SN A>), 0E,(0C SN A>), 0D, 0E S.0 Gasket - Side Plate M MF, UK, 0,,, UK, 0,, UK,, UK,,0,0,,,0,,0,,,,0,,,,,0,,0,,,Ind.0,0C,0E, 0F,0B,0D,0E,,0,0B,0E,0,0A,0C,0D,0E,0F, 0,Turf&Utility,, S.0 Gasket - Lift Cover 0M MF, UK, 0,,(UK SN 0),(UK, >SN ), (.0" Thick) Ind. Turf& Utility,, 0, 0 S.0 Gasket - Lift Cover M MF,(UK SN 0>), 0,,,(UK, SN >), (.00"Thick) 0,0,,,,,,,Ind.0,0C,0E,0F,0,0B, 0D,0E,0H,,0,0B,0,0A,0C,0F,0H,0,0H, S. Loctite - Gasket M Eliminator#-0mlTube S. Needle Bearing(#) M MF, UK, 0,,, UK, 0,, UK,, UK,,0,0,,,0,,0,,,,0,,,,UK,Brazil,,0,,0,,,,0,0T,,,,,0,0,,,00,0,Ind.0,0C,0D, 0E,0F,0,0B,0D,0E,0H,,0,0B,0E,0A,0C,0D, 0E,0F,0H,0H,,,0,0 S. Abutment M MF UK, 0,, 0,, 0,,,, 0,,,,UK,Brazil,,0,,0,,,,0,0T,,,,,0,0,,,00,0,Ind.0,0C,0D, 0E,0F,0,0D,0E,0H,0,0B,0E,0A,0C,0D, 0E,0F,0H,0H S. Spring M Same as Above S.0 Shaft- Includes Needle Bearing M MF( >SN A),,(,, 0, 0T WD),( WD), (0/Spline-/"Long) (,,WD),0F,0H,HX,0H(wd), S.00 Coupling- Groove 0M MF, UK,(0 SN 0> Low Clearance, SN 0> (" Long- /" Dia) 00M High Clearance),( >SN 0), UK,, Ind. Turf& Utility S.0 Coupling- Groove M MF 0,,, 0,(0 SN ~A0 w/ Speed), ("Long-/"Dia) (0SNA0>>EngSNB),(exceptOrchard), (0,w/outSpacer),Ind.(0,0Cw//"LongSpline on Pinion), 0D S.0 Coupling- Groove 000M MF(UK Speed),(UK >SN 0), UK, ("Long-/"Dia) 0 S.00 Cotter Pin(/" X ") X Fits Couplers S.00, S.0, S.0, S.0 S. Shaft- Pump to IPTO Clutch M MF(0 SN ~A0),( >SN A w/ Cab),,,,Ind.0E,0E,0E,0H,0H

6 MF Housing 0 0 S.0 Needle Bearing(# Brg) M MF(0 SN ~A0),( >SN A w/ Cab),,,,Ind.0E,0E,0E,0H,0H S.0 Gasket M MF UK, UK, UK,, 0, 0,, 0,,, 0M 0, 0,,,, 0, 0T,,, 0, 0, Ind.0D,0E,0F,0E,0H,0E,0E,0F,0H,0H S. Center Housing M MF, 0,( Prior SN A), 0,( SN A00>), NOTE: Part no. stamped on, 0, 0,(0 Prior SN T0),(0 WD Prior SN T0), rightsideofhousing (0 WDPriorSNT00),0C,0D,(0Bw/RearAxle SNCE>),0E,(0Cw/RearAxleSNCE>),0F S. Peg- Hydraulic Pump Support 00M MF, UK, 0,, *, 0*, *,, Ind Turf& Utility,, 0, 0(*Check Dimensions) S.0 Peg- Hydraulic Pump Support M MF *, UK, 0*, *,(UK less Hand Brake),, UK, (/"- /" Stepped Peg) M, 0, 0,,,(0 less Wet Brakes),, **,,, 0,,,Brazil,,0,,0,,,,0, 0T,,,,,0,0,,,00,0, Ind.0,0C,0D,0,0E,0H,,0*,0,0A,0E,0F,0H, 0H, *, (*Check Dimensions),(**w/ Ergonomic Pedals) S.0 Peg- Hydraulic Pump Support M MF UK, UK,,(0 w/ Wet Brakes), 0, *,, w/handbrake,,uk,ind.0f,0b,0d,0e,,0,0b,0e, 0C, 0D, 0E,(*w/ Classic Pedals) S.0 Gasket 00M MF, UK, 0,,( >SN A000), UK, 0, (UK >SN A000), UK,( Early Production), UK,,(0 > SN FZ),(0 Early Production), 00, Ind.0,(0C,0,EarlyProduction),Turf&Utility, (0 Early Production), 0,,, 0, 0 S.00 O-Ring M MF( SN A000>), UK,( SN A000>), UK,( Late Production),(0 SN FZ>), (0 Late Production),,, 0,, 0,,,, 0,,,,UK,Brazil,,0,,0,,,,0,0T,,,,,0,0,,,0, Ind.(0C Late Production), 0D, 0F, 0, 0B, 0D, 0E, 0H, (LateProduction),0,0B,0E,0A,0C,0D,0E,0H,0H S.0 Plunger- PTO Detent 0M MF, UK, 0,,, UK, 0, UK,, UK,,0,(0>SNA),,,0,,,,0,,UK,Brazil,0,,,,0,Ind.0,0C,0D, 0F,0,0E,,0,0E,0E,,,Turf&Utility,0,, 0, 0 0 S. Spring- PTO Plunger M Same as Above S.0 Gasket(" OD) M MF,(UK SN >), 0,,( except Orchard), UK, 0, *,(UK less Differential Lock), *, UK,, 0*, 0,,( except Orchard),(0 w/ Drum Brakes), (exceptorchard),00,ind.0,0c,0d,0,*,0*,,utility,turf&utility,0,0,0(*w/malleableaxle)

7 MF 0 Housing 0 S.0 O-Ring 0M MF Orchard, *,(UK w/ Differential Lock), *, 0*, Orchard,(0 w/ Wet Brakes), Orchard, 0,,,,,0,,,,UK,Brazil,, 0,,0,,,,0,0T,,,,,0, 0,,,0,Ind.0E,0F,0,0B,0D,0E,0H,*, 0*,0B,0E,0A,0C,0D,0E,0F,0H, 0H,(*w/CastAxle) S.000 Linch Pin S.000 Hinged Pin 00M MF, UK, 0,, UK, UK, UK,,, 0, 0,,,,UK,,,,0,0T,,,,, Ind.0E,0E,0E,0E, S. Lever- PTO M MF 0, 0,, 0,,, Ind. 0D, 0F, 0E, 0E, 0E S. Knob- PTO M Same as Above S.0 Roll Pin(/" x /") X Same as Above

8 MF (Drum Brakes) 0 S.0 Shim- Steel(.00") M MF, UK, 0,, UK, 0, 0,,, 0,, Ind.0,0C,0D,0Turf,,,Turf&Utility,0,0 S. Shim- Paper Gasket(.00") M Same as Above S.0 Gasket- Trumpet Housing M S.000 Shaft- Lift Arm Attaching M MF, 0,,(UK Early Production), Vineyard ( /" Overall) Ind.(0, 0 Early Production), Turf& Utility,,, 0, 0 S.0 Shaft- Lift Arm Attaching M MF(UK Late Production), 0,,( except Vineyard), ( /" Overall) 0,, Ind.(0, 0 Late Production), 0C, 0D S.0 Nut- Slotted(/" UNF) X Fits Shaft S.000 S.0 Nut- Slotted(/" UNF) X Fits Shaft S.0 S.0 Nut- Self-Locking(/" UNF) 0X Fits Shaft S.000, S.0 S.0 Adaptor- Dual Wheel 0M MF, UK, 0,, UK, 0, 0,,, 0,, (/"UNF-/Long) Ind.0,0C,0D,0,,Turf,Turf&Utility,0,0 S.0 Nut- Rear Wheel(/" UNF) 000M Same as Above S.0 Stud(/" UNF) 00M Same as Above S.0 Axle( Spline- /" Spline) 0M MF, UK, 0, 0,,, 0,, Ind.0,0C,0D,0Turf,,Turf 0 S.0 Seal- Outer M MF, UK, 0,, UK, 0, 0,,, 0,, (/"x/"x/") Ind.0,0C,0D,0Turf,Turf&Utility,,Turf S.0 Bearing& Cup Assembly M MF, 0,, UK, 0, 0,,, 0,, (Brg#A,Cup#X) Ind.0,0C,0D,0Turf,Turf&Utility,,Turf S.0 Collar- Shrink-on 0M Same as Above S.0 Seal-Inner(/x/x/") M SameasAbove S.0 Kit- Includes: Same as Above Seals S.0x, S.0x, Collar S.0x, Bearing Assembly S.0x

9 MF 0 0 (Disc Brakes) S.00 Shaft- Lift Arm Attaching M MF Normal Duty, 0,, UK,, UK,, 0, 00, M Ind. 0,, 0 S.0 Nut- Slotted(/" UNF) X Same as Above S.0 Nut- Self Locking(/" UNF) X Same as Above S. Cone- M MF( SN > Lo-Clearance),( SN 000> Hi-Clearance), (0 Diesel Row Crop),( w/ Pinion Planetary) S. Spacer- M Same as Above S. Needle- per Axle M Same as Above S. Bearing Assembly- M MF Inner Planetary M S.0 Bearing Assembly- M MF Orchard, 0,, UK,, UK,, 0, Orchard, Inner Planetary M (0 Wet Brakes), Orchard, 0,( SN B00>),,, 0, Brg#CBK, Cup#CBK 000X,,, UK, Brazil,, 0,, 0,,,, (/"x/") 0,0T,,,,,0,0,,,00,0, Ind.0E,0F,0,0B,0D,0E,,0,0B,0E,0,0A,0C, 0D, 0F, 0H, 0H, Utility S. Seal- Inner Planetary M MF, 0*,( w/ Pinion Planetary)(*Check Dimensions) (/"x/"x/") S.0 Seal- Inner Planetary M MF Orchard, 0*,( w/ Pinion Planetary),, UK, (/"x/"x/"),0,orchard,(,,w/drybrakes), SpringinSealw/DrainHole Ind.(0,,0w/DryBrakes)(*CheckDimensions) S.0 Seal- Inner Planetary 0M MF(UK SN 0000>), Orchard,(,, w/ Wet Brakes), (/"x/"x/") Brazil,(w/WetBrakes),,0HD,,,0,,, SpringsinSeallessDrainHole (0w/WetBrakes),Ind.(0w/WetBrakes),0B, (0D,0w/WetBrakes),0B,0A,0C,0D,0 S. Seal- Inner Planetary 00X MF S, S, V, S, S (0 x 0 x 0mm) M S. Seal- Inner Planetary X MF -F (0x00xmm) S.00 Seal- Inner Brake Housing 0M MF,,, Super 0, Orchard, 0,,, 0, (.0" x." x.") M Orchard,,(, w/ Dry Brakes),( >SN A w/ Dry Brakes),( SN A>),(0 w/ Dry Brakes), Ind.(0,,0w/DryBrakes)0,Utility 0 S.0 Shaft- Lift Arm Attaching M MF(UK SN 0000>), 0, 0,,, 0,,, UK, (/"x/") M 0,0,,,,0,0T,,,0,0, Ind.0E,0F,0E,0E,0E

10 MF (Disc Brakes) 0 0 S.00 Cotter Pin 0X MF(UK SN 0000>), 0, 0,,, 0,,, UK, (/x/") 0,0,,,,0,0T,,,0,0, Ind.0E,0F,0E,0E,0E S. Seal- Outer Cover M MF, 0*,( w/ Pinion Planetary)(*Check Dimensions) (/"x/x/") S.0 Seal-Outer Cover 0M MF Orchard, 0*,(UK w/ Pinion Planetary), UK,, (/xx/") M UK,,0,Orchard,(0w/WetBrakes),Orchard, 00M 0,,,,, 0,,,, UK, Brazil,, 0,,0,,,,0,0T,,,,,0,0,,,00,0,Ind.0E,0F,(0MallableAxle),0B,0D,0E, 0H,,0,0B,0E,0,0A,0C,0D,0E,0F,0H,0,0H, w/." Planetary Ring Gear) S. Bearing Assembly- M MF Orchard, 0,,, 0, Orchard, Orchard, 0, Outer Planetary 0M,,, 0,, UK, 0, 0,,, 0, 0T,, M,0,0,Ind.0F,0,0B,0D,0E,,0,0B,0E*,0,0A, 0C, 0D, 0E*, w/." Planetary Ring Gear)(*Normal Duty) S. Bearing Assembly- M MF,,,, 00, 0, Ind. 0E, 0E, 0F, 0H, 0, 0H Outer Planetary M Brg#, Cup#0 00M S. Housing- Planetary M MF Orchard,,(UK SN 0000>),, 0, Orchard, ( Spline- Gear Type) (0 SN ~A0 w/ Wet Brakes), Orchard, 0, (>EngSN0-0-),,,,0,,,,UK, 0,0,,,,0,0T,,,0,0,Ind.0E,0F, 0,0B,0D,0E,0H,,0,0B,0D*,0A,0C,0D,0E* (*Normal Duty) S.0 Gasket- Planetary Ring Gear M MF,, Super 0, Orchard, 0,, UK,, UK, M, 0, Orchard,(0 SN ~A0 w/ Wet Brakes), Orchard,0,,,,,0,,,,Brazil, 0,0,(,0,0T>SNB00),,0,0,00, Ind.0E,0F,0,0B,0D,0E,0H,0,0B,0E,0,0A, 0C,0D,0E,0F,0H,0,0H S.0 Thrust Washer Planetary Gear M MF Orchard, 0*,, UK,, UK,, 0, Orchard, (.0" x." Long) (0 SN ~A0 w/ Wet Brakes), Orchard, 0,,,,,0,,,,UK,Brazil,0,0,,,,0,0T,,,0,0,Ind.0E,0F,0,0B,0D,0E, 0H,,0,0B,0E,0,0A,0C,0D,0E,0F,0H, 0, 0H, Utility(*Check Length) S.00 Needle Roller( per Gear) M MF,,, Orchard, 0,, UK,, UK,, 0, Orchard,(0 SN ~A0 w/ Wet Brakes), Orchard,0,,,,,0,,,,UK,0, 0,0,Ind.0E,0F,0,0B,0D,0E,0H,,0,0B,0E,0, 0A,0C,0D,0E,0F,0H,0,0H,Utility S.0 Gear- Planetary( Teeth) M Same as Above(w/out,, )

11 MF 0 0 (Disc Brakes) S. Shaft- Planetary Pinion Gear 0M MF, 0, (Note: Check Dimensions& Descritpion) (.0" Dia,." Length) M SolidPinw/SnapRingGrooves S. Shaft- Planetary Pinion Gear M MF Orchard, 0,, UK,, UK,, 0, (.0" Dia,." Length) Ind. 0,, 0, 0, Utility End Threaded w/ Tapered Hole (Note: Check Dimensions& Descritpion) for Set Screw S. Shaft- Planetary Pinion Gear M MF Orchard,, UK,, 0, Orchard, 0, (.0" Dia,." Length) Orchard, 0,,,,, 0,,,, EndThreadedw/ThruHole UK,Brazil,0,0,,,,0,0T,,, forrollpin (w/00.eng),0,0,ind.0e,0f,0,0b,0d,0e, 0H,,0,0B,0E,0A,0C,0D,0E,0F,0H,0,0H, (Check Dimensions& Descritpion) 0 S. Gear- Planetary Sun 00M MF Orchard, 0,, UK,, UK,, 0, ( Teeth,- Spline) Orchard,(0 SN ~A0 w/ Wet Brakes), Orchard,0,,,,,0,,,,UK, Brazil,0,0,0,Ind.0E,0F,0,0B,0D,0E,0H,, 0,0B,0E,0,0A,0C,0D,0E,0F,0H,0,0H,Utility S. Axle Shaft MF Orchard,(0 w/ Gear Planetary& Wide Planetary Ring Gear),( w/ Gear Planetary),, 0, Orchard, (0 SN ~A0), Orchard, 0,,,,, 0,,,UK,0,0,,,,0,0T,,, 0,0,Ind.0E,0F,0,0B,0D,0E,0H,, 0,0B,0E, 0,0A,0C,0D,0E, S.0 Stud- M MF,, Super 0, 0,, (/"UNF-."Length) Ind.0B,0,0A,0C,0D,0(CheckLength) S.0 Stud- 0M MF Orchard, 0,, UK,, UK, 0, Orchard, (/" UNF-." Length) M (0 SN ~A0 w/ Wet Brackes), Orchard, 0,,,,,,0,Ind.0E,0F,0,,0B,0D,0,0B,0C,0D,0 S. Stud- Rear Wheel M MF(0 SN ~A0 w/ Wet Brackes), 0,, 0,, (/"UNF-."Length) UK,0,,0,,,,0,0T,,,,, 0, 0,,, Ind. 0E, 0F, 0E(Check Dimensions) S.0 Nut- Rear Wheel Stud M Fits S.0 Stud (/"UNF-/"Deep-/Hex) S.0 Nut- Rear Wheel Stud M Fits S.0 Stud (/"UNF-/"Deep-/Hex) S. Nut- Rear Wheel Stud M Fits S. Stud (/"UNF-/"Deep-/Hex) S.0 Nut- Dual Wheel Adaptor M (/"UNF x /" UNF) S.0 Nut- Dual Wheel Adaptor (/"UNF x /" UNF) 0

12 MF Differential Lock S.0 Cam& Shaft Assembly 00M MF, UK, 0,, UK, 0 Standard, 0,,, (0w/DrumBrakes),,Ind.0C,0D,0,Turf&Utility, Turf S. Shaft M MF(UK SN >),(0 SN ~A0),( Orchard, >SNA),0,,,(,w/WetBrakes), 0,,,UK,Brazil,(w/WetBrakes),0,, 0,0,,,0,Ind.0E,0F*,(0,0B,0D,w/CastAxle), 0E,0H,(,0w/WetBrakes),0B,0E,(0Aw/RearAxle SNCD0),0C,0D,0E,0F,0H*,0*,0H* (*Used w/ Washer#M 0mm Dia x mm Thick) S.0 Cap w/ Differential Lock 0M MF, UK, 0,, UK, 0, 0,,( except Orchard) (0 SN ~A0 w/ - Tooth Ring Gear& Pinion), (0 SN A0 w/ Single Drum Brakes),( except Orchard), Ind.0,0C,0D,(0w/DrumBrakes),,Turf S.0 Cap w/ Differential Lock M MF, Super 0,, 0,, UK,, UK,, 0, Orchard,(0 SN ~A0 w/ - Tooth Ring Gear&Pinion),(0SNA0>w/WetBrakes),Orchard, 0,,,,,0,,,,Brazil,UK,,0,,0,,,,0,0T,,,,, 0,0,,,00,0,Ind.0E,0F,(0w/DiscBrakes), 0B,0D,0E,0H,,0,0B,0E,0,0A,0C,0D,0E, 0F, 0H, 0H, Utility S.0 Coupler 0M MF(UK SN 0>), 0,( SN 00000>), UK, 0 Standard, 0,,,(0 w/ Drum Brakes),, Ind.0Turf,0C,0D,0Turf,Turf&Utility,Turf S.0 Coupler 00M MF Orchard, 0*,,, UK,, 0, Orchard, 0, Orchard,0,,,,,0,,,,UK, Brazil,,0,,0,,,,0,0T,,,,,0,0,,,(00CastAxle),0,Ind.0E,0F, 0,0B,0E,0D,0E,0H,(MalleableAxle),0,0B,0E,0A, 0C, 0D, 0E, 0F, 0H, 0, 0H, Utility(*Check Tooth Count) S.00 Seal- Differential Lock Shaft M MF, Super 0, Orchard, 0,( Mallable Axle), UK, (/"x/"x/") (MallableAxle),UK,,0,Ind.(0,,0MallableAxle), 0, Utility S.0 Selector Fork 0M MF, UK, 0,, UK, 0 Standard, 0,,, (0w/DrumBrakes),,Ind.0Turf,0C,0D,0Turf,Turf S.0 Selector Fork 00M MF,( Cast Axle),(UK SN >),(, 0 Cast Axle), Orchard,(0w/WetBrakes),Orchard,0,,,,,0,,,,UK,Brazil,,0,,0,,,,0,0T,,,,,0,0,,, (00CastAxle),0,Ind.0E,0F,(0,0B,0DCastAxle),0E, 0H,,(0CastAxle),0B,0E,0A,0C,0D,0E,0F,0H,0,0H S.0 Shoe- Fork 00M MF, UK, 0,, UK, 0 Standard, 0,,, (0w/DrumBrakes),,Ind.0Turf,0C,0D,0Turf,Turf

13 MF Rear Rims 0 S.0 Rim-x",Loop S. Rim-0x",Loop S. Rim-x",Loop S. Rim-x",Loop S. RimAssembly-0x" MF,0,,0,,Ind.Turf&Utility,Utility,0,0 Includes: S. S. RimAssembly-"x" M MF0,,,,,Ind.0C,0D,0,0B,0D,0, Lug M Center: 0,, S.0 Rear Rim- " x 0" M MF 0,,, 0, 0T Lug(/"Holesc-c), Drop Center, " Center Disc S. "Disc-Loops-/"Dia., 0M MF,0,,0,,Ind.Turf&Utility,Utility,0,0 Lugs-"Dia.BoltPattern, (x,0x,x&xrims) /" Center Hole S.0 RimtoDiscBolt&Nut RimtoDisc Pipped Head(/") S. RimtoDiscBolt&Nut Carriage Head Bolt(/") S.0 Weld-on Lug Tractors with Standard Rims S. Carriage Head Bolt Bridle Bolt/ Power Adjusted Rims (/x/"unc) 0 S. Bridle- Clamp 0M Power Adjusted Rims- Most Models M 0M S. Stop MFUK,,-,(0w/xRim),Brazil,,, 0,0T,,,,(0w/0"Rim),00,00,0,00, 00, Power Adjusted Rims S. Screw/ Stop Power Adjusted Rims- Most Models