PARTS CATALOG 0CW10-G22800

Size: px

Start display at page:

Download "PARTS CATALOG 0CW10-G22800"

Claude McKenzie
5 years ago
Views:

1 PARTS CATALOG Published 00/ (Feb.) 0CW0-G00

3 Directions for the Parts Catalog..The parts stipulated in this Parts Catalog are not necessarily standard equipped parts..parts may change without prior notice. 3.The following is an example of the Parts Catalog format. 0CF0-G60 9. FUEL INJECTION PUMP(W/BOOST) (A)=JH-DT JH-DTZ JH-DTZP JH-DTZA JH-DTZY (C) (D) (E) (A) (B) FUEL INJECTION PUMP FUEL INJECTION PUMP N (A=E005) (B=E0000) SCREW M 6X SCREW M 6X 6 K (A=E0056) (B=E0056) (C=E0056) (D=E0056) (E=E0056) CAMSHAFT BEARING, ROLLER RETAINER 3 5 Remarks () BOOST COMPEMSATOR TYPE. OPTIONAL PART, TO E0055,(JH-DT, JH-DTZ 3 5 Ref. No. The Ref. No. listed may not be in accordance with the illustration Ref. No. (Ex.) Illustration No. List Ref No. (Before change) - (After change) For interchangeable symbols N, R and K, illustrations for new parts may be abbreviated. Lev. (Level) Level indication The numbers below indicate the level of relativity towards the main part Main parts (Assembly parts) Sub component included in Sub component included in. Note) Parts that are not for sale are partially illustrated but not listed. Interchangeability Mark When a part change takes place, one of the following interchangeability symbols is indicated beside the part. Symbol N Q R S W Z F K Interchangeability Old Yes No New No Old Yes New Old Yes Yes New Old No No New Contents note New Part is interchangeable for Old Part but Old Part is not interchangeable for New Part. New Part is not interchangeable for Old Part but Old Part is interchangeable for New Part. New/ Old Parts are both interchangeable. New/ Old Parts are both not interchangeable. Part newly added. Part discontinued. Not interchangeable by a single part but interchangeable together with related parts. Changes only for used parts quantities. Effective Machine No. When a part changes, the effective Machine No. will be indicated in the (A)- column. Product Symbol Product No. Product Symbol Product No. C Clutch No. Compressor No. F Machine No. (Agricultural Equip.) D Drive No. M Machine No. E Engine No. Note ) Date Note ) A date may follow the symbol. (Ex.) Note ) XXX are for parts that could not be predicted or for engine models that could not be identified. Note 3) (A=E005) is the E (Engine Serial Number) for the column (A) model (in this case JH-DT) after the parts design change. Remarks Mark Figures or alphabets (symbols) are entered in the remarks column. The comments (remarks) on parts that are indicated at the bottom of the illustration are the same symbols as those stated above.

4 MODEL : TNV06-GGE CONTENTS PC NO : 0CW0-G00 Fig.No. GROUP NAME TNV06-GGE. CYLINDER BLOCK. GEAR HOUSING 3. FLYWHEEL HOUSING & OIL SUMP. CYLINDER HEAD & BONNET 5. SUCTION MANIFOLD 6. EXHAUST MANIFOLD 7. CAMSHAFT & DRIVING GEAR. CRANKSHAFT & PISTON 9. LUB.OIL SYSTEM 0. LUB.OIL LINE. COOLING WATER SYSTEM. FUEL INJECTION PUMP 3. GOVERNOR. FUEL INJECTION VALVE 5. FUEL LINE 6. STARTING MOTOR 7. GENERATOR. GASKET SET Fig.No. GROUP NAME

5 0CW0-G00 Fig.. CYLINDER BLOCK 0CW0-G00. CYLINDER BLOCK (A)=TNV06-GGE BLOCK ASSY, CYLINDER PLUG BOLT,CAP,MAIN-BEARIN BUSH JOINT, PIPE SPRING PIN 6X PLUG PT3/,STEEL PLUG PT3/,STEEL PLUG * PLUG PLUG BEARING ASSY, THRUST BOLT, CYLINDER HEAD GASKET, HEAD BEARING ASSY, MAIN MAIN BEARING US= BEARING,THRUST.5OS 3 Remarks () REPAIR PART. () UNDER-SIZED(U.S=0.5)PART. (3) OVER-SIZED(O.S=0.5)PART.

6 0CW0-G00 0CW0-G00. GEAR HOUSING Fig.. GEAR HOUSING (A)=TNV06-GGE COVER ASSY,GEAR CASE SEAL, GEAR CASE COVER, FIP HOUSING,GEARS PUMP ASSY, L.O STUD M0X 3 PLATED COVER, HO-P O-RING P O-RING P PARALLEL PIN X O-RING A P O-RING A G PACKING, BOLT M X 0 PLATED BOLT M X 0 PLATED BOLT M X 0 PLATED BOLT M X 5 PLATED BOLT M X 5 PLATED BOLT M X 50 PLATED BOLT M X 70 PLATED BOLT M X 0 PLATED BOLT M0X PLATED NUT COVER,FILLER O-RING A P COVER, BLIND O-RING A S BOLT M 6X 6 PLATED

7 0CW0-G00 0CW0-G00 3. FLYWHEEL HOUSING & OIL SUMP Fig.3. FLYWHEEL HOUSING & OIL SUMP (A)=TNV06-GGE PARALLEL PIN X COVER ASSY,FLYWHEEL COVER CAP CAP, FLYWHEEL COVER R (A=*009.) BOLT M X 6 PLATED BOLT M0X 35 PLATED SEAL, FLYWHEEL PAN COMP,LUB.OIL DRAIN PLUG M SEAL WASHER S BOLT M X PLATED BOLT M X 6 PLATED

8 0CW0-G00 Fig.. CYLINDER HEAD & BONNET Remarks () REPAIR PART. 0CW0-G00. CYLINDER HEAD & BONNET (A)=TNV06-GGE LIFTER LIFTER BOLT M0X 0 PLATED BOLT M0X 5 PLATED SEAT A,VALVE BRIDGE HEAD ASSY, CYLINDER PLUG PT /6,SCREW PLUG PT/,SCREW PLUG PT3/,SCREW PLUG VALVE(INT VALVE(EXH VALVE SPRING RETAINER, SPRING SEAL, VALVE STEM(EXH SEAL, VALVE STEM(INT BRIDGE ASSY,VALVE NUT MXP SCRWE,VALVE BRIDGE GUIDE,VALVE BRIDGE COTTER ASSY GUIDE,VALVE(SUC GUIDE,VALVE(EXH PROTECTOR, NOZZLE SEAT, NOZZLE RETAINER,F.I.VALVE FLANGE BOLT,RETAINER O-RING A P SUPPORT ASSY, ARM SHAFT,ROCKER ARM SUPPORT A SUPPORT B WAVE WASHER ARM ASSY, ROCKER SCREW, VALVE NUT MXP ARM ASSY, ROCKER SCREW, VALVE NUT MXP RETAINER,F.I.VALVE STUD M X 30 PLATED STUD X BOLT M X 75 PLATED NUT COVER,FILLER BONNET ASSY BAFFLE PLATE BAFFLE BAFFLE DIAPHRAGM,BREATHER CENTER PLATE ++ CONTINUE ++

9 0CW0-G00 Fig.. CYLINDER HEAD & BONNET 0CW0-G00. CYLINDER HEAD & BONNET (A)=TNV06-GGE PLATE,BREATHER SPRING, DIAPHRAGM PACKING,BONNET PLUG SCREW 5X0,TAPPING SCREW 5X0,TAPPING KNOB O-RING A P O-RING A P-3.0 Remarks () REPAIR PART.

10 0CW0-G00 0CW0-G00 5. SUCTION MANIFOLD Fig.5. SUCTION MANIFOLD (A)=TNV06-GGE MANIFOLD,AIR INTAKE PACKING(INT.MANIFOLD BOLT M X 70 PLATED JOINT GASKET,AIR HEATER GASKET,AIR HEATER HEATER AIR BOLT M0X 5 PLATED

11 0CW0-G00 0CW0-G00 6. EXHAUST MANIFOLD Fig.6. EXHAUST MANIFOLD (A)=TNV06-GGE PK(EXH MANIFOLD,EXHAUST BOLT 0X FLANGE BOLT,0X STUD 0X NUT PACKING

12 0CW0-G00 0CW0-G00 7. CAMSHAFT & DRIVING GEAR Fig.7. CAMSHAFT & DRIVING GEAR (A)=TNV06-GGE TAPPET PUSH ROD CAMSHFT ASSY METAL,THRUST(CAM GEAR, CAMSHAFT KEY 7X BOLT X PLATED SHAFT(GEAR,IDLE GEAR ASSY, IDLE BOLT M X 55 PLATED BOLT GEAR,F.I.PUMP FLANGE SPRING WASHER NUT M,LOCK

13 0CW0-G00 Fig.. CRANKSHAFT & PISTON 0CW0-G00. CRANKSHAFT & PISTON (A)=TNV06-GGE CRANKSHAFT ASSY GEAR, CRANKSHAFT PARALLEL PIN PARALLEL PIN 0X KEY 7X BOLT, V-PULLEY WASHER V-PULLEY, CRANKSHAFT O-RING A S BOLT, FLYWHEEL FLYWHEEL ASSY 70-0 RING GEAR Z= PISTON W/RING RING SET, PISTON PIN, PISTON CIRCLIP ROD ASSY, CONNECTING BOLT, ROD METAL ASSY, CRANKPIN METAL, PISTON PIN BEARING,PIN U.S= PISTON W/RING OS= RING SET O.S=0.5 3 Remarks () REPAIR PART. () UNDER-SIZED(U.S=0.5)PART. (3) OVER-SIZED(O.S=0.5)PART.

14 0CW0-G00 Fig.9. LUB.OIL SYSTEM 0CW0-G00 9. LUB.OIL SYSTEM (A)=TNV06-GGE COOLER ASSY, L.O O-RING BRACKET COMP, COOLER PACKING BOLT, L.O.COOLER COCK ASSY / BOLT M X 0 PLATED DIPSTICK, LUB.OIL GUIDE, DIPSTICK FILTER 0X00L PIPE ASSY,L.O.INTAKE O-RING C P BOLT M X 30 PLATED BOLT MX 6 PLATED Remarks () REPAIR PART.

15 0CW0-G00 0CW0-G00 0. LUB.OIL LINE Fig.0. LUB.OIL LINE (A)=TNV06-GGE PIPE, LUB.OIL SUPPORT,PIPE BOLT 0, PIPE JOINT GASKET, ROUND GASKET 0, ROUND JOINT BOLT BOLT M X PLATED SEAL WASHER S BOLT M X PLATED VALVE ASSY, CHECK NOZZLE SPRING PIN 3X SWITCH,(0.5KG)L.O.

16 0CW0-G00 0CW0-G00. COOLING WATER SYSTEM Fig.. COOLING WATER SYSTEM (A)=TNV06-GGE PUMP ASSY, WATER JOINT PLUG, DRAIN R PLUG PT/,STEEL BALL /, STEEL PACKING CASE,WATER PUMP O-RING P ELBOW R3/ BOLT M 6X 50 PLATED BOLT M X 55 PLATED BOLT M X 70 PLATED PULLEY, FAN VEE-BELT, INCH FAN, COOLING SPACER BOLT M0X 5 PLATED CASE ASSY,THERMOSTAT BOLT, PIPE JOINT THERMOSTAT GASKET COVER GASKET JOINT GASKET, ROUND PLUG PT3/,SCREW BOLT M X 5 PLATED GASKET GASKET, ROUND BOLT M X PLATED BOLT M X 60 PLATED PIPE, C.W PIPE, C.W PROTECTER,CW-T CLAMP PLUG M SWITCH, THERMO(0 C GASKET GASKET PIPE, C.W. A(MP CLAMP,CW-T PIPE A,COOLING WATER CLAMP CORRUGATED TUBE PIPE, C.W. B(MP PIPE B,COOLING WATER CLAMP BOLT M 6X PLATED

17 0CW0-G00 Fig.. FUEL INJECTION PUMP Remarks () GOVERNOR ASSY(FIG.3) IS INCORPORATED IN THIS FUEL INJECTION PUMP.(REF.NO.). 0CW0-G00. FUEL INJECTION PUMP I (A)=TNV06-GGE INJECTON PUMP ASSY KEY 5X STOPPER O-RING O-RING SETTING, DELIVERY W (A=*00.0.) SPRING JOINT, COOLING WATER PLUG PLUG PK(BARREL PLUG PLUG PLUG,WATER PUMP PACKING, PLUG LIFTER TIMER SET TIMER CMP O-RING, BACKUP RING O RING PACKING, RING, BACKUP T P PACKING, HEAD SPRING,TIMER ELEMENT, THERMO JOINT O-RING,P PACKING,TIMER PISTON DAMPER ASSY PLUG SEAL WASHER SEAL WASHER PLUG M,HEX PUMP ASSY,FEED O-RING(FEED P INNER O-RING O-RING E S SEAL WASHER SEAL WASHER SEAL WASHER SPRING WASHER PARALLEL PIN 5X SPRING PIN 5X JOINT BOLT 6,PIPE O-RING A P PACKING, O RING BOLT 6X 0 PLATED BOLT M 6X 35 PLATED ++ CONTINUE ++

18 0CW0-G00 Fig.. FUEL INJECTION PUMP 0CW0-G00. FUEL INJECTION PUMP (A)=TNV06-GGE BOLT M0X NUT M,LOCK JOINT JOINT, PIPE RETAINER,MP RETAINER,MP BOLT M X 6 PLATED BOLT M X 0 PLATED BOLT M X 0 PLATED BOLT M0X 6 PLATED Remarks () GOVERNOR ASSY(FIG.3) IS INCORPORATED IN THIS FUEL INJECTION PUMP.(REF.NO.).

19 0CW0-G00 Fig.3. GOVERNOR 0CW0-G00 3. GOVERNOR (A)=TNV06-GGE PACKING, CASE PACKING O-RING S NUT SPRING RETAINER LEVER, REGULATOR BOLT, IDLE LIMIT RETAINER, SHAFT BOLT 6X 0 PLATED BOLT 6X 0 PLATED LOCK NUT O-RING SEAL WASHER 6S PLUG 6,HEX BOLT M 6X PLATED BOLT M 6X 5 PLATED BOLT M 6X 0 PLATED COVER, CASE SOLENOID, STOP Remarks * THIS FIGURE(GOVERNOR ASSY)IS INCORPORATED IN THE FUEL INJECTION PUMP ASSY(FIG.).

20 0CW0-G00 0CW0-G00. FUEL INJECTION VALVE Fig.. FUEL INJECTION VALVE (A)=TNV06-GGE FUEL INJECTOR VCH NOZZLE ASSY NUT, NOZZLE CASE HOLDER ASSY, NOZZLE SPRING, NOZZLE SEAT, NOZZLE SPRING PLATE, STOP PIN SHIM PACK PIPE SEAL RETAINER BRACKET SUPPORT,F.I.PIPE PIPE ASSY, INJECTION PIPE ASSY, INJECTION PIPE ASSY, INJECTION PIPE ASSY, INJECTION BOLT M 6X 0 PLATED BOLT M X 0 PLATED

21 0CW0-G00 0CW0-G00 5. FUEL LINE Fig.5. FUEL LINE I I I I I I (A)=TNV06-GGE BRACKET,FUEL FILTER FILTER, FUEL OIL BOLT M X 30 PLATED PIPE, FUEL PROTECTOR, FUEL PIPE PIPE,FUEL (D3XL500) PIPE ASSY, FUEL OIL PIPE,FUEL (D3XL00) TUBE CLAMP CLAMP PIPE ASSY,F.O.RETURN JOINT BOLT M PIPE, FUEL RETURN PACKING,FUEL RETURN HOSE JOINT SEAL WASHER S GASKET, ROUND JOINT BOLT PUMP ASSY, FUEL FEED SEPARATOR ASSY CUP(CLEAR ELEMENT PLUG,DRAIN PLUG,BREATHER PACKING,BREATHER FLOAT O-RING A P O-RING A G-75.0

22 0CW0-G00 0CW0-G00 6. STARTING MOTOR Fig.6. STARTING MOTOR (A)=TNV06-GGE STARTER V,3KW ARMATURE ASSY COIL ASSY, FIELD SCREW, POLE CORE SET O-RING BRUSH (+) COVER, REAR HOLDER, BRUSH SPRING, BRUSH BRUSH (-) SWITCH ASSY,MAGNETIC HOUSING, GEARS RETAINER, BEARING SHIFT LEVER SET COVER ASSY, DUST THROUGHT BOLT BOLT M6X SCREW MX PINION ASSY CLUTCH ASSY 3 X06000 BALL BEARING ( SHAFT, PINION STOPPER KIT, PINION TERMINAL COVER BOLT M 6X BOLT MX 5 PLATED

23 0CW0-G00 0CW0-G00 7. GENERATOR Fig.7. GENERATOR (A)=TNV06-GGE BOLT M0X0 (GEN GENERATOR(V-60A ROTOR ASSY BALL BEARING REAR BRACKET ASSY FRONT BRACKET ASSY PULLEY SCREW KIT DISTANCE PIECE WASHER 0,POLISHED NUT ADJUSTER(BELT BOLT BOLT (M X L5) DIODE RELAY, GROW TIMER TIMER

24 0CW0-G00 Fig.. GASKET SET 0CW0-G00. GASKET SET (A)=TNV06-GGE GASKET SET(NON-ASB.) GASKET, HEAD O-RING P O-RING P O-RING A P O-RING A G PACKING, O-RING A P O-RING A S SEAL WASHER S SEAL, VALVE STEM(EXH SEAL, VALVE STEM(INT PROTECTOR, NOZZLE SEAT, NOZZLE O-RING A P PACKING,BONNET PACKING(INT.MANIFOLD GASKET,AIR HEATER GASKET,AIR HEATER PK(EXH PACKING O-RING A S PACKING O-RING C P GASKET, ROUND GASKET 0, ROUND SEAL WASHER S PACKING O-RING P GASKET GASKET GASKET GASKET GASKET PACKING,FUEL RETURN FLEX HONE F GASKET.LIQUID Remarks () OPTIONAL PART.

25 Part Number Index All parts are stipulated in the order of part numbers. (Depending on the area in which the part is used.) This index will display the location of the part according to each part number.

26 MODEL : TNV06-GGE PARTS No. INDEX PC NO : 0CW0-G00 PARTS No. Fig. Ref.No. PARTS No. Fig. Ref.No. PARTS No. Fig. Ref.No. PARTS No. Fig. Ref.No

27 MODEL : TNV06-GGE PARTS No. INDEX PC NO : 0CW0-G00 PARTS No. Fig. Ref.No. PARTS No. Fig. Ref.No. PARTS No. Fig. Ref.No F X PARTS No. Fig. Ref.No. - -

PARTS CATALOGUE RESERVDELS KATALOG ERSATZTEIL KATALOG CATALOGUE DE PIECES SERIES 4TNV98T-GGE

PARTS CATALOGUE RESERVDELS KATALOG ERSATZTEIL KATALOG CATALOGUE DE PIECES SERIES 4TNV98T-GGE CONTENTS Model : 4TNV98T-GGE Fig.No. GROUP NAME ENGINE SECTION. CYLINDER BLOCK 2. GEAR HOUSING 4TNV98T-NSA,NSA2