STATE OF THE ART SMART! WHAT S INSIDE PRODUCT CATALOG and SUGGESTED RETAIL PRICING ASSA ABLOY

Transcription

1 2001 PRODUCT CATALOG and SUGGESTED RETAIL PRICING THE WORLD S FINEST ELECTRONIC DOOR CONTROL SYSTEMS and COMPONENTS, ALL BACKED UNCONDITIONALLY BY THE INDUSTRY S BEST WARRANTY YOU LL NEVER NEED. Featuring ISO 9001 World Quality Standard A5066 WHAT S INSIDE MAGNALOCKS... 2 SHEAR ALIGNING MAGNALOCK (SAM)...10 UNLATCH ELECTRONIC STRIKE...12 TOUCH SENSE EXIT DEVICES...15 EXIT CONTROL / PUSH BUTTONS...17 MOTION DETECTOR EXIT PACKAGE (XMS-1)...19 KEYSWITCHES...21 DIGITAL ENTRY SYSTEMS...23 POWER TRANSFER DEVICES...27 POWER SOURCES...29 TIMERS...33 INDUSTRIAL CABINET LOCKS MAXIMUM SECURITY SWITCH (MSS)...37 LATCH / BOLT MONITOR...39 LOCK CONTROL PANELS...41 EXIT DELAY SYSTEMS...43 PRODUCT LISTINGS BY ALPHA PART NUMBER...47 CONTACT US...50 STATE OF THE ART SMART!...51 STATE OF THE ART SMART! An ASSA ABLOY Group company ASSA ABLOY

2 2 MAGNALOCKS MAGLOCK ( ) MAGNALOCKS The Electromagnetic Lock System That Will Outlast Your Building Model 34R Model 32 Model 62 SAM the Shear Aligning Magnalock 2 Model 82 MAGNALOCK OVERVIEW Magnalocks are designed to secure any type of door or gate that closes against a fixed stop. The product consists of an electromagnet which mounts on the fixed frame and a strike plate which mounts on the moving door or gate. The strike plate is delivered with fasteners that permit it to flex so that when the door closes, it automatically self aligns with the magnet. Magnetic force then takes over, strongly securing the door. Release is achieved by switching off power to the magnet. CHOOSE THE INDUSTRY LEADER Securitron has been making electromagnetic locks since 1971 and has stayed at the forefront thanks to a continuing program of engineering improvements. In security industry trade journals, both installing dealers as well as end users have consistently chosen the Magnalock as the most highly preferred product. We attribute this not only to the product s features but to its proven performance in demanding applications. SELECT FROM A COMPLETE FAMILY Model 34 The Model 32 and 34 series provide 600 pounds traffic control security similar to electric strikes, and are recommended for applications where a physical assault on the door is not expected. Primary advantages of the Model 32 and 34 are lower cost and more compact size. For sliding doors, the Model 34R series offers recessed mounting and results in 600 pounds of esthetically concealed holding power. The Model 62 series offers higher security with 1,200 pounds holding force. Entry cannot be forced without special tools, or before the door or frame gives way. It s recommended not only for high security openings, but for outdoor use on all gate types, too. At 1,800 pounds, the Model 82SC series puts out maximum MagPower! Applications for the Model 82SC include prison facilities, or anywhere an extra margin of strength is required. Model 82SC is also effective on large exterior gates; or with a split strike plate on double doors. The incredible Shear Aligning Magnalock SAM for short permits concealed mounting in aluminum, wood and steel doors for the ultimate in finished appearance. SAM delivers 1,000 pounds holding force, maintains swing through operation on double-acting doors, and even works on motorized bi-parting doors! ELECTROMAGNETIC LOCKS HIGH TECHNOLOGY MEANS PERFORMANCE IN YOUR APPLICATION Creating the world s best electromagnetic lock calls for serious engineering. During its years of continued development, the Magnalock family has incorporated an array of advanced features (both physical and electronic) that have made it what it is today. Along the way, it has earned two separate U.S. patents and an impressive list of certifications. PHYSICAL CONSTRUCTION AND MOUNTING A lock should be tough. The Magnalock comes in a stainless steel case and all ferrous metal surfaces are plated to military specifications. A 10 ft. integral cable makes wiring easy and the Magnalock is at home indoors or out. Mounting is via hardened machine screws into self-collapsing blind nuts (four screws with the Model 62 and 82SC; two with the Model 32 and 34). Mounting screw holes are closed off

3 An ASSA ABLOY Group company with tamper caps. Sheet metal screws which can work free are not used at all. Even the strike sex bolt has a massive 1-1/4" diameter head. While the standard mounting hardware resists casual vandalism and is considerably stronger than the holding force of the Magnalock, Securitron can supply tamper proof hardware as an option for high vandalism areas. Securitron tamper proof fasteners require special tools for installation and removal. We can supply these tools for hand or battery drill operation. Models 34R and SAM shear lock require mortising. ELECTRONIC PERFORMANCE First, Magnalocks are remarkably efficient in power use. The 62 series operates on only 3 watts. (250 ma at 12 VDC or 125 ma at 24VDC.) The 32 series uses 3-1/2 watts. (300 ma at 12 VDC or 150 ma at 24 VDC.) The 34 series, 82 series and SAM draw only 4 watts. This benefit is especially important when large numbers of Magnalocks are operated from a central power supply connected to the fire alarm system. Magnalock efficiency generates large cost savings in wire gauge, power supply and battery backup costs. Second, internal electronics eliminate problems often found in other designs. We reverse out residual magnetism and accelerate field collapse so that inductive kickback and EMI are suppressed so there s no arcing over control switches or interference with nearby electronic devices. Ferrous metal aging which could lead to stickiness over time is blocked. A U.S. patent has been granted on the Magnalock s internal electronics. THE BENEFITS OF SECURING DOORS WITH MAGNETIC FORCE ALONE Electromechanical strikes and locks have been around longer, but magnetic locks are increasingly dominating the industry. Why? We see four answers: Reliability, Security, Safety and Simplicity of Installation. Reliability. Anything mechanical wears out. The Magnalock has MAGNALOCKS no moving parts and therefore possesses an unlimited operating life. Not many products perform for decades with no attention, but you can get this performance when you select the Magnalock. In addition, the Magnalock is unmatched in functional reliability. It releases every time when switched off, as there is nothing to jam. Because of its selfaligning strike, it secures every time the door closes. Problems of stiff latches and misaligned bolts simply don t exist. Security. Electromechanical strikes and locks are positioned between the door and frame. They can be successfully attacked with a saw, or by spreading the door from the frame with a lever. The Magnalock mounts on the other side of the door from an intruder. The intruder must defeat the door itself to get at the lock. And in addition, the holding force of the Magnalock can be selected by choosing the appropriate model to exceed the strength of the door. Mounting position of the Magnalock at the top of the door enhances security by allowing the door to flex during an impact attack. Extremely stiff doors, like those found in prisons, can benefit from the EASB Magnalock accessory which creates a shock absorbing effect (see Magnalock options). Safety. Magnalocks are often employed to secure doors that are also emergency exit paths. In the event of a fire, it is vital for life safety that the doors immediately release to permit evacuation. This is done by routing the lock DC power through auxiliary contacts operated by the building fire alarm system. When the fire alarm activates, power is removed from all the locks. As there is nothing to jam, the Magnalocks release every time. Installation Simplicity. The Magnalock surface mounts using only a drill and allen wrench. There is no routing, mortising or carpentry work needed. It also effortlessly handles all the unusual situations where electromechanical locks and strikes don t work: Narrow stile doors, double doors, roll-up doors, solid glass doors, badly fitting doors, swinging or sliding gates of all types. Bring them on! Smart dual voltage. All Magnalock models except Model 32 automatically determine and adapt to 12 or 24 volt power by drawing the correct amount of current. There is no possibility of mis-wiring. 3 Model 32SC mounted vertically on an aluminum frame glass door, exterior view. Model 32 mounted vertically on an aluminum frame glass door, interior view. Model 62 in a vertical mount on an aluminum frame glass door. Shown with TSB-3 Exit Bar and Model DK-26SS digital keypad. 3

4 4 MAGNALOCKS MAGLOCK ( ) MAGNALOCK OPTIONS SENSTAT: A LOCK THAT MONITORS ITSELF Securitron s patented Senstat option provides a lock status sensing signal which positively indicates that the door is secure. This interfaces with access control or alarm systems and is superior to the commonly used door switch which indicates that the door is closed but not that it is secure. Model 62G mounted on a concrete filled steel door frame using the CWB-62 bracket. FULL LENGTH HOUSINGS Wiring diagram for Senstat Magnalocks. Magnalocks can be optionally furnished in full-length housings to provide the ultimate in security and finished appearance. Housings may be selected in vertical or horizontal configurations with one or two locks. The addition of the second lock is either for enhanced security, or for a double door. The completed installation provides unmatched architectural appearance and vandal resistance and security. Full-length housings provide the ultimate in security and esthetics. The unique mounting design allows the use of new or existing locks. Single and double versions are available. The Z bracket on this inswinging door includes a dress cover for an architecturally attractive appearance. Model 62SCF shown. The Official Factory Installation Kit makes any installation quicker and more accurate. It even includes an enlightening step-bystep system installation video! 4 Magnalocks may be manufactured in a full-length housing to provide the ultimate in security and esthetics. HHSR-32-36, Horizontal Single Housing, Model 32, 36 long, right hand reverse.

5 An ASSA ABLOY Group company MAGNALOCK OPTIONS FACE MOUNT VERSION INSWINGING DOOR MOUNT Magnalock Model 32F Face Mounted version. Standard Magnalocks are suspended from the door frame so that the door swings away from the magnet body, This is the preferred mounting method, but if the door swings into the protected area, security considerations may dictate that the lock is mounted on the inswinging side of the door. The F option provides for face mounting on the header above the door. Mounting holes are drilled through the magnet face and the wire exit is to the rear. The Z-32/34/62 and 82 bracket is normally used with F Magnalocks. DOUBLE MAGNET CONFIGURATION MAGNALOCKS For double doors without a central mullion, the DM-62 supplies two model 62 Magnalocks in a single brushed stainless steel housing for the ultimate in architectural appeal. The 22" wide housing provides adequate lock separation for internal obstructions often found in double doors, and electrically, the two locks are controlled as one. Securitron s Senstat lock status reporting option is also available on the DM-62. The Double 62 5 Magnalock Model 82SCF Face Mounted version. CONDUIT FITTING OPTION Magnalock Model 82SCFG with Universal Conduit Fitting. The G option (available on the 62 and 82 series only) adds a 1/2" female-3/4" male universal conduit fitting to allow conduit wiring for outdoor installations. The G version is also useful for surface wired installations on concrete filled door frames. This avoids the cost of drilling a wire way in the concrete. ENERGY ABSORBING HARDWARE OPTION Energy Absorbing Sex Bolt (EASB) for Model 62 or 82SC Magnalock. The EASB is specifically designed for high security applications on stiff doors (such as prison doors) where the door opens outwards into the protected area. This permits an impact attack (as opposed to pulling the door). When the door is quite rigid, the force of the impact transmits well to the lock. The EASB replaces the standard sex bolt and includes a powerful internal spring which absorbs and dissipates the force of the blow, replicating Magnalock performance on a more flexible door and preserving optimum security. HARDWARE ACCESSORIES Magnalock Model 62G with Universal Conduit Fitting. RECESSED, CONCEALED MOUNTING Magnalock Model 62FG Face Mounted version. For many applications like sliding doors only a totally invisible finished appearance will do. Models 34R and SAM accomplish the job with minimum installation hassle. The SlimLine Model 34R The Stop Filler Plate is used in installations where only part of the magnet body is on the stop. The plate extends the stop to provide a flat mounting surface for the magnet. Stop Filler Plates are 8 (Models 32 and 62) or 12 long (Model 82) with a varying thickness to match the stop thickness. Thicknesses offered are: 1/4, 3/8, 1/2 and 5/8 with a finish suffix of CL for clear anodized aluminum or BK for black anodized aluminum. The Glass Door Bracket permits Magnalock installation on a solid glass door. The bracket is permanently glued to the glass via a special adhesive. The strike plate then screws into the bracket, as glass doors cannot be drilled. The part numbers are: GDB (bracket) and AKG (adhesive kit). 5

6 6 MAGNALOCKS MAGLOCK ( ) The Aluminum Frame Shim Bracket is for use with aluminum frame glass doors. The bracket spaces the magnet body down 1/2 to clear the blade stop and provides alternate mounting hardware for the strike plate as with the magnet body spaced down, the standard sex bolt can interfere with the glass. The part numbers are ASB-32/62/82 with a finish suffix, or BK for black anodized aluminum. The Universal Header Bracket is used to extend a narrow header (often found on aluminum frame glass doors) to permit mounting of the Magnalock. The bracket is positioned either to extend 1 or 1-1/2 and also serves to conceal the hookup cable within its hollow interior. Model UHB works with Model 32, 34 or 62 series Magnalocks and the longer UHB-82 works with the Model 82. Both with a finish suffix of CL for clear anodized aluminum or BK for black anodized aluminum. The Concrete/Wood Frame Bracket is used on concrete filled or wood door frames. On concrete frames, the bracket anchors to the frame via sheet metal screws and the magnet mounts to the bracket via machine screws. The bracket includes a central splice area and avoids the problem of drilling a wireway through the concrete. On wood frames, 4 wood screws are employed to penetrate deeply into the header. Separate part numbers are used for the Model 32, 62, and 82 series Magnalock CWB-32, CWB-62, CWB-82 with a finish suffix of CL for clear anodized aluminum or BK for black anodized aluminum. A wide array of Hardware Installation Accessories make putting a Magnalock anywhere easy! And don t forget World Famous MAGLOCK support for instant installation help, advice and even custom wiring diagrams. 6 Dress Covers are separately available for the Model 32, 34, 62 and 82 series Magnalock. They install in seconds using structural foam adhesive and perform three functions: The Cover improves the appear-

7 An ASSA ABLOY Group company ance of the installation by concealing the strike and also improves tamper resistance. Finally, the Covers are available in four finishes allowing easy alteration of the Magnalock finish to suit architectural considerations. The part numbers are: DC-32/34/62/82CL (Clear anodized aluminum). DC-32/34/62/82BK (Black anodized aluminum). DC-32/34/62/82BP (Polished brass). DC-32/34/62/82SP (Polished stainless). Double Dress Covers are available in two finishes which will cover a pair of Magnalocks on a double door assuming they are separated by not more than two inches. MAGNALOCKS 7 DDC-32/34/62CL (Clear anodized aluminum). DDC-32/62/34BK (Black anodized aluminum). Offset Strikes are available for the 62 & 82 series only. The offset strike alters by 1/4 the position of the mounting hole which is occasionally necessary for certain narrow aluminum glass doors to avoid the sex bolt hitting the glass. Split strikes allow a single 62 or 82 series Magnalock to secure a double door at traffic control holding force level. Model 62 Magnalock is shown in horizontal mount with an anodized Dress Cover and Universal Header Bracket on an aluminum frame glass door. The following locks are available with Offset Strikes by adding -OS to the end of the part number: M62-OS; M62G-OS; M62SC-OS; M62SCG- OS; M82SC-OS; M82SCG-OS The following locks are available with Split Strikes by adding -SS to the end of the part number: M62-SS; M62G-SS; M62SC-SS; M62SCG- SS; M82SC-SS; M82SCG-SS The part numbers are: AOS-62 (Offset strike w/fasteners). No upcharge when ordered with the Magnalock. ASS-62; ASS-82 (Split strike set w/fasteners). Upcharge applies when ordered with the Magnalock. Weatherproof Magnalock Strike Plates are constructed of premium materials. Z Brackets are separately available for the 32, 62 and 82 series F version Magnalock and allow mounting on an inswinging door. The Bracket includes a cover which gives the installation an attractive finished appearance. The assembly is available in three finishes. The part numbers are: B A C Z-32/34/62/82SS (Brushed stainless steel cover). Z-32/34/62/82CL (Clear anodized aluminum). Z-32/34/62/82BK (Black anodized aluminum). The surface mounted Magnalock family requires only a drill and allen wrenches for mounting. All fasteners are of the socket cap type for greatest strength and professional results. Tamper proof fasteners are available as an option (consult the factory). Magnalocks come with a complete fastener set which includes flush finish tamper caps (A) and a tool (B) for collapsing the blind nuts (C). 7

8 8 MAGNALOCKS Model 62 or 82 on metal frame assembly with Universal Header Bracket and Stop Filler Plate MAGLOCK ( ) Patents U.S. patents granted on Senstat feature and internal electronics #4,516,114 & #4,682,801 EASB patent no. 5,758,913 ORDERING INFORMATION 8 Model 62 and Model 32 Magnalocks with mounting fastener assembly. Magnalock armature, mounting hardware and fastener assembly. TECHNICAL DATA Holding Force 82SC series: 1,800 lbs Kg. 62 series: 1,200 lbs Kg. 34 series: 600 lbs Kg. 32 series: 600 lbs.- 273Kg. Operating Environment -40 to 60 C, -40 to 140 F. Suitable for outdoor use (NEMA 4X equivalent). All ferrous metal surfaces plated to MIL spec. Magnet case: brushed stainless steel standard. Power Required 82SC series: 350 ma at l2 VDC or 175 ma at 24 VDC 62 series: 250 ma at 12 VDC or 125 ma at 24 VDC 34 series: 350 ma at 12 VDC or 175 ma at 24 VDC 32 series: 300 ma at 12 VDC or 150 ma at 24 VDC Voltage tolerance: -10% +30%, unregulated acceptable. Dimensions Model 82SC Magnet: 12" x 3" x 1-3/4 Strike: 10" x 2-3/4"x 1/2" Model 62 Magnet: 8" x 3 x 1-3/4" Strike: 6' x 2-3/4"x 1/2 Model 34 Magnet: 9-3/4 x 1-3/4 x 1-1/8 Model 34R Magnet: 9-1/2 x 1-1/2 x 1-1/8 Strike: 6-3/8 x 1-7/16 x 7/16 Model 32 Magnet: 8" x 1-3/4" x 1-1/2" Strike: 6-1/2" x 1-5/8"x 1/2" Model 62 Model x 76 x 44.5mm 254 x 70 x 12mm 203 x 76 x 44.5mm 152 x 70 x 12mm 241 x 38 x 28.5mm 241 x 38 x 28.5mm 162 x 36.5 x 11mm 203 x 44.5 x 38mm 165 x 41.5 x 12mm Approvals and Listings Underwriter s Laboratories: SA6635 and BP7041 and R13976 Underwriter s Laboratories of Canada: CMS140, SA6635 and BP7041 TUV (Germany): Baumuster Gopruft California State Fire Marshall: :101 City of New York MEA: 25195E & E BHMA certified NYC Board of Standards and Appeals; SA City of Cleveland: S-5-89 US Veteran s Administration:M.P.3 Part III US Defense Department: Listed 82SC, 62, 34 (Dual Voltage) (12 Volts) or (24 Volts) Add F for face mount version (Inswinging door). Add SC for Senstat Form C version (Model 82 comes standard). Add G for conduit fitting (not available with 32 and 34R ). MAGNALOCKS Part Number Description Price M lb. 12VDC $ M lb. 24VDC $ M32F lb. 12VDC Face Mount $ M32F lb. 24VDC Face Mount $ M32SC lb. 12VDC Senstat Form C $ M32SC lb. 24VDC Senstat Form C $ M32SCF lb. 12VDC Face Mount Senstat form C $ M32SCF lb. 24VDC Face Mount Senstat form C $ M lb. Dual Voltage $ M34F 600 lb. Dual Voltage Face Mount $ M34R 600 lb. Recessed Dual Voltage $ M34RSC 600 lb. Recessed Dual Voltage Senstat Form C $ M34SC 600 lb. Dual Voltage Senstat $ M34SCF 600 lb. Dual Voltage Face Mount Senstat $ M lb. Dual Voltage $ M62F 1200 lb. Dual Voltage Face Mount $ M62FG 1200 lb. Dual Voltage Face Mount Conduit Fitting $ M62G 1200 lb. Dual Voltage Conduit Fitting $ M62G-OS 1200 lb. Dual Voltage Conduit Fitting w/offset Strike $ M62G-SS 1200 lb. Dual Voltage Conduit Fitting w/split Strike $ M62-OS 1200 lb. Dual Voltage w/offset Strike $ M62SC 1200 lb. Dual Voltage Senstat $ M62SCF 1200 lb. Dual Voltage Senstat Face Mount $ M62SCFG 1200 lb. Dual Voltage Senstat Face Mount Conduit $ M62SCG 1200 lb. Dual Voltage Senstat Conduit $ M62SCG-OS 1200 lb. Dual Voltage Senstat Conduit/Offset Strike $ M62SCG-SS 1200 lb. Dual Voltage Senstat Conduit/Split Strike $ M62SC-OS 1200 lb. Dual Voltage Senstat w/offset Strike $ M62SC-SS 1200 lb. Dual Voltage Senstat w/split Strike $ M62-SS 1200 lb. Dual Voltage w/split Strike $ DM lb. 62 Double, Dual Voltage $ DM62SC 1200 lb. 62 Double, Dual Voltage Senstat Form C $ M82SC 1800 lb. Dual Voltage Senstat $ M82SCF 1800 lb. Dual Voltage Senstat Face Mount $ M82SCFG 1800 lb. Dual Voltage Senstat Face Mount Conduit $ M82SCG 1800 lb. Dual Voltage Senstat Conduit Fitting $ M82SCG-OS 1800 lb. Dual Voltage Senstat Conduit/Offset Strike $ M82SCG-SS 1800 lb. Dual Voltage Senstat Conduit/Split Strike $640.00

9 An ASSA ABLOY Group company Part Number Description Price M82SC-OS 1800 lb. Dual Voltage Senstat w/offset Strike $ M82SC-SS 1800 lb. Dual Voltage Senstat w/split Strike $ HARDWARE ACCESSORIES HHD-32 Full Length Housing Model 32 Dbl. Horizontal $ HHD-62 Full Length Housing Model 62 Dbl. Horizontal $ HHD-82 Full Length Housing Model 82 Dbl. Horizontal $ HHSL-32 Full Length Housing Model 32 Single Lefthand Reverse $ HHSL-62 Full Length Housing Model 62 Single Lefthand Reverse $ HHSL-82 Full Length Housing Model 82 Single Lefthand Reverse $ HHSR-32 Full Length Housing Model 32 Single Righthand Reverse $ HHSR-62 Full Length Housing Model 62 Single Righthand Reverse $ HHSR-82 Full Length Housing Model 82 Single Righthand Reverse $ HVD-32 Full Length Housing Model 32 Dbl. Vertical $ HVD-62 Full Length Housing Model 62 Dbl. Vertical $ HVD-82 Full Length Housing Model 82 Dbl. Vertical $ EASB-34 Sex Bolt Energy Absorbing Model 34 $80.00 EASB-62 Sex Bolt Energy Absorbing Model 62 $ EASB-82 Sex Bolt Energy Absorbing Model 82 $ SFP-1/2BK Stop Filler Plate 1/2" x 1-1/4" x 8" Black $15.00 SFP-1/2CL Stop Filler Plate 1/2" x 1-1/4" x 8" Clear $15.00 SFP-1/4BK Stop Filler Plate 1/4" x 1-1/4" x 8" Black $15.00 SFP-1/4CL Stop Filler Plate 1/4" x 1-1/4" x 8" Clear $15.00 SFP-3/8BK Stop Filler Plate 3/8" x 1-1/4" x 8" Black $15.00 SFP-3/8CL Stop Filler Plate 3/8" x 1-1/4" x 8" Clear $15.00 SFP-5/8BK Stop Filler Plate 5/8" x 1-1/4" x 8" Black $15.00 SFP-5/8CL Stop Filler Plate 5/8" x 1-1/4" x 8" Clear $15.00 SFP82-1/2BK Stop Filler Plate 1/2" x 1-1/4" x 12" Black $18.00 SFP82-1/2CL Stop Filler Plate 1/2" x 1-1/4" x 12" Clear $18.00 SFP82-1/4BK Stop Filler Plate 1/4" x 1-1/4" x 12" Black $18.00 SFP82-1/4CL Stop Filler Plate 1/4" x 1-1/4" x 12" Clear $18.00 SFP82-3/8BK Stop Filler Plate 3/8" x 1-1/4" x 12" Black $18.00 SFP82-3/8CL Stop Filler Plate 3/8" x 1-1/4" x 12" Clear $18.00 SFP82-5/8BK Stop Filler Plate 5/8" x 1-1/4" x 12" Black $18.00 SFP82-5/8CL Stop Filler Plate 5/8" x 1-1/4" x 12" Clear $18.00 AKG Adhesive Kit For Glass Hdwr. $ GDB Glass Door Bracket $50.00 HEB-3G Header Ext. Braket 3" x 3" x 8" Glass Door $60.00 ASB-32BK Alum. Spacer Bracket Model 32 Black $25.00 ASB-32CL Alum. Spacer Bracket Model 32 Clear $25.00 ASB-62BK Alum. Spacer Bracket Model 62 Black $25.00 ASB-62CL Alum. Spacer Bracket Model 62 Clear $25.00 ASB-82BK Alum. Spacer Bracket Model 82 Black $40.00 ASB-82CL Alum. Spacer Bracket Model 82 Clear $40.00 CWB-32BK Concrete/Wood Bracket Model 32 Black 1/2" $45.00 CWB-32CL Concrete/Wood Bracket Model 32 Clear 1/2" $45.00 CWB-62BK Concrete/Wood Bracket Model 62 Black 1/2" $45.00 CWB-62CL Concrete/Wood Bracket Model 62 Clear 1/2" $45.00 CWB-82BK Concrete/Wood Bracket Model 82 Black 1/2" $48.00 CWB-82CL Concrete/Wood Bracket Model 82 Clear 1/2" $48.00 DC-32BK Dress Cover Black Anodized Model 32 $22.00 MAGNALOCKS Part Number Description Price DC-32BP Dress Cover Brass Polished Model 32 $80.00 DC-32CL Dress Cover Clear Anodized Model 32 $22.00 DC-32SP Dress Cover Stainless Polished Model 32 $80.00 DC-62BK Dress Cover Black Anodized Model 62 $22.00 DC-62BP Dress Cover Brass Polished Model 62 $80.00 DC-62CL Dress Cover Clear Anodized Model 62 $22.00 DC-62SP Dress Cover Stainless Polished Model 62 $80.00 DC-82BK Dress Cover Black Anodized Model 82 $30.00 DC-82BP Dress Cover Brass Polished Model 82 $80.00 DC-82CL Dress Cover Clear Anodized Model 82 $30.00 DC-82SP Dress Cover Stainless Polished Model 82 $80.00 DDC-32BK Dbl. Dress Cover Black Anodized Model 32 $44.00 DDC-32CL Dbl. Dress Cover Clear Anodized Model 32 $44.00 DDC-62BK Dbl. Dress Cover Black Anodized Model 62 $44.00 DDC-62CL Dbl. Dress Cover Clear Anodized Model 62 $44.00 DDC-82BK Dbl. Dress Cover Black Anodized Model 82 $60.00 DDC-82CL Dbl. Dress Cover Clear Anodized Model 82 $60.00 HEB-3BK Header Ext. Bracket 3" x 3" x 8" Black $45.00 HEB-3CL Header Ext. Bracket 3" x 3" x 8" Clear $45.00 HEB82-3BK Header Ext. Bracket 3" x 3" x 12" Black $48.00 HEB82-3CL Header Ext. Bracket 3" x 3" x 12" Clear $48.00 UHB-82BK Univ. Header Bracket Black Anodized Model 82 $48.00 UHB-82CL Univ. Header Bracket Clear Anodized Model 82 $48.00 UHB-BK Univ. Header Bracket Black Anodized 1"x1-1/2" x 10" $44.00 UHB-CL Univ. Header Bracket Cl. Anodized 1"x1-1/2" x 10" $44.00 UMB-34CL Univ. Bracket Model 34 Clear $30.00 Z-32BK Z-Bracket Black Anodized Model 32 $84.00 Z-32CL Z-Bracket Clear Anodized Model 32 $84.00 Z-32SS Z-Bracket Stainless Steel Model 32 $84.00 Z-34CL Z-Bracket Clear Anodized Model 34 $84.00 Z-34SS Z-Bracket Stainless Steel Model 34 $84.00 Z-34BK Z-Bracket Black Anodized Model 34 $84.00 Z-62BK Z-Bracket Black Anodized Model 62 $84.00 Z-62CL Z-Bracket Clear Anodized Model 62 $84.00 Z-62SS Z-Bracket Stainless Steel Model 62 $84.00 Z-82BK Z-Bracket Black Anodized Model 82 $90.00 Z-82CL Z-Bracket Clear Anodized Model 82 $90.00 Z-82SS Z-Bracket Stainless Steel Model 82 $90.00 ISO 9001 World Quality Standard A

10 10 SHEAR ALIGNING MAGNALOCK MAGLOCK ( ) SAM THE SHEAR ALIGNING MAGNALOCK A Concealed, Bi-Directional Shear Lock More State of the Art Smart! Door Control 10 OVERVIEW Securitron s revolutionary Shear Aligning Magnalock (SAM) permits concealed mounting in aluminum, wood and steel doors for the ultimate in finished appearance. Both the magnet and the strike plate assembly take up only 1-1/2" (38 mm) width in the door and the door frame which permits use on nearly all commercial doors. The SAM also maintains swing through operation on double acting doors and may even be employed on motorized bi-parting doors with a breakaway escape feature. The SAM holds a robust 1,000 pounds (455 Kg.) and yet draws only four watts of power while operating on 12 or 24 volts DC (dual voltage). The SAM self-aligns into correct locking position as the door closes and therefore requires no door position sensing or auxiliary timing circuitry. Its patented physical design (patent pending) eliminates any risk of partial locking and releases instantly without binding. Senstat lock status sensing, with SPDT output is available as an option. SELF-ALIGNING OPERATION The SAM locks by seating two conical buttons located on opposite corners of the strike plate into matching holes on each end of the magnet body. The height and shape of these buttons prevent the unit from engaging early as the door closes. Once the door is closed, the buttons automatically drop into their matching holes to provide security while maintaining unaltered appearance of the door and frame. When power is cut, the angled buttons ramp out of their holes for immediate and total release of the door. The hole diameters are oversized which forgives imprecise door alignment and accepts minor variations in installation position. A unique benefit of the SAM s physical design is that it can function if the door swings to close or slides to close: it operates bi-directionally. The SAM may also be mounted at the top, side or bottom of the door without the need to purchase additional bracketry or a different model. UNIVERSAL MOUNTING IN EVERY DOOR The SAM ships with a full array of mounting brackets which permit installation in hollow steel, wood and aluminum doors which either finish flush or have recesses of 5/8 (11.7mm) to 1-15/16 (3.33 mm). There s nothing else to buy. Installation requires preparing a rectangular cut-out and drilling holes for retrofit doors which have not been prepared in advance. The same universal model may be mounted on the top, side or bottom of the door. For specialty applications, the optional surface mount kit (part #SMLS for SAM magnet, or #SMSS for SAM strike) permits magnet, strike, or both to be surface mounted when mortising isn t possible.

11 An ASSA ABLOY Group company SAM Surface Mount Kit SHEAR ALIGNING MAGNALOCK TECHNICAL DATA Holding Force:1000 lbs. (455 Kg.) SAM and SAMSC. Power Required: 350 ma at 12 VDC or 175 ma at 24VDC. Dimensions: 9-1/2 length x 1-1/2 width x 1-1/8 depth (241.3 x 38.1 x 28.6 mm) Strike Dimensions: 8-3/4 length x 1-7/16 width x 1/2 thickness (222.3 x 36.5 x 12.7 mm) Strike Sub-Mounting: 9-5/8 length x 1-7/16 width x 1-1/8 depth (244.5 x 36.5 x 28.6 mm) "SC" Senstat Output: SPDT, 1 Amp. Operating Temperatures: -40 to 140 F, -40 to 60 C. Contact factory for complete architectural specification and templates. Patents: U.S. Patent #6,135,515. Other U.S. and Foreign Patents Pending Listings: UL R13976 and BP UNMATCHED ELECTRONIC PERFORMANCE The SAM features autoswitching dual voltage operation. You apply either 12 VDC or 24 VDC to the power input wires and the unit configures itself to draw the correct amount of current. You ll never find yourself with the wrong voltage model and you can change system voltage after installation. The low power consumption of four watts prevents the concern of heat build-up and keeps power supply cost low while permitting long wire runs. The SAM includes internal electronic noise suppression which makes it compatible with all brands of access control equipment and optionally, you can include Senstat lock status sensing which provides an SPDT dry contact output when the lock is secure. This provides better reporting to your alarm or access system than traditional door position sensing which says nothing about whether the lock is secure. ORDERING INFORMATION Standard SAM or SAMSC with lock status sensing. Part Number Description Price SAM Shear Aligning Mag Dual Voltage $ SAM SC Shear Aligning Mag Dual Voltage Form-C Senstat $ SMLS Housing Surface Mount Lock / Shear $ SMSS Housing Surface Mount Strike / Shear $ ABOVE: INSTALLED VIEW OF STRIKE IN TOP DOOR EDGE BELOW: INSTALLED VIEW OF MAGNET IN FRAME ISO 9001 World Quality Standard A

12 12 UNLATCH UNLATCH MAGLOCK ( ) ELECTRONIC STRIKE A Revolutionary Breakthrough In Access Control Technology 12 OVERVIEW Securitron s patented UnLatch is a completely new type of electric door releasing device which sweeps away the limitations inherent in traditional electric strike designs. The UnLatch screws into the existing door frame in seconds. There is no need for routing a special cut-out. This not only saves on installation labor, but maintains the original strength and integrity of the door frame and yields a fully concealed installation for maximum esthetic appeal. The UnLatch is highly universal in that one version will operate any North American cylindrical type dead latch or spring latch and installs in wood, steel or aluminum door frames. Unlike conventional electric strikes, the UnLatch also releases under pressure and includes a latch status monitoring output as a standard feature. The UnLatch truly merits being called revolutionary. HOW IT WORKS Basic operation of the UnLatch is the same as electric strikes. An access device (such as a card reader or digital keypad) activates the UnLatch for controlled entry. Egress is accomplished by simply turning the lock set lever or knob from the inside. Conventional electric strikes include a plate called the keeper or gate which is electrically released to swing out and thereby allows the latch to move through the space the keeper has vacated. This keeper movement is the reason why a special cut needs to be made in the door frame. The cutout provides a space for the keeper to swing in to. The UnLatch however uses a motor driven plunger to push the latch back in to the door. There is no keeper and no reason to route out the door frame. For dead latches, a second plunger separately controls the dead latch pin which is normally maintained in the retracted state for optimum security. The dead latch plunger then releases the dead latch pin just before the first plunger pushes in the spring latch to release the door. When the door is reclosed, the UnLatch automatically re-secures it including reestablishing full dead latch security. The UnLatch s unique and novel operation yields an unprecedented array of benefits:

13 An ASSA ABLOY Group company NEAR UNIVERSAL APPLICATION A single UnLatch model will operate any North American cylindrical type spring latch or dead latch (the most common latch type). There is no need to determine the specific brand of latching hardware, the UnLatch accepts all of them. Similarly, the same UnLatch model can be installed on all door types: steel, aluminum or wood. Problems of ending up with the wrong electric strike model for the door or latch type are virtually eliminated. With the Model UFP, UnLatch Filler Plate, the UnLatch may generally be used to replace a previously installed conventional electric strike. MECHANICAL INSTALLATION IN SECONDS Nearly all North American commercial door frames employ an ANSI 4-7/8 strike plate. The UnLatch is constructed around this standard plate, so mechanical installation generally consists of unscrewing the existing strike, and screwing the UnLatch into its place! Conventional electric strikes require a side cut into the door frame to accommodate the keeper. This not only requires considerable skilled labor time but weakens the door frame and degrades its appearance. The UnLatch can also be installed on frames with residential type ANSI 2-3/4 strikes. While this requires more work, it remains mechanically much simpler than the installation of a conventional electric strike, particularly on wood doors which are handled by simple chiseling. FULLY CONCEALED APPEARANCE The prominent door frame side cut in a conventional electric strike installation not only degrades the appearance of the door and frame, but it s immediately obvious to an intruder that the door is secured with an electric strike. In contrast, an UnLatch installation is physically indistinguishable from a standard mechanical lock set. This allows putting the door under electronic control without altering the architectural presentation in any way. This unprecedented benefit of the UnLatch also enhances security as intruders can t determine how the door is secured. FULL DEADLATCH SUPPORT Conventional electric strikes work poorly and inconsistently with dead latches. Locksmiths will often remove the dead latching function from door hardware so as to avoid operational problems with the electric strike. This seriously degrades security as the latch can be released from the outside through use of a flexible card for instance. In contrast, the UnLatch makes precise and active use of the dead latch pin and therefore maintains the dead latch function at all times. The security level in an UnLatch installation is therefore the highest of which the door hardware is capable. Adding electronic control to a door shouldn't reduce security and with the UnLatch, it doesn't. OPENS UNDER PRESSURE; PERFORMS UNDER PRESSURE The UnLatch reliably releases the door even when the person entering is already pulling on it. Standard electric strikes can t do this and it makes their use more awkward compared to the UnLatch, as the UNLATCH person entering has to "try" the door multiple times. Another powerful advantage of the UnLatch is its resistance to abuse. Conventional electric strikes need frequent replacement in abusive door environments as the pivoting keeper receives the abuse and fails, but the rugged design and construction of the UnLatch makes it highly resistant to abusecaused failure as the door latch, when rattled, impacts a solid element within the UnLatch. You can expect many years of trouble free operation when you select the UnLatch. LATCH STATUS AS A STANDARD Using an internal sensor, the UnLatch knows when the door latch is in the secure condition (the latch is seated within the UnLatch). This vital security information is reported out on SPDT dry contacts (three wire output). These contacts can be wired to the local alarm or access control system to significantly enhance building security. Any time a door fails to close and resecure, the alarm/access system is aware of it and a guard can be dispatched to check the door and correct the problem. The UnLatch becomes a key player in the building's physical security system as it catches propped doors, "sticking" doors, worn out door closers and improper behavior by individuals within the building. There are no loose ends in an UnLatch installation. TECHNICAL INNOVATION REVEALED: 1 AT CYCLE POSITION ONE, THE DOOR IS OPEN AND THE UNLATCH IS READY TO ACCEPT THE LATCH AND DEAD LATCH PIN. 2 AT POSITION TWO, THE DOOR HAS CLOSED AND A FULLY EXTENDED LATCH IS CAPTURED WHILE THE DEAD LATCH PIN IS HELD BY ITS CORRESPONDING PLUNGER. THE DOOR IS NOW SECURE. 3 THE MOTOR ACTIVATES, RELEASING THE DEAD LATCH PIN AND BOTH PLUNGERS SIMULTANEOUSLY PUSH FORWARD IN ONE-THIRD OF A SECOND, RELEASING THE DOOR. FINALLY, THE UNLATCH S ELECTRONIC BRAIN BRINGS THE UNIT BACK TO POSITION ONE, READY TO SECURE THE DOOR AGAIN. 13

14 14 UNLATCH Installation of an old-fashioned electric strike requires the tools and expertise to alter a door jamb. And even when properly done, the results are permanently unappealing and obtrusive MAGLOCK ( ) TECHNICAL DATA Size: Standard ANSI 4 7/8" Strike. Dimensions: 3-3/8" Long, 1-3/8" Wide, 1-7/16" Deep Voltage: 12 & 24 VDC +20% -10%. Full wave rectified DC acceptable. 86 x 35 x 36.5mm Current Draw: (@ 12VDC) 40mA continuous, minimum 300mA when motor is operating. (@ 24VDC) 40mA continuous, minimum 200mA when motor is operating. Higher capacity supply (1-3 Amps) is recommended for start-up inrush to achieve best operation under pre-load. Electric Motor: No Solenoids. Operating Temperature Range: -20 o F to 125 o Listings: UL R18923 and BP7041 Stainless Steel Face with Metal Enclosure....But the UnLatch requires absolutely no jamb alteration! It installs easily in seconds and provides a totally undetectable appearance that s truly State of the Art Smart! THE UNLATCH FITS ANY STANDARD ANSI 4 7/8" CUTOUT 1 3/8" Supplied with 10 ft. Cable. Mounting Fasteners Included. U.S. Patents #5,474,342 and #6,022,056 with other U.S. and international patents pending.s ORDERING INFORMATION UNL-12 for 12 VDC operation. UNL-24 for 24 VDC operation. Part Number Description Price UNL-12 UnLatch For Cylindrical Locks 12VDC $ UNL-24 UnLatch For Cylindrical Locks 24VDC $ UFP UnLatch Filler Plate Electric Strike Retrofit $ With Famous 3 3/8" MAGLOCK Support! OPERATES EVEN WHEN PRE-LOADED FEATURES FORM C LATCH STATUS MONITOR MAGNACARE TM WARRANTY. 1 7/16" UNLATCH OPERATES CYLINDRICAL and TUBULAR LATCHES WITH OR WITHOUT A DEADLATCH PIN! 14 STATE OF THE ART SMART! ISO 9001 World Quality Standard A5066

15 An ASSA ABLOY Group company TOUCH SENSE EXIT DEVICES 15 TOUCH SENSE EXIT DEVICES Unique Touch Sensitive Exit Devices For Use With Magnetic Locks TSB-3CL Clear Finish TSB-3BK Black Finish TSH-CL Clear Finish TSH-BK Satin Black Finish OVERVIEW On magnetically locked, non fire-rated doors, most building codes require an exit device that does not require any special tools or knowledge. Securitron s patented Touch Sense Bar is the perfect device for this requirement. The simple act of touching the bar (even through gloves or clothing) trips an electronic sensor which immediately releases the lock. The Touch Sense Bar is the ultimate in egress reliability and safety. Having no moving parts, it does not suffer mechanical wear and no pressure is required for use which provides superior egress safety for frail or disabled persons. The model TSH, Touch Sense Handle is intended for use on inswinging doors or aluminum frame glass doors when a less obtrusive appearance is desired. EASY INSTALLATION ON ANY DOOR The TSB-3 and TSH come complete with fastener sets allowing quick and strong installation on metal, aluminum-frame glass or wood doors of all types. A stainless steel door cord is supplied with both products to route wiring (I6 ft. cable supplied) off to the door frame. The Touch Sense Bar is offered in three standard door opening widths (36", 42" and 48"). For a non-standard opening width, the TSB-3 can be easily cut down in the field. The Model TCP accessory bracket aids the retrofit installation of the Touch Bar on aluminum doors by covering up mounting holes used by a Jackson or Dor-o-Matic mechanical bar which may have been previously mounted. The Touch Sense Handle is sized to cover up existing mounting holes used for standard pulls on aluminum doors. It is employed to pull open inswinging doors or as an alternate push-open device for outswinging doors which provides a different look on aluminum frame glass doors. The Touch Sense Handle includes two legend plaques which state PULL or PUSH or which may be reversed to show a black or Typical installation on aluminum frame glass door with Model 62 Magnalock, DK-26SS Digital Entry and TSB-3CL Touch Sense Bar. 15

16 16 TOUCH SENSE EXIT DEVICES TSB/TSH SERIES Meets "No Tools or Knowledge" Code Requirements INTEGRATION WITH ACCESS CONTROL Many applications call for controlled entry from the outside of the door and free egress from the inside. Use of the Touch Bar or Touch Handle as the egress device makes this simple, safe and reliable. The units each have a double pole relay output. The NC contacts are wired to directly break power to the magnetic lock when the unit is touched. The NO contacts connect to the REX (request to exit) terminals in the access system controller so that no alarm event is created during free egress. Extra safety is achieved because in the event of a failure in the access control system, the Touch Bar or Touch Handle will still directly release the lock. This double break approach is increasingly being mandated in U.S. building codes. REDUNDANT OPERATION Model TSH-BK mounted on an inswinging aluminum frame glass door. While the Touch Bar and Handle feature no-moving-parts electronic reliability, they go beyond by providing a second independent release circuit. A push button provides backup lock release function in the event of any sensor failure. This fits into the modern safety engineering concept of eliminating the possibility of functional failure if any single device fails. It s another example of the careful thought and concern for user safety that has gone into Securitron s design. Both the TSB-3 and TSH include a backup release circuit., via a push button and reference label MAGLOCK ( ) TECHNICAL DATA Power: volt AC or DC Current Drawn: 5mA at rest, 25mA active Contacts: DPST (NC & NO)1 Amp at 24 volts Wire: 6 conductor, 22 gauge, 16 ft. provided Finishes: Clear anodized (US 628), Black anodized (US 335) Patent: U.S Patent #4,871,204. Listings: TSBs are UL Listed as a part of Securitron s locking systems for exit doors. SA6635 & BP7041, US and Canada. They are UL Recognized for use with any electromagnetic lock. ORDERING INFORMATION TSB SERIES TSB-3CL (36-inch door opening, clear finish) TSB-3BK (36-inch door opening, black finish) Add 42 for 42-inch openings or '48' for 48- inch door openings The TSB-3 series may be easily field cut to accommodate varied door openings. TCP-CL or BK (clear or black retrofit accessory bracket pair to cover up mechanical bar mounting holes) TSH SERIES TSH-CL (clear finish) TSH-BK (black finish) Part Number Description Price TSB-3CL Touch Sense Bar Clear Anodized 36in. $ TSB-3BK Touch Sense Bar Black Anodized 36in. $ TSB-3CL-42 Touch Sense Bar Clear Anodized 42in. $ TSB-3BK-42 Touch Sense Bar Black Anodized 42in. $ TSB-3CL-48 Touch Sense Bar Clear Anodized 48in. $ TSB-3BK-48 Touch Sense Bar Black Anodized 48in. $ TSH-BK Touch Sense Handle Push-Pull Satin Black Alum. $ TSH-CL Touch Sense Handle Push-Pull Clear Alum. $ CAB-6 16ft 6 Conductor Cable With Connector $50.00 TCP-CL Cover Plates For Touch Bar Mounting Set Of 2 Clear $40.00 TCP-BK Cover Plates For Touch Bar Mounting Set Of 2 Satin Black $40.00 TSB-C Door Cord w/gray & Black Caps 18" Cord $ IT TRULY IS AMAZING. TOUCH SENSE TECHNOLOGY ISO 9001 World Quality Standard A5066

17 An ASSA ABLOY Group company EXIT CONTROL/PUSH BUTTONS 17 EXIT CONTROL A Variety Of Illuminated Exit Buttons To Deactivate Any Electric Lock PB2EH PB2E-F PB2E PB3E EEB3N PB3N PB4N PB3EN PB3ER PB2H PB EEB2 PB5 PB3 PB2 PB4 OVERVIEW Securitron manufacturers a wide variety of exit pushbuttons for security applications. All units are mechanical except for the unique SP-1 which employs touch sensing technology. The series features mounting on brushed stainless steel plates and includes an exit prompt instruction for each model. Hookup is from colored flying leads or labeled screw terminals. These exit buttons are attractive, rugged, reliable and suitable for installation anywhere. The most common application is momentary or timed release of an electric lock. This may be accomplished by direct hookup or by signaling the Request to Exit (REX) input of an access control system. Note that depending on the door and locality, it may require the use of an exit device that will release the lock with one motion, such as Securitron s Touch Sense Bar. Check with the local building or fire department. Model SP-1 Model SP-1 (Exploded View) PB PB2 PB3 PB4 PB5 MODEL SP-1 The remarkable SP-1 uses patented Securitron touch sensing technology to create a push panel with no moving parts. It operates with a simple touch even through gloves. Use is quick and convenient and there is nothing to wear out or break off. In the field of push controls, the SP-1 is the ultimate product. The SP-1 includes an internal timer so that a brief touch will operate the unit for up to 25 seconds. It features 1 Amp DPST contacts and has a mechanical redundant backup switch for extra reliability. The unit is delivered complete with a brushed stainless steel face plate, surface mount plastic backbox and 16 ft. cable. Surface mounting is necessary for touch sensing as the plate must be isolated from the wall. The unit is oversized so that it can be mounted over a single gang cutout and mounting hole positions allow use of the standard female holes in a single gang cut-out. A three part vinyl decal is included to provide the appropriate prompt to the user and a red LED is incorporated in the backbox which illuminates when the unit is touched. For ADA compliant systems, an optional decal with symbol is available (SP-1LH). Single Gang Narrow Style Surface Mounted SPDT Contacts DPST Contacts DPDT Contacts Contact Rating Momentary Alternate Non-Illum. Version Outdoor Use Yes No No No Yes No 7 Amps Yes Optional Add A No Yes Yes No No Yes No No 10 Amps Yes No Optional Add E No Yes Optional Add N Optional Add ER (non-illum.) No Yes Field Modify 3 Amps Yes Optional Add A Optional Add E No Yes Optional Add N No Yes No Optional Add 2 4 Amps Yes Optional Add A No No Yes No No No No Yes 10 Amps Yes No Optional Add E No 17

18 18 18 EXIT CONTROL/PUSH BUTTONS MODEL PB Model PB Back View Model PB "Top of the Line" The model PB features an industrial grade 1-1/ 2 mushroom button with 7 Amp DPST (NO/NC) contacts. It is waterproof (NEMA4) and includes VDC bi-color illumination. The button itself illuminates green from a multi-chip LED and there is also a super-bright red LED. Momentary or alternate (Model PBA) contacts may be chosen and the switch is UL Listed. The model PB is available on single gang plates only and is delivered with an indoor backbox. MODEL PB3 Smallest Size and the Most Options The PB3 is a compact (1 x 1-3/4 ) push button which is also short in length so it can be supplied on a narrow stile plate (Model PB3N) and installed directly on aluminum glass door narrow stile frames. The PB3 switch has 3 Amp, DPST, UL listed contacts and it can be converted to DPDT in the field. A backbox is supplied on single gang versions and VDC bi-color illumination is standard. An alternate action version (Model PB3A) is available, as well as a non-illuminated version (Model PB3E). A surface mount version is available (PB3ER), which is perfect for mounting under a desk. MODEL PB2 Large and Tough The model PB2 features a large (2 Diagonal) flush button, which is illuminated by a 25,000 hr. 12/24 VDC incandescent bulb. It includes a super-bright red LED and is available with momentary operation on a single gang plate only. It has SPDT 10 Amp contacts and is delivered with a backbox. More economical is the PB2E, which is a non-illuminated version (backbox not furnished). For ADA compliant systems, a version with symbol is Model PB2 Back View Model PB2H Model PB2 Model PB5 available (PB2H and PB2EH). A final choice is the PB5 and PB5E (non illuminated version). This unit features a 2" round button operator in red which is required in some areas. The PB5 series also has a double pole contacts. MODEL EEB2 Timer Integration Model PB3 Back View Securitron integrates a 30 second timer function into two existing button designs. Model PB2E becomes the model EEB2 for single gang applications, and the model PB3E becomes the model EEB3N for narrow stile mounting. The resultant package integrates with a motion detector like Securitron's model XMS to provide code legal exit on Access Controlled Egress Doors. Model EEB3N Model PB3 Model PB3N Model EEB MAGLOCK ( ) MODEL PB4 Best Damage Resistance The PB4 incorporates an allsteel button, which has been specifically designed to resist severe attacks such as hammer blows. SPDT contacts are rated at Model PB4 Back View Model PB4 Model PB4N 4 Amps and a bi-color (red/green) LED is standard. Momentary or alternate (Model PB4A) contacts may be selected and the unit is available on a single gang narrow stile (Model PB4N) stainless steel plate. The single gang version is delivered complete with an indoor backbox and finally, DPDT contacts may be specified (Model PB4-2). ORDERING INFORMATION Part Number Description Price EEB2 Emerency Exit Button Single Gang With 30 Second Timer $ EEB3N Emergency Exit Button Narrow Stile With 30 Second Timer $ PB Push Button 1-1/2 Round Momentary Single Gang $ PBA Push Button 1-1/2 Round Alternate Single Gang $ PB2 Push Button 2" Square Momentary SPDT Single Gang $90.00 PB2H Push Button 2" Square Momentary With Handicap $90.00 PB2E Push Button 2" Square Momentary Economy Single Gang $60.00 PB2EH Push Button 2" Square Momentary Economy w/handicap $60.00 PB3 Push Button 3/4" Rectangle Momentary Single Gang $90.00 PB3A Push Button 3/4" Rectangle Alternate Single Gang $90.00 PB3AN Push Button 3/4" Rectangle Alternate Narrow Stile $90.00 PB3E Push Button 3/4" Rectangle Momentary Economy Single Gang $70.00 PB3EA Push Button 3/4" Rectangle Alternate Economy Single Gang $70.00 PB3EAN Push Button 3/4" Rectangle Alternate Economy Narrow Stile $70.00 PB3EAR Push Button Remote Alternate Economy Surface Mount $60.00 PB3EN Push Button 3/4" Rectangle Momentary Economy Narrow Stile $70.00 PB3ER Push Button Remote Momentary Economy Surface Mount $60.00 PB3N Push Button 3/4" Rectangle Mom Narrow Stile $90.00 PB4 Push Button 1" Stainless Steel Momentary Single Gang $ PB4-2 Push Button 1" Stainless Steel Momentary DPDT Single Gang $ PB4A-2 Push Button 1" Stainless Steel Alternate DPDT Single Gang $ PB4AN-2 Push Button 1" Stainless Steel AlternateDPDT Narrow Stile $ PB4N Push Button 1" Stainless Steel Momentary Narrow Stile $ PB4N-2 Push Button 1" Stainless Steel Momentary DPDT NarrowStile $ PB5 Push Button 2" Diameter Red Momentary DPDT-S/G With Light $ PB5E Push Button 2" Round Red Momentary DPDT-S/G Without Lights $80.00 SP-1 Touch Sensor Plate $ SP-1L Sensor Plate Label $6.00 SP-1LH Label Touch Plate Handicap Decal Blue Vinyl $6.00

19 An ASSA ABLOY Group company MOTION DETECTOR EXIT PACKAGE MOTION DETECTOR EXIT PKG. Passive Infrared Request-To-Exit Functionality For Magnetic Locks 19 XMS MOTION DETECTOR EEB3N EEB2 OVERVIEW Securitron s XM1 and XM1N are complete, UL listed, dual voltage integrated electronic egress packages designed to operate on a magnetically secured door while fully complying with US building codes (BNBC, SBC, UBC, NFPA) under the rules for Access Controlled Egress Doors. The XM-1 consists of Securitron s model XMS egress motion detector and the EEB2 integrated push button/timer. The EEB2 mounts in a single gang cut-out. The XM1N also includes the XMS motion detector but substitutes the EEB3N integrated push button/timer which mounts directly on a 1 3/4 narrow stile door frame. OPERATION The door is secured with a magnetic lock such as Securitron s Magnalock series or SAM shear lock. Typically, controlled entry from the outside is made possible via a device such as a card reader or digital entry keypad such as Securitron s DK-26. However, when the door in question is part of the building egress path, safe and approved free exit must be provided for individuals without requiring special tools or knowledge. With the XM1 package, the primary means of egress is the XMS egress motion detector. A person approaching the door is seen by the detector just before he reaches the door. The XMS automatically cuts power to the magnetic lock, allowing the individual to freely exit without even realizing that the door is secured! For additional safety (as required by codes) in case of any possible malfunction with the detector, an integrated push button timer is mounted next to the door. Momentarily pressing the button will release the door from a different circuit for 30 seconds (allowing individuals following to use the door as well). The EEB2 or EEB3N units are retriggerable. Each time the button is pressed, the door stays released for 30 seconds regardless of where it was in the release cycle at the time the button was pressed. THE XMS: DESIGNED FOR THE PURPOSE The XMS is unique among curtain type motion detectors because it has been specifically configured to reliably release magnetic locks as opposed to detecting an intrusion. A number of XMS product features deliver this benefit. Operation is fail safe. Should the detector lose power, the lock will automatically release. 19

20 20 MOTION DETECTOR EXIT PKG MAGLOCK ( ) Lock control switching is done by a heavy duty field effect transistor rather than by lower capacity relay contacts. The lock released state is maintained for a trailing four seconds after detection. This avoids the risk of relocking if the individual intending to exit pauses for a moment. A REX signaling relay is included which can be connected to the access control system to annunciate that someone is exiting and therefore suppress an alarm event. The detection pattern can be precisely adjusted to suit the door environment so that detection of persons going past the door can be avoided and security against unauthorized entry can be optimized. The unit will operate on any DC voltage between 12 and 28 v. ORDERING INFORMATION For maximum convenience, the XM-1 and XM-1N may be ordered as packages or the XMS, EEB2 and EEB3N system components may be ordered separately for integration with other components. Part Number Description Price XM1 Exit Delay Package with XMS and EEB2 Timer $ XM1N Exit Delay Package with XMS and EEB3N Timer $ EEB2 Emergency Exit Button Single Gang With 30 Second Timer $ EEB3N Emergency Exit Button Narrow Stile With 30 Second Timer $ XMS Exit Motion Sensor $ I N FR A R E D X MS E X IT M OT I O N D ET THE XMS PACKAGE INTEGRATES EASILY WITH OTHER COMPONENTS, BUT FOR A COMPLETE SYSTEM, ORDER IT WITH AN AWARD-WINNING BPS POWER SUPPLY AND MAGNALOCK! E CT PUSH BUTTON / TIMERS: RUGGED AND INTEGRATED The two push button/timers respectively configured for single gang (EEB2) or narrow stile (EE3BN) mounting, are fully integrated so that you need only connect a power source (12 or 24 VDC) and the magnetic lock to color coded wires. The retriggerable, 30 second code mandated timing function is automatically activated as is double break control of the magnetic lock for additional safety. Double break control means that when the button is pressed, the button itself immediately and directly cuts power to the magnetic lock while at the same time an internal timer controlled relay also cuts power to the magnetic lock at a second point in the circuit. Therefore, should the timed contacts fail for example, the button itself will still release the door. Finally, the button surfaces are legended according to US code requirements to prompt persons as to the proper use of the door. TECHNICAL DATA Input voltage: 12 or 24 VDC. Power draw: ma, depending on switching status. Environment: Indoor use only. 20 O R MADE FOR THE MAGNALOCK. ISO 9001 World Quality Standard A5066

21 An ASSA ABLOY Group company KEYSWITCHES A Full Range of Keyswitches for Electronic Security Control KEYSWITCHES 21 OVERVIEW Securitron s family of keyswitches delivers broad control capabilities for diverse applications in electronic security. Keyswitches provide an inexpensive and compatible method for authorized personnel to control or signal from various locations within the facility. Numerous door control functions can be achieved such as momentary, alternate or timed authorized use. Alarm points may be shunted and devices such as CCTV cameras may be taken in and out of operation. The broad extent of Securitron s keyswitch line will allow you to find the right product for any requirement. MORTISE KEYSWITCH (MK SERIES) For State of the Art Smart Door Control! One of the most important criteria in selecting a keyswitch is compatibility with the keying system used on mechanical cylinders throughout the facility. The MK series is normally delivered without cylinder but will accept any U.S. brand 1-1/4 or 1-1/8 mortise cylinder with any cam. The cylinder is simply screwed into the MK on site and may be keyed as necessary. The MK also offers an impressive choice of configurations which furnish unmatched power and flexibility. The basic unit is delivered on a brushed stainless steel single gang or narrow stile face plate. Both standard and tamper screws are furnished. It includes a spring-loaded momentary or push on/push off alternate 5 Amp SPDT switch (DPDT Optional). A red/green bicolor LED which operations on 12 or 24 VDC is also standard. The LED may be connected as desired to prompt the operator. A cylinder (model MKC) can be supplied as an option. DUAL SWITCH CAPABILITY With the standard unit, the switch is activated by turning the key in one direction and then turning it back for removal. The MK series, however, includes the capability of adding a second switch which actives when the key is turned in the opposite direction. You can achieve dual momentary, dual alternate or a momentary-alternate keyswitch. This permits many powerful applications. For instance, the same keyswitch could momentarily release a door for authorized use and activate an alarm point for the night. The switches are individually mounted so the unit can be easily changed or upgraded in the field. The all-steel construction of the switch elements means that long operating life is gained along with the MK s outstanding flexibility. MODEL KP1 SERIES Simplicity and Low Cost For less demanding applications, the KP1 series includes an integrated cylinder/switch with 7 Amp SPDT contacts in momentary and alternate configurations. As with the MK, mounting on single gang or narrow stile plate is available and all units include the bicolor, dual voltage LED. Multi-unit orders are delivered keyed alike and a backbox is included with the single gang versions. The cylinders may be re-keyed in the field by a locksmith. 21

22 22 KEYSWITCHES MAGLOCK ( ) THE TM9 power of your keyswitch control at will. CUSTOM KEYSWITCH CONTROLS TIMER INTEGRATION It s common in keyswitch applications to require a timed relay output to follow a momentary key turn. To achieve this, Securitron offers the model TM-9 TimeMate miniature timer. Designed to be a keyswitch accessory, the TimeMate provides 2-36 second dipswitch set timing with a 3 Amp SPDT output. The TimeMate operates on 12 VDC and 24 VDC/VAC and is housed in a plastic enclosure small enough to be mounted in the backbox with the keyswitch. The TimeMate allows you to extend the For volume individual applications, Securitron is able to provide keyswitches and other devices on larger face plates to suit a particular custom requirement. Common examples include the addition of a Sonalert, manual push button, extra indicators, etc. Contact the factory with your specific need. Part Number Description Price MK Mortise Keyswitch Momentary Single Gang $ MKN Mortise Keyswitch Momentary Narrow Stile $ MKA Mortise Keyswitch Alternate Single Gang $ MKAN Mortise Keyswitch Alternate Narrow Stile $ MK2 Mortise Keyswitch Momentary DPDT Single Gang $ MKN2 Mortise Keyswitch Momentary DPDT Narrow Stile $ MKAN2 Mortise Keyswitch Alternate DPDT Narrow Stile $ MKS Additional Switch Momentary For MK Series $30.00 MKSA Additional Switch Alternate For MK Series $30.00 MKS2 Additional Switch Momentary DPDT For MK Series $50.00 MKSA2 Additional Switch Alternate DPDT For MK Series $50.00 MKA2 Mortise Keyswitch Alternate DPDT Single Gang $ MKC Mortise Cylinder 1-1/8 Length 26D Keyway SC $30.00 MKC-KA Mortise Cylinder 1-1/8 Length 26D Keyway SC Keyed Alike $40.00 KP1 Tubular Keyswitch Momentary Single Gang $ KP1N Tubular Keyswitch Momentary Narrow Stile $ KP1A Tubular Keyswitch Alternate Single Gang $ KP1AN Tubular Keyswitch Alternate Narrow Stile $ TECHNICAL DATA MK Series Cylinder: Accepts any U.S. 1-1/8 or 1-1/4 mortise cylinder with any cam. Contacts: SPDT or DPDT 5 Amp switch output, momentary or alternate. Illumination: Bicolor (Red/Green), T 1-3/4 LED operating on 12/24 VDC. KP1 Series Cylinder: Integrated tubular cylinder/switch furnished with 2 keys. Contacts: SPDT 7 Amp switch output, momentary or alternate. Illumination: Bicolor (Red/Green), T 1-3/4 LED operating on 12/24 VDC. ORDERING INFORMATION MK Series MK is momentary SPDT unit furnished on single gang plate with single switch. Add A for alternate switch. Add N for narrow stile plate. Add 2 for DPDT swith. Examples: MKAN; MKN2, MK2, etc. Second switch ordered separately. MKS is momentary SPDT. Add A for alternate. Add 2 for DPDT. Examples: MKSA; MKS2, etc. Optional Cylinder: MKC KP1 Series KP1 is momentary SPDT unit on single plate. Add A for alternate switch. Add N for narrow stile plate. Examples: KP1A, KP1N, KP1AN. ISO 9001 World Quality Standard A5066

23 An ASSA ABLOY Group company DIGITAL ENTRY SYSTEMS 23 DIGITAL ENTRY SYSTEMS A Complete Product Family For Operating Any Electric Lock THE DK-26 IN BLACK OR STAINLESS STEEL FINISH REMOTE CPU IN STURDY STEEL CABINET DK-16 DK-11 STAND ALONE KEYPAD FEATURES ON-BOARD PROCESSING OVERVIEW Securitron digital keypads are all designed for high volume use in controlling entry through electrically locked doors. They are simple to use, with programming being possible from the keypad itself, and yet include powerful features that solve specific application problems. You can select from two keypad types and also have a choice of CPU boards to yield the right combination of cost and features for the requirements of the job. All Securitron digital keypads are products of the same philosophy. They are intended not for arming alarm systems but rather for the much more demanding use of electric lock control indoors and outdoors. Ease of installation is designed in and the instruction manual guides you to the precise level of programming needed for the specific application. Unmatched reliability yields years of operation without service calls. All Digital Entry Systems are easy to install, program and operate with 10 digit key function. 23

24 24 24 DIGITAL ENTRY SYSTEMS DK-26SS KEYPAD SHOWN AT ACTUAL SIZE DK-26: HIGHER SECURITY, NARROW DESIGN AND OUTDOOR USE The DK-26 features a fully waterproof design that can mount directly on a narrow stile door frame. For higher security, the DK-26 is delivered in two parts. The keypad surface mounts via hidden screws and the CPU board mounts with steel enclosure inside the protected area (16 ft. cable furnished). No matter what a vandal may do to the keypad itself (including severing the cable), the door will not open. The keypad is designed for long life under demanding use. It is constructed from cast stainless steel with the switch elements protected under tough EPDM rubber. The DK-26 operates a 5 Amp DPDT relay to switch any type of fail-safe or fail-secure electric lock (or strike). Release time is programmable from 1-99 seconds. A beeper and three LED s provide feedback during operation and programming. Power for the DK-26 is 12 to 24 volts, AC or DC. Typically the same power source is used to operate the lock which makes planning the installation simplicity itself. You can even employ an inexpensive AC transformer to operate a DC lock, as the DK-26 will convert AC to DC and supply it to the lock. ADVANCED MULTIPLE CODE STRUCTURE The DK-26 supports a 5-7 digit Program code which is set initially from a button on the CPU board. Subsequent entry of this code allows programming up to 59 user codes (2-7 digits). With multiple user codes, individuals or groups can be given their own code. When it s necessary to change a code because an individual leaves, the other employees do not have to learn a new code. Codes may be individually deleted and replaced. Finally, a hard code can be set from the CPU board only. The hard code is employed for lower security single code operation or for special uses such as a masterkey management code, a duress MAGLOCK ( ) code or a day/night changeable code. All codes are stored in nonvolatile memory so they are retained in a power failure. FEATURES TO SUIT YOUR NEEDS When you order the DK-26, your only choice is finish: Satin Stainless or Black. Everything else is standard, so there s no need to puzzle out the exact version to suit each application. When you need a particular function, it s already there. You can connect any normally open switch to the CPU board s REX input to trigger the timed relay for either an exit switch or remote release button. You can convert the timed relay to alternate action (toggle mode) so that when the code is entered, the relay energizes and deenergizes only when a valid code is entered a second time. For superior security, the DK-26 incorporates an internal alarm function. When 16 wrong digits are pressed, the beeper sounds for 30 seconds and the keypad is locked out. The DK-26 also includes an SPDT programmable relay whose function is set by inputting a special two digit command. It is factory set as an actual doorbell. (When the Bell key is pressed, it will energize.) Alternate uses include: Sending a duress signal when the Hard code instead of a User code is entered; an alarm signal when 16 wrong digits are pressed; a door prop alarm signal if the door doesn t reclose within a set time; or a nightlight function where the relay operates a lamp (not furnished) when any key is touched. Input terminals allow you to selectively disable the Hard code or all User codes to support different day/night access when an external timer is added. You can purchase a second pad and operate two pads with one CPU board for single-door digital entry and exit. Finally, an optional spy shield helps prevent someone viewing the code being entered. The DK-26 truly does it all and our confidence in the product is backed by Securitron s MAGNACARE Lifetime Warranty. EXPANSION BOARD Do you need an audit trail or more user capacity? Then the DK series expansion board may be the ideal upgrade to your system. The optional expansion board provides another 60 user codes (for a total of 119 user codes plus the programming code and a hard code); serial printer output for a report for a report on who did what and when, an additional programmable relay to increase the versatility of the system, plus an on-board real time clock and calendar. For multiple door installations, the addition of a buffer box allows multiple expansion boards to report to a single printer. Simply add an "XB" to the end of the expansion board part number (DK-26SSXB for waterproof narrow stile stainless steel; DK-26BKXB for waterproof narrow stile black; DK-16XB for interior single gang). The expansion board may also be ordered separately (DK-XB) to upgrade an existing unit. WEIGAND KEYPADS The rugged and reliable keypads that are the heart of the DK-26, DK-16 and DK-11 series are also available in versions which output Weigand 2601 data and therefore interface directly with any access control system that accepts this industry standard data protocol. With Securitron's Weigand units, you can easily add keypad controlled entries to an existing or newly installed access control system or in many cases you can combine a keypad with a card reader to enhance security by requiring authorized individuals to possess both

25 An ASSA ABLOY Group company a card and a PIN code. The Weigand version of the DK-11 (DK-11W) is a one-piece, fully integrated unit. With the DK-26/16 keypad, an external board is used to generate the Weigand data stream and it my be purchased individually or together with the associated pad. DIGITAL ENTRY SYSTEMS ORDERING INFORMATION DK-26SS DK-26BK Complete unit in satin stainless finish or black DK-26SSXB DK-26BKXB Expanded system with keypad in stainless or black finish DK-26PSS DK-26PBK Keypad only, satin stainless or black finish DK-16 Complete unit with single gang keypad DK-16XB Expanded system with keypad only, single gang DK-16P Keypad only, single gang DK-SSS DK-SBK DK-26 Spy Shield in satin stainless or black finish 25 The DK-26SS shown with optional spy shield. Both the keypad and spy shield are available in satin stainless and black finishes. DK-16: WHERE SINGLE GANG MOUNTING IS PREFERRED For indoor applications which require the power and security of the DK- 26, but which are more suited to a single gang plate to mount the keypad, the DK- 16 combines the pad of the DK-11 with the separate CPU board of the DK-26. Operation is the same as with the DK-26. TECHNICAL DATA KEYPADS DK-26 Dimensions: 1-1/2 x 7 x 1 38mm x 178mm x 25.4mm Finish: Satin stainless (DK-26SS) or Black (DK-26BK) Cable: 16 foot, 12 conductor, 22 gauge Operating Environment: Outdoor or indoor use Operating Temperature: -22 o F to +158 o F -30 o C to +70 o C Visual / Audible Indicators: Three LED s and a beeper Construction: Case stainless steel with 11 EPDM rubber keys (10 digits and bell key) DK-16 Size: Single Gang Finish: Satin stainless plate, white keys with black lettering on a black surface Cable: 16 foot, 12 conductor, 22 gauge Operating Environment: Indoor use. Outdoor weather resistant with weather cover. (See DK-11) Visual / Audible Indicators: Three LED s and a beeper Construction: Stainless steel backplate with 12 keys (10 digits and * and # keys. CPU DK-16 Dimensions Enclosure: 6 x 8 x 2-7/ x 203 x 73mm CPU Board: 4 x 6 (approx.) x 152.5mm Current Draw:Rest, 7 12V 20 24V Maximum:160mA@ 12V V Power Input: 12 to 24 volts AC or DC Auxiliary Power: Provides rectified DC power for electric lock or AC input. 2 A maximum. Relay: DPDT, 5 A maximum Operating Temperature: +32 o F to +158 o F 0 o C to +70 o C DK-11: SIMPLE YET POWERFUL THE DK-11 is a one piece unit intended for lower security requirements. It is furnished on a single gang brushed stainless steel plate with retrofit backbox. The keypad provides true 10 digit operation and includes red and green signaling LED s. The unit runs on 12 or 24 VDC power and control output is via an integral 5 Amp SPDT relay for operating fail safe and fail secure locks. All wiring is to a terminal strip found on the CPU board directly behind the plate. While primarily intended for indoor operation, an optional rain cover allows reliable use for exterior areas not exposed to direct rain. The pad itself is a U.S. made, high-volume unit with engraved, paint-filled keys. POWER AND FLEXIBILITY The DK-11 accepts a program code and 4 user codes from 2 to 7 digits so that different user groups can have their own code. Changing any user code is easily done by entering the program code (5 to 7 digits) first. Lock release time is also programmed from the keypad from 1-99 seconds. Selectable toggle mode energizes the relay when a valid code is entered and deenergizes it when a code is entered again. The DK-11 also has a REX (request to exit) input. This allows an external remote switch to trigger the unit just as if a code was entered. All codes are stored in non-volatile memory so that they are retained in a power failure. Finally, an alarm function locks out the keypad for 30 seconds after 16 wrong digits have been entered. The DK-11 delivers amazing capability in a compact, inexpensive package. DK-11 CPU The DK-11 and DK-16 keypads are provided with both flush mount and surface mounted back boxes. 25

26 26 DIGITAL ENTRY SYSTEMS DK-11 TECHNICAL DATA MAGLOCK ( ) Dimensions: Single Gang Size, 2-3/4 x 4-1/2 Finish: Brushed stainless steel plate, white keys with black lettering on a black surface. Power Input: 12 or 24 VDC Current Draw: 70 ma at 12 or 24 VDC Operating Environment: Indoor Use. Outdoor weather cover for weather resistance Operating Temperature: +32 o F to 158 o F 0 o C to 70 o C; Construction: Stainless Steel Backplate with keys, (10 digits and * and # keys). Visual Indicators: Red and Green LED s HOW TO ORDER DK-11 DK-11W WCC DK-11 System DK-11 with Weigand output Weather cover for DK-11/16 ORDERING INFORMATION Part Number Description Price DK-26SS Digital Keypad System Narrow Stile Stainless Steel $ DK-26BK Digital Keypad System Narrow Stile Black $ DK-26PSS Digital Keypad Narrow Stile Stainless Steel $ DK-26PBK Digital Keypad Narrow Stile Black $ DK-CPSS Cover Plate For DK-26 Keypad Mounting Satin Stainless 3x8 $30.00 DK-SBK Spy Shield for DK-26 Black $40.00 DK-SSS Spy Shield for DK-26 Stainless $40.00 DK-16 Digital Keypad System Single Gang $ DK-16P Digital Keypad Single Gang $ DK-16XB DK-16 With Expansion Circuit Board Single Gang $ DK-26SSXB DK-26 W/ Expansion Circuit Board Stainless Steel $ DK-26BKXB DK-26 With Expansion Circuit Board Satin Black $ DK-XB DK-16/26 Expansion Circuit Board Upgrade Kit $ DK-11 Digital Keypad System $ WCC Weather Cover Clear Single Gang $40.00 DK-11W Digital Keypad System Wiegand Output $ DK-16W Digital Keypad System Single Gang Wiegand Output $ DK-26WSS Digital Keypad System Narrow Stile Wiegand Output $ DK-26WBK Digital Keypad System Narrow Stile Black Wiegand Output $ DK-WRI Digital Keypad Wiegand Output Circuit Board Only $ ISO 9001 World Quality Standard A5066 The DK-26SS shown with Model 62 MAGNALOCK and the TSB-3CL Touch Sense Bar.

27 An ASSA ABLOY Group company POWER TRANSFER DEVICES POWER TRANSFER DEVICES 27 TSB-C Armored Door Cord McKinney Electric Hinge OVERVIEW ELECTRIC HINGES EPTL by Abloy OVERVIEW The installation of electric mortise locks which mount in the door or electrified exit devices (including Securitron s model TSB Touch Sense Bar) require a method for electrical power to be routed from the door into the door frame. To reliably accomplish this, Securitron offers three different product families with varying advantages and with different versions within each family for individual requirements. The electric hinge transfers power with the highest level of concealment. This aids security as a vandal won t easily be able to access the wires and also produces the most esthetically pleasing installation. Securitron offers two different electric hinge configurations which suit most North American hollow metal or wood doors: 4.5 x 4 inches (model EH-40) and 4.5 x 4.5 inches (model EH-45). These units are manufactured by McKinney Hinge, Securitron s sister company, entirely in the US and to the highest possible quality standards. The material is stainless steel with a brushed finish. Each hinge carries five color coded conductors with 28 gauge wire which emerge from each side of the hinge in flying lead fashion. The thinness of the wires is mandated by the limited physical space within the hinges and this does create a limit of 500 ma in current carrying capability. This current level is sufficient for signaling applications to alarm systems and can comfortably operate any of Securitron s Magnalocks (in an application where a switched exit device is releasing the Magnalock from the inside) but will not operate For State of the Art Smart Door Control! EPT by Abloy many electric locks made by others. Be sure you check the amount of current that your circuit will draw before selecting an electric hinge. Choosing between the two models is a matter of determining which hinge size is already present in the door (by measuring). It is not practical to try to install an electric hinge in a space occupied by a different size hinge. Note also that aluminum (storefront) type doors do not employ conventional butt hinges at all, but open on pivots. Securitron s other power transfer devices are appropriate for such doors. ELECTRIC POWER TRANSFER This unique, patented device is manufactured by Abloy, Securitron s sister company. It installs in the door and frame edges, so that its presence is concealed when the door is closed, thus maintaining good security and esthetic appeal. Two models are available: the EPT and EPTL. The EPT is suitable for most doors; the EPTL is required when the gap between the door and frame edges is large (see drawings at right). When compared to the electric hinge, the EPT series is more economical to purchase, but does require more labor for installation (a long slot must be routed in the door edge). A particular advantage of the EPT is that it accepts a thick cable and protects it within a flexible steel shield. The interior diameter of the shield is a generous 5/16 (8 mm) which will support interior wire cables up to.25 (6 mm) thick. This means that the EPT is suitable for 27

28 28 POWER TRANSFER DEVICES MAGLOCK ( ) EPTL ASSEMBLY IN DOOR FRAME HOW TO SELECT EPT or EPTL ) 6 6 9, ) ), ) 4, / / ' ' $ # & ' % #, : 1* , ' % % - 2 6, ) * - #, 1) , ), - / * , & & , 4 0 ) 5 * ; 2 - -, , 15 6 ) + - * ), - : 1* , ) * , 28 applications where relatively large current is required (such as operating many brands of electric mortise locks). The EPT is also a near universal device as it will work on any sort of door hung with butt hinges, continuous hinge or pivots. It will not function on a center pivot door as the gap between the door and frame edges becomes too great when the door opens. DOOR CORD The simplest and most economical solution for power transfer is Securitron s surface mounted door cord. This unit is furnished with Securitron s Touch Sense Bar but may also be purchased separately (part #TSB-C). The cord consists of an 18 (46 cm) length of armored stainless steel cable together with plastic end pieces. 3/8 (9.5 mm) holes are drilled in the face of the door and frame to admit the cord and the end pieces are screwed down over the holes to create a neat, finished appearance. The door cord comes furnished with end piece sets in two colors: light gray and black. This allows selection of end piece color so as to blend into the door/frame color as much as possible. The ample 18 cord length allows use on any type of door, including center pivot doors and doors that open well past The TSB-C cable has an interior diameter of.25 (6 mm) which will support interior wire cables up to.2 (5 mm) thick. This permits employing thick enough wiring for most high current applications. Compared to the Electric Hinge and Electric Power Transfer, however, the door cord is more vulnerable to vandalism and is visible on the door. ORDERING INFORMATION Electric Hinges EH-40 replacing 41/2" x 4" hinge EH-45 replacing 41/2" x 4 1/2" hinge Electric Power Transfer EPT for standard doors EPTL for large gap doors (see above) Door Cord TSB-C for all doors Part Number Description Price EH-40 Electrified Hinge 4.5" x 4" Stainless 5 Wire $ EH-45 Electrified Hinge 4.5"x4.5" Stainless 5 Wire $ EPT Electrical Power Transfer Standard Version $60.00 EPTL Electrical Power Transfer Long Version $80.00 TSB-C TSB Door Cord With Gray & Black Caps 18" Cord $15.00 ISO 9001 World Quality Standard A5066

29 An ASSA ABLOY Group company POWER SOURCES Ready-To-Install Power Supplies and Power Accessories POWER SOURCES 29 OVERVIEW Securitron manufactures a variety of outstanding products designed to supply and monitor 12 or 24 Volts for the operation of security and safety equipment. The BPS Series DC Power Supplies include battery charging capability with capacities from one to 15 Amps. The BACS Series provides high capacity 12 and 24 volts AC power. The model PSM Power Supply Monitor functions as an alarm system for your BPS series supply and our plug-in DC supplies and potted bridge rectifier fit into simpler applications. BPS SERIES: CLASS 2 WITH OR WITHOUT BATTERIES All models are UL listed and incorporate integral battery charging capability which keeps the sealed lead acid gel/cell at full charge for instantaneous stand-by power in case of line voltage failure. All models in the series are Class 2 rated by UL which means that output wiring need not be run in conduit. The BPS-12-1 and BPS-24-1 are one amp units that incorporate a fused AC input and a regulated DC output. A 2.5 Amp current limiting automatic breaker protects the stand-by batteries from driving into a short Fuse protected AC input Fire Alarm interface Slide switches for output disable/reset LED indicator Automatic breakers protect DC outputs Individual screw terminals for positive and negative Class 2 outputs The multi-featured CCS board allows easy hook-up and control for the BPS series 2 amp or greater power supplies. 29

30 30 POWER SOURCES MAGLOCK ( ) BPS Series Power Supply shown with optional Battery Pack 30 circuit. Plus, in the event of a DC short, the supply s regulator will go into thermal cut-off, switching off the output. The power supply enclosure is sized large enough to include at least two optional four amphour batteries and the unit can charge up to a 20 AH pack (batteries mounted externally). BPS SERIES WITH CCS CONTROL MODULE For larger applications and installations where multiple devices are being powered, Securitron offers the higher-amperage BPS Power Supply Series with integral CCS-4 or CCS-8 Power Control Module. The CCS board provides a fused line voltage input and four or eight DC outputs on separate UL Class 2 Listed current limited automatic circuit breakers. Each circuit can be individually turned on and off via a slide switch and the powered status of each is shown by an LED. There is no need for extra AC wiring of additional dedicated supplies in a multiple zone device installation and in the event of a DC short, the problem is confined to the zone in difficulty. The BPS continues to power all other stations, uninterrupted by the faulty component. An LED indicator light on the front cover illuminates when the power supply module is in operation and the unit will charge up to 20 AH battery packs (for larger packs, consult the factory). ADDING ADDITIONAL CLASS 2 OUTPUTS AND FIRE ALARM INTERFACE While BPS series supplies are delivered with four or eight outputs depending on the model, the CCB-8 slave board may be optionally ordered to add eight additional Class 2 outputs. The more boards you add, the more outputs become available. Also, for added safety, the CCS-8 module has emergency release terminals. These can be broken by an external switch opening such as a relay controlled by the fire alarm system. This will automatically release all the devices being driven by the supply. BPS SERIES SPECIFICATIONS THE POWER SUPPLY MONITOR For critical applications, Securitron offers the remarkable Power Supply Monitor as an accessory for its larger DC supplies. Available in 12 or 24 volt versions, the PSM can operate with all BPS series supplies with capacities of 2 Amps or more. The Power Supply Monitor functions as an alarm system for the supply as it monitors all key functions and reports any trouble. The output voltage is continuously read to insure that it remains within tight limits which are necessary for proper float charging of the battery pack. A high or low variance is separately signaled by audio/visual latching alarms at the PSM enclosure and simultaneous dry contact switching for remote notification. The PSM also checks the battery pack by taking it off charge three times a day and subjecting it to an extended load test. Failure is reported so that the pack may be replaced and naturally, the test is immediately terminated in the event of an actual power failure so that the load will continue to operate. 12 VDC Capacity 24 VDC Capacity Outputs Cabinet Size BPS-12-1 BPS-12-3 BPS BPS-12-6 BPS-12-9 BPS A 3 A 4.5 A 6 A 9 A 15 A BPS-24-1 BPS-24-2 BPS-24-3 BPS-24-4 BPS-24-6 BPS A 2 A 3 A 4 A 6 A 10 A X 9 X 4 14 X 14 X 4 14 X 14 X 4 15 X 18 X 6 15 X 18 X 6 15 X 18 X 6

31 An ASSA ABLOY Group company POWER SOURCES 31 CCB-8 SLAVE BOARD Another important PSM report is whenever the batteries have switched in to the load. This provides vital warning that the load will continue to operate for only the standby duration of the pack. The batteries will switch in not only from an obvious facility power failure, but from a local AC breaker trip or a failure of the DC output of the supply. The PSM report always keeps your system working supplies 10 Amps of 24 VAC power. The BACS series employs the same multiple zone control concept as the BPS series as it includes nearly identical control boards (part number CCS-8A), which provide eight automatically breakered outputs with individual control switches and LED s. As with the BPS series, additional slave boards may be ordered to add eight extra zones (part number CCB-8A). PM SERIES: AN ECONOMY POWER SOLUTION WITH BATTERY BACKUP SIMPLE, UL LISTED DC POWER: PLUG-IN DC FILTERED SUPPLY We offer these hard-to-find DC units in two versions: ma maximum capacity (model PSP-12) and ma maximum capacity (model PSP-24). They feature an internal thermal fuse and are UL and CSA listed. A 16 ft. output cable is included. They are ideal for powering a wide range of DC devices. Securitron's PM-12 and PM-24 power supplies are similar to the BPS-12-1 and BPS-24-1 units except they employ separate plug-in transformers which interconnect with a circuit board housed in a steel enclosure. Since the transformer plugs into a wall socket, installation does not require the services of an electrician. The PM units also feature regulated, adjustable power with integral sealed lead acid/gel cell battery charging capability while meeting Class 2 electrical requirements. THE UL LISTED BACS SERIES: HIGH CAPACITY AND MULTI-ZONE Primarily intended for powering CCTV cameras, Securitron s BACS supplies 20 Amps of 12 VAC power and the model BACS- AC POWER SOLUTIONS: BRIDGE RECTIFIER The model BR-7 bridge rectifier will convert an AC input, like our TP Series transformer, to full wave rectified DC output with a maximum 7 Amp capacity. It s manufactured in a 1 cube potted package with 18 color coded flying leads. This full insulation allows it to be field wired between a transformer and DC load device without concern for short circuits. 31

32 32 32 POWER SOURCES TECHNICAL DATA BACS Series AC Power Supplies: BACS-12-20: 12 VAC Output, 20A capacity BACS-24-10: 24 VAC Output, 10A capacity Power Input: 115 VAC (220 VAC available) Cabinet Size: 12 x 18 x 24 UL Listed: UL E PM Series Power Supplies: PM-12: 12 volt, 1A capacity PM-24: 24 volt, 1A capacity Power input: 115 VAC (transformer supplied) Enclosure: 6" x 8" x 2 7/8" UL Listed PSM Power Supply Monitor: PSM-12: for 12 VDC Supply 3A or greater PSM-24: for 24 VDC Supply 2A or greater Power Input: VDC power from corresponding power supply Cabinet Size: 12 x 7-1/4 x 3-1/4 PSP Plug-in Power Supply: PSP-12: 12 VDC, 700 ma output PSP-24: 24 VDC, 350 ma output Power Input: 115 VAC Size: 2-1/4 x 2-1/4 x 2-1/2 with 16 wire leads UL Listed: UL E8297 BR-7 Bridge Rectifier: BR-7: Bridge Rectifier for 12 or 24 VAC Capacity: 7A input/output Size: 1 x 1 x 1 with color coded wires 18 long BPS Series Listings & Approvals: Underwriter s Laboratories: SA6635 and BP7041 Underwriter s Laboratories of Canada: CMS140, SA6635 & BP7041 California State Fire Marshall: :102 and :103 City of New York-Dept. of Buildings: MEA251-95E and MEA254-95E City of Cleveland-Board of Building Standards and Building Appeals: S-5-89 US Veteran s Administration: M.P.3 Part III US Department of Defense: Listed ORDERING INFORMATION BPS Series DC Power Supplies: See specification chart on the previous page for part numbers, capacity, outputs and cabinet size. Power input: For 220 VAC input, add "H" to part number. (i.e. BPSH-24-3) Part Number Description Price BPS-12-1 Power Supply 12VDC-1 Amp $ BPS-12-3 Power Supply 12VDC-3 Amp $ BPS Power Supply 12VDC-4.5 Amp $ BPS-12-6 Power Supply 12VDC-6 Amp $ BPS-12-9 Power Supply 12VDC-9 Amp $ BPS Power Supply 12VDC-15 Amp $ BPS-24-1 Power Supply 24VDC-1 Amp $ BPS-24-2 Power Supply 24VDC-2 Amp $ BPS-24-3 Power Supply 24VDC-3 Amp $ BPS-24-4 Power Supply 24VDC-4 Amp $ BPS-24-6 Power Supply 24VDC-6 Amp $ BPS Power Supply 24VDC-10 Amp $ BPSH-12-1 Power Supply 12VDC-1 Amp 220VAC $ BPSH-12-3 Power Supply 12VDC-3 Amp 220VAC $ MAGLOCK ( ) Part Number Description Price BPSH Power Supply 12VDC-4.5 Amp 220VAC $ BPSH-12-6 Power Supply 12VDC-6 Amp 220VAC $ BPSH-12-9 Power Supply 12VDC-9 Amp 220VAC $ BPSH Power Supply 12VDC-15 Amp 220VAC $ BPSH-24-1 Power Supply 24VDC-1 AMP 220VAC $ BPSH-24-2 Power Supply 24VDC-2 Amp 220VAC $ BPSH-24-3 Power Supply 24VDC-3 Amp 220VAC $ BPSH-24-4 Power Supply 24VDC-4 Amp 220VAC $ BPSH-24-6 Power Supply 24VDC-6 Amp 220VAC $ BPSH Power Supply 24VDC-10 Amp 220VAC $ CCB-8-12 Control Board 12VDC 8 Fused Outputs $ CCB-8-24 Control Board 24VDC 8 Fused Outputs $ B-12-4 Battery 12 VDC 4 Amp Hour $45.00 B-24-4 Battery 24VDC 4 Amp Hour $ PSM-12 Power Supply Monitor 12VDC $ PSM-24 Power Supply Monitor 24VDC $ PM-12-1 Plug-In Power Module 12VDC-1 Amp w/ Charger & Enclosure $ PM-24-1 Plug-In Power Module 24VDC-1 Amp w/ Charger &Enclosure $ PSP-12 Power Supply Plug-In 12VDC ma $35.00 PSP-24 Power Supply Plug-In 24VDC ma $35.00 TP-12-3 Transformer Plug-In 12VAC-3 Amp $30.00 TP-24-2 Transformer Plug-In 24VAC-1.5 Amp $30.00 BR-7 Bridge Rectifier 7A $25.00 BACS Power Supply 12VAC - 20A $ BACS Power Supply 24VAC - 10A $ BACSH Power Supply 12VAC - 20A 220VAC $ BACSH Power Supply 24VAC - 10A 220VAC $ POWER UP A DK-26 KEYPAD REMOTE CPU INCLUDED BULLETPROOF. ISO 9001 World Quality Standard A5066 9

33 An ASSA ABLOY Group company TIMERS, ETC. A Wide Variety of Timers and Logic Boards to Enhance Any Application TIMERS 33 OVERVIEW Securitron manufactures an outstanding line-up of accessory timers and logic boards with the features you need to complete or enhance security installations. Circuit boards are supplied with plastic snap-trak for mounting or are furnished in a plastic enclosure. The products offered have all been designed by Securitron in response to real world problems and they have the features required by our industry. TIMEMATE MODEL TM9 The TimeMate, Model TM9 is an ultra-miniature timer that functions to extend momentary switch closures (N/O) up to 36 seconds. It is commonly used in outlet boxes with keyswitches or push button controls solving the problem of where to put the timer. The TimeMate either fits in the box or can be mounted on the exterior with supplied double stick tape. When the switch is operated, the TimeMate s 3 Amp SPDT relay energizes for 2 to 36 seconds after which it resets. The time setting is precisely selected by a bank of dipswitches rather than by a pot. Common applications include releasing electric locks and shunting alarm points. The TimeMate operates on 12 VDC, 24 VDC or 24 VAC power. Actual size: 3/4" x 1" x 2" EXIT DELAY TIMERS XDT-12 & XDT-24 This microprocessor timer allows full compliance with NFPA 101, UBC, BOCA, SBC and Canadian building codes for delayed exit. In general, delayed exit function is as follows: When an initiate switch in an exit bar or push button closes, an optional nuisance delay up to 3 seconds operates, during which the board signals the alarm. If the initiate switch is released before the nuisance delay expires, nothing further happens. If not, the board goes into irrevocable release delay. The fail safe lock releases at the end of a 15 or 30 second release delay period. It then must be relocked from an external NC switch. The XDT also has powerful selectable modes which allow it to meet specific and detailed differences in each code. It also integrates with access control by providing non-alarmed entry delay, lock status monitoring and the ability to set door operation into any of four different modes from an external switch or time clock. It is available in separate 12 and 24 VDC versions. The XDT is also available in a 6" x 6" lockable steel enclosure (BA-XDT, 12 or 24), or a flush-mount enclosure with an 8" x 8" stainless steel plate (FA-XDT). Both are prewired with audible alarm. Actual board size: 3 1/4" x 4 1/4" 33

34 34 34 TIMERS TIMEMASTER MODEL TM-2 The TimeMaster is an industrial quality multi-function timer with a unique array of features. It operates on 12 or 24 volts AC or DC and has a 5 Amp DPDT relay output. Dip switches select exact delay times of 1 to 255 seconds or 1 to 255 minutes. Seven operating modes can be chosen: On delay (timer is powered; relay energizes after delay and resets when the timer is unpowered); Triggered on delay (same operation started from external switch); Off delay (timer is triggered; relay energizes immediately and resets after delay); One shot (non-retriggerable off delay); Toggle (trigger closure energizes relay; next closure reset etc.); Cyclic (relay cycles on and off at time interval set); and Pulse output (relay pulses for 1/ 4 second as external switch changes state). Triggering can be from an N/O or N/C switch, and finally the TimeMaster includes a unique flashing LED drive output which steadily increases in frequency as the unit times out, providing visual indication of the time remaining. Actual size: 3 x 4. PRIME TIME MODEL DT-7 The Prime Time digital 7-day timer is used to turn electric locks or other security systems on and off at programmed times. A 10-amp DPDT relay can be operated in toggle or pulse mode at selectable times during the week, with 12 programmed on/off times set daily, on selected days, or on blocks of days (Mon - Fri, Mon - Sat or Sat - Sun). The exclusive First Man In feature delays operation until an external switch changes state which automates holiday programming in many applications. The Prime Time operates on volts AC or DC. An AA cell provides five year backup to the display module program memory. Actual size: 7 x 3. DOOR PROP ALARM DPA-12 & DPA-24 The Door Prop Alarm is a multifunctional control timer that operates as a sophisticated door prop alarm with options that permit the flexibility to meet specific requirements of end user. The DPA not only monitors whether the door has been propped open, but when used with the Senstat feature of the Magnalock and a door position switch it can detect any attempts to tamper with lock status or door status. The Door Prop Alarm comes equipped with three separate outputs which can provide local and remote signaling based on a user selectable time interval. Other features include a bypass mode for valid access/egress needs as well as a duress alarm function when used with a N/O switch. It is available in separate 12 and 24 VDC versions. Actual board size: 3-1/4 x 4-1/4. Overall size in box: 5-5/8 x 5-1/2 x 2-7/ MAGLOCK ( ) RELAY BOARD RB-4-12 & RB-4-24 All Electronic Boards are mounted on snap track for mounting ease. The XDT and is available in a locking enclosure with audible alarm. Relay Boards are a simple and economical way to add relays to installations for numerous uses including shunting, interlocking and reporting. Each board mounts 4 DPDT relays with 1 Amp contacts. All dry contact connections are brought out on screw terminals. Individual coil connections can be common negative or positive. The relays selected have extremely low current coils (15 ma at 12 VDC; 8 ma at 24 VDC) allowing operation from most LED drive outputs. The RB-4 replaces expensive and cumbersome socket mount relays and permits a much more attractive installation than installing individual relays with double stick tape. Actual size: 3 x 3-3/4. RELAY LOGIC PACK RLP-12 & RLP-24 Packaged in an ultra-miniature plastic case, the RLP is a multifunction circuit pack. Its primary use is to allow integration of lock status sensing outputs (such as from Securitron s Senstat version Magnalock) with access control systems that require N/O or N/C dry status signals coupled with a delay before lock status changes state. Without the delay the access control system would alarm every time the door is used because of the immediate change in lock status. The addition of the RLP solves these problems. It can also be used to create a relay interlock circuit, an inter-locked trap entry (when coupled with 2 electric locks), and can function as a DPDT relay, with one Amp contacts. The relay logic pack is available in separate 12 and 24 VDC versions. Actual size: 3/4 x 1 x 2. ORDERING INFORMATION Part Number Description Price TM-9 Time Mate 2-36 Second SPDT Timer 12/24VDC $60.00 TM-2 Time Master II Multi-Function Timer DPDT 12/24VDC $ DT-7 Prime Time 7 Day Digital Timer $ XDT-12 Exit Delay Timer 12VDC $ XDT-24 Exit Delay Timer 24VDC $ DPA-12 Door Prop Alarm 12VDC $ DPA-24 Door Prop Alarm 24VDC $ RB-4-12 Relay Board-12VDC 4 x DPDT-1 Amp $ RB-4-24 Relay Board-24VDC 4 x DPDT-1 Amp $ RLP-12 Relay Logic Pack 12VDC $40.00 RLP-24 Relay Logic Pack 24VDC $40.00 PZ1 Piezo Single Gang $50.00 ISO 9001 World Quality Standard A5066

35 An ASSA ABLOY Group company INDUSTRIAL CABINET LOCKS More Innovative State of the Art Smart! Security Solutions INDUSTRIAL CABINET LOCKS 35 MAGNETIC CABINET LOCK MCL-24 SOLENOID CABINET LOCK SCL-24 OVERVIEW Securitron offers state of the art, compact electric locks for control of cabinets and other industrial openings. The MCL-24 is a miniature electromagnetic lock which despite its size, delivers a remarkable holding force of 200 lbs (90 Kg). The even smaller SCL-24 is a solenoid bolt lock with a holding force of 600 lbs (275 Kg). Typical applications for these locks include: jewelry cases, museum cases, gun cabinets, pharmaceutical storage cabinets, cash drawers and any sort of door or drawer which will physically accommodate either lock. MAGNALOCK TECHNOLOGY COMES TO CABINET CONTROL Securitron is the world leader in electromagnetic locks and the growing popularity of this type of lock stems from a series of intrinsic benefits: Electromagnetic locks have no moving parts and an unlimited operating life Because the door is not mechanically blocked, there is no possibility of jamming on release The lock self-aligns to operate reliably even when the door doesn t fit well Securitron s waterproof designs operate indoors or outside in any environment True fail safe operation always releases when power is removed The MCL-24 brings these benefits to industrial cabinet control. ROBUST PERFORMANCE DESPITE COMPACT SIZE With a size of only 4.6 x.75 x 1.14 (117 x 19 x 29 mm), the MCL adapts to a wide variety of cabinet locking applications. The strike plate mounts on the moving door or drawer and the electromagnet body mounts on the fixed frame. A universal bracket is supplied which can be affixed to either the magnet or strike plate for maximum mounting flexibility. The simple act of closing the cabinet brings the strike plate and magnet body together and secures the cabinet with 200 pounds holding force while operating on 24 volts DC and drawing a miniscule 1.5 watts of power (62 ma). Operation of the Magnalock is silent and it can be controlled by virtually any sort of switching device including a digital keypad, card reader, remote control switch or keyswitch. 35

36 36 INDUSTRIAL CABINET LOCKS MAGLOCK ( ) The MCL's UNIVERSAL BRACKET MOUNTS TO STRIKE OR LOCK The SCL PERMITS VERTICAL, HORIZONTAL OR CORNER MOUNTING UNMATCHED STRENGTH IN A SOLENOID CABINET LOCK The SCL-24 is a fail secure solenoid lock which fits into the most size limited applications (the lock body measures 1 1/16 x 1 1/8 x 2 5/ 8 or 27 x 28.5 x 66 mm). The lock body mounts on the fixed frame and the keeper mounts on the moving door or drawer. Despite its high degree of miniaturization, the SCL-24 holds an amazing 600 lbs (275 Kg) which provides a strong level of security for cabinet locking applications. In most installations, fastener strength is breached before the lock is defeated. FLEXIBLE MOUNTING; FAIL SECURE OPERATION The SCL easily adapts to an array of mounting possibilities as the keeper can enter the lock body in any of three positions. Cabinets with doors that swing open can be accommodated as can pull-out or sliding drawers. And for retrofit applications the SCL-T installation tool makes setting the mounting holes a breeze. The SCL-24 is a fail secure device (it receives power to release the door) and it draws 200 ma when it is activated. A fail secure lock draws no current at all in the normal (secure) condition which means that a relatively small power supply can operate a large number of SCL s. It is an intermittent duty lock which should only be used when the cabinet is to be released only for a few seconds to gain access rather than for lengthy periods of time. PRODUCT SELECTION ISSUES The MCL-24 must be chosen for applications requiring continuous duty (the cabinet is released for extended periods of time), or for operation in outdoor environmental conditions. It is preferred for applications where operational reliability is critical (jamming is impossible with electromagnetic locking) or where the daily volume of openings is high. The SCL-24 is preferred for applications in the most limited space as well as those which demand the highest physical security. It is also more economical to purchase but it does not support outdoor use or use where the cabinet will be released for extended periods of time. Magnetic Cabinet Lock Power: 24 vdc Current Draw: 62 ma (Fail safe.) Operating Environment -40 to 60 C, -40 to 140 F Suitable for outdoor use (NEMA 4X equivalent). All ferrous metal surfaces plated to MIL spec. Magnet case: brushed stainless steel standard. Dimensions: 4 5/8 x 3/4 x 1 9/64 or 117 x 19 x 29mm ORDERING INFORMATION Part Number Description Price MCL-24 Magnetic Cabinet Lock 24VDC $ SCL-24 Solenoid Cabinet Lock 24VDC $ SCLT Solenoid Cabinet Lock Installation Tool $30.00 WOW... A MAGNETIC CABINET LOCK. WE RE ENGINEERING INNOVATION. 36 TECHNICAL DATA Solenoid Cabinet Lock Indoor use only. Holding Force: 600 lbs.; intermittent duty. Power: 24 vdc Current Draw: 200 ma (Fail secure) Dimensions: 1 1/16 x 1 1/8 x 2 5/8 or 27 x 28.5 x 66 mm ISO 9001 World Quality Standard A5066

37 An ASSA ABLOY Group company MAXIMUM SECURITY SWITCH 37 MAXIMUM SECURITY SWITCH A New Standard In High Security MSS-1G MSS-1 OVERVIEW Securitron s Maximum Security Switch (MSS) represents the ultimate in position monitoring devices. It is used to monitor the open/ closed status of doors, windows, gates, machinery safety barriers or other moving assemblies where either high security and/or safety are required. The high security balanced magnetic switch provides superior defeat resistance, easy, accurate installation, false alarm reduction and versatile indoor-outdoor application. The compact design is esthetically pleasing when installed. The optional remote test feature insures the operational integrity of each individual switch. The MSS is available with a jacketed cable for hidden routing throughout the frame or with stainless steel cable for a surface run installation. The MSS series is UL listed as a high security switch with indoor/outdoor rating, complies with DCID s, and has been accepted by DIA for use within SCIF s. impossible to remove the magnet pack from the door without signaling an alarm If a second Securitron magnet pack is obtained, it cannot be employed to defeat the MSS for two reasons. Co-planar operation means that the switch module can only read one magnet pack at a time and we have built in an additional defense: MSS switch modules and magnet packs are matched pairs. By altering polarities, we are able to make only certain switch modules and magnet packs operate with each other. A criminal attempting to defeat the MSS will not know if he has a compatible magnet pack, as the polarities are not marked. TEMPLATED INSTALLATION FOR THE MOST RELIABLE OPERATION UNMATCHED DEFEAT RESISTANCE All high security switches strongly resist defeat with a single external magnet but may be vulnerable to more sophisticated attacks including physical removal of the switch module from the frame, physical removal of the magnet pack from the door, or acquisition of a second magnet pack which is then placed near the switch module while the door is opened. To defend against switch module removal, the MSS incorporates a hidden, normally closed tamper switch. An attempt to remove the switch module will result in an alarm. The tamper output can be separately monitored or connected in series with main switch output. Removal of the magnet pack from the door is a more serious threat. Since the magnet pack is not wired, it cannot be monitored. To overcome this, the MSS utilizes co-planar operation. This requires that the magnet pack be in the same narrow read angle plane as the switch module. This restriction, coupled with the MSS s unique mounting method on both outswinging and inswinging doors, makes it virtually Maximum Security Switch Inswing Mount STOP TAMPER SCREW CABLE HEADER LABEL DOOR SWITCH MODULE SEPARATION DISTANCE MAGNET PACK 37

38 SEPARATION DISTANCE 38 MAXIMUM SECURITY SWITCH MAGLOCK ( ) Maximum Security Switch Outswing Mount HEADER LABEL DOOR STOP CABLE TAMPER SCREW TECHNICAL DATA Main Output: SPDT at maximum of 125 or 250 Tamper Output: Closed when secure; open to alarm. 1 A maximum current. Operating temperature: -40F to 150F (-40C to 65C) MAGNET PACK Operating gap: Optimum centered separation distance is marked on each unit. It is typically between (7.6MM-12MM). ± tolerance around this optimum separation ranges from.2 (5MM) to.3 (7.6MM). SWITCH MODULE Size: Magnet Pack:.75 x.75 x 4.25 (19 x 19 x 108MM); Switch Module:.75 x 1.5 x 4.25 (19 x 38 x 108MM) Finish: Satin black standard QUICK AND RELIABLE INSTALLATION Other high security magnetic switches perform differently mounted on steel than on wood or aluminum, but the MSS is 100% magnetically shielded so it operates the same way on all surfaces. This allows us to supply an installation template with exact optimum separation distance so that as each MSS is mounted, you will know it is centered within its operating gap for the lowest chance of false alarms. It is not necessary to pre-check with an Ohmmeter in the field. The MSS is supplied in two versions for different installation environments. For use on a door with hollow frame, the MSS-1 provides a jacketed cable, which is hidden in the doorframe. This provides optimum appearance and security. For monitoring other types of openings, or where the cable cannot be hidden in the doorframe, the MSS-1G includes a 3-foot length of stainless steel armor to protect the cable in a surface run. BEST APPEARANCE The MSS is more compact than competitive units and its mounting method has been laid out such that it installs unobtrusively on outswinging or inswinging doors without the need for external brackets and with the cable hidden. This also naturally maintains a stronger defense against tampering or removal. Note the cross section drawing to appreciate this benefit. U.S. Patent #5,668,533 ORDERING INFORMATION Model MSS-1 for jacketed hidden cable Model MSS-1G for surface mount stainless steel cable protection. Model MSS-1C is a concealed unit which fits into a standard ANSI 4 7/8 strike cutout. (not pictured) Add RT to part number for remote test option (i.e. MSS-1-RT) Contact the factory for the flush mount version. Part Number Description Price MSS-1 High Security Switch Surface Mount $ MSS-1-RT High Security Switch Surface Mount with Remote Test $ MSS-1C High Security Switch Concealed $ MSS-1C-RT High Security Switch Concealed Remote Test $ MSS-1G High Security Switch Surface Mount $ MSS-1G-RT High Security Switch Surface Mount Remote Test $ REMOTE TEST OPTION A building with many monitored openings must be assured that each switch is functioning. In certain high security installations, testing each switch is a procedural mandate. With Securitron s remote test option, this is done electronically from a central point rather than by opening each door. The MSS uses a unique two step test on a three-wire circuit. Voltage is sent first to input #1 of all switches. If all switches go into alarm, the test is passed. Next, power is sent to input #2 and again, all switches must go into alarm. If a switch fails to alarm on both tests, it is completely non-functional probably due to tampering. A subtler defect is if a switch fails to go into alarm on one of the two tests. Part of its internal circuitry has failed so it is only operating as a standard low security switch and could be compromised. THE INDUSTRY S ONLY UNCONDITIONAL LIFETIME WARRANTY. LATCH MONITORS MAXIMUM SECURITY SWITCHES

39 An ASSA ABLOY Group company LATCH / BOLT MONITOR LATCH / BOLT MONITOR Monitor Actual Latch Or Bolt Status, Not Just A Closed Door! 39 LMD-1 LMS-1 LML-1 LML-2 OVERVIEW By electronically verifying mechanical latch and bolt positions, Securitron LM Series latch monitors detect and report to the building alarm or access control system that a door is actually latched or bolted, not just closed. They install easily, are concealed behind existing hardware, and require no jamb or strikeplate modification. Three models in two sizes accept all North American latches or bolts. The innovative patented design automatically copes with variations between different brands of latching hardware without requiring installer adjustments. The LMS-1 includes a single SPDT switch and fits any standard 2 3/4" ANSI cut-out. The LML-1 also has a single SPDT switch and fits any standard 4 7/8" ANSI cut-out. The LML-2 monitors a mortise latch and deadbolt separately, features two separate SPDT switches, and fits any standard 4 7/8" ANSI cut-out. When monitoring hook or swing bolts, conventional magnetic contacts report a door as simply closed, without confirmation that it s secure. The deadlock monitor model LMD-1 can be used with an Adams Rite MS type deadlock or similar brand to report the locked or unlocked status of narrow stile aluminum frame doors, including sliding glass doors. And the LMD-1 installs quickly in door frame stiles without routing just three holes to drill! COMMON APPLICATIONS The primary value of the Latch Monitor family is to deliver higher security through reporting the latched or bolted status of doors with a building, rather than merely reporting that they are closed or nearly closed. The operating gaps associated with magnetic contacts make them report secure even when a door is not latched, so long as it is almost closed. Securitron's Latch Monitor series eliminates this weakness with a simple, reliable and universal design. Retail stores provide a particularly pertinent example of the latch monitor's value. Larger shops will have numerous aluminum frame glass (storefront) doors leading outside. At closing time it's all too easy for a clerk to forget to lock down one of these doors prior to arming the alarm system and leaving. This condition invites quick entry and theft, or a false alarm event when wind pushes the door partially open. Use of the LMD-1 insures that all doors are locked, or the system will not arm. A secondary use of the latch monitor is to initiate delayed exit when an interior latch is withdrawn on a door equipped with a Magnalock and Securitron's model XDT logic timer. FIGHT FALSE ALARMS! False alarms are not only embarassing to a system owner, but are also costly when police departments levy false alarm fines aimed at reducing the waste of law enforcement resources. An important cause of false alarm occurs when an armed system reports a nearly closed but unlatched or unbolted door as secure. The door subsequently swings open from the wind or is moved by an individual without criminal intent, and police are erroneously dispatched. Using a Latch Monitor completely eliminates this kind of problem. And for many installations, Latch Monitors are inexpensive enough to be employed in all the doors or alternately they can be selected for those critical openings most subject to this type of false alarm event. 39

40 40 LATCH / BOLT MONITOR MAGLOCK ( ) LMD-1 The LMD-1 employs a spring steel arm which deflects as a deadlock slides into locked position. The relatively long arm provides ample margin for error in mounting position. EASY INSTALLATION For Wooden Door Frames: Simply remove the strikeplate chisel for increased depth if necessary make electrical connections, insert unit and replace the strikeplate. For Metal Door Frames: Metal frames may require minimal filing or tab removal in some cases. LMD-1 Installation in Aluminum Frames: Drill one, central 9/16" (15MM) hole, and two 1/8" (3mm) holes. Drive rivets are supplied which seat the unit flush to the frame with only a hammer tap. Note that each unit is furnished with a 6 (2m) jacketed cable so that splicing need never be done within the door frame. AS PART OF EXIT DELAY Latch Monitors are an integral part of any complete Magnalock Exit Delay system. Securitron's Family of Exit Delay Components ORDERING INFORMATION LMS-1 for any latch or bolt seated in an ANSI 2 3/4" strike. LML-1 for any latch or bolt seated in an ANSI 4 7/8" strike. (In the case of a mortise lock with combined latch and bolt in a 4 7/8" strike, the LML-1 will report secure when either the latch or bolt is engaged.) LML-2 for a mortise lock with combined latch and bolt in an ANSI 4 7/8" strike when you wish to separately monitor the latch and/or bolt. LMD-1 for narrow stile deadlock or hookbolts used in storefront or sliding doors such as Adams Rite MS series. Part Number Description LMD-1 Latch Monitor For Aluminum Door Deadlock SPDT 3 Amp $30.00 LML-1 Latch Monitor ANSI 4 7/8 SPDT 3 Amp $30.00 LML-2 Latch Monitor ANSI 4 7/8 w/ Deadbolt SPDT 3 Amp $50.00 LMS-1 Latch Monitor ANSI 2 3/4 SPDT 3 Amp $25.00 Price Where mortise hardware is present, wiring to the strike is accessible and tampering is a minor concern, an LM series latch monitor is ideal for delay initiation. Mounted right behind the strike, it operates by detecting latch withdrawal during an exit attempt. TECHNICAL DATA Contact Rating: SPDT, 2 24 Volts Operating Temperatures: -40 F to 160 F (-40 C to 71 C) Dimensions: LMS-1 Single for ANSI 2-3/4" strike: 2-5/8" x 1-3/16" x 7/8" LML-1 Single for ANSI 4-7/8" strike: 4-5/8" x 1-3/16" x 7/8" LML-2 Double for ANSI 4-7/8" strike with dead bolt: 4-5/8" x 1-3/16" x 7/8" LMD-1 Single for use with aluminum frame deadlocks. U.S. Patent #5,757,269 and #5,825,288 40

41 An ASSA ABLOY Group company LOCK CONTROL PANELS UL Listed Central Control and Monitoring for Any Electric Lock LOCK CONTROL PANELS 41 FLUSH MOUNT WALL MOUNT RACK MOUNT DESK MOUNT OVERVIEW The LCP Series panel is designed to operate any DC electric lock or strike that operates on 12 or 24 volts (fail safe or fail secure.) Other electric locks can be accommodated by adding relays. The panel is constructed of control zones supplied in multiples of four. A single multi-color monitoring LED per zone displays four possible conditions of the lock: Green shows that the zone is secure and this condition may be driven from a door switch, lock status switch or the power status of the lock. "Off" shows that the lock has been legally released from either the panel control switch or from a remote switch at the door. In this condition, the toggle switch itself illuminates yellow. Red is the alarm condition showing that a lock which should be secure is not reporting secure. This condition is latching and is reset from a momentary switch once the zone has been resecured. A Sonalert accompanies the red violation condition. Orange shows that the zone has been resecured and is ready for alarm reset. After reset, the indicator turns green again. PANEL CONFIGURATIONS The LCP is delivered standard in a slope front desk mount console. A maximum of 24 zones can be installed on the largest console. If more zones are needed, multiple consoles are supplied. Optionally, the panel can be supplied in a NEMA 1 hinged wall mount enclosure with key lock, in a flush plate with knockout equipped back box, or in a 19 rack mount face plate. The size of the enclosure or plate depends on the number of zones ordered. EASY INSTALLATION Three to six wires run from the panel to each door depending on the complexity of the equipment used at the door. All wires terminate to identified screw terminals in the panel. A comprehensive manual is supplied with the product which shows hookup drawings for the full range of possible door control functions. No guesswork or circuit design is required from the installer. DOOR MONITORING The LCP also finds use as a door monitoring panel when electric locks are not installed. The control switch in this use arms or disarms the monitored zone. With the switch on (armed), the indicator will show green when the door is closed and will show a latching red condition accompanied by the Sonalert when the door is opened. With the switch off (disarmed), the indicator will be off regardless of door position. On a custom basis, the LCP panel can be supplied with indicator lights only (no control switches.) 41

42 42 42 LOCK CONTROL PANELS SYSTEM OPTIONS A range of options expand the functions of the panel. Options with an asterisk (*) may be generally added in the field if they were not ordered with the panel. (AM OPTION) PUSH BUTTON (HT OPTION) ON OFF NO LIGHT = NORMAL YELLOW = ALARM NO LIGHT = UNLOCKED ORANGE = READY TO RESET RED = VIOLATION GREEN = SECURE TOGGLE (STANDARD) SILENCE LATCH* (OPTION SLR ) This option adds a momentary illuminated button which is used to silence the Sonalert only after it has sounded. When the Sonalert has been silenced the button illuminates and a built-in reminder tone is emitted. Once the alarm condition is cleared, the silence function automatically resets so that Sonalert will sound again for the next alarm event. EMERGENCY RELEASE* (OPTION ER ) This option adds an alternate action illuminated button which, when pressed, illuminates and immediately releases all locks. Pressing the button again restores power to the locks. This option is used only with fail safe locks. ADDITIONAL MONITORING LIGHTS (OPTION AM ) This option adds a second LED (yellow) to each control zone. The LED illuminates from an external closure or voltage input and at the same time, a pulsing Sonalert sounds. The most common use for this option is to annunciate the start of exit delay for a fail safe lock in the NFPA 101 delayed exit installation. Other conditions, depending on the specific job, can also use this capability. SWITCH BYPASS KEYSWITCH* (OPTION KB1 OR KB2 ) The bypass keyswitch, when turned off, secures all zones and shunts out the control switches and emergency release button (if one has been supplied) so that the panel may be left unattended for a time. This option yields a Mortise cylinder type keyswitch with cylinder supplied. The suffix 1 is wired for fail safe locks. The suffix 2 is wired for fail secure locks. MOMENTARY CONTROL SWITCHES (OPTION MOM ) This option changes the lock control toggle switches from alternate (standard) to spring loaded momentary. It is used if the installation permits only momentary release of a lock from the panel. (Momentary switches are not illuminated.) HIGH VOLUME USE (OPTION HT ) The standard toggle switches are limited in life to about 30,000 operations. This is more than adequate for most installations where the panel switches are used sporadically but for high volume use, we suggest push button switches, with a life of about 200,000 operations. ON OFF AMBER = AUTHORIZED UNLOCK MAGLOCK ( ) MULTIPLE PANELS While this is not a specific option, multiple panels may be combined in different ways for control of the same group of doors. Contact the factory for the details. SPECIFICATIONS POWER: Panel available for 12 or 24 VDC operation. Unregulated voltage acceptable. CURRENT: Current drawn depends on version: 60 ma maximum per zone. SWITCHING CAPABILITY: Lock current is maximum 1.5 Amps with 3 Amp in rush acceptable. DESK MOUNT 4-8 ZONES: 4-1/2 H X 11 W X 10-1/4 D ZONES: 3-1/2 H x 15 W x 11-1/2 D WALL MOUNT 4 ZONES: 10 H X 10 W X 4 D 8-16 ZONES: 12 H x 12 W X 4 D ZONES: 16 H x 12 W x 6 D FLUSH MOUNT (Cutout) 4 ZONES: 10 H x 8 W x 4 D 8-16 ZONES: 12 H x 12 W x 4 D ZONES: 16 H x 12 W x 6 D RACK MOUNT 4-12 ZONES: 5-1/4 H X 19 W ZONES: 10-1/2 H X 19 W UL LISTED SA6635 AND BP7041 USA & Canada ORDERING INFORMATION The LCP Series part number calls out the description as follows: LCP-XX-YY-Mounting Options-System Options -XX Number of control zones -YY Panel voltage (12 or 24 VDC) MOUNTING OPTIONS (Consult factory for more than 24 zones) D - Desk top cabinet F - Flush mount plate with back box R - 19 Rack panel face mounting W- NEMA-1 locked wall mount SYSTEM OPTIONS AM - Additional set of indicators ER - Emergency all release HT - High volume push button switches KB1- Keyswitch control bypass with cylinder (fail safe locks) KB2- Keyswitch control bypass with cylinder (fail secure locks) MOM - Momentary control switches SLR - Silence latch with recurrent reminder signal EXAMPLE: Part # LCP W-SLR would be a 16 zone, 12 VDC Wall mount panel with Silence Latch. LCP Minimum 4 zones (maximum 24 zones) per four (4) zones: $ Mounting Option Charges D Desk top desk cabinet NO CHARGE F Flush mount plate with back box mounting $ R 19" Rack panel face mounting $ W NEMA-1 locked wall mount cabinet $ System Option Charges AM Additional set of monitoring lights (per four zones) $ ER Emergency all release (fail safe locks only) $ HT Heavy duty push button switches (per four zones) $ KB1 Key switch control bypass (fail safe locks) w/cylinder $ KB2 Key switch control bypass (fail secure locks) w/cylinder $ MOM Momentary control switches (alternate is standard) NONE SLR Silence latch with recurrent reminder signal $ ISO 9001 World Quality Standard A5066

43 An ASSA ABLOY Group company EXIT DELAY SYSTEMS EXIT DELAY SYSTEMS Configure A Flexible, Modular, UL Listed Exit Control System That Exceeds All Code Requirements! System components sold separately. 43 EXD OVERVIEW Exit delay systems secure exterior doors electronically while permitting routine, delayed egress from within. They fully comply with NFPA Life Safety Code 101 and all US/Canada model codes. A standard 15 or 30 second delay is offered, providing sufficient time for alerting personnel to a breach of safety or security. COMMON APPLICATIONS Exit delay systems are used to fight risk of loss by theft. Typical installation sites include retail stores, museums, libraries, computer and business technology centers. Without exit delay protection, a thief can move stolen goods through a nearby exit door, escaping undetected before countermeasures are taken. But exit delay forces a thief to wait by the door, enduring a 15 or 30 second alarm blast, sufficient time for his apprehension. Hospitals and nursing homes responsible for patient safety employ exit delay in denying egress to individuals under their supervision. Attempts at unauthorized exit by those suffering Alzheimer s, psychosis or disorientation are easily checked by an exit delay period, canceling significant liability threat from patient endangerment. Securitron exit delay systems are compatible with all access control equipment, and include powerful door control features that exceed code minimums, rendering unparalleled levels of security, safety and utility. These modular systems incorporate individually selected components suited to both physical and functional installation requirements. BUILT AROUND THE INCOMPARABLE MAGNALOCK FAMILY Securitron s MAGNALOCK, the world s finest electromagnetic lock, is the core component of our exit delay systems. Magnalocks secure doors with There s a Magnalock for ANY Application electromagnetic power that defies attempts at forced entry. And with nothing to jam, no-moving-parts reliability produces constant perfect release. Choose from the full range of Magnalock models 32, 62 or 82, 34, 34R and SAM the Shear Aligning Magnalock, and select options designed to meet specific installation or application demands. Be sure to consider Senstat, our patented lock sensing capability that reports a Magnalock s secure status to the control system. 43

44 44 EXIT DELAY SYSTEMS THE INITIATION DEVICE: KEY TO SYSTEM ACTIVATION Securitron offers a range of devices to initiate exit delay. To select one that s appropriate, first determine if your system will include electronic access control. MXD: INNOVATIVE DOOR MOVEMENT EXIT DELAY MAGLOCK ( ) SB-MXD: COMPACT DOOR MOVEMENT EXIT DELAY For applications where threat of tampering is a minor concern, we suggest the SB-MXD, combining our unique spring-loaded sex bolt with a separately mounted, concealed door position switch for system initiation. The inconspicuous SB- MXD also consumes less door frame space. LM SERIES LATCH MONITOR SB-MXD s door position switch & spring-loaded sex bolt Fully installed MXD (Closer not included) When access control is not required, we recommend our patented MXD door movement exit delay package. The MXD s attractive stainless steel housing conceals proximity sensing switches together with any standard Magnalock (sold separately). Initiation occurs when the door is pushed roughly an inch permitted by MXD s exclusive spring-loaded sex bolt but the door still remains locked. MXD installation requires no alteration or replacement of existing fire rated or non-fire rated latching hardware. Best of all, false triggering is eliminated by the ample 1 inch door movement. And fully sealed construction makes the MXD virtually tamper proof! LMD series latch monitor MXD s rugged stainless steel construction is completely weatherproof Where mortise hardware is present, wiring to the strike is accessible and tampering is a minor concern, we offer the LM series latch monitor for initiation. The latch monitor mounts behind the strike in the jamb and initiates delay by detecting latch withdrawal during an exit attempt. THE AMAZING TOUCH SENSE BAR Model TSB-3 series 44 MXD s tamper proof housing & concealed proximity switching MXD s unique spring-loaded sex bolt allows 1 movement When an application includes electronic access control on any magnetically locked, non-fire rated door where latching is not required by code, we recommend Securitron s Touch Sense Bar, model TSB-3. The TSB-3 operates electronically by detecting touch even through gloves and includes a redundant, manual backup button switch for added safety. The TSB-3 features a sleek, clear or black aluminum finish, and the reliability of no moving parts. For fire rated doors, we employ switch equipped panic bars with appropriate entry trim. Mortise, vertical rod or rim latching is available, as are a variety of finishes.

45 An ASSA ABLOY Group company EXIT DELAY LOGIC TIMERS XDT-12, XDT-24 and FA-XDT Model XDT series showing BA enclosure The brains of Securitron exit delay systems are dependable XDT logic timers, available in 12 or 24 volt versions. These microprocessorbased timers have selectable operating modes to comply with any exit delay building code rules mandated by NFPA, UBC, BOCA, SBC or the National Building Code of Canada. Exit delay operation is defined as an attempt to open a door by pushing the exit hardware, triggering a local alarm and nuisance delay of 0, 1, 2, or 3 seconds. If the exit attempt is terminated before the nuisance delay expires, the alarm stops and event concludes. If the attempt persists beyond the nuisance delay period, an irrevocable release delay period of 15 or 30 seconds will begin, after which the door will release, and remain released until reset by an external switch. If the fire alarm activates, all doors release immediately. Code stipulations vary, but XDT logic timers meet all requirements, including the BOCA 30 second relock function. Nuisance delay and release times are digitally set on XDT models via precise dip switches, far superior to analog pots. XDT boards are supplied alone or enclosure mounted with Sonalerts. The BA-XDT is a surface mount box. The FA-XDT is a flush mount plate, and the FAK-XDT adds a keyswitch on the plate. TWELVE DURABLE BPS POWER SUPPLY MODELS Power exit delay systems with solid BPS series power supplies, renowned for lasting performance. All facility doors should operate from a single power supply located near the fire alarm system, to meet the code requirement that power is cut to all doors during a fire alarm event. Model BPS series BPS power supplies are available in 12 or 24 volts DC, with capacities QUALITY RESET KEYSWITCHES EXIT DELAY SYSTEMS of 1 15 amps at 12 volts, or 1 10 amps at 24 volts. All models are compatible with battery backup packs for seamless, automatic operation during power interruption, where codes allow. Model MK Series Most codes require a reset or relock keyswitch at the door. Securitron s sturdy MK keyswitch provides smooth quickswitching action, and is compatible with existing facility keying. Furnished without a cylinder, the MK will accept any 1-1/4" or 1-1/ 8" mortise cylinder. Optionally, the MK can include a second switch to perform authorized, nonalarmed exit by a simple key turn in the opposite direction, which releases the door for 5 seconds. The MK is supplied on a single gang or narrow stile plate and includes a bi-color LED. At the user s option, a normally closed door switch can be used for reset. The use of a door switch can meet a specific code requirement or achieve automatic relocking when the door is used. LOCK CONTROL PANELS FOR REMOTE MONITORING Model LCP Series Securitron LCP lock control panels provide optimum central door control and monitoring of our exit delay systems, are UL listed as system components, and can be ordered with any number of zones configured in multiples of 4. Choose from an executive desk panel with walnut sides; or functional wall, flush or rack mounted enclosures. If an application doesn t require a lock control panel, remote exit delay monitoring can still be accomplished by conventional alarm panels through XDT logic timer signaling via dry contacts. Because Lock Control Panels are specially ordered and custom manufactured, MagnaCare coverage cannot apply. But LCPs are covered by a standard 2 year warranty on electronics. ALARM & BYPASS FUNCTIONS Exit delay systems provide comprehensive monitoring of door conditions. Two separate SPDT relays on the XDT board indicate system status at all times. A local alarm relay pulses during the nuisance delay, and then operates continually through the release delay. When a door releases at the end of the release delay period, this relay resets automatically. A remote alarm relay operates from nuisance delay termination 45 45

46 46 EXIT DELAY SYSTEMS MAGLOCK ( ) until the door is relocked. This second relay also features power sensing to detect a failed XDT board, or reduction of input voltage below 70% of nominal. A Senstat Magnalock can report to the XDT logic timer s lock status input and operate the remote alarm relay whenever the Magnalock is not registering secure. A 5 second delay starts prior to signaling, so a door authorized for release is allowed to swing shut. The lock status input can also connect to an independent door switch. Integration with access control is simplified by the XDT s bypass input capability. When an external keyswitch, digital keypad or card reader closes on this input, the door is released 5 seconds for authorized entry or exit without alarm. MULTI-MODE OPERATION Many applications require that an exit delay is functional only during specific parts of the day, or week. The XDT logic timer provides connections for a time clock or manual switch to alter the exit control operation of a door. Alternative control functions from standard exit delay are: Door fully released Door secured from the exterior but immediate, non-alarmed egress available from the interior Door locked down no entry or exit Magnalock won t release at the end of the release delay period, but remains energized until the exit device is pressed for immediate exit a variation providing enhanced exterior security, while meeting egress safety code requirements. System Options Please contact the factory for authorized entry/exit controls and LCP lock control panel configurations. Certifications UL Listed: #SA6635; Underwriters Laboratories of Canada: CMS140 & SA6635; NYC MEA: E & E; California State Fire Marshall: Part Number Description Price XDT-12 Exit Delay Timer 12VDC $ XDT-24 Exit Delay Timer 24VDC $ BA-XDT-12 Exit Delay Timer In Box W/ Key & Sonalert - 12VDC $ BA-XDT-24 Exit Delay Timer In Box W/ Key & Sonalert - 24VDC $ FA-XDT-12 Exit Delay Timer Flush Mt w/audible+door Label 12VDC $ FA-XDT-24 Exit Delay Timer Flush Mt w/audible+door Label 24VDC $ MXD-32 Exit Delay Initiate Door Movement Model 32 Series $ MXD-62 Exit Delay Initiate Door Movement Model 62 Series $ SB-MXD Door Movement Sex Bolt Kit $ EXD-1L Label & Docs. For EXD-1 $20.00 ISO 9001 World Quality Standard A5066 Multi-Mode capability is yet another example of the power and scope in Securitron s approach to state of the art smart security beyond code minimums, reaching the ultimate in safety and reliability. ORDERING INFORMATION Individual components are sold separately, and should be selected from Securitron s price list. Model 32, 34, 62, 82 or SAM Series Magnalocks Double doors will require 2 locks. Please note: Model 82 will not operate with an MXD initiation system; but will operate with an SB-MXD initiation system. MXD Door Movement Initiation Package Select MXD-32 or MXD-62 in correlation to the Magnalock utilized. SAM or 34 cannot be used with MXD OR SB-MXD Initiation. Latch Monitor Initiation Device Select LMS-1 for a 2 3/4 ANSI strike; or LML-1 for a 4 7/8 ANSI strike. TSB-3 Series Touch Sense Bar Application on non-fire rated doors only. Double doors will require 2 bars. Please contact the factory for fire rated exit products. XDT Series Timer Request BA-XDT for enclosed timer with Sonalert. FA-XDT for flush mounted plate. FAK-XDT incorporates a keyswitch. EXD-1L is a door warning sign, supplied with BA-XDT, not with XDT. MK Series Keyswitch Please contact the factory if a door position switch is required. BPS Series Power Supplies Determine correct power supply capacity to operate all facility doors.

47 An ASSA ABLOY Group company PRODUCT LISTING BY ALPHA PART NUMBER 47 Part Number Description Price Page # Part Number Description Price Page # AKG Adhesive Kit For Glass Hdwr. $ DC-32BK Dress Cover Black Anodized Model 32 $ ASB-32BK Alum. Spacer Bracket Model 32 Black $ DC-32BP Dress Cover Brass Polished Model 32 $ ASB-32CL Alum. Spacer Bracket Model 32 Clear $ DC-32CL Dress Cover Clear Anodized Model 32 $ ASB-62BK Alum. Spacer Bracket Model 62 Black $ DC-32SP Dress Cover Stainless Polished Model 32 $ ASB-62CL Alum. Spacer Bracket Model 62 Clear $ DC-62BK Dress Cover Black Anodized Model 62 $ ASB-82BK Alum. Spacer Bracket Model 82 Black $ DC-62BP Dress Cover Brass Polished Model 62 $ ASB-82CL Alum. Spacer Bracket Model 82 Clear $ DC-62CL Dress Cover Clear Anodized Model 62 $ B-12-4 Battery 12 VDC 4 Amp Hour $ DC-62SP Dress Cover Stainless Polished Model 62 $ B-24-4 Battery 24VDC 4 Amp Hour $ DC-82BK Dress Cover Black Anodized Model 82 $ BACS Power Supply 12VAC - 20A $ DC-82BP Dress Cover Brass Polished Model 82 $ BACS Power Supply 24VAC - 10A $ DC-82CL Dress Cover Clear Anodized Model 82 $ BACSH Power Supply 12VAC - 20A 220VAC $ DC-82SP Dress Cover Stainless Polished Model 82 $ BACSH Power Supply 24VAC - 10A 220VAC $ DDC-32BK Dbl. Dress Cover Black Anodized Model 32 $ BA-XDT-12 Exit Delay Timer In Box W/ Key & Sonalert - 12VDC $ DDC-32CL Dbl. Dress Cover Clear Anodized Model 32 $ BA-XDT-24 Exit Delay Timer In Box W/ Key & Sonalert - 24VDC $ DDC-62BK Dbl. Dress Cover Black Anodized Model 62 $ BPS-12-1 Power Supply 12VDC-1 Amp $ DDC-62CL Dbl. Dress Cover Clear Anodized Model 62 $ BPS Power Supply 12VDC-15 Amp $ DDC-82BK Dbl. Dress Cover Black Anodized Model 82 $ BPS-12-3 Power Supply 12VDC-3 Amp $ DDC-82CL Dbl. Dress Cover Clear Anodized Model 82 $ BPS Power Supply 12VDC-4.5 Amp $ DK-11 Digital Keypad System $ BPS-12-6 Power Supply 12VDC-6 Amp $ DK-11W Digital Keypad System Wiegand Output $ BPS-12-9 Power Supply 12VDC-9 Amp $ DK-16 Digital Keypad System Single Gang $ BPS-24-1 Power Supply 24VDC-1 Amp $ DK-16P Digital Keypad Single Gang $ BPS Power Supply 24VDC-10 Amp $ DK-16W Digital Keypad System Single Gang Wiegand Output $ BPS-24-2 Power Supply 24VDC-2 Amp $ DK-16XB DK-16 With Expansion Circuit Board Single Gang $ BPS-24-3 Power Supply 24VDC-3 Amp $ DK-26BK Digital Keypad System Narrow Stile Black $ BPS-24-4 Power Supply 24VDC-4 Amp $ DK-26BKXB DK-26 With Expansion Circuit Board Satin Black $ BPS-24-6 Power Supply 24VDC-6 Amp $ DK-26PBK Digital Keypad Narrow Stile Black $ BPSH-12-1 Power Supply 12VDC-1 Amp 220VAC $ DK-26PSS Digital Keypad Narrow Stile Stainless Steel $ BPSH Power Supply 12VDC-15 Amp 220VAC $ DK-26SS Digital Keypad System Narrow Stile Stainless Steel $ BPSH-12-3 Power Supply 12VDC-3 Amp 220VAC $ DK-26SSXB DK-26 W/ Expansion Circuit Board Stainless Steel $ BPSH Power Supply 12VDC-4.5 Amp 220VAC $ DK-26WBK Digital Keypad System Narrow Stile Black Wiegand Output $ BPSH-12-6 Power Supply 12VDC-6 Amp 220VAC $ DK-26WSS Digital Keypad System Narrow Stile Wiegand Output $ BPSH-12-9 Power Supply 12VDC-9 Amp 220VAC $ DK-CPSS Cover Plate For DK-26 Keypad Mounting Satin Stainless 3x8 $ BPSH-24-1 Power Supply 24VDC-1 AMP 220VAC $ DK-SBK Spy Shield for DK-26 Black $ BPSH Power Supply 24VDC-10 Amp 220VAC $ DK-SSS Spy Shield for DK-26 Stainless $ BPSH-24-2 Power Supply 24VDC-2 Amp 220VAC $ DK-WRI Digital Keypad Wiegand Output Circuit Board Only $ BPSH-24-3 Power Supply 24VDC-3 Amp 220VAC $ DK-XB DK-16/26 Expansion Circuit Board Upgrade Kit $ BPSH-24-4 Power Supply 24VDC-4 Amp 220VAC $ DM lb. 62 Double, Dual Voltage $ BPSH-24-6 Power Supply 24VDC-6 Amp 220VAC $ DM62SC 1200 lb. 62 Double, Dual Voltage Senstat Form C $ BR-7 Bridge Rectifier 7A $ DPA-12 Door Prop Alarm 12VDC $ CAB-6 16ft 6 Conductor Cable With Connector $ DPA-24 Door Prop Alarm 24VDC $ CCB-8-12 Control Board 12VDC 8 Fused Outputs $ DT-7 Prime Time 7 Day Digital Timer $ CCB-8-24 Control Board 24VDC 8 Fused Outputs $ EASB-34 Sex Bolt Energy Absorbing Model 34 $ CWB-32BK Concrete/Wood Bracket Model 32 Black 1/2" $ EASB-62 Sex Bolt Energy Absorbing Model 62 $ CWB-32CL Concrete/Wood Bracket Model 32 Clear 1/2" $ EASB-82 Sex Bolt Energy Absorbing Model 82 $ CWB-62BK Concrete/Wood Bracket Model 62 Black 1/2" $ EEB2 Emerency Exit Button Single Gang With 30 Second Timer $ CWB-62CL Concrete/Wood Bracket Model 62 Clear 1/2" $ EEB2 Emergency Exit Button Single Gang With 30 Second Timer $ CWB-82BK Concrete/Wood Bracket Model 82 Black 1/2" $ EEB3N Emergency Exit Button Narrow Stile With 30 Second Timer $ CWB-82CL Concrete/Wood Bracket Model 82 Clear 1/2" $ EEB3N Emergency Exit Button Narrow Stile With 30 Second Timer $

48 48 PRODUCT LISTING BY ALPHA PART NUMBER MAGLOCK ( ) Part Number Description Price Page # Part Number Description Price Page # EH-40 Electrified Hinge 4.5" x 4" Stainless 5 Wire $ M lb. 24VDC $ EH-45 Electrified Hinge 4.5"x4.5" Stainless 5 Wire $ M32F lb. 12VDC Face Mount $ EPT Electrical Power Transfer Standard Version $ M32F lb. 24VDC Face Mount $ EPTL Electrical Power Transfer Long Version $ M32SC lb. 12VDC Senstat Form C $ EXD-1L Label & Docs. For EXD-1 $ M32SC lb. 24VDC Senstat Form C $ FA-XDT-12 Exit Delay Timer Flush Mt w/audible+door Label 12VDC $ M32SCF lb. 12VDC Face Mount Senstat form C $ FA-XDT-24 Exit Delay Timer Flush Mt w/audible+door Label 24VDC $ M32SCF lb. 24VDC Face Mount Senstat form C $ GDB Glass Door Bracket $ M lb. Dual Voltage $ HEB-3BK Header Ext. Bracket 3" x 3" x 8" Black $ M34F 600 lb. Dual Voltage Face Mount $ HEB-3CL Header Ext. Bracket 3" x 3" x 8" Clear $ M34R 600 lb. Recessed Dual Voltage $ HEB-3G Header Ext. Braket 3" x 3" x 8" Glass Door $ M34RSC 600 lb. Recessed Dual Voltage Senstat Form C $ HEB82-3BK Header Ext. Bracket 3" x 3" x 12" Black $ M34SC 600 lb. Dual Voltage Senstat $ HEB82-3CL Header Ext. Bracket 3" x 3" x 12" Clear $ M34SCF 600 lb. Dual Voltage Face Mount Senstat $ HHD-32 Full Length Housing Model 32 Dbl. Horizontal $ M lb. Dual Voltage $ HHD-62 Full Length Housing Model 62 Dbl. Horizontal $ M62F 1200 lb. Dual Voltage Face Mount $ HHD-82 Full Length Housing Model 82 Dbl. Horizontal $ M62FG 1200 lb. Dual Voltage Face Mount Conduit Fitting $ HHSL-32 Full Length Housing Model 32 Single Lefthand Reverse $ M62G 1200 lb. Dual Voltage Conduit Fitting $ HHSL-62 Full Length Housing Model 62 Single Lefthand Reverse $ M62G-OS 1200 lb. Dual Voltage Conduit Fitting w/offset Strike $ HHSL-82 Full Length Housing Model 82 Single Lefthand Reverse $ M62G-SS 1200 lb. Dual Voltage Conduit Fitting w/split Strike $ HHSR-32 Full Length Housing Model 32 Single Righthand Reverse $ M62-OS 1200 lb. Dual Voltage w/offset Strike $ HHSR-62 Full Length Housing Model 62 Single Righthand Reverse $ M62SC 1200 lb. Dual Voltage Senstat $ HHSR-82 Full Length Housing Model 82 Single Righthand Reverse $ M62SCF 1200 lb. Dual Voltage Senstat Face Mount $ HVD-32 Full Length Housing Model 32 Dbl. Vertical $ M62SCFG 1200 lb. Dual Voltage Senstat Face Mount Conduit $ HVD-62 Full Length Housing Model 62 Dbl. Vertical $ M62SCG 1200 lb. Dual Voltage Senstat Conduit $ HVD-82 Full Length Housing Model 82 Dbl. Vertical $ M62SCG-OS 1200 lb. Dual Voltage Senstat Conduit/Offset Strike $ KP1 Tubular Keyswitch Momentary Single Gang $ M62SCG-SS 1200 lb. Dual Voltage Senstat Conduit/Split Strike $ KP1A Tubular Keyswitch Alternate Single Gang $ M62SC-OS 1200 lb. Dual Voltage Senstat w/offset Strike $ KP1AN Tubular Keyswitch Alternate Narrow Stile $ M62SC-SS 1200 lb. Dual Voltage Senstat w/split Strike $ KP1N Tubular Keyswitch Momentary Narrow Stile $ M62-SS 1200 lb. Dual Voltage w/split Strike $ LCP SERIES CONTACT FACTORY FOR EXACT QUOTATION 41 M82SC 1800 lb. Dual Voltage Senstat $ LCP Minimum 4 zones (maximum 24 zones) per four (4) zones: $ M82SCF 1800 lb. Dual Voltage Senstat Face Mount $ Mounting Option Charges M82SCFG 1800 lb. Dual Voltage Senstat Face Mount Conduit $ D Desk top desk cabinet NO CHARGE 41 M82SCG 1800 lb. Dual Voltage Senstat Conduit Fitting $ F Flush mount plate with back box mounting $ M82SCG-OS 1800 lb. Dual Voltage Senstat Conduit/Offset Strike $ R 19" Rack panel face mounting $ M82SCG-SS 1800 lb. Dual Voltage Senstat Conduit/Split Strike $ W NEMA-1 locked wall mount cabinet $ M82SC-OS 1800 lb. Dual Voltage Senstat w/offset Strike $ System Option Charges M82SC-SS 1800 lb. Dual Voltage Senstat w/split Strike $ AM Additional set of monitoring lights (per four zones) $ MCL-24 Magnetic Cabinet Lock 24VDC $ ER Emergency all release (fail safe locks only) $ MK Mortise Keyswitch Momentary Single Gang $ HT Heavy duty push button switches (per four zones) $ MK2 Mortise Keyswitch Momentary DPDT Single Gang $ KB1 Key switch control bypass (fail safe locks) w/cylinder $ MKA Mortise Keyswitch Alternate Single Gang $ KB2 Key switch control bypass (fail secure locks) w/cylinder $ MKA2 Mortise Keyswitch Alternate DPDT Single Gang $ MOM Momentary control switches (alternate is standard) NONE 41 MKAN Mortise Keyswitch Alternate Narrow Stile $ SLR Silence latch with recurrent reminder signal $ MKAN2 Mortise Keyswitch Alternate DPDT Narrow Stile $ LMD-1 Latch Monitor For Aluminum Door Deadlock SPDT 3 Amp $ MKC Mortise Cylinder 1-1/8 Length 26D Keyway SC $ LML-1 Latch Monitor ANSI 4 7/8 SPDT 3 Amp $ MKC-KA Mortise Cylinder 1-1/8 Length 26D Keyway SC Keyed Alike $ LML-2 Latch Monitor ANSI 4 7/8 w/ Deadbolt SPDT 3 Amp $ MKN Mortise Keyswitch Momentary Narrow Stile $ LMS-1 Latch Monitor ANSI 2 3/4 SPDT 3 Amp $ MKN2 Mortise Keyswitch Momentary DPDT Narrow Stile $ M lb. 12VDC $ MKS Additional Switch Momentary For MK Series $

49 An ASSA ABLOY Group company PRODUCT LISTING BY ALPHA PART NUMBER 49 Part Number Description Price Page # Part Number Description Price Page # MKS2 Additional Switch Momentary DPDT For MK Series $ SCL-24 Solenoid Cabinet Lock 24VDC $ MKSA Additional Switch Alternate For MK Series $ SCLT Solenoid Cabinet Lock Installation Tool $ MKSA2 Additional Switch Alternate DPDT For MK Series $ SFP-1/2BK Stop Filler Plate 1/2" x 1-1/4" x 8" Black $ MSS-1 High Security Switch Surface Mount $ SFP-1/2CL Stop Filler Plate 1/2" x 1-1/4" x 8" Clear $ MSS-1C High Security Switch Concealed $ SFP-1/4BK Stop Filler Plate 1/4" x 1-1/4" x 8" Black $ MSS-1C-RT High Security Switch Concealed Remote Test $ SFP-1/4CL Stop Filler Plate 1/4" x 1-1/4" x 8" Clear $ MSS-1G High Security Switch Surface Mount $ SFP-3/8BK Stop Filler Plate 3/8" x 1-1/4" x 8" Black $ MSS-1G-RT High Security Switch Surface Mount Remote Test $ SFP-3/8CL Stop Filler Plate 3/8" x 1-1/4" x 8" Clear $ MSS-1-RT High Security Switch Surface Mount with Remote Test $ SFP-5/8BK Stop Filler Plate 5/8" x 1-1/4" x 8" Black $ MXD-32 Exit Delay Initiate Door Movement Model 32 Series $ SFP-5/8CL Stop Filler Plate 5/8" x 1-1/4" x 8" Clear $ MXD-62 Exit Delay Initiate Door Movement Model 62 Series $ SFP82-1/2BK Stop Filler Plate 1/2" x 1-1/4" x 12" Black $ PB Push Button 1-1/2 Round Momentary Single Gang $ SFP82-1/2CL Stop Filler Plate 1/2" x 1-1/4" x 12" Clear $ PB2 Push Button 2" Square Momentary SPDT Single Gang $ SFP82-1/4BK Stop Filler Plate 1/4" x 1-1/4" x 12" Black $ PB2E Push Button 2" Square Momentary Economy Single Gang $ SFP82-1/4CL Stop Filler Plate 1/4" x 1-1/4" x 12" Clear $ PB2EH Push Button 2" Square Momentary Economy w/handicap $ SFP82-3/8BK Stop Filler Plate 3/8" x 1-1/4" x 12" Black $ PB2H Push Button 2" Square Momentary With Handicap $ SFP82-3/8CL Stop Filler Plate 3/8" x 1-1/4" x 12" Clear $ PB3 Push Button 3/4" Rectangle Momentary Single Gang $ SFP82-5/8BK Stop Filler Plate 5/8" x 1-1/4" x 12" Black $ PB3A Push Button 3/4" Rectangle Alternate Single Gang $ SFP82-5/8CL Stop Filler Plate 5/8" x 1-1/4" x 12" Clear $ PB3AN Push Button 3/4" Rectangle Alternate Narrow Stile $ SMLS Housing Surface Mount Lock / Shear $ PB3E Push Button 3/4" Rectangle Momentary Economy Single Gang $ SMSS Housing Surface Mount Strike / Shear $ PB3EA Push Button 3/4" Rectangle Alternate Economy Single Gang $ SP-1 Touch Sensor Plate $ PB3EAN Push Button 3/4" Rectangle Alternate Economy Narrow Stile $ SP-1L Sensor Plate Label $ PB3EAR Push Button Remote Alternate Economy Surface Mount $ SP-1LH Label Touch Plate Handicap Decal Blue Vinyl $ PB3EN Push Button 3/4" Rectangle Momentary Economy Narrow Stile $ TCP-BK Cover Plates For Touch Bar Mounting Set of 2-Satin Black $ PB3ER Push Button Remote Momentary Economy Surface Mount $ TCP-CL Cover Plates For Touch Bar Mounting Set Of 2 Clear $ PB3N Push Button 3/4" Rectangle Mom Narrow Stile $ TM-2 Time Master II Multi-Function Timer DPDT 12/24VDC $ PB4 Push Button 1" Stainless Steel Momentary Single Gang $ TM-9 Time Mate 2-36 Second SPDT Timer 12/24VDC $ PB4-2 Push Button 1" Stainless Steel Momentary DPDT Single Gang $ TP-12-3 Transformer Plug-In 12VAC-3 Amp $ PB4A-2 Push Button 1" Stainless Steel Alternate DPDT Single Gang $ TP-24-2 Transformer Plug-In 24VAC-1.5 Amp $ PB4AN-2 Push Button 1" Stainless Steel AlternateDPDT Narrow Stile $ TSB-3BK Touch Sense Bar Black Anodized 36in. $ PB4N Push Button 1" Stainless Steel Momentary Narrow Stile $ TSB-3BK-42 Touch Sense Bar Black Anodized 42in. $ PB4N-2 Push Button 1" Stainless Steel Momentary DPDT NarrowStile $ TSB-3BK-48 Touch Sense Bar Black Anodized 48in. $ PB5 Push Button 2" Diameter Red Momentary DPDT-S/G With Light $ TSB-3CL Touch Sense Bar Clear Anodized 36in. $ PB5E Push Button 2" Round Red Momentary DPDT-S/G Without Lights $ TSB-3CL-42 Touch Sense Bar Clear Anodized 42in. $ PBA Push Button 1-1/2 Round Alternate Single Gang $ TSB-3CL-48 Touch Sense Bar Clear Anodized 48in. $ PM-12-1 Plug-In Power Module 12VDC-1 Amp w/ Charger & Enclosure $ TSB-C TSB Door Cord With Gray & Black Caps 18" Cord $ PM-24-1 Plug-In Power Module 24VDC-1 Amp w/ Charger &Enclosure $ TSB-C Door Cord w/gray & Black Caps 18" Cord $ PSM-12 Power Supply Monitor 12VDC $ TSH-BK Touch Sense Handle Push-Pull Satin Black Alum. $ PSM-24 Power Supply Monitor 24VDC $ TSH-CL Touch Sense Handle Push-Pull Clear Alum. $ PSP-12 Power Supply Plug-In 12VDC ma $ UFP UnLatch Filler Plate Electric Strike Retrofit (Unlatch) $30.00 PSP-24 Power Supply Plug-In 24VDC ma $ UHB-82BK Univ. Header Bracket Black Anodized Model 82 $ PZ1 Piezo Single Gang $ UHB-82CL Univ. Header Bracket Clear Anodized Model 82 $ RB-4-12 Relay Board-12VDC 4 x DPDT-1 Amp $ UHB-BK Univ. Header Bracket Black Anodized 1"x1-1/2" x 10" $ RB-4-24 Relay Board-24VDC 4 x DPDT-1 Amp $ UHB-CL Univ. Header Bracket Cl. Anodized 1"x1-1/2" x 10" $ RLP-12 Relay Logic Pack 12VDC $ UMB-34CL Univ. Bracket Model 34 Clear $30.00 RLP-24 Relay Logic Pack 24VDC $ UNL-12 UnLatch For Cylindrical Locks 12VDC $ SAM Shear Aligning Mag Dual Voltage $ UNL-24 UnLatch For Cylindrical Locks 24VDC $ SAM SC Shear Aligning Mag Dual Voltage Form-C Senstat $ WCC Weather Cover Clear Single Gang $ SB-MXD Door Movement Sex Bolt Kit $ XDT-12 Exit Delay Timer 12VDC $

50 50 ALPHA LISTING (cont d.)/contact US MAGLOCK ( ) Part Number Description Price Page # XDT-12 Exit Delay Timer 12VDC $ XDT-24 Exit Delay Timer 24VDC $ XDT-24 Exit Delay Timer 24VDC $ XM1 Exit Delay Package with XMS and EEB2 Timer $ XM1N Exit Delay Package with XMS and EEB3N Timer $ XMS Exit Motion Sensor $ Z-32BK Z-Bracket Black Anodized Model 32 $ Z-32CL Z-Bracket Clear Anodized Model-32 $ Z-32SS Z-Bracket Stainless Steel Model 32 $ Z-34CL Z-Bracket Clear Anodized Model 34 $84.00 Z-34SS Z-Bracket Stainless Steel Model 34 $84.00 Z-34BK Z-Bracket Black Anodized Model 34 $ Z-62BK Z-Bracket Black Anodized Model 62 $ Z-62CL Z-Bracket Clear Anodized Model 62 $ Z-62SS Z-Bracket Stainless Steel Model 62 $ Z-82BK Z-Bracket Black Anodized Model 82 $ Z-82CL Z-Bracket Clear Anodized Model 82 $ Z-82SS Z-Bracket Stainless Steel Model 82 $ State Of The Art Smart! SECURITRON MAGNALOCK CORPORATION 550 Vista Blvd. Sparks, NV Tel: (775) (800) MAGLOCK ( ) Fax: (775) Copyright, Securitron Magnalock Corp., All rights reserved. World Leader in Electronic Locking Products and Systems, Securitron is Peerless in Quality, Innovation and Customer Satisfaction. The ASSA ABLOY Group is the world s leading manufacturer of locks and associated products. We develop, produce and market mechanical, industrial, electromechanical and electronic locks as well as hotel locks, fittings, exit devices and accessories. Although we are the world leader in the lock business, our experience of local requirements, business arragements and distribution patterns is equally crucial to our success. Our firm ambition is to ensure security, safety and convenience for lock users all over the world. WORLD HEADQUARTERS

51 An ASSA ABLOY Group company STATE OF THE ART SMART! 51

52 MagnaCare tm Limited Lifetime Warranty SECURITRON MAGNALOCK CORPORATION warrants that it will replace at customer s request, at any time for any reason, products manufactured and branded by SECURITRON. SECURITRON will use its best efforts to ship a replacement product by next day air freight at no cost to the customer within 24 hours of SECURITRON s receipt of the product from customer. If the customer has an account with SECURITRON or a valid credit card, the customer may order an advance replacement product, whereby SECURITRON will charge the customer s account for the price of the product plus next day air freight, and will credit back to the customer the full amount of the charge, including outbound freight, upon SECURITRON s receipt of the original product from the customer.securitron s sole and exclusive liability, and customer s sole remedy, is limited to the replacement of the SECURITRON product when delivered to SECURITRON s facility (freight and insurance charges prepaid by customer). The replacement, at SECURITRON s sole option, may be the identical item or a newer unit which serves as a functional replacement. In the event that the product type has become obsolete in SECURITRON s product line, this MAGNACARE warranty will not apply. This MAGNACARE warranty also does not apply to custom, built to order, or non-catalog items, items made by others (such as batteries), returns for payment, distributor stock reductions, returns seeking replacement with anything other than the identical product, or products installed outside of the United States or Canada. This MAGNACARE warranty also does not apply to removal or installation costs. SECURITRON will not be liable to the purchaser, the customer or anyone else for incidental or consequential damages arising from any defect in, or malfunction of, its products. SECURITRON does not assume any responsibility for damage or injury to person or property due to improper care, storage, handling, abuse, misuse, or an act of God. EXCEPT AS STATED ABOVE, SECURITRON MAKES NO WARRANTIES, EITHER EXPRESS OR IMPLIED, AS TO ANY MATTER WHATSOEVER, INCLUDING WITHOUT LIMITATION THE CONDITION OF ITS PRODUCTS, THEIR MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE REV. A