4.3 MSK SWITCH BOX MSK (SIZE I) FEATURES ADVANTAGES

Size: px

Start display at page:

Download "4.3 MSK SWITCH BOX MSK (SIZE I) FEATURES ADVANTAGES"

Aleesha Brooke Hill
5 years ago
Views:

SWITCH BOX MSK (SIZE I) FEATURES - A compact, robust switch box to be mounted on pneumatic actuators - Position response via integrated micro limit switches - Integrated terminal Strip - The micro

1 SWITCH BOX MSK (SIZE I) FEATURES - A compact, robust switch box to be mounted on pneumatic actuators - Position response via integrated micro limit switches - Integrated terminal Strip - The micro limit switches are adjusted in open and close position of the valve - Body: Aluminium (Powder coated) - Protection Class: IP 65 acc. to DIN Micro Switches: Marquardt Type M Voltage: V DC - Ambient Temperature: -25 C to +70 C - Constant Current: 200 ma - Screwed Cable Gland: 1 x PG 13,5 (1 x PG 13,5 optional) 1 x PG 9 ADVANTAGES 1) Captive Screws to simplify adjustments on site 2) Wiring Diagram within the cover ) Integrated Seal Protection Class IP 65 4) Plastic brackets to keep the cover in positon 5) Integrated terminal strip 4 5 MSK

SWITCH BOX NSK (SIZE I) FEATURES - A compact, robust switch box to be mounted on pneumatic actuators - Position response via integrated proximity switches - Integrated terminal

to DIN 40050 - Voltage: 10-60 V DC - Ambient Temperature: -25 C to +70 C - Constant Current: 200 ma - Screwed Cable Gland: 1 x PG 13,5 (1 x PG 13,5 optional) 1 x PG 9 ADVANTAGES 1)

2 SWITCH BOX NSK (SIZE I) FEATURES - A compact, robust switch box to be mounted on pneumatic actuators - Position response via integrated proximity switches - Integrated terminal Strip - The proximity switches are adjusted in open and close position of the valve - Body: Aluminium (Powder coated) - Protection Class: IP 65 acc. to DIN Voltage: V DC - Ambient Temperature: -25 C to +70 C - Constant Current: 200 ma - Screwed Cable Gland: 1 x PG 13,5 (1 x PG 13,5 optional) 1 x PG 9 ADVANTAGES 1) Captive Screws to simplify adjustments on site 2) Wiring Diagram within the cover ) Integrated Seal Protection Class IP 65 4) Plastic brackets to keep the cover in positon 5) Integrated terminal strip 4 5 NSK

SWITCH BOX MSK/NSK (SIZE II) Pneumatic Quarter Turn

II). Integrated mechanical limit switches.

Pilot solenoid valve for single acting pneumatic

Pneumatic quarter turn actuator (double acting) with

3 SWITCH BOX MSK/NSK (SIZE II) Pneumatic Quarter Turn Actuator (spring returned) with Switchbox MSK (Size II). Integrated mechanical limit switches. Support acc. to VDI/VDE Pilot solenoid valve for single acting pneumatic actuators. Pneumatic quarter turn actuator (double acting) with switch box NSK (Size II). Integrated proximity switches. Support acc. to VDI/VDE Compound coil pilot solenoid valve. Accessories

FOR AS-INTERFACE INSTALLATIONS 1 2 3 6 4 5 The pneumatic actuator shown here is ready for AS-Interface

(24V) 2) T5 box: Indicates the position to the 4) Connection Cable to control the pilot 6) Speed control block

solenoid valve speed rate for opening and closing FOR DIRECT MOUNTING Pneumtic quarter turn actuator (double

4 FOR AS-INTERFACE INSTALLATIONS The pneumatic actuator shown here is ready for AS-Interface applications: 1) Target Puck for position indication 3) Adaption for AS-Interface wiring 5) Pilot solenoid valve (24V) 2) T5 box: Indicates the position to the 4) Connection Cable to control the pilot 6) Speed control block for the adjustment of the control center. solenoid valve speed rate for opening and closing FOR DIRECT MOUNTING Pneumtic quarter turn actuator (double acting) with directly mounted proximity switches. Covering cap acc. to UVV (German Accident Prevention Rules). Support acc. to VDI/VDE post@ebro-armaturen.com PDF

ANALOG POSITIONER EP 100 The analog Positioner EP 100 with analog input 4... 20 ma is designed to operate pneumatic valve actuators.

The modular structure of this positioner series enables conversion from an analog to a digital or intelligent positioner by exchanging the electronics.

5 ANALOG POSITIONER EP 100 The analog Positioner EP 100 with analog input ma is designed to operate pneumatic valve actuators. It offers an easy adjustment by means of switches and potentiometers. The modular structure of this positioner series enables conversion from an analog to a digital or intelligent positioner by exchanging the electronics. TECHNICAL FEATURES Configuration by means of switches and potentiometers Load 300 Ohm Low air consumption Stroke 8 to 120 mm (0.3 to 4.7 inch) Angle range up to 95 Supply air pressure up to 6 bar (90 psig) Single or double acting Mechanical travel indicator Reverse polarity protection Attachment to stroke actuators directly or according to IEC 534 part 6 (NAMUR) Attachement to rotary actuators according to VDI/VDE 3845 Protection class IP 65 and NEMA 4X EXPLOSION PROTECTION: EEx ia IIC according to CENELEC or Inrinsic safety according to FM and CSA Integrated inductive limit switches, independent of device electronics ACCESSORIES e.g.: Gauge attachement for supply air and outputs Booster relay EP 100

6 ANALOG POSITIONER EP 100 INPUT Two-wire system Reverse polarity protection... feature Signal range ma Operating range ,5 ma Voltage...DC 6-42 V Load Ω 6 V at 20 ma RESPONSE CHARACTERISTIC Sensitivity...0,2 % of travel span Non-linearity... ± 0,8 % of travel span Hysteresis... ± 0,5 % of travel span Temperature effect... ± 0,5 %/10 K Supply air dependence... 0,3 %/1 bar (15 psi) Mechanical vibration Hz up to 0,14 mm, Hz up to 2g... 0,25 % of travel span SUPPLY Supply air pressure...1,4-6 bar ( psig) Supply air... entsprechend IEC AMBIENT CONDITIONS Operating conditions acc. to IEC the device can be operated at a classe Dx location Ambient temperature C ( 40 to 176 F) (devices before rev C ( 4 to 176 F)) Relative humidity % CONFIGURATION with switches: Rotation... clockwise or counter clockw. Input signal ma (direkt) 20-4 ma (inverse) Split range 1) 2) ma, ma ma, 12-4 ma with potentiometers:... Zero (ZERO) Span (S) Gain (G) Damping Transport and storage Ambient temperature C ( 40 to 176 F) Storage conditions according to IEC : 1K5; 1B1; 1C2; 1S3; 1M2 Protection class according to IEC IP 65 3) according to NEMA... Type 4X 3) 1) The digital positioner SRD992 offers enlarged functionality 2) At maximum rotation angle range of 30 degrees (± 15 degrees around center position of feedback lever). Split range is not available for actuators with a swivel range > 30 degrees 3) Under services as directed post@ebro-armaturen.com PDF

TZIM. Electropneumatic Analog Positioner 10/ EN

TZIM. Electropneumatic Analog Positioner 10/ EN TZIM Electropneumatic Analog Positioner EP001XA.tif Q Convenient, simple design Q Easy to handle Q User-friendly operation, easy to understand Q Reliable concept, I/P conversion through the 500,000 times