ORDERING INFORMATION:

Transcription

1 OUBLE HUNG SLIER 9200 SASH & KEEPERS The options available on Truth Hardware s 9200 Series Sash Locks are virtually endless. There are bases with or without alignment lugs which are helpful in preventing side shift of the sash (See Truth Tip #1). There are various mounting hole patterns from which to choose, which will ensure that your hardware is located in the most efficient location for optimum holding power (See Truth Tip #5). A variety of locking cams are available that help to pull meeting rails tightly together and will produce a better seal of the sash at the head and sill to help decrease air infiltration. Another reason for optional cam sizes is to help avoid potential interference created when the cam extends out to far. Refer to the following drawings to find the one which best meets your requirements. stability for years in direct sunlight. Please refer to Truth s olor hart for examples of Truth s most popular finish options. Truth also offers a wide range of decorative plated finishes contact Truth for additional information on availability of these finishes on specific product lines. ORERING INFORMATION: 1. hoose the 9200 Series am Lock style desired (specify by part number). 2. Specify finish number. 3. Specify Keeper to be ordered. 5. For vinyl window applications, mounting screws should pass through two PV walls, or one PV wall and one insert wall. For this reason, it may be necessary to use a longer screw than is recommended. 6. For metal window profiles, Truth recommends stainless steel machine screws. However, in most applications, stainless steel sheet metal screws will provide adequate holding power. INLUE TRUTH SPES ON YOUR NET WINOW PROJET Window check rail locks shall be included which will increase both security and weather seal tightness. The lock must provide easy operation and positive locked feel. Based on window design, and the space allowed for mounting the window hardware some window systems are better suited for narrower keepers, or even facemounted varieties. The 9200 Series has a number of Top Mount, and Face Mount keepers to choose from. LOGO OPTIONS: For that personalized touch, Truth s 9200 Series heck Rail Locks are capable of accepting your company s name or logo. Truth s logo reproduction process is an attractive way of highlighting your company signature. For further details on where your company s logo would appear, please refer to the following drawings. WARRANTY: Protected under the terms of the Truth Warranty for Window & oor Manufacturers & Authorized istributors. Refer to Truth s Terms & onditions for further details. MATERIAL: High-pressure, corrosion-resistant, die-cast zinc. FINISH: Electrostatically applied, durable coatings that provide excellent resistance to chipping, scratching and corrosion while maintaining color Types of screws required determined by material of profile used (sold separately). For additional information on screw selection - see Truth Tips. TRUTH TIPS: 1. A lock with pick-resistant alignment nibs should be used whenever possible. A lock without nibs should be chosen when the lugs cause interference with divided light grills or other window features. 2. A lock with a small cam should be used when the larger sweep radius of the.125 (3.2 mm) pull-in cam causes interference with the glazing or other areas of the profile. A face-mounted keeper is usually required. 3. When two locks are used on one window, the placement of each lock, with respect to its keeper, becomes very critical to maintain a constant weatherseal on all sides of the window and to insure that each lock engages properly with its keeper. 4. For accurate hardware placement in vinyl or metal applications, pre-drilling of the window profile is recommended. Window check rail locks will be of internal cam design to provide optimum pull-in to aid in sealing the meeting rails. The lock and accompanying keeper will prevent misalignment during locking. The lock and keeper shall be constructed of high pressure zinc alloy die castings. Window locks shall be 9200 Series locks as manufactured by Truth Hardware. 3

2 SASH & KEEPERS FIG. 1 SASH AN KEEPER [72.0 mm] NIBS NESTING NIBS A [25.4 mm] LOGO AREA NO NIBS SHOWN RIGHT HAN SHOWN B LOGO AREA.735 [18.7 mm] AVAILABLE LOGO AREA LOGO AREA SHOWN FULL SALE.470 [11.9 mm] HANING NIBS 3a A A A A A A "A" IMENSION (9.9mm) (9.9mm) (11.1mm) (18.3mm) (11.1mm) (11.1mm) (9.9mm) (9.9mm) (11.1mm) (11.1mm) (18.3mm) IMENSION 2 (57.2mm) 2 (57.2mm) (54.8mm) 2 (57.2mm) 2 (57.2mm) 2 (57.2mm) 2 (57.2mm) (54.8mm) RH LH NO NIBS NIBS NESTING NIBS.187 IA. RIVET * ALL SREWS ARE TO BE PHILLIPS FLAT HEA. (LENGTH AN TYPE TO BE ETERMINE BY PROFILE) REOMMENE SREWS * AM REAH NO PULL-IN NO PULL-IN

3 SASH & KEEPERS FIG. 2 /KEEPER OMPATIBILITY TABLES IMENSION (HOLE ENTER TO HOLE ENTER- TO KEEPER) S A A A A A A SURFAE MOUNT KEEPERS KEEPER ENTER OF SREW B SASH SURFAE MOUNT KEEPER LOATION FAE MOUNT KEEPER LOATION S IMENSION FAE MOUNT KEEPERS b

4 SASH & KEEPERS FIG KEEEPER.160 [4.1 mm] REOMMENE SREWS: [53.9 mm] SREWS (LENGTH AN THREA TYPE TO BE ETERMINE BY PROFILE).320 [8.1 mm].460 [11.7 mm] AVAILABLE S 0.60 (15.2mm) 0.60 (15.2mm) 0.93 (23.5mm) 0.60 (15.2mm) 0.93 (23.5mm) FIG KEEPER 2 [57.2 mm].136 [3.5 mm].280 [7.1 mm].480 [12.2 mm] AVAILABLE S (QTY 2) #6 SREW WITH A #5 HEA (LENGTH AN THREA TYPE TO BE ETERMINE BY PROFILE.) A A A A (15.0mm) 3c

5 SASH & KEEPERS FIG KEEEPER [52.3 mm].280 [7.1 mm] [3.0 mm].140 [3.6 mm].480 [12.2 mm] AVAILABLE S (QTY 2) #6 SREW WITH A #5 HEA (LENGTH AN THREA TYPE TO BE ETERMINE BY PROFILE.) A A A A (15.0mm) FIG KEEPER.528 [13.4 mm] 2 [57.2 mm].120 [3.0 mm] [3.8 mm].303 [7.7 mm] AVAILABLE S 0.57 (14.5mm) 0.62 (15.7mm) 0.62 (15.7mm) 0.57 (14.5mm) 0.62 (15.7mm) 0.62 (15.7mm) 3d

6 SASH & KEEPERS FIG KEEPER [55.9 mm] [3.6 mm] [7.1 mm] [6.8 mm].480 [12.2 mm] A A A A AVAILABLE S 0.59 (15.0mm) 0.92 (23.4mm) 0.59 (15.0mm) 0.59 (15.0mm) 0.92 (23.4mm) FIG KEEPER.300 [7.6 mm].505 [12.8 mm] [55.5 mm].150 [3.8 mm] [7.6 mm] AVAILABLE S 0.60 (15.2mm) 0.93 (23.5mm) 0.60 (15.2mm) 0.93 (23.5mm) 3e

7 SASH & KEEPERS FIG KEEPER 2 [57.2 mm].160 [4.1 mm].320 [8.1 mm] [2.3 mm].473 [12.0 mm] AVAILABLE S (QTY 2) #8 PHILLIPS FLAT HEA A A (15.2mm) FIG KEEPER [52.4 mm].344 [8.7 mm].516 [13.1 mm].278 [7.1 mm].500 [12.7 mm] AVAILABLE S A A (20.1mm) (27.4mm) 3f

8 SASH & KEEPERS FIG KEEPER [54.8 mm].123 [3.1 mm].275 [7.0 mm].460 [11.7 mm] (QTY 2) #8 PHILLIPS FLAT HEA AVAILABLE S A A (14.5mm) FIG KEEPER 2 [57.2 mm].123 [3.1 mm].505 [12.8 mm] AVAILABLE S A A (14.5mm) 3g

9 SASH & KEEPERS FIG FAE MOUNT KEEPER [38.1 mm] AVAILABLE S.190 [4.8 mm].289 [7.3 mm].397 [10.1 mm] [25.4 mm].270 [6.9 mm].093 [2.4 mm].160 [4.1 mm] FIG FAE MOUNT KEEPER [44.4 mm] AVAILABLE S.406 [10.3 mm].150 [3.8 mm] [33.7 mm].875 [22.2 mm].467 [11.9 mm].070 [1.8 mm] 3h

10 SASH & KEEPERS FIG FAE MOUNT KEEPER [38.1 mm] AVAILABLE S.397 [10.1 mm].190 [4.8 mm].944 [24.0 mm].828 [21.0 mm] [40.0 mm].217 [5.5 mm].434 [11.0 mm].093 [2.4 mm] FIG FAE MOUNT KEEPER AVAILABLE S [38.1 mm].452 [11.5 mm] [39.7 mm] [44.4 mm] [25.4 mm].070 [1.8 mm].090 [2.3 mm] (QTY 2) #6 PHILLIPS PAN HEA 3i

11 SASH & KEEPERS FIG FAE MOUNT KEEPER AVAILABLE S [71.1 mm].320 [8.1 mm] [52.4 mm].370 [9.4 mm].185 [4.7 mm] [6.7 mm] FIG FAE MOUNT KEEPER.322 [8.2 mm] [69.8 mm] AVAILABLE S [52.1 mm] [4.7 mm] [5.6 mm].370 [9.4 mm] 3j

12 SASH & KEEPERS FIG FAE MOUNT KEEPER.117 [3.0 mm] [50.6 mm].275 [7.0 mm] [26.4 mm].151 [3.8 mm] [25.4 mm] [38.1 mm].244 [6.2 mm].195 [5.0 mm] FIG KEEPER [52.1 mm].125 [3.2 mm] AVAILABLE S A A (22.1mm).060 (1.5mm) B.269 [6.8 mm].442 [11.2 mm] [65.7 mm] (QTY2) #6 SHEET METAL SREWS PHILLIPS FLAT HEA SREWS (LENGTH AN THREA TYPE TO BE ETERMINE BY PROFILE) 3k 700 WEST BRIGE STREET, OWATONNA, MN n n TRUTH.OM