Metering systems 0368EN April /4 domestic water unit outputs

Transcription

1 068EN pril 08 / domestic water unit outputs 07U98 Main characteristics Horizontal or vertical installation hut-off valves welded to water meter Dial with mechanical totalizers and index for partial consumptions and flow Pulse output with M-us presetting ( pulse = 0 liters) pacer for water meter for installation on site rackets for fitting in user modules rass shut-off valves with full port, chrome-plated ball, PTFE seals Check valve with POM resin body and inner parts, stainless steel spring CE marking (MID compliance) Water meter error quality diagram Y00 Y0 Description Domestic water unit outputs are used to meter domestic water consumptions. They include a pair of shut-off valves, a single-jet water meter (GEY90-9) and a spacer to replace the water meter. The water meter is equipped with a totalizer to read consumptions; a pulse output enables smart metering via M-us. The check valve integrated in the shut-off valve with a green handle provides highly reliable readings. The handles of the other shut-off valves are blue or red respectively for domestic cold or hot water outputs. Error % Q Q Q Q GEY90, GEY9 (/ ) Installation Q [m /h] Q [m /h] Q [m /h] Q [m /h] Horizontal, 0,0 0,00, Vertical, 0,06 0,00, Versions and product codes Codice Tipo di acqua sanitaria ttacchi Interasse di montaggio [mm] Q / Q =,6 Q / Q = 80 (hozrizontal installation) Q / Q = 0 (vertical installation) Y00 fredda /" 0 Y0 calda /" 0 Operation Technical data Max. working temperature: 0 C for domestic cold water meter 90 C for domestic hot water meter Max. working pressure: 6 bar (0 bar with plastic spacer) hut-off valve Losses of pressure Check valve,0, Domestic water meter p [bar] oiler room or aqueduct User module (domestic water) 0, 0,0 0,0,0 Q [m /h] 0,0 Product code Connections Kv Y00 Y0 /",

2 068EN pril 08 / domestic water unit outputs 07U98 Installation Comply with rules provided for use (installation, fitting, etc.), operation, recalibration and replacement of water meters. lso refer to assembly instructions. Data centralization Water meter data can be remoted with energy meters GE and centralization components GE-. Dimensions Product code [mm] [mm] b b Y Y tandards of reference CE marking MID (0//EU) hut-off valve Plastic spacer for water meter hut-off valve with integrated check function Domestic water meter upport unit The two shut-off valves ( - ) are connected to the spacer () and sealing is provided by special gaskets. We recommend replacing the water meter with the spacer to flush the system before installing the water meter. To install the domestic water output in the user modules, use the two support units (): metering cabinets are equipped with special guides; the plate must be installed inside the guide (); the clip (b) must be installed on top of the guide and tightened using the screw (). We recommend preinstalling the support assembly before fitting the plate into the guide so that the only operation required is tightening of the screw. Once the system has been flushed, the spacer () can be replaced with the water meter (). fter installing all parts, test the system under pressure. Product specifications Y00 Domestic cold water meter output. Connections /. Two shut-off valves with blue and green handles, chrome-plated ball, PTFE seals. Check valve with POM resin body and inner parts, stainless steel spring. Domestic cold water single-jet meter, with pulse output (REED contact), nominal flow rate, m³/h, center distance 0 mm. Plastic spacer for system flushing. rackets for cabinet installation. Output length 6 mm. Max. working temperature 0 C. Max. working pressure 6 bar. CE marking (MID compliance). Y0 Domestic hot water meter output. Connections /. Two shut-off valves with red and green handles, chrome-plated ball, PTFE seals. Check valve with POM resin body and inner parts, stainless steel spring. Domestic hot water single-jet meter, with pulse output (REED contact), nominal flow rate, m³/h, center distance 0 mm. Plastic spacer for system flushing. rackets for cabinet installation. Output length 6 mm. Max. working temperature 90 C. Max. working pressure 6 bar. CE marking (MID compliance). Follow flow directions shown on water meter. Nota. For additional information on domestic water meters GEY90-9, refer to technical sheet 07EN. dditional information For more information, go to or contact our technical assistance service: ' * consulenza.prodotti@giacomini.com This document provides only general indications. Giacomini.p.. may change at any time, without notice and for technical or commercial reasons, the items included herewith. The information included in this technical sheet do not exempt the user from strictly complying with the rules and good practice standards in force. Giacomini.p.. Via per lzo, an Maurizio d Opaglio (NO) Italy

3 070EN July 08 domestic water unit outputs 07U88 Main characteristics Horizontal or vertical installation hut-off valves welded to water meter Dial with mechanical totalizers and index for partial consumptions and flow Pulse output with M-us presetting ( pulse = 0 liters) pacer for water meter for installation on site rackets for fitting in user modules rass shut-off valves with full port, chrome-plated ball, PTFE seals Check valve with POM resin body and inner parts, stainless steel spring CE marking (MID compliance) Water meter error quality diagram Y00 Y0 Description Domestic water unit outputs are used to meter domestic water consumptions. They include a pair of shut-off valves, a single-jet water meter (GEY9-96) and a spacer to replace the water meter. The water meter is equipped with a totalizer to read consumptions; a pulse output enables smart metering via M-us. The check valve integrated in the shut-off valve with a green handle provides highly reliable readings. The handles of the other shut-off valves are blue or red respectively for domestic cold or hot water outputs. Error % Q Q Q Q GEY9, GEY96 ( ) Installation Q [m /h] Q [m /h] Q [m /h] Q [m /h] Horizontal,0 0,00 0,080,0 Vertical,0 0,00 0,60,0 Versions and product codes Codice Tipo di acqua sanitaria ttacchi Interasse di montaggio [mm] Q / Q =,6 Q / Q = 80 (horizontal installation) Q / Q = 0 (vertical installation) Y00 fredda " 0 Y0 calda " 0 Operation Technical data Max. working temperature: 0 C for domestic cold water meter 90 C for domestic hot water meter Max. working pressure: 6 bar (0 bar with plastic spacer) hut-off valve Losses of pressure,0, Check valve Domestic water meter oiler room or aqueduct p [bar] User module (domestic water) 0, 0,0 0,0,0 Q [m /h] 0,0 Product code Connections Kv Y00 Y0 ",

4 070EN July 08 domestic water unit outputs 07U88 Installation Comply with rules provided for use (installation, fitting, etc.), operation, recalibration and replacement of water meters. lso refer to assembly instructions. Data centralization Water meter data can be remoted with energy meters GE and centralization components GE-. Dimensions Product code [mm] [mm] b b Y Y tandards of reference CE marking MID (0//EU) hut-off valve Plastic spacer for water meters hut-off valve with integrated check function Domestic water meter upport unit The two shut-off valves ( - ) are connected to the spacer () and sealing is provided by special gaskets. We recommend replacing the water meter with the spacer to flush the system before installing the water meter. To install the domestic water output in the user modules, use the two support units (): metering cabinets are equipped with special guides; the plate must be installed inside the guide (); the clip (b) must be installed on top of the guide and tightened using the screw (). We recommend preinstalling the support assembly before fitting the plate into the guide so that the only operation required is tightening of the screw. Once the system has been flushed, the spacer () can be replaced with the water meter (). fter installing all parts, test the system under pressure. Product specifications Y00 Domestic cold water meter output. Connections. Two shut-off valves with blue and green handles, chrome-plated ball, PTFE seals. Check valve with POM resin body and inner parts, stainless steel spring. Domestic cold water single-jet meter, with pulse output (REED contact), nominal flow rate,0 m³/h, center distance 0 mm. Plastic spacer for system flushing. rackets for cabinet installation. Output length 0 mm. Max. working temperature 0 C. Max. working pressure 6 bar. CE marking (MID compliance). Y0 Domestic hot water meter output. Connections. Two shut-off valves with red and green handles, chrome-plated ball, PTFE seals. Check valve with POM resin body and inner parts, stainless steel spring. Domestic hot water single-jet meter, with pulse output (REED contact), nominal flow rate,0 m³/h, center distance 0 mm. Plastic spacer for system flushing. rackets for cabinet installation. Output length 0 mm. Max. working temperature 90 C. Max. working pressure 6 bar. CE marking (MID compliance). Follow flow directions shown on water meter. Note. For additional information on domestic water meters GEY9-96, refer to technical sheet 07EN. dditional information For more information, go to or contact our technical assistance service: ' * consulenza.prodotti@giacomini.com This document provides only general indications. Giacomini.p.. may change at any time, without notice and for technical or commercial reasons, the items included herewith. The information included in this technical sheet do not exempt the user from strictly complying with the rules and good practice standards in force. Giacomini.p.. Via per lzo, an Maurizio d Opaglio (NO) Italy

5 06EN pril 08 ervice water unit outputs 07U788 Main characteristics Module GEY0 with M-us outlet (splittable from water meter) M-us module battery life: indefinite with M-bus feed; one year without M-us feed (activated after first reading of water meter) Horizontal or vertical installation hut-off valves welded to water meter Dial with mechanical totalizers and index for partial consumptions and flow pacer for water meter for installation on site rackets for fitting in user modules rass shut-off valves with full port, chrome-plated ball, PTFE seals Check valve with POM resin body and inner parts, stainless steel spring CE marking (MID compliance) Error quality diagram Description Unit output Y008 is enhanced for use as third output in service water metering. It includes a pair of shut-off valves, a single-jet water meter (GEY) and a spacer to replace the water meter. The check valve integrated in the shut-off valve with a green handle provides highly reliable readings. The M-us module (GEY0) is included: the water meter output cables are already set with the M-us signal, as opposed to the other domestic water meters that feature a pulse output. Item Y008 can be used also as standard device with domestic cold water. Versions and product codes Product code Type of domestic water Connections Y008 Installation center distance [mm] Y008 fredda - di servizio /" 0 Error % Q Q Q Q GEY (/ ) Installation Q [m /h] Q [m /h] Q [m /h] Q [m /h] Horizontal, 0,0 0,00, Vertical, 0,0 0,00, Q / Q =,6 Q / Q = 00 (horizontal installation) Q / Q = 0 (vertical installation) Techincal data Max. working temperature: 0 C Max. working pressure: 6 bar (0 bar with plastic spacer) Operation Losses of pressure,0, hut-off valve p [bar] 0, Check valve Domestic cold water meter oiler room or aqueduct User module (domestic water) 0,0 0,0,0 Q [m /h] 0,0 Product code Connections Kv Y008 /",0

6 06EN pril 08 ervice water unit outputs 07U788 Installation Comply with rules provided for use (installation, fitting, etc.), operation, recalibration and replacement of water meters. lso refer to assembly instructions 6 Data centralization Water meter data can be remoted with energy meters GE and centralization components GE-. Dimensions b Product code [mm] [mm] Y b tandards of reference CE marking MID (0//EU) hut-off valve with integrated check function Plastic spacer for water meters hut-off valve Domestic water meter upport unit 6 M-us module GEY0 The two shut-off valves ( - ) are connected to the spacer () and sealing is provided by special gaskets. We recommend replacing the water meter with the spacer to flush the system before installing the water meter. Item Y008 includes three supports to fit the user modules: the user modules are equipped with special guides; the plate must be installed inside the guide (); the clip (b) must be installed on top of the guide and tightened using the screw (). We recommend preinstalling the support assembly before fitting the plate into the guide so that the only operation required is tightening of the screw. Once the system has been flushed, the spacer () can be replaced with the water meter (). fter installing all parts, test the system under pressure. Product specifications Y008 Domestic cold water unit output for service water. Connections /. Two shut-off valves with blue and green handles, chrome-plated ball, PTFE seals. Check valve with POM resin body and inner parts, stainless steel spring. Domestic cold water single-jet meter, with M-us module, nominal flow, m³/h, center distance 0 mm. Plastic spacer for system flushing. rackets for cabinet installation. Output length 6 mm. Max. working temperature 0 C. Max. working pressure 6 bar. CE marking (MID compliance). Note. For additional information on domestic water meters GEY, refer to technical sheet 07EN. Follow flow directions shown on water meter. dditional information For more information, go to or contact our technical assistance service: ' * consulenza.prodotti@giacomini.com This document provides only general indications. Giacomini.p.. may change at any time, without notice and for technical or commercial reasons, the items included herewith. The information included in this technical sheet do not exempt the user from strictly complying with the rules and good practice standards in force. Giacomini.p.. Via per lzo, an Maurizio d Opaglio (NO) Italy