PARTS MANUAL Kifco AgRain S/N 400,111 + Irrimec S/N 162 +

Size: px

Start display at page:

Download "PARTS MANUAL Kifco AgRain S/N 400,111 + Irrimec S/N 162 +"

Silvia Flowers
5 years ago
Views:

PARTS MANUAL Kifco AgRain S/N 400, + Irrimec S/N 6 + ST4, ST5,ST6,ST7 FEB. 005 700 S. Schrader Ave. P.O.

1 PARTS MANUAL Kifco AgRain S/N 400, + Irrimec S/N 6 + ST4, ST5,ST6,ST7 FEB S. Schrader Ave. P.O. Box 90 Havana, IL 6644 USA Phone: Fax: Notes: For Parts That Are Described As "Left" Or "Right" The Water Inlet Side Of The Machine Is Considered The Right Side. Items Such As Common Fasteners, Grease Fitting, And Other Small Parts Easy To Acquire Locally Are NotListed. Updated 9/0/08 Rc Page

2 Running Gear Assembly Hyd. Jack Cradle Spool Levelwind Hose Retention Bar Manual Lifting Device Hydraulic Lifting Device Automatic Lifting Device Drive Train Gearbox - TURBINE DRIVE Engine Drive Gearbox - ENGINE DRIVE Turbine - 0/50 Turbine - 5/30 Gun Cart ST4 Gun Cart ST Page

3 Running Gear Assembly 4a 4b c 8 a b e f g h 7 7a 7b a 8b d 3e 0 Running Gear Assembly Item Part Number Description Frame AG4 a 0780 Frame AG5 b 0000 Frame AG6 c Frame AG7 d Turntable Bearing ST3 e 0990 Turntable Bearing ST4 f 0990 Turntable Bearing ST5 g Turntable Bearing ST6 h Turntable Bearing ST Pin 3d Hitch, Clevis (AG4/5/6) Not as Shown 3e Hitch, Clevis (AG7) Not as Shown 4a Screwjack (AG4) Not as Shown 4b Screwjack (AG5-6) Spacer, Jack Cylinder Cylinder, Hyd Jack - AR7/Squatter Jack, Hand Hydraulic (AG7) Jack Lever Pin, Jack Arm Pivot 30MM x 5MM Pin Dia 5MM x 5MM Jack Base Pinion, Turntable - A-Series Hyd Motor Mt Adapter, Jack, AR Motor AXLE,50 X 50 X 650 AG4-5 7a 079 AXLE,60 X 60 X 750 AG6 7b 079 AXLE,60 X 60 X 800 AG WHEEL & TIRE 0.80/ PR8 AG4-5 8a 079 WHEEL & 0.0/75-5.3/8 PR - 6 holes AG6, (AG7 Four wheels chassis) 8b 079 WHEEL & TIRE.5/ PR for AG7 Two Wheel chassis Page 3

4 Hyd. Jack ST7 Hyd. Jack ST7 Item Part Number Description HANDLE,BRACKET - HYD JACK HOUSING, LOWER - HYD JACK HOUSING, UPPER - HYD JACK FOOT - HYD JACK CYLINDER JACK JACK HOUSING HYD JACK HANDLE STRAP, HYD JACK HANDLE PIN, HYD JACK SNAP RING, HYD JACK BOLT,8-.5MM X 35MM NUT, 8MM VALVE SEAT, HYD JACK O-RING 5, HYD JACK O-RING, HYD JACK MM BALL, HYD JACK MM BALL, HYD JACK SPRING, HYD JACK PACKING NUT, HYD JACK O-RING 43, HYD JACK SEAL, HYD JACK CAP, HYD JACK O-RING 4093, HYD JACK MM PB3 UNI 4838, HYD JACK Page 4

5 Hyd. Jack ST7 (cont.) Item Part Number Description RING, SEALING, HYD JACK SPRING, HYD JACK PLUG, (BALL) HYD JACK SEAL, UPPER - HYD JACK O-RING, UPPER (.4X"ID)- HYD JACK NUT, NYLOCK ROD TOP - HYD JACK O-RING, LOWER (.4X.5ID)-HYD JACK GUARD, DUST - HYD JACK GUARD DUST, HYD JACK SEAL, LOWER - HYD JACK WIPER, ROD - HYD JACK HANDLE GRIP, HYD JACK HANDLE, HYD JACK SNAP RING, MAN/HYDRAULIC JACK, A-SE SPACER, HYD JACK BALL,5.5MM, HYD JACK SEAT, HYD JACK SPRING, HYD JACK SPACER, HYD JACK PISTON, HYD JACK O-RING 308, HYD JACK VALVE, HYD JACK PIN, HYD JACK KNUCKLE,FOOT TO ROD - MAN/HYD JACK BOLT,0-.5MM X 75MM ZINC PLATED NUT 0-.5MM Page 5

6 Cradle Item Part Number Description GUARD, CABINET - A-SERIES a 0067 GUARD, PLASTIC PTO - AR-SERIES (not shown) FOOT, STABILIZER-TURBINE SIDE -AG4 a 0530 FOOT, STABILIZER -TURBINE SIDE -AG5 b 0950 FOOT, STABILIZER TURBINE SIDE -AR6 c FOOT, TURBINE SIDE STABILIZER-AR CYLINDER, HYD LEG - AR5/5+/6/ FOOT, STABILIZER CHAIN SIDE -AG4 4a 0540 FOOT, STABILIZER CHAIN SIDE -AG5 4b 0960 FOOT, STABILIZER CHAIN SIDE -AG6 4c FOOT, STABILIZER CHAIN SIDE -AG PAD ST HOSE GUIDE BAR AG4 6a 0550 HOSE GUIDE BAR AG5 6b 0970 HOSE GUIDE BAR AG6 6c HOSE GUIDE BAR AG ROLLER, AG4 7a 0560 ROLLER, AG5 7b 0980 ROLLER, AG6 7d 0380 ROLLER, AG HANDLE, JACK TEE, HYDRAULIC /4" BSPP- A SERIES HYDRAULIC.PUMP a HOSE ASM, TEE TO CYLINDER-AR5/6/7 b HOSE, RT X 3.4MT HYD MAN AG HOSE ASM, TO TRACTOR-AR5/6/ HOSE ASM, TEE TO CYLINDER-AR5/6/7 Page 6

7 Cradle Item Part Number Description QUICK COUPLER-HOSE /" MALE SUPPORT, HYD HOSE PIN, UPPER CYLINDER - AR5/6/ PIN, 5MM X 70MM DOUBLE SUPPLY SUPPORT ST4-ST5 9a 0875 DOUBLE SUPPLY SUPPORT ST6-ST DOUBLE SUPPLY PIPE 3"/ ST a 0876 DOUBLE SUPPLY PIPE 4" ST5-6 0c 0876 DOUBLE SUPPLY PIPE 5" ST U-BOLT M8 3"/ a 0877 U-BOLT M SEAL RING 3.5" 5.5ODX.5 a SEAL RING 4" 6-3/8 OD X 9/6 b SEAL RING 5" 7-/ OD X 3/4" CS PLUG 3"/ 3a PLUG,WITH LEVER,BALL 4" 3b 0878 PLUG 5" LEVER RING 3.5IN 89MM 4a this part is welded to # 3 on the 4" only 4b LEVER RING 5" 45 33MM SHIELD, BELT IRCO 5a SHIELD, BELT B600 Page 7

8 Cradle LEG,TS STABILIZER-AG4/AR4/(A 380+) 6a 0600 LEG, TURBINE-SIDE STABILIZER-AR5 6b 057 HYDRAULIC LEG FOR ST6 6c HYDRULIC LEG AG LEG,CS STABILIZER-AG4/AR4/(A 380+) 7a 0689 HYDRAULIC LEG ST5 7c 0698 HYDRAULIC LEG AG PUMP SUPPORT PLATE 8a 0400 U-BOLT, M PLUG 70 X 70 ST4 49a CAP PLUG 80MM X 80MM ST5-6 49b CAP PLUG 00MM X 80MM Page 8

9 Cradle Item Part Number Description HANDLE CRANK AG4 30a CRANK AG5-AG BEARING,BRZ SPRING, RUBBER STABILIZER WASHER NUT PIN, DIA. 0MM X 00MM LONG SPRING,RIGHT 36a SPRING,LEFT PAWL,RIGHT 37a PAWL,LEFT GRIP, TURBINE PIN HOSE, HYD RT EL X STR 0.7M AG HOSE, HYD RT EL X STR 3.0M ST a HOSE, HYD RT EL X STR 3.0M AG HOSE ASM, TS HYD CYL. 3.0M- AG4 4a 0880 HOSE ASM, TS HYD CYL. 3.4M- AG HOSE ASSEMBLY-RT 90 X STR 3.7M AG4 43a HOSE ASM, JACK - AR-SERIES CONTROL, HYD. FLOW - A-SERIES VALVE, 3 SECTION HYD DIRECTIONAL BRACKET, 3-LEVER VALVE - AR-SERIES U-BOLT, M COVER, 3-LEVER VALVE - A-SERIES STOP TURRET PIN STOP LEVER FOR US TS 5a STOP LEVER FOR US CS FIX STOPLEVER US SPRING, 30 X L:00 US HAND GRIP M8 Page 9

10 Spool Item Part Number Description O-RING 04MM X 3.53MM ST4 a O-RING 5-/8"OD X /8" CS ST5 b O-RING 54MM ID X 3.53MM 0000 O-RING, 69.MM X 5.33MM ST4 a O-Ring, 3.35" ID X.0" CS ST5 b O-RING 6MMX0MM ST RING, SEALING ST4 3a 0446 RING, SEALING ST5 3b RING, SEALING ST SPACER ST4 4a 0400 SPACER, ST5 4b SPACER ST SNAP RING 65 MM ST4 3 5a Snap Ring E85 (AG5) 3 5b SNAP RING E-0 (AG6-7) Washer Thrust, (AG4) 6a 0880 Washer Thrust, ( AG5) 6b Washer Thrust, (AG6-7) Washer, Wear (AG4) 7a Washer, Wear (AG5) 7b Washer, Wear (AG6-7) Ring Nut, Slip Joint (AG5) 8a Ring Nut, Slip Joint (AG6-7) Bearing, Flanged (AG4) 9a Bearing, Flanged (AG5) 9b Bearing, Flanged (AG6-7) Page 0

11 Spool Item 0 0a 0b a b a b 3 3a 4 4a 5 5a 6 6a 7 7a 8 8a Part Number Description Sleeve (AG4) 060 Sleeve (AG5) Sleeve (AG6-7) Spacer (AG4) Spacer (AG5) SPACER, ST Support Bearing ST Support Bearing ST Support Bearing ST MM HOSE END WITH FLANGE AND STOP MM HOSE END WITH FLANGE W/O STOP 088 8MM HOSE RING WITH FLANGE HYDR./MAN MM HOSE END WITH FLANGE W/O STOP MM HOSE END WITH FLANGE HYDR./MAN MM HOSE END WITH FLANGE W/O STOP MM HOSE RING WITH FLANGE HYDR./MAN MM HOSE END WITH FLANGE W/O STOP MM HOSE RING WITH FLANGE HYDR./MAN MM HOSE END WITH FLANGE W/O STOP MM HOSE RING WITH FLANGE HYDR./MAN MM HOSE END WITH FLANGE W/O STOP Hose Band, 75mm 0099 Band, Hose 8mm Band, Hose 90mm Band, Hose 00mm Band, Hose 0mm Band, Hose 0mm Page

12 Spool Item 6 6a 6b 7 7a Part Number 008 ELBW, ST4 75MM 0080 ELBOW, 8MM, ST4 090 ELBOW, 90MM, ST ELBOW, 8MM, ST5 060 ELBOW, 90MM, ST5 Description 7b 0300 ELBOW, 00MM, ST5 7c 05 ELBOW,0MM, ST ELBW,33 ST6 8a 050 ELBW,37 ST6 8b 05 ELBW,40 ST ELBW,00MM TUBE - ST7 9a 0386 ELBW,AR7 0MM 9b 0386 ELBW,AR7 0MM SUPRA CLAMP 73MM-79MM ST4 30a SUPRA CLAMP 85MM-9MM ST5 30b SUPRA CLAMP MM-MM ST6-ST BAND,RING LOCK 4 IN LEVER RING 3" 45 76MM ( ST4) 35b LEVER RING 4" 45 08MM 36a HOSE ASSY,SUPPLY 3"X30FT (AG4) 36b HOSE ASSY,SUPPLY 4"X30FT (AG5,6,7) 36c 5496 HOSE, IRR SUPPLY REMNANT 3"(PERFT) (AG4) (hose only) 36d HOSE, IRR SUPPLY REMNANT 4"(PERFT) (AG5,6,7) (hose only) 36e Clamp, Supra 04mm-mm (for 4"Supply Hose only) not shown ft. 30 ft Page

13 Spool 37a HOSE, 70X79MM -0,6-4M (3.7") LONG (ST4) 37b HOSE, 80X98MM -0,6-4M (3.87") LONG (ST5) 37c 067 HOSE 00 X 8 X.55M (.65") LONG (ST6) 37d 0670 HOSE 00 X 8 X.7M (7.6") LONG (ST7) 40a O-Ring 4" (AG5,6,7) (not shown) 40b O-Ring 3" (AG4) (not shown) 4a Chain /" 43p (44 Rollers AG4) ft b Chain /" 63p (64 Rollers AG5) ft c Chain /" 95p (96 Rollers AG6) ft..9 4d Chain /" 35p (36 Rollers AG7) ft a 050 ELBW,UPPER (COMER BOX)-AR4 4b 0840 ELBW,UPPER 6"FLNG TO WELD(COMER)AR5 4c 000 ELBW,UPPER AR6-7 Page 3

14 Spool Item Part Number Description SHIELD, SPOOL AG4 KIFCO AG-RAIN 4 39a SHIELD, SPOOL AG5/5+ KIFCO AG-RAIN 4 39b SHIELD, SPOOL AG6 KIFCO AG-RAIN 4 39c SHIELD, SPOOL ST7 KIFCO AG-RAIN END SWITCH BAR CS ST END SWITCH BAR TS ST END SWITCH BAR BEVEL GEAR ST END SWITCH BAR CS ST END SWITCH BAR TS ST END SWITCH BAR BEVEL GEAR ST END SWITCH BAR SEMI-AUTO ST END SWITCH BAR IRRIGATION BOOM ST END SWITCH BAR IRRIGATION BOOM ST5 Page 4

15 Levelwind Item Part Number Description Qty LEVELWIND FRAME -AR4 49" OAL aa LEVELWIND FRAME -ST " OAL a 0630 LEVELWIND FRAME - ST5 b 090 FRAME, LEVELWIND - ST6 c HOSE GUIDE FRAME ST6 LARGE d 009 LEVELWIND FRAME -ST7 zerk SHIELD MT GEARBOX,RIGHT ANGLE (ST4) 4a GEARBOX - LEVELWIND (CAST) (ST5-6-7) SPRKT, /" X 36 TOOTH FOR HOSE DIA. 63MM (ST4) 5a SPRKT, /" X 3 TOOTH FOR HOSE DIA. 70MM (ST4) 5b SPRKT, /" X 30 TOOTH FOR HOSE DIA. 75MM (ST4) 5c SPRKT, /" X 7 TOOTH FOR HOSE DIA. 8MM (ST4) 5d 0050 SPRKT, /" X 5 TOOTH FOR HOSE DIA. 90MM (ST4) 5e SPRKT, /" X 43 TOOTH FOR HOSE DIA. 75MM (ST5) 5f SPRKT, /" X 39 TOOTH FOR HOSE DIA. 8MM (ST5) 5g 0640 SPRKT, /" X 35 TOOTH FOR HOSE DIA. 90MM (ST5) 5h SPRKT, /" X 3 TOOTH FOR HOSE DIA. 00MM (ST5) 5i 0040 SPRKT, /" X 9 TOOTH FOR HOSE DIA. 0MM (ST5) 5j SPRKT, /" X 50 TOOTH FOR HOSE DIA. 8MM (ST6) 5k SPRKT, /" X 45 TOOTH FOR HOSE DIA. 90MM (ST6) 5l SPRKT, /" X 40 TOOTH FOR HOSE DIA. 00MM (ST6-7) 5m SPRKT, /" X 36 TOOTH FOR HOSE DIA. 0MM (ST6-7) 5n SPRKT, /" X 33 TOOTH FOR HOSE DIA. 0MM (ST6-7) HUB, SPROCKET 6a DOUBLE HUB,SPROCKET KEY, 7MM X 8MM X 5MM Page 5

16 Levelwind 8 8a 9 9a 0 0a 0b 0c 0d a a 3 3a 3b 3c 3d 3e 3f 3g 4 4a 4b 4c 4d 4e 4f SPROCKET, 0 TOOTH.0" PITCH SPRKT,LVLWND DRIVER 3T 5/8" LINK, HOSE GUIDE, OVAL END, " LINK, HOSE GUIDE, OVAL END, 5/8" 0004 CHAIN 5/8 METRIC ROLLER PER FT. 7 p (ST4) CHAIN.0" PER FOOT 85P (ST5) CHAIN.0" PER FOOT 84P (0DIA.) (ST5) CHAIN.0" PER FOOT 9P (ST6) CHAIN.0" PER FOOT 99P (ST7) SPRKT,LVLWND IDLER 3T (ST4) SPRKT,IDLER 80B0T 5MM SUPPORT, FORK - ST SUPPORT, FORK - ST5, ST6, ST FORK ASM, 75MM - ST FORK ASM, 8-90MM - ST4 066 FORK ASM, 75MM - ST FORK ASM, 8-90MM - ST5 066 FORK ASM, 00-0MM (4.5) - ST5 093 FORK ASM, 00-0MM (4 DEG) - ST6 093 FORK ASM, 0MM (4 DEG) - ST FORK ASM, 0MM (37 DEG) - ST GUIDE, FORK 75, 8, 90 - ST GUIDE, FORK 8, 90, 00 - ST GUIDE, FORK 0 - ST5 007 GUIDE, FORK 00/0 - ST6 007 GUIDE, FORK 0 - ST GUIDE, FORK 00-0 ST7 080 GUIDE, FORK 0 ST ROLLER,VERT. Page 6 ft ft ft. 7.0 ft ft. 8.5

17 Levelwind SHIELD, LEVELWIND GEARBOX TIE ROD SPACER, 90MMPE FORK (4.33")-ST4 8 8A 0406 SPACER, 3"-3.3" AG5-AG5+ 3.6" LONG 8C SPACER, 0MMPE FORK (8.86")-ST6 8D SPACER, 0MMPE FORK (9.5")-ST7 9 NUT 6MM SHIELD, LEVELWIND DRIVE, ST4 0a 0886 SHIELD, LEVELWIND DRIVE, ST5 0b 0886 SHIELD, LEVELWIND DRIVE, ST6 0c GUARD, LEVELWIND CHAIN - ST CHAIN TIGHTENER Chain /" 43p (44 Rollers AR4) ft. 0.3 a Chain /" 63p (64 Rollers AR5) ft b Chain /" 95p (96 Rollers AR6) ft..9 c Chain /" 35p (36 Rollers AR7) ft. 3.3 Page 7

18 HOSE RETENTION BAR ST Item Part Number Description Qty SHUTOFF BAR ST4 36.0" end to end on center pipe (axle) aa SHUTOFF BAR ST4 (wider than above.) a 0783 SHUTOFF BAR ST5 b 0783 SHUTOFF BAR AG6 c SHUTOFF BAR ST6 WIDE d SHUTOFF BAR AG PLUG, FOR BAR ST4 a 080 PLUG, FOR BAR ST RETAINER SPRING, COIL - SHUT OFF WASHER CABLE MT CABLE,ENGINE THROTTLE-ST4/5/6(05") HONDA ENGINE REGULATION ROD SUPPORT HONDA ENGINE REGULATION ROD ST4-5 9a 0803 HONDA ENGINE REGULATION ROD ST6-7 Page 8

19 MANUAL LIFTING DEVICE Item Part Number Description Qty FIXED FRAME ST4 a 0804 FIXED FRAME ST5 b 0804 FIXED FRAME ST SUPPORT PLATE L.30 ST4-5 a 0805 SUPPORT PLATE L.480 ST SUPPORT PLATE L.30 ST4-5 3a 0806 SUPPORT PLATE L.480 ST SUPPORT PLATE L.730 ST BRACKET WINCH, K U-BOLT M8 ST a 080 U-BOLT M8 ST HOOK CLEVIS EYE BOLT MF FORK PULLEY PULLEY SUPPORT ST a 086 PULLEY SUPPORT ST CLAMP,/4 CABLE CABLE,/4-7X9 GAC PER FT ft. 7 6 PIN, 0MM X 85MM (AT40 6a PIN, DIA. 0MM X 00MM LONG CHAIN, CART LIFT LEVER SUPPORT (AG-RAIN) WINCH K950 (AG-RAIN) WINCH PLATE FIX (AG-RAIN) 089 LEVER SUPPORT PLATE FIX (AG-RAIN) 0800 FIXED FRAME ST4 (AG-RAIN) a 080 FIXED FRAME ST5 (AG-RAIN) PLUG 70X SUPPORT PLATE (AG-RAIN) Page 9

20 HYDRAULIC LIFTING DEVICE Item Part Number Description Qty LIFTING FRAME ST4 a 004 LIFTING FRAME ST5 b 0040 LIFTING FRAME ST6 c 004 LIFTING FRAME ST LIFTING PROP ST4-5-6 L.000 a 0054 LIFTING PROP ST4-5-6 L.000 b 005 BRACE, LIFT BAIL - ST BRACKET, FRAME LIFT - ST5/6/ PIN, LIFT BRACE - ST5/6/ HANGER 5a 006 HANGER ST US CHAIN, CART LIFT M FORK, LIFT FRAME - ST FRONT BRACE HOLDER SPACER FRONT BRACE 090 PIN 0840 AWL GUIDE ST STOP ROD ST7 TS STOP ROD ST7 CS PIN, DIA. 0MM X 00MM LONG Page 0

21 AUTMATIC LIFTING DEVICE ST Item Part Number Description Qty LIFTING FRAME ST4 a 086 LIFTING FRAME ST5 b 086 LIFTING FRAME ST CHECK PLATE SUPPORT ST CHECK PLATE ST STOP ROD PROLONG ST STOP ROD LIFTING DEVICE SUPPORT TS ST4 6a 083 LIFTING DEVICE SUPPORT TS ST5 6b 083 LIFTING DEVICE SUPPORT TS ST LIFTING DEVICE SUPPORT CS ST4 7a 083 LIFTING DEVICE SUPPORT CS ST5 7b 083 LIFTING DEVICE SUPPORT CS ST DISK FOR SECURTY LEVER SECURTY STOP CHECK PLATE PROLONG 080 PLUG 70X PIN, DIA. 0MM X 00MM LONG Page

22 DRIVE TRAIN Item Part Number Description Qty. a SCREW 0MMX35MM ALEN FLAT (NOTE LENGTH) b SCREW 0MMX5MM ALEN FLAT (NOTE LENGTH) WASHER,SPECIAL PINION, 35BORE 6PIN 5 OD Z7-AR4 3a 06 PINION, 35BR 6PIN 4OD Z7-AR5/A 3b 06 PINION, 35BORE 0PIN 35 OD Z7-AR6 3c 063 PINION, 35BORE 0PIN 50 OD Z7-AR KEY, 0MM X 8MM X 40MM GEARBOX PLATE AR4-5 5a 07 GEARBOX PLATE AR ANTI-RETURN PAWL PIN,ANTI-RETURN PAWL AR4/5/6/ BEARING,6005-RS SHAFT,BELT IDLER PULLEY IDLER 3 GROOVE SPACER MM X 5MM X 35MM SNAP RING E ALTENATOR PULLEY KEY 4MM X 4MM X MM 5 00 ALTENATOR 6 0 ARM, IDLER BIMA - AR4/5/6/ WHEEL, PE TUBE HAND WIND GRIP, TURBINE PLLY,3 STEP 00M,5M, SNAP RING E SPRING BELT TIGHTENER 050 HAND GRIP Page

23 DRIVE TRAIN GEARBOX, BIMA GI0 - AR4/5/6/ ROD, STOP LONG FOR BIMA (AR4-5) 4a 076 ROD, STOP LONG FOR BIMA (AR6-7) 4b 0466 EXTENTION FOR AUTO - ST6/ RETAINER PLATE, ADAPTER BIMA - AR4/5/6/ REGULATION SCREW SNAP RING E BAND, BRAKE BIMA - AR4/5/6/ DRUM, BRAKE BIMA - AR4/5/6/ SNAP RING E PIN 9X KEY 6 X BRAKE PLATE B GUIDE, ROD BIMA - AR4/5/6/ U-BOLT " M DISTRIBOR GUIDE PLATE ROD, BRAKE BIMA - AR4/5/6/ SPRING C SPRING B DOSIDIS SENCOR SUPPORT EASYDIS SENCOR SUPPORT PART 4a 0840 EASYDIS SENCOR SUPPORT PART SENSOR, CRUISE CONTROL - Page 3

24 DRIVE TRAIN TACH SUPPORT TACHOMETER ASM,0-400 FT/HR A SERIES PULLEY, TACH BIMA - AR4/5/6 46a 0445 TACH PULLEY (AR7) PULLEY,GREEN TACH BELT, TACH, DIA 3.5MM X 580MM BATTERY SUPPORT U-BOLT, M DISTRIBUTOR LEVER ROD END THREADED ROD DISTRIBUTOR FOR SHUT OFF VALVE 54a 039 DISTRIBUTOR FOR SHUT DOWN VALVE DISTRIBUTOR MT SHIELD, BLANK FOR AR4 AND AR5 56a 0477 SHIELD, BLANK FOR AR6 AND AR BATTERY SET SCREW X 8MM LONG 3 Page 4

25 Tubrine Drive Bima Gearbox Item Part Number Description Qty GEAR LEVER HUB HUB LEVER SLEEVE GEAR GEAR GEAR SHAFT HUB LEVER LEVER DOG HOUSING SHAFT GEAR HUB SHAFT WASHER HUB SHAFT GEAR LEVER HUB COVER PAD Page 5

26 Tubrine Drive Bima Gearbox PIN SHAFT SNAP RING, D4E SHAFT, SNAP RING, D0E SNAP RING, D30E SNAP RING D35E SNAP RING D80E OIL SEAL 0 X 35 X OIL SEAL 30 X 40 X OIL SEAL 40 X 6 X OIL SEAL CR OIL SEAL CR OIL SEAL CR SLEEVE 8X 0 X SLEEVE 0 X 3 X KEY 6 X 6 X KEY 8 X 7 X KEY 0 X 8 X KEY 0 X 8 X BEARING BEARING BEARING BEARING BEARING HK BEARING SPRING Page 6

27 Tubrine Drive Bima Gearbox SPRING SPRING BALL SLEEVE 5. X 4.9 X SLEEVE 5 X 35 X SLEEVE 30. X 39.8 X PIN 3.5 X 40 ISO PIN 5 X 4 ISO PIN 5 X 6 UNI PIN 6 X 0 UNI PIN 6 X 30 ISO PIN 6 X 36 XISO PIN 6 X 40 ISO PLUG D PLUG 3/8" GAS PLUG /" GAS PLUG RCA X PLUG RCA 35 X PLUG RCA 40 X PLUG 3/8" GAS GEAR SCREW M 8 X 30 UNI Page 7

28 ENGINE DRIVE Item Part Number Description Qty. a ENGINE,HONDA 4HP KEYED SH EXHAUST PIPE ST7 EXHAUST PIPE ST4 RETAINING RING E TANK, GAS 6 GAL PLASTIC W/FITTING HOSE,GAS /4X7/ BARB,HOSE BR /8 NPT X / BSHNG, RDCNG BR /4X/ NPPL,CLOSE BR /8 SCHD FILTER,GLASS BOWL FUEL FTG,TB STG /4MNPTX5/6TB TUBE,SYNFLEX 5/6 OD FTG,TB 90 /4NNPTX5/6TUB GAUGE, PRESS HAND WHEEL DISENGAGE/SPEED ROD PLATE, SHIFTER MT CLEVIS ROD END DISENGAGE LEVER EXHAUST PIPE SUPPORT ST7 9A 0847 EXHAUST PIPE SUPPORT ST PLATE, CLAMP GAS TANK MT. a b 0673 ft. 3.3 PLLY, STEP, 47 & 5MM 0MM BORE PLLY,TAPER, 47 & 5MM 0MM BORE Page 8

29 ENGINE DRIVE BEARING,FLANGE (0MM) BRACKET, JACKSHAFT BEARING-AG400K SHAFT, JACK - IRR ENGINE -AG4/5/6/7 (Straight Shaft ) 4a 0657 SHAFT, JACK - IRR ENGINE -AG4/5/6/7 (Tapered Shaft ) (not shown) GAUGE MT. ENGINE DRIVE ST a PLLY,75MM,53MM STEP W/SETSCR 0MM (Straight Shaft ) 6b 0658 PLLY,75MM,53MM STEP W/SETSCR 0MM ( Tapered Shaft) (not shown) PLLY,53MM,75MM STEP W/SETSCR 9MM (Straight Shaft ) 7a 0659 PLLY,53MM,75MM STEP W/SETSCR 9MM (Tapered Shaft )(not shown) 6-7a 4mm Woodruff Key (not shown) TANK MT. ENGINE ST LEVER GEARBOX SPEED CHANGE TACHOMETER ASM,0-400 FT/HR A SERIES SPEED ROD SUPPORT PLATE TACH FIX U-BOLT, M COMPENSATION TRIANGLE SUPPORT WASHER 8MM X 50MMX 5MM WASHER WHAND WHEEL 60 X 8MM COMPENSATION PLAT GUIDE ROD HONDA ENGINE REGULATION ROD ST4-5 40a 0803 HONDA ENGINE REGULATION ROD ST COMPENSATION TRIANGLE CABLE MT. ENGINE DRIVE CABLE 7MM X 90MM M8 Page 9

30 ENGINE DRIVE ACCELERATOR SCREW CABLE STOP SWITCH MT SWITCH 47a 0676 SENSOR HEAD FUEL FILTER /4"CLEAR WITH CLAMPS SPRING BELT TIGHTENER BELT TIGHTENER BEARING,6005-RS SHAFT,BELT IDLER PULLEY IDLER 3 GROOVE BELT AX 35 ST4-5 54a BELT AX 38 ST BELT AX 33 ST4 55a BELT AX 3 ST5-6 55b BELT AX 3 ST ENGINE SUPPORT ENGINE SUPPORT CLAMP ELBOW, ENGINE ST6-7 58a 0678 ELBOW, ENGINE ST4 58b 0678 ELBOW, ENGINE ST GEARBOX, BIMA GI0 - AG4/5/6/7 Page 30

31 ENGINE DRIVE Bima Gearbox Bima Gearbox No. Part Number Description Qty GEAR LEVER HUB HUB LEVER ?? SLEEVE GEAR GEAR GEAR SHAFT HUB LEVER LEVER DOG HOUSING SHAFT GEAR HUB SHAFT WASHER HUB SHAFT GEAR Page 3

32 ENGINE DRIVE Bima Gearbox LEVER HUB COVER PAD PIN SHAFT SNAP RING, D4E SNAP RING, D8E SNAP RING, D0E SNAP RING, D30E SNAP RING D35E SNAP RING D80E OIL SEAL 0 X 35 X OIL SEAL 30 X 40 X OIL SEAL 40 X 6 X OIL SEAL CR OIL SEAL CR OIL SEAL CR SLEEVE 8X 0 X SLEEVE 0 X 3 X KEY 6 X 6 X KEY 8 X 7 X KEY 0 X 8 X KEY 0 X 8 X Page 3

33 ENGINE DRIVE Bima Gearbox BEARING BEARING BEARING BEARING ? BEARING HK BEARING SPRING SPRING SPRING BALL SLEEVE 5. X 4.9 X SLEEVE 5 X 35 X SLEEVE 30. X 39.8 X PIN 3.5 X 40 ISO PIN 5 X 4 ISO PIN 5 X 6 UNI PIN 6 X 0 UNI PIN 6 X 30 ISO PIN 6 X 36 XISO PIN 6 X 40 ISO PLUG D PLUG 3/8" GAS PLUG /" GAS Page 33

34 ENGINE DRIVE Bima Gearbox PLUG RCA X PLUG RCA 35 X PLUG RCA 40 X PLUG 3/8" GAS SCREW M 5 X 6 UN SCREW M 8 X 30 UNI Page 34

35 Turbine 0/50 Item Part Number Description COVER, 0/50 TURBINE O-RING DIA. 03 X IMPELLER 5.43 X.5VANE H SHIM,MYLLAR 6.X3.8X SPACER DIA.5MM X 0MM X.5MM SPACER,5MM X 6MM X 7MM SEAL,0 X KEY 5 X IMPELLER SHAFT KEY 6 X BEARING,604-RS SPACER, 5MM X 0MM X 0.MM STOP RING I RETAINING RING E COMMAND PLATE SENSOR TURBINE PLLY,00MM,75MM,53MM3STEP W/SETSCR BELT, 4L7 OR A69 7a BELT, 4L7 OR A70 7b BELT, 4L73 OR A7 7c BELT, 4L56 OR A54 7d BELT,A REGULATOR FLAP O-RING 8.73MM ID X.78MM CS CONTROL LEVER FLAP SPRING BELT TIGHTENER Page 35

36 Turbine 0/ CABLE STOP CABLE ATTACHMENT CABLE MOUNT CABLE FLAP GRIP, TURBINE LEVER,BY-PASS LEVER, BY-PASS - 0/ SHAFT,BYPASS W/O GROOVES DISC. BY-PASS SCREW,6-MM X 6MM BODY,TURBINE 0/ O-RING DIA X BY-PASS LEVER ELBW,UPPER (COMER BOX)-ST4 35a ELBW,UPPER (COMER BOX)-ST5 35b 0840 ELBW,UPPER 6"FLNG TO WELD(COMER)AR5 35c 000 ELBW,UPPER COMER ST6-7 35d 05 ELBW,UPPER (BIMA BOX)-AR4 35e 084 LONG ELBW,UPPER 8"FLNG TO WELD(BIMA)-AR5 35f LITTLE ELBW,UPPER 8"FLNG TO WELD(BIMA)-AR5 35g 00 ELBW,UPPER AR6-7 (BIMA GEARBO GASKET, DN ELBOW ADAPTOR ST5-ST O-RING,DIA X a O-RING 04MM X 3.53MM HAND WHEEL Page 36

37 Turbine 0/ LOWER FEEDING ELBOW FOR VALVE & SUP NIPPLE WITH FLANGE NIPPLE WITH FLANGE AND BAUER 3"/ 4a 0893 NIPPLE WITH FLANGE AND BAUER 4" SEAL RING 3.5" 5.5ODX.5 43A SEAL RING 4" 6-3/8 OD X 9/6 44g NIPPLE WITH FLANGE AND NPPL "/ NIPPLE WITH FLANGE AND NIPPLE "/ NIPPLE WITH BAUER 3"/ 46a NIPPLE WITH BAUER 4" 47o NIPPLE WITH BAUER 3"/ NPPL "/ NIPPLE WITH BAUER 4"NPPL "/ GAUGE COCK GAUGE, PRESS SENSOR SUPPORT SENSOR, CRUISE CONTROL Page 37

38 Turbine 5/30 Item Part Number COVER,IMPELLER O-RING 78.99MM ID X 3.53C/S IMPELLER 6.77ODX.87 VANE IMPELLER 6.77ODX.5 VANE IMPELLER 6.77ODX.4 VANE SHIM,MYLLAR 6.X3.8X SPACER,5MM X 6MM X 5.5MM LONG SPACER,5MM X 6MM X 7MM SPACER 5MM X 0MM X 5MM BODY,TURBINE 5/ SEAL,0 X 6 8a KIT, RUNNER OVERHAUL - 5/0 (would recomend customer buy kit in place of seal) This kit includes # & O-RING.36 ID X.03 C/S O-RING,.487"ID X.03"CS TURBINE HUB T 00 5/ KEY 5 X SHAFT,IMPELLER 5/ KEY 6 X BEARING,604-RS SPACER DIA. 5 X 0 X BEARING,504-RS STOP RING I RETAINING RING E0 Description 6 Page 38

39 Turbine 5/ COMMAND PLATE SENSOR TURBINE PLLY,00MM,75MM,53MM3STEP W/SETSCR BELT, 4L7 OR A69 a BELT, 4L7 OR A70 b BELT, 4L73 OR A7 c BELT, 4L75 OR A73 d BELT,A55 e BELT,4L58 OR A56 f BELT,4L59 OR A57 g BELT, 4L6 OR A SPRING BELT TIGHTENER LEVER, BYPASS O-RING 5.54MM ID X.6MM KEY SCREW,6-MM X 6MM DISC,BY PASS SHAFT,BYPASS W/GROOVES LEVER, BY-PASS - 5/ REGULATOR FLAP WITH PIN O-RING 8.73MM ID X.78MM CS HAND WHEEL LOOP, COMPENSATOR - 0/50, 5/ FLAP STOP CONTROL LEVER FLAP CABLE MOUNT Page 39

40 Turbine 5/ CABLE,COMP CONTROL(05")-AR4/5 38a 000 CABLE,COMPENSATOR CONTROL(0")-AR6/7 39d 05 ELBW,UPPER (BIMA BOX)-AR4 39e 084 ELBW,UPPER 8"FLNG TO WELD(BIMA)-AR5 39g 00 UPPER ELBOW W/BIMA GEAR BOX ST6/ GAUGE COCK GAUGE, PRESS O-RING 04MM X 3.53MM LOWER FEEDING ELBOW FOR VALVE GASKET, DN NIPPLES WITH FLANGE NIPPLES WITH FLANGE AND BAUER 4" SEAL RING 4" 6-3/8 OD X 9/ NIPPLE WITH FLANGE AND NIPPLE THREADED "/ NIPPLE WITH FLANGE AND NIPPLE THREADED "/ NIPPLE WITH FLANGE BAUR 3"/ 5a FITTING, ENTRY - 5/0 TURBINE 4" BAUER NIPPLE WITH BAUR 3"/ W/NIP THREAD NIPPLE WITH BAUR 4"W/NIP THREAD"/ LEVER,BY-PASS GRIP, TURBINE SENSOR, SUPPORT SENSOR, CRUISE CONTROL CABLE ATTACHMENT CABLE STOP 60 NIPPLE FOR VAS 3" 6 NIPPLE THREADED FOR VAS 4" 6 NIPPLE THREADED FOR VAS 4" Page 40

41 GUN CART ST4 Item Part Number Description Qty. a 0653 BODY, GUNCART W/BALL PLUG FITTING a 0654 LEGS SUPPORT U-BOLT, M6 4a 065 LEG, LEFT 5a 065 LEG, RIGHT 6a WHEEL TIRE ASSY R WHEEL, AND TIRE 8 SPINDLE AXLE, FRONT GUNCART GASKET, 5.75"BCD 4.3 ID GASKET,RISER 5. BCD 3-/ ID RISER EXTENSION 3-/X (SR00) WEIGHT CHAIN,3/8 PROOF COIL ZINC PLATED ft. 3 4a CLEVIS,DBL CMBL (not as shown) 4b HITCH, CHAIN Page 4

42 GUN CART ST Item Part Number Description BODY, GUN CART MAIN FRAME - ST6/ LEG, RIGHT, OFFSET, OUTER, 34" HGT LEG, LEFT, INLINE, INNER, 34" HGT CART STIRRUP COUPLER HOSE 00 X 8MM, 33" LONG SUPRA CLAMP 04MM-MM WEIGHT, CART BALLAST (" OR 60MM) HITCH, CHAIN CLEVIS,DBL CMBL AXLE, GUNCART FRONT - AR6/ CHAIN,3/8 PROOF COIL PLTD FRONT WHEEL /6" 4.50/6"U5 a BEARING, 605 RS b SPACER, CART FRONT AXLE - A-SERIES GASKET, 5.75"BCD 4.3 ID CAP PLUG 7MM X 70MM ARM GUNCART PULL PLATE, CLAMP LARGE CLAMP PLATE SMALL GASKET,RISER 5. BCD 3-/ ID RISER EXTENSION 3-/X (SR00) GUN CART BODY FRONT FOR 34" LEG CART PIN,HITCH 3/4X3 T HEAD SPINDLE ASSY.COMPLETE FOR FLEX BODY (spindle alone not available) SEAL, FOR FLEX BODY CART 4/ BEARING, TAPERED ROLLER 3004 (both race and bearing comes together) HUB, WHEEL - AA Lug Nut Page 4 ft. Qty

43 GUN CART ST / BEARING, TAPERED ROLLER 3005 (both race and bearing comes together) BUSH,MACH -/XX8GA NUT, SPINDLE 8MMX DUST CAP WHEEL TIRE ASSY R FLANGE,ADAPTOR GUN TO NELSON DRAWBAR EXT PIN, 5MM X 70MM BRACKET, CHAIN, STD GUNCART Page 43

44 8 HP Booster Pump Break Down No. Part Number Description Qty. ENG,HONDA 8HP THREADED PUMP SHAFT CASING, -/ X -/, 8HP PUMP IMPELLER, 7.5 X " KEY SHAFT 8HP GASKET, 8HP PUMP SEAL,MECHANICAL -/4" SLEEVE,-/4 X." 8-//9HP ADAPTOR, 8HP PUMP FLINGER, 8-/ AND 9 HP PUMPS 0 DRAIN PLUG STUD 4 3 WASHER, LOCK 4 4 DRAIN PLUG 5 BOLT 4 0 Nut 4 Page 44

PARTS MANUAL AR4(T/E 30A/980)

PARTS MANUAL AR4(T/E 30A/980) 00 S. Schrader Ave. P.O. Box 290 Havana, IL 62644 USA Phone: 09.4.442 Fax: 09.4.494 PARTS MANUAL AR4(T/E 0A/90) AR(T/E 0A/200) AR(T/E A/20) AR6(T/E A/200) AR6(T/E A/00) AR(T/E 40A/900) AR(T/E 40A/20) S/N