BLAZE NEON 24V LED Strip Light

Transcription

1 diode led a division of elemental ED BAZE NEON 24V ED Strip ight TOP EMITTING STRIP IGT SPECIFICATION SEET DIMMABE 24VDC UV RESISTANT DRY/ET OCATION IP65 Item # Project TE-NB1 TE-NB2 TE-NB4 Voltage/attage 24V / 1.22/ft. 24V / 2.44/ft. 24V / 4.4/ft. 2700K 86 m/ft. 173 m/ft. 248 m/ft. 3500K 89 m/ft. 178 m/ft. 273 m/ft. 6300K 88 m/ft. 174 m/ft. 266 m/ft. Green 88 m/ft. 148 m/ft. Coming Soon umens 1 Blue 18 m/ft. 30 m/ft. Coming Soon Purple Coming Soon 2 m/ft. Coming Soon Pink Coming Soon 93 m/ft. Coming Soon Red 31 m/ft. 61 m/ft. Coming Soon Gold Coming Soon 157 m/ft. Coming Soon Max. Run 2 65 feet 32 feet 16 feet Cut Points 2 inch 2 inch 2 inch CRI 80+ Dimmable Yes Field Cuttable Yes Dimensions 0.59 x 0.65 in. ( x ) (Strip Only) Environment* Outdoor / et ocation / IP65 Certification U isted 2108 arranty 12-Year arranty *ARNING: NOT FOR USE IN SUBMERSIBE APPICATIONS SKU Builder DI - 24V - TE Voltage Chip Facing Model Color ength NB1 27 GN PK 16 (NB4 only) NB2 35 B RD 32 (NB2 only) NB4 63 PU G 65 (NB1 only) Example: DI-24V-TE-NB2-RD-32 = Diode, 24 Volt, BAZE NEON, Top emitting, 2.44w/ft, Red, 32.8 foot spool Elemental ED, Inc. All rights reserved. Specifications are subject to change without notice. Toll Free: Fax: info@diodeed.com SPEC SEET BAZE NEON 24V ED STRIP IGT SS OF 7

2 SPECIFICATIONS Input: 24VDC Constant Voltage Material: UV/IR resistant silicone Mounting (sold separately): Bottom U-Clip, Top U-Clip Connections: 96" eads: 22/2 AG et ocation Screw Connector Ambient Temp 4 : F (-20 ~ 50 C) Operating Temp 5 : F (-20 ~ 80 C) Flammability 6 : Flame retardant BAZE NEON 24V ED Strip ight TOP EMITTING STRIP IGT SPECIFICATION SEET MECANICA DIAGRAMS BAZE NEON 24V ED Strip ight Top emitting.65" COMPIANCE & REGUATORY APPROVAS Safety U isted 2108 ow Voltage ighting Systems. Certified for United States and Canada. File # E Performance ED chip data measured in accordance to IES M Photometric & Colorimetry data measured in accordance to IES M-79-08, in Elemental ED's Innovation ab. COMPATIBE DRIVERS Additional information on compatible Drivers can be found on page 4-6 or on the Diode ED web site at: Top emitting bend.59" 1. umen value measured in accordance to IES M-79. ED chips have a luminous flux range with a tolerance of +/- 5%. 2. Each maximum run requires a dedicated power feed from the driver. Do not extend beyond the recommended maximum run length. 3. Actual efficacy value is dependent on specified ED driver (power supply). An estimated efficacy value can be calculated as follows: umen value divided by average power consumption per foot. 4. Do not install product in an environment outside the listed ambient temperature. Exceeding the maximum ambient temperature may damage ED chips, reduce the total lamp life, lumen output, and/or adversely impact color consistency. 5. Operating temperature is measured according to the minimum and maximum ambient temperature environment. 6. This product has been tested and passed glow-wire flammability tests (GFI index) at 650 C/1200 F, providing an extra level of safety for common areas, hospitality, and areas of high risk fire. SPEC SEET BAZE NEON 24V ED STRIP IGT SS OF 7

3 ADDITIONA ACCESSORIES Accessories listed below are fully compatible with our BAZE NEON 24V ED Strip ight product line. Further information on these products and more accessories can be found in our latest catalog or online at BAZE NEON 24V ED Strip ight TOP EMITTING STRIP IGT SPECIFICATION SEET Bottom wire entry connector DI-TE-NB-BC-EC Straight wire entry connector DI-TE-NB-STC-EC Bottom wire entry connector cover ength: 96" Straight wire entry connector cover ength: 96" (Included with bottom wire entry connector).76".89" 1.36" (Included with straight wire entry connector) Side wire entry connector DI-TE-NB-SDC-EC Side wire entry connector cover.76".89" 1.36" End Cap ength: 96" (Included with all Connectors) Bottom U-Clip DI-TE-NB-BUC-16.76".8".68".38".78".98" (Included with side wire entry connector).76".89" 1.36" Top U-Clip DI-TE-NB-TUC-16.64" 1.44".62" Channel DI-TE-NB-TUC-16 35".38".78" SPEC SEET BAZE NEON 24V ED STRIP IGT SS OF 7

4 BAZE NEON 24V ED Strip ight TOP EMITTING STRIP IGT SPECIFICATION SEET ED DRIVERS (Required) The following isted ED Drivers are recommended for compatibility and to meet NEC code when installed according to specifications. For additional ED Driver options see Diode ED's product page at: SITCEX DRIVER + DIMMER SITC SITCEX combines an ED driver and ED dimmer switch into a single integrated unit. Fits into standard switch boxes. Voltage Power DI 24V SE 60 SPEC SEET SKU - ENGT - IDT - EIGT DI-24V-SE in in in. DI-24V-SE in in in. Fits in Standard Switch Box Switch Box (Sold Separately) SITCEX Trim Plate (Sold Separately) O-PRO JUNCTION BOX & DRIVER COMBO - 24V CONSTANT VOTAGE ED DRIVER Use Constant Voltage Drivers to power your lighting system. Compatible with Standard 120VAC On/Off Switches, REIGN ow Voltage Dimmers, TOUCDIA Control System, DMX Decoders, and PM Controls. DI 0970 Junction Box PS SPEC SEET SKU - ENGT - IDT - EIGT DI-0970-PS in in in. DI-CV-M24V PS in in in. DI-CV-M24V PS in in in. DI-0954-P 13.5 in. 4.5 in in. O-PRO JUNCTION BOX & DRIVER COMBO - 24V COMMERCIA GRADE 0-10V ED DIMMABE DRIVER Compatible with 0-10V controls and dimming systems. DI-DM M24V60 Junction Box 0-10V PS SKU - ENGT - IDT - EIGT DI-DM-M-24V V-PS in in in. DI-DM-M-24V V-P 13.5 in. 4.5 in in. SPEC SEET SPEC SEET BAZE NEON 24V ED STRIP IGT SS OF 7

5 BAZE NEON 24V ED Strip ight TOP EMITTING STRIP IGT SPECIFICATION SEET ED DRIVERS Cont. (Required) The following isted ED Drivers are recommended for compatibility and to meet NEC code when installed according to specifications. For additional ED Driver options see Diode ED's product page at: OMNIDRIVE 2 EECTRONIC DIMMABE ED DRIVER OMNIDRIVE 2 features a zero minimum load and 100-5% dimming range. Compatible with Forward Phase and Reverse Phase Dimmers. Please see Diode ED's Compatibility ist at: DI OD2 24V24 SPEC SEET SKU - ENGT - IDT - EIGT DI-OD2-24V in in in. DI-OD2-24V in in in. DI-OD2-24V in in in. DI-OD2-24V in in in. DI-OD2-24V in in in. i-lume 1% ED DIMMABE DRIVER i-lume 1% ED Driver has a minimum load of 5 and dims from 100-1%. 3-ire or 2-ire Dimmers DI-DM 24V40 3D 3D SPEC SEET TE SPEC SEET SKU - ENGT - IDT - EIGT DI-DM-24V40-3D 4.89 in in in. DI-DM-24V40-TE i-lume Premier 0.1% ED DIMMABE DRIVER i-ume Premier 0.1% ED Driver has a minimum load of 5 and dims from %. DI-DM 24V96 3D SPEC SEET SKU - ENGT - IDT - EIGT DI-DM-24V96-3D 5.50 in in in. SPEC SEET BAZE NEON 24V ED STRIP IGT SS OF 7

6 ED DRIVERS (Required) BAZE NEON 24V ED Strip ight TOP EMITTING STRIP IGT SPECIFICATION SEET The following isted ED Drivers are recommended to meet NEC code when installed according to specifications. For additional ED Driver options see Diode ED's product page at: VM SERIES CONSTANT VOTAGE DRIVER Use Constant Voltage Drivers to power your low voltage tape light. Compatible with Standard 120VAC On/Off Switches, REIGN 12-24V ow Voltage Dimmers, TOUCDIA Control System, DMX Decoders, and PM Controls. VM - 24 SPEC SEET attage Voltage SKU - ENGT - IDT - EIGT VM in..75 in..77 in. VM in. 1 in..77 in. SPEC SEET BAZE NEON 24V ED STRIP IGT SS OF 7

7 BAZE NEON 24V ED Strip ight TOP EMITTING STRIP IGT SPECIFICATION SEET ADDITIONA INFORMATION BAZE NEON 24V ED STRIP IGT Installation Guide SAFETY / ARNINGS / DISCOSURES 1. Install in accordance with national and local electrical code regulations. 2. This product is intended to be installed and serviced by a qualified, licensed electrician. 3. Only install with a listed Class 2 DC ED Driver. 4. Not for use in or on walls of pools, fountains, or other partially or fully submersed locations. 5. Do not modify or disassemble product beyond instructions or this warranty will be void. 6. Actual color may vary from what is pictured above and on other print materials due to the limitations of photographic processes. 7. e reserve the right to modify and improve the design of our fixtures without prior notice. e cannot guarantee to match existing installed fixtures for subsequent orders or replacements in regards to product appearance, CCT, or lumen output. ARRANTY imited arranty This product has a twelve (12) year limited warranty from the date of shipment. This warranty does not include the additional accessories referenced in this specification sheet. Complete warranty details for fixtures and additional accessories are available at within the Policies section. For warranty related questions please contact product support. Consumer s Acknowledgment Elemental ED, Inc. stands behind its products when they are used properly and according to our specifications. By purchasing our products, the purchaser agrees and acknowledges that lighting design, configuration and installation is a complex process, wherein seemingly minor factors or changes in layout and infield adjustments can have a significant impact on an entire system. Choosing the correct components is essential. Elemental ED is able to work with the original purchaser to make an appropriate product selection to the extent of the limited information that the customer can provide, but it is virtually impossible for Elemental ED to design a system that foresees every unknown factor. For this reason, this arranty does not cover problems caused by improper design, configuration or installation issues. Any statement from an Elemental ED employee or agent regarding a customer s bill of goods and/or purchase order is NOT an acknowledgment that the products purchased are designed and configured correctly. The purchaser agrees and acknowledges that it is the customer s responsibility to adhere strictly to all information contained in the Product Specification Sheets. There is often more than one way to design, configure and layout an ED lighting application properly to achieve the same lighting effect. Elemental ED strongly recommends that licensed professionals be used in the design and installation of lighting systems that include Elemental ED products. The specifications include important information that a designer and installer should carefully review and strictly follow. Qualified designers and certified and/or licensed installers, with access to the final installation environment, customer goals, and Elemental ED product specifications can make the requisite decisions appropriate for a successful finished lighting application. diode led a division of elemental ED 2017 Elemental ED, Inc. All rights reserved. Specifications are subject to change without notice. Toll Free: Fax: info@diodeed.com SPEC SEET BAZE NEON 24V ED STRIP IGT SS OF 7