GTFLOW MANIFOLD FEATURES: BENEFITS:

Transcription

1

2 GTFLOW MANIFOLD AND ACCESSORIES GTFlow is our line of manifolds which includes all accessories needed for a complete radiant floor system. GTFlow is made with high quality brass which comes to you preassembled in either 5 or 10 loop expandable configurations. Installers will simply remove the preassembled manifold from the box and mount to a wall ready for immediate use. The GTFlow installation is clean and professional and offers a long life of reliable operation. The operation of GTFlow has reliable flow balancing in each port using the supply side port valves and can be read on the flow meters in each port on the return side. GTFlow comes with temperature gauges on both the supply and return side to allow operators to see the temperature coming into the manifold and the temperature returning to the heating source. FEATURES: Flow balancing in each port using port valves and flow meters Temperature gauges on supply and return side Air bleed valve Drain valves Open and close valves on supply and return Wall mount 1 FTP supply (we offer ¾ adaptors) ¾ MTP ports (we offer ½ adaptors) BENEFITS: Accurate Loop balancing Temperature gauging Made of high grade brass Reliable system with o-ring seals Quick installation with a professional appearance Expandable High Flow capacity 5.1.1

3 C C GTFLOW MANIFOLD KIT PEX READY TM TECHNICAL PLAN Water Supply B 12 5B 12 7B 6 11 Water Return A 7A A x 8 screw x 2 CCR x 2 CCR100 (optional) 17 (optional) 12 Components 1 - Return Ball Valve (Blue) 2 - Port Valves 3A, 3B - Automatic Air Vent and Bleeding Valve 4 - Wall-Mounting Brackets 5A - with Port Valves 5B - with Flow Met ers 6 - Core Port 7A, 7B - Temperature Gauge 8 - Flow Meter 9 - Supply Ball Valve (Red) 10 - PEX Male Threaded Adaptor 11 - Compression Fitting 12 - Manifold-Mounting Brackets 13 - Flow Meters Base Cap (Black) 14 - Manifold-Mounting Bracket Screw (8) 15 - Copper Crimp Ring: 2x 3/4 + 2x Manifold Port Cap (optional) 17-4 Wires Thermal Actuator (optional) Applicable to the following models of GTFLOW : MANK MANK MANK MANK MANK MANK MANK MANK MANK MANK MANK MANK MANK MANK MANK MANK GTFLOW Manifold uses GTFLOW Manifold adapters only. Please refer to GTFLOW Manifold adapters list

4 GTFLOW EXTENSION MANIFOLD PEX READY TM TECHNICAL PLAN B A 6 15 x 8 screw 12 Components: 2 - Port Valves 4 - Wall-Mounting Brackets 5A - with Port Valves 5B - with Flow Met ers 6 - Core Port 8 - Flow Meter 12 - Compression Fitting 13 - Manifold-Mounting Brackets 14 - Flow Meters Base Cap (Black) 15 - Manifold-Mounting Bracket Screw (8) 16 - Connector Applicable to the following models of GTFLOW : MANK X MANK X GTFLOW Manifold uses GTFLOW Manifold adapters only. Please refer to GTFLOW Manifold adapters list

5 MANIFOLD REPLACEMENT PARTS PART # MANB-RBV100-B MAN-AABV100 INCLUDED PARTS (REFER TO TECHNICAL PLAN COMPONENT NUMBER) 1, 7A 3A, 3B DESCRIPTION 1 Threaded Female Blue Ball Valve, Temperature Gauge, Ball Balve Core Connector, O-ring Automatic Air Vent and Bleeding Valve, Ball Valve, O-ring, Cap, PEX Adapter MAN-MB 4, 13, 15 Mounting Bracket MANCOPV 2, 5A, 6 Port with blue Port Valves MANCOFM 5B, 6, 8, 14 Port with red Flow Meters MANB-SBV100R SC034P100M SC100P100M 9, 7B 10 1 Threaded Female Red Ball Valve, Temperature Gauge, Ball Valve Core Connector, O-ring 3/4 PEX x 1 Male Threaded Adapter 1 PEX x 1 Male Threaded Adapter CCR034 + CCR Copper Crimp Rings (2 x ¾ + 2 x 1 ) MANPA 12 Compression Fitting 5.1.4

6 3 PORTS RADIANT FLOOR MANIFOLD SPECIFICATIONS EXTENSIONS PART NUMBER MANK X EXTENSION MANIFOLD MANK X EXTENSION MANIFOLD MANK MANK MANK MANK Diameter 1 BSP (no converter) 1 BSP (no converter) 1 BSP 1 BSP 1 BSP 1 BSP SUPPLY AND RETURN VALVE INLET DIAMETER n/a n/a 1 FNPT 1 FNPT 1 FNPT 1 FNPT Supply and Return PEX Adaptors Replaced by 2 Connectors 1 (MANCC100M) Replaced by 2 Connectors 1 (MANCC100M) 3/4 PEX 3/4 PEX 1 PEX 1 PEX Port Thread Diameters Male Male Male Male Male Male Compression Fittings Copper Crimp Rings 1/2 PEX 5/8 PEX 1/2 PEX 5/8 PEX 1/2 PEX 5/8 PEX n/a n/a 2 x ¾ + 2 x 1 2 x ¾ + 2 x 1 2 x ¾ + 2 x 1 2 x ¾ + 2 x 1 NUMBER OF LOOPS 3 Loops 3 Loops 3 Loops 3 Loops 3 Loops 3 Loops NUMBER OF PORTS 6 Ports 6 Ports 6 Ports 6 Ports 6 Ports 6 Ports PEX PORT ADAPTERS (METRIC) MAXIMUM CON- STANT TEMPERATURE MAX RECOMMENDED PRESSURES PER LOOP (PEX ASTM STANDARDS) 6 x 1/2 6 x 5/8 6 x 1/2 6 x 5/8 6 x 1/2 6 x 5/8 200F (93.v3C) 200F (93.v3C) 200F (93.3C) 200F (93.3C) 200F (93.3C) 200F (93.3C) 73.4F (23C), 180F (82.2C), 200F (93.3C) MAX FLOW INSIDE MANIFOLD CORE > 16 GPM (60.57L/MIN); PER CIRCUIT > 2 GPM (7.57L/MIN) RECOMMENDED PER CIRCUIT > 1.32 GPM (5.00L/MIN) MANIFOLD KIT Supply Manifold, Return Manifold, 2 Connectors 1 and Compression Fittings, Wall Brackets Supply Manifold, Return Manifold, 2 Connectors 1 and Compression Fittings, Wall Brackets Supply Manifold, Return Manifold, 2 Inlet Metric to Standart Converters, Wall Brackets, and Compression Fittings 5.1.5

7 4 PORTS RADIANT FLOOR MANIFOLD SPECIFICATIONS PART NUMBER MANK MANK MANK MANK Diameter 1 BSP 1 BSP 1 BSP 1 BSP SUPPLY AND RETURN VALVE INLET DIAMETER OF PEX SUPPLY AND RETURN 1 FNPT 1 FNPT 1 FNPT 1 FNPT 3/4 PEX 3/4 PEX 1 PEX 1 PEX CORE MANIFOLD PORT DIAMETERS OF PEX PORT 1/2 PEX 5/8 PEX 1/2 PEX 5/8 PEX NUMBER OF LOOPS 4 Loops 4 Loops 4 Loops 4 Loops NUMBER OF PORTS 8 Ports 8 Ports 8 Ports 8 Ports PEX PORT ADAPTERS (METRIC) MAXIMUM CON- STANT TEMPERATURE MAX RECOMMENDED PRESSURES PER LOOP (PEX ASTM STANDARDS) MAX FLOW 8 x 1/2 8 x 5/8 8 x 1/2 8 x 5/8 200F (93.3C) 200F (93.3C) 200F (93.3C) 200F (93.3C) 73.4F (23C), 180F (82.2C), 200F (93.3C) INSIDE MANIFOLD CORE > 16 GPM (60.57L/MIN); PER CIRCUIT > 2 GPM (7.57L/MIN) RECOMMENDED PER CIRCUIT > 1.32 GPM (5.00L/MIN) MANIFOLD KIT Supply Manifold, Return Manifold, 2 Inlet Metric to Standart Converters, Wall Brackets, and Compression Fittings 5.1.6

8 5 PORT RADIANT FLOOR MANIFOLD SPECIFICATIONS PART NUMBER MANK MANK MANK MANK Diameter 1 BSP 1 BSP 1 BSP 1 BSP SUPPLY AND RETURN VALVE INLET DIAMETER OF PEX SUPPLY AND RETURN 1 FNPT 1 FNPT 1 FNPT 1 FNPT 3/4 PEX 3/4 PEX 1 PEX 1 PEX CORE MANIFOLD PORT DIAMETERS OF PEX PORT 1/2 PEX 5/8 PEX 1/2 PEX 5/8 PEX NUMBER OF LOOPS 5 Loops 5 Loops 5 Loops 5 Loops NUMBER OF PORTS 10 Ports 10 Ports 10 Ports 10 Ports PEX PORT ADAPTERS (METRIC) 10 x 1/2 10 x 5/8 10 x 1/2 10 x 5/8 MAXIMUM CONSTANT TEMPERATURE 200F (93.3C) 200F (93.3C) 200F (93.3C) 200F (93.3C) MAX RECOMMENDED PRESSURES PER LOOP (PEX ASTM STANDARDS) 73.4F (23C), 180F (82.2C), 200F (93.3C) MAX FLOW INSIDE MANIFOLD CORE > 16 GPM (60.57L/MIN); PER CIRCUIT > 2 GPM (7.57L/MIN) RECOMMENDED PER CIRCUIT > 1.32 GPM (5.00L/MIN) MANIFOLD KIT Supply Manifold, Return Manifold, 2 Inlet Metric to Standart Converters, Wall Brackets, and Compression Fittings 5.1.7

9 10 PORT RADIANT FLOOR MANIFOLD SPECIFICATIONS PART NUMBER MANK MANK MANK MANK Diameter 1 BSP 1 BSP 1 BSP 1 BSP SUPPLY AND RETURN VALVE INLET DIAMETER OF PEX SUPPLY AND RETURN 1 FNPT 1 FNPT 1 FNPT 1 FNPT 3/4 PEX 3/4 PEX 1 PEX 1 PEX CORE MANIFOLD PORT DIAMETERS OF PEX PORT 1/2 PEX 5/8 PEX 1/2 PEX 5/8 PEX NUMBER OF LOOPS 10 Loops 10 Loops 10 Loops 10 Loops NUMBER OF PORTS 20 Ports 20 Ports 20 Ports 20 Ports PEX PORT ADAPTERS (METRIC) 20 x 1/2 20 x 5/8 20 x 1/2 20 x 5/8 MAXIMUM CONSTANT TEMPERATURE 200 F (93,3 C) 200 F (93,3 C) 200 F (93,3 C) 200 F (93,3 C) MAX RECOMMENDED PRESSURES PER LOOP (PEX ASTM STANDARDS) 73.4F (23C), 180F (82.2C), 200F (93.3C) MAX FLOW INSIDE MANIFOLD CORE > 16 GPM (60.57L/MIN); PER CIRCUIT > 2 GPM (7.57L/MIN) RECOMMENDED PER CIRCUIT > 1.32 GPM (5.00L/MIN) MANIFOLD KIT Supply Manifold, Return Manifold, 2 Inlet Metric to Standart Converters, Wall Brackets, and Compression Fittings 5.1.8

10 ACCESSORIES USE ONLY WITH GTFLOW MANIFOLD The GTFLOW Manifold must be used with GTFLOW adapters. PART NUMBER INSIDE QTY/BAG QTY/BOX QTY/CASE DIAMETER (pcs) (pcs) (pcs) MANACT4-24V-30-U N/A N/A wires GTFLOW manifold Actuator MANPA012P034F 1/2 x 3/ MANPA058P034F 5/8 x 3/ Compression Fitting MANEC034F 3/4 FPT Manifold Port Cap MANCC100M Connector Please verify product availability with your local representative. Other specifications available on special demand